Copyright © 2016 Korean Neurotraumatology Society 163

Introduction

Since the development of various shunt systems, shunt operation has been regarded as one of the foremost surgi-cal treatment modality for patients with symptomatic hy-drocephalus. The Codman-Hakim programmable valve (Codman, Johnson & Johnson, Raynham, MA, USA) was developed by Drs. Salomon and Hakim during the late 1980s, and it has been one of most popular shunt systems used in the clinical practice for the treatment of hydroceph-alus.7) It allows for a precise control of the cerebrospinal fluid (CSF) drainage by noninvasive adjustments using mag-

netic impulses into one of 18 different pressure settings with-in a range of 30 to 200 mmH2O.2,3,6,7)

Similar to other shunt systems, this system consists of three parts: a ventricular catheter, a valve, and a distal catheter. The valve has a unique and delicate feature. The stainless steel flat spring has two ends. The proximal end presses the synthetic ruby valve ball landed on a matching valve seat through which CSF is passed distally. The other end is sup-ported by the spiral staircase cam (pressure control cam) which controls the intensity of the flat spring (Figure 1A). The bottom side of the cam has a protrusion of “X” in the center and this part is fixed to a corresponding X-shaped slit on the titanium base plate by the pressure of the flat spring (Figure 1B).6)

Even with these precise and exquisite microtechnics of this system, malfunctions have been also reported which lead to underdrainage or overdrainage of the CSF.2,4,6) Ac-cording to these reports, obstruction of the ventricular cath-eter by tissue materials or hematoma and catheter discon-nections are relatively common, while the malfunction of the valve itself is rare.2) A direct trauma or an exposure to magnetic fields may cause a mechanical malfunction of the

Shunt Overdrainage Caused by Displacement of the Pressure Control Cam after Pressure Adjustment

Su-Ho Kim, MD, Yoon-Soo Lee, MD, Min-Seok Lee, MD, Sang-Jun Suh, MD, Jeong-Ho Lee, MD, and Dong-Gee Kang, MDDepartment of Neurosurgery, Daegu Fatima Hospital, Daegu, Korea

Although the Codman-Hakim programmable valve is one of most popular shunt systems used in the clinical practice for the treatment of hydrocephalus, malfunctions related with this system have been also reported which lead to underdrain-age or overdrainage of the cerebrospinal fluid. While obstruction of the ventricular catheter by tissue materials or hemato-ma and catheter disconnection are relatively common, the malfunction of the valve itself is rare. Herein, we report on a rare case of shunt overdrainage caused by displacement of the pressure control cam after pressure adjustment. A 57-year-old female, who underwent a ventriculoperitoneal shunt eight years ago, experienced aggravating symptoms of shunt overdrainage after pressure adjustment. Displacement of the pressure control cam was revealed on the X-ray, and a shunt revision was performed. The purpose of this report is to provide a working knowledge of the valve structure and to en-hance the ability to interpret the valve setting on an X-ray for diagnosis of valve malfunction. (Korean J Neurotrauma 2016;12(2):163-166)

KEY WORDS: Cerebrospinal fluid shunts ㆍEquipment failure ㆍHydrocephalus ㆍVentriculoperitoneal shunt.

Received: August 9, 2016 / Revised: September 18, 2016Accepted: October 5, 2016Address for correspondence: Yoon-Soo LeeDepartment of Neurosurgery, Daegu Fatima Hospital, 99 Ayang-ro, Dong-gu, Daegu 41199, KoreaTel: +82-53-940-7330, Fax: +82-53-954-7417E-mail: paulyoonsoolee@hanmail.net cc This is an Open Access article distributed under the terms of Cre-ative Attributions Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0/) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

CASE REPORTKorean J Neurotrauma 2016;12(2):163-166

pISSN 2234-8999 / eISSN 2288-2243

https://doi.org/10.13004/kjnt.2016.12.2.163

164 Korean J Neurotrauma 2016;12(2):163-166

Shunt Overdrainage Caused by Displacement of Pressure Control Cam

programmable valve.4-6) Herein, we report on a rare case of shunt overdrainage caused by displacement of the pressure control cam after pressure adjustment.

Case Report

Eight years ago, a 57-year-old female underwent a ven-triculoperitoneal shunt operation with a Codman-Hakim programmable valve for hydrocephalus after subarachnoid hemorrhage. Her symptoms of hydrocephalus had been improving since the operation, but she complained of slow-ly aggravating headache and nausea for recent years. Her brain computed tomography (CT) showed a slit-ventricle (Figure 2A), and the skull X-ray revealed the valve pressure at 10 mmH2O. The valve pressure was adjusted to 12 mm-H2O at the outpatient department. A few days later, she pre-sented with even worsening headache and nausea. She had

no history of direct trauma on the valve or an exposure to magnetic fields. The skull X-ray showed that the pressure control cam was detached from the base plate and displaced distally (Figure 3). She underwent revision of the shunt system to exchange the valve. A microscopic inspection of the valve revealed the detachment of the cam from the base plate leaving the X-shaped slit empty (Figure 4). The dis-placement of the cam relaxed the flat spring pressure on the valve ball, and it led to overdrainge of the CSF. After the shunt revision, her symptoms dramatically resolved and her brain CT showed recovery from the slit-ventricle (Figure 2B).

