sgl salvo glad hand lock - castell safety · the salvo automatic door lock helps ensure loading...

Application

Description

Technical Data

Temperature Rating

Product Material

Dimensions

Weight

min -20° F / max 130° F

Brass and stainless steel

2.25” H x 10“ W x 2.25” D

4.5 lb

SGL Salvo Glad Hand Lock

The Salvo Glad Hand Lock can be attached to the emergency glad hand fitting of the truck trailer. Once attached, the trapped Castell key is released and can be inserted into the Salvo Manual Door Lock or Salvo Control Panel.

The Salvo Glad Hand Lock helps ensure loading dock safety. After the operator has unhooked the truck’s emergency brake, the Salvo Glad Hand Lock can be attached to the truck trailer, releasing the trapped Castell key. The truck is unable to depart until the key is replaced and the Salvo Glad Hand Lock is removed, allowing the brake lines to once again be engaged and operational.

110

mm

4.3”

166.5mm6.6”

18.4

mm

.7”

47 m

m1.

9”

58 m

m2.

3”

173.5 mm6.8”

255 mm10”

57 m

m2.

2”35

mm

1.4”

Order Information

While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.

Contact InformationCastell Interlocks, Inc.

21 Kenton Lands Road

Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075

www.castell.com 580.0012

1

Salvo Glad Hand Lock

P/N

510.0012

Description

The Salvo Club can be used in conjunction with other Salvo products to stop accidents before they happen. By attaching the Salvo Club to the vehicle’s steering wheel, it becomes locked in place and eliminates human error caused by unscheduled departure. The Salvo Club also prevents the vehicle against theft.

Application

Description

The Salvo Club helps ensure loading dock safety. The Salvo Club brings added safety to loading dock procedures by locking a vehicle’s steering wheel. The Salvo Club can be attached to vehicle steering wheels of varying sizes and will remain locked in place once the Castell key is removed. When loading/unloading procedures are complete, the Castell key may be replaced, and the Salvo Club can be removed allowing the vehicle driver to depart from the loading dock.

Technical Data

Product Material

Lock and Key Material

Min Steering Wheel Size

Max Steering Wheel Size

Steel/Cro-moly steel construction with heat treated solid steel hooks

Stainless steel ( FS - Lock )

9” Internal Diameter

19” Internal Diameter

CLUB Salvo Club

Order Information

Max Steering Wheel Diameter = 19” 482.6 mm

Min Steering Wheel Diameter = 9” 228.6 mm

Retracted Length = 22” 558.8 mm

Extended Length = 32” 812.8 mm




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

Salvo Club

P/N

510.0008

Description

The Salvo Control Panel is used as part of the Salvo Automatic Door system in conjunction with the SADL. It also easily connects to the Salvo Internal and External Traffic Lights or can be wired to an automatic door’s motor relay. Mounted on the outside of a building, the Salvo Control Panel traps the Castell key when an overhead door is open and the green communication light is displayed. When the overhead door is closed, the red communication light is displayed and the Castell key can be removed.

Application

Description

The SCP offers 1” diameter red and green communication lights designed to interlock with the door operator’s limit switches. The red communication light is displayed when the SADL is engaged. The green communication light is displayed when the SADL is disen-gaged, trapping the Castell key. When the SADL is reengaged, the red communication light is displayed and the yellow LED can then be pressed, which releases the Castell key.

Technical Data

Temperature Rating

Dimensions

Weight

Voltage

Color

Material

Rating

min -22° F / max 130° F

12” H x 8” W x 6” D

18 lb

110V AC

RAL 7035 (Light Grey)

Powder Coated Mild Steel

IP65, NEMA 4 Enclosure

SCP Salvo Control Panel

Order Information

200 mm7.875”

300

mm

11.7

5”

155 mm6.125”

160 mm6.25”

o 8 mm

o .375”

260

mm

10.2

5”




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

Salvo Control Panel

P/N

510.0033

Description

The Salvo Automatic Door Lock helps ensure loading dock safety. Mounted inside the building on the overhead door or Salvo Bollard, the Salvo Automatic Door Lock is linked to a Salvo Control Panel. When the door lock is disengaged the Castell key is trapped in the Salvo Control Panel. When the door lock is engaged, the key is released.

Application

Description

The Salvo Automatic Door Lock works in conjunction with the Salvo Control Panel to help ensure loading dock safety. The locking mechanism is a heavy duty stainless steel tongue.

