www.rosler.us

Shot Blasting Technology

Vibratory finishing and shotblast-ing test center located at theRösler headquarters inUntermerzbach:· more than 95 vibratory

finishing and shotblastingsystems

· working space: approx. 29,050 square feet

Similar test centers are located inthe United States, Great Britain,France, the Netherlands,Belgium, Switzerland, Spain,Italy, Austria, South Africa and Brazil.

Worldwide Demonstra-tion and Test Center

Consumables, machines andprocess safety in perfect combi-nation:· A perfect interaction between

consumables, equipment, process and safety

· Cost-saving automation linking multiple process steps

· Qualified field service teams guarantee smooth installationand commissioning of your equipment

· Comprehensive training of your operators and mainte-nance staff

· After-sales service guaranteeshigh uptimes for your equipment

The Total ProcessSolution

The consideration of environ-mental issues guaranteesa high level of product qualityand environmental protection.For example, recycling theprocess water is a key featureof our mass finishing techno-logy. In this case, the positiveeffect on the environmentis reflected in savings of com-pound and water of up to95%. At the same time, a highlevel of process reproducibilityand finishing quality is guaran-teed.

Environmental · Quality

Rösler is a dynamic organiza-tion where the initiative andcommitment of each employeeplays a key role. Systematictraining and a cooperativemanagement with lean struc-tures are essential elements ofour corporate philosophy. Thisallows us to create a work-place environment which attracts talented young people.

Team Spirit

finding a better way ...When it comes to dealing with surface finishing and surface preparation problems, Rösleroffers the total process solution! Our customers can choose between two processingtechnologies, Vibratory finishing or Shot blasting, which offer virtually unlimitedpossibilities. Through extensive processing trials, we always find the right finishing solutionfor our customer’s needs.This includes not only the development of a specific finishing process, but also the selectionof the right equipment and consumables.We deliver the total solution to satisfy your surface finishing requirements. Our success inthe market proves that we are right. It is not by chance that our innovative developmentsand our high quality standards have established Rösler as the world technology and mar-ket leader in surface finishing and surface preparation.

In more than 60 countries we support our customers with a closely-knitnetwork of Rösler subsidiaries and sales representatives.

We are the only company in our field operating test and demonstration centersthroughout the world. This allows us to run test trials under real production conditions closeto our customers.This offers several advantages: Our customers save time and money, and at the same time – through our professional processing trials and advice – they are assured of receiving thebest process solutions and products available on the market!

2

3

Steel- and ship buildingJewelry/watch parts

Automotive parts

Gas-, air-, plumbing fittings

Shot blasting is a technology which directs blast

media onto a parts surface at a speed of up to

270 miles/hr The media is accelerated either by

blast wheels (airless), compressed air, or electric

pumps (water jet cleaning). The blast results

depend on the type of blast machine, processing

parameters and selected blast media.

Turbine components

Audio, video, photo components

Electronic components

Cutlery and knife parts

Furniture and hardware

4

Hydraulic- pneumatic components

Implant and medical instruments

Aerospace components

Machine componentsBearing components

Hand tools

Concrete, stone and ceramic industry

Gearbox components

De-scaling, De-rusting

Paint Stripping, Coating Removal

Core Removal, Sand Removal

Shot Peening

Surface Cleaning

Deburring

High-pressure Water Jet Blasting, Satin Finish Wet Blasting

Painting, Rust Protection

Surface Finishing

Roughening

Computer parts

5

▲▲

▲▲

▲▲

▲▲

▲▲

▲

With the development of this continuous throughfeed tumble belt system, Rösler has opened upthe way to fully automatic and economical shotblasting of mass produced small to mid-sizebulk parts, as well as the blast cleaning oflarge, delicate components. All in the samemachine.

Our comprehensive product range offers modern shot blasting technologies whichcompletely fulfill today’s market requirements. In addition, we are constantly workingwith our customers to develop individual solutions to specific surface treatment problems.

