siemens training brochure
DESCRIPTION
SiemensTRANSCRIPT
-
Training for Automation & Industrial Solutions
www.siemens.com.sg/ad
Revision 31.10.2007
-
Sit
ra
in S
ing
ap
or
e
2
About sitrain
Under the name sitrain, Siemens
Automation and Drives (A&D) has es-
tablished a comprehensive range of
training courses in more than
60 countries to greatly support you
towards solving your tasks.
With sitrain, you will learn to effec-
tively apply automation products, and
to optimally adapt your system com-
ponents.
All in all, this provides you with enor-
mous benefits: shortened start-up
times, reduced down-times, and
faster troubleshooting. Thanks to the
competence you have acquired!
sitrain Singapore
Siemens Automation and Drives is
committed to provide quality and ex-
cellence to the worldwide automa-
tion industry. Answering the needs of
the local market, the Training Center
in Singapore was established on
1 January 1997. With assistance from
the parent training center in Nurem-
berg, Germany, sitrain Singapore
offers training programs with a wide
range of industrial automation
courses.
The Center has a dedicated team of
training consultants and professional
instructors, and a large investment in
hands-on equipment. This insures
quality results for your training in-
vestment.
State-of-the-art training sets are the key to excellent training. A trainee/trainer ratio of 2 to 1 ensures a maximum involvement of each participant.
-
Sit
ra
in S
ing
ap
or
e
3
Our scheduled courses
Understanding the needs of our cus-
tomers, all our training courses are
short and concise. We provide train-
ing for users of our S7 family as well
as for a wider range of A&D products
up to certified courses like RFID,
Profibus, etc.
For S7, SIMATIC STEP-by-STEP (ST-
Step) is the starting point for STEP7
learning, and it forms the pre-
requisite for most of our advanced
topic courses. Upon the successful of
this course, you can move on to any
of our courses that suit your needs
most. For example, we have courses
catering to specific needs such as Cer-
tified Profibus, SIMATIC Redundancy,
SIMATIC WinCC, etc.
Being a portable language within our
SIMATIC range, learning S7 allows
you to work with both our S7-300
and S7-400 ranges of PLCs.
The Center offers also a WinCC sys-
tem course, for users of our SCADA
solution and WinCC Flexible course
for users of our HMI Panels (Touch
Panel/Operator Panel). The Training
Center in Singapore is also the Re-
gional Training Partner for SIMATIC
PCS7, Siemens advanced process
control systems. PCS7 courses are
scheduled regularly in our Training
Center.
Learning in the sitrain environment
will bring you together with candi-
dates coming from different back-
grounds and different industries with
different job scope, it is interesting to
know that this actually improves the
learning process. Candidates are able
to think out of the box, and take
home with them working ideas which
have been employed successfully in
other areas.
On-demand courses
and custom-tailored
training
For courses not listed in our schedule,
these will be available on-demand,
subjected to a minimum class size.
The number of participants in our
SIMATIC training is limited to 8. Our
trainers can deal intensively with
questions and desires of the
-
Sit
ra
in S
ing
ap
or
e
4
individual participant. In each case
two participants work together on an
equipment place during the training
courses. This is developed in line with
standard usage and consists of a pro-
gramming device, automation equip-
ment and a plant model. Optimal
training success is guaranteed by the
small number of participants and the
practical use of equipment. We un-
derstand the work nature and envi-
ronment of our customers.
The Center offers also custom-
tailored training, and these can be
conducted either at Siemens Center
or on-site, to suit your exact needs.
You have the possibility of specifying
emphasis and topic areas according
to your needs.
Experienced Trainers
Our trainers come directly from the
real world and have didactic experi-
ence. Being practise-orientated this
makes it possible to effectively impart
the theoretical knowledge. And since
all theory is known to be grey, the
practical exercises occupy up to half
of our course time. In everyday work-
ing life, you can immediately apply
what you have learnt.
