showtime 21-1

44
Issue 1 . Volume 21 . Spring 2016 1 Showtime As Asia’s showpiece event for the animal feed, dry petfood, aquafeed, grain processing, rice & flour milling and biomass pelleting industries these senior industry executives will also see many new products and services that are being launched at the show. This was also the message at the recently held press conference in Bangkok for FIAAP, VICTAM & GRAPAS Asia 2016: “Sustained growth of the size and influence of the event. Innovations within the event and the continued introduction of new products and services at the showpiece event by the exhibitors”. This theme was echoed by the principal speakers at the press conference in Bangkok: Mr. Pornsil Patchrintanakul – Chairman of the Federation of ASEAN Feed Associations and President of the Thai Feed Mill Association; Mr. Manat Kitprasert – President of the Thai Rice Millers Association; Mr. Henk van de Bunt – General Manager, Victam International BV and Ms. Catelijne de Gooijer – Visitor Promotion and PR Manager, Victam International BV. Both Mr Pornsil and Mr. Manat said that the Victam exhibitions and conferences had had significant continued on page 3 ➤➤ When the doors open at BITEC in Bangkok on the 29th March visitors from all over Asia/Pacific will find exhibition stands full of products and services directly relating to their industry. Inside your Spring issue 3 Who should visit the event? 4 Conference timetable 7 Conferences in detail 18 Innovation awards 20 The show venue – BITEC 22 All about Bangkok 27 Exhibitor previews section 42 Contact information BITEC Bangkok 29-31March 2016 Register as a visitor now! Free of charge! Go to: www.victam.com/?i=364 Innovation at centre of Asia’s premier Feed & Grain event

Upload: dr-khalid-shouq

Post on 11-Feb-2017

254 views

Category:

Business


1 download

TRANSCRIPT

Page 1: Showtime 21-1

Issue 1 . Volume 21 . Spring 2016

1Showtime

As Asia’s showpiece event for the animalfeed, dry petfood, aquafeed, grainprocessing, rice & flour milling and biomasspelleting industries these senior industryexecutives will also see many newproducts and services that are beinglaunched at the show.This was also the message at the recently

held press conference in Bangkok forFIAAP, VICTAM & GRAPAS Asia 2016:“Sustained growth of the size and influenceof the event. Innovations within the eventand the continued introduction of newproducts and services at the showpieceevent by the exhibitors”.

This theme was echoed by the principalspeakers at the press conference inBangkok: Mr. Pornsil Patchrintanakul –Chairman of the Federation of ASEANFeed Associations and President of theThai Feed Mill Association; Mr. ManatKitprasert – President of the Thai RiceMillers Association; Mr. Henk van de Bunt –General Manager, Victam International BVand Ms. Catelijne de Gooijer – VisitorPromotion and PR Manager, VictamInternational BV.Both Mr Pornsil and Mr. Manat said that

the Victam exhibitions and conferenceshad had significant continued on page 3 ��

When the doors open at BITEC in Bangkok on the 29th March visitors from all over Asia/Pacific will findexhibition stands full of products and services directlyrelating to their industry.

Inside your Spring issue3 Who should visit the event?4 Conference timetable7 Conferences in detail18 Innovation awards20 The show venue – BITEC22 All about Bangkok27 Exhibitor previews section42 Contact information

BITECBangkok29-31March2016

Register as a visitor now!Free of charge! Go to:www.victam.com/?i=364

Innovation at centre of Asia’s premier Feed & Grain event

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 1

Issue 1 . Volume 21 . Spring 2016

1Showtime

As Asia’s showpiece event for the animalfeed, dry petfood, aquafeed, grainprocessing, rice & flour milling and biomasspelleting industries these senior industryexecutives will also see many newproducts and services that are beinglaunched at the show.This was also the message at the recently

held press conference in Bangkok forFIAAP, VICTAM & GRAPAS Asia 2016:“Sustained growth of the size and influenceof the event. Innovations within the eventand the continued introduction of newproducts and services at the showpieceevent by the exhibitors”.

This theme was echoed by the principalspeakers at the press conference inBangkok: Mr. Pornsil Patchrintanakul –Chairman of the Federation of ASEANFeed Associations and President of theThai Feed Mill Association; Mr. ManatKitprasert – President of the Thai RiceMillers Association; Mr. Henk van de Bunt –General Manager, Victam International BVand Ms. Catelijne de Gooijer – VisitorPromotion and PR Manager, VictamInternational BV.Both Mr Pornsil and Mr. Manat said that

the Victam exhibitions and conferenceshad had significant continued on page 3 ��

When the doors open at BITEC in Bangkok on the 29th March visitors from all over Asia/Pacific will findexhibition stands full of products and services directlyrelating to their industry.

Inside your Spring issue3 Who should visit the event?4 Conference timetable7 Conferences in detail18 Innovation awards20 The show venue – BITEC22 All about Bangkok27 Exhibitor previews section42 Contact information

BITECBangkok29-31March2016

Register as a visitor now!Free of charge! Go to:www.victam.com/?i=364

Innovation at centre of Asia’s premier Feed & Grain event

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 1

Page 2: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 2

Page 3: Showtime 21-1

show news

3Showtime

�� beneficial influences on their industriesin Thailand and throughout Asia/Pacificand Southern Asia. The FIAAP, VICTAM &GRAPAS events have now become theshowpiece event throughout the region andwhere the industry meet to see the latestinnovations in products and services thatwere being introduced by the exhibitors atthe shows and by the speakers at themany conferences that are held during theevent. It is now Asia’s foremost event forthe feed and grain industries.

Inter-connected showsMr van de Bunt explained how the feedingredient and additive show, FIAAP worksso well in Bangkok as it relates to thesenior industry executives who visitVICTAM, their feed processing exhibition. Also how VICTAM relates to the rice and

flour milling and grain processing showGRAPAS. With these two shows it is theauxiliary equipment such as conveyors,elevators, silos, cooler/dryers, programsand more that are used within feed, flour,rice mills, grain processing plants andbiomass plants. Some of the multi-nationalsthat exhibit at FIAAP also produce additivesfor flour, etc. so here we also have arelationship between FIAAP and GRAPAS.He went on to say that over 200 of the

world’s leading suppliers to the feed andgrain industries will be present at theexhibitions that will be held at BITEC,Bangkok for 29 – 31 March in 2016.

Conferences and seminarsHenk also mentioned that during a previousmeeting with the Thai Department ofLivestock the subject of GMP had beendiscussed in detail and that the Departmentwas especially pleased that there will be afree seminar for all visitors devoted to thissubject on Wednesday, March 30th.It is not only within the exhibition halls

where you will learn about industryinnovations, but also in the conferencerooms. Respected industry speakers willaddress delegates from all over Asia, theytoo will look at innovations within yourindustry.All of the conferences will be held on Level

2 of BITEC. The titles of the conferencesare as follows:1. Aquafeed Horizons Asia 2. FIAAP Animal Nutrition Conference3. Petfood Forum Asia4. Global Milling Conference with

GRAPAS Asia5. Biomass Asia6. GMP+ Feed Safety AssuranceFurther detailed information on each of

these conferences is contained withincomprehensive articles on later pageswithin this magazine.During the press conference Mrs de

Gooijer, Victam’s new Visitor Promotionand PR Manager announced that theASEAN Feed Summit and also theASEAN Feed & Rice Symposium wouldtake place during the 2016 event. The Summit will be held in closed session

for all the Presidents and Secretary Generalsof the ASEAN Feed Associations under theChairmanship of Mr Pornsil Patchrintanakul.The ASEAN Feed & Rice Symposium isopen to all registered visitors and respectedauthoritative speakers from the FAO, ADM,International Feed Industry Federation andmore will address the audience on a widerange of topics.

Free entry to showsMs Catelijne then explained that entry tothe shows is free of charge and that theonline registration system is now open. Allyou need to do is go to www.fiaap.com,www.victam.com or www.grapas.euand click the free visitor registration buttonand complete the online forms.

The 2016 event is “A PARTNERSHIPIN SYNERGY” because the showsinter-connect.FIAAP – with animal feed ingredients &

additives is directly related to VICTAM –with animal feed processing & ancillaryequipment. Both shows attract visitorsfrom the feed industry.There is also a relationship between

VICTAM and GRAPAS – the show forrice & flour milling, grain processingtechnology & ancillary equipment. Of course grains of various kinds are

used within animal feeds, and much ofthe ancillary equipment found in a feedmill will also be found in a rice or flourmill. These include – storage systems,conveyors, bagging equipment,automation, computers systems andprograms and much more.This inter-relationship between these

sector profiles is a major reason for theevent’s attraction for mill owners/managers from South and SoutheastAsia and beyond.

If you are a:• CEO • Director • Mill owner • Mill manager • Purchaser • Nutritionist • Formulator • Veterinarian • Processor

From:• Animal feed mill • Aquafeed mill • Dry petfood manufacturer • Hatchery • Fish Farm • Integrator • Large livestock farm • Rice mill • Flour mill • Grain processor • Grain storage facility • Port authority • Food processor

Then you should:

Who should visit the event?

Register as a visitor now!Free of charge! Go to:www.victam.com/?i=364

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 3

show news

3Showtime

�� beneficial influences on their industriesin Thailand and throughout Asia/Pacificand Southern Asia. The FIAAP, VICTAM &GRAPAS events have now become theshowpiece event throughout the region andwhere the industry meet to see the latestinnovations in products and services thatwere being introduced by the exhibitors atthe shows and by the speakers at themany conferences that are held during theevent. It is now Asia’s foremost event forthe feed and grain industries.

Inter-connected showsMr van de Bunt explained how the feedingredient and additive show, FIAAP worksso well in Bangkok as it relates to thesenior industry executives who visitVICTAM, their feed processing exhibition. Also how VICTAM relates to the rice and

flour milling and grain processing showGRAPAS. With these two shows it is theauxiliary equipment such as conveyors,elevators, silos, cooler/dryers, programsand more that are used within feed, flour,rice mills, grain processing plants andbiomass plants. Some of the multi-nationalsthat exhibit at FIAAP also produce additivesfor flour, etc. so here we also have arelationship between FIAAP and GRAPAS.He went on to say that over 200 of the

world’s leading suppliers to the feed andgrain industries will be present at theexhibitions that will be held at BITEC,Bangkok for 29 – 31 March in 2016.

Conferences and seminarsHenk also mentioned that during a previousmeeting with the Thai Department ofLivestock the subject of GMP had beendiscussed in detail and that the Departmentwas especially pleased that there will be afree seminar for all visitors devoted to thissubject on Wednesday, March 30th.It is not only within the exhibition halls

where you will learn about industryinnovations, but also in the conferencerooms. Respected industry speakers willaddress delegates from all over Asia, theytoo will look at innovations within yourindustry.All of the conferences will be held on Level

2 of BITEC. The titles of the conferencesare as follows:1. Aquafeed Horizons Asia 2. FIAAP Animal Nutrition Conference3. Petfood Forum Asia4. Global Milling Conference with

GRAPAS Asia5. Biomass Asia6. GMP+ Feed Safety AssuranceFurther detailed information on each of

these conferences is contained withincomprehensive articles on later pageswithin this magazine.During the press conference Mrs de

Gooijer, Victam’s new Visitor Promotionand PR Manager announced that theASEAN Feed Summit and also theASEAN Feed & Rice Symposium wouldtake place during the 2016 event. The Summit will be held in closed session

for all the Presidents and Secretary Generalsof the ASEAN Feed Associations under theChairmanship of Mr Pornsil Patchrintanakul.The ASEAN Feed & Rice Symposium isopen to all registered visitors and respectedauthoritative speakers from the FAO, ADM,International Feed Industry Federation andmore will address the audience on a widerange of topics.

Free entry to showsMs Catelijne then explained that entry tothe shows is free of charge and that theonline registration system is now open. Allyou need to do is go to www.fiaap.com,www.victam.com or www.grapas.euand click the free visitor registration buttonand complete the online forms.

The 2016 event is “A PARTNERSHIPIN SYNERGY” because the showsinter-connect.FIAAP – with animal feed ingredients &

additives is directly related to VICTAM –with animal feed processing & ancillaryequipment. Both shows attract visitorsfrom the feed industry.There is also a relationship between

VICTAM and GRAPAS – the show forrice & flour milling, grain processingtechnology & ancillary equipment. Of course grains of various kinds are

used within animal feeds, and much ofthe ancillary equipment found in a feedmill will also be found in a rice or flourmill. These include – storage systems,conveyors, bagging equipment,automation, computers systems andprograms and much more.This inter-relationship between these

sector profiles is a major reason for theevent’s attraction for mill owners/managers from South and SoutheastAsia and beyond.

If you are a:• CEO • Director • Mill owner • Mill manager • Purchaser • Nutritionist • Formulator • Veterinarian • Processor

From:• Animal feed mill • Aquafeed mill • Dry petfood manufacturer • Hatchery • Fish Farm • Integrator • Large livestock farm • Rice mill • Flour mill • Grain processor • Grain storage facility • Port authority • Food processor

Then you should:

Who should visit the event?

Register as a visitor now!Free of charge! Go to:www.victam.com/?i=364

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 3

show news

3Showtime

�� beneficial influences on their industriesin Thailand and throughout Asia/Pacificand Southern Asia. The FIAAP, VICTAM &GRAPAS events have now become theshowpiece event throughout the region andwhere the industry meet to see the latestinnovations in products and services thatwere being introduced by the exhibitors atthe shows and by the speakers at themany conferences that are held during theevent. It is now Asia’s foremost event forthe feed and grain industries.

Inter-connected showsMr van de Bunt explained how the feedingredient and additive show, FIAAP worksso well in Bangkok as it relates to thesenior industry executives who visitVICTAM, their feed processing exhibition. Also how VICTAM relates to the rice and

flour milling and grain processing showGRAPAS. With these two shows it is theauxiliary equipment such as conveyors,elevators, silos, cooler/dryers, programsand more that are used within feed, flour,rice mills, grain processing plants andbiomass plants. Some of the multi-nationalsthat exhibit at FIAAP also produce additivesfor flour, etc. so here we also have arelationship between FIAAP and GRAPAS.He went on to say that over 200 of the

world’s leading suppliers to the feed andgrain industries will be present at theexhibitions that will be held at BITEC,Bangkok for 29 – 31 March in 2016.

Conferences and seminarsHenk also mentioned that during a previousmeeting with the Thai Department ofLivestock the subject of GMP had beendiscussed in detail and that the Departmentwas especially pleased that there will be afree seminar for all visitors devoted to thissubject on Wednesday, March 30th.It is not only within the exhibition halls

where you will learn about industryinnovations, but also in the conferencerooms. Respected industry speakers willaddress delegates from all over Asia, theytoo will look at innovations within yourindustry.All of the conferences will be held on Level

2 of BITEC. The titles of the conferencesare as follows:1. Aquafeed Horizons Asia 2. FIAAP Animal Nutrition Conference3. Petfood Forum Asia4. Global Milling Conference with

GRAPAS Asia5. Biomass Asia6. GMP+ Feed Safety AssuranceFurther detailed information on each of

these conferences is contained withincomprehensive articles on later pageswithin this magazine.During the press conference Mrs de

Gooijer, Victam’s new Visitor Promotionand PR Manager announced that theASEAN Feed Summit and also theASEAN Feed & Rice Symposium wouldtake place during the 2016 event. The Summit will be held in closed session

for all the Presidents and Secretary Generalsof the ASEAN Feed Associations under theChairmanship of Mr Pornsil Patchrintanakul.The ASEAN Feed & Rice Symposium isopen to all registered visitors and respectedauthoritative speakers from the FAO, ADM,International Feed Industry Federation andmore will address the audience on a widerange of topics.

Free entry to showsMs Catelijne then explained that entry tothe shows is free of charge and that theonline registration system is now open. Allyou need to do is go to www.fiaap.com,www.victam.com or www.grapas.euand click the free visitor registration buttonand complete the online forms.

The 2016 event is “A PARTNERSHIPIN SYNERGY” because the showsinter-connect.FIAAP – with animal feed ingredients &

additives is directly related to VICTAM –with animal feed processing & ancillaryequipment. Both shows attract visitorsfrom the feed industry.There is also a relationship between

VICTAM and GRAPAS – the show forrice & flour milling, grain processingtechnology & ancillary equipment. Of course grains of various kinds are

used within animal feeds, and much ofthe ancillary equipment found in a feedmill will also be found in a rice or flourmill. These include – storage systems,conveyors, bagging equipment,automation, computers systems andprograms and much more.This inter-relationship between these

sector profiles is a major reason for theevent’s attraction for mill owners/managers from South and SoutheastAsia and beyond.

If you are a:• CEO • Director • Mill owner • Mill manager • Purchaser • Nutritionist • Formulator • Veterinarian • Processor

From:• Animal feed mill • Aquafeed mill • Dry petfood manufacturer • Hatchery • Fish Farm • Integrator • Large livestock farm • Rice mill • Flour mill • Grain processor • Grain storage facility • Port authority • Food processor

Then you should:

Who should visit the event?

Register as a visitor now!Free of charge! Go to:www.victam.com/?i=364

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 3

Page 4: Showtime 21-1

4 Showtime

conferences

Conference timetable at-a-glanceTuesday 29th March 2016

Rooms 211/212/213

08:30 – 09:30 Registration plus welcome coffee and light breakfast

09:30 – 11:35 FIAAP Animal Nutrition Conference Asia 2016

11:35 – 13:00 Lunch break

13:00 – 15:00 FIAAP Animal Nutrition Conference Asia 2016

15:00 – 15:45 Coffee break

15:45 – 17:05 FIAAP Animal Nutrition Conference Asia 2016

Rooms 214/215

08:30 – 09:00 Registration

09:00 – 10:30 Aquafeed Horizons Asia 2016

10:30 – 11:00 Coffee break

11:00 – 13:00 Aquafeed HorizonsAsia 2016

13:00 – 14:00 Lunch break

14:00 – 15:00 Aquafeed HorizonsAsia 2016

15:00 – 15:30 Coffee break

15:30 – 17:00 Aquafeed HorizonsAsia 2016

Rooms 216/217

09:30 – 10:00 Welcome coffee

10:00 – 12:00 GRAPAS Asia 2016Session A: Flour Milling –Processing, Quality, Storage & Transportation

12:00 – 13:00 Lunch break

13:00 – 15:00 GRAPAS Asia 2016Session B: Rice Milling –Processing & Handling

15:00 – 15:15 Coffee break

15:15 – 17:30 GRAPAS Asia 2016Session C: Milling Innovation – Technology & Development

Rooms 220/221

10:30 – 17:30 Technical seminars

Wednesday 30th March 2016

Rooms 211/212/213

08:30 – 09:30 Registration plus welcome coffee and light breakfast

09:30 – 11:35 Petfood Forum Asia 2016

11:35 – 13:00 Lunch break

13:00 – 15:00 Petfood Forum Asia 2016

15:00 – 15:45 Coffee break

15:45 – 17:05 Petfood Forum Asia 2016

Rooms 214/215

14:00 – 17:00 2nd ASEAN Feed &Rice Symposium

Rooms 220/221

10:30 – 12:30 Technical seminars

12:30 – 13:00 Lunch break

13:00 – 15:00 GMP+ Feed Safety Assurance

15:00 – 15:40 Coffee break

15:30 – 17:30 Technical seminars

Thursday 31st March 2016

Rooms 211/212

09:00 – 10:30 Biomass ConferenceAsia 2016

10:30 – 11:00 Coffee break

11:00 – 12:30 Biomass ConferenceAsia 2016

12:30 – 13:30 Lunch break

13:30 – 14:30 Biomass ConferenceAsia 2016

14:30 – 15:00 Coffee break

15:00 – 16:00 Biomass ConferenceAsia 2016

Rooms 214/215

09:30 – 10:45 2nd ASEAN Feed Summit(Closed session)

10:45 – 11:00 Coffee break

11:00 – 12:30 2nd ASEAN Feed Summit(Closed session)

Rooms 220/221

10:30 – 15:30 Technical seminars

Timings may be subject to change

Don’t miss the free technical seminars from FOSS and BÜHLER

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 4

Page 5: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 5

Page 6: Showtime 21-1

6 Showtime

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 6

Page 7: Showtime 21-1

7Showtime

conferences

FIAAP Animal Nutrition ConferenceFrom information on industry trends, antibiotic alternatives and feed additives toovercoming regulatory hurdles, this conference will highlight profitable answers for today’spoultry & swine feeding challenges. By Terrence O’Keefe.

