signage & wayfinding standards manual · new signage and wayfinding system page 2:1 signage...

47
PAGE 2:1 NEW SIGNAGE AND WAYFINDING SYSTEM SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several elements of the visual vocabulary were explored to implement a successful wayfinding pro- gram at the University. Differing Color Palette and Typography options were evaluated. The final concept, which is applicable to any UAlbany campus, is based on form and materials solely, rather than on color. Different sign materials are used to differentiate signage on the three cam- puses, with the exact sign materials specified in the individual sign type descriptions in the New Signage and Wayfinding System section below. Sign Type Functionality Definition In establishing a visual vocabulary for the wayfinding program, the following conceptual elements were considered: color, typography, symbols, materials, and structural form. The design characteristics of the various sign types are consistent with the University’s aesthetic standards. On select sign types, UAlbany’s logo is used to help reinforce the UAlbany brand. The sign program reinforces the character of the cam- pus — architecturally, thematically, and with regard to overall ambiance. This approach to the signage elements includes cre- ative and modular solutions reflecting the University’s position as an active campus with a high concentra- tion of nighttime activity. The solutions use some sur- face lighting, a high contrast between typography and background, changeable features to message, and mapping inserts. The goals and objectives of the Master Plan, in con- junction with the above-referenced site analysis, initial feedback from the Wayfinding Team and requirements of the ADA, guided the definition of a schematic array of appropriate sign types for both the exterior and the interior of all UAlbany campuses. While the particulars of visual aesthetics of the exterior and interior sign type vocabularies (color, structural form, typography, branding) were established/selected in response to three different possible options, the basic or schematic form of each sign type, as well as the messaging intent, remain constant across the aesthetic options. A coordinated family of wayfinding elements and sign types is proposed to support the wayfinding methodol- ogy presented earlier. These sign types function primarily in one of three ways: Direction-giving (D), Identifying/Informative (I), and Regulatory (R). Destination Listing Hierarchy On vehicular and pedestrian directional signage, des- tinations should be grouped by direction as follows — left, then right, then straight ahead — and listed that way from top to bottom on the sign face. On vehicular signage, this gives drivers time to anticipate upcom- ing turns and position their vehicles appropriately (into a left-hand turn lane for a left-hand destination, for example). Carrying the same logic into pedestrian directional signage makes for a more consistent pre- sentation of information between sign types, and rein- forces the wayfinding logic. Within each directional grouping, destinations should be listed alphabetically to help drivers and pedestrians quickly locate the destination of their choice using a familiar information hierarchy. While other hierarchies are possible (importance, arrival order, etc.), these hierarchies are less intuitive to the first-time visitor and are harder to administer and keep consistent in the future as destinations change. This same hierarchy (grouping destinations by direc- tion, and then alphabetically within the directional groupings) should be applied to interior wall directional signs. This will further reinforce the wayfinding logic. Considerations Changeability The new signage system was designed to accommo- date updating selected graphic information whether via surface-applied vinyl messages and graphics, eco- nomical large-format map prints or modular hardware components that allow easy message panel disas- sembly and replacement. ADA Compliance The ADA guidelines regarding sign message color/ value contrast, letterform style, and barrier-free acces- sibility messaging are relevant to exterior signage and has been observed. Letterform sizes, while addressed by the ADA concerning interior signage primarily, are sufficient to assure easily read messages for the appropriate sign type’s viewing conditions. Lighting The exterior direction-giving signs are not internally illuminated. The use of reflective graphics, and in selected locations the use of up-lighting, should pro- vide full visibility for the viewer. Up-lighting should be mounted in-grade and centered on the sign, and placed and aimed using the manufacturer’s guidelines and specifications. Surface light levels should typically fall between 15 and 25 footcandles. A time clock or photo-electric switch to control the light should be dis- creetly, but functionally, incorporated. The choice must be made based on the particular sign’s lighting on/off intent. Terminology Consistent terminology is used on all directories, directional signs, department identifiers, and maps.

Upload: doantu

Post on 29-Jul-2018

243 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

P A G E 2 : 1N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

Revised 6/09/15

I N T R O D U C T I O N T O T H E S I G N D E S I G N C O N C E P T

Several elements of the visual vocabulary were explored to implement a successful wayfinding pro-gram at the University.

