si direct
TRANSCRIPT
SIDIRECT Driver > SIDIRECT Driver > Simatic S5 via Serial Direct
SIDIRECT Driver > Simatic S5 via Serial Direct
The serial direct method of communication to Siemens Simatic S5 - 90U, 95U, 100U, 102U,
115U, 135U and 155U PLCs, uses the SIDIRECT driver. Using this method you can connect
to single or multiple PLCs, directly through the programming ports, as in the following
diagram:
You can acquire a programming cable from your Simatic S5 distributor.
This protocol does not support the following CPUs:
� CPU945 for the S5-115 range
� CPU928, CPU946, CPU947, and CPU948 for the S5-135/155 range
Page 1 of 1SIDIRECT Driver > Simatic S5 via Serial Direct
5/2/2013mk:@MSITStore:C:\Program%20Files\Schneider%20Electric\Vijeo%20Citect%207.20\...