Shot Blasting

RMBD 300/2 RMBD 400/2 RMBD 500/2 (4)

Dat

e: 1

1/07

10 14 16

12 16 20

Hurricane® 28, 32 and 42

2 2 2 or 4

7.5 – 15 7.5 – 15 7.5 – 15

x x x

13 17 17.5

13.5 14 17

Max. part size (measured diagonally in inch)

Tunnel diameter (inch)

Blast wheel types

Number of blast wheels

Blast wheel power (hp)

Integrated separation

Machine length (ft)

Machine height (ft)

Technical data

RMBD – Continuous Through Feed Tumble Belt Machines

6

This machine type is ideal for continuous,all-around shot blasting of flat, as well aslarge parts with complex geometry. Partsare transported through the blast machineon a highly wear-resistant wire mesh belt.Available with 2, 4 or 8 blast wheels.

RDGE – Wire Mesh Belt Machines

RDGE 800-2 (4,8) RDGE 1000-4 (8) RDGE 1250-4 (8) RDGE 1600-4 (8)

Dat

e: 0

3/08

Hurricane® 28, 32 and 42

2, 4 or 8

7.5 – 20 7.5 – 20 7.5 – 20 7.5 – 20

65 65 65 65

32 40 50 63

16 16 20 24

40 40 47 51

23 23 23 27

17 approx. 17 approx. 17 approx. 18 approx.

rotating drum screen, air wash separator, and dust collecting system

2,400 – 6,000 2,400 – 6,000 2,400 – 6,000 3,000 – 6,000

Blast wheel types

Number of blast wheels

Blast wheel power (hp)

Max. parts weight (lbs/linear ft)

Max. pass width (inch)

Max. pass height (inch)

Loading height (inch) 1

Machine length (ft)

Machine height (ft)

Media cleaning systems

Air volume dust collector (cfm)1 Measured from floor level

Technical data:

7

Rösler roller conveyor machines are specifically designed for blast cleaningvery long and flat parts, such as large area metal sheets and I-beams.They are also ideal for shot blasting low profile weldments. The components pass through the machine (usually a entrance vestibule, ablasting chamber and a blow off/brush-off chamber) on a special forceddrive roller conveyor system. The travel speed is variable. Rösler offers turnkey preservation lines for spraying a welding primer or a total surfacecoating on the blasted components. Regardless of the condition of yourraw materials, they can be pretreated, de-rusted and coated with a highgloss paint, all in a single process.

RRB – Roller Conveyor Machines

Dat

e: 1

1/07

1 Special dimensions and higher blast wheel power on request.2 Pullout device for blast wheels available (optional).

Technical data: 1 RRB 11/5 RRB 16/5 RRB 22/5 RRB 27/6 RRB 34/6 RRB 42/6 RRB 52/6

Range of components:Metal sheets,I-beams and

tubes

Metal sheets,I-beams and

tubes

Metal sheets,I-beams and

tubes

Metal sheets,I-beams and

tubes

Metal sheets,I-beams and

tubes

Metal sheets,I-beams and

tubes

Metal sheets,I-beams and

tubes

Max. component width (inch) 40 59 79 99 126 158 197

Max. component height (inch) 20 20 20 24 24 24 24

Maximum load (lbs/linear ft) 400 400 680 1,000 1,350 1,350 1,350

Number of blast wheelsand power (hp) 2

4 x 104 x 15

4 x 154 x 20

6 x 156 x 20

6 x 156 x 206 x 30

8 x 208 x 30

10 x 308 x 30*

*for plate only

12 x 3010 x 30*

*for plate only

Machine length withoutblow/brush-off (ft)

12 12 14 15 15 15 15

Machine length with blow/brush-off (ft)

20 22 23 25 25 25 25

Machine width (ft) 7 10 13 16 18 20 23

Machine height (ft) 18 19 22 26 26 30 30

Air volume dust collector (cfm) 3,000 4,400 6,000 8,900 12,000 15,000 18,000

Foundation pit recommended No No/Yes Yes Yes Yes Yes Yes

8

Rösler overhead rail hanger shot-blast machines are recommended forprocessing delicate parts which cannot be processed in bulk, and forparticularly complex, heavy, and/or large volume components.Available in four versions: Straight or Y-rail batch systems. Indexing orcontinuous monorail systems