The demand for animal protein in Asiacontinues to grow along with thedisposable incomes of its consumers.Meeting this growing demand in amarketplace that is more concerned thanever about how poultry and livestock areraised and fed creates new challenges forproducers.

The 2016 FIAAP Animal NutritionConference will kick off with an exclusivesneak peek at Feed International’s WorldFeed Panorama, the publication’s annualsurvey of global compound feed productionvolumes. Jackie Roembke, editor of FeedInternational magazine, will present a lookat the drivers behind 2015’s biggest gainsand losses in feed production. The 2015results to this overview revealed someinteresting trends worldwide – butespecially in Asia.

To develop the technical conference,WATT Global Media’s Feed Internationalcalled on researchers, companies andorganizations to submit their mostcompelling findings. From the dozens ofabstract submissions, the technical portionof the FIAAP Animal Nutrition Conferencehas been narrowed to down to 10sessions. The following is an overview ofthe event’s program.

Alternatives to antibiotics in feedConcerns over antibiotic resistance inhuman medicine has fuelled concern overantibiotic use in food producing animals.Presentations on reductions in antibioticuse – as well as some antibiotic alternativesfor both poultry and swine – will behighlighted during the conference.Over the past 13 years, the EU has

significantly lowered its antibiotic use inlivestock production through the use ofalternative feed additives. As the issue

gains momentum in many other areas ofthe world, governments and retailers areputting reduction programs in place.Dominique Chavette, international poultrymarket manager, Invivo NSA, discusseshow livestock and feed producers canprepare for future antibiotic reductionprograms. Post-weaning is a key period in a piglet’s

life with a decisive impact on fatteningprofitability, but it is also the most stressfulstage. Such stress often leads to healthdisorders; a substantial use of antibiotics;and an increased production cost. Properlyfilling the piglet’s nutritional needs is the firstcriterion to meet when looking to maximizeits growth and secure its health whilereducing antibiotics usage. Laurent Roger,head of swine department, CCPA Groupdiscusses how post-weaning oxidative andinflammation stresses lead to physiologicalreactions and require very specificformulation needs. This talk evaluates theeffects of those stresses and determines

how they can be controlled through aspecific feeding strategy.Dr. Elias Hossain’s research indicates that

the addition of probiotics and green tea inbroiler diets can serve as antibioticalternatives while achieving similar desiredeffects. His work at Bangladesh AgriculturalUniversity found improved growthparameters, internal organs changes andreduced microbial population. Lars Sangill Andersen, nutritionist, HamletProtein A/S, will examine the methodsbehind the success of Danish nutritionists ineliminating antibiotic growth promoters(AGP) from piglet diets. Outlining feedformulation challenges, Andersen willdiscuss the options available to achievesimilar results that producer’s experiencewith AGPs through the use of zinc and zincoxide.Dr. Srijit Tripathi, senior product executive

– exports, Ayurvet Limited, will discuss therole polyherbals can play in replacingantibiotics in poultry rations. ��

at-a-glance

Date: March 29, 2016

Time: 9:30am – 5:10pm

Location: BITEC, Bangkok, Thailand

Amenities: Coffee breaks and lunch will be provided

About: The 7th FIAAP Conference is held in conjunction with VICTAM Asia

Website: www.fiaap-conferences.com

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 7

6 Showtime

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 6

Page 8: Showtime 21-1

8 Showtime

conferences

His presentation explores the usepolyherbals as natural growth promotersagainst antibiotics in feed formulations andhow they can be used to improve foodsafety and hygienic poultry production.

Feed ingredients offer cost-effective solutionsAccording to recent research, soluble fibrecontributes negatively to wet litter issuesand behavioural disorders in poultryoperations. In contrast, insoluble fibre hasa positive impact in these areas andcontributes to improved layer and broilerperformance. A potential explanation forthese positive observations is related to theeffect of insoluble fibre on gizzard size anddigesta viscosity. Manfried Pietsch, JRSBusiness Unit Animal Nutrition, examinesrecent findings on this topic – as well asstress-related symptoms – and theirinfluence on broiler breedersEnergy and amino acids are the two

nutrients with highest contribution to theprice of broiler feed. Nowadays, amino acidintake seems to lead broiler performancebut the effect varies according the dietaryenergy level. Jonde los Mozos, poultryresearcher, Trouw Nutrition, discusses howmodelling broiler performance based onvariations of these key nutrients could help

the nutritionist optimize feeding programsbased on business margins.The benefits of spray-dried plasma (SDP)

in the feed of young pigs is well known.Nevertheless some producers becamereluctant to apply plasma due to concernsabout virus safety. Dr. Lourens Heres,technical support manager, Sonac, willexplore the research surrounding thedifferent processing steps found to kill anentire range of relevant viruses. Dr. Choi Siyeong, regional technical

manager – swine, BIOMIN Singapore,presents research on the impact ofsupplementation of diets ofgrowing/finishing pigs with phytogenicfeed additives (PFA). Overall, thesupplementation of a PFA improved theperformance of pigs and a protein reductionin the diet has been efficiently compensatedfor through the supplementation of PFA.

Overcoming regulatory hurdlesin AsiaIn Asia, an ever-increasing demand foranimal protein products presents a greatchallenge. Feed technology can improvethe efficiency of animal protein productionand thus help to limit environmental impactof livestock production. Cargill’s Thaddeo A.Sookcharoen’s presentation will offer insight

into obtaining access to these marketswhile facing the diversity of regulatoryrequirements across the Asia region.

About FIAAPFIAAP exhibitions and conferences coverthe ingredients and additives used withinthe formulation of animal feeds and areattended by senior executives from all overthe world. The conference is gearedtoward the interests of nutritionists,veterinarians, feed formulators, CEOs, feedmills directors, integrators, co-operatives,hatcheries, etc. The 7th annual FIAAP Animal Nutrition

Conference will take place March 29, 2016in Bangkok, Thailand, and will be co-located with VICTAM Asia together withAquafeed Horizons Conference andPetfood Forum Asia. The 2016 VICTAMAsia event combines the FIAAP, VICTAMand GRAPAS exhibitions (and theirrespective conferences) under one roof atBangkok International Trade & ExhibitionCentre (BITEC) in Bangkok, Thailand,March 29 – 31.

Registration detailsFor more information or to register for theFIAAP Animal Nutrition Conference, visitwww.fiaap-conferences.com

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 8

Page 9: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 9

Page 10: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:10 Page 10

Page 11: Showtime 21-1

11Showtime

The 9th Aquafeed Horizons Asia will takeplace March 29th, 2016 at the BITEC, onthe first day of the FIAAP/VICTAM/GRAPASAsia 2016 shows. The conference isdesigned for commercial aquaculture feedmanufacturers and others wanting to learnabout the latest formulation and processingsolutions available for producing aquaticfeeds.

Fishmeal substitution and a general trendtowards plant-based feed ingredients willdrive the agenda for the 2016 meeting: theimplications of these changes in traditionaldiets for both processors and formulatorswill be explored by an international line-up ofexperts from industry and applied science.

Organisers and registration detailsAquafeed Horizons Asia is organised byAquafeed.com, the aquaculture feedinformation resource since 1998, offeringfree websites, magazines and newslettersin support of the industry, as well asconferences, workshops and technicalconsulting.Online pre-registration is required for a

secure place. More information andregistration at: feedconferences.com

Aquafeed Horizons AsiaImplications forincorporation of non-traditional ingredients auniting theme for Aquafeed conference.

Conference Program

Interactions of extrusion and ingredients for aquatic feedsJoseph P. Kearns, Vice President Aqua-Feed Div., Wenger Manufacturing, Inc., USA

Durable sinking fish feed with low starch formulations and an example with insect meal as alternative proteinUrs Wüst, Product Management Aquafeed & Petfood, Business Unit Nutrition, Bühler AG,Switzerland

Process control in aquafeed productionOlafur H Jonsson, Managing Director, Tovalia sarl, France

Pre-processing of feedstuffs to improve their feeding value for aquaculture feedsDr. Dominique P. Bureau, Professor, University of Guelph, Canada

Feed for the future: The challenges and opportunities for a better and sustainable aquaculture industryDr. M A Kabir Chowdhury, Global Product Manager – Aquaculture, Jefo Nutrition Inc.,Canada

Advances in amino acid nutrition of shrimpDr. Alexandros Samartzis, Regional Technical Sales Manager, Evonik (SEA), Singapore

GART as a platform to investigate disease control strategies against AHPND/EMS in shrimpDr. ir. Margriet Drouillon, Business Developer Aqua, University of Ghent, Belgium

Effect of an algo-clay based biocatalyst on the digestive and growth performance of juvenile shrimp (Litopenaeus vannamei)Maarten Jay van Schoonhoven, Aqua BU manager, Olmix, France

Functional feeds: Bad bug busters to reduce the impact from disease in farmed fish and shrimpDr. Peter Coutteau, Business Unit Manager – Aquaculture, Nutriad International NV,Belgium

Plant extracts in aquaculture feeds: From modes of action to practical applicationClementine Oguey, Aqua Product Expert, PANCOSMA & Associates, Switzerland

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 11

Page 12: Showtime 21-1

12 Showtime

Global Milling Conference with GRAPAS Asia

conferences

GRAPAS, which represents the grain (flour),rice and pasta milling sectors of ourindustry, is gaining much greater recognitionin its own right among exhibitors. Twenty-five percent of exhibitors are displayingproducts and services for the FIAAP sideof the exhibition.“While many exhibitors still refer to the

event as VICTAM Asia, it is clear from theirproduct line-up that they are also exhibitingto millers,” Henk van de Bunt, the CEO ofVictam International which is responsiblefor hosting the co-located events, told theGRAPAS Conference organizer RogerGilbert of Milling and Grain magazine.

The GRAPAS Asia Conference is animportant activity that is helping to developthe milling focus for the whole event, headded.It will be the fourth time Milling and Grain –

formerly known as Grain and Feed MillingTechnology magazine – will be hosting theevent on behalf of the exhibition organizers.“At this event we are firmly supporting the

development of a one-day conference forflour, rice and pasta millers and all thoseinvolved in these sectors,” says Mr. Gilbert.“We have made several trips to countries

in Asia this year, including Thailand,

Indonesia, Taiwan, China, The Philippinesand the Middle East, and have beenpromoting this one-day conference as aunique meeting point for millers throughoutthe region,” he adds.“It is obvious to us that there is little

opportunity for millers, particularly rice andflour millers, to meet. The GRAPAS eventprovides an ideal venue and is easy for allcountries throughout the rejoin to meet.“Many of Asia’s largest cities are

congested, by with Bangkok’s ‘Skytrain’travelling from the city to the exhibition areaat BITEC is easy and comfortable.”

The aims of the conferenceKeeping firmly in mind the need to provideinformation and new ideas in a timely andefficient way, the 2016 Global Milling &GRAPAS Conference Asia will be held onthe first day of the exhibition – Tuesday,March 29, 2016 from 10:00-17:00 – inthree parts; one morning and twoafternoon sessions. “What awaits millers on their arrival at the

exhibition on the first day, is a conferenceprogramme that should fit with their busyschedule,” says Mr. Gilbert.“We have again split the conference into

three separate sessions focusing on food,flour and rice, from the control of rawmaterial and product quality at each stepof the milling process. This format willmake it easier for attendees to step in andout of the conference to suit their needs onwhat will be a busy show day," saysorganiser Roger Gilbert.“Our sessions will focus on three area of

rice, flour and innovation,” he adds.“We will have an opening presentation to

set the scene from Thailand’s point of viewand will focus on rice and rice qualitydevelopments for millers.”

The three sessions will cover:Session A: Flour Milling – Processing,Quality, Storage & TransportationSession B: Rice Milling – Processing andHandlingSession C: Milling Innovation – Technology& DevelopmentThe range of topics being addressed by

the programme include:• Sustainable and energy efficient milling

systems • Storing rice to protect its quality• Efficient milling – premium end products

Two-thirds of all exhibitorsat the upcomingVICTAM/FIAAP/GRAPASAsia 2016 exhibitions, co-located at the BITEC inBangkok, Thailand, fromMarch 29 – 31, 2016, haveregistered products fordisplay under the GRAPAS– or milling – banner.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 12

Page 13: Showtime 21-1

13Showtime

• Extrusion technology – processing rice• Organic rice – rice products for a healthy

life• New analytical methods for rice and flour • Colour sorting – the full benefits and

what cost• Plant solutions – from grain to noodles

and pasta• Rice and flour fortification - the cost of

implementation

The detailThe conference will be in English withsimultaneous translation into/from Thai.Morning and afternoon coffee andrefreshments will be provided (but notlunch).

There is a participation fee ofUS$10/person: registering can be made onspot in either US$ or equivalent currenciesor in advance, online atwww.gfmt.co.uk/grapas. “We are expecting between 100 – 200

delegates over the course of the day. Wewould prefer delegates to sign up onlinebefore attending so that we can preparename badges and an information pack.“We will be offering the first 50 who sign

up a free copy of our 2016 InternationalMilling and Grain Directory that has justbeen published. All of the first 100

attendees who register online will receive acomplimentary 12-month subscription toMilling and Grain” he adds.There will be an opportunity for attendees

to meet with speakers and other delegatesduring the coffee breaks.Pre-registered attendees will receive a

‘Certificate of Attendance’ at the end ofthe day.

The backgroundGRAPAS, the exhibition hosted by VictamInternational, runs alongside its VICTAMand FIAAP exhibitions in Bangkok, Thailand(from March 29 – 31, 2016) at the BangkokInternational Trade and Exhibition Centre(BITEC). Perendale Publishers Limited –the publishers of the International MillingDirectory and the long-standing Milling andGrain magazine – is the chosen patron ofthe GRAPAS Conference and the sponsorof the 2016 GRAPAS Awards.

Our sponsorsThe GRAPAS Conference Asia organiserswould like to thank the generosity ofsponsors who have supported the event inthe past and are again supporting the 2016event. They include: Muyang, China; TexasA&M, USA; Bühler Group, Switzerland;Amandus Khal, Germany; Silos Cordoba,

Spain; Perten, Sweden; AgentisInnovations, Thailand; the MarketingOrganisation for Thai Farmers; Thai RiceMillers Association and the Ministry ofAgriculture, Thailand.

Don’t forgetA large number of companies at theVICTAM/FIAAP/GRAPAS co-locatedexhibition will be exhibiting the essentialancillary equipment that is so necessary forthe smooth operation of a flour mills andrice mills. GRAPAS also covers, in addition to grain

processing, storage and transportationplus flour and rice milling technologies, aswell as, pasta, breakfast cereal andextruded snack production. GRAPAS also displays ancillary equipment

that is found within a mill, but its maincoverage is for specialist systems andtechnology used within rice & flour mills,together with additional exhibits for grainstorage, preservation and transportation.The show also profiles noodle, breakfastcereals and extruded snack production.“Guaranteeing food safety and food

availability through the greater use oftechnology in the milling process in food,flour and rice processing,” is our keyobjective,” Mr Gilbert concludes.

conferences

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 13

Page 14: Showtime 21-1

14 Showtime

conferences

Petfood Forum AsiaFrank Yiannas (pictured right), vice president of food safety for Walmart, headlines roster of expert speakers for exclusive pet food conference on 30th March 2016.

Frank Yiannas, Walmart’s vice president offood safety, will be the opening speaker forPetfood Forum Asia 2016. After hispresentation on developing a food safetyculture, other industry experts will sharetheir latest research and insights on thedynamic Asia pet food market, pet nutritionand pet food ingredients, safety andprocessing.During Petfood Forum Asia, now in its fifth

edition, participants will enjoy valuablenetworking opportunities with peers fromthroughout Southeast Asia and the world. With countries in Asia such as Thailand,

China, South Korea and Taiwan among thefastest growing pet care markets globally,and Japan one of the largest pet caremarkets, this region is important andattractive to pet food businesses andprofessionals. Petfood Forum Asia 2016offers a unique chance to learn about theregion and how to join in its growth.

Conference ProgramFollowing is the schedule and line-up of topics and speakers as of press time.

08:30 – 09:30 Registration and check-in with coffee and light breakfast

09:30 – 10:15 Opening session: Why pet food manufacturers should develop a food safety cultureFrank Yiannas, vice president of Food Safety for Walmart Inc., discusses his work with behaviour-based food safety, how pet food companies can adopt these principles and why they should.

10:15 - 10:55 Pet food dynamics: update on the global and Asian marketsMariko Takemura, lead analyst for Euromonitor International, addresses developments in the dynamic, rapidly growing Asian pet food market, as as well as globally, focusing on current market trends and future prospects.

10:55 – 11:35 What’s bugs got to do with it? Understanding the relevance of changes in GI microbes for pet healthEmma Bermingham, PhD, senior scientist with AgResearch Ltd., shares research that has, for the first time, integrated intestinal microbiota with physiological parameters in carnivores, helping to gain better insight into the effects of diet on pet health.

11:35 – 13:00 Lunch

13:00 – 13:40 Fish-based ingredients for pet food manufacturingAndrew Mallison, general director of IFFO Ltd., provides an update, with global production and market data, on the impact of developments in fisheries management, oceanographic monitoring, environmental sustainability certification, long-chain omega-3 fats and social standards.

13:40 – 14:20 Drivers of liking of dry dog food appearance: Thai consumersKadri Koppel, PhD, assistant professor for Kansas State University’s Department of Human Nutrition, offers results of a study to determine the shape, size and colour of dry dog food that Thai consumers prefer and how that compares to data from Poland and the US.

14:20 – 15:00 From birth to bowl: the life of a tasty and safe pet foodIsabelle Guiller, global research and innovation director for Diana Pet Food, explains how to identify relevant indicators of pet food palatability, freshness and safety, based on results of several complementary studies. The research can help define safe, good practices to follow during the manufacturing process.

15:00 – 15:45 Coffee break

15:45 - 16:25 Automating critical tasks in pet food productionGalen Rokey, director of process technology for Wenger Manufacturing’s Companion Animal Division, discusses disruptive innovations that pet food manufacturers can use to automate previously manual tasks, helping eliminate variation in processes and product, and speed up sampling and testing times.

16:25 - 17:05 Optimum vitamin nutrition for dogs and catsJeff Alix, global pet nutrition marketing manager for DSM Nutritional Products, explores recent searches into published and unpublished data to identify true optimum vitamin fortification levels needed to support the optimum health and well-being of dogs and cats.

Above: At Petfood Forum Asia, industryexperts will share their latest research andinsights on the dynamic Asia pet foodmarket, pet nutrition and pet foodingredients, safety and processing.

Petfood Forum Asia updatesComplete details plus registration savings:www.petfoodforumevents.com

Asia-Pacific pet food marketwww.petfoodindustry.com/articles/5079

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 14

Page 15: Showtime 21-1

15Showtime

conferences

GMP+ Feed SafetyAssurance CertificationOpportunities in the entire feed chain with GMP+ certification.

In the coming decades, the worldpopulation will grow to about nine billionpeople. At the same time, the welfare levelis rising throughout the world. This resultsin more demand for safe animal productssuch as meat, dairy products and eggs.More feed materials are needed for moreproduction of animal protein. The feedmaterial suppliers experience it by increasingdemand and export. At the same time,they are faced with increasing demand fordemonstrable control of feed & food safety.

GMP+ International has the most suitabletool for the feed business to cope with thenew challenges in the export markets aswell as domestically.

The GMP+ Feed Certification schemedoes not only define conditions relating toproduction facilities of feed, but also forstorage, transport, staff, procedures,documentation etc. Together with herpartners, GMP+ International transparentlydefines clear conditions, so that feed safetyand sustainability are guaranteed andcertification bodies can conductindependent audits. GMP+ certifiedcompanies are supported with useful andpractical information, such as variousdatabases, newsletters, Q&A lists, coursesand seminars.With over 14,500 participating companies

in more than 70 countries, GMP+

International is a leading global player in themarket of feed safety assurance certification.A GMP+ certificate provides an additionalqualitative guarantee for every entrepreneurdealing with the international feed industry.A quality mark of GMP+ International tells

you, the entrepreneur, that participatingcompanies from the international food chainguarantee reliability, quality, sustainabilityand safety. That means that they meet alllocal and international statutory standardsin the feed industry.Join us during VICTAM Asia on March

30th 2016. For more information andregistration, check our website:www.gmpplus.org and go to seminars.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 15

Page 16: Showtime 21-1

16 Showtime

conferences

Meeting demand forbiomass pellets

Whilst the European Union(EU) is currently the largestconsumer and producer ofwood pellets, NorthAmerica is soon expectedto become the largestproducer. South East Asiaon the other hand is rapidlyemerging as a significantmarket for industrial gradebiomass pellets alreadyaccounting for 10 percentof global pellet demand.

