shenzhen tenet technology co., ltd tenet...
TRANSCRIPT
Shenzhen Tenet technology co., ltd
1
TENET CATALOGUE
Series loop detector
PD132 loop detector Used for wherever vehicles have to be detected
Monitoring and safe-guarding access ways or for counting vehicles
Output signal can be used for controlling door and gate drive mechanisms, operating barriers,
controlling traffic light systems or activating card dispensers in parking lots
Uses advanced microprocessor technology and can work in diverse environments
Has two way output relays, one is unlimited output when loop is permanently covered and while
the other is multiple mode that can be set by users
Operating voltage: 220V AC
Power consumption: <5W
Output relays: 240V/5A AC
Frequency range: 20 to 170kHz (4 grades adjustable)
Reaction time: 10ms
Signal holding time: unlimited/limited 10 when minutes loop is permanently covered
Sensitivity: eight grades (adjustable)
Loop inductance:<ul>
Ideal 100 to 300 hours (include connecting wiring)
Maximum 50 to 1,000 hours (include connecting wiring
PD-132
Shenzhen Tenet technology co., ltd
2
TLD-410 loop detector Features :<ul>
Output signal can be used for controlling door and gate drive mechanisms
Operating barriers
Controls traffic light systems or activates card dispensers in parking lots
Four-way relay output
Two outputs of them are unlimited when corresponding loop is permanently covered
Others are multi-mode that can be set by users
Direction detecting function
Used wherever vehicles have to be detected
For monitoring and safe guarding access ways or for counting vehicles
Can be used to statistics vehicle flux</ul>
Operating voltages : 12V AC/DC ± 5%
24V AC/DC ± 5%
110V AC ± 10%
220V AC ± 10%</ul>
Power consumption: <5W
Frequency range: 20 to 170 kHz (adjustable)
Reaction time: 180ms
Sensitivity: high, medium and low (adjustable)
Loop inductance: ideal 80 to 300μH (includes connecting wires)
Maximum loop inductance: 50 to 500μH (includes connecting wires)
Loop connecting wires: (maximum) 100m
Twisted at least 20 times per meter
Total resistance: <10Ω
Operating temperature: -30 to 70°C
Storage temperature: -40 to 85°C
Connection: 11-pin socket
Shenzhen Tenet technology co., ltd
3
Dimensions: 74 x 36 x 85mm TLD-410
TLD-500 loop detector Used for wherever vehicles have to be detected
Monitoring and safe-guarding access ways or for counting vehicles
Output signal can be used for controlling door and gate drive mechanisms, operating barriers,
controlling traffic light systems or activating card dispensers in parking lots
Uses advanced microprocessor technology and can work in diverse environments
Has two way output relays, one is unlimited output when loop is permanently covered and while
the other is multi-mode that can be set by users
Specifications:<ul>
Operating voltages: 220V AC ± 10%
Power consumption: 5W
Output: relay
Frequency range: 20 to 170kHz (4 grades adjustable)
Reaction time: 20ms
Sensitivity: 10 grades adjustable
Loop inductance:<ul>
Ideal 100 and 300μH (include connecting wiring)
Maximum 50 and 1,000μH (include connecting wiring)</ul>
Loop connection wiring: maximum 100m, twisted at least 20 times per meter
Total resistance: <10Ω
Operating temperature: -30 to +75 degree Celsius
Storage temperature: -40 to +85 degree Celsius
Humidity: ≤95% RH
Connection: 11-pin socket
Shell: PC and ABS engineering plastics
Installation: DIN rail
Dimension: 110 x 60 x 100mm
Shenzhen Tenet technology co., ltd
4
Net weight: 400g (include socket)</ TLD-500
VD-108B loop detector VD 108B is used for wherever vehicles have to be detected, for example for monitoring and