Technical Data

SADL Salvo Automatic Door Lock

4 OFF M8x12mm HOLES(ACCESS FROM REAR)4 OFF O 5.5 HOLES(ACCESS FROM FRONT)

65 mm2.561”

7.5 mm

.2955”

115

mm

4.53

1”

M5 M8

7.5

mm

.295

5”

80 mm.152”

60 mm

6.74

”17

1.1

mm

130

mm

2.362”

5.11

8”

TAMPERPROOFSCREWS

2 OFF LEDSRIGHT - YELLOW (GUARD UNLOCKED)LEFT - RED (GUARD OPEN)

SOLENOIDOVERRIDE

FRONT BACK

1While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.

Terminal Blocks

SADL Salvo Automatic Door Lock

Material

Finishing

Color

Ingress Protection

Operating Force

Retention Force Locked

Maximum Approach Speed

Minimum Door Radius

Mechanical Life

Maximum Frequency of Ops

Ambient Temperature

Maximum Wire

Cross-Section to Fit Connector

Connector Type

Switch Conformance

Switching Contact Element

Switching Principal

Switch Control

Switching Voltage

Isolating Distance

Contact material

Utilization Category

Control Voltage

Insulating Resistance

Insulating Voltage

Solenoid Power Rating

Solenoid Rating (Duty Cycle)

Solenoid Voltage

Solenoid Voltage Tolerance

Zinc alloy, stainless steel

Gloss polyester powder coat on

passivated base material

Red, black, and stainless steel

IP67 (DIN400050)

0.5N

2,500 N

20 m/minutes

900 mm

>1,000,000 switching cycles

7,200 hour/hour

-5 ~ 40°C (mean over 24 hrs = +35°C)

2.50 mm²

Spring activated vibration proof block

DIN VDE 0660 Part 206 & IEC

Positive Break

3A

230V AC Max

2x2 mm per switch element

90% silver and 10% nickel

AC 15 or DC 13

24V AC/DC

20 M 0 hm

2.500V AC

12W (solenoid current at nominal

4NC and 2NO

500 mA; quasient current = 350mA)

100%

24V DC

90% to 110% of nominal

SADL Automatic Door Lock Specifications

Order Information

Terminals

Terminal 1

Terminal 2

Terminal 3

Terminal 4

Terminal 5

Terminal 6

Terminal 7

Terminal 12

Terminal 13

Terminal 14

ØV/N

Output 1

Solenoid power

Solenoid power

Output 2

+V/L

Output 2

Tongue Position Feedback

Solenoid Feedback

Output 1




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


2

Salvo Automatic Door Lock

P/N

510.0037

Description

4 OFF M8x12mm HOLES(ACCESS FROM REAR)4 OFF O 5.5 HOLES(ACCESS FROM FRONT)

65 mm2.561”

7.5 mm.2955”

115

mm

4.53

1”

M5 M8

7.5

mm

.295

5”

When the tongue is engaged, the safety key is trapped. The integral solenoid prevents the safety key from being removed until the solenoid is energized. On the SADL-A modules, a yellow LED will illuminate when the solenoid has been energized and the key can be removed. When the Safety Key is removed, a green LED will illuminate on the interlock indicating that there is a safe state. The forklift operator can then take the Safety Key into the trailer, preventing an inadvertent release of the trailer. The Safety Key cannot be replaced until the tongue is engaged in the interlock.

Operation

Description

Salvo SADL-A has a heavy duty tongue and head that allow it to withstand the rigors of a loading dock. The tongue and head unit can rotate in 90 degree increments. It has a key operated auxiliary release in the event of a power failure. The product is ideally designed for loading docks where an additional level of safety is preferred.

Safety Key Adaptor ensures that the forklift driver cannot be on a truck trailer and have the chain or door closed behind them.

SADL-A Salvo Automatic Door Lock with Key Adapter

Technical Data

80 mm.152”

60 mm

6.74

”17

1.1

mm

130

mm

2.362”

5.11

8”

TAMPERPROOFSCREWS

2 OFF LEDSRIGHT - YELLOW (GUARD UNLOCKED)LEFT - RED (GUARD OPEN)

SOLENOIDOVERRIDE

FRONTBACK


231.

1 m

m9.

