shaik jeelani, ph.d., p.e. - tuskegee university...co-pi with dr. mahesh hosur 57. “a partnership...
TRANSCRIPT
1
Shaik Jeelani, Ph.D., P.E. Vice President, Research and Sponsored Programs
Dean of the Graduate School
Interium Department Head of Materials Science and Engineering
TUSKEGEE UNIVERSITY Ph.: (334) 727-8970
Fax: (334)-724-4224 [email protected]
Education
• Ph. D 1974, North Carolina State University, Raleigh, North Carolina
• Major: Machine Design, Stress Analysis, Metal Machining
• Minor: Mathematics, Engineering Mechanics
Experience (Academic)
• Professor of Mechanical Engineering, Tuskegee University, 1980 – Present
• Associate Professor of Mechanical Engineering, Tuskegee University, 1978 –1980
• Assistant Professor of Mechanical Engineering, Tuskegee University, 1974 –1978
Experience (Administrative/Managerial)
• Vice President, Research and Sponsored Programs, Tuskegee University, 1996-Present
• Dean, Graduate School, 2015 – Present
• Founding Head, Department of Materials Science and Engineering, 1998-2015
Director, Ph.D. Program in Materials Science and Engineering, 1998-2012
• Director, Center for Advanced Materials, Tuskegee University, 1977 - Present
• Interim Dean, School of Engineering and Architecture, Tuskegee University, 1992-
1994
• Director, Computer Aided Design Laboratory (CAD), Tuskegee University, 1984-1996
• Associate Dean of Engineering and Architecture, Tuskegee University, 1981 – 1996
• Assistant Dean, of Engineering and Architecture, Tuskegee University, 1980 – 1981
• Interim Head, Mechanical Engineering Department, Tuskegee University, June 1, 1987
- August 31, 1987, June 1, 1982 – July 30, 1983, April 1, 1979 – June 1, 1980, June 1,
• 1977 – May 31, 1978
Curriculum and Infrastructure Development
Dr. Jeelani played a leading role in the development of various curriculums and infrastructure
in the School of Engineering and Architecture. He spearheaded the Infrastructure and
curriculum development in the School of Engineering and Architecture through a $2.50
million grant from the Army Research Office. This effort resulted in the university’s
obtaining full (six years) ABET accreditation for all its Engineering programs. He also
wrote the proposal for funding of the first Endowed Chair in Materials Science and
Engineering at Tuskegee University and spearheaded the development of the curriculum,
recruitment of students and establishment of Tuskegee University’s first Ph.D. program
in Materials Science and Engineering.
Division of Research and Sponsored Programs
2
Dr. Jeelani is serving as the first Vice President for Research and Sponsored Programs
(1996-Present) at Tuskegee University. The responsibilities include developing aggressive
strategies and plans to increase funding for research and other sponsored programs and
supervising three departments: Sponsored Programs, International Programs and
Grantsmanship and Compliance. As a result of streamlining the Grants and Contracts process
through development of various Sponsored Programs and Compliance Guides and
publication of Tuskegee’s Research Capability, Funding for Research and Sponsored
Programs at Tuskegee was raised from $23.6 million in 1996 to $48 Million in 2004.
Teaching Experience
Engineering Graphics, Introduction to Engineering, Statics, Dynamics, Applied Mechanics,
Materials Science, Strength and Materials, Thermodynamics, Fluid Mechanics, Theory of
Machines, Manufacturing Processes, Machine Design, Advanced Machine Design, Stress
Consideration in Design, Experimental Stress Analysis.
Research Interests
Processing (hand layup, vacuum bag, autoclave, compression molding), Process Sensing,
low-cost manufacturing using RTM, VARIM processes, static and dynamic (low-
velocity, high strain rate, ballistic impact) of Fiber Reinforced Composites, Sandwich
Composites, Fatigue and Fracture, Microstructural characterization (SEM, Optical
Microscopy, Thermo-gravimetric Analysis), Structural Analysis, Non Destructive
Evaluation.
Funded Grants
1. “Surface Integrity in Machining 18% Nickel Maraging Steel”, Grant No SER77-04201
from National Science Foundation ($20,000, 6/1/77 - 12/31/78).
2. “Evaporation Behavior of Super Alloy”, NASA, Lewis Research Center, ($40,000
8/1/78 – 8/31/78), with Dr. R.P. Ramirez.
3. “A study of Cumulative Fatigue Damage”, U.S. Navy, Naval Air Systems Command,
($30,000 11/28/77-9/2/78) with Dr. B.Z. Jarkowski.
4. “Evaporation Behavior of Super Alloys”, NASA, Lewis Research Center, ($25,000
6/1/78-12/31/79), with Dr. R.P. Ramirez.
5. “A Study of Cumulative Fatigue Damage”, U.S. Navy Air Systems Command
($41,175, 2/1/79-4/30/80).
6. “A Study of Cumulative Fatigue Damage”, U.S. Navy Air Systems Command
($61,891, 5/15/80-8/14/81).
7. “Support for Pre-College and Scholarship Programs in the School of Engineering and
Architecture”, DoD, DoE, NASA and Industry, ($3.2 million, 1981-1996).
8. “Investigation of Cumulative Fatigue Damage for Selected Materials”, U.S. Navy,
Navel Air Systems Command, ($42,635 5/15/82-8/31/83).
9. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, With Dr.
R. Natarajan, NASA-Marshall Space Flight Center, $108,544, 8/15/83-812/84).
10. “Characterization of Polymer Adhesives for Composites”, with Drs. Dillon and
Ludwick, NASA - Lewis Research Center, ($99,593, 2/1/884-1/31/85).
3
11. “Effect of Cutting Speed and Tool Rake angle on the Fatigue Life of AISI 4130 Steel”,
NASA-Marshall Space Flight Center, ($15,000, 6/1/84-5/31/85).
12. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, NASA-
Marshall Space Flight Center, ($122,871, 12/15/84-12/31/86).
13. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”,
NASA-Marshall Space Flight Center, ($18,000, 6/1/85-5/31/86).
14. “Characterization of Fiber Composites”, NASA-Marshall Space Flight Center,
($18,000, 9/23/85-9/22/86).
15. “Characterization of Polymer Adhesives for Composites”, with Dr. Ludwick, NASA-
Langley Research Center ($121,891, 4/1/85-12/31/86).
16. “Measurement of Residual Stress Distribution in Machining AISI 4130 Steel”,
NASA- Marshall Space Flight Center, ( $20,000 9/23/85-9/22/86)
17. “Manufacture and Characterization of Silicon Carbide/Silicon Carbide Composites”,
U. S. Navy, Office of Naval Research, URI program, ($2.25 Million, 1986-1991).
18. “Aviation Pavement Study for FAA”, Pailen-Johnson Associates, ($13,251, 2/1/-
9/31/1986).
19. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”,
NASA-Marshall Space Flight Center, ( $18,000, 6/1/86-5/31/87).
20. “Effect of Grinding on the Fatigue Life of Ti 6A1-4V Alloy”, NASA-Marshall Space
Flight Center, ($124,871, 12/4/86-12/3/87).
21. “Characterization of Fiber Composites”, NASA-Marshall Space Flight Center, ($
20,000, 9/18/86-8/19/87).
22. “Structure and Properties of FM73 and Related Epoxy Adhesives”, NASA- Langley
Research Center, with Dr. Al Ludwick ($123,385, 3/23/87-2/22/88).
23. “Environmental Effects on the Mechanical Properties of Composite Materials”,
NASA-Marshall Space Flight Center, ($18,000, 6/1/87-530/88).
24. Determination of Residual Stress Distribution in Machining 2024-T351 Aluminum
Alloy”, NASA-Marshall Space Flight Center, ($20,000, 6/1/87-5/31/88).
25. “An Evaluation of the Interfacial Bond Properties between Carbon Phenolic and Glass
Phenolic Composite Materials” NASA-Marshall Space Flight Center, ($18,000,
6/1988-5/1988).
26. “Manufacture and Characterization of SiC/SiC Composites, U.S. Navy, Office of Naval
Research, with Drs. Ludwick, Adeyemi and Yang ($2.25 million, 9/86- 9/91).
27. "Development of Capability for Characterization of Ceramic/Ceramic Composites”,
U.S. Air Force, Office of Scientific Research, ($250,000, 1/89- 12/90).
28. “An Investigation of the Effects of Environment and Combined Compression- Shear
on the Response of Carbon/PEEK Thermoplastic Composites”, NASA- Marshall Space
Flight Center, ($256,000, 9/1/98-9/8/1992).
29. “Fractographic Analysis of Advanced Organic Matrix Composites”, U. S. Navy,
Naval Air Development Center, ( $25,000, 10/30/89-/1992)
30. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, NASA-
Marshall Space Flight Center, ($120,000, 5/1990-4/30/91).
31. Mechanical Property Testing of Resin Transfer Molded Composites”, McDonnel
Douglas Corp. ($15,000, 10/92-12/92), Co-PI with Dr. Hassan Mahfuz.
32. “Fatigue Damage in Composite Materials”, United States Army, Strategic Defense
Command, ($200,000, 8/90-8/93).
33. “Micro-structural Study of the Thermo-mechanically Fatigued Titanium Aluminide”,
4
U. S. Navy, Naval Warfare Center (NAWC), ($10,000, 9/92-3/93).
34. “Mechanical Property Characterization of Refractory Composites”, National
Aerospace Plane (NASP) Joint Program Office”, ($810,352, 9/90-9/95).
35. “High Temperature Fatigue of SiCf/Si3N4”, National Science Foundation, ($310,000,
9/92-9/95).
36. “Effects of Stress Ratio on Fatigue Damage in Composite Materials”, U. S. Army,
Strategic Defense Command, ($200,000, 8/90-8/93).
37. “Reverse Fatigue of RTM Composites” 3M Corporation ($45,000, 4/92-4/95). Co-PI
with Dr. Hassan Mahfuz.
38. “Infrastructure Support For Engineering at Tuskegee University”, Department of
Defense, Army Research Office, ( $ 2.25 million, 1993-1998)
39. “Instrumentation of Fatigue and Compression Characterization Advanced Composites”,
U. S. Navy, Office of Naval Research (ONR), ($350,000, 10/93-10/95).
40. “Advanced Polymeric Composites Manufacturing”, Martin Merietta Laboratories,
($20,000, 2/1/94-2/1/95), Co-PI with Dr. Hassan Mahfuz.
41. “Intelligent Processing of Resin Transfer Molded Composites”, Defense Advanced
Research Project Agency (DARPA), ($726,100, 2/95-2/96).
42. “Advanced Polymeric Composites Manufacturing and Damage Tolerance Studies”,
Lockheed Martin Manned Space Systems, New Orleans, LA ($110,000, 2/94-12-98),
Co-PI with Dr. Hassan Mahfuz.
43. “Intelligent Resin Transfer Molding for Integral Armor Applications”, Army
Research Office (ARO), ($9,400,000, 9/95-9/2000).
44. “Advanced Composites for Sea Structures”, Office of Naval Research, ($380,000, 9/95-
10/98).
45. Smart Materials for Transport Control”, National Science Foundation, Alabama
EPSCoR, ($300,000, 9/95-9/98).
46. “Development and Analysis of Composite Isogrid Structures”, NASA- Marshall Space
Flight Center, ($100,000, 5/95-5/97) Co-PI with Dr. Hassan Mahfuz.
47. "Advanced Integrated Structural Optimization," McDonnell Douglas Aerospace, St.
Louis, Missouri, ($50, 000, 1/95-12/95), Co-PI with Dr. Hassan Mahfuz.
48. "Damage Tolerance of RTM Composite Sandwich Constructions,” Wright
Laboratory (WL), Wright Patterson Air Force Base, ($300,000, 9/95-9/98), Co-Pi
with Dr. Uday Vaidya.
49. "Innovative Manufacturing of High Performance Materials," National Science
Foundation, Center for Research Excellence in Science and Technology (CREST),
($4.5 million, 9/97-9/02).
50. "Instrumentation for the Investigation of Structural Integrity of Sandwich
Structures," U. S. Navy, Office of Naval Research (ONR), ($92,000, 6/00 -
12/00)
51. “Resin Infusion of Advanced Aerospace Composites”, Boeing Company, ($250,000,
9/96-9/01), Co-PI with Dr. Hassan Mahfuz.
52. “Alabama EPSCoR Infrastructure Development”, National Science Foundation,
Alabama EPSCoR, ($150,000, 1998-2001).
53. “Innovative Manufacturing of Advanced Composites for Automotive Applications”,
General Motors Corporation, ($200,000, 3/98-3/02).
54. Sandwich Construction for Sea Structures” U. S. Navy, Office of Naval Research,
($590,000, 1/99-1/01), Co-PI with Dr. Hassan Mahfuz.
5
55. Survivability of Affordable Aircraft Composite Structures, Air Force Laboratory,
Wright Patterson Air Force Base, ($ 450,000, 1999-2003), Co-PI with Dr. Mahesh
Hosur.
56. “Dynamic Characterization of Graphite/Epoxy Composite Laminates under Inplane
compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated
Temperatures”, U.S. Army, Cold Regions Research Laboratory, ($175,000, 2001-2003)
Co-PI with Dr. Mahesh Hosur
57. “A Partnership for Innovations in Nano Composites Technology,” National Science
Foundation, ($600,000, 2/1/01 - 1/31/03) Co-PI with Dr. Hassan Mahfuz.
58. “Innovative Materials and Processes for Next Generation Weapons Systems, U.S.
Army Research Office, ($900,000, 2001-2004), Co-PI with Dr. Derrick Dean.
59. “Nanophased Composites for Marine Structures”, U. S. Navy, Office of Naval
Research, ($994,000, 2/02-7/04), Co-PI with Dr. Hassan Mahfuz.
60. “Alabama Internet II Middleware Initiative”, National Science Foundation, Alabama
EPSCoR, ($275,010, 2/1/01-1/31/04).
61. “Acquisition of High Speed Imaging System for Dynamic Characterization of
Advanced Materials”, U. S. Navy, Office of Naval Research, ($200,000. 9/1/01-
8/31/02).
62. “Support for the Ph.D. Program in Materials Science and Engineering at Tuskegee
University”, David and Lucile Packard Foundation, ($ 244,000, 2001-2002).
63. “Synthesis, Manufacturing and Characterization of Structural Nanocomposites”
Center for Research Excellence in Science and Technology (CREST) Program,
National Science Foundation, ($4.5million, 9/1/03-8/31/08).
64. “Integrative Graduate Education and Research Training in Nanomaterials Science and
Engineering”, Integrative Graduate Education and Research Training (IGERT)
Program, National Science Foundation, ($3.32 million, 10/01/03-9/30/08).
65. “Studies of Structural Nanocomposites using Transmission Electron Microscopy”,
Research Infrastructure in Science and Engineering (RISE) Program, National Science
Foundation, ($1.0 million, 02/10/04-01/31/06).
66. “Center of Excellence for Composites and Advanced Materials” Air Transportation
Center of Excellence for Advanced Materials, Federal Aviation Administration,
($225,000, 06/01/04-05/30/07).
67. “Development of Flexible Extremities utilizing Shear Thickening Fluid/fabric
Composites”, Center of Excellence for Battlefield Capability Enhancement (BCE),
Army Research Office, ($2.23 million, 11/01/04-09/30/09).
68. “Alabama Center for Nanocomposite Materials” Alabama Experimental Program for
Stimulating Competitive Research (EPSCoR), National Science Foundation, ($1.8
million, 2005-2008), Co-PI with Dr. Mahesh Hosur.
69. “Effects of Surface Modifications on the Interfacial Properties of Structural
Nanocomposites,” National Science Foundation (06/01/05-05/31/06), $100,000 Co-
PI with Dr. Mahesh Hosur.
70. “Characterization of Nanocomposites and Composite Laminates,” Clarkson
Aerospace Inc., (8/1/2005-1/31/2010), $225,000.
71. “MRI: Acquisition of Ultrasonic C-Scan System for Research and Educational
Training in Structural Nanocomposites,” National Science Foundation (09/01/05-
08/31/08), $260,368 Co-PI with Dr. Mahesh V. Hosur.
6
72. PREM: A Research and Educational Partnership in Nanomaterials between Tuskegee
University and Cornell University, (9/01/2006-08/31/2012), $2,550,000.
73. Enhancement of Research Infrastructure in the Materials Science and Engineering
Program at Tuskegee University, National Science Foundation, (10/1/2006-
9/30/2008), $1,000,000.
74. “MRI: Acquisition of a Material Testing System for Research and Educational
Training in Static and Dynamic Characterization of Advanced Structural
Nanocomposites,” National Science Foundation (09/01/07-08/31/10), $394,550 Co-
PI with Dr. Mahesh V. Hosur.
75. “Investigations on the Mechanical, Multifunctional and Environmental Behavior of
Fiber Reinforced Polymer Nanocomposites for Marine Applications,” Office of Naval
Research (7/7/08-05/31/12), $500,000 Co-PI with Dr. Mahesh V. Hosur.
76. “Alabama Center for Nanocomposite Materials,” NSF-EPSCoR (09/01/2008-
08/31/2010), $1,250,000 Co-PI with Dr. Mahesh Hosur.
77. “HBCU-RISE: Strengthening the Ph.D. Program in Materials Science and
Engineering at Tuskegee University,” National Science Foundation, (1/1/2009-
12/31/2011), $1,000,000.
78. “Roadside Explosive Hazard Indicator and Deterrent System (REHIDS),” Concurrent
Technologies Corporation, (4/10/10-9/30/10). $56,000, Co-PI with Dr. Mahesh V.
Hosur.
79. “HBCU-RISE: Enhancement of Research and Educational Infrastructure in
Nanobiomaterials Science and Engineering at Tuskegee University,” National
Science Foundation, $1.0M, (04/01/2015-03/31/2018) Co-PI with Dr. Vijaya Rangari
80. “The NanoBio Science Partnership for Alabama Black Belt Region,” National
Science Foundation, (09/01/2011-08/31/2019), $10 M.
81. “Implementation Project: Preparing Interdisciplinary Minority Material Scientists and
Engineers of the Future,” National Science Foundation, $1,779,388, (7/1/2017-
6/30/2022).
82. “Targeted Infusion Project: Integrative Makers Course and Laboratory for STEM
Undergraduates,” National Scienc Foundation, $300,000, (07/01/18-06/30/2021), Co-
PI with Dr. Shaik Zainuddin.
83. REU SITE: Tuskegee University Research Experience for Undergraduates in Nano-
Bio Materials Science and Engineering, $377,994.00, (04/05/2017-03/31/2021),
(Shaik Zainuddin (PI), Mahesh Hosur (Co-PI)), National Science Foundation. Co-PI
with Dr. Shaik Zainuddin.
84. MRI: Acquisition of a Nanoindentation Equipment for Research and Education
Training in Nanomechanical Characterization of NanoBio Materials,” National
Science Foundation, $400,455, (09/01/2017-08/30/2020), Co-PI with Dr. Shaik
Zainuddin.
Patents Granted:
(1) Filtration system and methods of using such system for improved water filtration,
Vijaya Rangari, Vitus Apalangya, Bonifce Tiimob, Temesgen Samuel: Submittee,
pending, US 10,583,417.
7
Book Chapters
1. Shaik Zainuddin, Mahesh Hosur, Ashok Kumar and Shaik Jeelani, “Effects of ultraviolet
radiation and condensation on static and dynamic compressive behavior of nanophased
glass/ epoxy composites,” book chapter in Fiber Reinforced Polymer (FRP) Composites
for Infrastructure Applications, Editors: Ravi Jain, Luke Lee, Publisher: Springer, 2012,
pp. 91-111.
2. S. Zainuddin, M. V. Hosur, Ashok Kumar, Jonathan Trovillion, S. Jeelani, “Durability
Enhancement of Fiber Reinforced Composites Using Nanoclay,” book chapter in
Advanced fibre-reinforced polymer (FRP) composites for structural applications, Edited
by J Bai, University of Glamorgan, UK, ISBN-13: 978 0 85709 418 6, September 2013.
3. Mahesh Hosur, Farhan Chowdhury and Shaik Jeelani, “Effects of Fabrication Processes
and Nanoclay Inclusion on Performance of Woven Carbon/Epoxy Composite
Laminates,” Chapter 6 in Computational and Experimental Methods in Structures- Vol.
6: Woven Composites, Editor: Ferri M. H. Aliabadi, Imperial College Press, ISBN 978-
1-78326-617-3, 2015, pp. 179-214.
4. Shaik Zainuddin, M. V. Hosur, A. A. Mohammed, E. M. Smith and S. Jeelani,
“Thermoset Resin Sandwich Structures,” in Lightweight Composite Structures for
Transport: Design, Manufacturing, Analysis and Performance, Ed: James Njuguna,
Woodhead Publishing Series in Composites Science and Engineering, 2016, ISBN: 978-
1-78242-325-6, pp. 165-187.
5. Harish M. Rao, Mahesh Hosur, Shaik Jeelani, “Stab characterization of STF and
thermoplastic impregnated ballistic fabric composites,” Chapter 12 of Advanced Fibrous
Composite Materials for Ballistic Protection, Editors: Xiaogang Chen and Gwen Jones,
Woodhead Publishing, Cambridge, UK, ISBN: 978-1-78242-461-1, 2016, pp. 363-388.
Publications in Refereed Journal 1. “Bailey, J.A. and Jeelani, S. “Surface Integrity in Machining 18% Nickel Maraging
Steel”, ASME Transactions, 1974, pages 74-185.
2. Bailey, J.A, and Jeelani, S. “Determination of Subsurface Plastic Strain in Machining,
Using an Embossed Grid”, Wear, Vol. 36, No. 2, 1975, page 199- 206.
3. Bailey, J. A., Jeelani, S. and Baker, S. E. “Surface Integrity in Machining Quenched
and Tempered AISI 4340 Steel”, ASME, Journal of Engineering for Industry. 98 (3)
1976-1979.
4. Jeelani, S. “Measurement of Cutting Temperature in Machining Using Infrared
Photography”, Wear 68, 1981, pg. 191-202.
5. Bailey, J. A. and Jeelani, S. “State of Subsurface Region in Machining Solution
Treated and Aged 18% Nickel Maraging Steel”, Wear 72, 1981, pg. 237-243.
6. Jeelani, S. and Reddy, P. A. “A Study of Cumulative Fatigue Damage in 2011-T3
Aluminum Alloy”, Journal of Materials Science and Engineering, 561 1982, pg.
237-243.
7. Jeelani, S. and Ramakrishnan, K. “Subsurface Plastic Deformation in Machining
Annealed 18% Nickel Maraging Steel”, Wear, 85 1982, pg. 263-273.
8. Jeelani, S. and Ramakrishnan, K. “Determination of Subsurface Plastic Strain
8
Distribution in the Machining of Red Brass”, Wear, 85 1983, pg. 67-69.
9. Jeelani, S. and Ramakrishnan, K. “Determination of Subsurface Plastic Strain in the
Machining of 6-2-4-2 Titanium Alloy”, Wear, 85 1983, pg. 121-130.
10. Jeelani, S. and Aslam, M. “A Study of Cumulative Fatigue Damage in 2024-T4
Aluminum Alloy”, Wear, 939, 1984, pg. 207-217.
11. Jeelani, S. and Musial, M. “Effect of Cutting Speed and Tool Rake Angle on the
Fatigue Life of Aluminum Alloy 2024-T351”, International Journal of Fatigue. 6(3)
1984, pg. 169-172.
12. Aslam, M. and Jeelani, S. “Prediction of Cumulative Fatigue Damage”, Journal of
Materials Science, 20 1985, pg. 3232-3244.
13. Jeelani, S. and Ramakrishnan, K. “Surface Damage in Machining Red Brass”, Journal
of Material Science, 20 1985, pg. 3011-3017.
14. Jeelani, S. and Ramakrishnan, K. “Surface Damage in Machining 6A1-2Sn-4Zr-
2Mo. Titanium Alloy”, Journal of Materials Science, 20 1985, pg. 3425-3252.
15. Jeelani, S. and Musial, M. “Dependence of Fatigue Life on the Surface Integrity in
the Machining of 2024-T351 Aluminum Alloy”, Part I, “Un-lubricated Conditions”.
Journal of Material Science, 20(1) 1986, pg. 155-160.
16. Jeelani, S. and Musial, M. “A Study of Cumulative Fatigue Damage in AISI 4130
Steel”, Journal of Materials Science, 21(1) 1986, pg. 2109-2113.
17. Jeelani, S., Ghebremedhin, S. and Musial, M. “A Study of Cumulative Fatigue
Damage in Titanium 6A1-4V Alloy”, International Journal of Fatigue, 8 No. 1, 1986,
pg. 23-27.
18. Jeelani, S. and Bailey, J. A. “Residual Stress Distribution in Machining Annealed
18% Nickel Maraging Steel”, ASME Journal of Materials Science and
Technology, Vol. 108 (1986) 93-98.
19. Jeelani, S., Biswas, S. and Natarajan, R. “Effect of Cutting Speed and Tool Rake
Angle on Residual Stress Distribution in Machining 2024-T351 Aluminum
Alloy”, “A Study of Cumulative Fatigue Damage in AISI 4130 Steel”, Journal of
Materials Science, 21, 1986, pg. 2705-2710.
20. Jeelani, S., Natarajan, R. and Reddy, G. R. “A Sub-sized Fatigue Specimen”,
International Journal of Fatigue 8, No. 3(1986).
21. Mazumdar, P. and Jeelani, S. “Fatigue Crack Propagation Rate Model Based on a
Dislocation Mechanism”, Journal of Materials Science Letters, 5 (1986) 972- 974.
22. Mazumdar, P. and Jeelani, S. “Plastic Deformation – Its Role in Fatigue Crack
Propagation”, Journal of Materials Science, 21, 1986, pg. 3611-3614.
23. Jeelani, S. and Collins, M. R. “Effect of Electric Discharge Machining on the
Fatigue Life”, International Journal of Fatigue, 10 No. 2 (1988) pg. 121-125.
24. Jeelani, S. and Scott, M. A. “How Surface Damage Removal Affects Fatigue
Life”, International Journal of Fatigue, 10 No. 4 (1988) pg. 257-260
25. Haque, A., Copeland, C. W., Zadoo, D. P. and Jeelani, S. “Hygrothermal Influence
on Flexural Properties of Kevlar-Graphite/Epoxy Hybrid Composites”, Journal of
Reinforced Plastics and Composites, Vol. 9, November 1990, pp. 602-613
26. Haque, A. Moorehead, L., Zadoo, D. P. and Jeelani, S. “Hygrothermal Influence on
interlaminar Shear Strength of Kevlar-Graphite/Epoxy Hybrid Composites”, Journal
of Materials Science, 25, 1990, pg. 4639-4643.
27. Haque, A., Mahmood, S., Walker, L. and Jeelani, S. “Moisture and Temperature
Induced Degradation in Tensile Properties of Kevlar 49/Graphite-Epoxy Hybrid
9
Composites”, Journal of Reinforced Plastics and Composites, Vol. 10/No. 2, March
1991, pp. 132-145.
28. Jordan, K., Clinton, R. and Jeelani, S. “An Evaluation of the Interfacial Bond
Properties between Carbon Phenolic and Glass Phenolic Composites”, Journal of
Materials, 26 (1991), 6016-6022.
29. Rangaswamy, P Terutung, H. and Jeelani, S. “Effect of Grinding Conditions on the
Fatigue Life of Titanium 5AL-2.5SN Alloy”, Journal of Materials Science, 26 No.
10 pp. 2701-2706, 1991.
30. Haque, A. and Jeelani, S. “Environmental Effects on the Compressive Properties:
Thermosetting vs. Thermoplastic Composites”, Journal of Reinforced Plastics and
Composites, Vol. 2, February 1992, pp. 146-157.
31. Huq, N., Haque, A. and Jeelani, S. “Fracture Toughness Measurements onSiC/Al203
Composite” Journal of Material Science, 27 (1992) pp. 5989-5993.
32. Mahfuz, H., Sue, D., Jeelani, S., Baker, D. M. and Johnson, S. “Non-Linear Response
of 2-D Carbon-Carbon Composites by Layered Shell Elements”, Developments in
Theoretical and Applied Mechanics in, Vol. 16, (1992) pp. III.I. 62-72.
33. Mahfuz, H., Ingram, C. I. and Jeelani, S. “Compressive Response of Thermoplastic
Composites by Layered Shell Elements”, Computers in Engineering, Vol. 2, ASME,
1992, pp. 95-101.
34. Salekeen, S., Haque, A., Copes, J. S., Mahfuz, H. and Jeelani, S. “Effects of
Reinforcement Geometry on the Mechanical Properties of SiC/Al203 Composites
and Prediction of Flexural Properties by Energy Method”, Journal of Composites
Engineering, Vol. 2, No. 4, pp. 239-247, 1992.
35. Mahfuz, H., Yu, T. and Jeelani, S. “High Cycle Fatigue Characterization of
Titanium 5A1-2.5Sn Alloy”, Journal of Materials Science, 28 (1993) pp. 138-144.
36. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., “Failure
Mechanisms in Mission Cycled Carbon/Carbon Composites under Flexural Load at
Room and Elevated Temperatures”, Journal of Materials Science, 28 (1993) pp. 5880-
5886.
37. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., “Effect of Mission
Cycling on the Fatigue Performance of SiC Coated Carbon-Carbon Composites”,
International Journal of Fatigue, Vol. 15, No. 4 (1993) pp. 283-291.
38. Mahfuz, H., Das, P. S., Xue, D., Krishnagopalan, J. and Jeelani, S. “A Combined
Experimental and Finite Element Study to Predict The Failure Mechanisms in SiC
coated Carbon/Carbon Composites at Room and Elevated Temperatures Under
Flexural Loading”, Journal of Reinforced Plastics and Composites, Vol. 12, No.
7, July 1993, pp. 825-842
39. Haque, A., Krishnagopalan, J. and Jeelani, S. “Fatigue Damage in Laminated
Composites”, Journal of Reinforced Plastics and Composites, Vol. 12, No. 10
October 1993, pp. 1058-1069.
40. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. M. and Johnson, S. “Response of SiC
Coated Carbon-Carbon Composites at Room and Elevated Temperatures under
Tensile Loading”, Composite Science and Technology, 50 (1994) 411-422.
41. Haque, A., Mahfuz, H., Ingram, C. and Jeelani, S. “Response of Thermoplastic and
Thermosetting Composites Under Compressive Loading- An Experimental and
Finite Element Study”, Composites Engineering, Vol. 4, No. 6, 1994, pp. 637-651.
42. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Structural and Functional
10
Carbon/Carbon Composites after First Carbonization”, Journal of Advanced
Materials, Vol. 26, No. 2, pp. 41-47, 1995.
43. Mahfuz, H., Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S., “Fracture and
Flexural Characterization of SiCw/SiC Composites at Room and Elevated
Temperatures”, Journal of Materials Science, 1995, Vol. 30, pp. 2406-2411.
44. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. “Fatigue Damage and
Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites”,
Theoretical and Applied Fracture Mechanics, 24 (1995), 21-31.
45. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Damage and
Residual Strength of Resin Transfer Molded Composites under Reversed Cyclic
Loading," Innovative Processing and Characterization of Composite Materials,
ASME 1995, NCA-Vol. 20/AMD-Vol.21 1, pp. 77-88.
46. Mahfuz, H., Haque, A., Yu, D. and Jeelani, S. “Response of Resin Transfer
(RTM) Composites under Reverse Cyclic Loading”, Transaction of the ASME,
Journal of Engineering Materials and Technology, Vol. 118, pp. 49-57, 1996..
47. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Sandwich and Hybrid Carbon-
Carbon Composites", Journal of Reinforced Plastics and Composites, Vol. 15,
October 1996, pp. 988- 1010.
48. Vaidya, U. K., Dadzie, P., Haque, A., Mahfuz, H. and Jeelani, S. "NDE and
Characterization of Micro fibers Modified Textile Carbon/Phenolic and
Carbon/Carbon Composites”, Journal of Reinforced Plastics and Composites, Vol.
16, No. 11, 1997, pp. 968- 1001.
49. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. "Response of
SiCfSi3N4 Composites under Cyclic Loading - An Experimental and Statistical
Analysis," Transaction of the ASME, Journal of Engineering Materials and
Technology, Vol. 119, pp 186-193, April 1997.
50. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “Fatigue Damage in S2-
Glagg/Vinyl Ester Thick Composites”, NCA-Vol. 24, ASME, 1997, pp.247-257.
51. Gajiwala, H. M., Vaidya, U. K., Sodah, S. and Jeelani, S. “ Hybridized Resin
Matrix Approach Applied for Development of Carbon/Carbon Composites: Part- I”,
Carbon, Vol. 36, No. 7-8, pp. 903-912, 1998.
52. Mahfuz, H., Saha, M., Biggs, R. and Jeelani, S. "Damage Tolerance of Resin
Infiltrated Composites under Low Velocity Impact - Experimental and Numerical
Studies," Key Engineering Materials, Trans. Tech Publications, Switzerland, Vol.
141-143 (1998), pp. 209-234.
53. Mahfuz, H., Lokesh, B., Vaidya, U. K. and Jeelani, S. "Experimental and Finite
Element Hybrid Stress Analysis of Thick Section S2-Glass Composites,"
Developments in Theoretical and Applied Mechanics, Vol. 9 (I 998), pp. 117-128.
54. Mahfuz, H., Mian, A. K. M., Vaidya, U. K., Brown, T. and Jeelani, S. "Finite Element
Study of the Fiber-Matrix Interface Behavior of [0/90] Laminated Composites Under
Tensile Loading," Journal of Materials Science, 33 (1998)2965-2973.
55. Vaidya, U. K., Kamath, M. V., Mahfuz, H. and Jeelani, S. "Low Velocity Impact
Response of Resin Infusion molded foam Filled Honeycomb Sandwich Composites,"
Journal of Reinforced Plastics and Composites, Vol. 17, No. 9, 1998, pp. 819-849.
56. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Tensile Behavior
of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An
Experimental and Numerical Study," Key Engineering Materials, Vols. 164-165
11
(1999) pp. 341-344.
57. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S. "Stress Wave
Propagation through Fiber and Matrix in a Cylindrical Composite Coupon”, Physics
and Modern Topics in Mechan Topics in Mechanical and Electrical Engineering,
(ISBN: 960-8052-10-6), World Scientific and Engineering Society Press, pp. 151-
158, 1999.
58. Hosur, M. V., Vaidya, U. K., Abraham, A., Jadhav, N. and Jeelani, S. “Static and
High Strain Rate Compression Response of Thick Section Twill Weave S2-
Glass/Vinyl Ester Composites Manufactured by Affordable Liquid Molding
Processes”, Journal of Engineering Materials and Technology, Vol. 121, No. 4,
October 1999, pp. 468-475
59. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H., and Jeelani, S. “Low
Velocity Impact Characterization of Unreinforced Vinyl Ester 411-350 and 411- C50
Resin Systems," Polymer & Polymer Composites, Vol. 7, No. 6, 1999, pp. 383-407.
60. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Mahfuz, H. and Jeelani, S.
"Manufacturing and Low Velocity Impact Response of Sandwich Composites
with Hollow and Foam Filled Z-Pin Reinforced Core," Journal of Composites
Technology and Research, JCTRER, Vol. 21, No.2, April 1999, pp. 84-97.
61. Vaidya, U. K., Hosur, M. V., Earl, D. and Jeelani, S. “Impact Response of Integrated
Hollow Core Sandwich Composite Panels”, Composites Part A: Applied science and
Manufacturing Vol. 31 (8), 2000 pp. 761-772.
62. Mahfuz, H., Zhu, Y., Haque, A., Vaidya, U. K. and Jeelani, S. "Investigation of High
Velocity Impact on Integral Armor Using Finite Element Method," International
Journal of Impact Engineering, Vol. 24, No. 2 (2000), pp. 203-217.
63. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S. “An Innovative
Technique for Measuring the High Strain Rate Response of Sandwich Composites,"
Composite Structures, 50 (2000) 279-285.
64. Mahfuz, H., Zaman, K., Hisham, M. Foy, C., Haque, A. and Jeelani, S. "Fatigue Life
Prediction of Thick-Section S2-Glass/Vinyl-Ester Composites under Flexural
Loading," Transaction of ASME, Journal of Engineering Materials and Technology,
Vol. 122, October 2000, pp. 402-408.
65. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Damage
Evolution in Low-Velocity Impacted Unreinforced Vinyl Ester 411-350 and 411-C50
Resin Systems," Polymer Composites, No. 6, Vol. 21, December 2000, pp.878-899.
66. Hosur, M. V., Alexander, J. Vaidya U. K. and Jeelani, S. "High Strain Rate
Compression Response of Carbon/Epoxy Laminate Composites," Journal of
Composite Structures, 52 (2001), 405-417.
67. Mahfuz, H., Mamun, W., Austin, L., Haque, A. and Jeelani, S. "New Formulations
for Hopkinson Bar Technique to Extract a Response of the Constituent Material in
Composite Specimens," Journal of Materials: Design and Applications, Vol.
215,(2001) pp. 15-27.
68. Hosur, M. V., Abraham, A., Jeelani, S. and Vaidya, U. K. "Studies on the Influence
of Through-The-Thickness reinforcement on Low-Velocity and High Strain rate
response of Woven S2-Glass/Vinyl Ester Composites," Journal of Composite
Materials, Vol. 35, No. 12,(2001), 1111-1133.
69. Gama, B., Gillespie, J., Mahfuz, H., Bogetti, T., Fink, B. and Jeelani, S. "High
Strain Rate Behavior of Plain-Weave S-2 Glass/Vinyl ester Composites," Journal of
12
Composite Materials, Vol. 35, No. 13 (2001), pp. 1201-1228.
70. Mahfuz, H., Mamun, W. and Jeelani, S. "High Strain Rate Response of Sandwich
Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced
Materials, Vol. 34, No. 1, January (2002), pp. 22-26.
71. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Dynamic Mechanical Analysis
and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002), pp. 175-183.
72. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. "Dynamic Compression of Cellular
Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002), pp.
505-512.
73. Mahfuz, H., Mamun, W. and Jeelani, S. "High Strain Rate Response of Sandwich
Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced
Materials, Vol. 34, No. 1, January (2002), pp. 22-26.
74. Kanny K., Mahfuz, H., Thomas, T. and Jeelani, S. "Dynamic Mechanical Analysis
and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002), pp. 175-183.
75. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. "Dynamic Compression of Cellular
Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002), pp.
505-512.
76. Mahfuz, H., Gama, B., Das, P., Jeelani, S., Gillispie, J. and Fink, B., "Response of
S2-Glass/Vinyl Ester Composites under High Strain Rate Loading - An Experimental
and Finite Element Study," Journal of Advanced Materials, Vol. 35, No. 4(2003),
pp.36-43.
77. Kulkarni N., Mahfuz, H., Jeelani, S. and Carlsson, L. "Fatigue Crack Growth and
Life Prediction in Foam Core Sandwich Composites under Flexural Loading,"
Composite Structures, 59 (2003), pp. 499-505.
78. Haque, A., Hossain M. K., “Effects of Moisture and Temperature on High Strain
Rate Behavior of S2-Glass-Vinyl Ester Woven Composites,” Journal of Composite
Materials, Vol. 37 (7), (2003), pp. 627-647.
79. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S., "High
Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Composites"
Journal of Reinforced Plastics and Composites, Vol. 22, No. 3, (2003), pp. 271-296.
80. Hosur, M. V., Islam, W., Jeelani, S., Vaidya, U. K., and Dutta, P. "Effect of
Temperature and Moisture on the High Strain Rate Response of Graphite/Epoxy
Composites," Journal of Engineering Materials and Technology, Vol. 125, (2003),
pp.1-8.
81. Hosur, M. V., Myers, D., Vaidya, U. K. and Jeelani, S. "Studies on the Repair of
Ballistic Impact Damage in S2-Glass/Epoxy Laminates," Composite Structures, 61,
No. 4 (2003), pp. 281-290.
82. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Studies on
Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite
Laminates"' Journal of Reinforced Plastics and Composites, Vol. 22, No. 10 (2003),
pp.927-952.
83. Hosur, M. V., Adya, M, Vaidya, U. K., Mayer, A. and Jeelani, S. "Effect of Stitching
and Weave Architecture on the High Strain Rate Compression Response of
Affordable Woven Carbon/Epoxy Laminates," Composite Structures, 59 (2003), pp.
507-523.
84. Hosur, M. V., Karim, M. R. and Jeelani, S. "Experimental Investigation on the
Response of Stitched/Unstitched Woven S2-Glass/SC-15 Epoxy Composites under
13
Single and Repeated Low Velocity Impact Loading" Composite Structures, 61, No.
1-2 (2003), pp.89-102.
85. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Off- Axis
High Strain Rate Characterization of Plain Weave Carbon/Epoxy Composites,"
Polymers and Polymer Composites, Vol. 11, No. 7 (2003), pp. 527-540.
86. Chakravarty, U., Mahfuz, H., Saha, M. and Jeelani, S.," Strain Rate Effects on
Sandwich Core Materials: An Experimental and Analytical Investigation," Acta
Materialia, 51 (2003) 1469-1479.
87. Mahfuz, H., Adnan, A., Vijaya Rangari, and Jeelani, S., "Carbon
Nanoparticles/Whiskers Reinforced Composites and their Tensile Response," 48th
International SAMPE Symposium, Long Beach CA, Vol. 48, May 11-15 (2003),
pp. 2559-2571.
88. Hosur, M. V., Adya, M., Vaidya, U. K., Dutta, P. and Jeelani, S. “Experimental
Studies on the High Strain Rate Compression Response of Woven Graphite/Epoxy
Composites at Room and Elevated Temperatures,” Journal of Reinforced Plastics and
Composites, Vol. 23, No. 5 (2004), pp. 491-514.
89. Hosur, M. V., Alexander, J., Vaidya, U.K., Mayer, A. and Jeelani, S. “Studies on the
Off-Axis High Strain Rate Compression Loading of Satin Weave Carbon/Epoxy
Composites," Composite Structures, Vol. 63 (2004), pp.75-85.
90. Hosur, M. V., Karim, R. M., and Jeelani, S. "On the Response of Stitched S2-
Glass/Epoxy Composites to High Strain Rate Compression Loading," Polymer
and Polymer Composites, Vol. 12, No. 3 (2004), pp.183-196.
91. Hosur, M. V., Vaidya, U. K., Ulven, C. and Jeelani, S. "Performance of
Stitched/Unstitched Woven Carbon/Epoxy Composites Under High Velocity Impact
Loading," Composite Structures, Vol. 64, No. 3-4, (2004), pp. 455-466.
92. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Experimental
Studies on the Dynamic Punch Shear Characterization of Satin Weave
Graphite/Epoxy Composites," Materials Science Engineering A., 368, (2004), pp.
269-279.
93. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact
Characterization of Hollow-Core Sandwich Composites with Hybrid Face sheets,"
Composite Structures, Vol. 65, No.1 (2004), pp. 103-115.
94. Hosur, M. V., Karim, R. and Jeelani, S. "Studies on Stitched Woven S2-
Glass/Epoxy Laminates under Low Velocity and Ballistic Impact Loading," Journal
of Reinforced Plastics and Composites, Vol. 23, No. 12 (2004), pp. 1313- 1324.
95. Hosur, M. V., Abdullah, M. and Jeelani, S. "Studies on Low-Velocity Impact
Response of Woven Hybrid Composites," Composite Structures, Vol. 67, No. 3
(2004), pp. 253-262.
96. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact
Characterization of Foam-Filled 3-D Integrated Core Sandwich Composites with
Hybrid Face Sheets," Composite Structures, Vol. 69, No. 2 (2004), pp. 167-181.
97. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S., "Fatigue of Cross-linked and
Linear PVC Foams under Shear Loading," Journal of Reinforced Plastics and
Composites, Vol. 23 No. 6 (2004), pp. 601-612.
98. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S.," High Strain Rate Response of
Cross-linked & Linear PVC Foams," Journal of Reinforced Plastics and Composites,
Vol. 23, No. 7 (2004), pp. 739-749.
14
99. Kulkarni, N., Mahfuz, H. and Jeelani, S., “Fatigue Failure Mechanism and Crack
Growth in Foam Core Sandwich Composites under Flexural Loading,” Journal of
Reinforced Plastics and Composites, Volume 23, No. 1(2004), pp. 83-94.
100. Thomas, T., Mahfuz, H., Kanny, K., and Jeelani, S.," Dynamic Compression of
Sandwich Composites at Sub-Ambient Temperatures," Journal of Composite
Materials, Vol. 38, No. 8 (2004), pp. 641-654.
101. K., Mahfuz, H., Thomas, T., and Jeelani, S, "Static and Dynamic Characterization of
Polymer Foams under Shear Loads, Journal of Composite Materials, Vol. 3, No. 8
(2004), pp. 629-640.
102. Mahfuz, H., Rangari, V., Islam, M., and Jeelani, S.," Fabrication, Synthesis and
Mechanical Characterization of Nanoparticles Infused Polyurethane Foams,"
Composites Part A: Applied Science and Manufacturing, Vol. 35 No. 4 (2004), pp.
453-460.
103. Mahfuz, H., Islam, M., Rangari, V., Saha, M. and Jeelani, S., "Response of Sandwich
Composites with Nanophased Cores under Flexural Loading," Composites Part B: 35
(2004) 543-550.
104. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, "Carbon Nanoparticles/Whiskers
Reinforced Composites and their Tensile Response," Composites Part A: Applied
Science and Manufacturing, Vol. 35 (2004) 519-527.
105. Mahfuz, H., Majumdar, P., Saha, M. and Jeelani, S., "Integral Manufacturing of
Composite Skin-Stringer Assembly and their Stability Analyses," Applied Composite
Materials, 11 (3): (2004)155-171.
106. Chisholm, N., Mahfuz, H., Rangari, V., Ashfaq, A. and Jeelani, S., “Fabrication and
Mechanical Characterization of Carbon/Epoxy Nanocomposites,” Composite
Structures 67 (2005) 115-124.
107. Saha, M., Joarder, C., Mahfuz, H., Jeelani, S., Srinivasgupta, D., Joseph, B., Thomas,
M., and Christensen, S., “Manufacturing and Tensile Characteristics of Integral
Sandwich Tee Joints,” Journal of Advanced Materials, 37(1) (2005), 53-60.
108. Mahfuz, H., Baseer, M.A., Rangari, V., Jeelani, S. “Fabrication, Characterization and
Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal,
41(2) (2005), 40-48.
109. Saha, M., Mahfuz, H., Chakravarty, U., Uddin, M., Kabir, M., Jeelani, S., “Effect of
Density, Microstructure, and Strain Rate on Compression Behavior of
Polymeric Foams,” Materials Science and Engineering A, 406(1-2) (2005), 328-
336.
110. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, “Manufacturing and
Characterization of Carbon Nanotube/Polyethylene Composites,” International
Journal of Nanoscience (IJN), 4(1) (2005), 55-72.
111. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich
Composites; Effects of Core-Skin Debonding and Core Density," Applied Composite
Materials, 2(2) (2005), 73-91.
112. Rodgers, R., Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., “Infusion of
Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical
Response," Macromolecular Materials & Engineering, 290(5) (2005), 423-429.
113. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Dynamic
Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room
and Elevated Temperatures,” Composite Structures, 70(3) (2005), 295-307.
15
114. Saha, M., Joarder, C., Mahfuz, H., Jeelani, S., Srinivasgupta, D., Joseph, B., Thomas,
M., and Christensen, S., “Manufacturing and Tensile Characteristics of Integral
Sandwich Tee Joints,” Journal of Advanced Materials, 37(1) (2005), 53-60.
115. Mahfuz, H., Baseer, M.A., Rangari, V., Jeelani, S. “Fabrication, Characterization and
Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal,
41(2) (2005), 40-48.
116. Saha, M., Mahfuz, H., Chakravarty, U., Uddin, M., Kabir, M., Jeelani, S., “Effect of
Density, Microstructure, and Strain Rate on Compression Behavior of Polymeric
Foams,” Materials Science and Engineering A, 406(1-2) (2005), 328- 336.
117. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, “Manufacturing and
Characterization of Carbon Nanotube/Polyethylene Composites,” International
Journal of Nanoscience (IJN), 4(1) (2005), 55-72.
118. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich
Composites; Effects of Core-Skin Debonding and Core Density," Applied Composite
Materials, 2(2) (2005), 73-91.
119. Rodgers, Rene, Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., “Infusion of
Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical
Response," Macromolecular Materials & Engineering, 290(5) (2005), 423-429.
120. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Dynamic
Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room
and Elevated Temperatures,” Composite Structures, 70(3) (2005), 295-307.
121. Hosur, M. V., Abdullah, M., and Jeelani, S. “Manufacturing and Low-Velocity
Impact Characterization of Foam Filled 3-D Integrated Core Sandwich Composites
with Hybrid Face Sheets,” Composite Structures, 69(2) (2005), 167-181.
122. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Studies on the
Low-Velocity Impact Response of Woven Hybrid Composites,” Composite
Structures, 67(3) (2005), 253-262.
123. Zhou, Y., Mahfuz, H., and Jeelani, S., “Numerical Simulation for High Strain
Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of
Damage Mechanics, 14(4) (2005), 321-341.
124. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., “Testing and Evaluation on the
Thermal and Mechanical properties of Carbon Nano Fiber reinforced SC-15 Epoxy,”
Materials Science and Engineering A, 405(1-2) (2005), 246-253.
125. Zhou, Y., Rangari, V., Mahfuz, H., Jeelani, S., and P. K. Mallick, “Thermal and
Mechanical behavior of Polypropylene, Talc-filled Polypropylene and Polypropylene
Nanocomposites,” Materials Science and Engineering A, 402(1-2) (2005), 109-117.
126. Abdullah, M., and Jeelani, S. “Manufacturing and Low-Velocity Impact
Characterization of Foam Filled 3-D Integrated Core Sandwich Composites with
Hybrid Face Sheets,” Composite Structures, 69(2) (2005), 167-181.
127. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Studies on the
Low-Velocity Impact Response of Woven Hybrid Composites,” Composite
Structures, 67(3) (2005), 253-262.
128. .Zhou, Y., Mahfuz, H., and Jeelani, S., “Numerical Simulation for High Strain
Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of
Damage Mechanics, 14(4) (2005), 321-341.
129. Zhou, Y., Pervin, F., Biswas, M., Rangari, V., and Jeelani, S., "Fabrication and
Characterization of Montmorillonite Clay-filled SC-15 Epoxy," Materials Letters,
16
60(7) (2006), 869-873.
130. Zhou, Y., Baseer, M., Mahfuz, H., and Jeelani, S., "Monte Carlo Simulation on
Tensile Failure Process of Unidirectional Carbon Fiber Reinforced Nano-Phased
Epoxy," Materials Science and Engineering A, 420(1-2) (2006), 63-71.
131. Zhou, Y., Pervin, P., Rangari, V., and Jeelani, S., Fabrication and evaluation of carbon
nano fiber filled carbon/epoxy composite Materials Science and Engineering: A,
426(1-2) (2006), 221-228.
132. Hassan, M., Zhou, Y., Mahfuz, S., and Jeelani, S., "Effect of SiO2 nanoparticle on
thermal and tensile behavior of nylon-6," Materials Science and Engineering: A,
429(1-2) (2006), 181-188.
133. Mahfuz, H., Adnan, A., Rangari, V., Hasan, M., Jeelani, S., Wright, W. J., and
Deteresa, S. J., "Enhancement of Strength and Stiffness of Nylon 6 Filaments through
Carbon Nanotubes Reinforcement," Applied Physics Letters, 88(2006), 083119.
134. Chowdhury, F.H., Hosur, M.V., Jeelani, S., "Studies on the Flexural and
Thermomechanical Properties of Woven Carbon/Nanoclay-Epoxy Laminates,"
Materials Science and Engineering A, 421, 2006, 298-306.
135. Hosur, M.V., Waliul Islam, S.M., and Jeelani, S., "Dynamic Punch Shear
Characterization of Twill Weave Graphite/Epoxy Composites," Polymers and
Polymer Composites, Vol. 14, No. 2, 2006, pp. 135-143.
136. Rangari, V., Tarig A. Hassan, Yuanxin Zhou, Hassan Mahfuz1 and Shaik Jeelani,
“Cloisite Clay Infused Phenolic Foam Nanocomposite,” Journal of Applied Polymer
Science, 103, 308-314, 2007.
137. Mahfuz, Hassan; Hasan, Mohammad M.; Rangari, V., Jeelani, Shaik. “Reinforcement
of nylon-6 filaments with SiO2 nanoparticles and comparison of Young's modulus
with theoretical bounds,” Macromolecular Materials and Engineering, 292 (4), 437-
444, 2007.
138. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Rangari, V.,
Shaik Jeelani. “Enhancement of strength and stiffness of epoxy-based composites
using nanoparticle infusion and high magnetic fields,” Materials Letters, 61, 2535–
2539, 2007.
139. Rangari, V., Hassan, T., Zhou, Y., Mahfuz, H., Jeelani, and Prorok, B., “Cloisite Clay-
Infused Phenolic Foam Nanocomposites,” Journal of Applied Polymer Science, Vol.
103, 308-314 (2007).
140. Mahfuz, H., Hasan, M., Rangari, V., and Jeelani, S., “Reinforcement of Nylon 6
Filaments with SiO2 Nanoparticles and Comparison of Young’s Modulus with
Theoretical Bounds,” Macromolecular Materials & Engineering 2007, 292, 437-
444.
141. Adnan, A., Sun, C.T., and Mahfuz, H., “A molecular Dynamics Simulation Study to
Investigate the Effect of Filler Size on Elastic Properties of Polymer
Nanocomposites,” Composites Science and Technology 67 (2007) 348-356.
142. M. V. Hosur, M. Abdullah, S. Jeelani, “Dynamic Compression Behavior of Integrated
Core Sandwich Composites,” Materials Science and Engineering-A, Vol. 445-446,
2007, pp. 54-64.
143. M. V. Hosur, K. Jain, F. Chowdhury, S. Jeelani, M. R. Bhat, C. R. L. Murthy,
“Low-Velocity Impact Response of Carbon/Epoxy Laminates Subjected to Cold- Dry
and Cold-Moist Conditioning,” Composite Structures, Vol. 79, 2007, pp. 300-
311.
17
144. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Processing, Impact Response and
Damage Characterisation of Plain-Weave Carbon/Epoxy-Nanoclay
Nanocomposites,” Polymer and Polymer Composites, Vol. 15, No. 6, 2007, pp.425-
435.
145. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Experimental study
on the thermal and mechanical properties of multi-walled carbon nanotube- reinforced
epoxy,” Materials Science and Engineering: A, Volume 452-453, 2007 pp. 657-664.
146. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani and Thomas E. Lacy,
Nonlinear Constitutive Equation for Vapor-Grown Carbon Nanofiber-Reinforced SC-
15 Epoxy at Different Strain Rate, Materials Science and Engineering: A, 465, n 1-2,
Sep 15, 2007, p 238-246.
147. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Low-Velocity Impact Response and
Ultrasonic NDE of Woven Carbon/Epoxy-Nanoclay Nanocomposites,” Journal of
Composite Materials, Vol. 41, No. 18, 2007, pp. 2195-2212.
148. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani, “Effect vapor grown carbon nanofiber
on thermal and mechanical properties of epoxy,” Journal of Materials Science, v 42,
n 17, August, 2007, p 7544-7553.
149. F. H. Chowdhury, M.V. Hosur, S. Jeelani, “Investigations on the Thermal and
Flexural Properties of Plain Weave Carbon/Epoxy-Nanoclay Composites by Hand-
Layup Technique,” Journal of Materials Science, Vol. 42, No. 8, April, 2007, pp.
2690-2700.
150. Hasan, Yuanxin Zhou and Shaik Jeelani, “Thermal and tensile properties of aligned
carbon nanofiber reinforced polypropylene,” Materials Letters, Volume 61, Issue
4-5, February 2007, Pages 1134-1136.
151. Yuanming Xia, Ying Wang, Yuanxin Zhou and Shaik Jeelani, “Effect of strain
rate on tensile behavior of carbon fiber reinforced aluminum laminates ,”
Materials Letters, Volume 61, Issue 1, January 2007, Pages 213-215.
152. Yuanxin Zhou, Yuanming Xia, Ying Wang and Shaik Jeelani, “Experimental
study on tensile behavior of carbon fiber and carbon fiber reinforced aluminum at
different strain rate,” Applied Composite Materials, Volume 14, Number 1, January,
2007, pp. 17-31.
153. Rangari, V. T. A. Hassan, Yuanxin Zhou; Hassan Mahfuz, Shaik Jeelani; B. C.
Prorok, “Cloisite clay-infused phenolic foam Nanocomposites,” Journal of Applied
Polymer Science, v 103, n 1, Jan 5, 2007, p 308-314.
154. Theotokoglou, E.E., Hortis. D., Carlsson, L.A. and Mahfuz, H., “Numerical Study of
Fractured Sandwich Composites under Flexural Loading,” Journal of Sandwich
Structures and Materials 2008; 10; 75.
155. M. V. Hosur, A. A. Mohammed, S. Zainuddin, and S. Jeelani, “Impact Performance
of Nanophased Foam Core Sandwich Composites,” Materials Science and
Engineering, A Vol. 498, No. 1-2, 2008, pp. 100-109.
156. M. V. Hosur, A. A. Mohammed, and S. Jeelani, “Processing of Nanoclay Filled
Sandwich Composites and their Response to Impact Loading,” Journal of Reinforced
Plastic and Composites, Vol. 27, No 8, 2008, pp. 797-818.
157. Hosur M. V., Mayo Jr. J. B., Wetzel E., and Jeelani S., “Studies on the Fabrication
and Stab Resistance Characterization of Novel Thermoplastic-Kevlar Composites,”
Advanced Structural and Functional Materials for Protection, Solid State Phenomena
Vol. 136, 2008, pp. 83-92.
18
158. Ingram J., Yuanxin Zhou, Jeelani S., Lacy T., and Horstmeyer M.F., “Effect of strain
rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene,”
Materials Science and Engineering: A, 489(2008) Pages 99-106.
159. Jones I. K., Yuanxin Zhou, Jeelani S., Mabry J.M., “Effect of polyhedral- oligomeric-
sil-sesquioxanes on thermal and mechanical behavior of SC-15 epoxy,” Express
Polymer Letters, (2)2008: 494-501.
160. Rangari, V., Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium carbide
infused phenolic balsa foam nanocomposite,” International Journal of Nanoscience,
7, 235-243, 2008.
161. Rangari, V., Mohammed Yousuf, Shaik Jeelani, Merlyn X. Pulikkathara and Valery
N. Khabashesku, “Alignment of carbon nanotubes and reinforcing effects in Nylon-
6 polymer composite fibers,” Nanotechnology, 19, 245703-245712, 2008.
162. Hassan Mahfuz, Mohammad Hasan, Vinod Dhanak, Graham Beamson, Justin
Stewart, Rangari, V., and Shaik Jeelani, “Enhancing the properties of nylon 6
filaments with functionalized silica nanoparticles,” Nanotechnology, 19, 445702-
445706, 2008.
163. M. V. Hosur, A. A. Mohammed, S. Zainuddin and S. Jeelani, “Processing of Nanoclay
Filled Sandwich Composites and their Response to Low-Velocity Impact Loading,”
Composite Structures, Vol. 82, 2008, pp. 101-116.
164. Ayorinde, E., Gibson, R., Kulkarni, S., Deng, F., Mahfuz, H., Islam, S., Jeelani, S.,
“Reliable low-cost NDE of Composite Marine Sandwich Structures,” Composites:
Part B, 39 (2008) 226-241.
165. Rangari, V., Mohammad, I, Jeelani Yuanxin Zhou and Shaik Jeelani, “Fabrication
and characterization of MWCNT/thermoplastic microsphere nanocomposite foams,”
International Journal of Nanoscience, 7, 161-169, 2008.
166. Yuanxin Zhou, Peixuan Wu, Zhongyang Cheng, Joranda Ingram and Shaik Jeelani,
“Improvement in electrical, thermal and mechanical properties of epoxy by filling
carbon,” Express Polymer Letter, 2008, 2(1), 40-48.
167. Rangari, V., Shaik, M, Mahfuz, H. and Jeelani, S., “Fabrication and Characterization
of High Strength Nylon-6/Si3N4 Polymer Nanocomposites Fibers,” Materials Science
& Engineering A, (2008) DOI:10.1016/j.msea.2008.09.014.
168. B. Bey, Yuanxin Zhou, Shaik Jeelani, Ashok Kumar and L.D. Stephenson, “Nonlinear
constitutive equation for temperature degraded unidirectional carbon fiber
reinforced epoxy,” Materials Letters, Volume 62, Issues 21-22, 15 August 2008,
Pages 3659-3662.
169. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani and P.K. Mallick, “Improvement in
mechanical properties of carbon fabric-epoxy composite using carbon nanofibers,”
Journal of Materials Processing Technology, Volume 198, Issues 1-3, 3 March
2008, pp. 445-453.
170. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Fabrication and
characterization of carbon/epoxy composites mixed with multi-walled carbon
nanotubes,” Materials Science and Engineering: A, Volume 475, Issues 1-2, 25
February 2008, pp. 157-165.
171. Yuanxin Zhou, M.I. Jeelani, and Shaik Jeelani, “Fabrication and characterization of
carbon/epoxy composites mixed with multi-walled carbon nanotubes,” Materials
Science and Engineering: A, Volume 475, Issues 1-2, 25 February 2008, pp. 157-165.