Differing Color Palette and Typography options were evaluated. The final concept, which is applicable to any UAlbany campus, is based on form and materials solely, rather than on color. Different sign materials are used to differentiate signage on the three cam-puses, with the exact sign materials specified in the individual sign type descriptions in the New Signage and Wayfinding System section below.

Sign Type Functionality Definition

In establishing a visual vocabulary for the wayfinding program, the following conceptual elements were considered: color, typography, symbols, materials, and structural form. The design characteristics of the various sign types are consistent with the University’s aesthetic standards. On select sign types, UAlbany’s logo is used to help reinforce the UAlbany brand. The sign program reinforces the character of the cam-pus — architecturally, thematically, and with regard to overall ambiance.

This approach to the signage elements includes cre-ative and modular solutions reflecting the University’s position as an active campus with a high concentra-tion of nighttime activity. The solutions use some sur-face lighting, a high contrast between typography and background, changeable features to message, and mapping inserts.

The goals and objectives of the Master Plan, in con-junction with the above-referenced site analysis, initial feedback from the Wayfinding Team and requirements of the ADA, guided the definition of a schematic array of appropriate sign types for both the exterior and the interior of all UAlbany campuses. While the particulars of visual aesthetics of the exterior and interior sign type vocabularies (color, structural form, typography, branding) were established/selected in response to three different possible options, the basic or schematic form of each sign type, as well as the messaging

intent, remain constant across the aesthetic options.

A coordinated family of wayfinding elements and sign types is proposed to support the wayfinding methodol-ogy presented earlier.

These sign types function primarily in one of three ways:

Direction-giving (D), Identifying/Informative (I), and Regulatory (R).

Destination Listing Hierarchy

On vehicular and pedestrian directional signage, des-tinations should be grouped by direction as follows — left, then right, then straight ahead — and listed that way from top to bottom on the sign face. On vehicular signage, this gives drivers time to anticipate upcom-ing turns and position their vehicles appropriately (into a left-hand turn lane for a left-hand destination, for example). Carrying the same logic into pedestrian directional signage makes for a more consistent pre-sentation of information between sign types, and rein-forces the wayfinding logic.

Within each directional grouping, destinations should be listed alphabetically to help drivers and pedestrians quickly locate the destination of their choice using a familiar information hierarchy. While other hierarchies are possible (importance, arrival order, etc.), these hierarchies are less intuitive to the first-time visitor and are harder to administer and keep consistent in the future as destinations change.

This same hierarchy (grouping destinations by direc-tion, and then alphabetically within the directional groupings) should be applied to interior wall directional signs. This will further reinforce the wayfinding logic.

Considerations

ChangeabilityThe new signage system was designed to accommo-date updating selected graphic information whether via surface-applied vinyl messages and graphics, eco-

nomical large-format map prints or modular hardware components that allow easy message panel disas-sembly and replacement. ADA Compliance

The ADA guidelines regarding sign message color/value contrast, letterform style, and barrier-free acces-sibility messaging are relevant to exterior signage and has been observed. Letterform sizes, while addressed by the ADA concerning interior signage primarily, are sufficient to assure easily read messages for the appropriate sign type’s viewing conditions.

Lighting

The exterior direction-giving signs are not internally illuminated. The use of reflective graphics, and in selected locations the use of up-lighting, should pro-vide full visibility for the viewer. Up-lighting should be mounted in-grade and centered on the sign, and placed and aimed using the manufacturer’s guidelines and specifications. Surface light levels should typically fall between 15 and 25 footcandles. A time clock or photo-electric switch to control the light should be dis-creetly, but functionally, incorporated. The choice must be made based on the particular sign’s lighting on/off intent.

Terminology

Consistent terminology is used on all directories, directional signs, department identifiers, and maps.