safe-guarding access ways or for counting vehicles
The output signal can be used for controlling door and drive mechanisms, operating barriers,
controlling traffic light systems or activating card dispensers in parking lots
VD108B only has one TTL-level output, which is unlimited
Operating voltage: 7 to 12V DC/100mA
Frequency range: 20 to 170KHz
Sensitivity: 0.02 to 0.2%(4 grades adjustable)
Reaction time: 100ms
Output delay : 2 seconds (optional)
Environment compensation: automatic drift compensation
Loop inductance: ideal 100 to 300uH 50 to 500uH (maximum) (include connecting wiring)
Operating temperature: -20 to +60'C
Storage temperature: -40 to +85'C
Relative humidity: ≦95%
Package: standard relay package
Size (L x W x H): 27 x 21 x 37mm
Net weight: 20g
<small>All images with trademarks are shown for reference purposes only. We are not authorized
to sell any items bearing such trademarks.</small>
Shenzhen Tenet technology co., ltd
5
VD-108B
TLD-110 loop detector Used for wherever vehicles have to be detected
Monitoring and safe-guarding access ways or for counting vehicles
Output signal can be used for controlling door and gate drive mechanisms, operating barriers,
controlling traffic light systems, or activating card dispensers in parking lots
Uses advanced microprocessor technology and can work in diverse environments
Has two way output relays:<ul>
One is unlimited output when loop is permanently covered
Other is multi-mode that can be set by users</ul>
Specifications:<ul>
Operating voltages: 12V AC ±5% and 24V AC ±5%
Power consumption: 5W
Output: relay
Frequency range: 20 to 170kHz (adjustable)
Reaction time: 100ms
Sensitivity: high, medium, and low (adjustable)
Loop inductance:<ul>
Ideal 80 and 300μH (include connecting wiring)
Maximum 50 and 500μH (include connecting wiring)</ul>
Loop connection wiring: maximum 100m, twisted at least 20 times per meter
Total resistance: <10Ω
Operating temperature: -30 to 70°C
Shenzhen Tenet technology co., ltd
6
Storage temperature: -40 to 85°C
Humidity: ≤95% RH
Connection: 11-pin socket
Dimensions: 74 x 36 x 85mm
Net weight: 270g (include socket)</
TLD-136
TLD-110
TLD-600 loop detector Features:<ul>
Used for wherever vehicles have to be detected
Shenzhen Tenet technology co., ltd
7
Monitors and safe guards access ways or counting vehicles
Output signal can be used for controlling door and gate drive mechanisms
Operating barriers
Controls traffic light systems
Activates card dispensers in parking lots
Uses advanced microprocessor technology
Works in diverse environments
Four-way output relays
Two outputs are unlimited when corresponding loop is permanently covered
Others are multiple mode that can be set by users</ul>
Specifications:<ul>
Operating voltages: 220V AC ±10%
Power consumption: <5W
Relay output
Frequency range: 20 to 170kHz (4 grades adjustable)
Reaction time: 20ms
Sensitivity: 10 grades (adjustable)
Loop inductance: ideal 100 to 300μH (includes connecting wires)
Maximum loop inductance: 50 to 1,000μH (includes connecting wires)
Loop connecting wires: maximum 100m
Twisted at least 20 times per meter
Total resistance: <10Ω
Operating temperature: -30 to +75°C
Storage temperature: -40 to +85°C
Relative humidity: ≤95%
Connection: 11-pin socket
Shell: PC and ABS engineering plastics
Installation: DIN rail
Dimensions: 110 x 60 x 100mm
Net weight: 400g (including socket
TLD-600
Shenzhen Tenet technology co., ltd
8
TCR-Series Card Collector
(TCR-Series Card Collector)
Features
* Mainly used in parking lots and ticket systems for
automatic card collecting or ticket checking.