A BFIGURE 1. (A) Illustration depicts the structure of the Codman-Hakim programmable valve from the side view. The flat spring (white arrowheads) presses the valve ball landed on a matching valve seat (black arrowheads) through which cerebrospinal fluid (CSF) is passed distally as well as the pressure control cam (short black arrow) which controls the intensity of the flat spring. These struc-tures are built on the base plate (short white arrows). Long white arrows indicate the direction of CSF flow. (B) Illustration depicts the valve from the top view. The bottom side of the cam has a protrusion of “X” (white asterisk) in the center and this part is fixed to a corresponding X-shaped slit on the base plate by the pressure of the flat spring.

FIGURE 2. (A) A brain computed tomography (CT) before shunt revision shows a slit-ventricle. (B) A brain CT after shunt revision shows recovery from the slit-ventricle.

A B

FIGURE 3. (A) A skull X-ray shows that the pressure control cam (black arrow) is detached from the base plate and dis-placed distally. Note the empty X-shaped slit (white arrow) on the base plate. (B) Another skull X-ray of a normal valve with pressure setting at 10 mmH2O is also provided for comparison. Note the correct location of the cam (black arrow) on the X-ray.

A B

Su-Ho Kim, et al.

http://www.kjnt.org 165

Discussion

Patients undergone shunt operation have a narrow ther-apeutic window between overdrainage and underdrain-age.3) Since the required amount of the CSF drainage in-consistently varies depending on patients’ condition, life style, and status of physical activity, more than half of these pa-tients require postoperative adjustments of valve pressure to maintain an ideal shunt function.1,7)

Because the Codman-Hakim programmable valve allows noninvasive fine tuning of the valve pressure using mag-netic impulses and gives clinicians a broad choice of pres-sure settings within a range of 30 to 200 mmH2O, this de-vice has been used popularly in the clinical practice for the treatment of hydrocephalus.2,3,6,7)

This valve is composed of complex systems, and each component has a delicate function. The flat spring presses the valve ball as well as the pressure control cam on the base plate, and the set of these complex parts controls the drain-age of the CSF in an appropriate pressure.6) Unintended or accidental alterations in any of these components may cause valve malfunction. In order to recognize the presence of valve malfunction, clinicians require a working knowledge of the valve structure and an ability to interpret the valve setting on an X-ray.3)

Okazaki et al.4) reported a case of shunt malfunction re-sulting from a direct trauma to the valve. A crack was found at the top of valve housing, and the cam was detached from the base plate. According to the product manual and other reports, it is mentioned that the use of magnetic resonance (MR) systems up to 3 Tesla will not damage the valve itself but may change the setting of the valve, and it is recommend-ed to confirm the valve setting after an MR procedure.5,6) However, Watanabe et al.6) reported a rare case of shunt mal-

function caused by detachment of the cam after 3 Tesla MR imaging (MRI). Therefore, a direct trauma to the valve or an exposure to strong magnetic fields may cause a mechanical malfunction of the programmable valve.

In the present study, the patient had no definite history of head trauma or MRI. Skull X-ray taken prior to the valve ad-justment was unremarkable. Since pressure adjustment normally does not lead to the cam displacement, we assume that there has been a minor problem with durability of the valve causing a reduction of the flat spring pressure dur-ing the eight years of postoperative periods and a magnet-ic impulse to adjust the valve pressure finally attributed to the detachment of the cam leading to overdrainge of the CSF.

Conclusion

Although the Codman-Hakim programmable valve is generally very useful in terms of noninvasive pressure ad-justment and fine tuning of valve pressure, a rare compli-cation such as displacement of the pressure control cam may occur. An accurate knowledge on the valve structure as well as an ability to interpret the valve status on an X-ray are essential to confirm maintenance of this elaborate device and recognize the presence of valve malfunction.

■ The authors have no financial conflicts of interest.

REFERENCES1) Black PM, Hakim R, Bailey NO. The use of the Codman-Medos

Programmable Hakim valve in the management of patients with hydrocephalus: illustrative cases. Neurosurgery 34:1110-1113, 1994

2) Kurosaki K, Hamada H, Hayashi N, Kurimoto M, Hirashima Y, Endo S. A rare case of shunt malfunction attributable to blockage of a Codman-Hakim programmable shunt valve. Childs Nerv Syst

A B C DFIGURE 4. Intraoperative photographs reveal the detachment of the cam (black arrow) from the base plate leaving the X-shaped slit (white arrow) on the base plate empty. (A) Top view. (B) Bottom view. Magnified photographs of a normal valve are also provid-ed for comparison. (C) Top view. (D) Bottom view. Note the correct location of the cam (black arrow) on the base plate. The protru-sion of “X” is properly landed on the X-shaped slit (white arrow).

166 Korean J Neurotrauma 2016;12(2):163-166

Shunt Overdrainage Caused by Displacement of Pressure Control Cam

18:183-185, 20023) Lollis SS, Mamourian AC, Vaccaro TJ, Duhaime AC. Program-

mable CSF shunt valves: radiographic identification and interpre-tation. AJNR Am J Neuroradiol 31:1343-1346, 2010

4) Okazaki T, Oki S, Migita K, Kurisu K. A rare case of shunt mal-function attributable to a broken Codman-Hakim programmable shunt valve after a blow to the head. Pediatr Neurosurg 41:241-243, 2005

5) Shellock FG, Wilson SF, Mauge CP. Magnetically programmable

shunt valve: MRI at 3-Tesla. Magn Reson Imaging 25:1116-1121, 2007

6) Watanabe A, Seguchi T, Hongo K. Overdrainage of cerebrospinal fluid caused by detachment of the pressure control cam in a pro-grammable valve after 3-tesla magnetic resonance imaging. J Neurosurg 112:425-427, 2010

7) Yamashita N, Kamiya K, Yamada K. Experience with a program-mable valve shunt system. J Neurosurg 91:26-31, 1999