shower accessories shower accessories … · shower accessories mira eco showerhead 196 ... even...
TRANSCRIPT
SHOWER ACCESSORIES
MIRA ECO SHOWERHEAD 196 MIRA EVERCLEAR SHOWERHEAD 198 MIRA SHOWERHEAD RANGE 200 MIRA ACCESSORIES 204 MIRA SLIDE BARS 206 MIRA FITTINGS KITS 207 MIRA MIX AND MATCH BAR VALVES AND FITTINGS 210
WHATEVER ACCESSORY YOU’RE LOOKING FOR YOU’LL FIND IT HERE, THEY’RE ALL EASY TO FIT AND MANY WILL EVEN FIT OTHER MAKES AND MODELS OF SHOWER! SO, EVEN IF YOU’RE NOT WORKING WITH A MIRA, YOU CAN STILL ADD A LITTLE MIRA QUALITY, HERE AND THERE
GET YOURSELF ONLINE AND TAKE A LOOK AT OUR WIDE RANGE OF ACCESSORIES; WE HAVE PRODUCTS THAT WILL HELP IMPROVE PERFORMANCE, HELP REFRESH, HELP REPAIR AND EVEN HELP SAVE WATER – AND YOU CAN BUY THEM ALL ONLINE 24/7
SHOWER ACCESSORIES
194 MIRASHOWERS.CO.UK/EXPERT 195
IT’S SAVING THE ENVIRONMENT, BUT NOT AS YOU KNOW IT!
The days of having to compromise performance when saving water are gone. With our innovative Mira Eco showerhead, your customer saves up to 75%† water, but still enjoys an outstanding shower experience.
By delivering larger water droplets filled with air, Mira Eco creates a great shower experience while radically reducing the amount of water used, so your customers no longer have to choose between that exhilarating Mira feeling and doing their bit for the environment.
And, even better, a Mira Eco showerhead could also save your customers loads of money on their fuel bills, too! As there’s less water to heat it means they use less electricity or gas – perfect, eh?
† When compared with a Mira Logic showerhead at 0.5 bar pressure. Mira Eco is not suitable for electric showers or gravity fed systems under 0.5 bar pressure.
Flow rates (litres per minute) at 0.5 barLogic showerhead Vs Eco showerhead18
16
14
12
10
8
6
4
2
0
The Mira Eco showerhead uses on average 10.2 litres per minute less than the Mira Logic showerhead
Eco showerheadLogic showerhead
start soothe force
11.9
3.7 3.73.5
11.9
17.8
Mira Logic showerhead at 0.5 bar Mira Eco showerhead at 0.5 bar
The spray plate automatically pushes through small pins to prevent limescale build up. It can also be manually pressed for an extra clean if necessary
LIMESCALE?LIMESCALE?WHAT The Mira Everclear showerhead
has got it in for limescale – and with good cause. Limescale contributes to most problems relating to performance. Everclear’s unique design resists limescale build-up with its automatic self-drain function that cleans itself after every use but, for extra cleaning, the integrated push-pins demolish limescale build-up in one easy motion, if needed.
Over 60% of the UK’s population is affected by hard water. It’s this hardness that clogs up all those nozzles with all that annoying limescale, restricting the flow. But, with Mira Everclear, limescale doesn’t have chance to take hold.
The showerhead itself is easy to fit and perfect for mixer showers over 0.2 bar and electrics over 9.0kW.