South East Asia (SEA) is fast becoming adestination for traded biomass pellets, inparticular South Korea and Japan.Projections from forest industry consultantsPöyry Consulting suggest that the demandin SEA for biomass pellets could overdouble that of 2014 to reach around 10million tonnes by 2025. Key drivers for these forecasts are the

various renewable energy policies that arein place designed to stimulate theincreased use of biomass.

Fast but volatileSouth Korea is currently the largest pelletmarket in the region with the RenewablePortfolio Standard (RPS) requiring Koreanpower generating companies (genco’s) toreach 4 percent renewable power by 2015and 10 percent by 2022. For several genco’s the option has been

to co-fire imported industrial grade pellets,including EFB-pellets, with coal. In 2014the country imported almost 1.9 milliontonnes of which 75 percent came fromwithin the region (Vietnam, China,Malaysia, Thailand, Indonesia and Japan).This represents remarkable growth giventhat imports in 2012 were just shy of125 000 tonnes. Supply has been facilitated by spot

contracts awarded through a tenderprocess instead of longer off-takeagreements. Future growth is howeverconstrained by a 30 percent cap on theshare of the RPS that can be met using

biomass and whilst demand has declinedto around 1.3 million tonnes 2015, it isexpected to least double to around 2.7million tonnes by 2020.

Slow but steadySince the Fukushima tsunami disaster inMarch 2011, Japan has been fast-trackingits renewable energy portfolio setting arenewable energy target of between 25percent and 35 percent of total powergeneration by 2030. One key policy component for Japanese

power utilities is a feed-in tariff (FIT)programme. This programme obligatesutilities to purchase power generatedfrom renewable energy at a fixed pricefor a fixed period of time, currently20 years. The FIT rates are determined every

fiscal year, April 1 – March 31, and arestimulating investments in both newdedicated biomass power plant projectsas well as co-firing in existing coal-firedplants. Although Japan is a forest richcountry, like Korea it too has limited ownproduction of wood pellets relying insteadon imports. Pellet imports to Japan thus far have

been very modest climbing from around70 000 tonnes in 2012 to just under 100000 tonnes in 2014. However unlikeKorean counterparts, Japanese utilitiesprefer long-term off-take agreements,typically ten years with a fixed price with asimple annual escalator.

The big unknownFor China, the world’s largest energymarket and the world’s largest coalconsumer, the situation is less clear andmore complex. The government has set atarget of 15 percent energy fromrenewable sources including a sub-targetof 30 GW installed biomass powercapacity by 2020. Furthermore the Action Plan on

Prevention and Control of Air Pollutionissued by the China State Council in 2013,aims to replace some 450 000 coal-firedboilers with alternative sources such asbiomass whereas the National EnergyAdministration (NEA) is rumoured to set amore ambitious target in its 13th five-yeardevelopment plan for biomass energy – touse up to 50 million tonnes of wood pelletsand biomass briquettes by 2020. The majority of these biomass fuels are to

be produced in China. If so it is a herculeanundertaking; the global wood pelletproduction is currently about 28 milliontonnes per annum, China’s own productionis estimated to be somewhere between300 000 and 800 000 tonnes and only asymbolic volume of wood pellets, less than10 000 tonnes, were imported 2014. Be all that as it may, clear is that the

demand for biomass fuels in the region willcontinue to increase suggesting ampleinvestment opportunities for those withsuitable biomass residue streams in thewood, feed, grain or palm oil industries forthe production of industrial grade pellets.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 16

16 Showtime

conferences

Meeting demand forbiomass pellets

Whilst the European Union(EU) is currently the largestconsumer and producer ofwood pellets, NorthAmerica is soon expectedto become the largestproducer. South East Asiaon the other hand is rapidlyemerging as a significantmarket for industrial gradebiomass pellets alreadyaccounting for 10 percentof global pellet demand.

South East Asia (SEA) is fast becoming adestination for traded biomass pellets, inparticular South Korea and Japan.Projections from forest industry consultantsPöyry Consulting suggest that the demandin SEA for biomass pellets could overdouble that of 2014 to reach around 10million tonnes by 2025. Key drivers for these forecasts are the

various renewable energy policies that arein place designed to stimulate theincreased use of biomass.

Fast but volatileSouth Korea is currently the largest pelletmarket in the region with the RenewablePortfolio Standard (RPS) requiring Koreanpower generating companies (genco’s) toreach 4 percent renewable power by 2015and 10 percent by 2022. For several genco’s the option has been

to co-fire imported industrial grade pellets,including EFB-pellets, with coal. In 2014the country imported almost 1.9 milliontonnes of which 75 percent came fromwithin the region (Vietnam, China,Malaysia, Thailand, Indonesia and Japan).This represents remarkable growth giventhat imports in 2012 were just shy of125 000 tonnes. Supply has been facilitated by spot

contracts awarded through a tenderprocess instead of longer off-takeagreements. Future growth is howeverconstrained by a 30 percent cap on theshare of the RPS that can be met using

biomass and whilst demand has declinedto around 1.3 million tonnes 2015, it isexpected to least double to around 2.7million tonnes by 2020.

Slow but steadySince the Fukushima tsunami disaster inMarch 2011, Japan has been fast-trackingits renewable energy portfolio setting arenewable energy target of between 25percent and 35 percent of total powergeneration by 2030. One key policy component for Japanese

power utilities is a feed-in tariff (FIT)programme. This programme obligatesutilities to purchase power generatedfrom renewable energy at a fixed pricefor a fixed period of time, currently20 years. The FIT rates are determined every

fiscal year, April 1 – March 31, and arestimulating investments in both newdedicated biomass power plant projectsas well as co-firing in existing coal-firedplants. Although Japan is a forest richcountry, like Korea it too has limited ownproduction of wood pellets relying insteadon imports. Pellet imports to Japan thus far have

been very modest climbing from around70 000 tonnes in 2012 to just under 100000 tonnes in 2014. However unlikeKorean counterparts, Japanese utilitiesprefer long-term off-take agreements,typically ten years with a fixed price with asimple annual escalator.

The big unknownFor China, the world’s largest energymarket and the world’s largest coalconsumer, the situation is less clear andmore complex. The government has set atarget of 15 percent energy fromrenewable sources including a sub-targetof 30 GW installed biomass powercapacity by 2020. Furthermore the Action Plan on

Prevention and Control of Air Pollutionissued by the China State Council in 2013,aims to replace some 450 000 coal-firedboilers with alternative sources such asbiomass whereas the National EnergyAdministration (NEA) is rumoured to set amore ambitious target in its 13th five-yeardevelopment plan for biomass energy – touse up to 50 million tonnes of wood pelletsand biomass briquettes by 2020. The majority of these biomass fuels are to

be produced in China. If so it is a herculeanundertaking; the global wood pelletproduction is currently about 28 milliontonnes per annum, China’s own productionis estimated to be somewhere between300 000 and 800 000 tonnes and only asymbolic volume of wood pellets, less than10 000 tonnes, were imported 2014. Be all that as it may, clear is that the

demand for biomass fuels in the region willcontinue to increase suggesting ampleinvestment opportunities for those withsuitable biomass residue streams in thewood, feed, grain or palm oil industries forthe production of industrial grade pellets.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 16

16 Showtime

conferences

Meeting demand forbiomass pellets

Whilst the European Union(EU) is currently the largestconsumer and producer ofwood pellets, NorthAmerica is soon expectedto become the largestproducer. South East Asiaon the other hand is rapidlyemerging as a significantmarket for industrial gradebiomass pellets alreadyaccounting for 10 percentof global pellet demand.

South East Asia (SEA) is fast becoming adestination for traded biomass pellets, inparticular South Korea and Japan.Projections from forest industry consultantsPöyry Consulting suggest that the demandin SEA for biomass pellets could overdouble that of 2014 to reach around 10million tonnes by 2025. Key drivers for these forecasts are the

various renewable energy policies that arein place designed to stimulate theincreased use of biomass.

Fast but volatileSouth Korea is currently the largest pelletmarket in the region with the RenewablePortfolio Standard (RPS) requiring Koreanpower generating companies (genco’s) toreach 4 percent renewable power by 2015and 10 percent by 2022. For several genco’s the option has been

to co-fire imported industrial grade pellets,including EFB-pellets, with coal. In 2014the country imported almost 1.9 milliontonnes of which 75 percent came fromwithin the region (Vietnam, China,Malaysia, Thailand, Indonesia and Japan).This represents remarkable growth giventhat imports in 2012 were just shy of125 000 tonnes. Supply has been facilitated by spot

contracts awarded through a tenderprocess instead of longer off-takeagreements. Future growth is howeverconstrained by a 30 percent cap on theshare of the RPS that can be met using

biomass and whilst demand has declinedto around 1.3 million tonnes 2015, it isexpected to least double to around 2.7million tonnes by 2020.

Slow but steadySince the Fukushima tsunami disaster inMarch 2011, Japan has been fast-trackingits renewable energy portfolio setting arenewable energy target of between 25percent and 35 percent of total powergeneration by 2030. One key policy component for Japanese

power utilities is a feed-in tariff (FIT)programme. This programme obligatesutilities to purchase power generatedfrom renewable energy at a fixed pricefor a fixed period of time, currently20 years. The FIT rates are determined every

fiscal year, April 1 – March 31, and arestimulating investments in both newdedicated biomass power plant projectsas well as co-firing in existing coal-firedplants. Although Japan is a forest richcountry, like Korea it too has limited ownproduction of wood pellets relying insteadon imports. Pellet imports to Japan thus far have

been very modest climbing from around70 000 tonnes in 2012 to just under 100000 tonnes in 2014. However unlikeKorean counterparts, Japanese utilitiesprefer long-term off-take agreements,typically ten years with a fixed price with asimple annual escalator.

The big unknownFor China, the world’s largest energymarket and the world’s largest coalconsumer, the situation is less clear andmore complex. The government has set atarget of 15 percent energy fromrenewable sources including a sub-targetof 30 GW installed biomass powercapacity by 2020. Furthermore the Action Plan on

Prevention and Control of Air Pollutionissued by the China State Council in 2013,aims to replace some 450 000 coal-firedboilers with alternative sources such asbiomass whereas the National EnergyAdministration (NEA) is rumoured to set amore ambitious target in its 13th five-yeardevelopment plan for biomass energy – touse up to 50 million tonnes of wood pelletsand biomass briquettes by 2020. The majority of these biomass fuels are to

be produced in China. If so it is a herculeanundertaking; the global wood pelletproduction is currently about 28 milliontonnes per annum, China’s own productionis estimated to be somewhere between300 000 and 800 000 tonnes and only asymbolic volume of wood pellets, less than10 000 tonnes, were imported 2014. Be all that as it may, clear is that the

demand for biomass fuels in the region willcontinue to increase suggesting ampleinvestment opportunities for those withsuitable biomass residue streams in thewood, feed, grain or palm oil industries forthe production of industrial grade pellets.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 16

Page 17: Showtime 21-1

17Showtime

show news

Victam celebrating 25 years in AsiaVictam to celebrate their 25th anniversaryof events in Asia during the 2016 show.

The first Victam show was in an hotel car park and now it hasprogressed to the magnificent, modern, air conditioned halls in BITEC in Bangkok. The shows have grown from a few

hundred m2 in1991 to thousands of m2 in 2016 and that will now be the largest Victam show in Asia. Originally there were about 80 small exhibition stands, now it has grown to well over 200 exhibitors from all over the world and many with very large stands full of equipment and staff. This was to be expected as it reflects

the incredible growth of the feed and grain industries throughout the Asia/Pacific region over this period andin the future, this is also reflected in the growth of both the showsand the supporting conferences. Victam will be organising a number of celebratory events during

the show period.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 17

Page 18: Showtime 21-1

18 Showtime

awards

Innovation Awards 2016Aquafeed Innovation AwardAt each FIAAP/VICTAM/GRAPAS tradeshow, Aquafeed.com, the informationresource for the worldwide aquaculture feedindustry, looks forward to seeing what newingredients and technology the exhibitorshave to offer the aquaculture feed industry. Aquaculture is a relatively new part of the

feed industry: it is exciting, complex andrapidly evolving. Aquafeed advances areoften led by the engineers and scientists inthe nutrition and machinery companies.Their contribution to the development ofthe world’s fastest growing feed segmentis significant. Aquafeed.com recognizesand honours the valuable contribution thatthese companies make with the AquafeedInnovation Award. This prestigious award is presented to an

exhibitor at FIAAP/VICTAM/GRAPAS.Winners have included Wenger, GeelenCounterflow and Dr. Eckel. In 2015, it wasthe iScan IM from Tovalia Intelscan ofFrance, that impressed the panel of judges.This product measures exact density ofindividual extruded pellets, provides online

and continuous measurements of the pelletsize to monitor the performance of theextruder and even the shininess of thepellets to determine oil absorption. Thesystem had already proved its performancein the aquaculture industry as it has beenused to measure and count live salmon fryas they are pumped rapidly from one tankto another. Visitors to FIAAP/VICTAM/GRAPAS Asia

2016 can hear the managing director ofTovalia, Olafur Jonsson speak at theAquafeed.com conference, AquafeedHorizons Asia, taking place on the first dayof the trade show.“If you have a product on show at

FIAAP/VICTAM/GRAPAS Asia 2016 thatcreates significant benefit to themanufacture of aquafeed in terms ofinnovation, efficiency, profitability, safety orsustainability that was introduced to themarket after 1st January 2014, we want tohear about it”, Aquafeed.com publisher,Suzi Dominy said. “Fill out the form in theexhibitor manual as soon as possible – thecut off is 15th January 2016”.

All About Feed Innovation AwardAll About Feed, in association with Victam,is again organising the prestigious animalnutrition award (pictured above). We invitecompanies to send in their innovations thatmade an impact on the world of animalnutrition and ingredients. The entries will beranked on their relevance and value to thefeed industry. The winner of this award willbe granted to the most striking innovationson show at FIAAP & VICTAM Asia 2016,held 29 – 31 March in Bangkok, Thailand.All nominations will be named on thewebsite of All About Feed. All entries aresubject to the utmost confidentially untilpublication. Companies can send in their feed

ingredient and/or feedstuff and/or nutritiontechnology for animal feed and/or petfoodbefore February 1st 2016. To participate inthis contest, the innovation or new producthas to be: introduced to the market after1st January 2014; a contribution to theindustry; of high practical value and yourcompany has to be present at the showwith a booth. At the last FIAAP & VICTAM Asia in 2014,

Biomin was the big winner with theirproduct Fuzyme®, the first purified enzymeused to detoxify mycotoxins in animals andwas successfully introduced to the Asianmarket in March 2013. At the VICTAMInternational 2015, the award went to Adifofor their new concept: One tool –MultiModel – MultiSpecies. All About Feed is part of Reed Business

Information and we are also present with abooth and internet café at VICTAM Asia.We are looking forward to meeting youthere. As multi media experts we knowOlafur Jonsson, managing director of Tovalia, with the 2015 Aquafeed Innovation Award.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 18

Page 19: Showtime 21-1

19Showtime

awards

that to reach your target audience in theInternational Agri Industry market, you needthe right combination of media, access toyour target market, timing and creativity.

Reed Business Information is the rightpartner, with well-known brands as AllAbout Feed, Dairy Global, Pig Progressand World Poultry. At VICTAM Asia, ourskilled team of editors and accountmanagers will be present to discuss theoptions for your business and to makeyour communication plan a successful one. For more information about the brands

and to contact us directly, please visitwww.rbiagri.net.

The GRAPAS Innovation AwardOver the past few years, between theFIAAP/VICTAM/GRAPAS Asia andFIAAP/VICTAM/GRAPAS exhibitions inEurope, the GRAPAS Innovation Award hasstruck a chord with exhibitors from all threesectors of the milling industry.Aimed at developments for the milling of

flour, rice and cereals industries, theGRAPAS Innovation Award has identified arange of products that all those working inthe milling sector should be informed about.Just last year in Europe, the GRAPAS

Innovation Award was won jointly byBühler for its Antares Plus Rollermill and

Alapala for its Similago II Rollermill (see:http://issuu.com/gfmt/docs/mag1507_w1). The runner-up was FH Schule

Muehlenbau GmbH for its Drum GroatCutter TGS for processing oats which isgaining in importance as the merits of thiscereals and becoming better understood.In the group of closely fought positions

behind the runner-up was ‘highly-commended’ DSL Systems Ltd for itsOEE4 Feed/OEE4 Flour remote plantmonitoring system. Commended was CPM Europe BV for its

new hammer mill and its evolutionarydesign; IVS Dosing Technology for itsPOWLI Enzymes and other micro-components in liquid form for increasingprocessing efficiencies; EnviroLogix Inc forits DNAble Salmonella Rapid Screening Kitto identify problems with materials rapidly;Tavolia Intelscan Sarl for its pellet cooleroptimization and the economic benefit itprovides and finally The Dutch MillingTechnology International BV for its Pellet Mill850-250 and the innovative advances inseveral respects. Two years ago, GRAPAS Asia awarded its

innovation award to 4B Braime ElevatorComponents for its Hazardmon.com(pictured above right), a dust explosionsystems that takes real time condition

monitoring of equipment faults to a newlevel (see: http://bit.ly/1PfZtmC).Bühler was runner-up with the ‘highly-

commended’ Combistoner for cleaninggrain prior to milling followed by MorillonSAS with its Super SHG Hydrascrew whichdischarges bulk materials that have poorflow characteristics.Milling and Grain (and the International

Milling and Grain Directory) which sponsorsthe award is calling for applications fromexhibitors attending GRAPAS Asia 2016. The application form is to be found with

the exhibitors’ handbook which can bereached by logging on to the followingwebsites: www.fiaap.com,www.victam.com or www.grapas.eu

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 19

Page 20: Showtime 21-1

20 Showtime

venue

The showGround levelFIAAP/VICTAM/GRAPAS exhibitions andVictam information stand (lobby).Level twoConferences, technical seminars, theASEAN Symposium and Summit.

Accessing BITECThe centre is accessible via 3 entrances :1st and 2nd are along Bangna-Trad Road(km.1) and the 3rd entrance is alongSukhumvit Road via expressway.

By BTS (Skytrain)Bang Na Station (Exit 1). A shuttle servicethat transports passengers from theSukhumvit Road entrance to exhibitionhalls is also available for some events heldat BITEC.

By car15 minutes drive from the SuvarnabhumiInternational airport. Directly linked by theexpressway to Centre Business District (10km). Links the Outer Ring Road toextended every other part of Bangkok toavoid traffic jam in rush hours, which awayfrom BITEC 7 km. Indoor and outdoorparking space for 4,700 vehicles – 1,680cars indoor, and 3,020 cars outdoor.

By taxiFor your convenience and comfort, taxiservice will be available for your pre-bookings at Business Centre. The taxistand is also available by drop off area infront of EH 103.

Disabled accessBITEC provides unrestricted access fordisabled visitors. Disabled toilets areprovided throughout the venue. Disabledparking bays are available in Basement 1.

BITEC – easy accessand modern facilities

The event will be held in theBangkok International Trade& Exhibition Centre, (BITEC)in Bangkok, Thailand.This modern, purpose builtair-conditioned exhibitionand conference centre iseasily accessed fromdowntown Bangkok.

Trendy and tasty food and beverageoptions at BITECThe BITEC banqueting team offers acomprehensive range of food and beverageoptions for your convenience. Severalrestaurants and dining venues are availableon-site to suit a variety of tastes andappetites. Your choice of Asian or Westerndishes is available at our restaurantslocated along the concourse and a gourmetfood court is located in the basement floor.For a quick snack or coffee to go, try oneof our coffee shops and bakery outlets.

FahrenheitDesigned with the concept to bring theoutdoor indoors. The restaurant boastsglazed transparent open plan dining withgenerous space and natural lighting. Thebuffet and á la carte menu offer Asian andWestern cuisine. Located on ground floor.

Coffee i doCoffee i do features coffee, sweets andsnacks for a quick break or meeting up atour entry hall.

deli.cio.us. Internet bistro featuring trendy sandwiches,crispy salads and desserts prepared by ourchefs in the show kitchen.