We train you on state-of-the-art, di-
dactically designed training units. On
them, you can train to your heart's
desire, until you feel absolutely confi-
dent. At the end of every course we
confirm which knowledge and which
capabilities you have acquired in an
official certificate, recognized world-
wide.
Registration
Please contact us via phone or email
to check on the vacancy status for
your chosen courses. Do give us a call
before faxing in your registration.
This will ensure prompt process of
your application. The registration
form can be found on the last page of
this brochure or on our website.
For overseas trainees, the Center can
assist in the arrangement of accom-
modation and transportation. Please
contact us for more information.
-
Sit
ra
in S
ing
ap
or
e
5
Detailed training
course documents
Every participant receives special
training course documents, which
offer after the course a valuable as-
sistance with the daily work.
Constant quality
control
In our training every participant has
the possibility of communications to
our trainers. Your openly and hon-
estly opinion on our trainers is very
important. We strive to consider your
improvement suggestions with the
organization of the following meet-
ings.
-
Sit
ra
in S
ing
ap
or
e
6
SIMATIC PLC (Programmable Logic
Controller)
SIMATIC HMI (Human Machine Interface)
SIMATIC NET (Networking)
SIMATIC PCS7 (DCS System)
Training Courses
Drives/ Motion Control SINUMERIK CNC
RFID (Radio Frequency
Identification) Motor Protection & Control
-
Sit
ra
in S
ing
ap
or
e
7
Training Program Overview
SIMATIC PLC (Programmable Logic Controller)
SIMATIC S7 Step-by-Step ST-STEP 3 1,200
SIMATIC S7 Programming 2 ST-STEP2 5 2,000
SIMATIC S7 Redundancy System ST-RED 3 1,500
SIMATIC S5 ST-S5 5 2,000
SIMATIC TI505 Maintenance and Programming ST-TI505 3 1,500
SIMATIC S7-200 ST-S7200 1 600
Course Name Course Code Days Price (SGD)
SIMATIC HMI (Human Machine Interface)
RFID (Radio Frequency Identification)
Drives | Motion Control
SIMATIC PCS7 (DCS System)
Motor Protection & Control
SIMATIC HMI Panels / WinCC Flexible ST-WCCFL 2 900
SIMATIC WinCC ST-WCCSYS 3 1,200
Certified CompTIA RFID + Certification ST-RFID4U 4 3,500
Micromaster MM4 Drive SD-MM4 2 900
MASTER DRIVES Service and Commissioning SD-MD 4 1,900
SINAMICS S120 Service and Commissioning MC-S120 5 4,200
SIMATIC S7 Communications ST-COMM 3 1,500
Certified Profibus Installer (CPI) PROF-CPI 1 1,200
Certified Profibus DP Engineer (CPE) PROF-CPE 3,5 3,500
Certified Profibus PA Module (CPA) PROF-CPA 1,5 900
Profibus Maintenance & Troubleshooting PROF-MT 2 1,800
SIMATIC PCS7 System Engineering ST-PCS7BAS 5 2,500
SIMATIC PCS7 Batch ST-PCS7BTH 5 4,200
SIMATIC PCS7 Process Safety ST-PCS7PS 3 2,800
SIMOCODE pro Engineering and Commissioning ST-SIMO 2 900
SINUMERIK 840D/810D Start up and Service NC-SINU 5 2,500
SINUMERIK 840D/810D Programming (Milling) NC-SINU-M 5 2,500
SIMATIC NET (Networking)
SINUMERIC CNC
-
Sit
ra
in S
ing
ap
or
e
8
SIMATIC S7 Step-by-Step
SIMATIC S7 Redundancy System
SIMATIC S7 Programming 2
SIMATIC S5
SIMATIC TI505 Maintenance and
Programming
SIMATIC S7-200
Recommended Learning Path
SIMATIC PLC
-
Sit
ra
in S
ing
ap
or
e
9
Courses in Detail
Course Title SIMATIC STEP-by-STEP
Course Code ST-STEP
Course Duration 3 days
Requirements Background in Automation
Description This course gives participants a good foundation in SIMATIC STEP7 software environment and provides skills necessary to handle and maintain SIMATIC S7-300/400 PLC (Programmable Logic Controller).