RHB – Overhead Rail Hanger Machines

Dat

e: 1

1/07

RHBE 9/13 RHBE 11/16 RHBE 15/20 RHBE 20/25 RHBE 20/30 RHBE 25/25 RHBE 25/40 RHBE 30/40

Max. hanger diameter (D x H inch) 36 43 59 79 79 98 98 98

Max. hanger height (inch) 51 63 79 98 118 98 157 157

Max. hook weight with Y-rail (lbs) 2 x 1,100 2 x 2,200 2 x 2,200 2 x 2,200 2 x 3,300 2 x 3,300 2 x 3,300 2 x 3,300

Number of blast wheels and power (hp)

2 x 7.5 3 x 10 3 x 15 4 x 10 4 x 10 4 x 15 5 x 25 5 x 25

Length blast chamber (ft) 4 5 9 10 11 13 13 13

Total length (ft) 12 14 16 20 28 28 28 28

Machine width (ft) 7 8 17 18 19 21 21 21

Machine height (ft) 16 17 18 21 27 26 32 32

Air volume dust collector (cfm) 1,800 3,000 3,000 4,400 8,800 12,000 15,000 15,000

Foundation pit recommended No No Yes Yes Yes Yes Yes Yes

Technical data:

9

SBM/SBI blast machines are equipped with a V-shaped troughed belt. The transport cams on thebelt have an auger effect and induce a gentle forward movement of the components through theblast area. This machine type is especially suitablefor continuous shot blasting of high volumes ofsmall bulk parts. SBM/SBI machines can beequipped with blast wheels or air injection or pressure blast systems.

SBM/SBI – Continuous Loop Belt Conveyor Through Feed Machines

SBM 1010 SBM 1210 SBM 1520 SBM 2020

Max. part size (measured diagonally in inch)

Max. parts length (inch)

Blast wheel types

Number of blast wheels

Blast wheel power (hp)

Capacity 1 (lbs/hr)

Integrated separation

Machine length (ft)

Machine height (ft)

Technical data:4 7.5 7.5 10.5

6 9 9 13

Hurricane® 28, 32 and 42

1 1 2 2

7.5 10 each 10 each 15

1,450 2,200 4,400 5,500

– x x x

9 13 15 18

13 14 15 17 Dat

e: 1

1/07

1 In reference to steel parts

10

This machine type is ideal for batch processing of massproduced parts of all kinds of bulk parts. The RMBCoffers a wide range of shot blasting applications: Fromsmall, delicate plastic components up to large, heavyforgings. Available with either rubber belt or steel slattedtumbling mill.

RMBC – Tumble Belt Batch Machines

Technical data:

1 Higher payloads possible (option)

RMBC 2.1 RMBC 4.2 RMBC 6.2 RMBC 8.2RMBC 1.1

Max. batch volume (cuft)

Max. batch weight 1 (lbs)

Max. component weight (lbs)

Number of blast wheels

Blast wheel power each (hp)

Rubber belt

Steel slatted belt

Tumble belt width (inch)

Machine height (ft)

Media cleaning systems

Upgradeable for foundry applications

3.5 6 13.5 19 29

660 1,320 2,200 3,300 4,400

22 33 / 110 44 / 220 330 440

1 1 1 or 2 1 or 2 2

up to 1 x 10 up to 1 x 15 up to 2 x 20 up to 2 x 22 up to 2 x 40

x x x

x x x x

28 36 47 47 57

14 14 20 20 22

Vibratory screening unit, slide-in screens, air flow separation and dust collector unit

x x x

Dat

e:11

/07

11

Components are placed on the rotary table which passcontinuously through the blast area. This guarantees uniformblasting of the parts surface. RDT systems are available witha single rotary table or a segmented indexing table. RDTmachines can be equipped with blast wheels or air injectionor pressure blast systems. Table diameters from 39 to 98 inch.