Page 2: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E MRevised 9/21/11

C O L O R S A N D M A T E R I A L S

Primary Colors

Secondary Colors

Materials

GOLD METALLICPaint: Matthews MP21249 Gold MetallicVinyl Opaque: Avery Gold A3715-M

BLACKPaint: Matthews 41306SP Signal Jet BlackVinyl Opaque: Avery A8080-0 Matte Black

DARK GRAYPaint: Matthews MP04761 Steel WoolAPCO color: A54 Graphite

WHITEPaint: Matthews Natural White 42-202 Vinyl Opaque: Avery A8002-0 Matte WhiteVinyl Reflective: Avery A7801-R White

Pantone: 1797 CVinyl Opaque: Avery A9305-0 Holiday Red Vinyl Reflective: Avery A7818-R Dark Red

Painted Aluminumto match Bethel White Granite(for Uptown and East Campuses)

Cast Concrete withprotective seal

Bethel White GraniteMatte finish(match to Polycor sample;for Uptown and East Campuses)

Avonite Simulated Granite

Limestone (matches architectureof Downtown Campus)

Painted Aluminumto match Limestone(for Downtown Campus)

Red Brick(matches architectureof Downtown Campus)

Vinyl Opaque: Avery A8565-0 Intense BlueVinyl Reflective: Avery A7820-R Light Blue

Pantone: 403 CPantone: 142 C

Pantone: 124 CPantone: 116 CVinyl Opaque: Avery A8120-0 Canary Yellow

Pantone: 151 CVinyl Opaque: Avery A8160-0 Orange

Vinyl Reflective: Avery A7822-R BluePantone: 269 CVinyl Reflective: Avery A7823-R Purple

The colors shown here are approxi-mations of the primary signage background colors, secondary col-ors, and materials used throughout the wayfinding system. The specific colors used for each sign type are indicated on that sign type’s page.

Note: consistent and accurate color reproduction in this document can-not be assured due to the limitations of color copying technology.

The fabricator is responsible for matching all colors and materials as specified (or already in use) and is required to provide the University at Albany with color and material samples for approval.

Either the Coated Pantone Matching System®, Avery (or 3M) vinyl sys-tem, or Matthews Paint System* is used for specifying signage color matches. (In the absence of actual sign material color chip reference sets, actual specified product color swatches should be referenced for color matching.)

Actual finishes on signage are to be matte or low luster (not shiny or glossy) and exclusively a pre-mium acrylic polyurethane (signage paints produced by Matthews Paint Company are to be the standard reference).

* The Matthews Paint System is a recognized standard in the sign industry. For more information on the Matthews Paint System, write to:

Matthews Paint LakeView Corporate Park 8201 - 100th Street Pleasant Prairie, WI 53158 (800) 323-6593

or go to:

http://www.ppg.com/car_signpaint/

Page 3: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E MRevised 6/09/15

S Y M B O L S

S1: arrow S2: no parking S3: parking S4: drop-off/pick-up area S5: bus stop S6: barrier-free access S7: barrier-free elevator

S8: elevator S9: stair S10: telephone S11: atm/bank S12: text telephone S13: food S14: restroom

S15: men's restroom S16: women's restroom S17: locker S18: women's locker S19: men's locker S20: shower S21: no smoking

S22: no celluar phones S23: no entry S24: fire/stair exit S25: biohazard S26: radiation S27: information S28: no rollerblading

S29: no skateboarding S30: no biking

5.333x

x

4.125x

1.333x45¡

S31: Emergency Phone S32: Motorcycle

The symbols shown here represent those typically occurring on signage at the University at Albany.

All symbols are approved by one or more of the following agencies or trade groups:

United States Department of Transportation (DOT)

American Institute of Graphic Arts (AIGA)

Society for Environmental Graphic Design (SEGD)

International Council of Graphic Design Association (ICOGRADA)

No symbology substitutions from those shown are allowed; electronic art for these symbols is available from the University.

Page 4: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E MRevised 9/21/11

T Y P O G R A P H Y

alternative letter "I"DIN Schrift Engschrift Aa Bb Cc Dd Ee Ff Gg Hh Ii Jj Kk Ll Mm Nn Oo Pp Qq Rr Ss Tt Uu Vv Ww Xx Yy Zz 0 1 2 3 4 5 6 7 8 9

adobe TRAJAN Bolda b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9

DIN Schrift Mittelschrift Aa Bb Cc Dd Ee Ff Gg Hh Ii Jj Kk Ll Mm Nn Oo Pp Qq Rr Ss Tt Uu Vv Ww Xx Yy Zz 0 1 2 3 4 5 6 7 8 9

Font Family: DIN SchriftenFont: DIN Schrift Engschrift

Font Family: DIN SchriftenFont: DIN Schrift Mittelschrift

Font Family: Adobe TrajanFont: Adobe Trajan Bold (uppercase only)

Adobe Garamond ItalicAa Bb Cc Dd Ee Ff Gg Hh Ii Jj Kk Ll Mm Nn Oo Pp Qq Rr Ss Tt Uu Vv Ww Xx Yy Zz 0 1 2 3 4 5 6 7 8 9

Font Family: Adobe GaramondFont: Adobe Garamond Italic

The fonts selected for the University at Albany sign program are Trajan Bold, DIN Schriften, and Garamond.