This course also makes a great platform for those new to Sie-mens S7 automation systems and it forms the basis for further advanced topic courses.
Content
Overview of SIMATIC S7 family Navigating SIMATIC Manager Hardware Configuration Symbolic Addressing Block Architecture Binary and Digital Operation Introduction to Profibus-DP Manipulating Data Blocks Understanding FC, FB and OB Troubleshooting and Debugging Functions Basic Installation and Maintenance of PLC
Course Title SIMATIC S7 Programming 2
Course Code ST-STEP2
Course Duration 5 days
Requirements SIMATIC Step-by-Step (ST-STEP)
Description The course is directed at personnel engaged in project engi-neering tasks who would like to become familiar with the ex-tended programming possibilities of SIMATIC S7.
After the course, the participant will be able to structure and create advanced S7 programs, making it possible to efficiently work with STEP 7 and thus reduce the engineering phase.
The course uses a 'hands-on' practical approach to reinforce the theoretical aspects of the training.
-
Sit
ra
in S
ing
ap
or
e
10
Content Using structograms as a method for program design Functions, function blocks and multi-instances (with examples using IEC Timer/Counter) Jump commands and Accumulator operations Configuration of Breakpoints as a debugging tool Memory Indirect addressing Using Error organization blocks to evaluate PROFIBUS slave
downtime Error management with error organization blocks Analyzing synchronous errors with organization blocks Analyzing S7 diagnostic data Writing user messages in the Diagnostic Buffer Troubleshooting and error messages with an HMI device
Course Title SIMATIC Redundancy System
Course Code ST-RED
Course Duration 3 days
Requirements SIMATIC Step-by-Step (ST-STEP)
Description This course gives you a quick overview of Siemens fault-tolerant system (Redundancy system). You will learn in this course how to setup and operate S7-400H Hardware Redun-dancy system. A practically based course to equip personnel who already have knowledge of S7-300/400 with a sound understanding of S7 fault-tolerant system.
Content Understand different redundancy principle (HotStandby, WarmStandby)
Understand in details special features and synchronization principles of S7-400H system
Configure hardware components in runtime (H-CiR) Understand different configuration of remote I/O (Single-
channel, Redundant) Configure S7 fault-tolerant communication (H Communica-
tion) Troubleshoot a problem and identify the system component
that has failed
-
Sit
ra
in S
ing
ap
or
e
11
Course Title SIMATIC S5
Course Code ST-S5
Course Duration 5 days
Requirements Background in Automation
Description The course provides participants necessary skill to use SI-MATIC STEP5 software to program and to troubleshoot SI-MATIC S5 PLC system. The course is aimed at personnel in all areas, who would like to learn how to setup, operate and maintain SIMATIC S5 system.
Content Cyclic Program Execution Logic Operations Addressing and Process Images Latching Functions Counter and Comparator Functions Timer Functions Documentation Functions Restart and Performance Characteristic Data Blocks Functions Blocks Introductions to Troubleshooting Sequential Controls Time-Controlled Program Execution Analog Value Processing
Course Title SIMATIC TI505 Maintenance and Prgramming
Course Code ST-TI505
Course Duration 3 days
Requirements Background in Automation
Description This course is for both engineering and maintenance person-nel responsible for designing, commissioning, installing or maintaining the SIMATIC 505 family Programmable Logic Con-troller (PLC). This entry-level course covers the tasks necessary to support the design, modification, start-up and maintenance of a typi-cal SIMATIC 505 PLC system. Participants work with TISOFT software throughout the course. Hands-on lab exercises challenge participants to use the pro-gramming and diagnostic tools available in SIMATIC 505 sys-tems.