RDT – Rotary Table Machine

Dat

e: 1

1/07

RDT 100 RDT 150 RDT 200 RDT 250

Rotary table diameter (inch)

Max. parts length (inch)

Max. load (lbs)

Number of blast wheels and power (hp)

Machine width (ft)

Machine length (ft)

Machine height (ft)

Air volume dust collector (cfm)

39 59 79 98

18.5 24 31.5 31.5

660 2,200 2,200 3,300

1 x 7.5 1 x 10 2 x 10 3 x 10

3.5 5.5 9 10

7.5 7.5 7.5 10

11 15 18 18

2,500 3,400 5,100 8,500

Technical data:

12

The RTC is designed for economic and consistent shotblasting of small to medium-sized components which aretoo small, light and flat to be processed in a tumble beltmachine. Automatic loading and unloading systems enable theintegration into a continuous production line.

RTC – Drum Blasting Machine

Dat

e: 1

1/07

RTC 1.1 RTC 2.1

Drum diameter (inch)

Max. drum depth (inch)

Drum perforation diameter (inch)

Max. batch weight (lbs)

Blast wheel (hp)

Machine height (ft)

Media cleaning systems

43 approx. 55 approx.

33.5 approx. 39 approx.

1/8 approx. 1/4 approx.

660 1,650

indirect drive indirect drive

1 x 20 1 x 30

18 18

Vibratory screening unit, slide-in screens, air flow separation and dust collector unit

Technical data:

13

With the rotary indexing satellite table machine, delicate partscan be processed on a continuous basis without touching eachother. The spectrum of blasting applications for these machinesranges from delicate deburring to shot peening. RSA machinesare also used for applications in which only certain areas of theparts need to be blasted. RSA machines can be equipped withblast wheels or pressure air systems

RSA – Rotary Indexing Satellite Table Machines

Dat

e: 1

1/07

RSA 1400

Machine width (ft)

Machine depth (ft)

Machine height (ft)

Max. pass height (inch)

Rotary table diameter (inch)

Number of satellites

Satellite diameter (inch)

Blasting gun Air nozzle ∅ (inch)

Blasting nozzle ∅ (inch)

Nozzle material

Air requirement per nozzle (cfm)

Filter

Type

Positioning accuracy of rotary table (inch)

5.5

6

8

14

43

6, 8, 10, 12

4

1/8 – 1/4

3/8 – 9/16

Steel or boron carbide50 – 145

RF 30/3 P/s or RF 20/2 P/s

Pressure blast or air injection

0.02 (with indexing motor)

Technical data:

14

The MT rotary barrel machines are ideal for shot blastingof extremely small parts which are too small to be blastedin a tumblast machine. However, MT machines are alsousable for blast cleaning of large bulky parts with weightsof up to 660 lbs. Automatic loading and unloading systems enable theintegration into a continuous production line.

MT – Rotary Barrel Blast Machines

Dat

e: 1

1/07

MT 3 MT 6B MT 8A MT 8HL MT 14B MT 22 MT 34

29 29 33 33 44 47 613/16

3/163/8

3/83/8

3/83/8

450 900 1,600 2,200 2,600 4,400 6,600

15 15 15 15 30 – 50 30 – 50 50 – 75

11.5 11.5 16 16 19 20 20

7 7 7 7 15 16 16

3 6 8 8 14 22 34

Barrel diameter (inch)

Perforation of barrel screens (inch)

Max. batch weight (lbs)

Blast wheel (hp)

Machine height (ft)

Machine width (ft)

Barrel working capacity (cuft)

Technical data:

The Inside of MT´s barrel

15

Pressure and pressurized injector blast cabinetsare ideal for blasting a wide variety of smallparts. The cabinets can be equipped with turntables, baskets, blast nozzles, pressure blasting systems, oscillators and other specialauxiliary blast units.