Food ConnexionEnjoy a large variety of local andinternational dishes at our gourmet foodcourt. With up to 40 flavourful food andbeverage stalls, there is something foreveryone at Food Connexion.

Contact detailsBangkok International Trade & ExhibitionCentre (BITEC), 88 Bangna-Trad Road(Km.1), Bangna, Bangkok 10260, Thailand.www.bitec.co.th

Above: BITEC offers easy parking – bothindoors and out, plus a comprehensiverange of restaurants and coffee shops.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 20

Page 21: Showtime 21-1

21Showtime

venue

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 21

Page 22: Showtime 21-1

22 Showtime

bangkok

All about BangkokBangkok is the political, economic, cultural, culinary, and spiritual capital of Thailand, andfeatures both old-world charm and modern convenience, at times served up in anapparently chaotic manner, but always with a gracious smile.

Visitors who travel to Bangkok can beoverwhelmed by the sheer size of the cityand the vast number of attractionsBangkok has to offer. Indeed there is awide variety of Bangkok sightseeingopportunities spanning more than twocenturies of rapid development followingthe city’s founding in 1782 by King Rama I,the first king of the present Chakri dynasty.Since that auspicious date, Bangkok hasswelled to a cosmopolitan, 21st centurycity of more than ten million inhabitants. Whilst the immensity of the city and its

bustling streets can be intimidating at first,those who spend some time in Bangkokare quickly enamoured by the myriad ofattractions Bangkok contains, from exotictemples, which underscore Thailand’sstrong Buddhist history, to modernshopping malls.

Whilst in Bangkok try to visit Thailand’sGrand Palace (pictured right), arguably thepremier Bangkok sightseeing attraction.Situated in the heart of Bangkok’sRattanakosin Island, the gleaming spires ofthe Grand Palace are conveniently locatednearby Bangkok’s most spectaculartemples, including the Temple of theEmerald Buddha (Wat Phra Kaeo), theTemple of Dawn (Wat Arun), and Wat Pho,which was home of the first Thai massageschool in the kingdom. These iconic destinations are top

attractions to all visitors who travel toBangkok looking to appreciate Thailand’sunique cultural traditions. In fact, there aremore than 400 functioning Buddhisttemples throughout the city and it’s notuncommon when you travel in Bangkok tospot saffron robed monks collecting

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 22

Page 23: Showtime 21-1

23Showtime

bangkok

Flight duration times from majorAsia/Pacific cities (approximate timings)

Beijing 5.25 hoursChristchurch 11.75 hoursDhaka 2.50 hoursHanoi 2.00 hoursHong Kong 2.75 hoursJakarta 3.50 hoursKuala Lumpur 2.25 hoursManila 3.25 hoursMumbai 4.75 hoursNew Delhi 4.50 hoursPhnom Penh 1.25 hoursRangoon 1.50 hoursSaigon 2.00 hoursSeoul 5.75 hoursShanghai 4.50 hoursSingapore 2.25 hoursSydney 9.00 hoursTaipei 4.00 hoursTokyo 5.50 hoursVientiane 2.00 hours

morning alms or travelling throughout outthe city, including along the Chao Phraya,the “River of Kings”, which passesalongside the Temple of the Dawn. The winding Chao Phraya is connected

by numerous canals from which Bangkokhas earned its nickname the ‘Venice of theEast’; when you travel around Bangkok, acruise on the Chao Phraya, a visit to afloating market, or an exploration of thecities ‘back alley’ canals (khlongs) arethemselves unique attractions. Otherhistorical and cultural Bangkok sightseeing‘must sees’ include the National Museum,Vimanmek Mansion, and Suan PakkadPalace, all of which either house fine art orare national treasures in their own right. Beyond Bangkok’s historical district, there

are plenty of other attractions that make aBangkok visit both enjoyable andmemorable. The downtown districts alongSilom and Sukhumvit Roads have aconvenient electric rail system, including anelevated sky-train and underground subwaythat have made travel in Bangkok both easyand enjoyable. Connecting hotels directlyto shopping malls and traditional markets,such as Mah Boon Krong Centre andChatuchak (JJ) weekend market, the MRTand BTS systems have literally elevatedBangkok shopping to world-class status.

Key tipsBeware of scams involving tuk tuks, gemshops, and tailors, particularly aroundpopular tourist attractions. Remember, there is no such thing as a

free ride. It’s better to flag down taxisthat are already driving (the red lightmeans empty); these will generally use themeter while parked taxis typically ask forhigher fixed fares or will take you for theproverbial ‘ride’. Be aware of the possibility of credit card

fraud. Don’t lose sight of your card duringtransactions. Be on your guard againstpickpockets and bag snatchers. Foreignvisitors have had items snatched bythieves on motorbikes when walkingalong busy streets or travelling in opentransport like tuk tuks. If you travel by bus,make sure cash and valuables you haveare kept securely. There have also been incidents where

passengers have had items taken frombags while asleep. If you need emergency medical assistance

during your trip, dial 1669 and ask for anambulance. You should contact yourinsurance/medical assistance companypromptly if you are referred to a medicalfacility for treatment. You should also takemosquito bite avoidance measures.

Do you need a visa? Visit:www.victam.com/?i=360

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 23

Page 24: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 24

Page 25: Showtime 21-1

Asia/Pacific’s only dedicated eventfor the supply, use and formulationof ingredients and additives within

animal feed, dry petfood andaquafeed production

The premier and largest event inAsia/Pacific for the productionand processing of animal feed,petfood and aquafeed and also

biomass technology

South East Asia’s only event forrice and flour milling, grain

processing, storage & preservation,industrial noodle, breakfast cereal

and extruded snack production

T H E E X H I B I T I O N S A N D C O N F E R E N C E S

29 – 31 March 2016 . Bangkok International Trade & Exhibition Centre (BITEC), 88 Bangna-Trad Road (Km.1), Bangna, Bangkok 10260, Thailand

Y O U R F R E E V I S I T O R I N V I T A T I O N T O S E E

H U N D R E D S O F E X H I B I T O R S F R O M Y O U R I N D U S T R Y

Organised by and in association with: VICTAM International BV

PO Box 197, 3860 AD Nijkerk, The Netherlands

Tel: +31 (0)33 246 4404 Fax: +31 (0)33 246 4706

Email: [email protected] Web: www.victam.com

“A Partnership in Synergy...Your Key to Success”

A number of local superior hotels have been selected to accommodate visitors and conferencedelegates. These hotels will be offering preferential accommodation rates, including dailyinternational buffet breakfast, and are in the bustling downtown area of Bangkok.

Bangkok International Trade & Exhibition Centre (right) has its own station at Bangna on theefficient Skytrain system. This enables fast, air-conditioned and cheap travel to the exhibition halls.

Further information: For hotel reservation forms or more information on accommodation and a map of downtownBangkok, please visit our websites: www.fiaap.com, www.victam.com or www.grapas.eu

A C C O M M O D A T I O N A N D L O C A L T R A V E L

S U P P O R T E R S A N D O R G A N I S E R S

Supported by: Ministry of Agriculture & Co-Operatives

Thai Department of Livestock Development

Thai Department of Fisheries

Thai Feed Mill Association

Thai Rice Associations

Thai Petfood Association

Thai Chamber of Commerce

Thailand Convention & Exhibition Bureau

Please note photography is not permitted unless expressly authorised onsite by the organisers

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 25

Page 26: Showtime 21-1

The ASEAN Feed & Rice SymposiumA high ranking symposium will evaluate

the industries within the ASEAN Economic

Bloc that we serve.

Admittance is free of charge to all registered visitors.

Further information: Full conference and symposium programmes and registration

details are also available on the following websites:

www.fiaap.com or www.victam.com or www.grapas.eu

Conferences for 2016:1. The Global Milling Conference with GRAPAS Asia 20162. The FIAAP Animal Nutrition Conference 20163. Petfood Forum Asia 2016 4. Aquafeed Horizons 2016 5. Biomass Asia Conference 20166. GMP+ Feed Safety AssurancePlus: A number of the exhibitors will present a series of technical

seminars. Admittance is free of charge to all registered visitors.

A current list of exhibitors at the trade shows can be found on

the websites shown below.

For further information on these exhibitions and other events

organised by VICTAM International please email us at:

[email protected] or visit the following websites:

FIAAP Asia 2016: www.fiaap.comVICTAM Asia 2016: www.victam.comGRAPAS Asia 2016: www.grapas.eu

F R E E V I S I T O R E N T R A N C E

T H E C O N F E R E N C E S

T H E E X H I B I T I O N S

ASEANFeed&RiceSymposium

To obtain your free exhibition visitor entrance badge visit

www.fiaap.com or www.victam.com or www.grapas.euand select ‘Visitor Registration’. Complete the form and we will

send you, by return email, a visitor confirmation.

This confirmation must be brought to the show

and exchanged at the Visitor Pre-registration

desks for your free entrance badge. The badge is

valid for all three days and for each of the exhibitions.

To avoid disappointment, please arrange for visas early.

Exhibition opening hours

Tuesday 29 March 201610.00 – 18.00

Wednesday 30 March 201610.00 – 18.00

Thursday 31 March 201610.00 – 16.00

Please note visitor registration closes at 14.00 on Thursday 31 March

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 26

Page 27: Showtime 21-1

27Showtime

exhibitor previews

Exhib

itorP

revie

wsO

n th

e fo

llow

ing

page

s yo

u w

ill fin

d in

form

atio

n on

a n

umbe

r of e

xhib

itors

and

wha

t you

will

see

at th

e sh

ows 4B Asia Pacific

A market leader in the field of bucketelevator components, 4B will be showingtheir range of elevator belts, bolts andbuckets, including the new JUMBO CC-Sultra heavy duty elevator bucket.Also on display will be 4B’s drop forged

conveyor chains – including the popularBolt ‘n’ Go system – which uses bolt-onflights instead of welding.4B’s electronic monitoring equipment for

bucket elevators and conveyors includesbearing temperature sensors, beltmisalignment sensors, (under)speedswitches, level/choke switches andcombined monitoring systems. NEW: 4B’s SpeedMaster with Pulse Pilot

device provides independent, real-timeverification of an entire speed monitoringsystem to ensure that alarms andshutdowns are working as expected

Adifo NVThousands of users all around the globerely on BESTMIX® Feed Formulation andquality management software. Why?Because with BESTMIX®, they secure theirmarket position and decrease their rawmaterial costs, in spite of fluctuating rawmaterials markets. Moreover, they producethe best quality at the lowest cost price.Check out www. feedformulation.com.

Find out who uses BESTMIX® and how youtoo can maximize your profits. Immediatelydecrease your raw materials costs by upto 2%! Increase your business efficiency,secure your data and guarantee yourproduct quality.Booth C071 www.feedformulation.com

www.adifo.com

Aerox B.V.Aerox B.V. is the world’s leading odourcontrol specialist. With the Aerox-Injectorwe remove the odours that are produced inindustrial processes. We help factories tominimize their emissions in order to complywith legislation, but most important: Tokeep your neighbours happy.For more information please contact us or

visit our website: www.aeroxinjector.com

Ag Growth InternationalAg Growth International (AGI) is a leadingmanufacturer of portable and stationarygrain handling, storage and conditioningequipment, including augers, beltconveyors, storage bins, handlingaccessories and aeration equipment. AGIhas manufacturing facilities in Canada, theUnited States, the United Kingdom andFinland.

Agentis InnovationsAgentis Innovations is specialist indeveloping and implementing millingautomation systems, data acquisition and

management solutions. Our business is theanimal feed milling industry. AgentisInnovations product range is designed toachieve the core goals of providingoptimization, cost saving solutions andenhancing the profitability of our customers. For the first time, Agentis Innovations will

be showcasing its latest technology whichin real time measures the moisture of theraw material during batching and autocorrects the batching weight to the true drymatter of specific raw materials. Thisadvancement enables feed companies toformulate accurately and make significantsavings.

AgriTech Inc.AgriTech Inc., located in Wuxi, China, thecradle of Chinese modern milling industry. With brand MILTEC, it takes a lead in

serving the fields of flour, rice, feed millingand oilseed processing for more than 20years. The Corporation offers completesolutions to the industries, includingdesigning, manufacturing, engineering ofturn-key project as well as single machinesupply. At this exhibition we have pleasure in

introducing our new products MultilayerVibrating Sieve which is efficient for powderor granule grading and separating.

Agromatic AGAgromatic – Swiss Made since 1979.Providing temperature monitoring solutionsfor grain storage and cereal silos,feedstock and other crude bulk material.It’s our aim and pleasure to help you withour large range of modular systems andrugged sensors. We look forward to see you: Booth C029

www.agromatic.com

All About FeedThe name says it all. All About Feed is amultimedia brand bringing you the latestdevelopment on animal nutrition andprocessing. Compiling data on mycotoxinsand compound feed, plus addressingtopical issues within the global animal feedindustry. It has a strong focus on newresearch and innovation, presented byleading scientists from around the world.All About Feed, Dairy Global, Pig

Progress, World Poultry are part of theAgri International portfolio, published byReed business Information.Get your free digital magazine subscription

at our VICTAM Asia booth.

ANDRITZ Feed & Biofuel A/SANDRITZ designs and builds key processmachines, but also offers complete plantsolutions for the global animal feedindustries. Our business is based on acompetitive approach to matching therequirements of successful livestock feed,

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 27

27Showtime

exhibitor previews

Exhib

itorP

revie

wsO

n th

e fo

llow

ing

page

s yo

u w

ill fin

d in

form

atio

n on

a n

umbe

r of e

xhib

itors

and

wha

t you

will

see

at th

e sh

ows 4B Asia Pacific

A market leader in the field of bucketelevator components, 4B will be showingtheir range of elevator belts, bolts andbuckets, including the new JUMBO CC-Sultra heavy duty elevator bucket.Also on display will be 4B’s drop forged

conveyor chains – including the popularBolt ‘n’ Go system – which uses bolt-onflights instead of welding.4B’s electronic monitoring equipment for

bucket elevators and conveyors includesbearing temperature sensors, beltmisalignment sensors, (under)speedswitches, level/choke switches andcombined monitoring systems. NEW: 4B’s SpeedMaster with Pulse Pilot

device provides independent, real-timeverification of an entire speed monitoringsystem to ensure that alarms andshutdowns are working as expected

Adifo NVThousands of users all around the globerely on BESTMIX® Feed Formulation andquality management software. Why?Because with BESTMIX®, they secure theirmarket position and decrease their rawmaterial costs, in spite of fluctuating rawmaterials markets. Moreover, they producethe best quality at the lowest cost price.Check out www. feedformulation.com.

Find out who uses BESTMIX® and how youtoo can maximize your profits. Immediatelydecrease your raw materials costs by upto 2%! Increase your business efficiency,secure your data and guarantee yourproduct quality.Booth C071 www.feedformulation.com

www.adifo.com

Aerox B.V.Aerox B.V. is the world’s leading odourcontrol specialist. With the Aerox-Injectorwe remove the odours that are produced inindustrial processes. We help factories tominimize their emissions in order to complywith legislation, but most important: Tokeep your neighbours happy.For more information please contact us or

visit our website: www.aeroxinjector.com

Ag Growth InternationalAg Growth International (AGI) is a leadingmanufacturer of portable and stationarygrain handling, storage and conditioningequipment, including augers, beltconveyors, storage bins, handlingaccessories and aeration equipment. AGIhas manufacturing facilities in Canada, theUnited States, the United Kingdom andFinland.

Agentis InnovationsAgentis Innovations is specialist indeveloping and implementing millingautomation systems, data acquisition and

management solutions. Our business is theanimal feed milling industry. AgentisInnovations product range is designed toachieve the core goals of providingoptimization, cost saving solutions andenhancing the profitability of our customers. For the first time, Agentis Innovations will

be showcasing its latest technology whichin real time measures the moisture of theraw material during batching and autocorrects the batching weight to the true drymatter of specific raw materials. Thisadvancement enables feed companies toformulate accurately and make significantsavings.

AgriTech Inc.AgriTech Inc., located in Wuxi, China, thecradle of Chinese modern milling industry. With brand MILTEC, it takes a lead in

serving the fields of flour, rice, feed millingand oilseed processing for more than 20years. The Corporation offers completesolutions to the industries, includingdesigning, manufacturing, engineering ofturn-key project as well as single machinesupply. At this exhibition we have pleasure in

introducing our new products MultilayerVibrating Sieve which is efficient for powderor granule grading and separating.

Agromatic AGAgromatic – Swiss Made since 1979.Providing temperature monitoring solutionsfor grain storage and cereal silos,feedstock and other crude bulk material.It’s our aim and pleasure to help you withour large range of modular systems andrugged sensors. We look forward to see you: Booth C029

www.agromatic.com

All About FeedThe name says it all. All About Feed is amultimedia brand bringing you the latestdevelopment on animal nutrition andprocessing. Compiling data on mycotoxinsand compound feed, plus addressingtopical issues within the global animal feedindustry. It has a strong focus on newresearch and innovation, presented byleading scientists from around the world.All About Feed, Dairy Global, Pig

Progress, World Poultry are part of theAgri International portfolio, published byReed business Information.Get your free digital magazine subscription

at our VICTAM Asia booth.

ANDRITZ Feed & Biofuel A/SANDRITZ designs and builds key processmachines, but also offers complete plantsolutions for the global animal feedindustries. Our business is based on acompetitive approach to matching therequirements of successful livestock feed,

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 27

Page 28: Showtime 21-1

28 Showtime

exhibitor previews

aquatic feed and pet food companies.ANDRITZ is proud to introduce the new

OptiMix paddle mixer to the market. Thenew mixer has shorter mixing time and thenew patentable design features are uniquefor the market. The OptiMix has a newsmooth design to improve its performance.Further, cables and other installations arehidden, making it easier to clean. For more information: www.andritz.com/ft

Anping Qinghe Metal Mesh Co LtdAnping Qinghe Metal Mesh is a leadingperforated metal manufacturer in China,we provide perforated metal in both sheetsand coil, and materials can be custommade including plain steel, galvanized steel,stainless steel, aluminium etc.

Aquafeed.comSince 1998, Aquafeed.com has been therecognised provider of sector-specificbusiness, scientific and technical news andinformation, through content-rich webportals, magazines and newsletters – freelyavailable, in support of the industry. Our uniquely experienced team also

provides conferences and technicalconsulting worldwide. Join us at AquafeedHorizons Asia conference on the openingday of the show! Aquafeed.com’s dedicated information

platform for aquatic hatchery operators isHatcheryfeed.com. Visit the website for awealth of resources and subscribe to thepublications for free: the annual HatcheryFeed Guide is the industry’s directory ofaquatic hatchery feeds.

Arm & Hammer Animal NutritionArm & Hammer Animal Nutrition is a global,multispecies company based in Princeton,New Jersey with manufacturing facilities infour U.S. states. We offer a full portfolio of nutritional

solutions for poultry including key productsthat utilize Refined FunctionalCarbohydrateTM (RFCTM) technology –AVIATORTM and CELMANAXTM – to helpkeep animals healthy and productivethroughout the life cycle journey. Our globalteam is dedicated to delivering the rightsolutions and the right advice at the righttime. With Arm & Hammer Animal Nutritionit’s Animals First. Productivity Always. Learn more at Booth D141or at

AHanimalnutrition.com.

AWILA Anlagenbau GmbHFeed mill plants and equipment plusprocess technology for the production of alltypes of animal feed, grain drying, cleaning,storage. Conveying elements, hammermills, mixers, pellet presses, grains silos,premix plants, portioning systems, fat andliquid addition, feed and full-fat soyaconditioning systems.

Bastak Food Machine Med Ltd StiOur Company Bastak Gıda Makine MedikalPaz.Ith.Ihr.San.Tic.Ltd.Sti. established in1999, Ankara, TURKEY. After this time ourcompany has begun to produce flouradditives and quality control apparatus. The fundamental principle of our company

is the satisfaction of the valuable clients.We have exported our instruments morethan 50 countries and 7000 instrumentsare working well in different countries of theworld. Our company gives greatimportance to R&D studies. Some of our instruments: Gluten washer,

index, dry gluten, enzyme meter, roller –hammer mills, moisture meter, samplers.Flour additives, quality control devices,laboratory chemical, glass and consumablematerials.

Bentall Rowlands Storage SystemsLimitedBentall Rowlands Storage Systems Limitedis a leading CE Certified, UK manufacturerin complete storage and processingequipment solutions for the agricultural andindustrial markets. We have Eurocode andDINN 1055 designs available.We offer a wide range of galvanised steel

silos and hoppers, water tanks, catwalksand platforms, material handling equipment,cleaning and grading and weighing anddrying systems that are assembledworldwide.Come and visit us at the show on stand

D109 – Hall EH104 and EH103.For further information please visit our

website: www.bentallrowlands.com or call+44 (0) 1724 282 828.