-
Sit
ra
in S
ing
ap
or
e
12
Content PLC Fundamental concepts and Terminology Hardware Overview Program Management Discrete Program Elements Word Program Elements Analog Program Elements Documentation PLC Diagnostics
Course Title SIMATIC S7-200
Course Code ST-S7200
Course Duration 1 day
Requirements General Computer Knowledge
Description This course begins with an introduction to the S7 product fam-ily followed by a detailed SIMATIC S7-200 system review. This discussion includes hardware and software components plus system configuration issues. The course then concentrates on the STEP 7 Micro/WIN software, program structuring and the instruction set. STEP 7 software tools and programming instruc-tions are introduced to guide the participants through the de-velopment of a realistic application.
The goal of this course is to help the participant to understand the powerful features of S7-200 and their application.
Content PLC Basics Overview of SIMATIC S7-200 Using STEP7-Micro/WIN Programming Software Creating S7-200 Project Using S7-200 Instruction Set Number Systems and Data Types Subroutines Introduction to S7-200 Special Features Program Documentation and Storage Debug and Test Tools
-
Sit
ra
in S
ing
ap
or
e
13
Course Title SIMATIC HMI Panels / WinCC Flexible
Course Code ST-WCCFL
Course Duration 2 days
Requirements General Computer Knowledge
Description This course provides a comprehensive review of the features and capabilities of Siemens WinCC Flexible software. Participants will perform a complete system configuration including project con-figuration, graphics design and system integration. Participants will also build skills with the user management tolls including se-curity, access, alarms and messaging. Throughout this course, lec-ture materials are complimented with hands-on exercises which built a working WinCC Flexible application.
Content Understand different HMI product portfolio Create HMI project using WinCC Flexible Compile and transfer a project Use basic features of WinCC Flexible (e.g. Data Logging, Alarm Logging, Recipes, Scripting, Reporting, Screen Navigation,
etc.) Create different user groups and user administration Create Multi-Lingual Project Create Faceplates Use advanced features of WinCC Flexible (e.g. Smart Access,
Smart Service, OPC, etc.) Integrate project into STEP7 environment
Courses in Detail
SIMATIC HMI
-
Sit
ra
in S
ing
ap
or
e
14
Course Title SIMATIC WinCC
Course Code ST-WCCSYS
Course Duration 3 days
Requirements General Computer Knowledge
Description A foundation course to provide participants with a sound undertaking of the concepts of Siemens WinCC SCADA soft-ware and the utilization of its facilities and features.
Participants will learn the correct development process in WinCC and throughout this course, lecture materials are complimented with hands-on exercises which build a work-ing WinCC application.
Content Create and manage WinCC projects Integrate components between WinCC and STEP7 Create WinCC tags with STEP7 symbol table Establish communications with a PLC Design a complex graphic Configure internal and external tags Define and Administer User Security Set and test WinCC Alarms and Messages Configure, archive and display Trends & Tables Configure, preview and print Reports
-
Sit
ra
in S
ing
ap
or
e
15
SIMATIC S7 Step-by-Step (SIMATIC PLC)
SIMATIC S7 Communications
Certified Profibus Installer (CPI)
Certified Profibus DP Engineer (CPE)
Certified Profibus PA Module (CPA)
Profibus Maintenance & Troubleshooting
Recommended Learning Path
SIMATIC NET
-
Sit
ra
in S
ing
ap
or
e
16
Course Title SIMATIC S7 Communications
Course Code ST-COMM
Course Duration 3 days
Requirements SIMATIC Step-by-Step (ST-STEP)
Description A foundation course to provide participants a sound understand-ing of networking and communication concept in SIMATIC S7 sys-tems and the ability to configure, to optimize and to troubleshoot communication between different S7 systems.