DIN Schriften is a sans serif font that is clean and legible, and offers a compressed weight for direc-tional and identification purposes. Its form works well with that of the campus architecture and geometry. An alternate form of the letter “I” is recommended for the Building Identifier Letter sign types (IB-1 and IB-2). See pages 2:11 and 2:12 for examples.

Trajan is an all-uppercase font which is used in the University’s identity and reflects the history, elegance, and sophistication of this institution. It is used primarily for identification and donor recognition purposes.

Since Trajan is only available in uppercase, Garamond Italic was selected to work in harmony and offer greater legibility for large amounts of copy on donor recogni-tion signage.

Please refer to the individual sign type drawings for guidance on the use of fonts. Please note that font substitutions are not acceptable.

It is recommended that the University and selected fabricator purchase these fonts families. They are available from:

Adobe, (800) 682-3623;

http://www.adobe.com/type

Tactile lettersADA tactile letters should be painted using the DIN Schrift Mittelschrift font and have a wider-than-normal-spacing per ADA guidelines.

Braille is the same color as the background (or clear) and the fab-ricator is responsible for accurately creating Grade 2 Braille in support of the tactile message.

Page 5: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 5N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E MRevised 06/19/15

SIGN SHOP CAPABILITY: NONE

SIGN SHOP CAPABILITY: NONE

SIGN SHOPCAPABILITY: NONE

SIGN SHOP CAPABILITY: NONE

SIGN SHOPCAPABILITY: NONE

SIGN SHOP CAPABILITY:

1 VINYL GRAPHICS

2 HARDWARE

SIGN SHOP CAPABILITY:

1 VINYL GRAPHICS

2 HARDWARESIGN SHOPCAPABILITY:

1 VINYL GRAPHICS (insert panels only).

SIGN SHOPCAPABILITY:

1 GRAPHICS

2 HARDWARE

SIGN SHOP CAPABILITY:

1 VINYL GRAPHICS

SIGN SHOP CAPABILITY:

1 GRAPHICS (if vinyl were sub'd for specified silk- screening)

2 HARDWARE

SIGN SHOP CAPABILITY:

1 GRAPHICS (if vinyl or mask & spray were sub'd for specified silk- screening)

SIGN SHOP CAPABILITY:

1 VINYL GRAPHICS

2 HARDWARE

SIGN SHOPCAPABILITY:

1 VINYL GRAPHICS

SIGN SHOPCAPABILITY:

1 VINYL GRAPHICS

SIGN SHOPCAPABILITY:

1 GRAPHICS none

MECHANICAL REPAIR:

2 HARDWARE

SIGN SHOPCAPABILITY: NONE

SIGN SHOPCAPABILITY: NONE SIGN

SHOPCAPABILITY:

1 VINYL GRAPHICS (insert panel only).

2 HARDWARE (insert panel only).

MP-1 - Pedestrian Campus MapColumnar(Uptown)Scale: 1/4"=1'-0"Page 2:34

MP-2 - Pedestrian Campus MapPedestal(all campuses)Scale: 1/4"=1'-0"Page 2:34

MP-1-ModifiedPedestrian Campus MapCabinet Mounted onExisting Podium Column(Uptown)Scale: 1/4"=1'-0"Page 2:34

AK-Wall MountedPedestrian InformationMounted on Exterior Walls(all campuses)Scale: 1/4"=1'-0"Page 2:39

AK-Column MountedPedestrian InformationMounted on ExistingPodium Column(uptown campus)Scale: 1/4"=1'-0"Page 2:39

AK-Triangular, FSPedestrian InformationMounted to ExteriorPedestrian Walkways(uptown campus)Scale: 1/4"=1'-0"Page 2:39