ST – Blast Cabinets

Machine width (inch)

Machine depth (inch)

Machine height (inch)

Blasting chamber width (inch)

Blasting chamber depth (inch)

Blasting chamber height (inch)

Blasting gun Air nozzle ∅ (inch)

Blasting nozzle ∅ (inch)

Nozzle material

Air requirement at 70 psi (cfm)

Absorption area (sq ft)

Exhaust power (cfm)

Fan power (hp)

Filter cleaning

ST 700 PS ST 1000 PS ST 1400 PS50 60 79

41 55 58

65 75 79

29 39 55

30 39 48

19 28 32

0.07 – 0.12 0.07 – 0.12 0.07 – 0.12

0.25 0.35 – 0.55 0.35 – 0.55

Steel or boron carbide

22 – 50 50 – 140 50 – 140

27 54 108

250 500 1,020

1/33/4 1

automatic

Technical data:

Dat

e: 1

1/07

16

Applications for this amazing, high performance shot blast systemwith one-arm robot include deburring, shot peening, and surfacecleaning of large-sized delicate components. Compared with conventional shot-blasting systems, the RROB systems offer veryshort time cycles with absolute process reliability and repeatabilityblast results.Precise horizontal and rotary parts movement by the patentedgripper provides a uniform finish and complete removal of theblast media.RROB systems are ideal for integration into automated productionlines or manufacturing cells.

RROB Roboblaster

This versatile shot blast system was developed to meet high performance blast requirements, and can be used for a wide variety of applications, especiallyfor “rotation-symmetrical” components. Thisdual chamber system allows for the largestpossible handling space when loading andunloading parts. The advantage of this shot blast system is that parts can be safelyloaded and unloaded in the open chamber,while other components are being blasted.

RWK - Oscillating Chamber Systems

17

This continuous blast machine with special – skewed roller --parts transport allows the comprehensive and uniform shot blasttreatment of tubes and round bars in a continuous process.Ideal for integration into a continuous production line.

RDR – Tube and Bar Blasting Machines

Shot peening is an important and essential process forimproving component fatigue life in many industrial sectors,primarily in the aerospace and automotive industries.Drive components (i.e. gears) are often subjected to the shotpeening process in order to induce compressive stresses,which considerably reduces the risk of fatigue cracks duringtheir operation. The service life of many components such asgearbox components, drive and crank shafts, springs, turbineblades and turbine components in general and many otherscan be extended multiple times with shot peening.

Shot Peening

18

The wet blasting process is used for surface improvement,cleaning, stripping and shot peening of delicate, high-precisioncomponents. The main advantages are that no dust is created,the ability to use very fine abrasives, the reduced media frag-mentation due to the water film (ideal for shot peening usingwith glass beads) and the reduced risk of inclusions (especiallyon soft metal) as water has a cleaning effect. Wet blasting isalso used for blast cleaning parts partially covered with greaseor oil.

High pressure water jet systems blast with pure water at a pressure of up to 60000 psi. This water jet is projected ontothe component to be treated by one or multiple nozzles mounted on a rotating nozzle holder. The rotation of the nozzle(s) generates a milling or grinding effect on the parts.This is a "soft" method to treat parts from which tenacious, veryhard coatings have to be removed.

Blasting with water has many advantages like no deformationsand an insignificant abrasion at the component, the processwater can be re-used in the closed circuit, no subsequentcleaning of the components necessary, no abrasive wear andanticorrosives may be utilized.

This technology has many applications in different industrialsectors, like removal of thermal coatings (e.g. plasma coatings)or paint stripping of a variety of different components. Also,removal of residual slag from welding seams or removal ofsand or ceramic residuals from castings.

Wet Blasting

High Pressure Water Jet Systems

19

Plastic Deflashing

Deflashing of Lead Frames

The high-performance SAB series is equipped with 2-8blast wheels and suitable for the continuous or indexinghigh-volume automatic deflashing of small to large-sized,especially delicate, thermoset components. Typicalapplications are the deflashing of components madefrom unsaturated polyester moulding compounds, likecontrol panels, etc.