Content Understand different communication networks in S7 system (MPI, PROFIBUS, Industrial Ethernet, PROFINET)
Configure Global Data and S7 Basis Communication using MPI networks
Configure FDL connections using PROFIBUS networks Configure S7 connections using PROFIBUS or Ethernet net
works Understand ISO and TCP/IP transport protocols Understand different networking components for Industrial
Ethernet and PROFINET (SCALANCE) Configure a PC Station Configure OPC communication Understand system features of PROFINET Configure a PROFINET I/O system
Courses in Detail
Course Title Certified PROFIBUS Installer
Course Code PROF-CPI
Course Duration 1 days
Requirements None
Description An essential course for electrical engineers and technicians need-ing to upgrade their skills in the installation and testing of PROFIBUS networks.
-
Sit
ra
in S
ing
ap
or
e
17 Course Title Certified PROFIBUS - DP Engineer
Course Code PROF-CPE
Course Duration 3,5 days
Requirements None
Description The 'Certified PROFIBUS Engineer' course is a worldwide recog-nized training program. It is standardized by PROFIBUS Interna-tional to create a quality platform for PROFIBUS qualified per-sons who are acknowledged by an official exam.
The Standard Certified PROFIBUS Engineer course is an intensive hands-on and theoretical 3,5-days training program. On the last day there will be an exam. After passing the exam, the attendee gets the title Certified Engineer' and will be officially registered. The registration is valid for 3 years. Extension is granted after a fresh up course. This course covers in details the technology, design and operation of PROFIBUS-DP network.
Content Networking Basics Token passing Masters and slaves Baudrates Message formats SAPs OSI model
Content Basic PROFIBUS network technology, station types and address-ing, network configuration and start-up
Causes, effects and avoidance of transmissionline reflections and the importance of correct linetermination
Network and segment size limitations and the effect of trans-mission rate
Common wiring and layout pitfalls, modern cable and connec-tor systems
Use of repeaters, couplers, link modules and fibreoptic seg-ments
Wiring and installation testing and the use of bus test tools Interference pickup (EMC), cable routing and earthing consid-
erations
-
Sit
ra
in S
ing
ap
or
e
18
The technology of RS 485 Electrical specifications and measurability Topology Number of connections Stubs Termination Cable specifications and types Redundancy Grounding and shielding
Network components Connectors Repeaters Bus terminals OLMs Active termination DP/DP couplers
Test and measurement equipment Handheld tools Busmonitors Oscilloscopes Trigger tools
Bus parameters and cycle times Tslot, Max_TSDR, etc. Watchdogs Repeats Min_Slave_Intervall HSA
The technology of DP Diagnosis, Parameters and Configuration Sync and Freeze GSD files Cyclic and acyclic Interface with PLC/DCS Practical exercises Creating networks with the help of configuration tools Using the ProfiTrace Analyzer (Live List, logging, analyzing) Setting bus parameters Class 2 functions Generating and reading diagnostics Troubleshooting (cable break, double address, faulty configura-
tion) And many more subjects......
-
Sit
ra
in S
ing
ap
or
e
19
Course Title Certified PROFIBUS PA Module
Course Code PROF-CPA
Course Duration 1,5 days
Requirements Certified Profibus Engineer (CPE)
Description The Certified Profibus PA module takes 1,5 days (including the exam) and is fully concentrated on PROFIBUS PA. It is only acces-sible for people who have passed the Standard Certified PROFIBUS Engineer course.
Content Differences between DP and PA Available DP/PA couplers and links Currents, voltages and limits Connections Specifications Performance Required busparameters The technology of MBP Electrical specifications and measurability Topology Stubs Termination Cable specifications Grounding and shielding Explosion safety and solutions Parameters and profiles The structure of cyclical read and control values Status value Profile GSDs and Ident numbers Parameters sets from a variety of instruments Difference and applications od FDT/DTM/DDL Practical exercises Creating networks with the help of configuration tools Setting parameters at instruments Generating and reading diagnostics Measurement with an oscilloscope (signal and noise analysis) Using the ProfiTrace Analyzer and PA Probe Calculating currents and voltages And many more subjects...