IT - Trail Identifier(all campuses)Scale: 1/4"=1'-0"Page 2:38

IS - Street Identifier (all campuses)Scale: 1/8"=1'-0"Page 2:45

DV-2 - Vehicular Directional - Pylon (Downtown)Scale: 1/8"=1'-0"Page 2:41

DV-1 - Vehicular Directional - Pylon (Uptown and East)Scale: 1/8"=1'-0"Page 2:40

DV-3 - 7-PanelVehicular Directional - Post & Panel(all campuses)Scale: 1/8"=1'-0"Page 2:42

DV-3 - 10-PanelVehicular Directional - Post & Panel(all campuses)Scale: 1/8"=1'-0"Page 2:42

CD-2a - Donor Building Plaque(all campuses)Scale: 1/8"=1'-0"Page 2:14

CD-2b - Donor Building Plaque(all campuses)Scale: 1/8"=1'-0"Page 2:14

CD-1 - Donor Building Letters -Exterior 8" letters(all campuses)Scale: 1/8"=1'-0"Page 2:13

IB-6 - BuildingIdentifier -Wall-mounted(all campuses)Scale: 1/8"=1'-0"Page 2:21

IB-7 - Building Identifier -vinyl on glass(all campuses)Scale: 1/8"=1'-0"Page 2:22

IB-3 - Building Identifier -Ground (Uptown)Scale: 1/8"=1'-0"Page 2:18

IB-5 - Building Identifier -Ground (East)Scale: 1/8"=1'-0"Page 2:20

IB-4 - Building Identifier -Ground (Downtown)Scale: 1/8"=1'-0"Page 2:19

IN - Tenant Identifier(all campuses)Scale: 1/8"=1'-0"Page 2:24

RE-1 - ADA Entrance Directional Sign - vinyl on glass(all campuses)Scale: 1/4"=1'-0"Page 2:15

RE-2 - ADA Entrance Sign - vinyl on glass(all campuses)Scale: 1/4"=1'-0"Page 2:15

RE-3 - ADA Entrance Directional Plaque(all campuses)Scale: 1/4"=1'-0"Page 2:15

RE-4 - ADA Entrance Plaque(all campuses)Scale: 1/4"=1'-0"Page 2:15

DP-1 - Pedestrian Directional Diagram (Uptown)Scale: 1/4"=1'-0"Page 2:35

DP-2 - Pedestrian Directional - Post & Panel(all campuses)Scale: 1/4"=1'-0"Page 2:36

NB-1 - Bulletin Board - Exterior Four-sided(all campuses)Scale: 1/4"=1'-0"Page 2:37

NB-2 - Bulletin Board - ExteriorSingle-sided(all campuses)Scale: 1/4"=1'-0"Page 2:37

TBBanners(all campuses)Scale: 1/8"=1'-0"Page 2:12

TV-1, TV-2 - VehicularTemporary Message Sign(all campuses)Scale: 1/8"=1'-0"Page 2:46