172. Seyhan Boyoglu, Komal Vig, Shreekumar Pillai, Rangari, V., Vida A. Dennis,
19
Praseetha Subbarayan, Shree R. Singh, “Enhanced Delivery and Expression of
Nanoencapsulated DNA Vaccine Vector,” Nanomedicine: Nanotechnology, Biology
and Medicine, Volume 5, Issue 4, December 2009, Pages 463-472.
173. Jessie Mayo, Eric Wetzel, Mahesh Hosur, Shaik Jeelani, “Stab and Puncture
Characterization of Thermoplastic-Impregnated Aramid Fabrics,” International
Journal of Impact Engineering, Volume 36, Issue 9, September 2009, Pages 1095-
1105.
174. Rangari, V., Tarig A Hassan, Quentin Mayo and Shaik Jeelani, “Size reduction of
WO3 nanoparticles by ultrasound irradiation and its applications in structural
nanocomposites,” Composite Science and Engineering, 69, 2009, 2293-2300.
175. Mahesh V. Hosur, Orion Gebremedin, Shaik Jeelani, “Processing and Performance
Evaluation of Nanoclay Infused EPON 828,” Polymer & Polymer Composites, 17
(3), 2009, pp. 151-160.
176. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Rangari, V.,
Shaik Jeelani, “Reinforcement of SC-15 epoxy with CNT/CNF under high magnetic
field: an investigation of mechanical and thermal response,” J Mater Sci, 44:1113–
1120, 2009.
177. Rangari, V., Mohammed Y. Shaik and Shaik Jeelani, “Fabrication and
characterization of high strength Nylon-6/Si3N4 polymer nanocomposites fibers,”
Materials Science and Engineering A, 500, 92-97, 2009.
178. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Kumar, and S. Jeelani, “Durability
studies of montmorillonite clay filled epoxy composites under different
environmental conditions,” Materials Science and Engineering, 507, 2009, pp.
117–123.
179. Mahfuz, H., Clements, F., Rangari, V., Dhanak, V. and Beamson, G., “Enhanced
Stab Resistance with Functionalized Silica Nanoparticles,” Journal of Applied
Physics 105, 064307 (2009).
180. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance
of nanophased braided carbon/epoxy composites,” Materials Science and
Engineering B doi:10.1016/j.mseb.2009.10.015, 2009.
181. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani, “Low –Velocity Impact Response of
Sandwich Composites with Nanophased Foam Core and Biaxial (±45°) Braided Face
Sheets,” Composites Part B: Engineering, Volume 40, Issue 6, September 2009,
Pages 561-571.
182. Mahfuz, H., Zainuddin, S., Parker, M.R., Al-Saadi, T., Rangari, V., and Jeelani,
S., “Reinforcement of SC-15 Epoxy with CNT/CNF under High Magnetic Field –
An Investigation of Mechanical and Thermal Response,” Journal of Materials
Science, Volume 44, Number 4, January 2009, Pages 1113-1120.
183. S. Zainuddin, M. V. Hosur, A. Kumar, and S. Jeelani, “Durability Study of
Neat/Nanophased GFRP Composites Subjected to Different Environmental
Conditioning,” Materials Science and Engineering A, 527, 2010, pp. 3091-3099.
184. Yuanxin Zhou, Evert White, Mahesh Hosur, Shaik Jeelani, “Effect of particle size
and weight fraction on the flexural strength and failure mode of TiO2 particles
reinforced epoxy,” Materials Letters, 64, 2010, pp. 806-809.
185. Mahesh V. Hosur, Tamanna Rahman, Shaik Jeelani, “Mechanical and Thermal
Properties of Amine Functionalized Multi-walled Carbon Nanotubes Epoxy Based
Nanocomposite,” Composite Interfaces, Vol. 17, 2010, pp. 197-215.
20
186. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance
of nanophased braided carbon/epoxy composites,” Materials Science and
Engineering B, 168, 2010, pp. 22-29.
187. Tarig A Hassan, Rangari, V., and Shaik Jeelani, “Synthesis, processing and
characterization of shear thickening fluid (STF) impregnated fabric composites,”
Mat Sci &Eng-A, 527, 2892-2899, 2010.
188. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Synthesis and characterization
of (Fe3O4/MWCNTs) / Epoxy Nanocomposites,” J. Applied Polymer Science,
116, 2783-2792, 2010.
189. Rangari, V., Mohammad, Ghouse; Jeelani, Shaik; Butenko, Yuri; Dhanak, Vinod.
“Synthesis and characterization of diamond coated CNTs and their reinforcement in
Nylon-6 single fiber,” ACS Applied Materials & Interfaces 2010, 2 (7), 1829-1834.
190. Rangari, V., Ghouse M. Mohammad, Shaik Jeelani, Angel Hundley, Komal Vig,
Shree Ram Singh and Shreekumar Pillai, “Synthesis of Ag/CNTs hybrid
nanoparticles and fabrication of their Nylon-6 polymer nanocomposite fibers for
antimicrobial applications,” Nanotechnology, 21, 095102, 2010.
191. Tarig A. Hassan, Rangari, V., and Shaik Jeelani., “Sonochemical synthesis and
rheological properties of shear thickening dispersions,” J Ultrasonic and
sonochemistry, Volume 17, Issue 5, June 2010, Pages 947-952.
192. Rangri, V., Mohammad S. Bhuyan, Shaik Jeelani, “Microwave Processing and
Charactering of EPON 862/CNTs Nanocomposites,” Mat Sci & Eng –B, Volume
168, Issues 1-3, 15 April 2010, Pages 117-121.
193. Yuanxin Zhou, Yang Wang, Yuanming Xia, and Shaik Jeelani, Tensile behavior of
carbon fiber bundles at different strain rates, Materials Letters, Volume 64, Issue
3, 15 February 2010, Pages 246-248.
194. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan
Trovillion, and Yadira Perez, “Processing and characterization of epoxy
nanocomposites with MWCNT’s/CNF’s using thinky and 3-roll shear mixing
techniques,” Revista Matéria, 15, pp. 247–253, 2010.
195. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Tcherbi-Narteh, Ashok Kumar and S.
Jeelani, “Experimental and Numerical Investigations on Flexural and Thermal
Properties of Nanoclay-Epoxy Nanocomposites,” Materials Science & Engineering
A, Vol. 527, 2010 pp. 7920–7926.
196. Rangari, V., Mohammad Y.Shaik, Ghouse M. Mohammad, Shaik Jeelani,
Reinforcement of Si3N4 nanoparticles in Polypropylene single fibers through
melt extrusion process and their properties, Journal of Applied Polymer Science ,
121, 3,1512–1520, 2011.
197. Rangari, V., Mohammad S. Bhuyan, Shaik Jeelani, Comparative study of microwave
and thermal curing of high temperature epoxy/CNTs polymer nanocomposites and
their properties, International Journal of Nanoscience 10 (6),1225-1230, 2011.
198. M. K. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Physical, Mechanical,
and Degradability Properties of Chemically Treated Jute Fiber Reinforced
Biodegradable Nanocomposites,” Journal of Engineering Materials and Technology
(JEMT), Vol. 133, October 2011, pp. 041003:1-7.
199. M. K. Hossain, K. A. Imran, M. V. Hosur, and S. Jeelani, “Degradation of Mechanical
Properties of Conventional and Nanophased Carbon/Epoxy Composites in Seawater,”
21
Journal of Engineering Materials and Technology (JEMT), Vol. 133, October 2011,
pp. 041004:1-6.
200. Chinedu U. Okoro, Mohammad K. Hossain, Mahesh Hosur, and Shaik Jeelani,
“Mechanical Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed
by Dual Phase Dispersion Technique,” Journal of Engineering Materials and
Technology (JEMT), Vol. 133, October 2011, pp. 041009:1-4.
201. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Effect of Surface
Treatment and Nanoclay on Thermal and Mechanical Performances of Jute/Biopol
Green Composites,” Journal of Reinforced Plastics and Composites, Vol. 30, N0. 22,
2011, pp. 1841-1856.
202. Tiffany Williams, Mahesh Hosur, Merlin Theodore, Anil N. Netravali, Vijaya
Rangari and Shaik Jeelani, “Time Effects on Morphology and Bonding Ability in
Mercerized Natural Fibers for Composite Reinforcement,” International Journal of
Polymer Science, vol. 2011, Article ID 192865, doi:10.1155/2011/192865.
203. Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur and Shaik Jeelani,
“Mechanical performances of surface modified jute fiber reinforced biopol
nanophased green composites,” Composites, Part B., 42 (2011) 1701-1707.
204. Mohammad K Hossain, Kazi Al Imran, Mahesh Hosur and Shaik Jeelani, “Effect of
Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy
Composites,” Cambridge Journal Online, Published online March 14, 2011.
205. Mohammad K Hossain, Mohammad W Dewan, Mahesh Hosur and Shaik Jeelani,
“Thermal and Mechanical Characterization of Jute-Biopol Nanophased Green
Composites,” Cambridge Journal Online 2011, DOI: 10.1557/opl.2011.169,
published online January 28, 2011
206. Muhammad E. Hossain, Mohammad K. Hossain, Mahesh V. Hosur and Shaik Jeelani,
“Study of Mechanical Responses and Thermal Expansion of CNF-modified Polyester
Nanocomposites Processed by Different Mixing Systems,” Cambridge Journal
Online, DOI:10.1557/opl.2011.111, published online January 28, 2011.
207. S. Zainuddin, M. V. Hosur, R. Barua, Ashok Kumar and S. Jeelani, “Effects of
ultraviolet radiation and condensation on static and high strain rate compression
behavior of nanoclay infused glass/ epoxy composites,” Journal of Composite
Materials, 45(18) 2011, pp. 1901-1918.
208. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Influence of
Functionalization on Properties of MWCNT-Epoxy Nanocomposites,” Materials
Science & Engineering A, Mater. Sci. Eng. A, Volume 528, Issue 3, 25 January
2011, pp. 1192-1200.
209. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Effects of
functionalisation on curing and decomposition behaviour of Epoxy-MWCNT
Nanocomposites,” Polymer and Polymer Composites, Vol. 20, No. 4, 2012, pp. 343-
352.
210. M. K. Hossain, M. E. Hossain, M. V. Hosur, and S. Jeelani, “Flexural and
Compression Response of Woven E-Glass/Polyester-CNF Nanophased Composites,”
Composites A, 42, 2011, 1174-1182.
211. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and
Shaik Jeelani, “Rheology, Flexure and Thermomechanical Characterization of
Epoxy/CNF Nanocomposites: Effect of Dispersion Techniques,” Polymers and
Polymer Composites, Vol. 20, No. 6, 2012, pp. 517-530.
22
212. Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Kailash C. Jajam, Hareesh
V. Tippur, Shaik Jeelani, “Mechanical characterization of epoxy composites modified
with reactive polyol diluent and randomly-oriented amino-functionalized
MWCNTs,” Polymer Testing, 31, 2012, pp. 1083-1093.
213. Muhammad M. Rahman, Mahesh Hosur, Adriane G. Ludwick, Shaik Zainuddin,
Ashok Kumar, Jonathan Trovillion, Shaik Jeelani, “Thermo-mechanical behavior of
epoxy composites modified with reactive polyol diluent and randomly-oriented
amino-functionalized multi-walled carbon nanotubes,” Polymer Testing, 31, 2012,
pp. 777-784.
214. M.M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, M.B.A. Salam, Ashok
Kumar, and S. Jeelani, “Improvements in mechanical and thermo-mechanical
properties of E-glass/epoxy composites using amino functionalized MWCNTs,”
Composite Structures, 94, 2012, pp. 2397-2406.
215. Yuanxin Zhou, Mahesh Hosur, Shaik Jeelani and P. K. Mallick, “Fabrication and
Characterization of Carbon Fiber Reinforced Clay/Epoxy Composite,” Journal of
Materials Science, 47: 2012, 5002-5012. DOI 10:1007/s 10853-012-6376-4.
216. Tarig A. Hassan, Vijay K. Rangari, Rohit K. Rana and Shaik Jeelani, Sonochemical
effect on size reduction of CaCO3 nanoparticles derived from waste Eggshells,
Ultrasonics Sonochemistry, 20, 5, 1308-1315, 2013.
217. Tarig hasan, Vijaya K. Rangari and Shaik. Jeelani, Mechanical and thermal
properties of bio-based CaCO3/Soybean based hybrid unsaturated polyester
nanocomposites, Journal of Applied Polymer Science 130,1442-1452, 2013 (Cover
page article). 218. Nydeia W. Bolden, Vijaya K. Rangari and Shaik Jeelani Seyhan Boyoglu Shree R.
Singh, Synthesis and evaluation of magnetic nanoparticles for biomedical
applications, Journal of nanoparticles doi: 10.1002/app.39227, 2013.
219. Tarig A. Hassan, Vijay K. Rangari, Shaik Jeelani, Sonochemical Synthesis and
Characterization of Bio-Based Hydroxyapatite nanoparticles, Int. J. Nano and
Biomaterials, 5, 5(2-3), pp. 103–112.
220. Vijaya K Rangari, Rahman Samsur, and Shaik Jeelani, Mechanical, thermal, and
conducting properties of CNTs / Bio-degradable Polymer Thin films, Journal of
Applied Polymer Science, 129: 1249–1255, 2013.
221. Vijaya K. Rangari Mohammed Yousuf and Shaik Jeelani, Synthesis and
characterization of SiC/Si3N4 hybrid nanoparticles and their applications in polymer
single fibers, J.Composites, 2013, Article ID 462914, 11 pages,
10.1155/2013/462914.
222. Tarig. A. Hassan, Vijaya K. Rangari, Fedric Baker and Shaik Jeelani, Synthesis of
hybrid SiC/SiO2 Nanoparticles and their polymer nanocomposites, International
Journal of Nanoscience, Vol 12, No 2, 1350008-1350015, 2013. 223. Vijaya K. Rangari, Ghouse M Mohammad, Boyoglu, Seyhan, Shaik Jeelani,
Synthesis of hybrid ZnO/CNTs nanoparticles and their reinforcement in Nylon-6
polymer fibers, Journal of Applied Polymer Science, 129, 1, 121–129, 2013.
224. R. Samsur, V. K. Rangari, S. Jeelani, L. Zhang and Z.Y. Cheng, Fabrication of CNTs
grown woven carbon fiber/epoxy composites and their electrical and mechanical
properties, J.Appl Phys. 113, 214903, 2013.
23
225. Mohammad Washim Dewan, Mohammad Kamal Hossain, Mahesh Hosur, and Shaik
Jeelani, “Thermo-Mechanical Properties of Alkali Treated Jute-Polyester/Nanoclay
Biocomposites Fabricated by VARTM Process,” accepted for publication in Applied
Polymer Science, 128 (6): 4110-4123, June 15, 2013.
226. M. K. Hossain, M. E. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Effects
of Carbon Nanofibers (CNFs) on Thermal and Interlaminar Shear Responses of E-
Glass/Polyester Composites”, Composites, Part B, Vol. 44, Issue 1, January 2013,
pp.313-320.
227. Rahman, M.M., Zainuddin, S., Hosur, M.V., Robertson, C.J., Kumar, A., Trovillion,
J., Jeelani, S., “Effect of NH2-MWCNTs on Crosslink Density of Epoxy Matrix and
ILSS Properties of E-glass/Epoxy Composites,” Composite Structures 95, January
2013, pp. 213-221.
228. Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, Uday Vaidya, Arefin Tauhid,
Ashok Kumar, Jonathan Trovillion and Shaik Jeelani, “Effects of amino-
functionalized MWCNTs on ballistic impact performance of E-glass/epoxy
composites using a spherical projectile,” International Journal of Impact Engineering,
75, 2013, pp. 108-118.
229. Victor A. Agubra, Peter S. Owour, Mahesh V. Hosur, “Influence of Nanoclay
Dispersion Methods on the Mechanical Behavior of E-Glass/Epoxy
Nanocomposites,” Nanomaterials, 3, 550-563, dio:10.3390/nano3030550, 2013.
230. M.B.A. Salam, M.V. Hosur, N. Jahan, M.M. Rahman, S. Jeelani, “Improvement in
Mechanical and Thermo-Mechanical Properties of Carbon fiber/Epoxy Composites
Using Carboxyl Functionalized Multi-Walled Carbon Nanotubes,” Journal of
Polymers and Polymer Composites, Vol. 21, No. 8, 2013, pp. 495-508.
231. N. Jahan, A. Narteh, M. Hosur, M. Rahman and S. Jeelani, “Effect of Carboxyl
Functionalized MWCNTs on the Cure Behavior of Epoxy Resin,” Open Journal of
Composite Materials, Vol. 3 No. 2A, 2013, pp. 40-47. doi:
10.4236/ojcm.2013.32A006.
232. M. Salam, M. Hosur, S. Zainuddin and S. Jeelani, “Improvement in Mechanical and
Thermo-Mechanical Properties of Epoxy Composite Using Two Different
Functionalized Multi-Walled Carbon Nanotubes,” Open Journal of Composite
Materials, Vol. 3 No. 2A, 2013, pp. 1-9. doi: 10.4236/ojcm.2013.32A001.
233. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and
Shaik Jeelani, “Effect of Processing Techniques on the Performance of
Epoxy/MWCNT Nanocomposites,” Journal of Applied Polymer Science, Volume
127, Issue 6, 15 March 2013, pp. 4211–4224.
234. Muhammad E Hossain, Mohammad K Hossain, Mahesh Hosur and Shaik Jeelani,
“Low-Velocity Impact Behavior of CNF-Filled Glass Reinforced Polyester
Composites,” Published online before print March 25, 2013, doi:
10.1177/0021998313480194.
235. Williams, T, Hosur, M., Vaidya, U., and Jeelani, S., “Effect of Alkali Treatment on
Physical Properties of Bio-based Composites,” Polymers and Polymer Composites,
Vol. 21, No. 1, 2013, pp. 9-19.
236. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs and Shaik Jeelani, “Effects of
Surface Treatments of Montmorillonite Nanoclay on Cure Behavior of Diglycidyl
Ether of Bisphenol A (DGEBA) Epoxy Resin,” Journal of Nanoscience, vol. 2013,
Article ID 864141, 12 pages, 2013. doi:10.1155/2013/864141.
24
237. Boniface J. Tiimob, Vijaya K. Rangari, Shaik Jeelani, Effect of Reinforcement of
Sustainable -CaSiO3 Nanoparticles in Bio-based Epoxy Resin System. J.
Appl.Polym. Sci. 2014, 131, 40867. DOI : 10.1002/APP.40867.
238. Tarig A. Hassan, Vijaya K. Rangari and Shaik Jeelani, “Value added Bio-polymer
nanocomposites from waste eggshell based CaCO3 nanoparticles as fillers” ACS
Sustainable Chemistry & Engineering, 2014, 2 (4), 706 -717.
239. Vitus Apalangya, Vijaya Rangari, Boniface Tiimob, Shaik Jeelani and Temesgen
Samuel, “Development of antimicrobial water filtration hybrid material from bio
source calcium carbonate and silver nanoparticles” Applied surface science, 295,
108-114, 2014.
240. Myisha Roberson, Vijaya Rangari, Shaik Jeelani, Temesgen Samuel and Clayton
Yates “Synthesis and Characterization of Silver, Zinc oxide and Hybrid silver/zinc
oxide nanoparticles for antimicrobial applications” Nanolif, Published: 20 February
2014. 10.1142/S1793984414400030.2, 2, 2014.
241. Diane Render, Khalda Fadlalla, Vijaya Rangari, Temesgen Samuel and Shaik Jeelani,
Bio-based Calcium Carbonate (CaCO3) Nanoparticles for Drug Delivery
Applications, Int. J. Biomedical Nanoscience and Nanotechnology, 3, 3, 2014. 242. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on
the Durability of Woven Carbon/Epoxy Composites Subjected to Ultraviolet
Radiation,” Mechanics of Advanced Materials and Structures, Volume 21, Issue 3,
March 2014, pages 222-236.
243. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs, Peter Owuor and Shaik Jelaani,
“Viscoelastic and Thermal Properties of Full and Partially Cured DGEBA Epoxy
Resin Composites Modified with Montmorillonite Nanoclay Exposed to UV
Radiation,” Polymer Degradation and Stability, Vol. 101, 2014, pp. 81-91.
244. Mohammad K Hossain, Md. Mahmudur R Chowdhury, Kazi A Imran, Mahmud B
Salam, Mahesh Hosur and Shaik Jeelani, “Effect of Low Velocity Impact Responses
on Durability of Conventional and Nanophased CFRP Composites Exposed to
Seawater,” Polymer degradation and stability, Vol.99, 2014, pp.180-189.
245. S. Zainuddin, A. Fahim, T. Arefin, M. V. Hosur, M. M. Rahman, J.D. Tyson, S.
Jeelani, “Optimization of Mechanical and Thermo-Mechanical Properties of Epoxy
and E-Glass/Epoxy Composites Using NH2-MWCNTs, Acetone Solvent and
Combined Dispersion Methods”, Composite structures, 110 (2014) 39-50.
246. S. Zainuddin, T. Arefin, M. V. Hosur, J.D. Tyson, Ashok Kumar, J. Trovillion, S.
Jeelani, “Recovery and Improvement in low-velocity impact properties of E-
glass/epoxy composites through novel self-healing technique,” Composite structures,
Vol. 108, 2014, pp. 277-286.
247. Mohammad K. Hossian, Md. Mahmudur R. Chowdhury, Mahmud B. Salam,
Jonathan Malone, Mahesh Hosur, Shaik Jeelani, Nydeia Wright Bolden, “Improved
Thermo-Mechanical Properties of Carbon Fiber Reinforced Epoxy Composite using
Amino Functionalized XDCNT,” Journal of Applied Polymer Science, Volume 131,
Issue 17, 5 September 2014.
248. Hossain, M.K., Karim, M.R., Chowdhury, M.R., Imam, M.A., Hosur, M., Jeelani, S.,
Farag, R., “Comparative mechanical and thermal study of chemically treated and
untreated single sugarcane fiber bundle,” Industrial Crops and Products, vol. 58, 2014,
pp. 78-90.
25
249. Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Nusrat Jahan, Everett B.
Miller-Smith, Shaik Jeelani, “Enhanced tensile performance of epoxy and E-
glass/epoxy composites by randomly-oriented amino-functionalized MWCNTs at
low contents,” Journal of Composite Materials, 0021998314525977, first published
on March 10, 2014.
250. Md. Reza-E-Rabby, Shaik Jeelani, Vijaya K. Rangari, “Structural Analysis of
Polyhedral Oligomeric Silsesquioxane (POSS) coated SiC Nanoparticles and Their
Applications in Thermoset Polymers”, J. Nanomaterials-2015.
251. B. Tiimob, V. Apalangya, T. Samuel, S. Jeelani, V. Rangari, Synthesis,
characterization and in vitro cytotoxicity assessment of eggshell-derived β-CaSiO3
nano biomaterial, British Journal of Applied Science and Technology, 8(2): 180-193,
2015, Article no. BJAST.2015.196
252. Akm Samsur Rahman, Vijaya Rangari, and Shaik Jeelani “Thermal and Mechanical
Properties of Woven Glass Fiber Reinforced Epoxy Composites with Carbon
Nanotubes Grown in-Situ”. The International Journal of Engineering and Science
(IJES) 4, 12, 54-61, 2015.
253. Md. Reza-E-Rabby, Shaik Jeelani, Vijaya K. Rangari Microwave processing of SiC
nanoparticles infused polymer composites: Comparison of thermal and mechanical
properties, J. Applied Polymer Science 132, 12, 2015.
254. Dereca Watkins, Md. Nuruddin, Mahesh Hosur, Alfred Tcherbi-Narteh and Shaik
Jeelani, “Extraction and Characterization of Lignin from Different Biomass
Resources,” Journal of Materials Research and Technology, 2015, 4(1), pp. 26-32,
http://dx.doi.org/10.1016/j.jmrt.2014.10.009.
255. Muhammad M. Rahman, Mahesh Hosur, Kuang-Ting Hsiao, Landon Wallace, Shaik
Jeelani, “Low velocity impact properties of carbon nanofibers integrated carbon
fiber/epoxy hybrid composites manufactured by OOA-VBO process,” Composite
Structures, Vol. 120, February 2015, pp. 32-40.
256. Md. Ekramul Islam, Muhammad M. Rahman, Mahesh Hosur, Shaik Jeelani,
“Thermal stability and kinetics analysis of epoxy composites modified with reactive
polyol diluent and multi-walled carbon nanotubes,” Journal of Applied Polymer
Science, Vol. 132, No. 9, March 5, 2015, DOI:10.1002/APP.41558.
257. Md. Ekramul Islam, Tanjheel H Mahdi, Mahesh V Hosur, Shaik Jeelani,
"Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with
Nanoclay and Carbon Nanotubes," Procedia Engineering (Elsevier), 105, pp. 821-
828, 2015.
258. Md. Nuruddin, M., Hosur, M., Uddin, M. J., Baah, D. and Jeelani, S., “A novel
approach for extracting cellulose nanofibers from lignocellulosic biomass by ball
milling combined with chemical treatment,” 2015, J. Appl. Polym. Sci., 133, 42990,
doi: 10.1002/app.42990
259. M. E. Hossain, M. K. Hossain, M. V. Hosur, S. Jeelani, “Effect of Dispersion
Conditions on the Thermal and Mechanical Properties of Carbon Nanofiber-Polyester
Nanocomposites,” Journal of Engineering Materials and Technology, July 2015, Vol.
137/31005:1-9.
260. Md. Nuruddin, Raju Gupta, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani,
“Synergistic Effect of Graphene Nanoplatelets and Nanoclay on Epoxy Polymer
Nanocomposites,” Advanced Materials Research 2015, Vol. 1119 pp. 155-159,
doi/10.4028/www.scientific.net/AMR.1119.155.
26
261. Reaz Chowdhury, Mahesh Hosur, Md. Nuruddin, Alfred Tcherbi-Narteh, Ashok
Kumar, Veera Boddu, Jonathan Trovillion and Shaik Jeelani, “Self-Healing epoxy
composite- Preparation, characterization and healing performance,” Journal of
Materials Research and Technology, 2015, 4(1), pp. 33-43,
http://dx.doi.org/10.1016/j.jmrt.2014.10.016.
262. Diane Render, Temesgen Samuel, Howard King, Madan Vig, Shaik Jeelani,
Ramapuram Jayachandra Babu, and Vijaya Rangari “Biomaterial-Derived Calcium
Carbonate Nanoparticles for Enteric Drug Delivery” Journal of Nanomaterials, 2016,
Article ID 3170248, 8 pages, http://dx.doi.org/10.1155/2016/3170248.
263. Boniface Jabik Tiimob, Shaik Jeelani, Vijaya Kumar Rangari, Eggshell reinforced
biocomposite-an advanced ‘green’ alternative structural material, Journal of Applied
Polymer Science- 2016, 133, 43124.
264. Muhammad A. Imam, M.G. Gomes, Eesperidiana.A.B. Moura, Shaik Jeelani and
Vijay.K.Rangari, “Electron-beam irradiation effect on thermal and mechanical
properties of Nylon-6 nanocomposite fibers infused with Diamond and Diamond
coated Carbon Nano Tubes”, International Journal of Nanoscience, 15, 1-2, 1650004-
12, 2016.
265. Fahim Abdullah, Shaik Zainuddin, Shaik Shoeib, Mahesh Hosur, Dawen Li,
Mackenzie Matthews, Shaik Jeelani, “Properties of Polyhydroxy Butyrate
Polyvalerate Biopolymeric Nanocomposites Reinforced with Natural Halloysite
Nanotubes,” Journal of Material Science and Technology Research 3, 2016, 7-16,
10.15377/2410-4701.2016.03.01.2.
266. S. Zainuddin, F. Abdullah, S. Shoieb, M. Hosur, D. Li, C. Hicks, S. Jeelani,
“Morphological and Mechanical Behavior of Chemically Treated Jute-PHBV Bio-
Nanocomposites Reinforced With Silane Grafted Halloysite Nanotubes,” Journal of
Applied Polymer Science, Vol. 133 (39), 2016, DOI:10.1002/app.43994
267. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effects of Different
Montmorillonite Nanoclay Loading on Cure Behavior and Properties of Diglycidyl
Ether Bisphenol A Epoxy,” Journal of Nanomaterials, Volume 2016, Article ID
3840348, 12 pages, 2016, doi:10.1155/2016/3840348.
268. Shatori Meadows, Mahesh Hosur, Alfred Tcherbi-Narteh and Shaik Jeelani,
“Rheological and Cure Kinetics Studies of PET-based Unsaturated Polyester Resin,”
Journal of Advanced Materials, Feb. 2016, Vol. 1, pp. 84-99.
269. Manik C. Biswas, Shaik Jeelani, Vijaya Rangari, Influence of Biobased
Silica/Carbon hybrid nanoparticles on Thermal and Mechanical Properties of
Biodegradable Polymer films, Composites Communications., 4, 43-53, 2017.
270. Tiimob, Boniface; Mwinyelle, Gregory; Abdela, Woubit; Samuel, Temesgen;
Jeelani, Shaik; Rangari, Vijaya, “Nano-engineered eggshell-silver tailored co-
polyester polymer blend film with antimicrobial properties" Journal of Agricultural
and Food Chemistry, 65, 9, 1967-1976, 2017 (DOI: 10.1021/acs.jafc.7b00133).
271. Tanjheel Mahdi, Ekramul Islam, Mahesh Hosur, Shaik Jeelani, “Low Velocity Impact
Performance of CFRPs Modified with Carbon Nanotube, Nanoclay and Hybrid
Nanoparticles,” Journal of Reinforced Plastics, Vol. 36 (9), 2017, pp. 696-713.
272. Mahesh Hosur, Tanjheel H. Mahdi, Mohammad E. Islam, S. Jeelani, Mechanical and
“Viscoelastic Properties of Epoxy Nanocomposites Reinforced with Carbon
Nanotubes, Nanoclay and Binary Nanoparticles,” Journal of Reinforced Plastics, Vol.
36 (9), 2017, pp. 667-684.
27
273. Md. Nuruddin, Mahesh Hosur, Raju Gupta, Gaurav Hosur, Alfred Tcherbi-Narteh,
and Shaik Jeelani, “Cellulose Nanofibers-Graphene Nanoplatelets Hybrids
Nanofillers as High-Performance Multifunctional Reinforcements in Epoxy
Composites,” Polymer and Polymer Composites, Vol. 25, Issue 4, 2017, pp. 273-284.
274. Md. Nuruddin, Mahesh Hosur, Tanjheel Mahdi, Shaik Jeelani, “Flexural, Viscoelastic
and Thermal Properties of Epoxy Polymer Composites Modified with Cellulose
Nanofibers Extracted from Wheat Straw,” Sensors & Transducers, 210 (3), 2017, pp.
