sheet metal fab 100 metal rose project. break up into small groups and make a list of expected...
TRANSCRIPT
Sheet Metal Fab 100Metal Rose
Project
Break up into small groups and make a list of expected materials and tool that you think will be needed for this project.
There are many great websites and videos on the internet that show examples of how it is made.
You may use your phones, tablets, computers, etc.
How it’s Made
Each group will share with the rest of the class what types of tools and materials we will need for this project.
Safety Equipment
Leather gloves Safety glassesTinted goggles
Materials Needed
2x 5”x5” pieces of galvanized tin.12” barbed wire 1 stick of flux coated brazing rodGreen and red spray paint.
Tools Needed
Duck bill pliers Needle nose pliers Metal shearsAcetylene torch Heavy wire cutters
Step 1
Measure and cut out:1x 5’’ round of tin1x 4.5’’ round of tin
Step 2
Cut four 1.5’’ slits toward the middle of each piece.
Step 3
One ear at a time, fold over the edge with your duck bill pliers, and curve the petal until it starts to take the shape of a rose.
Step 4
Once both pieces are shaped, they will be placed within one another and brazed together.
Step 5
Carefully cut of 1 12’’ piece of barbed wire and braze it to the bottom of the rose.
Step 6
Paint your roses whatever color you like, and be amazed at what you have created with your own hands.