Feltest Equipment BV

for all PMC related products!

the world’s only one-stop shop

Feltest Equipment BV helps you to optimize Paper Machine Clothing performance, so that ...

P&P mills improve quality and runnability

PMC suppliers improve customer satisfaction

… which benefits all!

These professionals rely on Feltest Equipment every day:

F P D

AirSpeed/2 Measures felt permeability v

Capto Improve safety & comfort during PMC installation v v v

Caliper Profiler Accurate 30 cm caliper profile on running machine v v v

FiberScan Drainage analysis with microwave technology v

Fuji & Carbon Static nip load measurement v

PresScan No-nonsense water profiles in press felts v

RealSpeed Measure actual speed on the running machine v v v

Stroboscopes Pocket Strobe & PowerStrobe v v v

Tensio+ Point & profile tension measurements v v v

Tensometer Point tension measurements v v v

Body Cooling Improve safety, concentration and health v v v

RealVac - AirSpeed/2

Don't waste money; measure felt permeability to:

● avoid rewetting due to too open felts and reduce energy

● improve quality by avoiding crushing due to too dense felts

● avoid needlessly high vacuum levels and save energy

● use your felt washing agents most cost effective

Feltest Capto

• Improve safety, reduce the risk on accidents

• Reduce the risk of damaging PMC during installation

• Reduce paper machine down-time for PMC installation

• When using a rope, the hand grip remains available

Feltest Caliper Profiler

● Predict life potential and plan stops more accurately

● Never miss the thinnest spot and react to prolong fabric life

● Investigate edge problems on PU and other press felts

FiberScanONE

A regular drainage analysis helps you to:

● reduce the number of breaks and improve runnability

● improve sheet quality and reduce customer complaints

● select the best wires and dewatering elements

● optimize the consumption of expensive chemicals

During a maintenance stop, measure the press load to check:

● if poor sheet dryness is caused by a unexpected press load

● if poor sheet profiles are caused by uneven nip loads

Pressure sensitive film (Fuji film)

Feltest PresScan

Measure press felt moisture to:

● save drying energy by optimizing the press performance

● optimize the sheet profile

● estimate felt wear and optimize felt life

● investigate press vibrations at (high speed) machines

RealSpeed

Don’t calculate but measure the true roll and fabric speeds to easily identify those hard-to-find speed differences…

…between two sections that cause numerous sheet breaks

…between top and bottom wire that give poor paper quality

…between fabric and roll that cause increased fabric wear

Pocket Strobe LED & Power Strobe● check the wire turbulence and improve sheet quality

● check the HP showers and improve clothing life

● identify edge flipping in the press section

● check the trim nozzles and reduce breaks

Tensio+ and Tensometer

Measure the tension of Paper Machine Clothing to:

● avoid wrinkles or tearing and optimize PMC life

● influence dewatering behavior by controlled tension changes

● uneven tension profiles cause uneven sheet profiles; the Tensio+ makes profiles on the fly*

*on suitable positions

Feltest DigiMicro

Do a microscopic study of all your PMC surfaces:

● Take pictures without the need of a laptop

● Regularly check the Paper Machine Clothing wearand plan your stops more accurately!

Feltest BodyCooling

Reduce heat stress – improve safety!

● Easy to activate, easy to use, long lasting effect!

● Easy to activate – just soak in water and use for hours

● Use Feltest BodyCooling on the job or for faster recovery

Don't accept average PMC performance,

start optimizing today!

Check www.feltest.com for the latest news.

Join Paper Machine Clothing Professionals on