098”

SADL-A Salvo Automatic Door Lock with Key Adapter

Material

Finishing

Color

Ingress Protection

Operating Force

Retention Force Locked

Maximum Approach Speed

Minimum Door Radius

Mechanical Life

Maximum Frequency of Ops

Ambient Temperature

Maximum Wire

Cross-Section to Fit Connector

Connector Type

Switch Conformance

Switching Contact Element

Switching Principal

Switch Control

Switching Voltage

Isolating Distance

Contact material

Utilization Category

Control Voltage

Insulating Resistance

Insulating Voltage

Solenoid Power Rating

Solenoid Rating (Duty Cycle)

Solenoid Voltage

Solenoid Voltage Tolerance

Zinc alloy, stainless steel

Gloss polyester powder coat onpassivated base material

Red, black, and stainless steel

IP67 (DIN400050)

0.5N

2,500 N

20 m/minutes

900 mm

>1,000,000 switching cycles

7,200 hour/hour

-5 ~ 40°C (mean over 24 hrs = +35°C)

2.50 mm²

Spring activated vibration proof block

DIN VDE 0660 Part 206 & IEC

Positive Break

3A

230V AC Max

2x2 mm per switch element

90% silver and 10% nickel

AC 15 or DC 13

24V AC/DC

20 M 0 hm

2.500V AC

12W (solenoid current at nominal

4NC and 2NO

500 mA; quasient current = 350mA)

100%

24V DC

90% to 110% of nominal

SADL-A Automatic Door Lock Specifications

Terminals

Terminal 1

Terminal 2

Terminal 3

Terminal 4

Terminal 5

Terminal 6

Terminal 7

Terminal 12

Terminal 13

Terminal 14

ØV/N

Output 1

Solenoid power

Solenoid power

Output 2

+V/L

Output 2

Tongue Position Feedback

Solenoid Feedback

Output 1

Order Information




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


2

Salvo Automatic Door Lock with Adaptor

P/N

510.0037

Description

Terminal Blocks

The Salvo Manual Door Lock helps ensure loading dock safety. Mounted on an overhead door or Salvo Bollard inside the building, the Salvo Manual Door Lock can work in conjunction with the Salvo Barrier Chain to prevent unscheduled departures. When the Castell key is inserted into the Salvo Manual Door Lock, the bolt can be removed and the door opened. When the door is closed, the bolt is replaced and the key is released.

Application

Description

The standard bolt of the Salvo Manual Door Lock is stainless steel and is mounted on the left-hand side of the door. For increased flexibility, the Salvo Manual Door Lock can be equipped with a chain-mounted bolt in order to be used with a Salvo Barrier Chain.

Technical Data

Temperature Rating

Product Material

Lock Dimensions

Bolt Dimensions

Weight

min -40° F / max 280° F

Stainless steel

2.75” H x 3.5” W x 2.5” D

13” long, 5” wide

2.42 lb

SMDL-SDMC Salvo Door Manual Chain

Order Information




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

SMDL - R Salvo Manual Door Lock Right Hand with Chain

SMDL - L Salvo Manual Door Lock Left Hand with Chain

P/N

510.0042

510.0034

Description

The Salvo Manual Door Lock helps ensure loading dock safety. Mounted on an overhead door or Salvo Bollard inside the building, the Salvo Manual Door Lock can work in conjunction with the Salvo Barrier Chain to prevent unscheduled departures. When the Castell key is inserted into the Salvo Manual Door Lock, the bolt can be removed and the door opened. When the door is closed, the bolt is replaced and the key is released.

Application

Description

The standard bolt of the Salvo Door Manual Bolt is stainless steel and is mounted on the left-hand side of the door.

Technical Data

Temperature Rating

Product Material

Lock Dimensions

Bolt Dimensions

Weight

min -40° F / max 280° F

Stainless steel

2.75” H x 3.5” W x 2.5” D


2.42 lb

SMDL-SDMB Salvo Door Manual Bolt

Order Information

Salvo Manual Door Lock with Bolt




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


P/N

510.0041

Description

1

The Salvo Manual Door Lock with Electric Interlock helps ensure loading dock safety. Mounted on an overhead door or Salvo Bollard inside the building, the SMDL-EI can be electrically interlocked with another piece of dock equipment.

Application

Description

The standard bolt of the Salvo Manual Door Lock with Electric Interlock is stainless steel and is mounted on the left-hand side of the door. For increased flexibiltiy, the SMDL-EI can be equipped with a chain-mounted bolt in order to be used with a Salvo Barrier Chain.

