shoe rack bench - thediyplan.com · shoe rack bench supplies item quantity description 2x6x8'...
TRANSCRIPT
SHOE RACK BENCH
Supplies
Item
Quantity Description
2X6X8' 5 Framing lumber
2
1
2
" Pocket Hole Screws
2
1
2
" Deck Screws
THEDIYPLAN.COM PAGE-1
Step 1
Cut all pieces to
dimensions provided in the
cut list and drill pocket
holes. Start from the top
working down. Assemble
the top section of the
bench.
Step 2
Now assemble the sides
Step 3
Then separately
assemble the middle
section.
THEDIYPLAN.COM PAGE-3
Step 4
Take two scrap pieces and
cut them to 7
1
2
" long. This
will be used temporarily to
hold the middle section.
Step 5
Now take the middle
section and place it
over the temporary
scrap pieces and
attach to the side
boards. After that,
attached the middle
support blocks.
Step 6
Finally place the bottom
section and attached it to the
side. Use 2
1
2
" deck screws to
secure to the middle section
and support block. After
everything is secured, remove
the temp blocks.
THEDIYPLAN.COM PAGE-4