-
Sit
ra
in S
ing
ap
or
e
20
Course Title Profibus Maintenance and Troubleshooting
Course Code PROF-MT
Course Duration 2 days
Requirements None
Description This training is fully concentrated on those who install and main-tain PROFIBUS installations. This module supplies a complete knowledge package that can be put into practice immediately. The attendee will learn how to analyze, localize and solve a prob-lem. Theory about cabling, shielding, grounding and measure-ment tools is the basis of this knowledge. With the help of practi-cal exercises, the participant will put theory into practice. At the end of the training, participants are fully capable to main-tain, strategically localize, analyze and solve problems in PROFIBUS installations. The participants will also have knowledge about cabling techniques, shielding, grounding and PROFIBUS components. They will also be able to handle the necessary measurement tools.
Content Theory Technology of PROFIBUS DP and PA RS 485 and MBP-IS properties Cabling techniques Grounding and shielding DP/PA segment couplers, repeaters and OLMs Strategy of fault finding Measurement tools Practical exercises Protocol analysis with the ProfiTrace Analyzer Signal analysis with the Handyscope Cable measurements with a multi-meter and BT200
-
Sit
ra
in S
ing
ap
or
e
21
SIMATIC PCS7 (DCS System)
SIMATIC PCS7 System Engineering
SIMATIC PCS7 Process Safety SIMATIC PCS7 Batch
Recommended Learning Path
-
Sit
ra
in S
ing
ap
or
e
22
Course Title SIMATIC PCS7 System Engineering
Course Code ST-PCS7SYS
Course Duration 5 days
Requirements Background in Automation
Description This course is designed for participants who are responsible for project design, development and commissioning a PCS7 system. The goals of this course are to aggressively help the participants learn a basic system configuration and project design using stan-dard system tools and libraries. This course begins with the par-ticipants defining a typical project and planning the system archi-tecture. The participants eill then actively build, test and debug a simple PCS7 process system exploring the AS, ES and OS engi-neering environments. Hands-on lab exercises are used to build experience with system engineering, process optimization and common troubleshooting.
Content Define the requirements and components of a PCS7 system so-lution
Perform a basic system configuration Build a basic CFC using standard system tools and libraries Build a basic SFC using standard system tools and libraries Build a basic OS configuration using standard system tools and
tag interfacing Build and test basic networks communications including MPI,
Ethernet and Profibus DP Perform a basic system check out using standard system tolls
and diagnostics Use the Help, Documentation and On-line tools Perform basic system administration and project management
functions
Course Title SIMATIC PCS7 Batch
Course Code ST-PCS7BTH
Course Duration 5 days
Requirements SIMATIC PCS7 System Engineering (ST-PCS7SYS)
Courses in Detail
-
Sit
ra
in S
ing
ap
or
e
23
Course Title SIMATIC PCS7 Process Safety
Course Code ST-PCS7PS
Course Duration 3 days
Requirements SIMATIC PCS7 System Engineering (ST-PCS7SYS)
Description This course introduces the participant to the unique features and benefits of the Siemens Safety Instrumented System (S7-400F/FH). The course begins with an introduction to Safety System concepts and goes on to explain how the features of the S7400F/FH system can be used to build an effective emergency shutdown system or high availability control system. The Safety Matrix, a programming tool available for use with the S7400F/FH system, is also covered.
Content Use the S7400F/FH diagnostics and safety features to meet op-erational requirements
Establish the proper hardware configuration of the CPU and sig-nal modules to ensure appropriate system response to a danger-ous condition
Use the Safety Library blocks to create a safety shutdown pro-gram
Use the Safety Matrix programming tool to configure a shut-down system
Description This course is an introduction to Siemens PCS7 SIMATIC Batch processing. Participants will review a typical batch process model to understand process elements and terminology. Participants will then use a sample batch process to learn batch tools, manage-ment and control skills. Security, system administration and batch control techniques topics are included. Recipe generation and planning considerations are also discussed.