Technical Data

Temperature Rating

Product Material

Lock Dimensions

Bolt Dimensions

Weight

Current/Voltage

Mechanical Life Cycle

Switch Contact

min -20° F / max 175° F

Aluminum and stainless steel

2.75” H x 3.5” W x 2.5” D


2.5 lb

10A / max 500V

200,000 electrical operations

SMDL-EI SMDL - Electric Interlock

2 x N.O. (Normally Open)1 x N.C. (Normally Closed)

Order Information

SMDL - Electric Interlock Right / Hand-2

SMDL - Electric Interlock Left / Hand-1

P/N

510.0044

510.0036

Description




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

SMDL - EI - RP/N 510.0036

www.castell.com1.877.341.3075

Application

Description

The Salvo Adjustable Manual Lock Bracket (SAMLB) helps ensure loading dock safety by working in conjuction with other Salvo products. The SAMLB is easy to install by bolting it to the wall. Its adjustable feature makes it simple to align at the loading dock. Various products mount to the SAMLB to stop accidents before they happen.

SAMLB Salvo Adjustable Manual Lock Bracket

SBCSalvo Barrier Chain Kit

SMDL-EISalvo Manual Door with Electrical Interlock

SMDLSalvo Manual Door Lock

Order Information




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

Salvo Adjustable Manual Lock Bracket

P/N

510.0018

Description

Technical Data

Product Material

Color

Dimensions

Weight

Mild Steel

OSHA Safety Yellow

8.386” H x 3.15” W x 3.5” - 5” D (adjustable)

4.5 lb

213.

00 m

m8.

386”

3.5”88.9 m

m5”127 mm

(adjustable)

-

9.00 mm.354”

80.00 mm3.15”

40.00 mm1.575”

9.00 mm.354”

28.50 mm1.122”

195.

25 m

m7.

687”

69.5

0 m

m2.

736”

21.0

0 m

m.8

27”

74.0

0 m

m2.

913”

21.0

0 m

m.8

27”

6.60 HOLES USED FORMOUNTING SMDL-EI,SMDL ANDCHAIN PLATES

R4.50 mm TYP.

.177”

MOUNTING DETAILS

BOLLARD

Applications

Description

The Salvo Bollard has many applications that help ensure loading dock safety. The Salvo Bollard can be equipped with several different Salvo products to stop accidents before they happen. It can be mounted on exisiting or newly poured concrete by attaching the post to a mounting bracket on the ground.

SMDLSalvo Bollard with Manual Door

Lock

Manual door lock mounts to bollard

and works in conjunction with Salvo

Bollard with Chain.

SBCSalvo Bollard with Barrier Chain

Bracket and chain can be mounted

to bollard and connect to bollard-

mounted manual or automatic door

lock (as shown above).

SGLESalvo Bollard with Storage Box

Designed to store Salvo Glad Hand

Lock (SGL) when not in use on a

truck trailer.

SMDL model shown

Salvo Bollard

SADLSalvo Bollard with Automatic Door

Lock

Automatic door lock mounts to

bollard and works in conjunction with

Salvo Bollard with Chain and

connects to the Salvo Automatic Door

Lock (SADL).

SMDL - EISalvo Bollard with SMDL - EI Lock

SMDL - EI manual lock with electrical

contacts mounts to bollard and

interlocks with a dock leveler or

controls Salvo Internal Traffic Lights

(SITL).


BOLLARD

Technical Data

Post Material

Cap Material

Dimensions

Weight

Color

Powder-coated carbon steel

UV-resistant ABS plastic (black)

40.5” x 4.25” x 6.25”

35 lb

Safety Yellow

L-anchor, expansion anchor, split washer and nut, SADL mounting plate, SMDL/Chain Plate mount (included)

SCP & SGLESalvo Bollard with Control Panel and

Storage Box

Control panel (SCP) mounts on top of

the bollard in conjunction with

Storage Box (SGLE) mounted to the

side.

Salvo Bollard

Applications (Cont’d)

Mounting Hardware

SCPSalvo Bollard with Control Panel

Designed to mount Salvo Control

Panel (SCP), which interlocks with the

door operator’s limit controls or

controls the Salvo Internal Traffic

Lights (SITL).

