SHOP KIT

SEWING MACHINE COVER | SEWING

Copyright © 2014 Coats PLC

Protect your sewing machine from dust and brighten your sewing room with our Sewing Machine Cover. Pockets help keep accessories handy.

Finished size of organizer: 18” wide x 13” high x 8“ deep

Materials needed:– 1 spool Coats Dual Duty XP All Purpose Thread color 1 White– 1 yard green print, for cover, FreeSpirit True Colors by

Heather Bailey PWTCO12.OLIVE– 1 yard Coordinating solid for lining, S21 OLIVE– 3 fat quarters Coordinating prints for pockets, FreeSpirit

True Colors by Heather Bailey, PWTC015.DOVEX,PWTC014.ORCI, PWTC011.PINKX

– 2 yards fusible fleece

Additional Requirements– Sewing Machine– Hand sewing needleWe used selections from True Colors by Heather Bailey forFreeSpirit Fabrics

Technique: Machine Sewing

Skill Level: Beginner/Easy

Crafting time: An Evening

DDS0501-026167M | LAST UPDATED: AUGUST 1, 2019 SEWING MACHINE COVER | SEWING 1 of 2

SEWING MACHINE COVER | SEWING

makeitcoats.com

Project #CS0159 Copyright © 2014 Coats PLC

Directions:Cut the following:18 ½ x 13 ½ inch rectangles, 2 each from outer cover fabric, lining and fusible fleece

8 ½ x 44” strip, 1 each from outer cover fabric, lining and fusible fleece

12 ½ x 6 ½ inch strips of 3 coordinating fabrics for pockets

6 ¼ x 18 ½ inch strip of fusible fleece for pockets

NOTE: All seam allowances are ¼ inch and are included in the given measurements.

1. Fuse the fleece to the wrong sides of the fabrics for theouter cover.

2. Using a saucer as a pattern round off the top left andright corners, leaving the 2 remaining corners squared.Repeat with the lining fabric.

3. Stitch the long sides of the 3 green/pink pocket piecestogether. Fuse the 6 ¼ x 18 ½ inch piece of fusible fleeceto the wrong side, aligning the sides and one long edge,across the 3 pockets. Fold the pocket section, wrongsides facing. This forms a lining.

4. Using the all-purpose thread, stitch ¼ inch from theseam lines of the pockets to secure the layers together.Pin the pocket to the bottom front of the front of the out-er cover. Stitch along the ditch of the seam lines.

5. Place the fleeced cover and the lining together, rightsides facing, and stitch around the bottom edge, leaving a4-inch opening along the bottom back for turning.

6. Turn the covering right side out through the turningopening and hand stitch the opening closed.

DDS0501-026167M | LAST UPDATED: AUGUST 1, 2019 SEWING MACHINE COVER | SEWING 2 of 2