Bilek Tech Makina San ve Tic Ltd StiBILEKTECH FEED MILLING SYSTEMS wascreated by ALTINBILEK in 2014 in order tomanufacture and supply complete feedmilling facilities for global market. Its product range includes pellet presses,

hammer mills, mixers, coolers, conditioners,crumblers, elevators, chain conveyors, beltconveyors, screw conveyors, squaremodular feed silos, round silos, galvanizedgrain bins. BILEKTECH serves in many sectors such

as feed, biomass pelleting, organic fertilizer,flaking and grain industries.

BIOMINAt BIOMIN we harness the power ofscience to support animal health andperformance. By applying state-of-the-artand proprietary technology we delivernatural, sustainable and profitable solutionsto the livestock industry. For over 30 years we have pioneered

innovative solutions for mycotoxin riskmanagement and gut performance.Our in-house R&D program at the BIOMIN

Research Center is staffed by 80 scientific

researchers and supported by eightCenters for Applied Animal Nutrition and aresearch network of 150 academic andresearch institutions globally. Our clients inthe poultry, swine, cattle and aquaculturesectors are located in more than 100countries worldwide.

Bruker Optics / Bruker BIOSPIN AGFor over 30 years, Bruker has suppliedadvanced FT-NIR and FT-IR technology tocustomers worldwide. Our spectrometersperform exceptionally in thousands oflaboratories and in production lines totallyintegrated into the whole process ofproduct development, production andquality control. Today, Bruker is the fastestgrowing NIR supplier in the world providingsolutions to various industries including thefeed industry.Bruker offers a set of universal NIR

calibrations for the analysis of raw materialsand finished products in the feed industryfor common parameters like moisture, oil,protein, fiber and ash, as well as for morespecific tasks. Bruker calibrations help youto achieve a fast and effective qualitycontrol at minimum cost.

Bühler ChangzhouThe Bühler Feed & Biomass business unithas been continuously adapting its productportfolio, manufacturing and logisticsservices specifically to the needs ofcustomers in Southeast Asia. Bühler Changzhou, a highly successful

affiliate of Feed & Biomass business unitwhich has been setting new benchmark forfeed mill quality standard in Southeast Asiasince its launch in 2008, has beenexpanding over the past few years into acontinental base for China and SoutheastAsia. On the basis of a shared technological

Bühler platform, a range of products havebeen developed and produced in Chinathat matched regional requirements. Atechnological development center andChina Institute of Feed Technology(CFT)for customer staff have been set up.

CLEXTRALEvolum+ & Preconditioner+: the newstandards for extrusion excellence.The Evolum+ twin screw extruders range

combines higher performance, smartoperation and hygienic design.Evolum+ extruders include new

technological solutions and features, suchas optimized De/Di ratio and an advancedprocess control, leading to an overallenhanced performance: throughputs,process flexibility and consistency,product quality. When equipped with CLEXTRAL

innovative Preconditioner+, the perform-ance of any extrusion unit is increased.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 28

28 Showtime

exhibitor previews

aquatic feed and pet food companies.ANDRITZ is proud to introduce the new

OptiMix paddle mixer to the market. Thenew mixer has shorter mixing time and thenew patentable design features are uniquefor the market. The OptiMix has a newsmooth design to improve its performance.Further, cables and other installations arehidden, making it easier to clean. For more information: www.andritz.com/ft

Anping Qinghe Metal Mesh Co LtdAnping Qinghe Metal Mesh is a leadingperforated metal manufacturer in China,we provide perforated metal in both sheetsand coil, and materials can be custommade including plain steel, galvanized steel,stainless steel, aluminium etc.

Aquafeed.comSince 1998, Aquafeed.com has been therecognised provider of sector-specificbusiness, scientific and technical news andinformation, through content-rich webportals, magazines and newsletters – freelyavailable, in support of the industry. Our uniquely experienced team also

provides conferences and technicalconsulting worldwide. Join us at AquafeedHorizons Asia conference on the openingday of the show! Aquafeed.com’s dedicated information

platform for aquatic hatchery operators isHatcheryfeed.com. Visit the website for awealth of resources and subscribe to thepublications for free: the annual HatcheryFeed Guide is the industry’s directory ofaquatic hatchery feeds.

Arm & Hammer Animal NutritionArm & Hammer Animal Nutrition is a global,multispecies company based in Princeton,New Jersey with manufacturing facilities infour U.S. states. We offer a full portfolio of nutritional

solutions for poultry including key productsthat utilize Refined FunctionalCarbohydrateTM (RFCTM) technology –AVIATORTM and CELMANAXTM – to helpkeep animals healthy and productivethroughout the life cycle journey. Our globalteam is dedicated to delivering the rightsolutions and the right advice at the righttime. With Arm & Hammer Animal Nutritionit’s Animals First. Productivity Always. Learn more at Booth D141or at

AHanimalnutrition.com.

AWILA Anlagenbau GmbHFeed mill plants and equipment plusprocess technology for the production of alltypes of animal feed, grain drying, cleaning,storage. Conveying elements, hammermills, mixers, pellet presses, grains silos,premix plants, portioning systems, fat andliquid addition, feed and full-fat soyaconditioning systems.

Bastak Food Machine Med Ltd StiOur Company Bastak Gıda Makine MedikalPaz.Ith.Ihr.San.Tic.Ltd.Sti. established in1999, Ankara, TURKEY. After this time ourcompany has begun to produce flouradditives and quality control apparatus. The fundamental principle of our company

is the satisfaction of the valuable clients.We have exported our instruments morethan 50 countries and 7000 instrumentsare working well in different countries of theworld. Our company gives greatimportance to R&D studies. Some of our instruments: Gluten washer,

index, dry gluten, enzyme meter, roller –hammer mills, moisture meter, samplers.Flour additives, quality control devices,laboratory chemical, glass and consumablematerials.

Bentall Rowlands Storage SystemsLimitedBentall Rowlands Storage Systems Limitedis a leading CE Certified, UK manufacturerin complete storage and processingequipment solutions for the agricultural andindustrial markets. We have Eurocode andDINN 1055 designs available.We offer a wide range of galvanised steel

silos and hoppers, water tanks, catwalksand platforms, material handling equipment,cleaning and grading and weighing anddrying systems that are assembledworldwide.Come and visit us at the show on stand

D109 – Hall EH104 and EH103.For further information please visit our

website: www.bentallrowlands.com or call+44 (0) 1724 282 828.

Bilek Tech Makina San ve Tic Ltd StiBILEKTECH FEED MILLING SYSTEMS wascreated by ALTINBILEK in 2014 in order tomanufacture and supply complete feedmilling facilities for global market. Its product range includes pellet presses,

hammer mills, mixers, coolers, conditioners,crumblers, elevators, chain conveyors, beltconveyors, screw conveyors, squaremodular feed silos, round silos, galvanizedgrain bins. BILEKTECH serves in many sectors such

as feed, biomass pelleting, organic fertilizer,flaking and grain industries.

BIOMINAt BIOMIN we harness the power ofscience to support animal health andperformance. By applying state-of-the-artand proprietary technology we delivernatural, sustainable and profitable solutionsto the livestock industry. For over 30 years we have pioneered

innovative solutions for mycotoxin riskmanagement and gut performance.Our in-house R&D program at the BIOMIN

Research Center is staffed by 80 scientific

researchers and supported by eightCenters for Applied Animal Nutrition and aresearch network of 150 academic andresearch institutions globally. Our clients inthe poultry, swine, cattle and aquaculturesectors are located in more than 100countries worldwide.

Bruker Optics / Bruker BIOSPIN AGFor over 30 years, Bruker has suppliedadvanced FT-NIR and FT-IR technology tocustomers worldwide. Our spectrometersperform exceptionally in thousands oflaboratories and in production lines totallyintegrated into the whole process ofproduct development, production andquality control. Today, Bruker is the fastestgrowing NIR supplier in the world providingsolutions to various industries including thefeed industry.Bruker offers a set of universal NIR

calibrations for the analysis of raw materialsand finished products in the feed industryfor common parameters like moisture, oil,protein, fiber and ash, as well as for morespecific tasks. Bruker calibrations help youto achieve a fast and effective qualitycontrol at minimum cost.

Bühler ChangzhouThe Bühler Feed & Biomass business unithas been continuously adapting its productportfolio, manufacturing and logisticsservices specifically to the needs ofcustomers in Southeast Asia. Bühler Changzhou, a highly successful

affiliate of Feed & Biomass business unitwhich has been setting new benchmark forfeed mill quality standard in Southeast Asiasince its launch in 2008, has beenexpanding over the past few years into acontinental base for China and SoutheastAsia. On the basis of a shared technological

Bühler platform, a range of products havebeen developed and produced in Chinathat matched regional requirements. Atechnological development center andChina Institute of Feed Technology(CFT)for customer staff have been set up.

CLEXTRALEvolum+ & Preconditioner+: the newstandards for extrusion excellence.The Evolum+ twin screw extruders range

combines higher performance, smartoperation and hygienic design.Evolum+ extruders include new

technological solutions and features, suchas optimized De/Di ratio and an advancedprocess control, leading to an overallenhanced performance: throughputs,process flexibility and consistency,product quality. When equipped with CLEXTRAL

innovative Preconditioner+, the perform-ance of any extrusion unit is increased.

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 28

Page 29: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 29

Page 30: Showtime 21-1

30 Showtime

Thanks to its ability to efficiently adjust thefilling ratio, the mixing performance and theresidence time, the Preconditioner+improves the overall process and the qualityof the finished products, while savingenergy, whatever the recipe.

CPM/Pacific (Private) LtdCalifornia Pellet Mill is a world-renownedpelleting specialist. This time a pellet millwith new add-ons will be on show. Wired Shear Pin, Remote Knife

Adjustment, Automatic Remote Roll Speedmeasurement and electronic oil indicator,those allows our customers to enhancetheir productivity as well as having a safeworking environment.

Dr. Eckel GmbHDr. Eckel GmbH is a leading Germansupplier of innovative feed additives. Withproducts for optimized and sustainableanimal nutrition, Dr. Eckel offers creativesolutions to meet the global challenges ofmodern animal production. In recent years Dr. Eckel GmbH won

several innovation awards for its phytogenicAnta®Phyt range for both livestock andaquaculture. For VICTAM 2016, Dr. Eckellaunches Anta®Ox Aqua, a definite all-natural health additive, developed to fit theneeds of modern intensive shrimpproduction. The growth enhancing effectsof Anta®Ox Aqua are the result of its anti-inflammatory property – similar to thefunctional pathway of classic antibioticgrowth promoters (AGPs).

DATASTORWe have built a strong reputation forAutomation in the Agri/Aquaculture feedIndustry over 37 years for innovation, highquality system design, delivery and services.Following on from the successful release

of our latest generation PCS, ‘Imperium forFeed’ at VICTAM Cologne we now bring toAsia. Imperium gives a User web browserfront-end, enhanced graphics/Trends, SQLDatabase, Translation, O.E.E, Downtime,Energy displays, K.P.I’s, ConfigurableMenus/Displays & Reporting. Also ondisplay will be our E.R.P, finite schedulingsoftware.

Daynew Bio-technology Co, LtdGuangdong Daynew Bio-technology Co.,Ltd, established in 2002, is a high-techinternational enterprise, which hasintegrated in R&D, production andmarketing of aquatic addtitives. Our keyproducts include functional feed additivesand aquatic feed premixes, etc. Daynew has set up advanced enterprise

management system and quality controlsystem, has obtained ISO9001: 2008 andISO22000: 2005 international qualitymanagement system certification. 3000

square meters premix production workshopand two full-automatic Bühler productionlines have been constructed strictly withGMP standard. Sales cover all of China andnow are expanding to Southeast Asia,South America and Africa. Welcome to our stand (D139) and call

0086-13652918125.

DIANA Pet FoodDIANA Pet Food, the world’s leadingpartner committed to improving pet foodperformance, develops innovative solutionsto increase the wellbeing of cats and dogs,and pet owner satisfaction. Integrating global pet food market trends

and local needs, DIANA Pet Food, memberof the Symrise Group, works closely withits customers with the sole objective ofsupporting their brand positioning andtheir values. Thanks to a combined understanding of

pet food product attributes, animalspecificities and pet owners’ expectations,DIANA Pet Food offers solutions targetedto the most critical pet food performancelevers: palatability, health and nutrition andprotection.

Dinnissen Process TechnologyDinnissen Process Technology is thespecialist in the world of bulk materials andprocess technology in various markets. An international company with more than

65 years of experience in machinedevelopment, in-house manufacturing,custom-made products, processing,control & automation, engineering andexcellent service. Milling, mixing, and vacuum coating; we

invent, develop, build and innovate. Butalso the intake of raw materials, dosing,conveying, storage, drying, sieving, andbig-bag filling are our expertise. Processtechnology for powders and granules, inthe feed, pet food, aquafeed, food andchemical sectors. We are always looking for new and

innovative solutions – most of which wedevelop, test and produce in-house!

dol-sensorsdol-sensors a/s is the safe choice forsensors and sensor solutions based uponmore than 35 years of experience indevelopment and manufacturing of highquality sensors for the demandingagricultural industry.With a growing world population in

general, and the increasing need forimproved food quality in particular, theneed for sensors is rapidly growing. Theability to measure essential productionparameters is necessary to support efficientproduction, to ensure welfare of animalsand people and to protect the environment. As a global market leader, dol-sensors a/s

is committed to serve the increasingdemands from the agricultural industry.Expect us to make sense in your

production.

DSM-Rovithai LimitedDSM Animal Nutrition & Health will revealthe latest update of the DSM OptimumVitamin Nutrition (OVN™) guidelines. Eversince their first appearance in 1958, DSM’sVitamin Supplementation Guidelines fordomestic animals have helped the feedindustry to understand and apply theappropriate vitamin intake levels.Optimum Vitamin Nutrition (OVN™) is a

cost-effective range of vitaminsupplementation. Providing the rightvitamin balance in the diet supports thehealth, wellbeing and performance oflivestock, as well as the quality of foods ofanimal origin. Please visit DSM’s booth to find out more.

eFeedLink Pte LtdeFeedLink is a leading market informationand content provider to the global feed andlivestock industry and conducts marketresearch on various Asian agriculturalsectors. With our in-depth understandingof agribusiness issues, we provide followingspecialised services to industry enterprises,agricultural advisories, and investmentanalysts globally:- Industry news and information (print and

online)- Corporate services (industry media,

advertising and branding)- Market research and consulting- Platforms to facilitate trade communicationeFeedLink is the publisher of Livestock &

Feed Business (previously known as FeedBusiness Worldwide) and industry directoryeFeedBiz and manages the agribusinesswebsite eFeedLink.com.

Elementar Analysensysteme GmbHElementar introduced the new rapid MAX Nexceed as a new member of their highlysuccessful next generation N/Proteinanalyzers. The rapid MAX N exceed setsnew standards in protein analysisaccording to the Dumas method. With the patented EAS Regainer®

technology, analysis costs are minimizeddrastically. The rapid MAX N exceed offersfast N/protein determination (5 minutes)with unsurpassed precision and highdetection sensitivity. Designed for safe unattended overnight

measurements it allows to analyze 300samples per day in routine operation.

Extru-Tech IncExtru-Tech has established the industrystandards for performance and value.Through the continual development of cost-effective answers to ever-changing

exhibitor previews

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 30

Page 31: Showtime 21-1

31Showtime

extrusion production needs. Extru-Techdesigns extrusion cooking solutions thatwill yield high production levels of premiumquality products that are fully compliantwith food safety standards.

Ezhou XingFang Grinding Tools Co,LtdWe are the top and world-classmanufacturer for emery roller of rice millingmachinery.We are the original emery roller supplier for

Bühler Drpa&bspb&dsrf and Satake VtaRice Whitener.We also provide nearly 90% of emery

rollers to Chinese rice milling machinemanufacturers, we can also supply all kindsof products for the rice milling machineryand their spare parts. We are also dealingwith rice bran oil projects, husk pelletprojects. Husk Biomass projects and allkinds of grain processing machinery.

FAMSUN (Muyang Holdings Co, Ltd)FAMSUN is an integrated solution providerof plants, equipment and services in thefarm-to-table industry chain. Our global ability and experience in

turnkey project delivery in the fields of feedmilling, grain logistics and processing, steelstructure building as well as industrialautomation has helped our customerssucceed in their respective markets. Welcome to our booth B131. Contact us:

[email protected]

FCMFCM is specialized in feed pellet machinesand plant with more than 20 years’international business experience. Till now,FCM processes series of machinesincluding: FCPM pellet mill and dies &rollers, hammer mill, mixer, counterflowcooler, electrical control system, pellet plantand etc. FCM has successfully passed the

ISO9001:2000 quality management systemcertification and the CE certificate. FCMcombines high quality machines, advancedtechnology, professional design and richinstallation together, which provide ourcustomers with efficient feed mill plant.Welcome to visit our booth B039

Feedtech International BVWe offer customized feed mill solutions forsmall, medium and large enterprises.Our feed mills are individually designed

and constructed specifically to meet all ourcustomers’ detailed demands. In FeedtechInt BV we consistently venture performanceimprovement and meet customerrequirements of our customers.A combination of advanced equipment,

excellent customer-oriented research anddevelopment (R&D) team, and strongworking capacity make all your wishes for

the next best feed mill project possible.Apart from that, our performance testingstation reassures you quality and accuracy.

FEROTECFEROTEC is the French specialist in themanufacture and supply of dies. Theseproducts are designed for pelletingproducts such as animal feed, minerals,fertilizers, wood.Each die is designed to suit the

customer’s requirements. We manufactureall types of ring and flat dies with holediameters from ø 1,2 mm to ø 30 mm.With more than 20 years of know-how,

FEROTEC brings the greatest care to theproduction process to guarantee highquality products. Around 1000 blanks areon stock to offer short production time.FEROTEC is distributed in 20 countriesthrough a large distribution network.

Format International LtdAround the world, day and night, feed millsare running Format software to optimisetheir ingredients, drive down costs andmaximise profits. In just the same way our research

programme never stops. Through ourcontinual investment in research anddevelopment, Format has achieved anumber of breakthrough advances inoptimisation. Formats optimisation tools areunique in solving the widest range offormulation questions.

FOSSFood and feed producers have much togain from ongoing developments inanalytical technology, but finding the rightsolution and getting the right return oninvestment can still be a challenge. Visit our stand F091 and we will help you

to find the way, whether you need to workwith chemical analysis, benchtop NIR orin-line NIR in the process.

FP Engineering Ltd – FP Spomax SADesigners and manufacturers of grainprocessing and handling equipment.Suppliers of complete flour and maize millssince 1882 with over 600 installationsoperating in more than 40 countries.One of the biggest European

manufacturers and suppliers of Root’s typePD blowers and centrifugally cast rolls fornumerous industries.

Fundiciones Balaguer SA (Balaguer Rolls)Fundiciones Balaguer SA, Balaguer Rollshave been manufactured for 100 years andduring 2016 the company will celebrate thecentenary of this family company whichmanufactures 16,000 chill rolls every yearexporting them to 140 countries worldwide.Balaguer Company would like to thank its

large customer base who trusted andsupported the company along this long way. Balaguer is already targeting the next 100

years of continued growth in the marketfocusing on manufacturing quality rollsavailable in the market today and tomorrow.Balaguer Rolls are the past, the present

and future of high quality rolls.

GePro Geflügel-ProteinVertriebsgesellschaft mbH & Co. KGGePro Gefluegel-Protein Vertriebs-gesellschaft mbH & Co. KG is a groupcompany of PHW, one of the largestproducers of poultry products in Europe.As a member of PHW, GePro is part ofcompletely integrated poultry production. GePro headquarter is in Diepholz

(Germany) with global sales offices locatedin Bangkok (Kingdom of Thailand) andMoscow (Russian Federation). GePro transforms poultry by-products

from the slaughterhouse into valuableingredients for animal nutrition and biofuel(SP-Power). With the state of the artproduction systems, our products are ofextremely high quality and are regarded asbenchmarks in the industry. The entire process is under strict

veterinarian control leading to consistentflawless quality and great value propositionfor our customers.