IP-1 - Parking Identifier (Uptown and East)Scale: 1/8"=1'-0"Page 2:29

IP-2 - Parking Identifier (Downtown)Scale: 1/8"=1'-0"Page 2:30

IP-3 - Parking Identifier - Post & Panel(all campuses)Scale: 1/8"=1'-0"Page 2:31

IP-4 - Parking Aisle Identifier(all campuses)Scale: 1/8"=1'-0"Page 2:32

RP - Parking Regulatory/Informational (all campuses)Scale: 1/8"=1'-0"Page 2:33

IC-1 - Campus Identifier (Uptown)Scale: 1/8"=1'-0"Page 2:25

IC-4 - Campus Identifier (Uptown)Scale: 1/16"=1'-0"Page 2:28

IC-2 - Campus Identifier (Downtown)Scale: 1/8"=1'-0"Page 2:26

IC-3 - Campus Identifier (East)Scale: 1/8"=1'-0"Page 2:27

NE-IC-1 - Campus Identifier (Uptown)Scale: 1/8"=1'-0"Page 2:44

NE - LED Message Sign(all campuses)Scale: 1/8"=1'-0"Page 2:43

IB-1 - Building Identifier - 24" Letters(all campuses)Scale: 1/8"=1'-0"Page 2:16

IB-2 - Building Identifier - 15" Letters(all campuses)Scale: 1/8"=1'-0"Page 2:17

CAMPUS CENTER

BIOLOGY

B U I L D I N G I D E N T I F I C A T I O N

DRAPERHALL

DRAPERHALL

waterburyHall

Athletic ComplexIndian QuadState QuadBig Purple Growl

Colonial QuadDutch Quad

Academic PodiumVisitor P1

I-90 and I-87

Alumni QuadDowntown Albany

2m

4m

Downtown Campus 3m

I-90 and I-87

Alumni QuadDowntown Albany

2m

4m

Downtown Campus 3m

IB-8 - Building Identifier - QuadsScale: 1/16"=1'-0"Page 2:23

DAY NIGHT

Face View

Campus Map Campus Map Campus Map

- W E L C O M E -NEW STUDENTSAND FAMILIES

1 4 0 0

NB-2A - Bulletin Board - ExteriorFour-sided no glass (podium)Scale: 1/4"=1'-0"Page 2:37

text

PI-1, PI-2Pedestrian InformationPedestal(all campuses)Scale: 1/4"=1'-0"Page 2:47

PI-3Plant Indentifier(all campuses)Page 2:47

Honey LocustGleditsia triacanthosHeight: 20 - 30 meters (66 - 98 ft.)

Lifespan: 120 - 150 years

Natural Region: Central North America

C A M P U S I D E N T I F I C A T I O N

V E H I C U L A R D I R E C T I O N P A R K I N G

A D A E N T R A N C E S I G N A G E P E D E S T R I A N D I R E C T I O N P E D E S T R I A N I N F O R M A T I O N

E X T E R I O R S I G N T Y P E A R R A Y

Page 6: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

Massry Center for Business

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 6N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : M A P SRevised 6/09/15

E X T E R I O R M A S T E R M A P S

Page 7: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 7N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : M A P SRevised 7/2/15

E X T E R I O R M A S T E R M A P S

ACADEMIC BUILDINGSACADEMIC PODIUM1 Arts & Sciences H92 Biology G73 Business Administration H104 Campus Center G94.1 Campus Center Expansion (’16) F95 Chemistry G86 Earth Science & Mathematics H87 Education G98 Fine Arts H8 University Art Museum H89 Humanities G910 Lecture Center G911 Life Sciences G712 Physics G813 Social Sciences G10

ARTS/LIBRARIES20 Performing Arts Center G821 Science Library F922 University Library G9

OTHER ACADEMIC BUILDINGS30 Boor Sculpture Studio G431 Building 25 G1232 Massry Center for Business H933 Center for Autism and Related Disabilities B1534 Child Research Study Center B1635 Four Tower Place C16

ADMINISTRATIVE BUILDINGS50 Management Services Center B451 Parking & Mass Transit Building F851.1 Parking & Mass Transit Building (’15) G1252 University Administration Building B353 University Hall H8 Undergraduate Admissions54 University Police E4

ATHLETICS70 Athletic Practice Field C771 Batting Cage 72 Baseball Field C573 Basketball Courts D1174 The Bubble D875 Field Hockey Field D776 Hammer Throw Field D1077 Intramural Field D1078 John Fallon Field (Lacrosse) D779 Low Ropes Course E780 NCAA Track E981 Physical Education D982 Recreational Softball Field F483 Recreational Softball Field J784 Recreational Synthetic Turff Field E1085 SEFCU Arena C986 Soccer Field J787 Casey Stadium/Bob Ford Field C788 Tennis Courts D1189 Varsity Softball Field E1090 Volleyball Court

GARDENS AND FOUNTAINS110 Entry Plaza H9111 Hedy Schwartz Bagatelle Courtyard F9112 Indian Pond D5113 Main Fountain G9114 Podium East Garden G7115 Podium West Garden G10

OTHER130 Alumni House F12131 Grounds Building E5132 Grounds Shed E6133 Indian Commons Renovations (’18) E8134 Information Technology C13135 The Interfaith Center C10136 Mechanical Repair E6137 Service Complex D13138 UKids Childcare Center E10

RESIDENTIALCOLONIAL QUAD150 Clinton I10151 Delancey I10152 Hamilton I10153 Herkimer I10154 Johnson I10155 Livingston Tower I10156 Morris I10157 Paine I10158 Zenger I10

DUTCH QUAD160 Beverwyck E10161 Bleeker F10162 Ryckman F10163 Schuyler E10164 Stuyvesant Tower F10165 Ten Broeck F10166 Ten Eyck F10167 Van Cortlandt E10168 Van Rensselaer E10