SAB – Through-Feed Deflashing Machines

In addition to the standard range of machines, Rösleralso designs and builds custom made systems forspecial applications, such as deflashing machinesfor lead frames with automatic load, unloadand restack systems.

20

The Rösler Roboblaster RROB 350/1200-4was designed for fully automatic de-sanding,de-burring and surface finishing of cylinderheads. A cylinder head passes through theentire finishing process in 36 seconds, ofwhich only 10 seconds are utilized for theactual shot-blasting process.

The RMBC 8.2 tumblast machine was devel-oped to meet the most stringent blast cleaningrequirements for foundry and forge applica-tions. This system can finish parts weighing upto 440 lbs in batches of up to 28 cuft (max.batch weight 2,200 lbs).

Modern Roller Conveyor Machines RRB 27/6with dual-inclined blast wheel units (3 above and3 below the blast cabin). RRB machines are usu-ally equipped with our proven Hurricane wheelswith 15, 20 or 30 hp. For special high-perform-ance applications we offer wheels with a powerof 75 hp.

For fully automatic surface finishing of the outer sur-faces and inner channels of mid-sized components,Rösler developed the Complete-Desander (RCD). Ina RWH 6/12-2 oscillating chamber shot blastingsystem the outer surface is treated and in a second-ary air blast cabinet a robot - equipped with blastnozzles - blast cleans difficult-to-reach surfaces suchas inner channels and hidden surfaces.

Automation

21

Test Centers worldwide

Test Centers and ServiceFinding a better way…a commitment to our customers

For Rösler service is not just an empty promise

Throughout our worldwide organization we adhere to strict quality control procedures. This applies especially to our test centers where we develop process solutions for all kinds of surface finishing problems. Each branch of the Rösler group features its own test center equipped with the latest Rösler finishing equipment. This equipment is utilized exclusively for processing trials with our customer’s sample parts.

Professional advice, short turn-around times and prompt and reliable service: Rösler offers single-source surface finishing solutions, worldwide!

� Installation and trainingMachine installations and operator training are performed by our team of highly skilled and experienced service engineers

� In-House Manufacturing

In line with our corporate philosophy to be a true “single source” supplier, Roslerengineers and manufactures all equipment components like vibratory motors;load/unload systems, control panels, welding constructions, laser cut parts, etc.,in-house.

� Spare parts service for all recognized shot blast systemsSurface finishing equipment generally is subject to a considerable amount ofwear. For this reason preventive maintenance and prompt supply of spare parts are a key requirement for any surface finishing installation. Rösler maintains a complete inventory of spare parts in every branch, ensuring localsupply and fast availability, be it wire mesh belts, blast wheels, pressurevessels or any kind of nozzles, etc. To minimize downtime, parts are eitherdelivered and installed by our own field service personnel or shipped to our customer’s location overnight.

� Maintenance and repair serviceRösler maintains a well trained staff of professional field service engineers providingprompt, reliable maintenance and repair service as well as overhaul of your olderequipment.

22

Preservation Lines

Complete preservation lines with pre-heating, shotblastingsystem, patented painting line and dryer from a singlesource.

Aero Engine/Airframe Preparation and FinishingSpecial processes for surface treatment such as shot peening,Paint stripping, water-jet cleaning, peen forming.

www.rosler.com

Aero engine / Airframe Preparation and Finishing

www.rosler.com

Conservation Lines

We would like to draw your attention to other publications for special machines and processes.