1-8.
275. Mohanad Idrees, Vijay Rangari, and Shaik Jeelani, 3D Printed Sustainable Biochar-
Recycled PET Composite, ACS Sustainable Chemistry and Engineering- 2018, 6
(11), pp 13940–13948.
276. Mohanad Idrees, Vijay Rangari, and Shaik Jeelani, Sustainable Packaging Waste-
Derived Activated Carbon for Carbon Dioxide Capture, Journal of CO2 Utilization
26, 380-387, 2018.
277. Vitus Apalangya Vijaya Rangari, Shaik Jeelani, Enock Dankyi, Abu Yaya, Samuel
Darko, Rapid microwave synthesis of needle-liked hydroxyapatite nanoparticles via
template directing ball-milled spindle-shaped eggshell particles, Ceramics
International 44 (2018) 7165–7171.
278. Boniface J. Tiimob, Vijaya K. Rangari, Gregory Mwinyelle, Woubit Abdela, Paul G.
Evans, Nicholas Abbott, Temesgen Samuel, Shaik Jeelani, Tough aliphatic-aromatic
copolyester and chicken egg white flexible biopolymer blend with bacteriostatic
effects, Food Packaging and Shelf Life 15 (2018) 9–16.
279. Mahesh Hosur, Tanjheel Mahdi, Shaik Jeelani, “Studies on the Performance of Multi-
Phased Carbon/Epoxy Composites with Nanoclay and Multi-Walled Carbon
Nanotubes,” Multidisciplinary Modeling, Experiments and Design, 1(4), 2018, pp.
255-268.
280. Shatori Meadow, Mahesh Hosur, Yusuf Celikbag, Shaik Jeelani, “Comparative
Analysis on the Epoxidation of Soybean Oil Using Formic and Acetic Acids,”
Polymers and Polymer Composites, Vol. 26, No. 4, 2018, pp. 289-297.
281. Vitus A. Apalangya, Vijaya K. Rangari, Boniface J. Tiimob, Shaik Jeelani, and
Temesgen Samuel, Eggshell Based Nano-Engineered Hydroxyapatite and
Poly(lactic) Acid Electrospun Fibers as Potential Tissue Scaffold, International
Journal of Biomaterials, Volume 2019, Article ID 6762575, 11 pages,
https://doi.org/10.1155/2019/6762575
282. Muhammad A Imam, Shaik Jeelani, and Vijaya K Rangari, Thermal Decomposition
and Mechanical Characterization of PLA and Potato Starch Blend Reinforced with
Bio-waste SiO2”, Journal of Composite Materials-53, 16, 2315-2334 -2019.
283. Manik C.Biswas, Boniface J.Tiimob, WoubitAbdela, ShaikJeelani, and Vijaya
K.Rangari “Nano Silica-Carbon-Silver ternary hybrid induced antimicrobial
composite films for food packaging applications”, Food Packaging and self-life, 19,
2019, 104-113.
284. Farooq Syed, Shaik Zainuddin, Andrea Mills, Mahesh Hosur, Shaik Jeelani,
“Crosslinking and Interfacial Behavior of Carboxylic Functionalized Carbon
nanotube Epon Nanocomposites: A Molecular Dynamics Simulation Approach,”
Spring Nature Applied Sciences, 2019, 1:1423, https://doi.org/10.1007/s42452-019-
1441-0, Published online 10/16/2019.
28
285. Farooq Syed, Shaik Zainuddin, Isaiah Wilson, Mohamed Elafandi, Shaik Jeelani,
“Quantitative Nanomechanical Property Mapping and in situ SPM Imaging of
Polyetherimide Nanocomposites,” Microsc. Microanal. 25 (2), 2019, 704-705,
doi:10.1017/S1431927619004252
286. Farooq Syed, Shaik Zainuddin, Mohamed Elafandi Isaiah Wilson, Haibin Ning, Shaik
Jeelani, “High-Speed Nanomechanical Property Mapping of Polyetherimide/Zinc
Titanate Nanocomposites,” Modern Concepts in Materials Science 1(5), 2019,
MCMS.MS.ID.000522.
287. Zaheeruddin Mohammed Shaik Jeelani, Vijaya Rangari, Effect of Low-Temperature
Plasma Treatment on Surface Modification of Polycaprolactone Pellets and Thermal
Properties of Extruded Filaments, JOM (2020). https://doi.org/10.1007/s11837-020-
04004-y.
Papers Presented at Technical Meetings 1. Jeelani, S. and Bailey, J. A. “Surface Integrity in Machining 18% Nickel
Marging Steel”, Presented at the 1974 Annual Conference of the Society of
Manufacturing Engineering, Dearborn, Michigan, 1974. SME Technical Paper No.
IQ74-185.
2. Bailey, J. A., Jeelani, S. and Becker, S. E. “Surface Integrity in Machining AISI
4130 Steel”, Presented at the ASME Winter Annual Meeting, Nov. 30- Dec. 5, 1975,
Houston, Texas. ASME paper No. 75-WA/Prod –33.
3. Jeelani, S. and Natarajan, R. “Residual Stresses in Machining Using Finite
Element Methods”. Presented at the ASME International Computer Engineering
Conference, August 7-11, 1983, Chicago, Illinois.
4. Jeelani, S. and Natarajan, R. “Determination of Residual Stresses in a Ring Due
to Machining”. Presented at the 1984 ASME International Computers in Engineering
Conference, August 12-17, 1984, Las Vegas, Nevada. Computers in Engineering,
1984 Vol. 2, pp. 773-777.
5. Jeelani, S. and Natarajan, R. “Residual Stress Distribution in 2024-T351
Aluminum Alloy” Presented at the 1985, Boston, Massachusetts. ASME
Conference on Computers in Engineering 1986, Vol. 2.2, pp. 59-63.
6. Jeelani, S. and Biswas, S. “Effect of Curing Conditions on the Strength of
Adhesively Bonded Joints”. Presented at the Annual meeting of the Adhesion
Society, February 1986, Charleston, South Carolina.
7. Jeelani, S. and Mazumdar, P. “Stain Localization in Fatigue and the Physical Basis
of the Coffin-Mason Relationship”. Presented at the Southeastern Conference on
Theoretical and Mechanics (SECTAM), April 1986, Columbia, South Carolina.
8. Jeelani, S. and Pilot, D. “A study of Cumulative Fatigue Damage in AISI 4130
Steel and Titanium 6 A1-4V Alloy”, Presented at the 1986 NASA- HBCU
Forum, Atlanta, Georgia, April 1986.
9. Jeelani, S. and Mazumdar. P. “Plastic Deformation – Its Role in Fatigue Crack
Propagation”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April
1986.
10. Jeelani, S. “Effect of Cutting Speed and Tool Rake Angle on Residual Stress
Distribution in Machining 2024-T351 Aluminum Alloy”. Presented at the 1986
NASA-HBCU Forum, Atlanta, Georgia, April 1986.
11. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue
29
Life of Inconel 718 Allow”. Presented at the 1986 NASA-HBCU Forum, Atlanta,
Georgia, April 1986.
12. Jeelani, S. and Biswas, S. “Effect of Curing Conditions on the Strength of Adhesively
Bonded Joints”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April
1986.
13. Jeelani, S., Natarajan, R. and Hall, Marcus. “Design of a Sub-Sized Fatigue
Specimen”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April
1986.
14. Jeelani, S, Natarajan, R. and Reddy, R. G. “Computer Aided Design of a Sub- Sized
Fatigue Specimen”. Presented at the 1986 ASME International Computers in
Engineering Conference, Chicago, IL, July 20-24, 1986.
15. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue
Life of Inconel 718 Allow”. Presented at the 1986 Fall Meeting of the
Metallurgical Society, October 5-9, 1986 Orlando, FL.
16. Jeelani, S. Natarajan, R. “Residual Stress Distribution in Machining AISI 4130
Steel Using Finite Element Techniques”, Presented at the 1986 ASME International
Computers in Engineering Conference, New York, August 1987.
17. Jeelani, S. “A Sub-Sized Fatigue Specimen”. Presented at the 1987 NASA- HBCU
Forum, Atlanta, Georgia, October 1987.
18. Jeelani, S. “An Investigation of Surface Damage in Fatigue Specimens”. Presented at
the 1987 NASA-HBCU Forum, Atlanta, Georgia, and October 1987.
19. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue
Life of Inconel 718”. Presented at the 1987 NASA-HBCU Forum, Atlanta, GA,
October 1987.
20. Jeelani, S and Pilot, D. “Residual Stress Distribution in AISI 4130 Steel Due to
Machining”. Presented at the 1987 NASA-HBCU Forum, Atlanta, GA, and
October 1987.
21. Jeelani, S. and Biswas S. “A DSC Method to Monitor the Presence of Water
Absorbed by FM7 Epoxy Adhesive”. Presented at the 1987 NASA-HBCU Forum,
Atlanta, GA, October 1987.
22. Jeelani, S. and Jordan, K. “Study of the Integrity of Bond Between Carbon/Phenolic
and Graphite/Phenolic Composites”, Presented at the 1987 NASA-HBCU Forum,
Atlanta, GA, October 1987.
23. Jeelani, S. “Effect of Grinding on the Fatigue Life of Titanium Alloy (5A1-2.55Sn)
Under Dry and Wet Conditions”. Presented at the 1989 NASA- HBCU Forum,
Huntsville, AL, March 1989.
24. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. and Johnson, S. “Characterization of
High Cycle Fatigue Behavior of Titanium 5A1-2.5Sn Alloy”, Presented in the 1991
SEM Spring Conference on Experimental Mechanics, June 10-13 at Milwaukee.
25. Mahfuz, H., Das, P., Baker, D., Jeelani, S. and Johnson, S. “Fatigue and Flexural
Response of Advanced Carbon/Carbon Composites at Room and Elevated
Temperatures, 16th Annual Conference OF The American Ceramic Society on
Composites Materials and Structures, January 12-15, 1992, Cocoa Beach, FL.,
Ceramics Engineering and Science Proceedings, Vol. 1, pp.449-468.
26. Baker, D., Mahfuz, H. and Jeelani, S “Characterization of Refractory Materials for
NASA Fastener Applications, 16th Annual Conference on Composites Materials and
Structures, The American Ceramic Society, January 12-15, 1992, Cocoa Beach, FL.
30
27. Mahfuz, H., Xue, D., Jeelani, S. and Baker, D. M. “Non-Linear Response of 2D
Carbon-Carbon Composites by Layered Shell Elements”, Developments in
Theoretical and Applied Mechanics, Vol. 16, pp. III.1.62-72, Proceedings of the 1992
Southeastern Conference on Theoretical and Applied Mechanics (SECTAM).
28. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Fatigue
Characterization of Advanced Carbon-Carbon Composites”, Proceedings of the 1992
SEM VII International Congress on Experimental Mechanics , Vol. 2, pp. 1368-
1373, 1992.
29. Mahfuz, H., Ingram, C. I. And Jeelani, S. “Compressive Response of
Thermoplastic Composites by Layered Shell Elements”, 1992 ASME Conference on
Computers in Engineering, Vol. 2, pp. 95-101.
30. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite
Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile
Loading”, Proceedings of the International Conference on Advanced Composites,
Sydney, Australia, February, 1993, Vol. 1, pp. 1369-1395.
31. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite
Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile
Loading”, Proceedings of the International Conference on Advanced Composites,
Sydney, Australia, February, 1993, Vol. 1, pp. 1369-1395.
32. Mahfuz, H., Das, P., Xue, D., Krishnagopalan, J. and Jeelani, S. “A combined
Experimental and Finite Study to Predict the Failure Mechanisms in SiC Coated
Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural
Loading”, Proceedings of the International Conference on Composite Materials
(ICCM/9), Madrid, Spain, July 12-16, 1993, Vol. 2, pp. 508-515.
33. Mahfuz, H., Das, P., Xue, D. and Jeelani, S. “Response of SiC Coated
Carbon/Carbon Composites under Flexural Loading- A Combined Experimental and
Finite Element Study”, 3rd International Symposium on Advanced Materials
(ISAM/3), Islamabad, Pakistan, September 20-25, 1993, Vol. 1. pp. 685-695.
34. Sulaiman, A., Yang, J., Jeelani, S. and Mahfuz, H. “Stress and Stability Analysis
of Thick Fiber Reinforced Laminated Composite Plates, Using Finite Element
Method”, 1993 ASME Conference on Computers in Engineering, Vol. 1, pp. 499-
506.
35. Mahfuz, H., Xue, D. and Jeelani, S. “Response of Advanced Carbon/Carbon
Composites under Tensile Loading”, 3rd Pacific Rim Forum on Composite
Materials, Honolulu, Hawaii, November 2-4, 1993.
36. Vaidya. U. K., Mahfuz, H. and Jeelani, S. “Vibration and Ultrasonic
Nondestructive Characterization on Non-Woven and Fabric Reinforced
Carbon/Carbon Composites”, 25th International SAMPE Conference, Philadelphia,
October 26-28, 1993, pp. 347-352.
37. Haque, A., Mahfuz, H., Yu, T. and Jeelani, S. “Effect of Processing Parameters on
Property Changes of Resin Transfer Molded Materials”, 25th International SAMPE
Conference, Philadelphia, October 26-28, 1993, Vol. 25, pp. 305-319.
38. Mahfuz, H. Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S. “Fracture and
Flexural Characterization of Monolithic SiC and SiCw/SiC Composites at Room and
Elevated Temperatures”, 18th Annual Conference, American Ceramic Society
(AcerS), Cocoa Beach, FL, January 9-14, 1994, Vol. 15. No. 4, pp. 219-232.
39. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Structural and Functional
31
Carbon/Carbon Composite after First Carbonization”, 18th Annual Conference of
the American Ceramics Society, Cocoa Beach, FL, January 9-14, 1994, Vol. 15,
No. 4, pp. 591-598.
40. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Novel Hybrid Structural Carbon
Composites”, Proceedings of International Conference on Composites Engineering
(ICCE-1), pp. 316-317, New Orleans, July 23, 1994.
41. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Hybridization Concepts and NDE of
Carbon-Carbon Composites”, 26th International SAMPE Conference, Atlanta, GA,
September 1994. Vol. 26, pp. 483-490.
42. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Development of Nondestructive
Characterization of Non-Woven Carbon Composites”, Proceedings of INDA-
TEC’94 Conference, Vol. 1, pp. 31-37., Baltimore, September 22-24, 1994.
43. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Structural and Functional
Carbon-Carbon Composites”, ASME Winter Annual Meeting, Chicago, IL.
November 6-11, 1994 NCA-Vol. 18, pp.103-109.
44. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Fabric Architectures – Processing – NDE
Relationships in the Development of Carbon-Carbon Composites”, ASME Winter
Annual Meeting, Chicago, IL, November 6-11, 1994.
45. Mahfuz, H., Haque, A., Grant, G. and Jeelani, S. “Fracture Behavior of SiCf/Si3N4
Composites”, First International Conference on Composites Engineering (ICCE/1),
August 28-31, 1994, Vol. 1, pp.538-539.
46. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Hybridization Concepts and NDE of
Carbon-Carbon Composites”, 26th International SAMPE Conference, September
1994, Atlanta, GA, Vol. 26, pp. 483-490.
47. Vaidya. U. K., Mahfuz. H. and Jeelani, S. “NDE of Innovative Hybrid Functional
Carbon Fiber Composite”, First International Conference on Composites
Engineering (ICCE/1), August 28-31, 1994, Vol. 1. pp. 538-539.
48. Mahfuz, H., Haque, A., Yu, D., Robinson, D. and Jeelani, S. “Reverse Fatigue of
Resin Transfer Model Composites”, International Conference on Design and
Manufacturing using Composites (ATMAM ’94), August 10-12, 1994, Vol. 1, pp.23-
32.
49. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K., Krishnagopalan, J. and Jeelani, S.
“Fatigue Damage and Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon
Composites’, International Conference on Design and Manufacturing using
Composites (ATMAM’94), August 10-12, 1994, Vol. 1, pp. 488-492.
50. Vaidya, U. K., Mahfuz, H., Krishnagopalan, J. and Jeelani, S. “Development and
Nondestructive Evaluation of Foam Core Composites”, ASME International
Congress of Mechanical Engineering and Exposition, NCA Vol. 18, DE-Vol. 80,
Materials for Vibration and Noise Control, PP. 103-108, 1994.
51. Mahfuz, H., Mian, A. K. M. A., Vaidya, U. K. and Jeelani, S. “Prediction of Fiber-
Matrix Interface Failure Due to Longitudinal Tensile Loading”, Materials Research
Society (MRS), Fall Meeting, November 27-December 2, 1994, Boston,
Massachusetts, MRS Symposium Proceedings, Vol. 365, pp. 229-236.
52. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Nondestructive
Evaluation/Characterization of Hybrid and Sandwich Carbon/Carbon Composites,
19th Annual Conference, American Ceramic Society (AcerS), Cocoa Beach, FL,
January 8-12, 1995, Vol. 16, No. 4, pp. 289-298.
32
53. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S. “Fatigue Damage
and Residual Strength of Resin Transfer Molded Composites under Reverse Cyclic
Loading”, ASME Conference, Innovative Processing and Characterization of
Composite Materials, 1995, NCA-Vol. 20/ADM-Vol. 21 1, pp. 77-88.
54. Mahfuz. H., Vaidya U. K., Muneeruzzaman, Brown, T. and Jeelani, S. “Room and
High Temperature Fatigue Damage Evaluation of SiCf/Si3N4 Composites”, 19th
Annual Conference, American Ceramic Society, Cocoa Beach, FL, January 8-12,
1995, Vol. 16, No. 4, pp. 351-360.
55. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. “Effect of Short Fiber
Reinforcement Modification and Fabric Architecture on Ultrasonic and Acoustic
Emission Parameters of Carbon/Phenolic and Carbon Composites”, 4th Annual
Research Symposium, American Society of Nondestructive Testing (ASNT) March
21-23, 1995, pp. 244-246.
56. Mahfuz, H., Vaidya, U. K., Muneeruzzaman, M., Brown, T. and Jeelani, S. “Fatigue
Damage Analysis of SiCf/Si3N4 Composites Under Cyclic Loading at Elevated
Temperature, American Ceramic Society (AcerS), Annual Meeting and Exposition,
April 30-May 4, 1995, Cincinnati, OH.
57. Mahfuz. H., Saha, M., Vaidya, U. K. and Jeelani, S. “Impact Damage and Residual
Strength of Resin Infiltrated Toughened Graphite/Epoxy Panel”, 10th International
Conference on Composite Materials (ICCM-10), August 1995, Vancouver, Canada,
Vol. V, pp. 671-678.
58. Mahfuz, H., Saha, M., Vaidya, U. K., Biggs, R. and Jeelani, S. “Prediction of the
Dynamic Response of Toughened Graphite/Epoxy Composite Plates at Low
Velocity Impact-A Numerical Study”, 27th International SAMPE Technical
Conference, October 1995, Albuquerque, New Mexico, Vol. 27, pp. 830-842.
59. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K., Yu, D. and Jeelani, S. “Fatigue
Damage and Residual Strength Evaluation of Resin Transfer Molded (RTM)
Composites under Reversed Cyclic Loading”, International Mechanical Engineering
Congress and Exposition, 1995 Winter Annual Meeting of the ASME, NCA-
VOL.20/AMD-Vol. 211, November 12-17, 1995, San Francisco CA.
60. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. “Novel Processing Techniques
for Low Porosity Carbon-Carbon Composites”, ASME International Congress of
Mechanical Engineering, CA_Vol. 20, pp. 241-248, 1995.
61. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Acoustic-Ultrasonic Characterization of
Carbon-Carbon Composites with Stretch Broken Fabric Architecture", 10th
International Conference on Composite Materials (ICCM-10), August 1995, Vol. V,
pp. 511-526.
62. Mahfuz, H., Mian A. K. M. A., Vaidya, U. K, Brown, T. and Jeelani, S. "Study
of the Interface Behavior of SiCf/Si3N4 Composites Using a 3-D Unit Cell
Model", 4th International Symposium n Advanced Materials (ISAM-4), Islamabad,
Pakistan, Sept. 17-21, 1995, Vol. 1, pp. 667-677.
63. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “ Hybridization Concepts in the
Development and Nondestructive Characterization of Carbon-Carbon Composites”,
Proceedings of the 27th International SAMPE Technical Conference, pp. 453-460,
Albuquerque, New Mexico, October 1995,
64. Vaidya, U. K., Wheeler, R., Mahfuz, H. and Jeelani, S. "Compression Behavior and
NDE of Stiffened Panels", 27th International SAMPE Technical Conference,
33
October 1995, Albuquerque, New Mexico, Vol. 27, pp. 711-721.
65. Mahfuz, H., Vaidya, U. K., Haque, A. and Jeelani, S. “ Experimental and Finite
Element Study of Static Compression and Reverse Fatigue Behavior of Thick
Section Composites”, 6th International Conference on Marine Applications of
Composite Materials (MACM’96), March 19-21, 1996, Cocoa Beach, FL
66. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Effect of Fiber Orientation
on HRS Response of Glass Fiber Reinforced Composites”, 28th International SAMPE
Conference, October 12-15, 1996, Seattle, WA.
67. Vaidya, U. K., Sodah, S. and Jeelani, S. “Toughening and Densification Concepts
Applied to Development of Carbon/Carbon Composites”, ASME International
Congress of Mechanical Engineering, NCA, Vol. 2, pp.34- 40, 1996.
68. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Thick Section
Composites under Static Compression and Cyclic Loading”, 14th World Conference
on Nondestructive Testing, New Delhi, December 6-13, 1996.
69. Vaidya, U. K., Fotedar, K., Mahfuz, H. and Jeelani, S. “Process Related Defects and
High Strain Rate Impact Damage Evaluation of Resin Transfer Molded Composites
Through a comprehensive NDE Approach”, 14th World Conference on
Nondestructive Testing, New Delhi, December 6-13, 1996.
70. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. “Sensor-Property-NDE
Relationship of Polymeric Composites Processed Through Resin Infusion”, Smart
Materials and MEMS, SPIE-96, Vol. 331, pp. 654-667, December 11-14, 1996,
Bangalore, India.
71. Mahfuz, H., Haque, A., Jeelani, S. and Vaidya, U. K. “Fatigue Behavior of
Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMC)- Experimental and
Statistical Analyses”, Symposium on Processing, Characterization, and Modeling of
High Temperature Monolithic and Composite Materials, The 1997 Joint
ASME/ASCE/SES Summer Meeting, June 29-July 02,1997, Northwestern
University, Evanston, IL.
72. 72. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S. "Finite Element
Modeling of the High Strain Rate Behavior of S-2 Glass/Vinyl Ester Composites
Under Compressive Loading," 11th International Conference on Composite
Materials (ICCM-11), Melbourne, Australia, July 1997, Volume V, pp. 819-829.
73. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S. "High Strain Rate
Compression Behavior of Matrix Materials," 5th International Symposium on
Advanced Materials (ISAM - 5), Islamabad, Pakistan 1997, Proceedings: pp. 1-9.
74. 74. Mahfuz. H., Gama, B., Raines, B. and Jeelani, S. "High Strain Rate Behavior of
Woven Composites,” 4th International Conference on Composites Engineering
(ICCE - 4), Hawaii, July 6-11, 1997, Vol. 1, pp. 631-632.
75. Haque, A., Johnson, J., Vaidya, U. K., and Jeelani, S. “Static Compression and
Compression-Compression Fatigue of S2-Glass/Vinyl-Ester Composites," 4th
International Conference on Composites Engineering (ICCE-4), Hawaii, July 6-11,
1997, Vol. 1, pp. 408-409.
76. Vaidya, U. K., Krishnagopalan, J., Haque, A., Mahfuz, H. and Jeelani, S. "Non-
Destructive Characterization and Low Velocity Impact Response of Integral Armor
Components," 4th International Conference on Composites Engineering (ICCE - 4),
Hawaii, July 6-11, 1997, Vol. 1, pp. 1009-1010.
77. Mahfuz, H., Gama, B., Raines, R. and Jeelani, S. "High Strain Rate Behavior of the
34
Component Materials of an Integral Armor," 29th International SAMPE Technical
Conference, October 29 - Nov. 1, 1997, pp. 614-624.
78. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K. and Jeelani, S. "Finite Element
Analysis of Composite Isogrid Cylinders," 29th International SAMPE Technical
Conference, October 29 - Nov. 1, 1997, pp. 577-589.
79. Mahfuz, H., Elton, K., Das, P., Vaidya, U. K. and Jeelani, S. "High Frequency Fatigue
of Continuous Silicon Carbide Fiber Reinforced Silicon Nitride Matrix
Composites," 29th International SAMPE Technical Conference, October 29 - Nov.
1, 1997, pp. 128-141.
80. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. "Manufacturing and Low
Velocity Impact Response of Innovative Sandwich Composites," 29th International
SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 713-724.
81. Vaidya, U. K., Abraham, A., Mahfuz, H. and Jeelani, S. "Manufacturing of
Composite Integral Armor Using Liquid Molding Process," 29th International
SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp, 523-531.
82. Haque, A., Ali, M., Mahfuz, H. Jeelani, S. "Rate Dependent Compressive Response
of S2-Glass/Vinylester Composites," 29th International SAMPE Technical
Conference, October 29 - Nov. 1, 1997, pp. 698-712.
83. 83. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S. "Finite Element
Modeling and Photo elastic Analysis of an Integral Armor under Flexural Loading,"
NCA-Vol. 24, Proceedings of the ASME Noise Control and Acoustic Division,
ASME 97, pp. 235-246, 1997.
84. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S. “Experimental and
Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites”, 19th
Southeastern Conference on Theoretical Applied Mechanics (SECTAM), May 3-5,
1997.Orlando, Florida.
85. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and
Jeelani, S. “ Manufacturing of Thick Section Composites Using Low- Cost Liquid
Molding Processes”, 19th Southeastern Conference on Theoretical and Applied
Mechanics (SECTAM), May 3-5, 1997, Orlando, FL., pp. 139-150.
86. Vaidya, U. K., Mahfuz, H., Jeelani, S. and Motuku, M. “Low Velocity Impact
Response of Polymer Composites with Self-Healing Capability”, Alabama Materials
Research Conference, October 25-26, 1997.
87. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. “Low Velocity Impact
Response of Unconventional Sandwich Composites”, Proceedings of the American
Society of Composites, pp. 562-571, October 6-8, 1997, Dearborn, MI.
88. Krishnagopalan, J., Vaidya, U. K., Abraham, A., Murthy, C. R. L., Fotdar, K.,
Mahfuz, H. and Jeelani, S. “ Manufacturing of Composite Integral Armor Using a
Cost Effective Resin Infusion Process”, American Institute of Chemical Engineers
Meeting, Chicago, Il, September 1997.
89. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “ Fatigue Damage in
Glass/Vinyl Ester Thick Composites”, ASME International Congress of Mechanical
Engineering and Exposition, Proceedings of the ASME Noise Control and Acoustic
Division, NCA-Vol. 24, pp.247-258, 1997.
90. Haque, A., Vaidya, U. K., Ali, M., Fotedar. K., Mahfuz, H. and Jeelani, S. “Effect of
Fiber Orientation on High Strain Rate Behavior of Glass/Epoxy Composites”,
Engineering and Architecture Symposium, PVA&M, February 6-7, 1997, pp. 491-
35
498.
91. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “Fatigue Damage in S2-
Glagg/Vinyl Ester Thick Composites”, NCA-Vol. 24, ASME, 1997, pp.247-257.
92. Vaidya, U., Mahfuz, H., Jeelani, S. and Motuku. M. “Low Velocity of Impact
Response of Polymer Composites with Self Healing Capability”, Alabama Materials
Research Conference, Huntsville, Alabama, October 25-26, 1997.
93. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. “Hybridized Resin Matrix
Approach Applied to Development of Carbon/Carbon Composites”, 39th
AIAA/ASME/ASCE/ASC Conference, Long Beach, CA, April 1998.
94. Vaidya, U. K., Mohan, P., Kamath, M. and Jeelani, S. “Low Velocity Impact
Response of Sandwich Composites With Innovative Cores”, International
Conference of Composites Engineering (ICCE-5), Las Vegas, Nevada, July 1998.
95. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and
Jeelani, S. "Manufacturing of Thick Section Composites Using Low Cost Liquid
Molding Processes," 19th SECTAM Conference on Theoretical and Applied
Mechanics, 1998, pp. 139-150.
96. Mahfuz, H., Lokesh, B., Vaidya, U. and Jeelani, S. “Experimental and Finite
Element Hybrid Stress Analysis of Thick Section S2-Glass Composites”,
Developments in Theoretical and Applied Mechanics, Vol. 9 (1998), pp. 117-128.
97. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K., and Jeelani, S. "Response of
Composite Isogrid Cylinders under Axial Compression," 2nd International
Conference on Composite Science and Technology (ICCST/2), June 9-11, 1998, Vol.
1, pp. 325-331.
98. Vaidya, U. K., Mohan, P., Hosur, M. V. and Jeelani, S. “Low Velocity Impact
Response of Hybrid Sandwich Composites”, 30th International SAMPE Technical
Conference, Vol. 30, pp. 96-104, San Antonio, TX. October 20-24, 1998.
99. Vaidya, U. K., Kumar, P., Hosur, M. V., Kamath, M. V., Mahfuz, H. and Jeelani, S.
“Low Velocity and High Strain Rate Impact Response of Sandwich Composites”,
Proceedings of the 30th International SAMPE Conference, October 20-24, 1998, San
Antonio TX.
100. Mahfuz, H., Rahman, M., Haque, A., Fotedar, E., Vaidya, U. K. and Jeelani, S. “
Buckling Analysis of Composite Isogrid Cylinders Using Finite Element Method”,
International Conference on Advanced Composites, Hurghuda, Egypt, December
1998, pp. 673-682
101. Motuku, M., Janowski, G., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Low Velocity
Impact Response of Vinyl Ester 350 and C50 Neat Resins”, Proceedings of the
ASME, NAC-Vol. 25, pp.283-296, 1998.
102. Vaidya, U. K., Kumar, P, Hosur, M. V.,Kamath, N. V., Mahfuz, H. and Jeelani,
S. “ Low Velocity and High Strain Rate Impact of Pin Reinforced Foam Core
Sandwich Composites”, Proceedings of the Japan-US Conference on Composite
Materials, September 24-25, 1998, pp. 721-729, Baltimore, MD.
103. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S. "Effect of 3D
Reinforcement on the Low-Velocity Impact Response of S2-Glass/Vinyl Ester
Composite Laminates", ASME International Mechanical Engineering Congress and
Exposition, NCA-Vol. 25, pp.303-308, Anaheim, California, November 15-20, 1998.
104. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A. and Jeelani, S. “ Static and
High Strain Rate Compression Testing of Thick Section S2 Glass/Vinyl Ester
36
Composites for Integral Armor Applications”, 1998 ASME International Mechanical
Engineering Congress and Exposition, Materials Division Publication, pp.293-300,
November 15-20, 1998, Anaheim, CA.
105. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A and Jeelani, S. "Compression
Behaviour of Glass/Vinyl Ester Composites for Integral Armor Application"
IMECE-98, International Mechanical Engineering Congress and Exposition,
Anaheim, California, November 15-20, 1998, USA
106. Vaidya, U. K., Hosur, M. V., Kumar, P., Earl, D., Cloyd, M., Mahfuz, H., Haque,
A. and Jeelani, S. “ High Strain Rate Response of Sandwich Composites with
Integrated PARABEAM Core”, International Conference on Advanced Composites,
Hurghuda, Egypt, December 1998, pp. 215-226.
107. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S. "Response of
Fiber and Matrix in Composites under High Strain Rate Loading," Proceedings of
the SEM Annual Conference on Theoretical, experimental and Computational
Mechanics, June 7-9, 1999, Vol. 1, pp. 559-564.
108. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “ Tensile
Behavior of Woven Ceramic Matrix Composites at Room and Elevated
Temperatures: An Experimental and Numerical Study”, Key Engineering Materials,
Vols. 164-165, 1999, pp. 341-344, CSI Series- Publication of the Ceramic Society
of Japan, Vol. 3.
109. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "S-N
Characterization and Cyclic Life Prediction of Thick-Section Composites under
Flexural Loading," Proceedings of the SEM Annual Conference on Theoretical,
Experimental and Computational Mechanics, June 7-9, 1999, Vol. 1, pp. 630- 635.
110. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Life
Prediction of Thick-Section Woven Composites Under Flexural Loading," 6th
International Conference on Composites Engineering (ICCE - 6), June 27 - July 3,
1999, Orlando, Florida, Vol. 1, pp. 537-538.
111. Hosur, M. V., Vaidya, U. K., Gillespie, J. and Jeelani, S. "Ultrasonic Evaluation of
Low-Velocity and Ballistic Impact Damage in S2-Glass Impact damage in S2-
Glass/Vinyl Ester laminates", 26th Annual Review of Progress in Quantitative
Nondestructive Evaluation, July 25-30, 1999 Montreal, Quebec, Canada
112. Vaidya, U. K., Jadhav, N., Hosur, M. V., Mahfuz, H. and Jeelani, S. "Parametric
Dielectric Sensing Studies in Vacuum Assisted Resin Transfer Molding," 6th
International Conference on Composites Engineering (ICCE-6), June 27-July 3,
1999, Orlando, Florida, Vol. 1, pp. 857-858.
113. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A. and Jeelani, S. “Influence of
Specimen Thickness on the High Strain Rate Impact Response of VARTM Woven
S2-Glass/Vinyl Ester Composites”, 6th International Conference on Composites
Engineering (ICCE-6), June 27-July 3, 1999, Orlando, FL.
114. Vaidya, U. K., Abraham, A, Hosur, M. V. and Jeelani, S. “Manufacturing and Impact
Response of S2-Glass/Epoxy Composites Produced by Low-Cost Vacuum Assisted
RTM and Resin Liquid Infiltration”, 1st International SAMPE Automotive
Conference, September 27-29, 1999, Detroit, MI.
115. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S.
“High Strain Rate Impact Response of Infusible Neat Resins and VARTM S2-Glass
Reinforced Fabric Composite”, 1999 SAMPE Technical Conference: Advanced
37
Materials and Processes Preparing for the New Millennium, Vol. 31, pp.89-100,
Covina, CA.
116. Hosur, M. V., Vaidya, U. K., Jeelani, S. Jones, S., Eduljee, R. and Gillespie, J.
“Activity Based Cost Modeling of Liquid Molding Processing Techniques for Thick
Section Composites", American Society for Composites, 14th Technical Conference,
September 27-29, 1999, Dayton, OH, pp. 968-977.
117. Mahfuz, H., Mamun, W., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S.
"High Strain Rate Response of resin Infusion Molded Sandwich
Composites,"1999 ASME International Mechanical Engineering Congress and
Exposition, Nashville, TN, AMD-Vol. 235, Thick Composites for Load Bearing
Structures, pp. 105-112.
118. Haque, A., Rahman, M., Mahfuz, H., Vaidya, U. K. and Jeelani, S “ Durability and
Damage Development in Woven Ceramic Matrix Composites Under Tensile and
Fatigue Loading at Room and Elevated Temperatures”, MD-Vol. 86, Durability and
Damage Tolerance of Composite Materials and Structures, 1999 ASME
International Mechanical Engineering Congress and Exposition, Nashville, TN.
119. Vaidya, U. K., Hosur, M. V., Kumar, P., Mahfuz, H., Haque, A. and Jeelani, S.
“Impact Damage Resistance of Innovative Functional Sandwich Composites”,
Symposium on Recent Developments in the Study of Impacts on Composite
Materials, ASME 1999 Mechanics and Materials Conference, Blacksburg VA, June
27-30, 1999.
120. Vaidya, U. K., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S. “Impact
Response of Innovative Sandwich Composites in Low, Intermediate Velocity and
High Strain Rate Scenarios”, International Conference on Composite Materials
(ICCM-12), July 6-10, 1999, Paris, France.
121. Vaidya, U. K., Jadhav, N., Hosur, M. V., Mahfuz, H. and Jeelani, S. “High Strain
Rate Response of Resins Used in Vacuum Assisted Resin Transfer Molding”,
Proceedings of the International Conference on Composite Materials (ICCM2),
Paris, France, July 5-9, 1999.
122. Vaidya, U. K., Jadhav, N. C., Hosur, M. V., Mahfuz, H., Mohammad, H. and Jeelani,
S. “Parametric Dielectric Sensing Studies in Vaccum Assisted Resin Transfer
Molding”, Proceedings of the International Conference on Composite Materials
(ICCM-12), Paris, France, July 5-9, 1999.
123. Vaidya, U. K., Mohan, P. K., Hosur, M. V., Mahfuz, H., Haque, A. and Jeelani,
S. “ Impact Response of Innovative Sandwich Composites in Low, Intermediate
Velocity and High Strain Rate Scenarios”, Proceedings of the International
Conference on Composite Materials (ICCM-12), Paris, France, July 5-9, 1999.
124. Mahfuz, H., Zaman, K., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S.
"Fatigue Modulus Concept and Life Prediction of Thick-Section S2-
Glass/Vinylester Composites under Flexural Loading," ASME 1999, MD- Vol.
86, AMD-Vol. 232, Durability and Damage Tolerance of Composite Materials and
Structures, pp. 101-106. ‘
125. Hosur, M. V., Vaidya, U. K., Abraham, A., Basappa, G. and Jeelani, S. "Studies on
the influence of through-thickness stitching on low-velocity and high strain response
of S2-Glass/Vinyl Ester Composites", ASME International Mechanical Engineering
Congress and Exposition, AM-9A,Nashville, Tennessee, November, 1999.
126. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M., Kulkarni, R. and Jeelani, S,
38
"Evaluation of Ballistic Impact damage of Fiber Reinforced Plastic Laminates
Bonded by Polycarbonate Face sheet" ASME International Mechanical Engineering
Congress and Exposition, pp. 301-312, Nashville, Tennessee, November, 1999.
127. Mahfuz, H., Pal, A., Rahman, M. and Jeelani, S. "Failure Analysis of Thick
Composite Rings Under Diametric Compression," 12th International Conference on
Composite Materials (ICCM-12), Palais Des Congress, Paris, July 6-10, 1999.
128. Mahfuz, H., Rahman, M., Vaidya, U. K., Haque, A. and Jeelani, S. "Effect of Rib
Geometry on the Buckling Behavior of Composite Isogrid Cylinders," 12th
International Conference on Composite Materials (ICCM-12), Palais Des Congress,
Paris, July 5-9, 1999.
129. Mahfuz, H., Zhu, Y., Haque, A. and Jeelani, S. "Response of Integral Armor under
High Velocity Impact - An Experimental and Finite Element Study," 12th
International Conference on Composite Materials (ICCM-12), Palais Des Congress,
Paris, July 6-10, 1999.
130. Vaidya, U. K., Hosur, M. V., Earl, D., Cloyd, J. M., Rodgers, R. M. and Jeelani, S.
“Impact Response of Integrated Hollow Core Sandwich Composite Panels”, 14th
Technical Conference of American Society for Composites, September 27-29,
1999, Dayton, Ohio, PP. 404-413.
131. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M, Kulkarni, R. and Jeelani,
S. “Evaluation of Ballistic Impact Damage of Fiber Reinforced Plastic Laminates
Bonded by Polycarbonate Face Sheets”, 1999 ASME Mechanical Engineering
Congress and Exposition, Noise and Acoustic Division Publication NCA-Vol. 26,
pp.301-312. Fairfield, NJ.
132. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Haque, A. and Jeelani, S. “Low-
Velocity and Compression After Impact Response of Pin-Reinforced Sandwich
Composites”, 1999 ASME International Mechanical Engineering Congress and
Exposition, Materials Division Publication, MD- Vol. 86, pp 89-100, Fairfield, NJ.
Pp. 1-10.
133. Hosur, M.V., Vaidya, U. K., Abraham, A., Bassappa, G. and Jeelani, S. “Studies on
the Influence of Through the Thickness Stitching on Low Velocity and High Strain
Rate Response of S2-Glass/Vinyl Ester Composites”, 1999 ASME International
Mechanical Engineering Congress and Exposition, Nashville, TN, November 1999.
134. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S. “Studies on the
Influence of 3D Reinforcement of S2-Glass/Vinyl Ester Composites Under Low-
Velocity Impact Fatigue Loading”, 20th Southeastern Conference on Theoretical and
Applied Mechanics, (SECTAM-XX), Callaway Gardens, Pine Mountain, GA, USA,
April 16-18, 2000.
135. Hosur, M. V., Vaidya, U. K., Alexander, J. and Jeelani, S. “High Strain Rate
Response of Affordable Woven Graphite/Epoxy Composite Laminates,” 7th
International Conference on Composites Engineering, ICCE/7, Denver, CO, USA
July 2-8, 2000
136. Vaidya, U. K., Rogers, R., Hosur, M. V., Mahfuz, H. and Jeelani, S.” Influence of
Face Sheet Thickness and Core Density on the Impact Response of Foam Core
Sandwich Composites”, 20th Southeastern Conference on Theoretical and Applied
Mechanics (SECTAM-XX), Calloway Gardens, GA, April 16-18, 2000.
137. Hosur, M. V., Vaidya, U. K., Abraham, A., Caroll, A. and Jeelani, S. "Comparison
of Low-Velocity Impact Response of S2-Glass/SC-15 Epoxy Composites
39
Manufactured by Low-Cost VARIM And RIT Techniques", 15th annual Conference
of American Society of Composites, College Station, TX, USA, Sept. 25-27, 2000.
138. Motuku, M., Vaidya, U. k., Janowski, G. M., Basappa, G. and Jeelani, S. “Effect of
Impact Velocity and Impactor Mass on the Low Velocity Impact Response of
Liquid Molded VE 350 Resin and Fiber Reinforced Plaques”, ASME/IMECE’2000,
Symposium on CAE and Related Innovations for Polymer Processing, MD-Vol 90,
pp. 117-138.
139. Motuku, M., Rogers, R., Jeelani, S. and Vaidya, U. K. “Effect of Foam Core Density
and Face Sheet Thickness on the Low Velocity Impact Response of Foam Core
Sandwich Composites”, ASME/IMECE’2000, Symposium on Vibration and Noise
Control With Multi-Functional Materials, NCA-Vol.27. Pp.435-446.
140. Mahfuz, H, Zhu, Y., Mamun, W., Haque, A. and Jeelani, S. "Failure Analysis of
Hybrid Armor Under High Velocity Impact," ASME 2000, AMD-Vol. 243,
Dynamic Failure in Composite Materials and Structures, pp. 115-127.
141. Mahfuz, H., Islam, S., Carlsson, L., Atkins, M. and Jeelani, S. "Effect of Implanted
Delamination and Core Density on the Buckling Behavior of Sandwich Composites,"
ASME 2000, AMD-Vol. 245, Mechanics of Sandwich Structures, pp. 143-150.
142. Mahfuz, H., Mamun, W. and Jeelani, S. "Effect of Core Density and Implanted
Delamination in the High Strain Rate Response of Foam Core Sandwich
Composites," Sandwich Construction 5, Volume 2, pp. 597-606, 2000.
143. Mahfuz, H., Mamun, W., Vaidya, U. K., Haque, A. and Jeelani, S. “Response of
Foam-Core Sandwich Composites at High strain Rate," Developments in Theoretical
and Applied Mechanics," Vol. 20, pp. 1-7, 2000.
144. Hosur, M. V., Alexander, J, Jeelani, S. and Vaidya, U. K. “High Strain Rate
Compression Response of Carbon/Epoxy Laminate Composites,” ASME
International Mechanical Engineering Congress and Exposition, Orlando, FL,
November, 2000
145. Hosur, M. V., Karim, M. R., and Jeelani, S. “Influence of Stitching On The Low-
Velocity Impact Response Of Woven S2-Glass/SC-15 Epoxy Composites” ASME
International Mechanical Engineering Congress and Exposition, Orlando, FL,
November 2000
146. Hosur, M. V., Alexander, J., Adya, M., Vaidya, U. K. and Jeelani, S. Impact
Response of Affordable Graphite/Epoxy Woven Fabric Composites", 42nd
AIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials
Conference, Seattle, WA, 16-19 April, 2001
147. Hosur, M. V., Adya, M., Vaidya, U. K., Mayer, A. and Jeelani, S “Characterization
of Affordable stitched Plain Weave Carbon/Epoxy Composites Under Impact
Loading”, Thirteenth International Conference on Composite Materials ( ICCM-13),
June 25-29, 2001, Beijing China
148. Motuku, M., Vaidya, U. K., Rogers, R. and Jeelani, S. “Static Compression and
High Strain Rate Impact Response of Foam Core Sandwich Composites”,
International Conference on Composite Materials (ICCM-13), Paper ID-1569,
Beijing, China, June 25-29, 2001.
149. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S. “Off-Axis High Strain
Compression Response of Carbon/Epoxy Laminates”, Proceedings of the 16th
Annual Technical Conference of the American Society for Composites, Blacksburg,
VA, September 9-12, 2001
40
150. Hosur, M. V., Adya, U., Vaidya, U. K. and Jeelani, S. “Impact Resistance of Stitched
Affordable Woven Carbon/Epoxy Composites”, ASME International Mechanical
Engineering Congress and Exposition, New York, NY, November 2001.
151. Mahfuz, H., Mamun, W. and Jeelani, S. "Recent Advances in Understanding the
Response of Composite Materials at Higher Rates of Strain," Keynote Paper, 4th
International Conference on Mechanical Engineering (ICME 2001), Vol. 1., pp.
57-65.
152. Mahfuz, H., Muneeruzzaman, M., Zaman, K., Kulkarni, N. and Jeelani, S. “Response
of Advanced Composites under Cyclic Loading; Recent Advances in Numerical and
Experimental Approaches," Keynote Paper, BSME-ASME International Conference
on Thermal Engineering, 2001, Vol. 1. pp. 120-132.
153. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. “Flexural Fatigue of PVC
Foams”, 2001 ASME International Mechanical Engineering Congress, AMD-Vol.
248, pp. 39-49.
154. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. “High Strain Rate Response of
PVC Foams”, 2001 ASME International Mechanical Engineering Congress, AMD-
Vol.247, pp.93-101
155. Hosur, M. V., Karim, M. R. and Jeelani, S. “Studies on Stitched Woven S2
Glass/Epoxy Laminates Under Low and Ballistic Impact Loading”, Southeastern
Conference on Theoretical and Applied Mechanics, (SECTAM XXI), May 19-21,
2002, Orlando, FL
156. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S “Characterization Of
Affordable Satin Weave Carbon/Epoxy Laminate Composites Under Dynamic
Compression Loading”, Southeastern Conference on Theoretical and Applied
Mechanics (SECTAM XXI), May 19-21, 2002, Orlando, FL
157. Hossain, M. K., Haque, A., Mahfuz, H. and Jeelani, S., “Effects of Moisture and
Temperature on High Strain Rate Behavior of S2-Glass/Vinyl Ester Woven
Composite,” International Mechanical Engineering Congress and Exposition
(ME2001). November 11-16, 2001, New York, New York.
158. Hosur, M. V., Adya, M., Vaidya. U. K. and Jeelani, S., “Response of Stitched Woven
Carbon/Epoxy Composites under High Strain Rate Compression Loading,” SAMPE
Technical Conference, Nov. 4-7, (2002), Baltimore, Maryland.
159. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F. and Jeelani, S., “Innovative
Manufacturing and Stability Analysis of Composite Skin-Stringer Assembly,”
ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002).
160. Mahfuz, H., Chakravarty, U., Saha, M. and Jeelani, S., "Microstructure, Density and
Strain Rate Effects on Sandwich Core Materials," ASME Winter Annual Meeting,
New Orleans, Louisiana, November (2002).
161. Mahfuz, H., Hasan, ABM, Saha, M. and Jeelani, S., "Failure Prediction of Flip
Chip Packages using Finite Element Technique," ASME Winter Annual Meeting,
New Orleans, Louisiana, November (2002), conference.
162. Hosur, M., Myers, D., Vaidya, U. K., and Jeelani, S., "Studies on the Repair of
Ballistic Impact Damaged S2-Glass/Epoxy Laminates,” ASME International
Mechanical Engineering Congress and Exposition, New Orleans, LA, November
(2002).
163. Islam, M., Mahfuz, H., Motuku, M., Saha, M., and Jeelani, S, "Manufacturing and
Analysis of 3-D Woven Sandwich Composites under Compressive Loading with
41
Acoustic Emission Monitoring," ASME Winter Annual Meeting, New Orleans,
Louisiana, November (2002).
164. Hosur, M. V., Waliul Islam, S. M, Jeelani, S., Vaidya, U. K. and Dutta, P. "High
Strain Compression Characterization of Graphite/Epoxy Composites at Room and
Elevated Temperatures," ASME International Mechanical Engineering Congress and
Exposition, New Orleans, LA, November (2002).
165. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "On and Off-
Axis High Strain Rate Compression Characterization of Affordable Woven
Carbon/Epoxy Composites,” 17th Annual Technical Conference of the American
Society for Composites, Purdue, IL, October 20-23, (2002).
166. Kanny, K., Mahfuz, H., Thomas, T., and Jeelani, S.," Static and Dynamic
Characterization of Polymer Foams under Shear Loads," CD Proc. American Society
for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October
(2002), Paper No. 2013.
167. Thomas, T., Mahfuz, H., Kanny, K., Jeelani, S., "High Strain Compression of
Cellular Foam Core Sandwich Composites at Sub-ambient Temperatures,” CD
Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette,
Indiana, 21-23 October (2002), Paper No. 2012.
168. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F., Jeelani, S., and Thomas, M .M.
"Composite Skin-Stringer Assembly: Innovative Manufacturing and Stability
Analysis." CD Proc. American Society for Composites 17th Annual Tech. Conf.,
West Lafayette, Indiana, 21-23 October (2002), Paper No.183.
169. Hosur, M. V., Karim, M. R. and Jeelani, S. "Studies on Stitched Woven S2
Glass/Epoxy Laminates Under Low and Ballistic Impact Loading,” Southeastern
Conference on Theoretical and Applied Mechanics, (SECTAM XXI), May 19-21,
(2002), Orlando, FL.
170. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S "Characterization of
Affordable Satin Weave Carbon/Epoxy Laminate Composites Under Dynamic
Compression Loading,” Southeastern Conference on Theoretical and Applied
Mechanics (SECTAM XXI), May 19-21, (2002), Orlando, FL.
171. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Effects of Loading Frequency
on the Fatigue Behavior of Sandwich Composites,” Developments in Theoretical and
Applied Mechanics, Vol. 11(2002), pp. 285-294.
172. Kulkarni, N., Mahfuz, H., Carlsson, L. and Jeelani, S. "Flexural Fatigue
Characterization of PVC Foam Core Sandwich Composites,” Developments in
Theoretical and Applied Mechanics, Vol. 11(2002), pp.295-304.
173. Mahfuz, H., Ashfaq, A., Rangari, V., and Jeelani, S., "Characterization of Carbon
Nanotube Reinforced Filaments and their Composites," 2003 ASME International
Mechanical Engineering Congress and Exposition, Washington, DC, November 15-
21 (2003).
174. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Dynamic Punch
Shear Characterization of Woven Graphite/Epoxy Laminates,” ASME International
Mechanical Engineering Congress and Exposition, Washington, D. C., November
15-21 (2003).
175. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Evaluation of
Dynamic Punch Shear Properties of Graphite/Epoxy Cross-Ply Laminates,” CD
Proc. American Society for Composites, 18th Annual Tech. Conf., Gainesville,
42
Florida, October 19-22 (2003).
176. Mahfuz, H., Islam, M., Rangari, V. and Jeelani, S., "Processing Synthesis and
Flexural Characterization of Nanophased Polyurethane Foams," American Society
for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003),
Paper 220.
177. Mahfuz, H., Saha, M., Chakravarty, U. and Jeelani, S., "Energy Absorption at
Various Strain Rates by Sandwich Core Materials - Analytical and Experimental
Investigation," American Society for Composites 18th Annual Tech. Conf.,
Gainesville, Florida, October 19-22 (2003), Paper 227.
178. Mahfuz, H., Ashfaq, A., Rangari, V., Jasiuk, I. and Jeelani, S., "Effects of Micron
and Nanosized SiC Particles on the Mechanical Properties of Epoxy
Nanocomposites," American Society for Composites 18th Annual Tech. Conf.,
Gainesville, Florida, October 19-22 (2003), Paper 238.
179. Gorenstein, N. Friedman, A., Mahfuz, H., Ashfaq, A., Rangari, V. and Jeelani, S.,
“Synthesis, Processing, and Mechanical Characterization of Epoxy-Protein
Nanocomposites," American Society for Composites, 18th Annual Tech. Conf.,
Gainesville, Florida, October 19-22 (2003), Paper 240.
180. Saha, M., Mahfuz, H., Joarder, C. and Jeelani, S., "Finite Element Analysis of
Integral Sandwich Tee Joints under Tension," 10th International Conference on
Composites/Nano Engineering, New Orleans, Louisiana, July (2003).
181. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Carbon Nano-whisker
Reinforced Composites: Manufacturing and Characterization," 2003 SEM Annual
Conference on Experimental and Applied Mechanics, Charlotte, NC, preprint 199,
June 2-4, (2003).
182. Hosur, M. V., Vaidya, U. K., Ulen, C., Mayer, A. and Jeelani, S. "Ballistic Impact
Response of Woven Carbon/Epoxy Composites,” 48th International SAMPE
Symposium, May 11-13(2003), Long Beach CA.
183. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S.," Shear Fatigue Behavior of
PVC Foams" 6th International Conference on Sandwich Constructions (ICSC6), Fort
Lauderdale, Florida, Vol. 1, April (2003), pp. 513-521.
184. Mahfuz, H., Islam, S. and Jeelani S., "Flexural Response of Sandwich Composites
with Nanophased Cores," 6th International Conference on Sandwich Constructions
(ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 213-226.
185. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., "Dynamic Compression of
Foam Core Sandwich Composites," 6th International Conference on Sandwich
Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 410-417.
186. Hosur, M. V., Adya, M, Dutta, P. and Jeelani, S. "High Strain Rate Response of
Woven Graphite/Epoxy Composites at Elevated Temperatures,” 44th
AIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials
Conference, Norfolk, VA, April (2003).
187. Salekeen, S., Rahman, M.M., Mahfuz, H., and Jeelani, S., "Long-term Creep and
Creep Rupture Behavior of Woven Ceramic Matrix Composites at Elevated
Temperatures," 2004 ASME International Mechanical Engineering Congress,
Anaheim, California, November 13-19, (2004).
188. Hosur, M. V., John, M. K., Menon, A., Rangari, V. and Jeelani, S. "Studies on the
Microwave Curing and Characterization of SC-15 Epoxy Reinforced with ZnO
Nanoparticles,” 19th Annual Technical Conference of the American Society for
43
Composites, October 17-20(2004), Atlanta, GA.
189. Baseer, M.A. Mahfuz, H., Rangari, V. J., Zhou, Y., and Jeelani, S." Evaluation of
Thermal and Mechanical Properties of Nanophased Carbon Prepregs," American
Society for Composites 19th Annual Tech. Conf., Atlanta, Georgia, October 17-20
(2004), Paper NT-22.
190. Hosur, M. V., Abdullah, M. and Jeelani, S. "Fabrication and Low Velocity Impact
Response of Innovative Foam Filled 3-D Integrated Core Sandwich Composites, 11th
U. S. Japan Conference on Composite Materials, September 9-11 (2004), Yonezawa,
Japan.
191. John, K. M., Hosur, M. V., Rangari, V. and Jeelani, S. "On the Processability of
Nanophased Composites using Microwave,” 22 Southeastern Conference on
Theoretical and Applied Mechanics, SECTAM XXII, August 17(2004), Tuskegee,
Alabama.
192. Hasan M., Mahfuz, H., Rangari, V. and Jeelani, S., "Thermal and Mechanical
Characterization of Nylon-6 Filaments Infused with Nanoparticles, Southeastern
Conference on Theoretical and Applied SECTAM XXII, August 15-17(2004),
Tuskegee, AL.
193. Hosur, M. V., Abdullah, M. and Jeelani, S. "Response of Hollow and Foam Filled
Integrated Core Sandwich Composites under Low Velocity Impact Loading,”
International Conference on Advances in Structural Integrity, July 14-17 (2004),
Bangalore, India.
194. Hosur, M.V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Response of Satin
Weave Graphite Epoxy Composite under Punch Shear Loading at Room and
Elevated Temperatures,” International Conference on Advances in Structural
Integrity, July 14-17(2004), Bangalore, India.
195. Mahfuz, H., Uddin, M., Rangari, V., and Jeelani, S., “High Strain Rate Response of
Sandwich Composites with Nanophased Cores," 2004 SEM X International
Congress on Experimental and Applied Mechanics, Costa Mesa, California, June 7-
10(2004).
196. Hosur, M. V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Punch Shear
Characterization of Twill Weave Graphite/Epoxy Composites,” SAMPE 2004, Long
Beach CA.
197. Uddin, M., Saha, M., Mahfuz, H., Rangari, V. and Jeelani, S., "Strain Rate effects
on Nanophased Polyurethane Foams," SAMPE 2004, May 16-20 (2004), Long
Beach, CA.
198. Salekeen, S., Nana, J., Mahfuz, H., and Jeelani, S., "Thermal Shock Behavior of
Nicalon Fiber SiCN Ceramic Matrix Composites," SAMPE 2004, May 16-20
(2004), Long Beach, CA.
199. Mahfuz, H., Baseer, M., Rangari, V., and Jeelani, S., "Fabrication, Characterization
and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE
May 16-20 (2004), Long Beach, CA.
200. Hosur, M. V., Abdullah, M. and Jeelani, S. "Low Velocity Impact Characterization of
Hollow Integrated Core Sandwich Composites,” SAMPE 2004, May 16-20, (2004),
Long Beach, CA
201. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Enhancement of Thermal and
Mechanical Properties of Woven Carbon/Epoxy Composites through Nanoclay,"
International Conference on Computational and Experimental Engineering and
44
Sciences, ICCES'05, Chennai, India, December 1-6, 2005.
202. Robinson, D., Hosur, M., Mahfuz, H., Rangari, V. K., Jeelani, S., "Optimization of
Ultrasonic Parameters & Manufacturing Process and Characterization of Nano-
phased Low Density Polyurethane Form,” 2005 ASME International Mechanical
Engineering Congress, Orlando, Florida, November 4-10, (2005).
203. Pervin, F.; Zhou, Y.; Rangari, V.K.; Jeelani, S.; "Evaluation of Thermal and
Mechanical Properties of Carbon Nano Fiber Reinforced SC-15 epoxy,” 2005 ASME
International Mechanical Engineering Congress, Orlando, Florida, November 4-
10, (2005).
204. Zhou, Y., Mao, P., Uddin M. F., Jeelani, S.; "High Strain rate Tensile Behavior of
Carbon Fiber Reinforced Aluminum Laminates,” 2005 ASME International
Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).
205. Hosur, M., Mohammed, A., Jeelani, S., "Processing and Performance of
Polyurethane/nanoclay Nanocomposite Foams,” 2005 ASME International
Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).
206. Zhou, Y.; Baseer, M. A.; Mahfuz, H., and Jeelani, S.; "Numerical Simulation on
Tensile Failure process of Unidirectional Carbon Prepregs with Different Matrix,”
Proceedings of the 20th Annual Technical Conference of the American Society for
Composites, September 7-9, (2005), Philadelphia, PA.
207. Pervin, F.; Zhou, Y.; Biswas, M.A.; Rangari, V.K.; Jelanee, S.; "Fabrication and
Characterization of Clay / Epoxy Nanocomposite,” CD Proceeding of 5th Annual
Automotive Composites Conference and Exhibition, September 12-14, (2005),
Tory, MI.
208. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Fabrication and Evaluation on
Nano-Phased Unidirectional Carbon Fiber Reinforced Epoxy,” CD Proceeding of 5th
Annual Automotive Composites Conference and Exhibition, September 12-14,
(2005), Tory, MI.
209. Zhou, Y.; Rangari, V.; Mahfuz, H.; Jeelani, S.; Mallick, P.K.; "Thermal and
Mechanical Behavior of Polypropylene, Talc-filled Polypropylene and
Polypropylene Nanocomposites,” International SAMPE Symposium and Exhibition
(Proceedings), v 50, SAMPE 05: New Horizons for Materials and Processing
Technologies - Conference Proceedings, (2005), p 1655-1657, May 2005, Long
Beach CA.
210. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Experimental Study on the Fatigue
Strength Distribution of T700 Carbon Fiber,” International SAMPE Symposium and
Exhibition (Proceedings), v 50, SAMPE 05: New Horizons for Materials and
Processing Technologies - Conference Proceedings, 2005, p 1625-1634, May
(2005), Long Beach CA.
211. Hosur, M. Mohammed, A., Jeelani, S. "Studies on the Synthesis and Characterization
of Polyurethane/Nanoclay Nanocomposite Foams," 20th American Society for
Composites Annual Technical Conference, September 7-9 (2005), Philadelphia, PA.
212. Hosur, M., Jain, K., Jeelani, S., "Studies On The Low-Velocity Impact Response Of
Carbon/Epoxy Composites Subjected To Environmental Conditioning," SAMPE
2005 Conference, Long Beach CA May 1-5, (2005).
213. Saha, M.C., Nilufar, S., and Jeelani, S., "Studies on Processing and Characterization
of Hollow Glass Microballoons Filled Composites," 2006 ASME International
Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 5-
45
10, 2006.