Mira Everclear showerhead
Ordinary showerhead
200 MIRASHOWERS.CO.UK/EXPERT 201
SHOWER ACCESSORIES
MIRA SHOWERHEAD RANGE175 mm
20°
85 mm
MIRA RESPONSE 4 SPRAY
Part Number: Chrome/Dark Grey: 2.1605.106, White/Grey: 2.1605.103
Connection: Standard ½" BSP connection
137 mm
193
mm
38°
90 mm
MIRA NECTAR 4 SPRAY
Part Number: Chrome: 2.1703.004, White: 2.1703.002
Connection: Standard ½" BSP connection
110 mm74 mm
251
mm 63°
MIRA BEAT 11CM 4 SPRAY
Part Number: Chrome: 1.1605.237, White: 1.1605.238
Connection: Standard ½" BSP connection
40°
169 mm
199
mm
MIRA LOGIC 4 SPRAY
Part Number: Chrome: 2.1605.176, White: 2.1605.177
Connection: Standard ½" BSP connection
135 mm
145 mm
230
mm
MIRA 360M 4 SPRAY
Part Number: White/Chrome: 2.1688.001
Connection: Standard ½" BSP connection
90 mm27 mm
233
mm 63°
MIRA BEAT SINGLE SPRAY
Part Number: Chrome: 2.1703.011, White: 2.1703.009
Connection: Standard ½" BSP connection
FOR ANYSHOWER
90 mm65 mm
233
mm 63°
MIRA BEAT 9CM 4 SPRAY
Part Number: Chrome: 2.1703.012, White: 2.1703.010
Connection: Standard ½" BSP connection
FOR ANYSHOWER
FOR ANYSHOWER
137 mm
193
mm
38°
90 mm
MIRA NECTAR SINGLE SPRAY
Part Number: Chrome: 2.1703.001, White: 2.1703.003
Connection: Standard ½" BSP connection
FOR ANYSHOWER
FOR ANYSHOWER
FOR ANYSHOWER
FOR ANYSHOWER
FOR ANYSHOWER
40° 199
mm½
″ BSP Male
169 mm
OVER 0.2bar
FOR MIXERSHOWERS
OVER 9kW
FOR ELECTRICSHOWERS
MIRA EVERCLEAR SINGLE SPRAY
Part Number: Chrome: 2.1605.111
Connection: Standard ½" BSP connection
90mm
170m
m
175mm
MIRA ECO 3 SPRAY
Part Number: Chrome: 2.1605.112, White: 2.1605.110
Connection: Standard ½" BSP connection
OVER 0.5bar
FOR MIXERSHOWERS
202 MIRASHOWERS.CO.UK/EXPERT 203
SHOWER ACCESSORIES
MIRA SHOWERHEAD RANGE
255 mm 73 mm
200
mm
138 mm
with built-in pipework
MIXER SHOWERSover 0.2 bar
MIRA DISCOVERY SINGLE SPRAY (FIXED)
Part Number: Chrome: 1.1595.244
Connection: Standard ½" BSP threaded nipple
with built-in pipework
MIXER SHOWERSover 0.2 bar
MIRA BEAT 200MM OVERHEAD
Part Number: Chrome: 1.1799.001, White: 1.1799.002
Connection: Fits any arm with standard ½” connection
Swivel ball joint for flexible, precise adjustment of spray angle
with built-in pipework
MIXER SHOWERSover 0.2 bar
MIRA BEAT WALL-FED ARM
Part Number: Chrome: 1.1799.005
Connection: 15mm compression joint – front of tile installation
Use with Mira Beat 200mm or 250mm overhead
with built-in pipework
MIXER SHOWERSover 0.2 bar
MIRA BEAT CEILING-FED ARM
Part Number: Chrome: 1.1799.006
Connection: 15mm compression joint – front of tile installation
Can be cut to length. Use with Mira Beat 200mm or 250mm overhead
MIRA LOGIC 4 SPRAY (FIXED)
Part Number: Chrome: 2.1605.184
Connection: Compression fit
212 mm MAX20°20°
20°
20°
212 mm MAX20°20°
20°
20°
MIRA ECO 3 SPRAY (FIXED)
Part Number: Chrome: 1.1595.244
Connection: Compression fit
40°
169 mm
199
mm
MIRA LOGIC 4 SPRAY POWER
Part Number: Chrome: 2.1605.178, White: 1.1540.268
Connection: Standard ½" BSP connection
MIRA RESPONSE 4 SPRAY POWER
Part Number: Chrome/Dark Grey: 2.1605.181, White/Grey: 1.0.411.82.2
Connection: Standard ½" BSP connection
175 mm
20°
85 mm
205
5067
41
Ø200mm
83 60
520
970
1063
with built-in pipework
MIXER SHOWERSover 0.2 bar
MIRA BEAT 250MM OVERHEAD
Part Number: Chrome: 1.1799.003, White: 1.1799.004
Connection: Fits any arm with standard ½” connection
Swivel ball joint for flexible, precise adjustment of spray angle
1063
545
24610882
50
83 60
970
Ø250mm
FOR POWERSHOWERS
FOR POWERSHOWERS
with built-in pipework
MIXER SHOWERSover 0.4 bar
with built-in pipework
FOR MIXERSHOWERS
204 MIRASHOWERS.CO.UK/EXPERT 205
SHOWER ACCESSORIES
337
mm
380
mm
350 mm55 mm
365
mm
440
mm
350 mm 48 mm
ACCESSORIES
MIRA RESPONSE HOSE
Part Number: 1.25m Chrome: 1.1605.167, 1.75m Chrome: 1.1605.168
Connection: Standard ½" BSP connection
MIRA RESPONSE SOAP DISH
Part Number: Chrome: 2.1605.126, White: 2.1605.125
Connection: Fits onto Mira Response Slidebar and all 18/22 mm slidebars
MIRA LOGIC SOAP DISH
Part Number: Chrome: 2.1605.195, White: 1.450.12.1
Connection: Two screws (wall plugs included)
MIRA LOGIC WALL OUTLET
Part Number: Chrome: 2.1605.199
Connection: Fits all hoses
MIRA 1.5 & 2.0 BAR TWIN-ENDED PUMPS
Domestic twin impeller inlet shower pump used to simultaneously boost hot and cold supplies
Part Number: 2.1745.001 (1.5 bar) or 2.1745.002 (2.0 bar)
Typical flow rate: 12 l/min at 1.0 bar (1.5 bar) or 17 l/min at 1.0 bar (2.0 bar)
Peripheral vortex (regenerative) impeller design
Quiet motor rated for 30 minutes on/30 minutes off.