Content Define the terms and procedural model according to the ISA S88.01
Define hardware and software requirements to implement SI-MATIC Batch
Perform batch planning and configuration Use the Batch Control Center Create a recipe Define and configure batch materials Generate standard reports and messages Run and manage a batch
-
Sit
ra
in S
ing
ap
or
e
24
Course Title CompTIA RFID + Certification
Course Code ST-RFID4U
Course Duration 4 days
Requirements General Computer Knowledge
Description This course is organized together by Siemens and RFID4U (http://www.rfid4u.com), a worldwide leader in vendor neutral RFID learning solutions. This course is designed for all Auto-ID professionals, RF engi-neers, system integrators and users who need to gain critical skills to install, maintain or troubleshoot RFID-based systems. Based around CompTIAs RFID+ certification, our intense, hands-on certification training course is presented in a vendor neutral environment. In this course, youll go beyond the RFID+ certification and dem-onstrate the concepts covered on the RFID+ exam in a real-world, hands-on environment. This course has been reviewed and approved by the Computing Technology Industry Association (CompTIA) as quality training materials through the CompTIA Authorized Quality Curriculum (CAQC) program. This recognition identifies these courses as meeting the strictest quality standards set by CompTIA to ensure it meets exacting requirements with regard to the complete cov-erage of exam content, as well as excellent content layout and instructional design material that helps certification candidates judge their learning or readiness for the certification exam. For participants, who do not wish to take the CompTIA RFID+ exam, you may join this course to have a better and detailed un-derstanding of RFID systems and standards.
Content Building blocks of the RFID system tags, interrogators (readers), and RFID appliances
Configuration of interrogation zones How to select the right tag, media, and adhesive; Optimum tag
placement on RF lucent and opaque products RF physics, different standards, regulations, and impact on the
design of an RFID network How to evaluate RFID hardware to design a system that meets
the performance requirements as it relates to read distance, write distance, tag response time, and storage capacity
To conduct a site analysis before, during, and after installation and critical success factors
Best practices for installation How to test and troubleshoot to optimize system performance
and tuning Expert tips and techniques
RFID (Radio Frequency Identification)
-
Sit
ra
in S
ing
ap
or
e
25
Course Title Micromaster MM4 Drive
Course Code SD-MM4
Course Duration 2 days
Requirements None
Description The course is aimed at service and commissioning personnel. It provides the participants with basic technical knowledge for start-up and maintenance of MICROMASTER 440. The training includes some basic information and is therefore also appropri-ate for beginners in drives.
Content Basics of induction motors Basics of converters Handling of parameters with BOP, AOP PC-Tools DriveMonitor and Starter Commissioning of V/f-characteristics and vector control Handling of the free programmable terminals (BiCo) Special functions like DC-Braking Faults and Alarms Practical exercises at training cases (MM 440)
Drives | Motion Control
Course Title MASTERDRIVES Service and Commissioning
Course Code SD-MD
Course Duration 4 days
Requirements Basic knowledge in Drives
Description This course is designed for Service and Commissioning personnel to configure the MASTER DRIVE VC (Vector Control). Simple ex-amples help the trainees to obtain the necessary basic knowledge to allow them to use the system quickly and easily for their own applications.
Courses in Detail
-
Sit
ra
in S
ing
ap
or
e
26
Course Title SINAMICS S120 Service and Commissioning
Course Code MC-S120
Course Duration 5 days
Requirements Basic knowledge in Drives
Description This training course encompasses the basics of the SINAMICS S120 drive system. It provides the technical knowledge required for startup, parameterization, drive optimization, and trouble-shooting. Practical exercises for reinforcing the knowledge gained are carried out on the SINAMICS S120 Training Case. On completion of the course, you will be able to implement automa-tion solutions with the SINAMICS S120. You can carry out startup and optimization of the SINAMICS S120 quickly and effectively with skilful use of the STARTER commissioning tool.