Applicable to all kinds of paper cards or polyester type standard cards
* Non-metallic body design, does not affect the performance ofRFID card reading performance
* Can be connected to loop detector’s signal , can realize collecting card only when the vehicle
existing
* Can spit the card automatically when the reading failed
* Can give gate opening signal when the card collecting succeed
* Has the function of avoiding continuously incoming cards(TCR-615/TCR-620))
*Can cooperate with card reading device to use independently
* Industrial grade design , range of operating temperature range (-30 ℃ -85 ℃)
* Provides RS232 to be connected with upper computer for networking use
TCR-610 single-motor revenues Card
Collector (TCR-610 single-motor Card
Collector)
Specifications:
Operating voltage: 24VDC (maximum current 2A,
staticcurrent of 0.1A)
Operating temperature: -30 ℃ - 85 ℃
Operating Humidity: 30-90% (relative humidity)
Using Condition : installed in the bin
Collecting speed : about 2 seconds.
Apply card: All kinds of paper card or polyester type card.
Communication Interface: RS-485, RS-232, I / O (optional)
Shenzhen Tenet technology co., ltd
9
Card dispenser series TCD-720 (card dispenser) Industrial design, compact structure, simple and reliable control interface
Good resistance to abrasion and corrosion fit for high and low temperature environments
Simulation manpower friction card issuers, better adaptability to various deformed cards
Watchdog of hardware and micro-embedded real-time operating system to ensure reliable
operation
Pre-dispense function accelerate dispensing speed
Direct connectivity to inductor
Automatic buzzer alarm when fewer cards, no cards or failure
Provides RS232 and I/O voltage two control interface
Card recycling capacity is 40 pieces, automatic buzzer alarm when cards warehouse is full
Automatic reset: after the wrong alarm 30 or 100sec
Adjustable capacity of card warehouse
Card thickness: 3.2 to 2.5mm (adjustable) (ex-work setting: 0.8mm)
Motherboard slip design makes the installation and removal simple, convenient, and fast
Die-wide production ensure the products quality and consistency
TCD-720
TCD-820(Card dispenser) Specification:<ul>
Shenzhen Tenet technology co., ltd
10
Technical design, resistant to abrasion and corrosion fit for high or low temperature, dusty bad
environment
Simulation manpower friction card issuers easy adjusting of card thickness
Hardware watchdog, micro-embedded real-time operating system to ensure reliable operation
Pre-dispense function accelerate dispensing speed
Provide RS232 and I/O level two control interface
Automatic voice warning: lower cards, empty cards or failure
Automatically reset: after the mistakes alarm 30 or 100 seconds
Security recoveries: prevent lost card (only TCD 800 series)
Adjustable card thickness: 0.3 to 2.5m
Adjustable card boxes capacity: add stackable bins
Motherboard slip design, easy card loading and maintenance
Security recoveries: prevent cards lost </ul>
Technical data: <ul>
Operating voltage: 24V DC (maximum current of 2A and static current of 0.1A)
Operating temperature: -20 to 85°C
Communication interface: RS232/TTL
Operating relative humidity: 30 to 90%
Used condition: installed in bin
Card thickness: 0.3 to 2.5mm (adjustable) (ex-work setting: 0.8mm)
Card made of all kinds of paper cards and PVC/Mylar cards
Net weight: 2kg
Operating time: about 0.5s
Card capacity: 150pcs x 0.8mm (if add a lengthen box can add the card capacity)
Card back bin capability: 40pcs
TCD-820
Shenzhen Tenet technology co., ltd
11
TCD-180(Card dispenser) Features:<ul>
Industrial design
Compact structure
Simple and reliable control interface
Good resistance to abrasion and corrosion
Fit for high and low temperature environments
Simulation manpower friction card issuers
Better adaptability to various deformed cards
Automatic buzzer alarm when fewer cards, no cards or failure
Card recycling capacity is 40 pieces, automatic buzzer alarm when cards warehouse is full</ul>
Specifications:<ul>
Card material: all kinds of paper and PVC/Mylar