214. Saha, M.C., Kabir, M.E., and Jeelani, S., "Effect of Nanoparticles on Mode-I
Fracture Toughness," 2006 ASME International Mechanical Engineering Congress
and Exposition, Chicago, Illinois, November 5-10, 2006.
215. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Processing and Low- Velocity
Impact Performance of Nanophased Woven Carbon/Epoxy Composite Laminates,"
U.S Japan Conference on Composite Materials, Dearborn, Michigan, Sept. 20-22,
2006.
216. Robinson, D.C., Hosur M.V., and Jeelani, S., "Process Optimization and
Characterization of Low Density Polyurethane Foam," Proceedings of the 21st
Annual Technical Conference of the American Society for Composites, Dearborn,
MI, Sept. 17-20, 2006.
217. Saha, M.C., Nilufar, S., and Jeelani, S., " Processing and Performance Evaluation of
Syntactic Foams Infused with Nanoclay," 21st Annual Technical Conference of the
American Society for Composites, Dearborn, MI, Sept. 17-20, 2006
218. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Studies on Flexural and Thermal
Response of Hand-layup Carbon/SC-15 Epoxy Composites," SEM Annual
Conference & Exposition on Experimental and Applied Mechanics, St. Louis,
Missouri, June 5- 7, 2006.
219. Saha, M.C., Kabir, M.E., and Jeelani, S., "Core/Skin Debond Fracture Toughness of
S2-Glass/Epoxy Sandwich Composites with Nanophased Polyurethane Foam," SEM
Annual Conference & Exposition on Experimental and Applied Mechanics, Saint
Louis, Missouri, June 4-7, 2006.
220. Saha, M.C., Nilufar, S., and Jeelani, S., "Effect of Strain Rate on Compressive
Behavior of Syntactic Foam," 2006 SEM Annual Conference & Exposition on
Experimental and Applied Mechanics, Saint Louis, Missouri, June 4-7, 2006.
221. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., "Fracture and Fatigue behavior
of carbon nano fiber reinforced epoxy,” Proceedings of the 2006 SEM Annual
Conference and Exposition on Experimental an d A p p l i ed Mechanics. Saint Louis,
Missouri, USA. June 4-7, 2006.
222. Hosur, M.V., Chowdhury, F.H., Mohammed A.A., and Jeelani, S., "Studies on the
Processing and Performance of Nanocomposites for Structural Applications," 23rd
Southeastern Conference in Theoretical and Applied Mechanics Mayagüez, Puerto
Rico, May 21 - 23, 2006.
223. Saha, M.C., Nilufar, S., and Jeelani, S., "Manufacturing and Characterization of
Hollow Spheres Filled Epoxy Composites," Twenty Second Southeastern
Conference on Theoretical and Applied Mechanics, Puerto Rico, May 21-23, 2006.
224. Chowdhury, F.H., Hosur, M.V., and Jeelani, S., "Fabrication and Characterization
of Plain Weave Carbon/Nanoclay-Epoxy Composites," SAMPE 2006, April 30-May
4, 2006, Long Beach, CA.
225. Farhana, F., Zhou, Y., Rangari, V., Jeelani, S.; "Fabrication and characterization of
carbon-CNF-epoxy nanocomposite,” SAMPE 2006, April 30-May 4 2006, Long
Beach CA.
226. Hasan M. M.; Zhou, Y., Mahfuz, H., and Jeelani, S.; "Effect of SiO2 nano- particle
on tensile behavior of Nylon 6 at different strain rate,” SAMPE 2006, April 30-May
4 2006, Long Beach CA.
227. Rangari, V., Fredrick Baker, Tarig A. Hassan and Shaik Jeelani, “Thermal and
46
Mechanical Properties of SiC/SiO2 Epoxy Nanocomposite,” CANCOM-2007,
Winnipeg, Canada.
228. Rangari, V., Tarig A. Hassan, Quentin Mayo and Shaik Jeelani, “Effect of ultrasound
on tungsten oxide nanoparticles and its applications in epoxy nanocomposites,”
ICCM-16-2007, Kyoto, Japan.
229. Rangari, V., M.Yousuf and Shaik Jeelani, “Filament extrusion process, thermal and
mechanical characterization of nylon6-and Silicon carbide coated Silicon nitride
nanoparticle,” Proceedings of International and INCCOM-6 Conference Future
Trends in Composite Materials and Processing, December 12-14, 2007, Indian
Institute of Technology Kanpur, India.
230. Mahesh V. Hosur, Orion Gebremedhin, Shaik Jeelani, “Processing and Performance
Evaluation of Epon 828,” CD Proceedings of the ASME International Mechanical
Engineering Congress and Exposition, 11-15 November 2007, Seattle, WA.
231. Sandrea B. Young, Merlin Theodore, Mahesh V. Hosur, Shaik Jeelani
“Characterization of Amine Functionalized Multi-Walled Carbon Nanotubes Epoxy-
Based Nanocomposites,” CD Proceedings of the SAMPE Fall Meeting, October 29-
November 1, 2007,Cincinnati, OH.
232. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Mechanical and Thermal
Properties of Epoxy based Composites with POSS modified Carbon Nanotubes,”
SAMPE- Oct 29-1 Nov. 2007.
233. Jessie Mayo B. Jr., Mahesh V. Hosur, Shaik Jeelani “Dynamic and Quasi- Static
Stab Resistance of Thermoplastic and Silica-Polyethylene Glycol Gel Infused
Fabrics,” CD Proceedings of the 22nd Annual Technical Conference of the
American Society for Composites, September 17–19, 2007, Seattle, WA.
234. Rodgers, R., Mahfuz, H., Rangari, V., Jeelani, S., Carlsson, L, “Tensile Response
of SiC-Nanoparticles Reinforced Epoxy Composites at Room and Elevated
Temperatures,” 16th Intl. Conference on Composite Materials (ICCM-16), Kyoto,
Japan, July 8-13, 2007, Paper presented and published in the CD Proceeding..
235. 245.Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Process Optimization
and Characterization of Low Density Polyurethane Foam,” CD Proceedings of the
16th International Conference on Composite Materials, July 8-13, 2007, Kyoto,
Japan.
236. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani “Characterization
of Epon 862 Reinforced With Functionalized MCNT's,” CD Proceedings of the 16th
International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan.
237. Mahesh V. Hosur, Aleem A. Mohammed, Shaik Jeelani, “Impact Response of
Nanophased Polyurethane Foam Core Sandwich Composites,” CD Proceedings of
the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto,
Japan.
238. M. V. Hosur, J. B. Mayo Jr., E. Wetzel, and S. Jeelani, “Studies on the Fabrication
and Stab Resistance Characterization of Novel Thermoplastic- Kevlar Composites,”
CD Proceedings of the International Conference on Materials for Advanced
Technologies- ICMAT-2007, July 1-6, 2007, Singapore.
239. 249.O. Gebremedhin, M. V. Hosur, J. Thomas, S. Jeelani, “Processing and
Performance of Nanoclay infused EPON-828,” CD Proceedings of the
SAMPE 2007, June 4-8, 2007, Baltimore, MD.
240. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Decoration of carbon nanotubes
47
with magnetite nanoparticles and its applications in polymer composites,” SAMPE-
2007, Baltimore, June 7.
241. M. Theodore, M. V. Hosur, J. Thomas, S. Jeelani, “Effect of functionalization on the
properties of multi-walled carbon nanotubes,” CD Proceedings of the SAMPE 2007,
June 4-8, 2007, Baltimore, MD.
242. Rangari, V., Tarig A. Hassan and Shaik Jeelani, “Synthesis and Characterization of
Shear Thickening Fluid for Body Armor Applications,” SAMPE-2007, Baltimore,
June 7.
243. Vijaya K. Rangari, Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium
Carbide Infused Phenolic Balsa Foam Nanocomposite,” Plasticity 2007: Alyeska
(Alaska), June 2-6, 2007.
244. M. Theodore, M. V. Hosur, J. Thomas, and S. Jeelani, “Processing and
Characterization of Epon 862 reinforced with functionalized MWCNT’s,” 2007 NIST
Nanotechnology Conference and Trade Show, May 20-24, 2007, Santa Clara,
California, U.S.A.
245. Yuanxin Zhou, Everett White, Shaik Jeelani, “Effect of particle size on the
mechanical properties of polymer matrix nanocomposite,” Nanotech 2007, Santa
Clara, CA, USA, May 22, 2007
246. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani, “Nonlinear constitutive
equation for vapor-grown carbon nanofiber-reinforced SC-15 epoxy at different
strain rate,” ANTECH 2007, Cincinnati, OH, USA, May 8, 2007
247. J. Mayo, M. V. Hosur, E. Wetzel, S. Jeelani, “Resistance of Novel Thermoplastic-
Kevlar Composites to Spike Penetration,” 2nd International Conference on recent
advanced in composite materials, Feb. 20-23, 2007, New-Delhi, India.
248. M. V. Hosur, A. A. Mohammed, S. Jeelani, “Impact Response of the Nanophased
Foam Core Sandwich Composites,” 2nd International Conference on recent advanced
in composite materials, Feb. 20-23, 2007, New-Delhi, India.
249. M. V. Hosur, S. Krishnamoorthy, S. Jeelani, “Processing and Mechanical
Performance of Woven Fabric Carbon/Polyimide Composites,” 2nd International
Conference on recent advanced in composite materials, Feb. 20- 23, 2007, New-
Delhi, India.
250. M. V. Hosur, F. H. Chowdhury, S. Jeelani, “Impact Performance of Nanophased
Woven Fabric Carbon/Epoxy Composite Laminates,” International Conference on
Computational and Experimental Engineering and Sciences, ICCES’07, January 3-
8, 2007, Miami, FL.
251. Mahesh Hosur, Merlin Theodore, Shaik Jeelani, “Effect of Functionalization on the
Morphology, Cure Kinetics and Mechanical Behavior of Thermosetting Polymers,”
Proceedings of the IUTAM-MMSS2008 Symposium on Multifunctional Materials,
Structures and Systems, December 10-12, 2008, Bangalore, India.
252. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and Performance
of Nanophased Braided Carbon/Epoxy Composites,” Proceedings of the 2nd
International Symposium on Advanced Materials and Polymers for Aerospace and
Defense Applications (SAMPADA-2008), December 8-12, 2008, Pune, India.
253. Rangari, V., Mohmmad S. Bhuyan and Shaik eelani, “Microwave processing and
charactering of Epoxy 862/CNT nanocomposites,” SAMPADA-2008, Dec 8-12,
University of Pune, India
254. Rangari, V., M. Yousuf, M. Ghouse and Shaik Jeelani, “Thermal and mechanical
48
characterization of polymer nanocomposites of Si3N4/ Polypropylene fibers,”
ISAMPE National Conference on Composites : INCCOM-7, National Aerospace
Laboratories, Bangalore-17 (NAL’s Golden Jubilee Year 2008)
255. Mahesh V. Hosur, Tamanna Rahman, Sandrea Brundidge-Young, and Shaik Jeelani,
“Mechanical and Thermal Properties of Amine Functionalized Multi- walled Carbon
Nanotubes Epoxy Based Nanocomposite,” Proceedings of the Second International
Conference on Polymer Blends, Composites, IPNs, Membranes, Poly Electrolytes
and Gels, Macro to Nano Scales (ICBC-2008), September 22-24, 2008, Kottayam,
Kerala, India.
256. Mahfuz, H. and Khan, M., “Synthesis and Characterization of Low Density
Polyethylene (LDPE) Reinforced with Functionalized CNTs,” ASME International
Mechanical Engineering Congress and Exposition, October 31 – November 6, 2008,
Boston, Massachusetts, Presented and published in the Conference Proceedings.
257. Md. A. Bhuiyan, Mahesh Hosur, Yaseen Farooq, Shaik Jeelani, “Mechanical and
Thermal Properties of Carbon-Nanofiber Infused Polyurethane Foam,” ASME
IMECE, Nov. 2008, Boston, MA.
258. Mary E. Moore, Mahesh Hosur, Adriane G. Ludwick, and Shaik Jeelani,
“Preparation and Characterization of Layered Silicate Nanocomposites Based on
Resole Phenolic Resins and Brominated Resole Phenolic Copolymer Resins,” CD
Proceedings of the Annual technical Conference of American Society for
Composites, Sept. 9-11, 2008, Memphis, TN.
259. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Characterization
of neat and nanophased epoxy polymers subjected to accelerated aging conditions,”
CD Proceedings of the Annual technical Conference of American Society for
Composites, Sept. 9-11, 2008, Memphis, TN.
260. Tiffany Nelson, Mahesh Hosur, John LaScala, Shaik Jeelani, “Synthesis and
Characterization of Modified Soybean Oil and Methacrylated Fatty Acid Derived
Resins for Sheet Molding Compounds,” CD Proceedings of the Annual technical
Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN.
261. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Durability Study
of Neat/ Nanophased GFRP Composites Under Different Environmental
Conditioning,” CD Proceedings of the Annual technical Conference of American
Society for Composites, Sept. 9-11, 2008, Memphis, TN.
262. B. Dey, Yuanxin Zhou, Mahesh Hosur, Shaik Jeelani, Ashok Kumar, L. D.
Stephenson, “Evaluation of Thermal Effects on Mechanical Properties of Epoxy,
Carbon Fiber and Carbon/epoxy Composite,” CD Proceedings of the Annual
technical Conference of American Society for Composites, Sept. 9-11, 2008,
Memphis, TN.
263. Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Processing and
Performance of Nanoclay Infused Low Density Polyurethane Foams,” CD
Proceedings of the Fall Meeting of the Society for Advancement of Materials and
Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN.
264. Harish M Rao, Jessie Mayo. Jr., Mahesh V. Hosur, and Shaik Jeelani, “Stab
Characterization of Ballistic Fabrics Impregnated With Shear Thickening Fluid,” CD
Proceedings of the Fall Meeting of the Society for Advancement of Materials and
Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN.
265. Rangari, V., Ghouse, M. Mohammal , Shaik Jeelani, Komal Vig, Seyhan Boyoglu,
49
Shree Ram Singh, and Shreekumar Pillai, “Synthesis of Nylon/CNT/Ag fiber for
antimicrobial textile applications,” Force Health Protection - Prevention is the Key,
11th Annual Force Health Protection Conference, Albuquerque Convention Center
Albuquerque, New Mexico 9 - 15 August 2008.
266. Rangari, V., M. Y. Shaik, and S. Jeelani, “Characterization of nanocomposite
materials using electron microscopy,” Microscopy & Microanalysis 2008
Meeting, August 3-7, 2008, Albuquerque Convention Center, Albuquerque, New
Mexico
267. W.D. Jones, V. Rangari, S. Jeelani, “Thermal and Mechanical Response of POSS
coated Nanophased expandable foam core materials,” NSTI, Nanotech June 1-5,
Boston-2008,
268. Rangari, V., S. Dey, S. Jeelani, “In-situ synthesis of Cu nanoparticles on
MWCNTS using Microwave irradiation,” NSTI, Nanotech June 1-5, Boston-2008,
269. N. Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of magnetic nanoparticles
and its applications in drug delivery systems,” NSTI, Nanotech June 1-5, Boston-
2008,
270. Rangari, V., G. M. Mohammad, S. Jeelani, “Fabrication of Nylon nanocomposite
fibers for Antimicrobial Textile applications,” The 2nd International Conference on
Heterogeneous Materials Mechanics (ICHMM-2008) June 3-8, 2008 Huangshan,
China
271. Mahesh Hosur, Farhan Chowdhury, Orion Gebremedhin, Shaik Jeelani, “Recent
Advanced on the Effect of Nanoclay on the Properties of Epoxies and Fiber
Reinforced Polymer Composites,” Second International Conference on
Heterogeneous Materials Mechanics, June 5, 2008, Huangshan, China.
272. Rangari, V., Tarig A. Hassan and Shaik Jeelani, “Synthesis and Mechanical
Properties of Shear Thickening Fluid/Kevlar Composite for Body Armor
Application,” SAMPE '08 Long Beach, Material and Process Innovations: Changing
our World, May 16-21, 2008
273. Y. X. Zhou, B. Dey, M.V. Hosur, S. Jeelani, A. Kumar, and L. D. Stephenson, “Effect
of degraded Matrix on the Tensile Failure Process of Unidirectional Carbon Fiber
Reinforced Epoxy,” Proceedings of the International Conference of Computational
and Experimental Engineering and Sciences, ICCES’08, March 15-21, 2008,
Honolulu, HI.
274. M. V. Hosur, M. M. Islam, S. Jeelani, “Low-Velocity Impact of Braided
Carbon/Epoxy Composites,” Proceedings of the International Conference of
Computational and Experimental Engineering and Sciences, ICCES’08, March
15-21, 2008, Honolulu, HI.
275. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur and Shaik
Jeelani, “Mechanical and Thermal Characterization of CNF-Filled Polyester
Nanophased Composite,” International Conference of Mechanical Engineering,
Dakha, Bangladesh, December 26-28, 2009.
276. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Comparison of Static
and Dynamic Behavior of Nanophased Glass Polyester Composite,” ASME
International Mechanical Engineering Congress and Exposition 2009, November 13-
19, 2009, Lake Buena Vista, Florida.
277. Gregory Strawder, Mahesh Hosur, Jeelani, and Yuanxin Zhou, “Thermal and
Mechanical Studies of Wood Flour Reinforced Polyurethane Composites,” ASMPE
50
Fall Meeting, Wichita, Kansas, October 19-21, 2009.
278. Dangale C. Robinson Meda, Mahesh V. Hosur, and Shaik Jeelani, “Process
Optimization and Characterization of Nanoclay Infused Polyurethane Foam,” The
1st joint American- Canadian International Conference on Composites September
17, 2009.
279. Yuanxin Zhou, M S. Shaik, Shaik Jeelani, Thomas E. Lacy, “Fabrication and
Characterization of Vapor Grown Carbon Nanofiber Reinforced Polyester,”
American Society for Composites 2009 Annual Technical Conference, Newark, DE,
USA, September 15, 2009.
280. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh Hosur, and Shaik Jeelani,
“Comparison of Low Velocity Impact Behavior of Conventional Glass‐Polyester and
CNF‐Filled Glass Polyester Nanophased Composites,” The 1st joint American-
Canadian International Conference on Composites September 16, 2009.
281. S. Zainuddin, M. V. Hosur, R. Barua, and A. V. Anafo, Ashok Kumar and S. Jeelani,
“Effects of Ultraviolet Radiation and Condensation on Static and High Strain
Rate Behavior of Nanophased Glass/ Epoxy Composites,” The 1st joint American-
Canadian International Conference on Composites September 16, 2009.
282. Jessie B. Mayo, Mahesh V. Hosur, and Shaik Jeelani, Eric D. Wetzel “Cut
Behavior of High Performance Fibers,” The 1st joint American- Canadian
International Conference on Composites September 17, 2009.
283. Yuanxin Zhou, M.S. Shaik, Shaik Jeelani, Thomas Lacy, Mark F. Horstemeyer,
“Experimental Study on Thermal and Mechanical Properties of Clay Modified
Carbon Fiber Reinforced epoxy,” American Society for Composites 2008 Annual
Technical Conference, Memphis, TN, USA, September 11, 2008.
284. S. Akanda, Yuanxin Zhou, Shaik Jeelani, “Effect of Structure on Electrical
conductance of Single Wall Carbon Nanotubes,” American Society for Composites
2008 Annual Technical Conference, Memphis, TN, USA, September 11, 2008.
285. N Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of drug loaded iron oxide
nanoparticles,” ICCM-17 17th International Conference on Composite Materials, 27
Jul 2009 - 31 Jul 2009, Edinburgh International Convention Centre (EICC),
Edinburgh, UK
286. T. Nelson, M. V. Hosur, S. Jeelani, “Development of Bio-Based, Hazardous Air
Pollutant Free Sheet Molding Compounds,” International Conference on Composite
Materials, ICCM-17, Edinburgh, UK, July 30, 2009.
287. M. V. Hosur, Md. A Bhuiyan, S. Jeelani, “Low-Velocity Impact Response of
Sandwich Composites with Nanophased Core,” International Conference on
Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009.
288. Rangari, V., Mohammad S. Bhuyan, Shaik Jeelani, “Synthesis, Comparative Study
of Thermal and Microwave cured Epon862/CNFs Nanocomposites,” ICCM-17 17th
h International Conference on Composite Materials 27 Jul 2009 - 31 Jul 2009,
Edinburgh, International, Convention Centre (EICC), Edinburgh, UK
289. S. Zainuddin, M. V. Hosur, A. Kumar, S. Jeelani, “Durability Studies of Nanophased
FRP Composites under synergistic exposure conditions,” International Conference on
Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009.
290. M. V. Hosur, Md. A. Bhuiyan, S. Jeelani, “Impact Response of Nanophased Foam
Core/Braided Face Sheet Sandwich Composites,” 2009 Annual Society for
51
Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009.
291. H. Rao, M. V. Hosur, J. Mayo, S. Burton, S. Jeelani, “Stab Characterization of Hybrid
Ballistic Fabrics,” 2009 Annual Society for Experimental Mechanics Conference,
Albuquerque, NM, June 1-4, 2009.
292. S. Zainuddin, M. V. Hosur, A. Tcherbi-Narteh, Ashok Kumar and S. Jeelani,
“Dynamic Compression Response of Nanophased Composites Subjected to UV
Radiation,” 2009 Annual Society for Experimental Mechanics Conference,
Albuquerque, NM, June 1-4, 2009.
293. T. Nelson, M. Hosur, S. Jeelani, A. Netravali, “Physical and Mechanical
Characterization of Alkali Treated Kenaf Fibers,” SAMPE 2009 Conference,
Baltimore, MD, May 2009.
294. V. Rangari, G. M. Mohammad, S. Jeelani, Y. U.Butenko, V. R. Dhanak, “Fabrication
of Nylon Nano Diamond Coated MWCNT Composite Fibers,” SAMPE ’09
Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009
295. V. Rangari, T. A. Hassan, V. K. Rangari, S. Jeelani, “Synthesis and Characterization
of Calcium Carbonate Nanoparticles Derived from Eggshell,” SAMPE ’09
Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009
296. N. W. Bolden, V. K. Rangari, S. Jeelani, “Synthesis and Characterization of Drug
coated Magnetic Nanoparticles,” SAMPE ’09 Conference and Exhibition,
Baltimore, Maryland, May 18-21, 2009
297. L. Adiani, P. Subbarayan, S.Boyoglu, K. Vig, S. Pillai, V. Rangari, S.R. Singh,
“Silver Coated Carbon Nanotubes Inhibit RSV Infection,” Nanotech Conference &
Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX.
298. .K. Vig, S. Boyoglu, V. Rangari, S. Pillai, S.R. Singh, “Respiratory Syncytial Virus
Inhibition by Gold and Titanium Nanoparticles,” Nanotech Conference & Expo,
George R.Brown Convention Center, May 3-7, 2009, Houston, TX
299. D. Ashour, P. Subbarayan, L. Adiani, S. Boyoglu, G. Mohammad, V. Rangari, S.
Jeelani, S. Ram Singh, S. Pillai, “Antimicrobial properties of silver coated CNT,”
Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009,
Houston, TX,
300. T.A. Hassan, Rangari, V., S. Jeelani, “Synthesis and Characterization of Calcium
Silicate via mechanochemical and Sonochemical method,” Nanotech Conference &
Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX,
301. M. E. Moore, M. Hosur, S. Jeelani, “Effect of Bromine Position on the Thermal
Properties of Brominated Resole Phenolic Resins,” SAMPE 2009 Conference,
Baltimore, MD, May 2009.
302. Yuanxin Zhou, Sajedur Akanda, Mahesh Hosur, Shaik Jeelani, “Atom Scale
Simulation of Contact Resistance between Two Single-Walled Carbon Nanotubes,”
SAMPE 2009 Conference, Baltimore, MD, May 2009.
303. Mahesh V. Hosur, Md. Mazedul Islam, Aziz Ahmed, Shaik Jeelani, “Low Velocity
and High Strain rate Compression Response of Braided Carbon/Epoxy Composites,”
SAMPE 2009 Conference, Baltimore, MD, May 2009.
304. J. Mayo, Jr., A. Lewis, M. V. Hosur, S. Jeelani, “Cut Studies of Brittle and Ductile
Fibers,” SAMPE 2009 Conference, Baltimore, MD, May 2009.
305. M. E. Moore, M. V. Hosur, A. G. Ludwick, and S. Jeelani, “Effect of Bromine
Substitution and Position on the Thermal Stability and Thermal decomposition
Kinetics of Brominated Resole Phenolic Resins,” American Chemical Society
52
Conference 2009, Salt Lake City, UT, March 2009
306. Rangari, V., Mohmmad S. Bhuyan and Shaik Jeelani, “Synthesis, Thermal and
Mechanical characterization of Microwave cured Epoxy/CNTs nanocomposites,”
ICCST/7 –Seventh International Conference on Composite Science and
Technology Jan, 20-22, 2009 - SHARJAH, UNITED ARAB EMIRATES
307. Rangari, V., Sanchita Dey and Shaik Jeelani, Decoration of Ag-Cu nanoparticles on
Multiwalled carbon nanotubes and their applications in polymer composites, MRS,
Spring, April 5-9, 2010, San Francisco, CA.
308. Tarig Hassan, Vijaya K Ragnari and Shaik Jeelani, Synthesis, Fabrication, Thermal
and Mechanical Characterization of Eggshell Based Bio- Nanocomposites,, Gordon
Research Conference – Composites, January,17-22, 2010, Ventura, CA
309. N. Wright Bolden, Rangari, V., S. Jeelani, S. Boyoglu, J. Babu, Synthesis,
Characterization and analysis of iron oxide –paclitaxel microspheres,, Gordon
Research Conference – Composites, January,17-22, 2010, Ventura, CA.
310. Rangari, V., M. Ghouse and Shaik Jeelani, Fabrication and characterization of
high strength nanocomposite single fibers for multifunctional applications., INDO-
US WORKSHOP ON NANOTECHNOLOGY: APPLICATIONS AND
IMPLICATIONS, Indian Institute of Chemical Technology, Hyderabad November
10-12, 2009
311. Tarig Hassan, Ragnari, V., and Shaik Jeelani, Sonochemical Synthesis and
Characterization of Bio-Based Hydroxyapatite Nanoparticles, MRS Fall Meeting,
Nov 30-Dec 4, 2009, Boston, MA
312. Rangari, V., M. Ghouse, Shaik Jeelani, Fabrication and Characterization of High
Strength Antimicrobial Nanocomposite Fibers, ASME International Mechanical
Engineering Congress & Exposition, Nov 13-19, 2009, Lake Buena Visa, FL’
313. Rangari, V., Rahman Samsur, Shaik Jeelani, Growth mechanism of MWCNTs using
nanoparticles as catalysts Joint Canadian-American Society for Composites,
Twenty-fourth Technical Conference, Sept 15-17 2009, University of Delaware,
Delaware
314. Ragnari, V., and Shaik Jeelani, Synthesis of Bio Calcium Carbonate Nanoparticles
by Size Reduction of Eggshell, Tarig Hassan, , MRS Spring Meeting,April,13-
17,2009, San Francisco, CA
315. Sirajus Salekeen, M.G.Kibria Khan, Mahesh Hosur, and Shaik Jeelani, “Ballistic
Properties for Nano-Infused Epoxy Composite/Ceramic Armor,” International
Conference on Composites Science and Technology, Sharjah, UAE, Jan 21, 2009.
316. Mahesh Hosur and Shaik Jeelani, “Polymer Matrix/MWCNT Nanocomposites:
Challenges and Opportunities as Materials for Structural Applications,” “Carbon
Nanotechnology: Potential and Challenges,” with a theme of “Innovations in Carbon
Nanotechnology for the New Century,” 15-17 December 2010, Kanpur, India
(invited).
317. M. K. Hossain, M. W. Dewan, M. Hosur and S. Jeelani, “Thermal and Mechanical
Characterization of Jute-Biopol Nanophased Green Composites,” MRS Fall Meeting
2010, Boston, MA, November 29-December 03, 2010.
318. 330.M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Study of Mechanical
Responses and Thermal Expansion of CNF-modified Polyester Nanocomposites
Processed by Different Mixing Systems,” MRS Fall Meeting 2010 Boston, MA,
November 29-December 03, 2010.
53
319. Mohammad K Hossain, Kazi Al Imran, Mahesh Hosur and Shaik Jeelani, “Effect of
Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy
Composites,” MRS Fall Meeting 2010Boston, MA, November 29-December 03,
2010
320. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, “Static and
High Strain Rate Compression Response of Carbon/Epoxy- Nanoclay Composites
Subjected to Synergistic Effect of UV Radiation and Condensation,” 7th Asian
Australasian Conference on Composite Materials, ACCM-7, 15-18 November, 2010,
Taipei, Taiwan.
321. Shaik Zainuddin, Mahesh Hosur, Harish Rao, Rajib Barua, Shaik Jeelani, Ashok
Kumar, Jonathan Trovillion, “Influence of Non-Functionalized and Functionalized
MWCNTs on Mechanical and Thermal Properties of Epoxy Composites,”
International Mechanical Engineering Congress and Exposition, IMECE 2010,
November 12-18, Vancouver, Canada.
322. M. K. Hossain, M. W. Dewan, M. Hosur and S. Jeelani, “Interfacial Improvement of
Nanopahsed Jute-Based Green Composite by Surface Modification,” ASME
International Mechanical Engineering Congress and Exposition 2010, Vancouver,
British Columbia, Canada, November 12-18, 2010.
323. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Investigation of Carbon
Nanofibers (CNFs) Effects on the Flexural and Thermal Behavior of E-
Glass/Polyester Composites” ASME International Mechanical Engineering Congress
and Exposition 2010. British Columbia, Canada, November 12-18, 2010
324. S. Zainuddin, M. V. Hosur, R. Barua, H. Rao and S. Jeelani, “Influence of amino
functionalized multi-walled carbon nanotube reinforcement on the mechanical and
thermal properties of SC-15 epoxy nanocomposite,” ‘nano Future’, for the 21st
Century, International conference on “Nanotechnology – Materials and Composites
for Frontier Applications,” 14-15, October, 2010, Pune, India (Invited).
325. Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Zainuddin, Shaik Jeelani,
“Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites
Subjected to UV Radiation and Condensation,” International Mechanical
Engineering Congress and Exposition, IMECE 2010, November 12-18, Vancouver,
Canada.
326. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani
“Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites
Subjected to UV Radiation and Condensation,” SAMPE Fall Conference, 11-14
October, 2010, Salt Lake City, UT.
327. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Comparison of High Strain
Rate Compressive Responses of Conventional and CNF-Filled Nanophased E-
Glass/Polyester Composites,” Materials Science & Technology 2010 Conference &
Exhibition. Houston, TX, October 17-21, 2010.
328. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, “Processing and
Characterization of VGCNF Infused Epoxy Nanocomposites Using Three Different
Techniques,” SAMPE Fall Conference, 11-14 October, 2010, Salt Lake City, UT.
329. Mahesh V. Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar,
Jonathan Trovillion, “Processing Optimization and Characterization of MWCNT
infused Epoxy Nanocomposites Using Three Different Techniques,” proceedings of
the American Society for Composites, technical conference, Sept. 19-21, 2010,
54
Dayton, OH.
330. G. Strawder, M. Hosur, S. Jeelani, “Thermal and Mechanical Studies of Wood Flour
Reinforced Polyurethane Composites,” proceedings of the American Society for
Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.
331. M. K. Hossain, M.W. Dewan, M. Hosur, S. Jeelani, “Mechanical and Thermal
Characterization of Modified Jute/Biopol Nanophased Green Composite,”
Proceedings of the American Society for Composites, Technical conference, Sept.
19-21, 2010, Dayton, OH.
332. M. K. Hossain, M. Hosur, S. Jeelani, “Effects of CNF on Compression and Thermal
Responses of E-Glass/Polyester Nanocomposite,” Proceedings of the American
Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.
333. Alfred Tcherbi-Narteh, M.V. Hosur, S. Jeelani, “Effect of UV Radiation on
Mechanical and Thermal Properties of Carbon Fiber Reinforced Polymer
Composites,” Proceedings of the American Society for Composites, technical
conference, Sept. 19-21, 2010, Dayton, OH.
334. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar,
Jonathan Trovillion, Yadira Perez, “Processing and Characterization of Epoxy
Nanocomposites with MWCNTs/CNFs Using Thinky and 3-Roll Shear Mixing
Techniques,” 1st TMS-ABM International Materials Congress, July 26-30, 2010,
Rio de Janeiro, Brazil.
335. Mahesh Hosur, Md. Atiqur Rahman, Shaik Jeelani, “Impact Response of Nanophase
Foam Core Sandwich Composites with Braided Carbon/Epoxy Facings,” 9th
International Conference on Sandwich Structures, ICSS 9, Pasadena, CA, June 14-
16, 2010.
336. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik
Jeelani and Rangari, V., “High Strain Rate Compression Behavior of Conventional
and CNF-Filled-Nanophased Glass/Polyester Composites,”, Proceedings of the
NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).
337. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik
Jeelani and Rangari, V., “Fabrication and Thermo-mechanical Characterization of
CNF-Filled Polyester and E-Glass/Polyester Nanophased Composites,” Proceedings
of the NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).
338. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik
Jeelani and Rangari, V., “High Strain Rate Compression Behavior of Conventional
and CNF-Filled-Nanophased Glass/Polyester Composites,” Proceedings of the
NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).
339. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh V. Hosur and Shaik
Jeelani, “Dynamic Characterization of CNF-Filled E-Glass/Polyester Nanophased
Composite,” Proceedings of the SAMPE ’10, the International SAMPE Symposium
and Exhibition, Seattle, WA, USA, May 17-20 (2010).
340. Y. Zhou, E. White II, M. Hosur, S. Jeelani, “Influence of TiO2 Nanoparticles on
Flexural Properties of Epoxy,” Proceedings of the SAMPE ’10, the International
SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010).
341. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani, “ Low-Velocity Impact Behavior of
Sandwich Composites with Neat and Nanophased Foam Core and Triaxial (0±45°
and 0±60°) Braided Carbon Fiber Face Sheets, International Conference on
Computational & Experimental Engineering and Sciences, ICCES10, Las Vegas,
55
March 29-April 2, 2010.H.
342. Mahfuz, F. Powell, R. Granata, M. Hosur, “Treatment of Carbon Fibers with POSS
and Enhancement in Mechanical Properties of Composites,” Proceedings of the
SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA,
USA, May 17-20 (2010).
343. Rangari, V., Sanchita Dey, Mohammad Ghouse, Shaik Jeelani, Metal and metal
oxide coated CNTs their applications in thermoset and thermoplastic polymers,
,International Conference on Carbon Nanotechnology: Potential and Challenges,
Indian Institute of Technology Kanpur, INDIA, December 15-17, 2010.
344. Rangari, V., T. A. Hassan, S.Jeelani R. K. Rana, Size Reduction of Egg Shell
Particles: The Effect of Ball Milling and Sonication Time Variation, MRS- Fall
meeting Nov 30th 2010, Boston.
345. Rangari, V., A. Perveen and S. Jeelani, Synthesis and Crystal Growth of Iron Oxide
Nanoparticles for Drug Delivery Applications, MRS-Fall meeting Nov 29- 2010,
Boston
346. Rangari, V., M. Ghouse, Seyhan Boyoglu and Shaik Jeelani, Synthesis of ZnO/CNTs
hybrid nanoparticles and their reinforcement in Nylon-6 polymer fibers, ACCM-7
(The 7th Asian-Australian Conference on Composite Materials) Nov 15-18, 2010,
Taipei, Taiwan
347. Tarig A. Hassan, Rangari, V., and Shaik Jeelani, Bio-based Calcium Carbonate
Nanoparticles and their polymer nanocomposites, ICNP, September 24-26, 2010,
Kottayam, Kerala , India.
348. Rangari,V., Sanchita Dey and Shaik Jeelani, Synthesis of Au and Au/Cu alloy
nanoparticles on multiwalled carbon nanotubes by using microwave irradiation, 18th
Congress IFHTSE, July, 26 to 30, 2010, in Rio de Janeiro - RJ - Brazil,
349. Rangari, V., SanchitaDey, and S. Jeelani, Synthesis and microscopic characterization
of metal and metal alloy nanoparticles coated CNTs hybrid composites, M&M
(Microscopy and Microanalysis), August1-5, 2010, Portland, OR.
350. Rangari, V., M. Yousuf, S. Jeelani, Alignment of Si3N4 nanorods in Polypropylene
single fibers, Nanotech June 21-24, 2010, Anaheim, CA.
351. T.A. Hassan, Rangari, V., V. Fallon, Y. Farooq, S. Jeelani, Mechanochemical and
Sonochemical Synthesis of Bio Based Nanoparticles Nanotech June 21-24, 2010,
Anaheim, CA.
352. Rangari, V., Sanchita Dey and S Jeelani, Synthesis and characterization of
Ag/CNTs and their polymer nanocomposites, SAMPE-2010, May 17-20, 2010,
Washington State Convention Center, Seattle, WA.
353. Tarig A. Hassan, Rangari, V., an Shaik Jeelani, Synthesis and characterization of
eggshell/polylite bio nanocomposites, SAMPE-2010, May 17-20, 2010, Washington
State Convention Center, Seattle, WA.
354. Rangari, V., Md. Reza-E-Rabby, Shaik Jeelani, Synthesis and XPS characterization
of SiC/Polyhedral oligomeric sil-sesquioxane, SAMPE-2010, May 17-20, 2010,
Washington State Convention Center, Seattle, WA.
355. Synthesis and Characterization of Bio-based CaCO3/Polylite polymer
nanocomposites, Tarig A. Hassan, Vijay K. Rangari and Shaik Jeelani, ICME-2011,
18-20 December 2011, BUET, Dhaka, Bangladesh.
56
356. Thermal and Mechanical Properties of Microwave curedSiC/ EPOXY
Nanocomposites. V.K.Rangari, Md. Reza-E-Rabby, S. Jeelani, ICCM-18
International Conference of Composite Materials Jeju, Korea Aug 21st-26th 2011.
357. Synthesis and characterization of Hybrid titanium/ calcium carbonate nanoparticles
for Tissue regeneration applications Ashley Heard, Vitus Apalangya, Vijaya K
Rangari and Shaik Jeelani, 241st ACS National Meeting & Exposition, March 27-31,
2011, Anaheim, CA.
358. In-situ growth of CNTs on Woven Carbon Fiber for Advanced Structural
Applications, V.K. Rangari, R. Samsur, S. Jeelani,SAMPE-May 23-26, 2011, Long
Beach, CA.
359. Synthesis and Characterization of Poly(Methyl Methacrylate)/Aerosil Silica
Nanocomposite Thin Films, V.K. Rangari, A. Gaines, S. Jeelani, SAMPE-May 23-
26, 2011, Long Beach, CA.
360. M. V. Hosur, H. Maroju, and S. Jeelani, “Effect of Alkali Treatment on the
Performance of Flax Fiber Reinforced Polyester Composites,” Proceedings of the
International Conference on Mechanical Engineering (ICME 2011), Dhaka,
Bangladesh.
361. M. B. A. Salaam, M. V. Hosur, S. Zainuddin and S. Jeelani, “Characterization of NH2-
MWCNT/Epoxy Nanocomposites Using Two Different Cure Cycles,” Proceedings
of the International Conference on Mechanical Engineering (ICME 2011), Dhaka,
Bangladesh.
362. M. M. Rahman, S. Zainuddin, M. V. Hosur, A. Kumar, J. Trovillion, and S. Jeelani,
“Effect of Enhanced Cross-link Density on Interfacial Shear Strength of E-
Glass/Epoxy Composites Modified by Amino-Functionalized MWCNTs”,
Proceedings of the International Conference on Mechanical Engineering (ICME
2011), Dhaka, Bangladesh.
363. N. Jahan, M. V. Hosur, S. Zainuddin, and S. Jeelani, “Mechanical and Thermal
Characterization of COOH-Functionalized MWCNT Infused Epon 862
Nanocomposites,” Proceedings of the International Conference on Mechanical
Engineering (ICME 2011), Dhaka, Bangladesh.
364. Y. Zhou, M. Hosur, S. Jeelani, and S. Zainuddin, “Effect of clay on tensile, flex and
fatigue behavior of carbon fiber reinforced epoxy,” Proceedings of IMECE 20011,
2011 ASME International Mechanical Engineering Congress and Exposition,
November 11-17, 2011, Denver, Colorado, USA.
365. M. M. Rahman, S. Zainuddin, M. V. Hosur, C. J. Robertson, M.B.A. Salam, Ashok
Kumar, S. Jeelani, “Experimental Investigation of E-Glass/Epoxy Composites
Modified Using NH2 Functionalized Multi-Walled Carbon Nanotubes Through
Sonication and Calendaring Methods,” Proceedings of the SAMPE Fall Conference,
Fort Worth, TX, October 17-20, 2011.
366. M.B.A. Salam, S. Zainuddin, M. V. Hosur, M. M. Rahman, J. Holly Jr., S. Jeelani,
“Mechanical and Thermal Investigation of NH2 Functionalized Multi-Walled Carbon
Nanotube Epoxy Nanocomposites,” Proceedings of the SAMPE Fall Conference, Fort
Worth, TX, October 17-20, 2011.
367. A. Tcherbi-Narteh, M. Hosur, and S. Jeelani, “Mechanical and Thermal Properties of
Carbon/Epoxy Nanoclay Composites Exposed to Synergistic Effect of UV Radiation
and Condensation,” Proceedings of the 18th International Conference on Composite
Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea.
57
368. M. Harika, M. Hosur, S. Jeelani, “Studies on the Fabrication and Characterization of
Flax Fiber/Bio-Composites,” CD Proceedings of the 18th International Conference on
Composite Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea.
369. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Durability Study of
Nanophased Jute-Based Green Composites,” CD proceedings of the Nanotech
Conference and Expo 2011, June 13-16, 2011.
370. M. K. Hossain, C. Okoro, M. V. Hosur, S. Jeelani, and V. Rangari, “Mechanical
Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed by Dual Phase
Dispersion Technique,” CD proceedings of the Nanotech Conference and Expo 2011,
June 13-16, 2011.
371. C.U. Okoro, M.K. Hossain, M. Hosur, S. Jeelani, “Mechanical and Thermal
Characterization of XD- Grade Carbon Nanotube/Epon 862 Processed by Dual Phase
Dispersion Technique,” Proceedings of the SAMPE Conference, 2011, Long Beach,
CA, May 23, 2011.
372. M.K. Hossain, M.W. Dewan, R. Carver, M. Hosur, S. Jeelani, “Thermal and
Mechanical Performance of Jute- Polyester Nanophased Biocomposites,”
Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011.
373. M.K. Hossain, K.A. Imran, M. Hosur, S. Jeelani, “Effect of Seawater on Mechanical
Behavior of Conventional and Nanophased Carbon/Epoxy Composites,” Proceedings
of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011.
374. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on
the Durability of Woven Carbon/Epoxy Composites,” International Conference on
Composites for 21st Century: Current & Future Trends, Jan. 4-7, 2011, Bangalore,
India.
375. Mechanochemical Synthesis of Bio Based Calcium Silicate Nanoparticles for
Biomedical Applications, Vijaya Kumar Rangari, Boniface Tiimob, Shaik Jeelani,
MRS Fall Meeting & Exhibit, November 25 - 30, 2012, Hynes Convention Center,
Boston, MA.
376. Fabrication and Characterization of Poly (methyl methacrylate) /Bio-based
Hydroxyapatite Composites for Scaffold Applications, Vijaya Kumar Rangari,
Temesgen Samuel, Vitus Apalangya, Shaik Jeelani. MRS Fall Meeting & Exhibit,
November 25 - 30, 2012, Hynes Convention Center, Boston, MA.
377. Synthesis and Characterization of Bio-based CaCO3/Bio- plast GS 2189
Nanocomposites, T.A. Hassan, V.K. Rangari, S. Jeelani, Tuskegee University,
SAMPE-Tech 2012. Charleston Convention Center, North Charleston, South
Carolina Conference: October 22-25, 2012.
378. Bio-Based Calcium Carbonate Nanoparticles for Drug Delivery Applications, D.L.
Render, V. Rangari, S. Jeelani, T. Samuel, K. Fadlalla, Tuskegee University,
SAMPE-Tech 2012 Charleston Convention Center, North Charleston, South Carolina
Conference: October 22-25, 2012.
379. Microscopic, Thermal and Mechanical Characterization of Hybrid Nanoparticles of
SiC/SiO2 Infused Polypropylene Composites; James L. Davis, Vijaya K. Rangari and
Shaik Jeelani, Microscopy and Microanalysis, July 29-Aug2nd 2012, Phoenix, AZ.
380. Biobased Calcium Carbonate (CaCO3) Nanoparticles for Drug Delivery Applications
Diane Render, Vijaya Rangari, Khalda Fadlalla, Temesgen Samueland Shaik Jeelani
Biosensors & Bioelectronics-2012 May 14-16 Las Vegas, USA.
58
381. Synthesis of silver nanoparticles in porous activated charcoal for water purification
applications, Vitus Apalangya, Vijaya Rangari Temesgen Samuel and Shaik Jeelani,
Biosensors & Bioelectronics-2012 May 14-16 Las Vegas, USA
382. Profiling and Characterization of Silver, Zinc Oxide and Silver/ Zinc Oxide Hybrid
Nanoparticles for antimicrobial and antifungal properties, Myisha Roberson, Vijaya
Rangari, Clayton Yates, Temesgen Samuel, and Shaik Jeelani, MRS Spring, April 5-
3, 2012, San Francisco, CA.
383. PBT/BRAZILIAN Clay Nanocomposites Prepared by melt intercalation: Effect of
Organophilic clay content and Ionizing Radiation Treatment”. Mariana N. Sartori1,
Maiara S. Ferreira, Francisco R. Valenzuela Díaz, Vijaya K. Rangari, Shaik Jeelani,
Esperidiana A. B. Moura TMS 2014 143rd ANNUAL MEETING & EXHIBITION,
February 16-20, San Diego Convention Center, San Diego, California.
384. M. M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, Ashok Kumar, S. Jeelani,
“Optimization of low velocity impact properties of E-glass/epoxy composites using
plasticizing modifier,” ASME, International Mechanical Engineering Congress and
Exposition, November 9-15, 2012, Houston, TX
385. Mohammad K Hossain, Emory Head, Mahesh Hosur, Shaik Jeelani, Fabrication and
Characterization of Untreated, Alkali Treated, and POSS Treated Jute Fiber
Reinforced–Polylactic Acid Composites, IMECE 2012, Houston, Texas, November
9-14, 2012.
386. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “studies on cure kinetics and
UV radiation of nanoclay modified SC15 epoxy resin used in structural applications,”
SAMPE Fall Conference, October 25, 2012, Charleston, SC.
387. Eldon D. Triggs II, Alfred Tcherbi - Narteh, Mahesh V. Hosur, Shaik Jeelani, “Cure
and Thermomechanical Characterization of Partially Bio-renewable Soybean Based
Polyester Resin and Jute Fiber Laminates,” SAMPE Fall Conference, October 23,
2012, Charleston, SC.
388. M.B.A. Salam, M.V. Hosur, M. Jones, M. Fletcher, S. Jeelani, “Mechanical and
Thermomechanical Behavior of Carbon/Epoxy Composites with Carboxyl
Functionalized Multi-Walled Carbon Nanotubes,” Proceedings of the Nanocon 012,
2nd International Conference on Nanotechnology Innovative Materials, Processes,
Products and Applications, October 18-19, 2012, Pune, India.
389. Eldon D. Triggs II, Mahesh V. Hosur, Shaik Jeelani, “Jute and Flax Based
Biodegradable Composites for High Power Amateur Rocket Structural Applications,”
Proceedings of the American Society for Composites Conference, Sept. 30- Oct. 3,
2012, Arlington, TX.
390. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effects of UV Radiation On
Degradation of Material Properties of Diglycidyl Ether of Bisphenol A (DGEBA)
Epoxy Modified With Different Montmorillonite Nanoclays,” Proceedings of the
American Society for Composites Conference, Sept. 30- Oct. 3, 2012, Arlington, TX.
391. Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, Uday Vaidya, Ashok Kumar,
Jonathan Trovillion, Shaik Jeelani, “Effect of amino-functionalized MWCNTs on
high velocity impact properties of E-glass/epoxy composites,” Proceedings of the
American Society for Composites Conference, Sept. 30-Oct. 3, 2012, Arlington, TX.
392. M.M. Rahman, S. Zainuddin, M.V. Hosur, S. Jeelani, “Enhancement of Energy
Absorption Capability of GFRP Composites using Plasticizing Modifier,” CD
Proceedings of the SAMPE 2012, May 22, Baltimore, MD.
59
393. Mahesh Hosur, Mohammad Hossain, Alfred-Tcherbi Narteh, Md. Kazi Imraan, and
S. Jeelani, “Effect of Nanoclay in Reducing Environmental Degradation of
Carbon/Epoxy Nanocomposites,” Proceedings of the 33rd International Technical
Conference and Forum, SEICO 12, Paris, France, March 2012.
394. Bio-waste derived calcium silicate nanoparticles for tissue regeneration and structural
reinforcement applications. Boniface J. Tiimob, Vijaya K. Rangari, Tsemesgen
Samuel, Shaik Jeelani. Nanobio-summit, Montgomery Al, October 18, 2013.
395. Synthesis and characterization of monocalcium silicate nanoparticles from egg Shell
and the study of their biological and mechanical properties. Boniface J.Tiimob, Vijaya
K. Rangari, Tsemesgen Samuel, Shaik Jeelani Poster presented at science and
technology conference, Montgomery Al, April 5-6, 2013.
396. Preparation and Evaluation of 5-fluorouracil Drug Delivery System with Calcium
Carbonate Nanoparticles, Diane Render, Vijaya Rangari, Temesgen Samuel, Madan
Vig, Jay Ramapuram, Kasturi Pawar, and Shaik Jeelani, EPSCoR National
Conference, Nov. 4-6, 2013, Nashville, TN.
397. Electron-Beam induced cross-linking of extruded Nylon-6 nano-composite fibers:
Effect of irradiation doses and incorporated with Diamond coated Carbon Nano
Tubes and Diamond nano-particles, Muhammad A. Imam, M.G. Gomes,
Eesperidiana.A.B. Moura, Shaik Jeelani and Vijay.K. Rangari, 18th International
Conference on Surface modification materials by ion beams (SMMIB) Sept 15-20,
2013, Kusadasi, Turkey.
398. Effect of Electron-Beam Irradiation on Nylon-6/Diamond Coated CNTS Composite
Fiber, M.A. Imam, S. Jeelani,V.K. Rangari, Tuskegee University; M.G. Gomes,
E.A.B. Moura,Sampe Tec, October, 21-24, 2013 2013, Century II Convention
Center, Wichita, Kansas.
399. Synthesis of metal and metal oxide/CNTs hybrid nanoparticles and their
reinforcement in polymers, V. K Rangari, M. Ghouse, S. Dey, S. Jeelani, 19th ICCM,
July 28th -2nd August, 2013, Montreal, Canada.
400. Development of Drug Delivery System Using Biobased Calcium Carbonate
Nanoparticles, Diane Render, Vijaya Rangari, Temesgen Samuel, Madan Vig, Jay
Ramapuram, Kasturi Pawar, and Shaik Jeelani, Nanotech May 13-16, 2013,
Washington, DC
401. Synthesis of TiO2/CNTs hybrid nanoparticles and their reinforcement in Nylon-6
polymer fibres, Vijaya K. Rangari, Ghouse M Mohammad Shaik Jeelani, Spring 2013
ACS National Meeting (April 7-11, 2013), New Orleans.
402. Fabrication and characterization of biodegradable polymer/eggshell based
hydroxyapatite composite fibers for scaffold applications, V. A. Apalangya, T.
Samuel, V. K. Rangari, S. Jeelani, Emerging Researchers National (ERN) conference,
February 28 - March 2, 2013. Washington D.C April 2013.
403. Mohammad K Hossain, Md. Mahmudur R Chowdhury, Kazi A Imran, Mahmud B
Salam, Mahesh Hosur and Shaik Jeelani, “Durability Study of Low velocity Impact
Responses of Conventional and Nanophased CFRP Composites Exposed to
Seawater,” Proceeding of IMECE2013, ASME International Mechanical Engineering
Congress and Exposition, November 15-21, 2013, San Diego, CA.
404. Shaik Zainuddin, Tauhid Arefin, Mahesh Hosur, Shaik Jeelani, Ashok Kumar,
“Recovery of low-velocity impact properties of glass fiber reinforced composites
through self-healing technique,” Proceeding of IMECE2013, ASME International
60
Mechanical Engineering Congress and Exposition, November 15-21, 2013, San
Diego, CA.
405. Mahesh Hosur, Harika Maroju, Shaik Jeelani, “Influence of Alkali Treatment on
Properties of Flax Fiber Reinforced Polyester Composites,” Proceedings of the ICCM
13: International Conference on Composite Materials, Dubai, UAE, October 22-23,
2013.
406. Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, Reaz A Chowdhury, S.
Jeelani, Peter Gichuhi, “Cellulose Microfibrils Extracted from Wheat Straw: A Novel
Approach,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS.
407. Tanjheel H. Mahdi, Md. E. Islam, Mahesh V. Hosur, Shaik Jeelani, “Low Velocity
Impact Characterization of Carbon Fiber Reinforced Epoxy Composites Modified
with Multi-Walled Carbon Nanotubes, Nanoclay and Hybrid Nanoparticles,” A Novel
Approach,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS.
408. Md Ekramul Islam, Muhammad M. Rahman, Mahesh V. Hosur, Shaik Jeelani, “Kinetics
of Degradation of Epoxy Composites Modified with Reactive Polyol Diluent And
Amino-Functionalized Multi-Walled Carbon Nanotubes,” SAMPE Fall Conference,
October 21-24, 2013, Wichita, KS.
409. S. Zainuddin, T. Arifin, F. Abdalla, M. V. Hosur, J.D. Tyson, S. Jeelani, “Mechanical
and Thermo-Mechanical Properties of Jute/Epoxy, Glass/Epoxy and Hybrid
Jute/Glass/Epoxy Composites,” SAMPE Fall Conference, October 21-24, 2013,
Wichita, KS.
410. Mohammad K. Hossain, Md. Mahmudur R. Chowdhury, Mahmud B. Salam, Mahesh
V. Hosur, Shaik Jeelani, and Nydeia Wright Bolden, “Tensile and Flexural Properties
of Woven Carbon/Epoxy-XD-CNT Nanophased Composites,” SAMPE Fall
Conference, October 21-24, 2013, Wichita, KS.
411. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Effects of Filler Type on the
Behavior of Closed Cell Polyurethane Composite Foams and their Sandwich
Constructions,” Foams® 2013, 11th International Conference on Advances in Foam
Materials & Technology, September 11-12, 2013, Seattle, WA.
412. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs, Shaik Jeelani, “Behavior of
Partially Cured Epoxy Composites Modified With Different Amounts of
Montmorillonite Nanoclay Exposed To UV Radiation,” Proceedings of the American
Society for Composites-Twenty-Eight Technical Conference, September 9-11, 2013,
College Park, PA.
413. Eldon D. Triggs II Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Jeelani, “Thermo-
Mechanical Characterization of Sustainable Composites Made From Bio-Based
Polyester Resins and Nitroxide Mediated Hydroperoxide Initiators,” Proceedings of
the American Society for Composites-Twenty-Eight Technical Conference,
September 9-11, 2013, College Park, PA.
414. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Low-Velocity Impact Response
of Sandwich Composites with FRP Facesheets and Nanoclay-Wood Flour Modified
Polyurethane Foam, The 8th Pacific Rim International Conference on Advanced
Materials and Processing, August 4-9, 2013, Waikoloa, Hawaii.
415. Eldon Triggs, Michael Wells, Mahesh Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani,
“Cure and Thermo-Mechanical Characteristics of Bio-Based Polyester Composites
Using Hydroperoxide Initiators,” 19th International Conference on Composite
Materials, July 28-August 2, 2013, Montreal, Canada.
61
416. Muhammad M Rahman, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, “High
Velocity Impact Response of E-Glass/Epoxy Composites Modified With NH2-
MWCNT,” 19th International Conference on Composite Materials, July 28-August 2,
2013, Montreal, Canada
417. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Effects of Nanoclays and Wood
Flour on the Performance of Polyurethane Foams,” 19th International Conference on
Composite Materials, July 28-August 2, 2013, Montreal, Canada.
418. A. Tcherbi-Narteh, M. Hosur, E. Triggs, S. Jeelani, “Thermal and Viscoelastic
Properties of SC-15 Epoxy Resin Composites Modified With Montmorillonite
Nanoclay Exposed To UV Radiation,” 19th International Conference on Composite
Materials, July 28-August 2, 2013, Montreal, Canada.
419. M Hosur, H Maroju, S Jeelani, “Comparative Studies on the Mechanical and Thermo-
Mechanical Performance of Flax Fiber Reinforced Polyester and Polyester-
Biopolymer Blend Resins,” Advanced Materials Research, August 2013, 747, 399-
402, edited by Narongrit Sombatsompop, Debes Bhattacharyya and Karen Hoi-Yan
Cheung, The 4th International Conference on Multi-Functional Materials and
Structures (MFMS 2013), July 14-17, 2013, Bangkok, Thailand.
420. Nusrat Jahan, Mahesh Hosur, Shaik Jeelani, “Low-Velocity Impact of Woven
Carbon/Epoxy Composites with MWCNTs,” 54th AIAA/ASME/ASCE/AHS/ ASC
Structures, Structural Dynamics, and Materials Conference, 7-11, April 2013, Boston,
MA
421. Influence of eggshell nanopowder on the tomato plant absorption of calcium toward
mitigating blossom end rot problem. Lashachiah Parks and Desmond G. Mortley,
Boniface J. Tiimob, Vijaya K. Rangari, Shaik Jeelani, George Washington Carver
Lecture Series, Tuskegee AL, 30th October, 2014.
422. Effect of eggshell nanopowder on the thermal and mechanical properties of eco-
friendly polymer matrix. Boniface J. Tiimob, Vijaya K. Rangari and Shaik Jeelani.
Nanobio Summit. The University of Alabama, Tuscaloosa AL, 23-24th October 2014.
423. Effects of the incorporation of clay on properties of the biodegradable
copolyester/PLA flexible film. Andressa Alves da Silva, Valquiria A. Silva, Boniface
Tiimob, Vijaya K. Rangari, Shaik Jeelani, Francisco R. Valenzuela-Diaz, Esperidiana
A. B. Moura, Technical contribution to the 69th ABM International Annual Congress,
Sao Paulo Brazil, 21-25th July, 2014.
424. Studies on PBT/Brazilian clay nanocomposites by melt-intercalation process -
synthesis and characterization. Andressa A. Silva, Roberta A. Lima, Boniface
Tiimob, Shaik Jeelani, Vijaya K. Rangari, Francisco R. V. Díaz, Esperidiana A. B.
Moura. Pan American Materials Conference, Sao Paulo Brazil 21-25th July 2014.
425. Graphene/Ag Hybrid Nanoparticles for Multifunctional Composite Applications with
Graphene Layered Carbon Fiber, Chinedu Okoro ,Vijaya Rangari ,Shaik Jeelani,
MRS-sprin April 21-25th 2014, San Francisco, California.
426. Effects of green calcium carbonate addition on mechanical and morphological
properties of flexible films based on biodegradable polymer” Alexandra A. R. Silva;
Valquiria A. Silva; Vijaya K. Rangari, Shaik Jeelani, Rene R. Oliveira, Francisco R.
Valenzuela-Diaz, Esperidiana A. B. Moura TMS 2014 143rd ANNUAL MEETING
& EXHIBITION, February 16-20, San Diego Convention Center, San Diego,
California.
62
427. Vijaya Rangari, Shaik Jeelani, Design, synthesis of nanoparticles and fabrication of
polymer nanocomposites, PACIFICHEM, 2015, Dec 15-20, Honolulu, Hawaii.
428. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V. Hosur, Shaik Jeelani,
"Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with
Nanoclay and Carbon Nanotubes," 6th BSME International Conference on Thermal
Engineering (ICTE 2014), 19-21 December, 2014, Dhaka, Bangladesh.
429. Md. Nuruddin, Mahesh Hosur, Eldon Triggs, Shaik Jeelani, “Comparative Study of
Properties of Cellulose Nanofibers from Wheat Straw Obtained by Chemical and
Chemi-Mechanical Treatments,” ASME International Mechanical Engineering
Congress & Exposition, November 14-20, 2014, Montreal, Canada.
430. Peter Owuor, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Durability
Studies of Hybrid Composite of E-Glass/Carbon Fibers in Different Solvents for
Bridge Deck Panel Application,” ASME International Mechanical Engineering
Congress & Exposition, November 14-20, 2014, Montreal, Canada.
431. T. H. Mahdi, M. E. Islam, M. V. Hosur, Alfred Tcherbi-Narteh, S. Jeelani,
“Characterization of Mechanical and Viscoelastic Properties of SC-15 Epoxy
Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes, Nanoclay and
Binary Nanoparticles," ASME International Mechanical Engineering Congress &
Exposition, November 14-20, 2014, Montreal, Canada.
432. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V Hosur, Alfred Tcherbi-Narteh,
Shaik Jeelani, “Low Velocity Impact Characterization of Nanoclay and MWCNTs
Binary Nanoparticles modified Carbon/Epoxy Composites Subjected to Marine
Environmental Conditioning,” ASME International Mechanical Engineering
Congress & Exposition, November 14-20, 2014, Montreal, Canada.
433. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, “Characterization of Mechanical
and Viscoelastic Properties of Carbon Fiber Reinforced Epoxy Composites Modified
with Multi-walled Carbon Nanotubes, Nanoclay and Hybrid Nanoparticles,”
Composites and Advanced Materials Expo (CAMX), Orlando, FL October 13-16,
2014.
434. Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effect of
Chemical treatments on Morphology, Crystalline and Thermal properties of Kenaf
Fiber,” Composites and Advanced Materials Expo (CAMX), Orlando, FL October
13-16, 2014.
435. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, “Synergistic Effects of Nanoclay
and MWCNTs on the Performance of Epoxy and Carbon Fiber Reinforced Epoxy
Composites,” Nanotechnology-Smart Materials, Composites, Applications and New
Innovations, 3rd International Conference, NANOCON 014, 14-15, October 2014,
Pune, India
436. Shaik Zainuddin, Mahesh Hosur, Chuckwuma Nweke, David Price, Shaik Jeelani,
Ashok Kumar, “Durability of glass/epoxy nanocomposites subjected to synergistic
elevated temperature and moisture conditions,” American Society for Composites
29th Technical Conference, 16th US-Japan Conference on Composite Materials &
ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La
Jolla, CA USA.
437. Eldon D. Triggs II, Mahesh Hosur, Shaik Jeelani, “Comparative Life Cycle Analysis
of Tung Oil/Jute Fiber Bio-Composites to Synthetic Unsaturated Polyester Resins/E-
glass Composites,” American Society for Composites 29th Technical Conference,
63
16th US-Japan Conference on Composite Materials & ASTM-D30 Meeting,
September 8-10, 2014, University of California San Diego, La Jolla, CA USA.
438. Md. Nuruddin, T. H. Mahdi, M. V. Hosur, S. Jeelani, “Mechanical and Thermal
Properties of Cellulose Nanofibers Reinforced Epoxy Polymer Nanocomposites,”
American Society for Composites 29th Technical Conference, 16th US-Japan
Conference on Composite Materials & ASTM-D30 Meeting, September 8-10, 2014,
University of California San Diego, La Jolla, CA USA.
439. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V Hosur, Alfred Tcherbi-Narteh,
Shaik Jeelani, “Comparison of Low Velocity Impact Properties of MMT, MWCNT
and MMT/MWCNT Hybrid Nanoparticles modified Carbon/Epoxy Composites
Subjected to Marine Environmental Conditioning,” American Society for Composites
29th Technical Conference, 16th US-Japan Conference on Composite Materials &
ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La
Jolla, CA USA.
440. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, "Evaluation of Fatigue Properties
of Carbon Fiber Reinforced Epoxy Composites Modified with Nanoclay," First World
Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-
conductors, Polymers, Alloys, Composites, Nanocomposites, Gels, and Adhesives
(FRACTURE 2014): August 9- 11, 2014 at Mahatma Gandhi University, Kottayam,
Kerala, India.
441. Shaik Zainuddin, Abdullah Fahim, Tauhid Arefin, Mahesh Hosur, Shaik Jeelani,
“Mechanical performance of jute/epoxy, glass/epoxy and hybrid jute/glass/epoxy
composites,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014.
442. Abdullah Fahim, Shaik Zainuddin, Ema K. Masuma, Jeremiah Tyson, Mahesh V.
Hosur, Shaik Jeelani, “Morphological, Thermal and Tensile Properties of Halloysite
Nanotubes Filled Poly Hydroxybutyrate-co-Hydroxyvalerate (PHBV)
Nanocomposites,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014.
443. Shaik Zainuddin, Masuma Ema, Price David, Mahesh Hosur, Shaik Jeelani, “Flexure,
Thermomechanical and Thermal Properties of Epon Composites Using Bentonite
Nanoclay,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014.
444. Boniface Tiimob, Vijaya Rangari, Shaik Jeelani, Lashachiah Parks, Desmond George
Mortley. Influence of Eggshell Nanopowder on Calcium Uptake in Tomato. American
Society of Horticulture Science (ASHA), New Orleans LA, 6th
August, 2015.
445. Synthesis of Graphenenanoplates from organoclay templates and their reinforcement
in thermoset polymer, Vijaya K Rangari, Emanuel Akugre, and Shaik Jeelani, ICCM-
20 July 19-24, 2015, Copenhegan, Denmark.
446. Investigation on Mechanical and Thermal Behaviours of Copolyester/pla blend
reinforced with TiO2 nanoparticle, Roberta Lima, Andressa Silva, Vijaya Rangari,
Shaik Jeelani , Esperidiana Moura, 2015 TMS Annual Meeting & Exhibition, March
15-19 2015, Walt Disney world Orelando, Fl, USA.
447. Development of functional nanomaterials from waste avian eggshells. Boniface J.
Tiimob, Vijaya K. Rangari, and Shaik Jeelani. Emerging Researchers National
Conference, Washington DC, 19-21st February 2015.
448. Aliphatic-aromatic copolyester/PLA biodegradable binary polymer blends for
potential packaging applications. Boniface J. Tiimob, Vijaya K. Rangari and Shaik
Jeelani, Science and technology open house, Montgomery AL, 30-31th January 2015.
64
449. Shatori Meadows, Alfred Tcherbi-Narteh, Mahesh Hosur, and Shaik Jeelani, “Kinetic
Analysis of Different Peroxide Initiators on the Cure Behavior of Biobased and
Recycled Unsaturated Polyester Envirez Resins,” Proceedings of The Composites and
Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA.
450. Md Nuruddin, Raju Gupta, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani,
“Preparation of poly(L-lactide )/Poly(methyl methacrylate) polymer blend: A Novel
Approach,” Proceedings of The Composites and Advanced Materials Expo (CAMX
2015), October 26-29, 2015, Dallas, Texas, USA.
451. Md Nuruddin, James McKee, Alfred Tcherbi-Narteh, Raju Gupta, Mahesh Hosur,
Shaik Jeelani, “Flexure and Impact Behavior of E-glass/Carbon Hybrid Fiber
Reinforced Epoxy Polymer Composite,” Proceedings of The Composites and
Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA.
452. Dereca Hubbard, Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, and Shaik
Jeelani, “Synthesis and Characterization of Novel Phenolic Resin System Based on
Lignin Extracted From Different Biomass Resources,” Proceedings of The
Composites and Advanced Materials Expo (CAMX 2015), October 26-29, 2015,
Dallas, Texas, USA.
453. Mahesh Hosur, Tanjheel Mahdi, Md. Ekramul Islam, Alfred Tcerbi-Narteh, Shaik
Jeelani, “Fabrication and Performance of Carbon/Epoxy Composites With Hybrid of
Nanoclay and MWCNTS,” 20th International Conference on Composites Materials
(ICCM-20), Copenhagen, Denmark, July 22, 2015.
454. Alfred Tcherbi-Narteh, Md. Nuruddin, Mahesh Hosur, Raju Gupta, Allyson
Lattimore, and Shaik Jeelani “Influence of Montmorillonite Nanoclay, Graphene
Nanoplatelets and Combined Nanoclay/Graphene Hybrid on Properties of Epoxy
Composite,” 20th International Conference on Composites Materials (ICCM-20),
Copenhagen, Denmark, July 23, 2015.
455. Nano-engineered eggshell toughened polylactic acid/aliphatic-aromatic copolyester
flexible polymer blend, Boniface Tiimob, Vijaya Rangari, and Shaik Jeelani, ACS
251th meeting at San Diego, CA, March 14th-18th. 2016.
456. Vijay Rangari, Vitus Apalangya, Shaik Jeelani; Tiimob Boniface, Samuel Temesgen,
Fabrication of Polymer/Bio-based Hydroxyapatite Composite Electrospunn Fibers
for Scaffold Applications, (Oral)TMS-2016, Feb 14-18, 145th Annual Meeting and
Exhibition at Nashville TN,
457. Boniface J.Tiimob, Shaik Jeelani and Vijaya K. Rangari, Nano Eggshell Toughened
Polylactic Acid/Aliphatic‐aromatic Copolyester Flexible Biodegradable Blend. ERN-
Conference in STEM, Washington DC, 25-27th
February 2016.
458. Boniface J.Tiimob, Shaik Jeelani and Vijaya K. Rangari. Effect of reinforcement of
eggshell based nanopowder on biodegradable flexible polymer blends. Emerging
Researchers National Conference, Washington DC, 25-27th
February 2016.
459. Azizi Turner, Boniface J. Tiimob, Shaik Jeelani, Vijaya K. Rangari. Nano eggshell
tailored polyurethane foam composites for structural material design. Emerging
Researchers National Conference, Washington DC, 25-27th, February 2016.
460. Marilyn H. Creer, Boniface Tiimob, Shaik Jeelani, Vijaya Rangari. Effect of bagasse
filler nanoparticles on the thermomechanical properties of bio-based epoxy system.
Emerging Researchers National Conference, Washington DC, 19-21st February 2015;
25-27th, 2016.
65
461. Farooq Syed, Shaik Zainuddin, Amari carter, Mackenzie Matthews, Mahesh Hosur,
Shaik Jeelani, “Single-walled carbon nanotube added epon 862 nanocomposites:
Investigating the crosslinking behavior and interfacial properties through molecular
dynamic simulations,” SAMPE, Long Beach, CA, May 23-26, 2016.
462. Shaik Zainuddin, Abdullah Fahim, Shaik Shoieb, Mahesh V. Hosur, Dawen Li,
Brittany Terry, Shaik Jeelani, “Jute nanobiocomposites reinforced with grafted
halloysite nanotubes added PHBV polymer,” SAMPE, Long Beach, CA, May 23-26,
2016.
463. Chukwuma E. Nweke, Shaik Zainuddin, Mahesh Hosur, Vincent Hollowman, Shaik
Jeelani, “Processing and characterization of CNT/core shell siloxane modified high
temperature bismaleimide polymeric composites,” SAMPE, Long Beach, CA, May
23-26, 2016.
464. Vertonica Powell-Rose, Mahesh Hosur, Shaik Jeelani, Influence of Nanoclay on
Curing, Mechanical and Thermal Properties of Bio-Based Epoxy Resin System,
CAMX, The Composites and Advanced materials Expo, September 26-29, 2016,
Anaheim, CA.
465. M. Hosur, T. Mahdi, E. Islam, S. Jeelani, Flexural, thermomechanical and low-
velocity impact studies of CFRP composites with nanoclay and multiwalled carbon
nanotubes, American Society for Composites 31st Technical Conference and ASTM
Committee D30 Meeting, September 19-22, 2016, Williamsburg, VA.
466. Conversion of Egg and Seashell Waste into a Printable Biomaterial for Dental Tissue
Engineering Scaffolds, V. Hembrick-Holloman, S. Jeelani
and V. Rangari Nov 9-10,
2017, 5th Nanobiosumit-2017.
467. Fabrication of Polycarbonate-Silica Polymer Nanocomposites Layer by Layer
Through 3D Printing, Chibu O. Umerah, Mohanad Idrees, Vijaya K. Rangari, Shaik
Jeelani, Nov 9-10, 2017,5th Nanobiosumit-2017.
468. Eggshell-silver nanoparticles reinforcement in polymer films and their applications,
Boniface J. Tiimob, Shaik Jeelani, Vijaya K. Rangari, ICCM-21, Xian, China, August
20th -26th 2017.
469. Highly Porous Carbon Nanoparticles from Recycled Waste Papers for Water
Filtration applications, Manik Biswas, Vijay Rangari and Shaik Jeelani, SAMPE–
Seattle May 22nd -25th, 2017.
470. Synthesis of Porous Carbon from waste Peanut Hull by pyrolysis, Alayna Huckleby,
Shaik Jeelani and Vijaya Rangari, 2017 Emerging Researchers National
(ERN) Conference in STEM on March 2-4, 2017.
471. Conversion of Egg and Sea Shell Waste into a Valuable Nanomaterial for Tissue
Engineering, Vincent Hembrick-Holloman, Vijay Rangari, Shaik Jeelani,
2017 Emerging Researchers National (ERN) Conference in STEM on March 2-4,
2017.
472. Studying the Bioactivity of Tissue Engineering Scaffolds Derived from Egg and Sea
Shell Waste Using SEM, EDS, & TEM, V Hembrick-Holloman, VK Rangari, T
Samuel, S Jeelani, Microscopy and Microanalysis 25 (S2), 1058-1059.
473. Shaik Zainuddin, Chukwuma E. Nweke, Mahesh Hosur, Vincent Hollowman, Shaik
Jeelani, “Effect of Core Shell Siloxane/Carbon Nanotubes Modifiers on the
Mechanical and Thermal Performance of Bismaleimide Nanocomposites,” CAMX,
The Composites and Advanced materials Expo, December 11-14, 2017, Orlando, FL.
66
474. Alfred Tcherbi-Narteh, Delroy Watson, Shatori Meadows, Lenore S. Miller, Shavette
Thompson, Mohammad Zaheeruddin, Mahesh Hosur, and Shaik Jeelani,
“Interactions between Different Nanoparticles used as Binary Reinforcements in
Polymer Nanocomposites,” Proceedings of the American Society for Composites
32nd Technical Conference, October 22-25, 2017, West Lafayette, IN.
475. Mahesh Hosur, Md. Nuruddin, Dereca Hubbard, Alfred Tcherbi-Narteh, Shaik
Jeelani, “Extraction of cellulose and lignin from biomass and their use in reinforcing
polymers and synthesis of phenolic resins,” The 21st International Conference on
Composites Materials (ICCM-21), August 20-25, 2017, Xi'an, China.
476. Alfred Tcherbi-Narteh, Delroy Watson, Mohammad Zaheeruddin, Donnell Tobias,
Mahesh Hosur, Shaik Jeelani, “Studies on Nanocomposites Reinforced with
Nanoclay and Graphene Nanoplatelets, and Hybrid Composites with Glass and
Carbon Fabric Reinforcements,” The 21st International Conference on Composites
Materials (ICCM-21), August 20-25, 2017, Xi'an, China.
477. Shatori Meadows, Mahesh Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani,
“Optimization Studies on the Synthesis and Characterization of Bio-based Epoxidized
Soybean Oil (ESBO),” The 21st International Conference on Composites Materials
(ICCM-21), August 20-25, 2017, Xi'an, China.
478. Development of 3D printing of Polycarbonate/Silica polymer Nanocomposites,
Chibu O. Umerah, Mohanad O. Idrees, Shaik Jeelani, Vijaya K. Rangari, SAMPE,
May, 21-24, 2018, Long Beach, CA.
479. Synthesis and characterization of highly porous carbon from waste packaging
material for value added, Vijay Rangari, Mohanad Idrees and Shaik Jeelani, March
11-15, 2018 TMS Annual Meeting & Exhibition, Phoenix, AR.
480. Mahesh Hosur, Tanjheel Mahdi, Ekramul Islam, Shaik Jeelani, “Nanoparticle
incorporation in thermoset polymers to enhance the performance of fiber reinforced
composites,” proceedings of the Nanocon 018, nanotechnology – Applications,
Advances and Innovations, Pune, India, 25-26, October, 2018.
481. Mahesh Hosur, Alfred Tcherbi-Narteh, Delroy Watson, Mohamed Zaheeruddin,
Kristoff McIntosh, Shaik Jeelani, “Polymeric Nanocomposites With Binary
Nanoparticles Reinforcements and Hybrid Composites for Marine Applications,
ECCM 18-18th European Conference on Composite Materials, Athens Greece, 22-
24th June 2018.
482. Alfred Tcherbi-Narteh, Delroy Watson, Zaheeruddin Mohammad, Tobias Donnell,
Mahesh Hosur and Shaik Jeelani, "Properties of Carbon, E-glass and Hybrid E-
glass/Carbon Fiber Reinforced Polymer Composites Exposed to Seawater
Conditioning," SAMPE 2018 Conference and Exhibition, May 21-24, 2018, Long
Beach, CA.
483. Synthesis of Biochar and 3D Printing of Sustainable Biochar Recycled PET
Composite: Vijaya Rangari, Mohanad Idrees, Shaik Jeelani, TMS, March 10-14th
2019, San Antonio, TX.
484. SEM/EDS as a Tool to Investigate Pyrolysis Induced Transformations in Chicken
Feather Fibers, Z Mohammed, S Jeelani, V Rangari, Microscopy and Microanalysis
25 (S2), 1112-1113.
485. Surface Modification of Bio Derived Carbon with Low Temperature Plasma
Treatment for Polymer Composite Filler Applications, Vijaya Rangari, Zaheeruddin
Mohammed, Shaik Jeelani, TMS conference San Diago, Feb 23-27, 2020.
67
Technical Reports
1. “Power Accelerator System for Axial Impact Studies”, Report No. 69-3, February
1969 for the Department for the US Navy Office of Naval Research.No.
N00014-68-0187
2. “Design and Performance of Power Accelerator Systems for Impact Studies”,
Technical Report No. 71-2 for the US Navy Office of Naval Research. No. N00014-
68-0197.
3. “Two State Light-Gas Gun Installation for Hyper-Velocity Impact Studies”, Report
No. 73-3 for the US Navy Office of Naval Research. Ministry of Defense, Contract
No. N00014-0197.
4. “Surface Integrity in the Machining of Certain High Strength Materials Part II
(Measurement of Residual Stress),”
5. Surface and Sub-Surface Damage in the Machining of 18% Nickel Maraging
Steel, 6242Titanium Alloy and Red Brass” For the National Science Foundation,
Grant GH-33761.
6. “Prediction of Cumulative Fatigue Damage”. Report No. TI-NAVY-1 for the
Department of the US Navy, Naval Air Systems Command. Contract No. N00019-
78-0034.
7. “Investigation of Cumulative Fatigue Damage for Selected Materials”, Report No. TI-
NAVY-2 for the Department of the US Navy, Naval Air Systems Command,
Contract No. N00019-80-c-0564.
8. “A Study of Cumulative Fatigue Damage in 2024-T4 Aluminum Alloy”. Report
No. TI-NAVY-3 for the Department of the US Navy, Naval Air Systems Command.
Contract No. N00019-80-c-0564.
9. “A Study of Cumulative Fatigue Damage in 2011-T3 Aluminum Alloy”. Report
No. TI-NAVY-4 for the Department of the US Navy, Naval Air Systems Command.
Contract No. N00019-79-c-0564.
10. “Investigation of Cumulative Fatigue Damage for Selected Materials”, Report No. TI-
NAVY-5 October 1983 for the Department of the US Navy, Naval Air
Systems Command, Contract No. N00019-82-c-0316.
11. “Effect of Cutting Conditions on Fatigue Life of 2024-T351 Aluminum Alloy”,
Report No. TI-NAVY-6 December 1983 for the Department of the US Navy, Naval
Air Systems Command, Contract No. N00019-82-c-0316.
12. “Characterization of High-Cycle Fatigue Behavior of Selected materials (Titanium
6A1-4V and AISI 4130 Steel) for NASA-MSFC, under grant No. NAG 8-20.13.
“Design of a Sub-Sized Fatigue Specimen”, for NASA-MSFC, under grant No.
NAG8-20.
13. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”, for
NASA-MSFC, under Grant No. NGT-01-005-751.
14. “A New Technique of Fatigue Life Prediction”. Report for NASA-MSFC, Under
Grant No. NAG-068, April 1988.
15. “Manufacture and Characterization of SiC/SiC Composites”, TU-ONR/URI-1,
(September 15, 1986 – September 30, 1987).
16. “Manufacture and Characterization of SiC/SiC Composites”, TU-ONR/URI-2,
(October 1, 1987 – September 30, 1988).
17. Hygrothermal Influence on Flexural Properties o Kevlar 49-Graphite/Epoxy Hybrid
68
Composites”, TU-ONR/URI-2/E (October 1, 1987-September 30, 1988.)
18. Hygrothermal Influence on Inter-laminar Shear Strength of Kevlar 49-
Graphite/Epoxy Hybrid Composites”, TU-ONR/URI-2/F (October 1, 1987-
September 30, 1988.)
19. “Manufacture and Characterization of SiC/SiC Composites”, TU-ONR/URI-3,
(October 1, 1988 – September 30, 1989).
20. “Moisture and Temperature Induced Degradation in Tensile Properties of Kevlar-
Graphite/Epoxy Hybrid Composites”, TU-ONR/URI-3/B
21. “Characterization of Ceramic/Ceramic Composites”, TU-ONR/URI-3/C. (October 1,
1988-September 30, 1989.)
22. Characterization of Ceramic/Ceramic Composites”, TU-ONR/URI-4 23. “Effects of
Reinforcement Geometry on the Mechanical Properties of SiCw/A1203 Composites”,
TU-ONR/URI-4E.
23. “High Temperature Characterization of SiCw/SiC Composites and Prediction of
Flexural Properties by Energy Method”, TU-ONR/URI-5A.
24. “Compressive Response of Thermoplastic Composites by Layered Shell Elements”,
ALCOA Foundation, Pittsburgh, Pennsylvania.
25. Mechanical Property Characterization of Refractory Composites”, National
Aerospace Plane/Joint Program Office (NASP/JPO), WPAFB, OH.
26. An Investigation of the Effects of Environment and Compression on the Response of
Carbon/Peek Thermoplastic Composites”, NASA Marshall Space Flight Center,
Huntsville, AL.
27. Mechanical Property Testing of Resin Transfer Molded Materials”, McDonnel
Douglas Missile Systems, St. Louis, Missouri.
28. Reverse Fatigue of RTM Composites”, 3M Corporation, St. Paul, Minnesota.
29. “Effect of Stress Ratio on the Fatigue Damage in C/C Composites”, Strategic
Defense Command (SDC), US Army, Huntsville, Alabama.
30. “High Temperature Fatigue of Continuous Fiber Reinforced Silicon Carbide/Silicon
Nitride Composites”, National Science Foundation (NSF), Washington, DC 20550.
31. “Survivability of Affordable Aircraft Composite structures” Interim Progress Report,
April 2001, Air force Research laboratory, Grant No. F33615-99-C-3608.
32. “Dynamic Characterization of Graphite/Epoxy Composite Laminate Under
Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room
and Elevated temperatures”, Interim Progress Report, September 2001, U.S.
Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039.
33. “Survivability of Affordable Aircraft Composite Structures” Interim Progress Report,
October 2001, Air force Research Laboratory, Grant No. F33615-99-C-3608.
34. “Dynamic Characterization of Graphite/Epoxy Composite Laminate Under Inplane
Compression, Single and Double Lap Shear Loading at Subzero, Room and
Elevated temperatures”, Interim Progress Report, January 2002, U.S. Army Cold
Regions Research Laboratory, Grant No. DACA42-01-C-0039.
35. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under In-plane
Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated
temperatures,” Interim Progress Report, March 2002, U.S. Army Cold Regions
Research Laboratory, Grant No. DACA42-01-C-0039.
36. “Dynamic Characterization of Graphite/Epoxy Composite Laminate under Inplane
Compression, Single and Double Lap Shear Loading at Subzero, Room and
69
Elevated Temperatures”, Interim Progress Report, June 2002, U.S. Army Cold
Regions Research Laboratory, Grant No. DACA42-01-C-0039.
37. “Survivability of Affordable Aircraft Composite structures” Interim Progress Report,
April 2002, Air force Research laboratory, Grant No. F33615-99-C-3608.
38. “Survivability of Affordable Aircraft Composite structures” Interim Progress Report,
September 2002, Air force Research laboratory, Grant No. F33615-99-C-3608.
39. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane
Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated
temperatures,” Interim Progress Report, September 2002, U.S. Army Cold Regions
Research Laboratory, Grant No. DACA42-01-C-0039.
40. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane
Compression, Single and Double Lap Shear Loading at Subzero, Room and
Elevated temperatures,” Interim Progress Report, December 2002, U.S. Army Cold
Regions Research Laboratory, Grant No. DACA42-01-C-0039.
41. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane
Compression, Single and Double Lap Shear Loading at Subzero, Room and
Elevated temperatures,” Interim Progress Report, March 2003, U.S. Army Cold
Regions Research Laboratory, Grant No. DACA42-01-C-0039.
42. “Survivability of Affordable Aircraft Composite structures” Final Technical Report,
April 2003, AFRL-VA-WP-TR-2003-3071, Vol. 1: Overview, Manufacturing of
Affordable Composites and Ballistic Impact Testing.
43. “Survivability of Affordable Aircraft Composite structures” Final Technical Report,
April 2003, AFRL-VA-WP-TR-2003-3072, Vol. 2: High Strain Rate
Characterization of Affordable Composites.
44. “Survivability of Affordable Aircraft Composite structures” Final Technical Report,
April 2003, AFRL-VA-WP-TR-2003-3073, Vol. 3: Studies on the Low-Velocity
Impact Response of Woven Composites.
45. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane
Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated
temperatures,” Interim Progress Report, June 2003, U.S. Army Cold Regions
Research Laboratory, Grant No. DACA42-01-C-0039.
46. “Dynamic Characterization of Graphite/Epoxy Composite Laminates Under Inplane
Compression, Punch Shear and Transverse Loading, Volume I: Overview and High
Strain Rate Characterization,” Final Technical Report, October 2003, U.S. Army Cold
Regions Research Laboratory, Grant No. DACA42-01-C-0039.
47. “Dynamic Characterization of Graphite/Epoxy Composite Laminates Under Inplane
Compression, Punch Shear and Transverse Loading, Volume II: Transverse Loading
of Adhesively Bonded Composite Structures: Analysis and Experimentation,” Final
Technical Report, October 2003, U.S. Army Cold Regions Research Laboratory,
Grant No. DACA42-01-C-0039. Honors and Award
1. Global Messenger Award presented by Southeastern Consortium for Minorities in
Engineering (SECME), 2001
2. Outstanding Contribution Award by the National Association of Minority Program
Administrators (NAMEP A), 1996
70
3. Exxon Foundation Faculty Development Award for Outstanding Research, 1984.
4. Outstanding Teacher from ME Department, 1978-1979
5. Outstanding Teacher from School of Engineering, 1977-1978
6. Outstanding Teacher from ME Department, 1977-1978
7. Faculty Achievement Award, 1977
8. Outstanding Teacher from School of Engineering, 1977
9. UNCF Professor of the Year, 1976
10. Tuskegee Teacher of the Year, 1976
11. Outstanding Teacher from ME Department, 1975-1976
Professional and Scientific Societies 1. Registered Professional Engineering in the State of Alabama, (Alabama PE#1197)
Member, American Society of Mechanical Engineers (ASME)
2. Member, American Society of Engineering Education, (ASEE)
3. Member, Society of Experimental Stress Analysis (SESA)
4. Member, American Ceramic Society
5. Member, Sigma XI
6. Member, Pi Tau Sigma Honor Society
7. Secretary of Chattahoochee Sub-Section of ASME, 1984-1985
8. Vice President of Chattahoochee Sub Section of ASME, 1985-1986
9. Secretary of Chattahoochee Sub-Section of ASME, 1986-1987, 1987-1988
10. Member, American Ceramic Society
K-12 Initiatives
Dr. Jeelani was responsible (1980-1996) for writing proposals and raising approximately
$600,000 each year and conducting recruitment and retention programs in the School of
Engineering and Architecture at Tuskegee University. Most significant one was the $2.25
million grant from the DOD/ ARO grant for the period 1993-1998.
Tuskegee University is well known for its innovative K-12 programs- all designed and
implemented by Dr. Jeelani, during his tenure as a faculty member and Associate Dean of
Engineering and Architecture. These programs have become effective mechanisms to
identify, motivate and recruit students for academic programs in science and engineering.
The programs are briefly described below.
Saturday Academy
The program was offered for 8th through l2th graders attending Schools in Macon County,
Alabama, throughout the academic year to strengthen their background in Mathematics,
Physics, Chemistry, Biology and Physical Science, so that they could qualify for admission
in science and engineering curricula at the college level. Approximately l00 students were
served, each year.
71
Pre-Freshman Enrichment Program (PREP-8, PREP-9 and PREP-10)
These were six-week summer programs for students completing their 8th
, 9th
, and 10th
grades, respectively. PREP consisted of instruction in Mathematics, Biology, Chemistry,
Physics and Computer Programming. Laboratory sessions were designed to provide
students with experience in experimentation, report writing and problem solving. Field trips
were arranged for the students’ professional development. Approximately 75 students were
served, each summer.
Minority Introduction to Engineering (MITE)
MITE was a one to two week summer program designed to expose high school juniors/rising
seniors to various aspect of engineering and college life. The main features of the program
were lectures on engineering by faculty and engineering alumni, laboratory demonstrations,
seminars, field trips and picnics. The program was offered at no cost to the students, except
their transportation to and from Tuskegee. Approximately 60 students were served
through MITE, each summer.
Research Apprenticeship for Disadvantaged High Schoolers (RADHS)
RADHS was a summer program designed to provide high school juniors/rising seniors
the opportunity for “hands on” laboratory experience under the supervision of research
faculty. The students were also provided instruction in Computer Programming, Computer
Aided Design, Technical Writing and basic skills in research. Seminars, guest lectures, field
trips and career counseling were some additional features of RADHS. The students were
provided a stipend at a rate of minimum wage for the entire duration of the program.
Approximately 20 students were involved in RAHDS, each summer.
Freshmen Accelerated Start-Up and Training for Retention in Engineering Curricula
(FASTREC)
FASTREC was an eight-week summer program offered at Tuskegee every year for high
school graduates who were about to enter college. In the FASTREC program students
pursued an intensive program of study in English, Mathematics and Engineering Graphics
or Computer programming. Up to ten semesters credit hours were be earned towards the
B.S. Degree in Engineering. The students also attended guest lectures, seminars, field trips
and picnics. The program was at no cost to the student. Non- commuting students were
required to stay in the campus dormitory. Approximately 100 students participated in
FASTREC, each summer.
MITE, RADHS and FASTREC are still offered at Tuskegee University. At least 90% of the
FASTREC participants enter science and engineering programs at Tuskegee University.
Scholarship and Mentoring Program
Dr. Jeelani has developed and implemented an impressive scholarship and mentoring
program with support from the industry and the national labs. Corporations and foundations
such as Boeing, Ford Foundation, GEM, General Electric, General Motors, NACME, Proctor
and Gamble and Raytheon provide scholarship and mentoring support for students. Students
are selected for these scholarships based on merit and need. Scholarship recipients are also
assigned the responsibility of tutoring and mentoring their juniors and serving as big brothers
72
and big sisters. Dr. Jeelani has authored several educational partnership agreements (EPA)
with corporations and national labs. These EPAs include scholarships, support with
academic preparation, internships and mentoring. Two EPAs, Tuskegee-Raytheon and
Tuskegee-AFML (Air Force Materials Laboratory), are being replicated at other institutions.