Rösler Special Surface Finishing Solutions

23

Surface Finishing · Shot Blasting · Engineering · Environmental TechniquesRÖSLER Oberflächentechnik GmbH · www.rosler.com

D

ZA

GB

E NL

D

A

F

USA BR

I

CH

www.rosler.us

RÖSLER Metal Finishing USA, L.L.C.1551 Denso Road · USA-Battle Creek · MI 49037Tel.: +1/269/4413000 · Fax: +1/269/4413001 · info@rosler.us

RÖSLER UKUnity Grove, School Lane · Knowsley Business Park · GB-Prescot, Merseyside L34 9GTTel.: +44/151/4820444 · Fax: +44/151/4824400 · rosler@rosleruk.com

RÖSLER FranceZ.I. de la Fontaine d’Azon · B.P. 513 – St. Clément · F-89105 Sens CedexTel.: +33/3/86647979 · Fax: +33/3/86655194 · rosler@rosler.fr

RÖSLER International GmbH & Co. KGSucursal en España · Polg. Ind. Cova Solera C/Roma, 7 · E-08191 Rubí (Barcelona)Tel.: +34/93/5885585 · Fax: +34/93/5883209 · rosler@rosler.es

RÖSLER Italiana S.r.l.Via E. Vittorini 10/12 · I -20049 Concorezzo (MI)Tel.: +39/039/611521 · Fax: +39/039/6115232 · info@rosler.it

RÖSLER Benelux B.V.Reggestraat 18 · NL-5347 JG Oss · Postbus 829 · NL-5340 AV OssTel.: +31/412/646600 · Fax: +31/412/646046 · info@rosler-benelux.nl

RÖSLER Benelux B.V.Avenue de Ramelot 6 · Zoning Industriel · B-1480 Tubize (Saintes)Tel.: +32/2/3610200 · Fax: +32/2/3612831 · info@rosler-benelux.be

RÖSLER Oberflächentechnik GmbHHetmanekgasse 15 · A -1230 WienTel.: +43/1/6985180-0 · Fax: +43/1/6985182 · office@rosler.at

RÖSLER Romania SRLStr. Horia Closca si Crisan 17-19 · RO-075100 Otopeni/ILFOVTel.: +40/21/352 4416 · Fax: +40/21/352 4935 · rosler@rosler.ro

RÖSLER Schweiz AGStaffelbachstraße 189 · Postfach 81 · CH-5054 KirchleerauTel.: +41/62/7385500 · Fax: +41/62/7385580 · info@rosler.ch

RÖSLER Oberflächentechnik GmbH · Werk MemmelsdorfVorstadt 1 · D-96190 UntermerzbachTel.: +49/9533/924-0 · Fax: +49/9533/924-300 · info@rosler.com

RÖSLER Oberflächentechnik GmbH · Werk HausenHausen 1 · D -96231 Bad StaffelsteinTel.: +49/9533/924-0 · Fax: +49/9533/924-300 · info@rosler.com

RÖSLER do Brasil LTDAEstrada dos Galdinos 35 · Jd. Barbacena · 06700-000 - Cotia · São Paulo - BrasilTel.: +55/11/46123844 · Fax: +55/11/46123845 · rosler@rosler.com.br

RÖSLER S.A. Surface TechnologiesP.O. Box 7949 · 66 Regency Drive · Route 21 Corporate Park · Irene Ext. 31 · ZA-0046 CenturionTel.: +27/12 /345 2215 · Fax: +27/12 /345 3731 · johanv@roslersa.co.za

RÖSLER – BEIJING Office 11N, Tower A, Beijing Fu Hua Mansion · No. 8, Chaoyangmen North AvenueDong Cheng District · Beijing 100027 P.R. ChinaTel.: +86/10/6554 73 86 · +86/10/6554 73 89 · Fax: +86/10/6554 73 87 · info@rosler.com.cn

RÖSLER SurfaceTech Pvt. Ltd.No.9, I Main Road, M.L.A Layout · R.T. Nagar · IND-Bangalore 560 032Tel.: +91/80 23534445 · Fax: +91/80 23339165 · info@rosler.net.in

and more than 60 representations worldwide

USA

GB

F

E

I

NL

B

A

RO

CH

D

BR

ZA

CN

IND

•

Surface Finishing · Shot Blasting · Engineering · Environmental TechniquesRÖSLER Oberflächentechnik GmbH · www.rosler.com

Publ

.-Nr.

1174

.6 u

sa –

Spec

ifica

tions

are

sub

ject

to c

hang

e w

ithou

t not

ice.