sign and wind device application 2 - denton, texas · wind device (banners, flags, pennants,...
TRANSCRIPT
Sign (Submit (2) Sign Elevations, (2) Site Drawings & (2) Sign Detail Sheets with attachment and electrical detail) Banner/Wind Device (Complete Bottom Portion) Sign Application: Name of Business:_____________________________ Address where sign will be placed:
Sign Contractor Name Phone
Address City State Zip
Business Owner Name Phone
Address City State Zip
Electrical Subcontractor Name Phone
Address City State Zip
Applicant (Print): _________________________________ Signature _________________________________________
E-mail _______________________________________________
# of Existing Signs:_______________ Reface only: Yes No Street Frontage _________________ feet (Ground Sign)
Sign illuminated: _______External _______ Internal _______ Not illuminated
Zoning __________________________ This sign is located in the Downtown Implementation Plan area (DTIP).
Type of sign:
All Sign Dimensions: Effective area in square feet: ____________________ Height in feet (measured from ground to top of sign): ____________________
Ground Sign Setbacks: Left side setback: ___________________________ Right side setback: ___________________________
Front yard setback: __________________________ Back yard setback: _________________________ All ground signs over fifteen (15) feet in height must have two engineered drawings, sealed by a professional engineer. The sign ordinance
requires that all ground, roof, and projecting signs be designed and installed to withstand a wind pressure of not less than twenty (20) pounds per square foot of area.
Wind Device (banners, flags, pennants, inflatables, etc.) Application: Note: Wind devices are only valid for the display of banners, flags, pennants, streamers, balloons, and inflatable’s. Wind Devices shall not be attached to trees, placed in public rights-of-ways or easements, attached to utilities poles, street signs, or any other forms of public property. Inflatable’s and balloons on the ground are restricted to a height no greater than 30 feet. Inflatable’s and balloons on the roof of a building shall not extend more than 10 feet above the highest part of the roof. For more information on Wind Device Regulations, review Ordinance No. 2014-406
Address where wind device will be placed:
Name of Business: Phone
Address City State Zip Type of wind device to be used. Please check all that apply. Pennant(s)
Small Balloon(s) (Blow-Up Type)
Large Air Balloon(s) (No taller than 30’ from ground or 10’ from roof to top of balloon)
Streamer(s) Banner(s) Flag(s)
Other (please specify): ______________________________________________________________________ Notice: I understand that I am hereby given notice that my wind device(s) must be removed in thirty (30) days, from date of issuance of permit, or I may be subject to a fine of up to $2,000 per day. ______________________________________________________________________________________________________________________________________ Print Signature E-mail Date
Sign and Wind Device Application
215 W Hickory Street Denton, TX 76201 Phone 940-349-8360
Fax 940-349-7208
Permit #
Date
Wind device # of #3