152.4 mm

1022

.35

mm

40.2

5”

6”

114.3 mm

4.5”

Order Information




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


2

Salvo Bollard

P/N

510.0000

Description

12”

The Salvo Wall Bracket has pre-positioned holes making it easy to hold any of the mountable Salvo products. The Salvo Wall Bracket is ideally mounted between dock doors to create space for the easy operation of Salvo products.

Application

Description

The Salvo Wall Bracket attaches to the wall and makes it easy to mount various Salvo products as part of a loading dock safety system.

Technical Data

Product Material

Color

Dimensions

Weight

Carbon steel

OSHA Safety Yellow

10.25” H x 12” W x 4.5” D

9 lb

SWB Salvo Wall Bracket

SADL SMDL w/ ChainSCCP

Order Information

65.024 mm

39.88 mm

18.7

96 m

m

24.64 mm

37.34 mm

39.6

24 m

m73

.914

mm

17.53 mm79.502 mm

115.

062

mm

152.

4 m

m

3”

4 x .56” THRU

Scale 2:1

Bot

tom

12”

.75”

4.5”

6”3”

Bot

tom

Top

10”

.19”

.19”

6” Top

1.55

”2.

91”

2 X

O 1

” TH

RU

.69”3.13”

6” 4.53

”.7

4”

2.56”

1.57” 1.47”

4 X

O .3

1” T

HR

U4

X O

.41”

TH

RU

304.

8 m

m

19.05 mm

114.3 mm

76.2

mm

76.2 mm

152.

4 m

m

14.22 mm

152.

4 m

m

254 mm

4.83 mm

4.83 mm

304.

8 m

m

25.4

mm

2.44

mm

10.4

1 m

m

.97”




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

Salvo Wall Bracket

P/N

510.0001

Description

Part of the Salvo product line, the Salvo Barrier Chain can be used when door-mounted locks are not suitable. Used in conjunction with several Salvo products, the Salvo Barrier Chain is put in place to prevent a forklift driver from leaving the dock when there is no truck at the dock. The Salvo Barrier Chain is ideal for applications where dock doors are left open.

Application

Description

The Salvo Barrier Chain can be used in conjunction with a Salvo Automatic or Manual Door Lock to help ensure loading dock safety. The SBC consists of three components: the barrier chain plate, the chain link, and the barrier chain. The barrier chain can be cut to length and quickly attached to the barrier chain plate without welding using the one-time close chain link. The Salvo Barrier Chain can be floor-mounted, wall-mounted, or mounted on a Salvo Bollard.

Technical Data

Type of Mounting

Plate Material

Chain Material

Chain Link

Four M6 security bolts

Stainless Steel

Steel, Powder Coated in OSHA Safety Yellow

Steel, One time closure

SBC Salvo Barrier Chain

9 mm

7 m

m

9 mm 4 mm

92 m

m3.

620”

57.912 mm2.280”

6.75mm

Order Information

2.01 mm

25.654 mm

29.97 mm

4.98 mm

29.9

7 m

m

1.575”.353”

.354”4 x o .266 THRU ALL

2.91

3”

1.180”.079”

o .196”

1.010”SECTION A-A

1.18

0”




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

Salvo Barrier Chain

P/N

510.0006

Description

The Salvo Traffic Lights can be used in conjunction with the Salvo Traffic Light Sign to improve communication between a dock attendant and truck drivers. Mounted outside in close proximity to the Salvo Traffic Light Sign, the Salvo Traffic Lights are linked to a Salvo Control Panel. The red light indicates that the truck is still being loaded, and the green light inform the driver when it is safe to depart from the loading dock.

Application

Description

The Salvo Traffic Lights are used where larger red and green lights than those on the Salvo Control Panel are required to warn drivers not to pull away until the green light is on. The lights are ideally located in a highly visible location close to the Salvo Traffic Light Sign.

Technical Data

Product Material

Dimensions

Len Diameter

Weight

Voltage

Color

Polypropylene

5” H x 6 3/8” W x 4” D

10 1/4”

2 lb

115V AC

OSHA Safety Yellow

STL Salvo Traffic Lights

Wire Configuration

Black (Green)

White

Black (Red)

Red

Green Lamp

Ground/Earth

Red Lamp

Common/Neutral

Order Information

RED

GREEN

BLACK

BLACK

RED

WHITE

STL Unit

163 mm6.422”

143 mm5.634”

267

mm

10.5

2”

291

mm

11.4

7”

O 6 mm

.25”




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

Salvo Traffic Lights

P/N

510.0031

Description

The Salvo Traffic Light Sign can be used in conjunction with the Salvo External Traffic Light to improve communication and help ensure loading dock safety. Mounted outside in close proximity to the Salvo External Traffic Light, the Salvo Traffic Light Sign informs the driver when it is safe to depart from the loading dock.