Green Wonder Biotech Co, LtdWe are the originator and inventor ofLivestock Waste Recycling & DisposalEquipment from Taiwan. Our products including probiotics of

“Bio-Hit 99” have been widely used toprevent disease spread, raise healthyanimals, protect the environment andimprove breeding efficient, also we havebeen certified with ISO22000:2005 andHACCP.

GSS SystemsGSS Systems is a high-tech manufacturerspecializing in grain drying, materialhandling & conveying, silo unloading &sweeping, grain storage and dust collectingfor grain, oil, feed, brewing, bio-energyindustries and ports. GSS providesproduct engineering, manufacturing,turnkey service etc. GSS products: Process Dryers, Batch

Grain Dryers, Mixed Flow Dryers, BiomassFurnaces, Bucket Elevators, En-MasseConveyors, Up-Load™Drag Conveyors,Enclosed Belt Conveyors, Tri-Roller BeltConveyors, Air Supported Belt Conveyors,Screw Conveyors, Cable(Chain)and DiscConveyors, Custom Made Conveyors,Scalperators, Container Unloaders, CleanSweep Augers, Dust and PollutionsControl Systems, Grain Sampling Systems,MRO etc. GSS booth no. D103

exhibitor previews

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 31

Page 32: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:11 Page 32

Page 33: Showtime 21-1

33Showtime

Hunan XiangLiang MachineryManufacture Co, LtdHunan XiangLiang Machinery ManufactureCo, Ltd was established in1956, weproduce a series rice milling machines, aseries of grain unloaders. Our productions are hot selling with most

competitively price and highly quality withour professional international after service.Contact person: Ms Cathy

Tel: 008613467696115Email:[email protected]

Hydronix LtdMoisture Sensors for Feed and Grain.Hydronix is the world’s leading manufacturerof digital microwave moisture sensors. Designed to work in flowing materials our

sensors are ideally suited to the feed andgrain industry and provide a simplesolution to ensure that grain is always atthe optimum moisture level for processingor storage.Installation is simple with the sensors

positioned in the flow of materials in silos,mixers, pelletisers, conveyors or before /after a dryer. The Hydro-Probe XT is designed for silos

and conveyors and the Hydro-Mix is flushmounted making it suitable for screwconveyors and mixers.Visit: www.hydronix.com

IDAH Co, LtdIDAH is recognized as a leading innovatorof process equipment and processing plantturn-key solution provider for food, feedand biomass industry. With comprehensive product ranges and

customize design services, IDAH is yourmost trust-worthy partner to empower yourbusiness innovation in these fields.

IMASIMAS, using MILLERALTM for turnkey flourmilling systems, and VITERALTM for turnkeyfeed milling systems performsmanufacturing, marketing and serviceprocesses within international norms withits professional and experienced staff.IMAS provides: - From single machines to complete turn-

key projects for flour, semolina, maize and feed mills;

- Project and supply: Flow diagrams, construction and projects;

- Manufacturing: Milling machinery and equipment, electric switchboards, automation and computerized systems;

- Site activities: Set-up and management of sites, plant supervision and erection, plant start-up and commissioning;

- Services: Technical/ technological assistance and after-sale service, mechanical, electrical and electronic maintenance and spare parts service, plant upgrading and expansion.

Jacobs (NanTong) Eng. & Mach. Co, LtdWith the headquarters in Iowa States,Jacobs Corporation has the world’s largestand technology leading pellet and hammermill parts manufacturing facilities with over80 years experiences. We have over 70% market share in Pellet

dies, shells, hammers and screens inUnited States. To strengthen Jacobs abilityto continue to assist the world’s top feedproducers to improve the operations withlower costs, the company invested a newfacility in China.

Jinan Sunpring Machinery &Equipment Co, LtdJinan Sunpring Machinery & Equipment Co,Ltd is a leading manufacturer of high qualityTwin Screw Extruders for pet and fish foodindustries. We have years’ experience ofworking with our customers providingspecialist designs and practical solutions fora wide range of process needs. The latestComputer Aided Design (CAD) technologyis used by our experienced design team. We can keep product design in the same

level with internationally advancedtechnology consistently. The maximumcapacity of twin screw extruder can be upto 5000kg per hour. We can also makespecial designs for special productsaccording to clients' special requirements.

Kasetphand Industry Co, Ltd (KPI)Kasetphand Industry Co, Ltd (KPI) is asubsidiary of Charoen Pokphand Group(CPF). Established over than 49 years withan experience of FEED Mill Machinery andGrain Storage Systems, FARM andPrefabricated Building, FOOD ProcessingMachinery and Equipment. In addition, implement the best

systematical providing in After-SaleServices, including “Feed – Farm – Food”as Turnkey Innovation Services, Sourcing ahigh technology, innovative product as wellas environmentally friendly in response tocustomer requirement under the excellentservice. We are proud to be a part ofcustomer business success through yearsby “Serve The Best Step Forward”.

Lambton Conveyor LimitedLambton is a manufacturer of galvanizedmaterial handling and grain storageequipment since 1965. Some of our equipment consists of farm

and commercial grain silos ranging from 40to 27,699 tons, hopper tanks, bulk feedtanks, flat bottom, incline and self-cleaningU-trough chain conveyors, screwconveyors, belt conveyors and bucketelevators up to 1500 mt/hr which include avariety of accessories, as Pendulum, fullround and flat back distributors, valves,conveying loop system, grain cannons,

gravity and drum pre-cleaners, catwalks,towers, unload augers and more. Visit our website for more details and

specifications at www.lambtonconveyor.com

Logos Packaging Holdings LtdLogos Packaging offers variety of flexiblepackaging such as Quad Seal Flat BottomBag, Stand up Pouch, Flat Pouch withdifferent reclose features such as Press-To-Close zipper, Top slider Zipper, Easy Lock(hood-hook) zipper and pocket zipper...etc. With two international food packaging

standard of BRC regonised factories inChina, Logos flexible packaging have beensupplying pet food and flour powder formany years, with good track record fromdomestic market and overseas market. Logos Packaging is your best partner in

flexible packaging aspect.

MEAPYou are kindly invited to visited our website:www.meap.net

MORILLONFounded in 1865, MORILLON is a Frenchcompany, specialist of silo unloadingsystems (design, manufacture, commission-ing and maintenance worldwide). Our range :- SPIROGYRE system :The MORILLON sweep-auger is designedto reclaim the remaining free-flowingproducts (wheat, corn, barley, pellets…)once the gravity unload has beencompleted in flat bottom silos. The fullyautomatic design of the SPIROGYREallows a safe and reliable reclaim inside thesilo, without any labor required. - HYDRAUGYRE system :The HYDRASCREW range is speciallydesigned to unload difficult to flowmaterials, heavy or light, powdery or fibrous,dry or damp. These unloading systemsoperate with a fully hydraulic transmission insilos ranging from 2 to 25 meters indiameter. Reliable and sturdy, they transmithigh torques at low speed. The planetaryscrew ensures a “First-In – First-out”emptying of the silo. We are looking forward to welcoming you

on our stand no C155.

MÜNCH-Edelstahl GmbHMÜNCH-Edelstahl GmbH in Hilden(Germany) is one of the leading worldwideexporting manufacturers of pellet presses,complete pellet mill- and grinder-lines aswell as high-quality spare parts for own andall market accompanying pellet mills. MÜNCH plans, develops and constructs

with more than 40 years of experiencemachines and installations in the pelletizingsector as for example the feed mill-pelletizing and the wood-pelletizing.MÜNCH’s service and delivery program

exhibitor previews

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 33

33Showtime

Hunan XiangLiang MachineryManufacture Co, LtdHunan XiangLiang Machinery ManufactureCo, Ltd was established in1956, weproduce a series rice milling machines, aseries of grain unloaders. Our productions are hot selling with most

competitively price and highly quality withour professional international after service.Contact person: Ms Cathy

Tel: 008613467696115Email:[email protected]

Hydronix LtdMoisture Sensors for Feed and Grain.Hydronix is the world’s leading manufacturerof digital microwave moisture sensors. Designed to work in flowing materials our

sensors are ideally suited to the feed andgrain industry and provide a simplesolution to ensure that grain is always atthe optimum moisture level for processingor storage.Installation is simple with the sensors

positioned in the flow of materials in silos,mixers, pelletisers, conveyors or before /after a dryer. The Hydro-Probe XT is designed for silos

and conveyors and the Hydro-Mix is flushmounted making it suitable for screwconveyors and mixers.Visit: www.hydronix.com

IDAH Co, LtdIDAH is recognized as a leading innovatorof process equipment and processing plantturn-key solution provider for food, feedand biomass industry. With comprehensive product ranges and

customize design services, IDAH is yourmost trust-worthy partner to empower yourbusiness innovation in these fields.

IMASIMAS, using MILLERALTM for turnkey flourmilling systems, and VITERALTM for turnkeyfeed milling systems performsmanufacturing, marketing and serviceprocesses within international norms withits professional and experienced staff.IMAS provides: - From single machines to complete turn-

key projects for flour, semolina, maize and feed mills;

- Project and supply: Flow diagrams, construction and projects;

- Manufacturing: Milling machinery and equipment, electric switchboards, automation and computerized systems;

- Site activities: Set-up and management of sites, plant supervision and erection, plant start-up and commissioning;

- Services: Technical/ technological assistance and after-sale service, mechanical, electrical and electronic maintenance and spare parts service, plant upgrading and expansion.

Jacobs (NanTong) Eng. & Mach. Co, LtdWith the headquarters in Iowa States,Jacobs Corporation has the world’s largestand technology leading pellet and hammermill parts manufacturing facilities with over80 years experiences. We have over 70% market share in Pellet

dies, shells, hammers and screens inUnited States. To strengthen Jacobs abilityto continue to assist the world’s top feedproducers to improve the operations withlower costs, the company invested a newfacility in China.

Jinan Sunpring Machinery &Equipment Co, LtdJinan Sunpring Machinery & Equipment Co,Ltd is a leading manufacturer of high qualityTwin Screw Extruders for pet and fish foodindustries. We have years’ experience ofworking with our customers providingspecialist designs and practical solutions fora wide range of process needs. The latestComputer Aided Design (CAD) technologyis used by our experienced design team. We can keep product design in the same

level with internationally advancedtechnology consistently. The maximumcapacity of twin screw extruder can be upto 5000kg per hour. We can also makespecial designs for special productsaccording to clients' special requirements.

Kasetphand Industry Co, Ltd (KPI)Kasetphand Industry Co, Ltd (KPI) is asubsidiary of Charoen Pokphand Group(CPF). Established over than 49 years withan experience of FEED Mill Machinery andGrain Storage Systems, FARM andPrefabricated Building, FOOD ProcessingMachinery and Equipment. In addition, implement the best

systematical providing in After-SaleServices, including “Feed – Farm – Food”as Turnkey Innovation Services, Sourcing ahigh technology, innovative product as wellas environmentally friendly in response tocustomer requirement under the excellentservice. We are proud to be a part ofcustomer business success through yearsby “Serve The Best Step Forward”.

Lambton Conveyor LimitedLambton is a manufacturer of galvanizedmaterial handling and grain storageequipment since 1965. Some of our equipment consists of farm

and commercial grain silos ranging from 40to 27,699 tons, hopper tanks, bulk feedtanks, flat bottom, incline and self-cleaningU-trough chain conveyors, screwconveyors, belt conveyors and bucketelevators up to 1500 mt/hr which include avariety of accessories, as Pendulum, fullround and flat back distributors, valves,conveying loop system, grain cannons,

gravity and drum pre-cleaners, catwalks,towers, unload augers and more. Visit our website for more details and

specifications at www.lambtonconveyor.com

Logos Packaging Holdings LtdLogos Packaging offers variety of flexiblepackaging such as Quad Seal Flat BottomBag, Stand up Pouch, Flat Pouch withdifferent reclose features such as Press-To-Close zipper, Top slider Zipper, Easy Lock(hood-hook) zipper and pocket zipper...etc. With two international food packaging

standard of BRC regonised factories inChina, Logos flexible packaging have beensupplying pet food and flour powder formany years, with good track record fromdomestic market and overseas market. Logos Packaging is your best partner in

flexible packaging aspect.

MEAPYou are kindly invited to visited our website:www.meap.net

MORILLONFounded in 1865, MORILLON is a Frenchcompany, specialist of silo unloadingsystems (design, manufacture, commission-ing and maintenance worldwide). Our range :- SPIROGYRE system :The MORILLON sweep-auger is designedto reclaim the remaining free-flowingproducts (wheat, corn, barley, pellets…)once the gravity unload has beencompleted in flat bottom silos. The fullyautomatic design of the SPIROGYREallows a safe and reliable reclaim inside thesilo, without any labor required. - HYDRAUGYRE system :The HYDRASCREW range is speciallydesigned to unload difficult to flowmaterials, heavy or light, powdery or fibrous,dry or damp. These unloading systemsoperate with a fully hydraulic transmission insilos ranging from 2 to 25 meters indiameter. Reliable and sturdy, they transmithigh torques at low speed. The planetaryscrew ensures a “First-In – First-out”emptying of the silo. We are looking forward to welcoming you

on our stand no C155.

MÜNCH-Edelstahl GmbHMÜNCH-Edelstahl GmbH in Hilden(Germany) is one of the leading worldwideexporting manufacturers of pellet presses,complete pellet mill- and grinder-lines aswell as high-quality spare parts for own andall market accompanying pellet mills. MÜNCH plans, develops and constructs

with more than 40 years of experiencemachines and installations in the pelletizingsector as for example the feed mill-pelletizing and the wood-pelletizing.MÜNCH’s service and delivery program

exhibitor previews

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 33

Page 34: Showtime 21-1

34 Showtime

exhibitor previews

covers the entire duration of a pellet press –from the development through theengineering, testing and production of newpress systems and spare parts tomaintenance services.

Muller Beltex b.v.Muller Beltex is your service and knowledgesupplier of reliable components for the bulkhandling industry. Muller Beltex supplyworld-wide a complete range ofcomponents for bucket elevators, such asPOLYSUR® elevator belts, plastic and steelelevator buckets, bolts, belt fasteners,drive- and return pulleys, pulley laggingsand electronic safety process monitoringsystems. We offer a full service in providing capacity

calculations and engineered “mosteconomical” design recommendations forupgrading existing bucket elevators orconstructing new elevators.With our 60+ years of experience, we haveproven ourselves, both nationally andinternationally, as your solid partner insustainable solutions for bucket elevators.

Newtec Bag PalletizingNewtec Bag Palletizing is a Frenchcompany, based in the Eastern part ofFrance, close to Germany and Switzerland.We have successfully been designing andmanufacturing high quality palletizingtechnology for over 40 years. With morethan 1,700 machines sold all over theworld, we are one of the market leaders inour field. With a particular focus on the animal feed

industry, we relish the challenge ofproducing clean, stable and compact filledbags stacks, perfectly adapted to theupstream bagging process. Our productscover a wide range of production capacitylevels going from 300 up to 5 000 bagsper hour.

NuscienceNuscience Group is a global producer ofpremix, concentrates, mineral mixes, feedfor young animals and additives for theanimal feed industry. With more than 1000employees worldwide and an innovation-driven attitude, we are capable of providingsustainable and economically feasiblesolutions for the efficient production ofanimal feeds and animal feed raw materials. We focus on offering a wide range of

products for livestock feed companies,integrations and self-mixers. Ourcommitment to be the knowledge partnerof choice in animal feeds and animal healthguarantees quality and top performance ofour products and support.

Olmix Based in France, Olmix is a leading supplierof natural solutions based on clay and

seaweed for animal production.At VICTAM Asia 2016, booth number

B063, Olmix will showcase its new product.Called ‘MFeed+,’ it is based on Olmix’spatented technology namely OlmixExfoliated Algoclay or OEA. OEA iscomposed of a micronized Montmorillonitewhich is exfoliated with specific seaweedextracts. Trials in fish, pigs and poultry showed that

MFeed+ significantly improved in growthand performance due to the followingprocess1. Increased contact between enzymes

and substrate2. Increased activity of enzymes3. Better digestion and more nutrients for

absorption

Optima Pressformen GmbH Co. KGPellet Dies made in Germany.Welcome to Optima Pressformen GmbH.

Optimize your business with Optima. Wemanufacture and supply a large assortmentof pellet dies, roller Shells and other wearparts for nearly all types of pellet mills.We cater for many applications such asfeed milling, aqua feed, sugar beet,human food, wood, waste and thechemical industry.With 50 years of experience in

manufacturing pellet dies we haveaccumulated a superior know-how in everydetail that matters for quality.

Perten ImstrumentsAt-line and On-line NIR analysis of feed,grain and flour.Perten’s new diode array based line of

NIR analyzers brings lab accuracy toprocess environments, improving efficiencyand quality. Measure at the intake, in theprocess and in the lab. The DA 7250At-line NIR is optimized for analysis of feed, flour, grains and other ingredients. The DA 7300 In-line NIR provides real-timemeasurement of flour, feed and more inpipes, chutes and similar. The DA 7440On-line NIR measures materialstransported on open conveyor belts. Moisture, protein, ash, fat, amino acids

and many other measurements areavailable.

Petkus Engineering GmbHPetkus Engineering Roller Mill WW 415 orWW 418 – Individual. Unique. According toyou demands and design.Due to its universal applicability in and for

all kinds of mills and industry purposesplus the different set up which can bemade we set new standards among theFeed industry.This new Roller Mill meets the demands of

many milling challenges from gentle millingof grains and semi-finished goods throughto final products as well as the milling of

other products typically used in the Feedand food industry. Beside the technicaladvantages the energy saving aspect wasone of our targets. The KW/t production isthe lowest in the grinding Industry. Advantages: adjustable speed for each

roll, thereby optimal granulation, withminimum energy consumption

PLP Liquid Systems SrlPLP Liquid Systems has acquired our 35years’ experience the Feed Industry Sectorspecializing in dosing, coating and sprayingtechnology for both liquid and powderapplications. Our systems include:

Powder Dosing: Nano Scale offering anadvanced technology for medicine andvitamin weighing and dosing.Liquid Dosing: Suitable for amino acids,acids, fats and molasses.Homogenizing: Liquid addition andhomogenizing before the addition into themixer.Spraying : Motorized sprayers for molasses,oils and other liquids. Coating : New technology for pellet milkcoating systems, PPLA for enzymes,probiotics and yeast.Micro Encapsulation: Complete systems foramino acids and vitamins.

R K Bio Feed MachineR K Bio Feed Machine – RKBFM – is areputed turnkey solutions provider forpelleting of Animal Feed & Bio-fuel;equipped with wide range of machinery forcooling, mixing, crushing, pelleting, grindingalong with PLC and SCADA basedautomation and spares support through in-house spares division.Our offering includes:- Turnkey solutions with machines like Pellet

Mill, Hammer Mill, Counter Flow Cooler, Crumbler, Mixer, Sieve etc.

- Plant automation and process monitoring system

- High performance G-chrome™ pellet die (from hole ø 1.4 mm to 12 mm) and other spares.

Visit us at VICTAM Asia 2016 (stand D081)See more at: www.rkbfm.com

Rueter Maschinenbau GmbH & Co, KGRueter Maschinenbau is a mechanicalengineering firm located in Germany. We will present our key product line of

highly efficient and compact plansifters forthe milling and feed industry.

SCAFCO Grain Systems CompanySCAFCO Grain Systems is a market leaderin the design and manufacturing ofcorrugated galvanized grain storagesolutions. SCAFCO engineers customdesign to meet individual requirements and

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 34

34 Showtime

exhibitor previews

covers the entire duration of a pellet press –from the development through theengineering, testing and production of newpress systems and spare parts tomaintenance services.

Muller Beltex b.v.Muller Beltex is your service and knowledgesupplier of reliable components for the bulkhandling industry. Muller Beltex supplyworld-wide a complete range ofcomponents for bucket elevators, such asPOLYSUR® elevator belts, plastic and steelelevator buckets, bolts, belt fasteners,drive- and return pulleys, pulley laggingsand electronic safety process monitoringsystems. We offer a full service in providing capacity

calculations and engineered “mosteconomical” design recommendations forupgrading existing bucket elevators orconstructing new elevators.With our 60+ years of experience, we haveproven ourselves, both nationally andinternationally, as your solid partner insustainable solutions for bucket elevators.

