mahogany plankPM0117

cherry plank PM03

red oak plank PM04

maple 2 stripPM5617

white oak plankPM0917

mahogany 2 stripPM5117

cherry 2 stripPM5317

beech plank PM0517

maple plank PM0617

birch plank PM0817

rustic oak plankPM1017

american walnut plankPM14

mutene plank PM0217

cherry 2 strip PM5317walnut 2 strip PM5717

®

C O R K F L O O R I N G S I N C E 1 8 6 8

chestnut plankPM15

red oak 2 stripPM5417

sucupira plankPM17

walnut 2 stripPM5717

*Allow an extra 10 days delivery for these itemsHardwearing pvc surfaced real wood floor tilesPlank: One width timber per tile2-Strip: Two widths timber per tileTile Size: 900 x 150 x 3.2mm

*

*

*

*

**

*

*

WOOD-O-CORK

SERIES 4000

Siesta Cork Tile Co.

Stick down cork and wood flooringsThese two ranges offer a wide choice of cork and real wood veneer finishes, available astiles or planks respectively, to be glued to the subfloor. Both products are suitable for mostcommercial and residential installation and can be combined to offer a unique design finish.

Hard Wearing Clear PVC Surface

Real Wood or Cork Veneers

Unique Cork Core

Adhesion Base Layer

Key Cork Benefits

� Excellent sound impact reduction (see technical information sheet)

� Cork core provides a soft walk and is comfortable to stand on

� Excellent thermal properties

� Fire resistant

� Easy to maintain — damp mop-wipe clean

� Real wood and cork veneers for a naturally beautiful finish

� Environmentally friendly product as cork can be harvested every 9 years

� Excellent indentation resistance and recovery

� Suitable for kitchens, play rooms, offices, shops and hotels

� 10 year warranty on the surface layer both commercially and residentially

®

C O R K F L O O R I N G S I N C E 1 8 6 8

DATASHEET No.21

CI/SfB

(43) Tj5

red oak 2 stripPM54

mahogany 2 stripPM51

moonlight I201secrets I219

nightshade I221

rhapsodyES12

Importers and Distributors

Siesta Cork Tile Co.Unit 21 Tait Road Gloucester Road Croydon Surrey CR0 2DP

Tel: 020 8683 4055 Fax: 020 8683 4480

WICANDERS Series 2000 ‘Corkmaster’and Series 4000 ‘Wood-O-Cork’

(a) No changes in the wear layer nor delamination – (b) No damage of the wear layer – (c) Rate 6 of the blue scale; Rate 4 of the grey scale. Technical data subject to change.

ADHESIVECorkmaster and Wood-O-Cork can be installed on concrete, plywood, fibreboard and wooden floors. However, in all cases the sub-floor must be clean, dry,smooth, level and free from anything that may impair good adhesion. The adhesive that should be used is Wicanders W-336.This is a water based dispersion adhesive especially developed for our Corkmaster and Wood-O-Cork products. The amount of adhesive that can be spread atany time depends on the prevailing site conditions. Temperature, humidity and airflow can all affect the open time of the adhesive. It is important to use an ’A2notch trowel’ and to only spread sufficient adhesive that can be laid into whilst it is still wet – i.e. within 15-20 minutes. Typically we would expect this to bearound 2-3m 2 at a time.

Specifications

3

2

2

2

2

A large range of 'cork products' are available from Siesta Cork Tile Company which includes floor tiles - 'HD88' Acrylic sealed; 'Siesta' Hardwax finish; Ambientecoloured cork floor tiles; Rubbercork for additional sound insulation. Visit our website: www.siestacorktiles.co.uk

Siesta Cork Tile Co. Unit 21 Tait Road Gloucester Road Croydon Surrey CR0 2DP

Cork is a natural product and there maybe slight variations between samples and tiles supplied. Check tiles acceptable in all respects before laying. The colours ofthe tile products illustrated in this brochure are as accurate as the limitations of the printing process will allow. Please refer to actual product samples before purchasing.

Laying method Stick down

Finishing Hard wearing surface

Test Standard Unit Series 2000 Series 4000

Level of use

Domestic EN685 class 23 23

Commercial EN685 class 33 33

Industrial EN685 class 42 42

General propertiesDimensions EN427/EN428 mm 300x300x3.2 900x150x3.2

Inches 12x12x8 36x6x8

Wear layer thickness EN429 mm 0.5 0.5

Apparent density EN436/EN672 kg/m >800 >800

Mass per unit area EN430 g/m 2700 3000

Safety properties

Fire resistance DIN 4102-1 class B1 B1

Surface flammability DOC FF 1-70 Pass/fail Passes Passes

Critical radiant flux ASTM E648 Watts/cm .70 .74Specific optical density ASTM E662-97 Density Flaming: 234/ Flaming: 246/

Non flaming: 294 Non flaming: 288

Static coefficient of friction ASTM C1028-89 Coeff. Dry: .76; Wet: .92 Dry: .69; Wet: .67

Additional propertiesImpact sound reduction ISO 140-8 dB 9 –

DIN 52210 dB ... 6

NRC Noise reduction class ASTM E423-90a dB 0.05 0.05

STC sound transmission class ASTM E413-87 dB 53 53

IIC Impact insulation class ASTM E989-89 dB 50 50

Surface noise radiation ANSI S12.32-1990 dBA 89.6 89.6Thermal resistance DIN 52612 m K/W 10˚C: 0.0393 10˚C: 0.033

ASTM C-518 (R-value) 0.31 0.31

Heat dissipation DIN 52614 KJ/m W1: 36/W10:184 W1: 25/W10:176Wear resistance EN660-1 mm Thickness loss: 0.092 Thickness loss: 0.094

ASTM D38842 Cycles/ Cycles: 13.000/ Cycles: 12.500/Weight loss Weight loss: 1.9 grams Weight loss: 2.21 grams

Castor chair test EN425 effect (a) –

Chair leg resistance EN424 effect (b) –

Residual indentations EN433 mm -0.02 –

ASTM F1914-98 % loss 22.8 19.7

Static load limit ASTM F970-87 Inch(%) .000 Inch (0.0%) .006 Inch (4.2%)

Static electrical propensity EN1815 Volt <2000 <2000Electrical resistance EN1081 Ohm Rv: 1.19x10”/ Rv: 1.19x10”/

Rh: 7.3x10” Rh: 7.3x10”

Colour fastness EN20105 Rating (c) –Colour fastness to light AATCC 16E Rating 1.5(Xenon Arc) (5 is the best) 4.5 2