Automatic reset: after the wrong alarm 30 or 100 seconds
Adjustable capacity of card warehouse
Provides RS232/RS485 or I/O voltage control interfaces
Card thickness: 0.2 to 1.5mm (adjustable) (ex-work setting: 0.8mm)
Motherboard slip design makes the installation and removal simple, convenient and fast
Die-wide production ensure the products consistency
Operating voltage: 24V DC
Maximum current: 2A
Static current 0.1A
Used condition: installed in bin
Card dispensing speed: minimum 0.5 seconds
Card capacity: provide 150 pieces to choose (according to card thickness: 0.8mm/pieces)
Operating temperature: -30 to +70 degree Celsius
Operating humidity: 30 to 90%RH
Net weight: 1.5kg (include block pressure card)</ul>
Shenzhen Tenet technology co., ltd
12
TCD-180
TCD-5000(Card dispenser) Features:<ul>
Adopts the principle of friction type rubbing separating cards
Provide 2 types of interfaces RS232 and level control at a time
Pre-dispensing card and pre-reading card function can increase the card issuing speed
Can be connected with loop detector’s signal to realize, issuing when vehicle is coming, one
vehicle one card
Drawer type card recycling warehouse can hold more than 40 pieces of recycling cards
Stackable card case design, the card case’s capacity can be extended according to requirement
Shenzhen Tenet technology co., ltd
13
Guide rail type installation design, makes the card dispenser’s installation and easy to disassemble
Completely industrial design and product
All modular production ensures the consistency of products’ precision and quality</ul>
Technical data:<ul>
Operating voltage: 24V DC/1.5A
Card thickness: 0.3 to 1.5mm (adjustable)
Operating temperature: -30 to 70℃
Operating humidity: 30 to 90% (relative humidity)
Using condition: installed in cabinet avoiding light to use
Card dispensing speed: mini 0.5s (fastest)
Apply card: all kinds of paper card or polyester type cards
Card case’s capacity: 150 pieces (according to thickness of 0.8mm per card)</ul>
TCD-5000
TCD-830(Card dispenser) Features:<ul>
High-way card dispensing system specification
Collect and dispense card in one machine
Security recovery function
Industrial design, compact structure, simple and reliable control interface
Good resistance to abrasion and corrosion fit for high and low temperature environments
Simulation manpower friction card issuers, better adaptability to various deformed cards
Watchdog of hardware and micro-embedded real-time operating system to ensure reliable
operation
Shenzhen Tenet technology co., ltd
14
Pre-dispense function accelerate dispensing speed
Direct connectivity to inductor
Automatic buzzer alarm when fewer cards, no cards or failure
Provides RS232 and I/O voltage two control interface
Card recycling capacity is 40pcs
Automatic buzzer alarm when cards warehouse is full
Automatic reset: after the wrong alarm 30 or 100 seconds
Security recoveries: prevent cards lost
Adjustable capacity of card warehouse
Card thickness: 0.2 to 1.5mm (adjustable) (ex-work setting: 0.8mm)
Motherboard slip design makes the installation and removal simple, convenient and fas
Die-wide production ensure the products quality and consistency</ul>
Technical data:<ul>
Operating voltage: 24V DC (maximum current of 2A and static current of 0.1A)
Operating temperature: -20 to 80°C
Operating relative humidity: 30 to 90%
Used condition: installed in bin
Card: all kinds of paper cards and PVC/Mylar cards
Net weight: 2.8kg (include cards pressure block)
Card dispensing speed: about 0.5s
Card capacity: 150pcs (according to card thickness: 0.8mm/piece)
Adding a lengthen box can add the card capacity
Applicative card jaws
Mode k1 installed on control plate, with waterproof and anti-insert functions
Mode k3 installed on control plate
Mode k5 installed on card dispenser
TCD-830
Ticket Checking Machine Core
Shenzhen Tenet technology co., ltd
15
Main Performance
* Mainly used in tourist attractions, exhibition venues etc automatic ticket checking systems
* Ticket checking devices such as bar code reader and RF reader etc can be installed to it