Newtec Bag PalletizingNewtec Bag Palletizing is a Frenchcompany, based in the Eastern part ofFrance, close to Germany and Switzerland.We have successfully been designing andmanufacturing high quality palletizingtechnology for over 40 years. With morethan 1,700 machines sold all over theworld, we are one of the market leaders inour field. With a particular focus on the animal feed

industry, we relish the challenge ofproducing clean, stable and compact filledbags stacks, perfectly adapted to theupstream bagging process. Our productscover a wide range of production capacitylevels going from 300 up to 5 000 bagsper hour.

NuscienceNuscience Group is a global producer ofpremix, concentrates, mineral mixes, feedfor young animals and additives for theanimal feed industry. With more than 1000employees worldwide and an innovation-driven attitude, we are capable of providingsustainable and economically feasiblesolutions for the efficient production ofanimal feeds and animal feed raw materials. We focus on offering a wide range of

products for livestock feed companies,integrations and self-mixers. Ourcommitment to be the knowledge partnerof choice in animal feeds and animal healthguarantees quality and top performance ofour products and support.

Olmix Based in France, Olmix is a leading supplierof natural solutions based on clay and

seaweed for animal production.At VICTAM Asia 2016, booth number

B063, Olmix will showcase its new product.Called ‘MFeed+,’ it is based on Olmix’spatented technology namely OlmixExfoliated Algoclay or OEA. OEA iscomposed of a micronized Montmorillonitewhich is exfoliated with specific seaweedextracts. Trials in fish, pigs and poultry showed that

MFeed+ significantly improved in growthand performance due to the followingprocess1. Increased contact between enzymes

and substrate2. Increased activity of enzymes3. Better digestion and more nutrients for

absorption

Optima Pressformen GmbH Co. KGPellet Dies made in Germany.Welcome to Optima Pressformen GmbH.

Optimize your business with Optima. Wemanufacture and supply a large assortmentof pellet dies, roller Shells and other wearparts for nearly all types of pellet mills.We cater for many applications such asfeed milling, aqua feed, sugar beet,human food, wood, waste and thechemical industry.With 50 years of experience in

manufacturing pellet dies we haveaccumulated a superior know-how in everydetail that matters for quality.

Perten ImstrumentsAt-line and On-line NIR analysis of feed,grain and flour.Perten’s new diode array based line of

NIR analyzers brings lab accuracy toprocess environments, improving efficiencyand quality. Measure at the intake, in theprocess and in the lab. The DA 7250At-line NIR is optimized for analysis of feed, flour, grains and other ingredients. The DA 7300 In-line NIR provides real-timemeasurement of flour, feed and more inpipes, chutes and similar. The DA 7440On-line NIR measures materialstransported on open conveyor belts. Moisture, protein, ash, fat, amino acids

and many other measurements areavailable.

Petkus Engineering GmbHPetkus Engineering Roller Mill WW 415 orWW 418 – Individual. Unique. According toyou demands and design.Due to its universal applicability in and for

all kinds of mills and industry purposesplus the different set up which can bemade we set new standards among theFeed industry.This new Roller Mill meets the demands of

many milling challenges from gentle millingof grains and semi-finished goods throughto final products as well as the milling of

other products typically used in the Feedand food industry. Beside the technicaladvantages the energy saving aspect wasone of our targets. The KW/t production isthe lowest in the grinding Industry. Advantages: adjustable speed for each

roll, thereby optimal granulation, withminimum energy consumption

PLP Liquid Systems SrlPLP Liquid Systems has acquired our 35years’ experience the Feed Industry Sectorspecializing in dosing, coating and sprayingtechnology for both liquid and powderapplications. Our systems include:

Powder Dosing: Nano Scale offering anadvanced technology for medicine andvitamin weighing and dosing.Liquid Dosing: Suitable for amino acids,acids, fats and molasses.Homogenizing: Liquid addition andhomogenizing before the addition into themixer.Spraying : Motorized sprayers for molasses,oils and other liquids. Coating : New technology for pellet milkcoating systems, PPLA for enzymes,probiotics and yeast.Micro Encapsulation: Complete systems foramino acids and vitamins.

R K Bio Feed MachineR K Bio Feed Machine – RKBFM – is areputed turnkey solutions provider forpelleting of Animal Feed & Bio-fuel;equipped with wide range of machinery forcooling, mixing, crushing, pelleting, grindingalong with PLC and SCADA basedautomation and spares support through in-house spares division.Our offering includes:- Turnkey solutions with machines like Pellet

Mill, Hammer Mill, Counter Flow Cooler, Crumbler, Mixer, Sieve etc.

- Plant automation and process monitoring system

- High performance G-chrome™ pellet die (from hole ø 1.4 mm to 12 mm) and other spares.

Visit us at VICTAM Asia 2016 (stand D081)See more at: www.rkbfm.com

Rueter Maschinenbau GmbH & Co, KGRueter Maschinenbau is a mechanicalengineering firm located in Germany. We will present our key product line of

highly efficient and compact plansifters forthe milling and feed industry.

SCAFCO Grain Systems CompanySCAFCO Grain Systems is a market leaderin the design and manufacturing ofcorrugated galvanized grain storagesolutions. SCAFCO engineers customdesign to meet individual requirements and

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 34

Page 35: Showtime 21-1

Presented by

Sponsored by

Where the Global Pet Food Industry Does Business

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

REGISTER TODAY TO RESERVE YOUR PLACE!

Pet Food IndustryPet Food Industry

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲▲

▲✍

Enjoy valuable networking opportunities

with peers from throughout Southeast

Asia and the world, while hearing the

latest research and information on the

pet food market.Asia

TO REGISTER GO TO:

PetfoodForumEvents.com

Bangkok International Trade & Exhibition Center (BITEC), Bangkok, Thailand

Co-located with the VICTAM/ FIAAP/GRAPAS Asia 2016 Exhibitions.

MARCH 30, 2016

Frank Yiannas, Vice president of Food Safety, Walmart Inc.Opening session: Why pet food manufacturers should develop a food safety culture

Mariko Takemura, Lead Analyst, Euromonitor InternationalPet food dynamics: update on the global and Asian markets

Andrew Mallison, General Director, IFFO Ltd.Fish-based ingredients for pet food manufacturing

DON’T MISS

THESE FEATURED

SPEAKERS!

Page 36: Showtime 21-1

has supplied grain storage projects tomore than 80 countries worldwide.SCAFCO products are engineered forquick on-site assembly, simple operation,and lasting quality.

SCE – Silo Construction &EngineeringSCE aims to be the preferred partner fordesign, engineering, production andassembly of industrial building solutionsthat includes integration of our modularsquare silos seamlessly with SCE-suppliedsteel structures.The demand for food is increasing with

the growing global population. To keep up,food and feed producing companies willhave to acquire higher levels of efficiency.SCE helps such companies achieve this

efficiency as a partner in modular processbuildings. Our solution takes up less space,needs less time to assemble and workperfectly in any production unit, helping ourcustomer focus fully on extracting maximumvalue from their process.We have and continue to deliver to

satisfied customers all over the world.Visit us at FIAAP/VICTAM/GRAPAS Asia

2016 – stand C099.

Schenck Process Join Schenck Process in booth B093 forinformation on how its E-finity® PneumaticConveying Systems, MechaTron® DryMaterial Feeders, MULTIDOS®

Weighfeeders, MULTICOR® Mass FlowMeters and ModuPlasma Odor AbatementSystems can provide the material handlingand air pollution control solutions your petfood and animal feed process may require.

Schmiedewerke Gröditz GmbHSchmiedewerke Gröditz GmbH – foundedin 1779 – supplies stainless + tool steels /bars + blocks / open-die forgings andseamless rolled rings. We are the leading supplier for seamless

rolled rings used as pellet dies and supplythem to well-known companies all over theworld. Within our company seamless rolledrings for pellet dies are produced using ourown steel basis and specialized heattreatment procedure to ensure the highestquality, outstanding machinability andappropriate lifetime. We cover the wholesize range for seamless rolled rings usedfor producing any kind of pellets.Please visit us at the VICTAM Asia 2016

exhibition at booth C081, we look forwardto seeing you!

Silos Cordoba S.L.Silos Cordoba is a leading manufacturer ofmetal silos for grain storage: FLAT SILOS,HOPPER SILOS, TRUCK LOAD SILOS andFARM SILOS. We manufacture silos that range in size

from 3,5 tonnes to 26.850 tonnes withdiameters available from 1,85 meters up to41,25 meters. In addition to a largeselection of grain storage solutions wemanufacture a full line of handlingequipment in order to propose completeturn-key projects to our customer. We alsomanufacture livestock equipment. High quality, in-house engineering team,

presence in 45 countries, which is why weare able to provide longer guarantees forour products.

Sioux Steel CompanySioux Steel Company, established in 1918and based in Sioux Falls, South Dakota,USA, is the world oldest grain silos/binsmanufacturing company. Sioux Steel provides the longest i.e. 10

year warranties on its silos. Sioux SteelCompany has world class products andwide range of grain storage Flat BottomSilos/Bins, Hopper Bottom Silos/Bins,Structural Building, Paddle Sweep, DustSuppression System etc. Sioux Steel Company manufactures full

line of farm and commercial silos from 15’(4.57 meter) diameter up to 132’ (40.23meter) diameter and hopper bottom feedand grain silos from 6’ (1.8 meter) diameterup to 36’ (11 meter) diameter.

Sonac – Darling IngredientsWith more than a century of experience,Darling Ingredients provides a globalplatform for the development and theproduction of sustainable naturalingredients. As a partner trusted by feedmanufacturers worldwide, we deliver qualitysolutions to customers and add security tothe supply chain. At FIAAP Asia our brands DAR PRO

Ingredients and Sonac will present theirreliable, nutritional and high-quality animalproteins and fats for a wide range ofapplications in swine, poultry and aquafeed. This enables you, as a manufacturerto continually provide essential nutrients,improve feed efficiency, and make morepalatable products for your customers andmarkets.

Soon Soon Group Soon Soon Oilmills Sdn. Bhd. is adiversified and integrated grain and oilprocessing concern, producing food andfeed ingredients. Our company hasinnovated in soybean meals through a highefficiency processing method to increase itsamino acids and energy availability. These value added soybean meals had

been proven to improve animal growthperformance from numerous feeding trialsdone in broiler and swine. We have furtherextended this technology to other legumeand oilseed such as Canola, Lupin andSunflower.

SopropêcheFor over 45 years, Sopropêche isinternationally recognized as a leadingexpert in the areas of animal feed,aquaculture and petfood by providinginnovative nutrients.Sopropêche offers two fish protein

hydrolysates (CPSP® 90 / CPSP® G)considered as one of the best marineprotein sources. Our product portfolioalso consists of fishmeal and fish oil,vegetable proteins, land animal proteins,yeasts and additives.

Studio Tecnico Appiani S.r.l.Leading technology for parboiling and otherhydrothermal processing plants.Studio Tecnico Appiani S.r.l. is specialized

in the design and manufacture of fullyautomated hydrothermal processing plantsfor producing parboiled rice and othercereal based products:Products:- Parboiling plants with various batch and

continues pressure cooking technologies to produce any rice colour to market requirement.

- Other hydrothermal processes for a variety of quick-cooking rice products and other pre-cooked foods such as bulgur and pulses.

Services:- Engineering, manufacturing and erecting

of complete new plants.- Upgrading of existing plants.- Custom development of special

hydrothermal processes.

Sukup Manufacturing Co.Sukup Manufacturing Co. is a family-ownedmanufacturer of grain bins, grain dryers,material handling equipment and pre-engineered metal buildings. Sukup Mfg isthe world’s fastest growing bin companyand largest family-owned companylocated in the heart of rich, Midwesternfarmland (USA). Sukup has over 50 yearsof experience.Sukup’s product line includes farm/

commercial grain bins, portable graindryers, tower dryers, axial /centrifugal fans,stirring machines, bin unloading equipment,and bin floors/ supports. Sukupmanufactures material handling equipment:bucket elevators, drag conveyors, hy-flights,chain loop and double-run conveyors.Sukup Manufacturing’s mission is to

protect and preserve the world’s grainsupply.

Sun Magnetic Sys-Tech Co, LtdSun Magnetic Sys-Tech Co, Ltd founded in2001 in Beijing, China, as a professionalmanufacturer of permanent magneticsystem, we have more than ten years ofexperience in research and development,design and manufacture.

exhibitor previews

36 Showtime

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 36

has supplied grain storage projects tomore than 80 countries worldwide.SCAFCO products are engineered forquick on-site assembly, simple operation,and lasting quality.

SCE – Silo Construction &EngineeringSCE aims to be the preferred partner fordesign, engineering, production andassembly of industrial building solutionsthat includes integration of our modularsquare silos seamlessly with SCE-suppliedsteel structures.The demand for food is increasing with

the growing global population. To keep up,food and feed producing companies willhave to acquire higher levels of efficiency.SCE helps such companies achieve this

efficiency as a partner in modular processbuildings. Our solution takes up less space,needs less time to assemble and workperfectly in any production unit, helping ourcustomer focus fully on extracting maximumvalue from their process.We have and continue to deliver to

satisfied customers all over the world.Visit us at FIAAP/VICTAM/GRAPAS Asia

2016 – stand C099.

Schenck Process Join Schenck Process in booth B093 forinformation on how its E-finity® PneumaticConveying Systems, MechaTron® DryMaterial Feeders, MULTIDOS®

Weighfeeders, MULTICOR® Mass FlowMeters and ModuPlasma Odor AbatementSystems can provide the material handlingand air pollution control solutions your petfood and animal feed process may require.

Schmiedewerke Gröditz GmbHSchmiedewerke Gröditz GmbH – foundedin 1779 – supplies stainless + tool steels /bars + blocks / open-die forgings andseamless rolled rings. We are the leading supplier for seamless

rolled rings used as pellet dies and supplythem to well-known companies all over theworld. Within our company seamless rolledrings for pellet dies are produced using ourown steel basis and specialized heattreatment procedure to ensure the highestquality, outstanding machinability andappropriate lifetime. We cover the wholesize range for seamless rolled rings usedfor producing any kind of pellets.Please visit us at the VICTAM Asia 2016

exhibition at booth C081, we look forwardto seeing you!

Silos Cordoba S.L.Silos Cordoba is a leading manufacturer ofmetal silos for grain storage: FLAT SILOS,HOPPER SILOS, TRUCK LOAD SILOS andFARM SILOS. We manufacture silos that range in size

from 3,5 tonnes to 26.850 tonnes withdiameters available from 1,85 meters up to41,25 meters. In addition to a largeselection of grain storage solutions wemanufacture a full line of handlingequipment in order to propose completeturn-key projects to our customer. We alsomanufacture livestock equipment. High quality, in-house engineering team,

presence in 45 countries, which is why weare able to provide longer guarantees forour products.

Sioux Steel CompanySioux Steel Company, established in 1918and based in Sioux Falls, South Dakota,USA, is the world oldest grain silos/binsmanufacturing company. Sioux Steel provides the longest i.e. 10

year warranties on its silos. Sioux SteelCompany has world class products andwide range of grain storage Flat BottomSilos/Bins, Hopper Bottom Silos/Bins,Structural Building, Paddle Sweep, DustSuppression System etc. Sioux Steel Company manufactures full

line of farm and commercial silos from 15’(4.57 meter) diameter up to 132’ (40.23meter) diameter and hopper bottom feedand grain silos from 6’ (1.8 meter) diameterup to 36’ (11 meter) diameter.

Sonac – Darling IngredientsWith more than a century of experience,Darling Ingredients provides a globalplatform for the development and theproduction of sustainable naturalingredients. As a partner trusted by feedmanufacturers worldwide, we deliver qualitysolutions to customers and add security tothe supply chain. At FIAAP Asia our brands DAR PRO

Ingredients and Sonac will present theirreliable, nutritional and high-quality animalproteins and fats for a wide range ofapplications in swine, poultry and aquafeed. This enables you, as a manufacturerto continually provide essential nutrients,improve feed efficiency, and make morepalatable products for your customers andmarkets.

Soon Soon Group Soon Soon Oilmills Sdn. Bhd. is adiversified and integrated grain and oilprocessing concern, producing food andfeed ingredients. Our company hasinnovated in soybean meals through a highefficiency processing method to increase itsamino acids and energy availability. These value added soybean meals had

been proven to improve animal growthperformance from numerous feeding trialsdone in broiler and swine. We have furtherextended this technology to other legumeand oilseed such as Canola, Lupin andSunflower.

SopropêcheFor over 45 years, Sopropêche isinternationally recognized as a leadingexpert in the areas of animal feed,aquaculture and petfood by providinginnovative nutrients.Sopropêche offers two fish protein

hydrolysates (CPSP® 90 / CPSP® G)considered as one of the best marineprotein sources. Our product portfolioalso consists of fishmeal and fish oil,vegetable proteins, land animal proteins,yeasts and additives.

Studio Tecnico Appiani S.r.l.Leading technology for parboiling and otherhydrothermal processing plants.Studio Tecnico Appiani S.r.l. is specialized

in the design and manufacture of fullyautomated hydrothermal processing plantsfor producing parboiled rice and othercereal based products:Products:- Parboiling plants with various batch and

continues pressure cooking technologies to produce any rice colour to market requirement.

- Other hydrothermal processes for a variety of quick-cooking rice products and other pre-cooked foods such as bulgur and pulses.

Services:- Engineering, manufacturing and erecting

of complete new plants.- Upgrading of existing plants.- Custom development of special

hydrothermal processes.

Sukup Manufacturing Co.Sukup Manufacturing Co. is a family-ownedmanufacturer of grain bins, grain dryers,material handling equipment and pre-engineered metal buildings. Sukup Mfg isthe world’s fastest growing bin companyand largest family-owned companylocated in the heart of rich, Midwesternfarmland (USA). Sukup has over 50 yearsof experience.Sukup’s product line includes farm/

commercial grain bins, portable graindryers, tower dryers, axial /centrifugal fans,stirring machines, bin unloading equipment,and bin floors/ supports. Sukupmanufactures material handling equipment:bucket elevators, drag conveyors, hy-flights,chain loop and double-run conveyors.Sukup Manufacturing’s mission is to

protect and preserve the world’s grainsupply.

Sun Magnetic Sys-Tech Co, LtdSun Magnetic Sys-Tech Co, Ltd founded in2001 in Beijing, China, as a professionalmanufacturer of permanent magneticsystem, we have more than ten years ofexperience in research and development,design and manufacture.

exhibitor previews

36 Showtime

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 36

Page 37: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 37

Page 38: Showtime 21-1

38 Showtime

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 38

Page 39: Showtime 21-1

With advanced technology and richexperience, we are focus on providingcustomers with customized solution ofMagnetic separators in food industry. In theprocess of entire service, top quality andcontinuous improvement are our perpetualcommitment to customers We are happy to share with you our

experience.

SymagaSymaga is a Spanish company specializingin the design, manufacture and supply ofsteel silos for storing seeds, cereals, malts,oilseeds, grains and pellets, and rice for theagriculture, agro-industry, biofuels andbiomass industries. The company has more than 30 years of

experience and over 15 million m³ ofstorage space worldwide, ensuring thecapacity to tackle any project.Symaga supplies a wide range of silos, flat

bottom up to 25,000 cubic meters, andhopper silos reaching 12 meters in diameterwith 45-degree hopper and 2,649 cubicmeters capacity, completely galvanized andthe double welded compression ring.Symaga provides Z600 gr/m² galvanization,and continues to invest in research anddevelopment, allowing it to develop newproducts such as ventilated cones and fullyperforated floors, to meet customer needs.

SynbioTech IncorporationSynbioTech Incorporation, founded in 2000,has devoted to research and manufactureof probiotics for animal health and humanbeings. With our core competencySYNTEK® thorough, we designed the highviable probiotic solution, SYNLAC®

products, for poultry, livestock, andaquaculture to replace antibiotics in orderto the aim of sustainable development.

Top Silo Constructions Top Silo Constructions is a silo supplier andhas been focusing on the design andconstruction of rectangular steel siloinstallations. As a square silo manufacturerTSC has completed numerous projectsaround the world. These product prove ourknowledge in the area of bulk and solidsstorage, day in day out.The flexible modular square silo system is

always customized for your storagedemands. Typically, our silos have thefollowing capacities:- Total silo block from 30 – 30.000m3

(or more)- Individual bin from 5 – 500 m3

- Total number of bins in a silo block from 2 – 200 (or more)

TORNUM ABTORNUM manufactures all ranges ofdryers, from batch dryers to BIG dryers witha capacity of 300 tons per hour.

TORNUM IDC, Intelligent Dryer Control, isa unique concept offering precise controlthroughout the drying process. In the heatrecovery dryers the energy consumption isreduced by up to 30%.