Integral flow switch for automatic operation
Connection: 4 x 190mm braided flexible hose connectors each featuring push-fit connectors. Integral isolators included on the 2x inlet hoses
MIRA 3.0 BAR BRASS TWIN-ENDED PUMP
Domestic twin impeller inlet shower pump used to simultaneously boost hot and cold supplies
Part Number: 2.1745.003
Typical flow rate: 34 l/min at 1.0 bar
Peripheral vortex (regenerative) impeller design
Durable brass bodied construction
Peripheral vortex (regenerative) impeller design
Quiet continuously rated motor
Integral flow switch for automatic operation
Connection: 4 x 190mm braided flexible hose connectors each featuring push-fit connectors. Integral isolators included on the 2x inlet hoses
MIRA LOGIC CLAMP BRACKET
Part Number: Chrome: 2.1605.128, White: 2.1605.127
Connection: Fits onto Mira Logic Slidebar
MIRA LOGIC SHOWER HEAD HOLDER
Part Number: Chrome: 2.1605.150, White: 2.1605.149
Connection: Two screws (wall plugs included)
MIRA LOGIC HOSE
Part Number: 1.25m Chrome: 2.1605.166, 1.75m Chrome: 2.1605.139
Connection: Standard ½" BSP connection
MIRA PREMIUM SHOWER SEAT
Part Number: White/Chrome: 2.1731.001, Chrome/Dark Grey: 2.1731.002
Integrated drainage holes
Folds away when not in use
150 kg weight limit
MIRA SHOWER SEAT
Part Number: White/Chrome: 2.1536.129, White: 2.1536.128
Must only be fitted to solid walls
Folds away when not in use
95.5 kg weight limit
206 MIRASHOWERS.CO.UK/EXPERT 207
SHOWER ACCESSORIES
250 mm maximum
600
mm
52 mm
332 mm maximum
620
mm
265 mm
344 mm Max.