Content Operating Instructions Design of the drive system and overview of documentation and service
Startup and parameterization with the STARTER commissioning tool
Diagnostics and troubleshooting Fundamentals of communication via PROFIBUS Software functions, closed-loop control and optimization of
SERVO and VECTOR drives Startup of the integral basic positioner (EPOS) Practical exercises on the Training Kit
Content Introduction to Master Drives Motor theory Inverter theory Programming of the unit Basic configuring steps via PMU-keypad Using OP1s-keypad unit Basic fault finding Communication using Simovis software package Upreading and Downloading of backup files Configuring of PROFIBUS-DP and SIMOLINK Operating Instructions (including fault list) Function diagrams Parameter List Practical exercises
-
Sit
ra
in S
ing
ap
or
e
27
Course Title SINUMERIK 840D / 810D Start up and Service
Course Code NC-SINU
Course Duration 5 days
Requirements Basic knowledge in CNC
Description This course is aimed at service personnel and configuration spe-cialists responsible for NC/PLC configuration. The participants will learn how to configure the machine control and gain in depth knowledge about "first commissioning". The required skills for test and diagnosis of the NC and PLC are also part of the course.
Content Overview, philosophy and components of the new SINUMERIK 840D
Operating of the control, operation and data areas Overview of the NC programming commands, Command structures New NC functions and its programming Overall data back-up and reloading of data sets Evaluation of fault and diagnostics displays Machine data (MD) for configuring the control and drives Explanation of the control function and its adaptation to the
machine tool by means of MD and interface signals Drives optimization using commissioning tools NC-/PLC-interface structure and interface signals PLC-basic interface program, PLC functions Structure of the PLC user program Commissioning of the integrated SIMATIC S7-300 Software updates/upgrades Practical training for commissioning and fault detection on ex-
tensive training units with digital feed and spindle drives
SINUMERIK CNC
-
Sit
ra
in S
ing
ap
or
e
28
Course Title SIMOCODE pro Engineering and Commissioning
Course Code ST-SIMO
Course Duration 2 days
Requirements Basic knowledge of switchgear and controlgear
Description In this training you will learn how the SIMOCODE pro system func-tions. You will acquire general knowledge of the many different ways in which these devices can be implemented and will learn how to use the testing and diagnostic functions as well as how the devices are linked together via PROFIBUS network.
Content Understand different range of SIMOCODE pro system (current detection modules, basic unit, expansion modules, operator control modules, accessories)
Use SIMOCODE pro functions (motor protection and control functions, monitoring and diagnostic functions, logic functions)
Parameterize and Diagnose with SIMOCODE ES Link SIMOCODE pro to PROFIBUS networks
Motor Protection & Control
-
1
2
3
4
sitrain Course Registration Form (Please complete this form legible or in capitals, fax to A&D sitrain 6490-6989)
Contact Name Company
Fax Telephone
Participant Job Title
Participant Job Title
Participant Job Title
Participant Job Title
Billing Address
Billing Address (cont.) Email
Telephone Fax
Date, Company chop, Signature
Email
Course Title Starting Date Course Code
Terms and Conditions: 1. Course registration is on first-come-first-served basis. 2. Full payment has to be made before commencement of
the course. 3. The participant is bindingly registered for the course
after receiving the official course confirmation including the payment information.
4. If the participant cancels the course after receiving the official course confirmation, he will be charged 30% of the course fee. The participant also has the possibility to send a replacement.
5. The Centre reserves the right to charge 50% of the course fee if a participant cancels in less than two weeks before the course.
6. The Center reserves the right to reschedule a course in any event, and in such cases, course participants can choose to withdraw without penalty.
7. Certificates will only be issued to participants with 75% attendance and course fee paid to Siemens.
Siemens Pte. Ltd.
60 MacPherson Road Singapore 348615 +65-6490-6988 +65-6490-6989
Co
nta
ct C
ou
rse
Pa
rticipa
nts
Billin
g
For further information, please also visit our website www.siemens.com.sg/ad
-
Siemens Pte. Ltd.
Sitrain - A&D Training Center 60 MacPherson Road Singapore 348615 +65 6490 6988 +65 6490 6989 Email: [email protected]