* Has the function of paper ticket punching , 4 punching holes can be set on it
* Can income ticket flatly , and spiting ticket vertically (90o) or flatly is optional
* Incoming ticket automatically , the ticket will be returned if it’s over 3 seconds
* Continuously incoming tickets : when waiting for picking up the first ticket , it can still go on
collecting the second ticket
*The speed of incoming ticket is adjustable , to fit for different bar code readers and RF
readers
* With the functions of LED working condition indicating
and malfunction buzzer alarming
Specifications
Apply Ticket Materials : hard paper tickets , RF cards
Punching time: about 0.6 seconds
Progressive ticket time: about 0.5 seconds (adjustable)
Operating voltage: DC 24V/5A
Operating temperature: -20 ℃ to 65 ℃
Operating Humidity: 30-90% (relative humidity)
Using Condition : installed in cabinet avoiding light to use Red means there’s vehicle
* Safety Protection : lightning protection function , anti power supply reverse polarity function
Reader series
Long distance reading: up to 5m Directional reading, supports multiple readers in same region/community/work, do not interfere
with each other
Ultra-wide band design, suitable for frequency-hopping mode, with super-strong anti-interference
ability
Directly connects with standard wiegand (w26, w34) interface control devices, can be used
directly
RS232 interface connects with the controller or PC for data communication and exchange,
provides SDK development kit for further development to users
Technical data:<ul>
Working mode: FHSS or HSPF
Supported protocol: iso18000-6b
Reading speed: average less than 5ms every 64 bits for single card
Anti-collision: adopts effective binary tree anti-collision protocol, can read numerous tags
effectively at once
Licensing scheme: ensures the readers sold by a certain integrator can't read the RFID tags issued
Shenzhen Tenet technology co., ltd
16
by another integrator
Operating frequency: FCC ISM 880 to 950MHz adjustable bandwidth
Operating mode: provides 3 operating mode (client-serve, timing, and trigger)
Adjustable power range: 15 to 30 dBm</ul>
Application:<ul>
Automatic identification of persons, animals, goods, and more
To intelligent car park management systems, highway toll collection systems, electronic license
plate recognition security management, intelligent car park management, port entry and exit,
vehicle inspection management, warehouse management, personnel identification, and more
TRF-930A
TRF-012 ( short range ID card reader)
Feature:<ul>
Shenzhen Tenet technology co., ltd
17
Mainly used in car parking, military police and other units or enterprises vehicle Management
system
Using the UHF band 920MHz passive RFID tag technology
Antenna integrated design, directional reading of the tag of up to 5 to 10m
No battery-powered electronic license plate, the life of up to 10 years
Registration number can be written into the tag
Can read out of tag ID number and license plate number in high-speed driving
RF transmission power is small, in line with national green environmental protection standard
Can store up to 10 thousands vehicle registration numbers
Can manage the expiration date of the electronic license plate
Has a trigger control input that enables a car burst
Has a way output relays, can directly control the gates to open
A RS485 communication interface, can be used with the host computer network</ul>
Specifications:<ul>
Operating voltage: DC 9 to 12V/1.5A
Operating temperature: -30 to +70 degree Celsius
Communication interface: RS-485, RS-232, wiegand (optional)
Reader mode: automatic card reader, trigger control reader, command card reader (optional)
RFM-300 IC card reader
RFM Series non-contact reader with 13.56MHZ RF technology embedded low
power radio station MFRC522. Users do not have the complexity of
control RF base station, just a simple UART interface to send the
selected command to achieve full operation of the card. The series of
reader support for Mifare one S50, S70 and compatible cards.