Application

Description

The Salvo Traffic Light Sign warns drivers not to pull away until the the green light is on. The sign is ideally located in a highly visible location close to the Salve External Traffic Light. The Salvo Traffic Light Sign contains reflected lettering that makes it easy to read from a truck’s rear view mirrors.

Technical Data

Product Material

Dimensions

Weight

Color

Laminated

10” W x 2’ 4” H x 1/4” D

2 lb

OSHA Safety Yellow

STLS Salvo Traffic Light Sign

Order Information

6 mm

710

mm

2’ 4

”

6 FIXING HOLES O 5.51/4”

96 m

m3.

75”

294.

50 m

m11

.625

”

204 mm8.063”

25 mm1”

294.

50 m

m11

.625

”

254 mm10”

254 mm10”10”10

O 5.5

96 m

m3

75”

294.

50 m

m11

625”

204 mm8.063”

mm1”

294.

50 m

m11

625”

.25”




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


1

Salvo Traffic Light Sign

P/N

510.0032

Description

Part of the Salvo product line, the Salvo Glad Hand Lock Enclosure - Exterior stores a Salvo Glad Hand Lock. Mounted to the wall or a Salvo Bollard outside, the Salvo Glad Hand Lock Enclosure stores and protects a Salvo Glad Hand Lock when it is not being used on a truck’s airline.

Application

Description

The Salvo Glad Hand Lock Enclosure - Exterior is designed to store a single Salvo Glad Hand Lock when not in use. The Salvo Glad Hand Lock Enclosure can be quickly wall-mounted or attached to a Salvo Bollard. The enclosure is weather-resistant, protecting the Salvo Glad hand Lock even in a harsh environment.

Technical Data

Temperature Rating

Product Material

Dimensions

Weight

Closing Handle

min -20° F / max 175° F

Stainless Steel

12” H x 8” W x 6” D

6 lb

Handle with Key Lock

SGLE-E SGL Enclosure - Exterior

Mounting HolePattern

Order Information

200 mm

7.88”

161 mm

6.34”

131 mm5.16”

299.

97 m

m11

.81”

160.15 mm6.31”

40.01 mm1.58”

73.9

9 m

m2.

91”

259.

97 m

m10

.24”

7 mm

1/4”o

SGL Enclosure - Exterior




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


P/N

510.0004

Description

1

Part of the Salvo product line, the Salvo Glad Hand Lock Enclosure - Interior stores up to six Salvo Glad Hand Locks. Mounted to the wall inside, the Salvo Glad Hand Lock Enclosure stores Salvo Glad Hand Locks when they are not being used on a truck’s airlines.

Application

Description

The Salvo Glad Hand Lock Enclosure - Interior is deigned to store six Salvo Glad Hand Locks when not in use. The Salvo Glad Hand Lock Enclosure is wall-mounted. The enclosure is modular and can be combined with other enclosures to store more than six Salvo Glad Hand Locks.

Technical Data

Product Material

Color

Dimensions

Weight

Cold rolled steel

Powder Coat OSHA Safety Yellow

12” H x 20” W x 1” D

7 lb

SGLE-I SGL Enclosure - Interior

25.4 mm

30.23 mm

304.8 mm

19.05 mm 266.7 mm

501.

65 m

m

469.

9 m

m

16.002 mm 9.652 mmOrder Information

304.8 mm

19.05 mm 266.7 mm

501.

65 m

m

469.

9 m

m

.002 mm 9.652 mm

12.00”

10.50”.75”18

.50”

19.7

5”

.63” 4x o .38” THRU

1”

1.19” TYP.

SGL Enclosure - Interior




Erlanger, KY 41018

phone: +1.859.341.3075

fax: +1.859.957.1577

toll free: +1.877.341.3075


P/N

510.0005

Description

1

sgl salvo glad hand lock - castell safety · the salvo automatic door lock helps ensure loading...

Documents