Tyson Foods, Inc. Animal NutritionGroupFrom our earliest years as a company, ourfounder John W. Tyson, made chicken feedto ensure the quality and quantity heneeded for a growing business. Soon,Tyson’s Feed and Hatchery was a trustedname in the business. And every bag offeed proudly proclaimed: There is nosubstitute for quality.We believe that statement is as true today

as it was then.Our offerings include 100 percent chicken-

based products: Chicken Meal, Chicken ByProduct Meal, Chicken Fats, Wet PetIngredients, Nutraceuticals and SpecialtyProtein Blends.

Van AarsenVan Aarsen is developer, manufacturer andsupplier of state of the art machines andcomplete feed mill solutions for theproduction of compound feed andpremixes. The better the animal feed, the better the

food on the table! It’s as simple as that. Wetake our crucial role in the ‘agro-feed’ chainseriously, helping you to achieve optimalsolutions. Our innovative machines and complete

feed mill solutions are designed andconstructed to increase production andlower operational costs; with minimumenergy consumption and maximum benefitto feed safety and ease of operation. Since 1949. Worldwide.Feedmills of the future are here today.

What does the future hold for feed milltechnology? The future is more efficiency,while increasing feed quality. The future ishigher production and lower energyconsumption. The future is fully automatedlines producing lower costs per ton. Thefuture is smart engineering concepts usingstate-of-the-art technology. The future is here today, with smart feed

mills from Van Aarsen. [email protected], www.aarsen.com

VAVVAV Conveyor Components and solutionsfrom the Netherlands has spent a lot ofefforts in optimizing their conveyor chainsprogramm. More and more types of chains,both forged and plate steel chains andsuitable sprockets are kept on stock in ourwarehouses in the Netherlands andGermany.We established various initiatives aiming

at a continuous improvement of the livetimeof our conveyor chains. Different base

materials and high qualitive heat treatmentprocesses makes VAV conveyor chainsstronger, and therefore a good investmentto the future.Plastic flights, welded scraper, stainless

steel pins, everything can be fixed custommade in our workshops to ensure thequickest possible delivery times.Besides chains VAV offers elevator

components such as elevator belting andbuckets directly ex stock

VibrafloorVibrafloor is the world leader in providingmodular vibrating bulk reclaim systems toreclaim cohesive and free flowing products,such as Soya Bean Meal, Potash, Wood-pellets, Sugar, Biomass and Grain.Installations include steel and concrete

silos, hoppers, warehouses, railcars andships.No other reclaim technology can provide

the same balance of advantages whichinclude:- Total silo clearance- No routine maintenance- Modular redundancy- Low energy consumption- High reclaim rates- No damaging vibration or stress transfer- No product degradation

VYNCKE NVVYNCKE designs and builds green andclean energy plants burning biomass andSolid Recovered Fuel (SRF) to producethermal energy from 1 – 100 MWth andelectrical power from 0.5 – 15 MWe. The energy comes individually or in any

combination of steam, hot water, thermaloil and hot gas … with or without electricalpower generation.

WATT Global MediaVisit the WATT Global Media exhibit atbooth no. B179 to pick up recent issues ofFeed International, Petfood Industry, PoultryInternational and Pig Internationalmagazines, learn about Petfood Forumevents and meet Editors. We’ll help you stay ahead of the

competition with the data and informationyou need to grow your business.

Winovazyme Biotech Co, LtdWinovazyme is specialized on the R & D ofenzyme, we have the researcher teamcomposed by 32 highly educatedresearchers, including 1 PhD guider, 8 PhD,15 masters degree. We are holding manyinventions and 47 patents and running thebiggest fermentation center in China, withnine 75m3 tank and total fermentationvolume is 675m3. We are high quality and cost-effective

enzyme preparations – green breedingproducts manufacturer and supplier.

exhibitor previews

39Showtime

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 39

With advanced technology and richexperience, we are focus on providingcustomers with customized solution ofMagnetic separators in food industry. In theprocess of entire service, top quality andcontinuous improvement are our perpetualcommitment to customers We are happy to share with you our

experience.

SymagaSymaga is a Spanish company specializingin the design, manufacture and supply ofsteel silos for storing seeds, cereals, malts,oilseeds, grains and pellets, and rice for theagriculture, agro-industry, biofuels andbiomass industries. The company has more than 30 years of

experience and over 15 million m³ ofstorage space worldwide, ensuring thecapacity to tackle any project.Symaga supplies a wide range of silos, flat

bottom up to 25,000 cubic meters, andhopper silos reaching 12 meters in diameterwith 45-degree hopper and 2,649 cubicmeters capacity, completely galvanized andthe double welded compression ring.Symaga provides Z600 gr/m² galvanization,and continues to invest in research anddevelopment, allowing it to develop newproducts such as ventilated cones and fullyperforated floors, to meet customer needs.

SynbioTech IncorporationSynbioTech Incorporation, founded in 2000,has devoted to research and manufactureof probiotics for animal health and humanbeings. With our core competencySYNTEK® thorough, we designed the highviable probiotic solution, SYNLAC®

products, for poultry, livestock, andaquaculture to replace antibiotics in orderto the aim of sustainable development.

Top Silo Constructions Top Silo Constructions is a silo supplier andhas been focusing on the design andconstruction of rectangular steel siloinstallations. As a square silo manufacturerTSC has completed numerous projectsaround the world. These product prove ourknowledge in the area of bulk and solidsstorage, day in day out.The flexible modular square silo system is

always customized for your storagedemands. Typically, our silos have thefollowing capacities:- Total silo block from 30 – 30.000m3

(or more)- Individual bin from 5 – 500 m3

- Total number of bins in a silo block from 2 – 200 (or more)

TORNUM ABTORNUM manufactures all ranges ofdryers, from batch dryers to BIG dryers witha capacity of 300 tons per hour.

TORNUM IDC, Intelligent Dryer Control, isa unique concept offering precise controlthroughout the drying process. In the heatrecovery dryers the energy consumption isreduced by up to 30%.

Tyson Foods, Inc. Animal NutritionGroupFrom our earliest years as a company, ourfounder John W. Tyson, made chicken feedto ensure the quality and quantity heneeded for a growing business. Soon,Tyson’s Feed and Hatchery was a trustedname in the business. And every bag offeed proudly proclaimed: There is nosubstitute for quality.We believe that statement is as true today

as it was then.Our offerings include 100 percent chicken-

based products: Chicken Meal, Chicken ByProduct Meal, Chicken Fats, Wet PetIngredients, Nutraceuticals and SpecialtyProtein Blends.

Van AarsenVan Aarsen is developer, manufacturer andsupplier of state of the art machines andcomplete feed mill solutions for theproduction of compound feed andpremixes. The better the animal feed, the better the

food on the table! It’s as simple as that. Wetake our crucial role in the ‘agro-feed’ chainseriously, helping you to achieve optimalsolutions. Our innovative machines and complete

feed mill solutions are designed andconstructed to increase production andlower operational costs; with minimumenergy consumption and maximum benefitto feed safety and ease of operation. Since 1949. Worldwide.Feedmills of the future are here today.

What does the future hold for feed milltechnology? The future is more efficiency,while increasing feed quality. The future ishigher production and lower energyconsumption. The future is fully automatedlines producing lower costs per ton. Thefuture is smart engineering concepts usingstate-of-the-art technology. The future is here today, with smart feed

mills from Van Aarsen. [email protected], www.aarsen.com

VAVVAV Conveyor Components and solutionsfrom the Netherlands has spent a lot ofefforts in optimizing their conveyor chainsprogramm. More and more types of chains,both forged and plate steel chains andsuitable sprockets are kept on stock in ourwarehouses in the Netherlands andGermany.We established various initiatives aiming

at a continuous improvement of the livetimeof our conveyor chains. Different base

materials and high qualitive heat treatmentprocesses makes VAV conveyor chainsstronger, and therefore a good investmentto the future.Plastic flights, welded scraper, stainless

steel pins, everything can be fixed custommade in our workshops to ensure thequickest possible delivery times.Besides chains VAV offers elevator

components such as elevator belting andbuckets directly ex stock

VibrafloorVibrafloor is the world leader in providingmodular vibrating bulk reclaim systems toreclaim cohesive and free flowing products,such as Soya Bean Meal, Potash, Wood-pellets, Sugar, Biomass and Grain.Installations include steel and concrete

silos, hoppers, warehouses, railcars andships.No other reclaim technology can provide

the same balance of advantages whichinclude:- Total silo clearance- No routine maintenance- Modular redundancy- Low energy consumption- High reclaim rates- No damaging vibration or stress transfer- No product degradation

VYNCKE NVVYNCKE designs and builds green andclean energy plants burning biomass andSolid Recovered Fuel (SRF) to producethermal energy from 1 – 100 MWth andelectrical power from 0.5 – 15 MWe. The energy comes individually or in any

combination of steam, hot water, thermaloil and hot gas … with or without electricalpower generation.

WATT Global MediaVisit the WATT Global Media exhibit atbooth no. B179 to pick up recent issues ofFeed International, Petfood Industry, PoultryInternational and Pig Internationalmagazines, learn about Petfood Forumevents and meet Editors. We’ll help you stay ahead of the

competition with the data and informationyou need to grow your business.

Winovazyme Biotech Co, LtdWinovazyme is specialized on the R & D ofenzyme, we have the researcher teamcomposed by 32 highly educatedresearchers, including 1 PhD guider, 8 PhD,15 masters degree. We are holding manyinventions and 47 patents and running thebiggest fermentation center in China, withnine 75m3 tank and total fermentationvolume is 675m3. We are high quality and cost-effective

enzyme preparations – green breedingproducts manufacturer and supplier.

exhibitor previews

39Showtime

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 39

Page 40: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 40

Page 41: Showtime 21-1

Our enzymes have been exported toCanada, Australia, New Zealand, Russia,Brazil, Argentina, Peru, India, Pakistan,Philippine, Turkey, Korea, and othercountries.

Wuxi Naite ElectromechanicalTechnology Co, LtdWuxi Naite Electromechanical IntegratingTechnology Co, Ltd, founded in June 1994,is a high-tech enterprise and softwarecompany for full range of weighing andpackaging production line solutions, andR & D, production, sales and services onautomatic quantitative packaging andbatching equipmens. Visit our booth no. B153. During the

whole exhibition we will display the fullautomatic packing machine which is widelyused in CP Group of China branches. For more information contact:

[email protected]

Yemtar Feed Mill MachineryYemtar has been established at 1980 fordesigning, manufacturing and installingturnkey feed mills. We are market leader inTurkish market and we have lots ofreference projects in international markets. Our premises are located at Bandirma/

Turkey and we manufacture our products at12.000 m2 closed area and 33.000 m2 totalarea. We have approximately 200 people inproduction team, 35 people in managementteam and 75 people in installation team.

Yenar A.S.We have been maintaining our experienceof more than 20 years in the sector in our

modern production plant established ontotal 40.000 m2 area, of which 18.000 m2

is covered. We have been one of theimportant companies of Turkey and theworld since 1995 with our equipment rangehaving the highest technologymanufacturing rolls which are the need ofmany food and feed sectors by means ofdouble pour centrifugal casting method.Manufacturing annually 22.000 units of rollsof various diameters and length.Yenar is among leaders of the world due

to service after sales and high qualityproduction.

Zhanjiang Hengrun Machinery Co, LtdZhanjiang Hengrun Machinery Co. Ltd wasfounded in April 2006. It is the onlyenterprise that specialized in processingfeeds and machinery equipment ofagriculture and animal husbandry inGuangdong Zhanjiang, which is developingvery fast in recent years, annual turnoveramounts to 30 million Yuan. In 2009, our company has passed ISO

international quality system which awardedby Switzerland SGS company, theinternational famous identified company.Hengrun machinery has maintained co-operation with a number of internationalpartners in various ways, cultivated lots ofprofessionals and developed a variety ofgrain & feed machinery products withsuperior performance.

Zhenjiang Jingwei ConveyingTechnology Co, LtdZhenjiang Jingwei Conveying Technology

Co, Ltd specializes in manufacturing,research and development of componentsfor bucket elevator and conveyor. Wehave 28,000 square meters manufacturingfacility.Our main products include elevator

bucket, drag conveyor flight, UHMW-PEsheet, PVC elevator belts, elevator bolts,belt fastener, conveyor chains and morethan four hundred types componentswhich are widely used in bulk materialhandling and storage industry.We supply parts to many famous groups,

have the ability to provide high qualityproducts with competitive price and bestservice to customers.

Zhenjiang New HengtongConveying Equipment Co, LtdZhenjiang New Hengtong ConveyingEquipment Co, Ltd (B027) specializes inresearching, exploiting and manufacturinggranular material handling components,grain processing machinery componentsand engineering plastics. We have passedISO9001:2000 international quality systemcertification. Our company manufacture more than 20

types of products such as ElevatorBuckets, Elevator Belts, Elevator Bolts,Drag Conveyor Chains, Drag ConveyorFlights, Gear Wheels, Screw Flights, SieveCleaners etc.Our products are best seller all over China

and have sold to Asia, America, Europeand Africa.If you need more details, please visit web

www.zjxhtss.com and send email [email protected].

exhibitor previews

41Showtime

For full list of exhibitors at the event please visit our online catalogue at www.victam.com/?i=353

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 41

Our enzymes have been exported toCanada, Australia, New Zealand, Russia,Brazil, Argentina, Peru, India, Pakistan,Philippine, Turkey, Korea, and othercountries.

Wuxi Naite ElectromechanicalTechnology Co, LtdWuxi Naite Electromechanical IntegratingTechnology Co, Ltd, founded in June 1994,is a high-tech enterprise and softwarecompany for full range of weighing andpackaging production line solutions, andR & D, production, sales and services onautomatic quantitative packaging andbatching equipmens. Visit our booth no. B153. During the

whole exhibition we will display the fullautomatic packing machine which is widelyused in CP Group of China branches. For more information contact:

[email protected]

Yemtar Feed Mill MachineryYemtar has been established at 1980 fordesigning, manufacturing and installingturnkey feed mills. We are market leader inTurkish market and we have lots ofreference projects in international markets. Our premises are located at Bandirma/

Turkey and we manufacture our products at12.000 m2 closed area and 33.000 m2 totalarea. We have approximately 200 people inproduction team, 35 people in managementteam and 75 people in installation team.

Yenar A.S.We have been maintaining our experienceof more than 20 years in the sector in our

modern production plant established ontotal 40.000 m2 area, of which 18.000 m2

is covered. We have been one of theimportant companies of Turkey and theworld since 1995 with our equipment rangehaving the highest technologymanufacturing rolls which are the need ofmany food and feed sectors by means ofdouble pour centrifugal casting method.Manufacturing annually 22.000 units of rollsof various diameters and length.Yenar is among leaders of the world due

to service after sales and high qualityproduction.

Zhanjiang Hengrun Machinery Co, LtdZhanjiang Hengrun Machinery Co. Ltd wasfounded in April 2006. It is the onlyenterprise that specialized in processingfeeds and machinery equipment ofagriculture and animal husbandry inGuangdong Zhanjiang, which is developingvery fast in recent years, annual turnoveramounts to 30 million Yuan. In 2009, our company has passed ISO

international quality system which awardedby Switzerland SGS company, theinternational famous identified company.Hengrun machinery has maintained co-operation with a number of internationalpartners in various ways, cultivated lots ofprofessionals and developed a variety ofgrain & feed machinery products withsuperior performance.

Zhenjiang Jingwei ConveyingTechnology Co, LtdZhenjiang Jingwei Conveying Technology

Co, Ltd specializes in manufacturing,research and development of componentsfor bucket elevator and conveyor. Wehave 28,000 square meters manufacturingfacility.Our main products include elevator

bucket, drag conveyor flight, UHMW-PEsheet, PVC elevator belts, elevator bolts,belt fastener, conveyor chains and morethan four hundred types componentswhich are widely used in bulk materialhandling and storage industry.We supply parts to many famous groups,

have the ability to provide high qualityproducts with competitive price and bestservice to customers.

Zhenjiang New HengtongConveying Equipment Co, LtdZhenjiang New Hengtong ConveyingEquipment Co, Ltd (B027) specializes inresearching, exploiting and manufacturinggranular material handling components,grain processing machinery componentsand engineering plastics. We have passedISO9001:2000 international quality systemcertification. Our company manufacture more than 20

types of products such as ElevatorBuckets, Elevator Belts, Elevator Bolts,Drag Conveyor Chains, Drag ConveyorFlights, Gear Wheels, Screw Flights, SieveCleaners etc.Our products are best seller all over China

and have sold to Asia, America, Europeand Africa.If you need more details, please visit web

www.zjxhtss.com and send email [email protected].

exhibitor previews

41Showtime

For full list of exhibitors at the event please visit our online catalogue at www.victam.com/?i=353

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 41

Page 42: Showtime 21-1

Contact information

See us on Twitter, Facebook, LinkedIn and Google+

Scan the QR codes below for more information

Head officeVictam International BVP.O. Box 197, 3860 AD Nijkerk, The Netherlands.T: +31 33 246 4404 F: +31 33 246 4706E: [email protected]

UK office21 Fairlawn Drive, Redhill RH1 6JP,England.T: +44 (0)1737 763501 E: [email protected]

ConsultantsPlease visit our websites for information onindustry consultants in your area.www.fiaap.com www.victam.comwww.grapas.eu

Exhibition opening hours

Tuesday 29 March 10.00 – 18.00

Wednesday 30 March 10.00 – 18.00

Thursday 31 March 10.00 – 16.00

Please note visitor registration closes at 14.00 on Thursday 31 March

Free visitor entranceTo obtain your free exhibition visitorentrance badge visit www.fiaap.com orwww.victam.com or www.grapas.euand select ‘Visitor registration’. Completethe simple form and we will send you, byreturn email, a visitor confirmation. This confirmation must be brought to

the show and exchanged at the VisitorPre-Registration desks for your freeentrance badge. The badge is valid forall three days of the event and for eachof the exhibitions.To avoid disappointment arrange for

visas early.

contact details

© Copyright 2016, Victam International BV. All rights reserved

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 42

Page 43: Showtime 21-1

The region’s only dedicated show for thesupply, use and formulation of ingredients,

nutrition and additives for animal feeds,dry petfood and aquafeed

Asia’s largest event for the production and processing of animal feeds, dry petfood,

and aquafeed. Also including biomasspelleting technology

The show for rice and flour milling, grainprocessing, industrial pasta and noodle

processing, extruded snacks and breakfastcereal production

Asia’s largest feed and grain event

2 9 – 3 1 M A R C H 2 0 1 6 . B I T E C E X H I B I T I O N H A L L S , B A N G K O K , T H A I L A N D

��� What’s on show at FIAAP Asia 2016?• Ingredients • Additives • Formulation • Laboratory equipment • Quality control

��� What’s on show at VICTAM Asia 2016?• Feed production technology • Packaging • Energy efficiency • Auxiliary equipment • Biomass pelleting technology

��� What’s on show at GRAPAS Asia 2016?• Rice milling and sorting technology • Flour milling technology• Flakers, extruders • Grain processing systems • Additives

��� ConferencesEach of the exhibitions will have their own conferences, including:• The FIAAP Asia Animal Nutrition Conference 2016 • Petfood ForumAsia 2016 • Aquafeed Horizons Asia 2016 • Global Milling Conferencewith GRAPAS Asia 2016 • Biomass and Biomass Pelleting 2016 • The second ASEAN Feed and Rice Symposium • The second ASEANFeed Summit

��� Supported by• Thai Ministry of Agriculture & Co-Operatives • Thai Department ofLivestock Development • Thai Department of Fisheries • Thai Feed MillAssociation • Thai Rice Milling Association • Thai Chamber of Commerce• Federation of ASEAN Feed Associations • Thailand Convention & Exhibition Bureau

��� Organized byVictam International BV, PO Box 197, 3860 AD Nijkerk, The NetherlandsT: +31 (0)33 246 4404 F: +31 (0)33 246 4706 E: [email protected] www.victam.com www.grapas.euSee us on Twitter, Facebook, LinkedIn and Google+ or scan the QR codes

Your global marketplace – an international event in an international city being held in a country with large home markets

��� Free on-line registrationFree on-line visitor registration is available from 1st November 2015 at:www.victam.com

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 43

Page 44: Showtime 21-1

Showtime.Spring16web:Newsletter 7/1/16 14:12 Page 44