Electrical Characteristics
1.Typical Power Supply: 5V
2.Reader Current: 100mA
3.Operating temperature: -25 ~ 85 ℃
4.UART interface,5V power supply
Shenzhen Tenet technology co., ltd
18
RFM-300
Parking guidance system components
TPG-300
TPG-300 parking space guidance controller Industrial design, high reliable: 32-bit ARM microprocessor, imbed real time operating system (RTOS)
Shenzhen Tenet technology co., ltd
19
Two RS485 interface, can connect to PC, LED car park display screen, ultrasonic detectors or controller Real-time CAN-bus communication with the characteristic of connecting local area network to each car parking controller, anti jjam, long distance communication much notes hanging Integrating the function of two channel loop detector, detecting the direction of vehicle easy Chinese and English menu, easy operating Easy construction, low cast (twisted-pair available), low maintenance Features: Working supply: 220V AC/100mA Working temperature:-20 to 70°C Sensitivity: 0 to 9 (adjustable) Maximum vehicle existence time: 3 to 255 seconds (adjustable) Loop inductance range: 80 to 500uH Vehicles detect speed: 5 to 100km/uH Using condition: apply to the single road with the width 2 to 4m Dimension: 155 x 110 x 60mm</ul> Disclaimer: All images with trademarks are shown for reference purposes only. We are not authorized to sell any items bearing such trademarks.</small>
TPC-100
TPC-100 ultrasonic sensor controller Industrial design, high reliable Two channels RS-485 communication line, with the advantage of strong anti-jam, much notes hanging Can set the quantity of the ultrasonic detector and the local address of ultrasonic controller, three channels relay output, and one channel car space lamp status output Scanning the car space status messages real-time, and awaiting the inquiry of PC at any movement Construction convenience, low cost (twisted-pair available), low maintenance
Shenzhen Tenet technology co., ltd
20
Feature: Power supply: 12V DC Working temperature: -20 to 70°C RS485 interface: semi duplex, baud rate 9,600bps
Dimension: 116 x 90 x 40mm
TUS-100
TUS-100 ultrasonic detector
Main purpose: Real-time detection of parking spaces on whether a
vehicle is present
Scope: Vehicle counting system, parking spaces guidance system
Shenzhen Tenet technology co., ltd
21
Detection method: Ultrasonic Ranging Radar Principles
Detection frequency: 40 KHz
Detection range: 30 ° angle, the effective filtering of human interference
Operating Voltage: AC/DC12V
Operating Temperature: -10 ℃ ~ 50 ℃
Communication mode: RS485 bus
Address Code: 6-bit code switch, maximum 64 addresses can be installed
Parking instructions: green without cars or light car
Security protection: lightning protection function, anti-polarity power
supply function
TED-600-I (indoor parking guidance display ) is used for parking guidance system, which connect with PC to show the relative empty parking
lots
Features:<ul>
Voltage: 5V ±5%
Outdoor screen current: 2A
Indoor screen current: 1.5A
Working temperature range: -10 to 70℃
Outer size: 450 × 80 × 350mm
485 interface for indoor highlighted
Single color: red and green (optional)
Arrows indicates can direct the empty areas
Showing figure is 120 x 60mm
Shenzhen Tenet technology co., ltd
22
TED-600
TED-800 (out door display) Product features:<ul>
Industrial design with longtime reliable operations
High brightness, uniformity, and has very good luminous consistency
The characters are clear, delicate, and life-like
Large viewing angle, horizontal angle can reach 110 degrees, vertical angle of up to 60 degrees
RS485 communication interface, the display shows real-time information
Communications can reach one kilometer distance
Supporting wide range of display mode: built-in real-time clock circuitry, support the clock
displays</ul>
Working parameters:<ul>
Working voltage: 5V ± 5%
Working electric current: 1.5A
Shenzhen Tenet technology co., ltd
23
Working temperature: -10 to 70 degrees Celsius
Characters displayed: 4
Display tube size: φ3
Outer size: 305 x 90mm
Install size: 177 x 84mm
Display screen size: 177 x 84mm</ul>
TDM-800-I( indoor Single screen) Working parameters:<ul>
Working voltage: 5V ± 5%
Working electric current: 1.5A
Working temperature: -10℃ to 70℃
Characters displayed: 4
Display tube size: φ3
Outer size: 305 x 90mm
Install size: 177 x 84mm
Display screen size: 177 x 84mm</ul>
Product features:<ul>
Industrial design with longtime reliable operations
Shenzhen Tenet technology co., ltd
24
High brightness, uniformity, and has very good luminous consistency
The characters are clear, delicate, and life-like
Large viewing angle, horizontal angle can reach 110 degrees, vertical angle of up to 60 degrees
RS 485 communication interface, the display shows real-time information, communications can
reach one kilometer distance
Supporting a wide range of display mode
Built-in real-time clock circuitry, support the clock displays</ul>