600
mm
245 mm
620
mm
(Max
imum
)
FOR ANYSHOWER
FOR ANYSHOWER
FOR ANYSHOWER
FOR ANYSHOWER
FOR ANYSHOWER
FOR ANYSHOWER
SLIDE BARS FITTINGS KITS
MIRA NECTAR SLIDE BAR
Part Number: Chrome: 2.1703.008, White/Chrome: 2.1703.007
Connection: Two screws (wall plugs included)
FOR ANYSHOWER
MIRA EXTRA LONG SLIDE BAR
Part Number: 1.0.413.10.2
Connection: Two screws (wall plugs included)
MIRA BEAT SLIDE BAR
Part Number: Chrome: 2.1703.018, White/Chrome: 2.1703.017
Connection: Two screws (wall plugs included)
MIRA LOGIC
Part Number: Chrome: 2.1605.154
Pressure Range: 0.1-5.0 bar
Connection: Standard ½" BSP connection
MIRA NECTAR
Part Number: Chrome: 2.1703.006, White/Chrome: 2.1703.005 Chrome 1.75m hose (for BSM) 2.1703.390
Pressure Range: 0.1-5.0 bar | Connection: Standard 1/2” BSP connection
MIRA BEAT
Part Number: Chrome: 2.1703.016, White/Chrome: 2.1703.015 Chrome 1.75m hose (for BSM) 2.1703.391
Pressure Range: 0.1-5.0 bar | Connection: Standard 1/2" BSP connection
MIRA RESPONSE
Part Number: Chrome: 2.1605.156, White/Chrome: 2.1462.031
Pressure Range: 0.06-5.0 bar
Connection: Standard 1/2" BSP connection
OVER 0.2bar
FOR MIXERSHOWERS
OVER 9kW
FOR ELECTRICSHOWERS
MIRA FLEX
Part Number: Chrome: 1.1603.125
Pressure Range: 0.06-5.0 bar
Connection: Standard ½" BSP connection
322mm23mm
100m
m
208 MIRASHOWERS.CO.UK/EXPERT 209
SHOWER ACCESSORIES
600
mm
75.5 mm
645
mm
FOR ANYSHOWER
MIRA DISCOVERY
Part Number: Chrome: 2.1605.151
Pressure Range: 0.05-5 bar
Connection: Standard ½" BSP connection
FITTINGS KITS
600
mm
82 mm150 mm
FOR ANYSHOWER
MIRA 360 CLASSIC
Part Number: White/Chrome: 1.1688.005
Pressure Range: 0.1-5.0 bar
Connection: Standard ½" BSP connection
OVER 0.2bar
FOR MIXERSHOWERS
OVER 9kW
FOR ELECTRICSHOWERS
MIRA EVERCLEAR
Part Number: Chrome: 2.1605.152, White: 2.1616.036
Pressure Range: 0.05-5.0 bar
Connection: Standard ½” BSP connection
600
mm
150 mm
40° 199
mm½
″ BSP Male
169 mm
210 MIRASHOWERS.CO.UK/EXPERT 211210 MIRASHOWERS.CO.UK 211
SHOWER ACCESSORIES
MIX AND MATCH BAR VALVES AND FITTINGS
SHOWER ACCESSORIES
SOMETIMES YOUR CUSTOMER MAY ONLY WANT TO REPLACE THEIR MIXER VALVE, OR UPDATE THEIR SHOWER FITTINGS. HERE AT MIRA, WE’VE GOT A WIDE RANGE OF VALVE ONLY OPTIONS WHICH YOU CAN MATCH WITH FITTINGS, CHOSEN FROM PAGES 207-209.
MIRA CODA (EXPOSED VALVE)
Thermostatic temperature control
Separate flow and temperature controls
Maximum temperature stop
MIRA GEM 88 (EXPOSED VALVE)
Manual temperature control
Separate flow and temperature controls
Anti-limescale technology
MIRA DISCOVERY DUAL (EXPOSED VALVE)
Thermostatic temperature control
Separate flow and temperature controls
Maximum temperature stop
MIRA SILVER (EXPOSED VALVE)
Thermostatic temperature control
One single control for flow and temperature
Accepts falling, rising and rear supplies
MIRA DISCOVERY CONCENTRIC (EXPOSED VALVE)
Thermostatic temperature control
Separate flow and temperature controls
Maximum temperature stop
MIRA COMBIFORCE 415 (EXPOSED VALVE)
Pressure balancing technology
One single control for flow and temperature
Maximum temperature stop
MIRA GEM 88 (BUILT-IN VALVE)
Manual temperature control
Separate flow and temperature controls
Anti-limescale technology
MIRA DISCOVERY DUAL (BUILT-IN VALVE)
Thermostatic temperature control
Separate flow and temperature controls
Maximum temperature stop
MIRA SILVER (BUILT-IN VALVE)
Thermostatic temperature control
One control for flow and temperature
Maximum temperature stop
MIRA DISCOVERY CONCENTRIC (BUILT-IN VALVE)
Thermostatic temperature control
Separate flow and temperature controls
Maximum temperature stop
MIRA EXCEL (BUILT-IN VALVE)
Thermostatic temperature control
Separate flow and temperature controls
Maximum temperature stop
MIRA EXCEL (EXPOSED VALVE)
Thermostatic temperature control
Separate flow and temperature controls
Maximum temperature stop
MIRA 2-WAY BUILT-IN DIVERTER
Two way diverter valve
Divert between overhead and handset
MIRA DISCOVERY & DIVERTER VALVE
Two way diverter valve
Divert between overhead and handset
Magni-Flo™ gives up to 3x more flow | Thermostatic