Piercing NozzlesSewer Nozzles

Soft sediments are deposited on the bottom of the sewer pipes, and over time, these layers stack on top of one another to form a fairly hard layer.To eliminate the blockage and clean up these sediments, the nozzle needs both the power of thrust and the ability to easily open the path ahead. Therefore, the best option for sediment removal operation is the Piercing Nozzle.Made of stainless steel, the Piercing Nozzle is a modified version of the Egg Nozzle, which also has a hole at the front. Likewise, it is resistant to toxic and abrasive

chemical environments. The body part of the nozzle is covered with hard materials, having the least vulnerability while moving through the pipe.The nozzle is designed in 1” and ¾” sizes, which are ideal for drainage pipes of 2 to 18 inches.In order to achieve the proper selection and best performance of this nozzle, please specify the exact working pressure and flow rate. Then select the proper product from the Insert Nozzle section in the High-Pressure Nozzles category.

Insert Nozzle

L

SW

D

A

Order Number Part NumberW.P.

ConnectionD

(mm)L

(mm)Insert

Nozzles No.Insert Size

ASW

(mm)Q

(l/min)Weight

(kg)bar psi

PRC01 PRC3-B24-FB-01 250 3650 Female-1" BSPP 58 90 7 M10x1.5 6x30° 48 50-250 1

Piercing NozzlesSewer Nozzles

E8