INDIAN QUAD170 Adirondack E7171 Cayuga F7172 Mahican F7173 Mohawk Tower F7174 Montauk F7175 Oneida F7176 Onondaga E7177 Seneca E7178 Tuscarora E7

STATE QUAD180 Anthony I7181 Copper I7182 Eastman Tower I7183 Fulton I7184 Irving I7185 Melville I8186 Steimetz I8187 Tappan I7188 Whitman I7

UNIVERSITY APARTMENTS190 Empire Commons Cmty Bldg H12191 Freedom Quad - Lazarus F15192 Freedom Quad - Northup F15193 Freedom Quad - Stanton E15194 Freedom Quad - Truth E15195 Liberty Terrace F15

PARKINGA Building 25 Faculty/Staff G12B Colonial Faculty/Staff H11C Colonial Student (A) I11D Colonial Student (B) H11E Colonial Student (C) G11F Dutch Faculty/Staff F11G Dutch Student E12H Empire North I13I Empire West H13J Empire South G13K Freedom East F15L Freedom North F15M Freedom West F15N Indian Student F6O Liberty Terrace D3P MSC/UAB Faculty/Staff C3Q MSC/UAB Student B2R Northwest Student I12S Podium West Faculty/Staff G11T Physical Education D10U SEFCU Arena/Athletic Complex B9V State Faculty/Staff H6W State Student I6X Visitor Lot 1 F6Y Visitor Lot 1A I10Z Visitor Lot 2 F7

UPTOWN CAMPUSA

B

C

D

E

F

G

H

I

J

K

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

CENTER DRIVE WEST

SOCIAL SCI. DR. S.SOCIAL SCI. DR. N.

HUMANITIES LANE

EDUCATION LANE

CHEMISTRY LANE

LIFE SCIENCES LANE

PHYSICS LANE

BUSINESS LANE

EARTH SCIENCE LANE

LIFE SCIENCE LANE

COLONIAL DRIVE

DUTCH DRIVEINDIAN DRIVE

STATE DRIVE

CENTER DRIVE EAST

CARILLON DRIVE WESTCARILLON DRIVE EAST

LIBERTY LANE

UNI V E R S I T Y DRIVE EAST

U N I V E R S I T Y DRIVE EAST

U N I V E R S I T Y DR I V

E EA S T

To: I-90 East

W E S T E R N A V E N U E ( R T 2 0 )

A L U M N I D R I V E

G R E A T D A N E D R I V E

TRI-CENTENNIAL DRIVE

U N I V E R S I T Y D R I V E W E S T

UNIVERSITY PLACE

I - 9 0

I - 9 0

FULLER ROAD

FULLER ROAD

I - 9 0

F U L L E R R O A D

I-90 Exit 2W A S H I N G T O N A V E N U E

W A S H I N G T O N A V E N U E

W A S H I N G T O N A V E N U E E X T E N S I O N

I-90 Exit 2To : A l u m n i Q u a d 2 . 3 M i l e s , D o w n t o w n C a m p u s - 2 . 8 M i l e s

To : A l u m n i Q u a d 2 . 3 M i l e s , D ow n t ow n C a m p u s - 2 . 8 M i l e s

To : E a s t C a m p u s - 9 . 0 M i l e s

J U S T I C E D R I V E

UNIVERS ITY DR I V E WE S T

EXCELSIOR DRIVE

Note: Students may park in any available Student Permit Required parking areas except for Empire Commons,Freedom Quad, or Liberty Terrace parking areas. Also, please note that all parking is subject to change.Therefore, please pay attention to parking signage.

Reserved

Special Permit Required24 Hours - Everyday

EV Parking24 Hours - Everyday

Zip Car Parking24 Hours - Everyday

Special Dock Permit Required

University Handicap Permit Required

Pedestrian Path - Paved

Pedestrian Path - Unpaved

Purple Path

Bus Stop

Emergency Bluelight Phone

Visitor Parking8:00AM-8:00PM Monday-FridayVisitors must park in visitor parking orat metered parking spaces

Student Permit Required24 Hours - Every Day

Student Permit Required8:00AM-12:00AM Everyday (No Overnight)

Resident Permit Required(Freedom, Empire, Liberty)24 Hours - Everyday

Faculty/Staff Permit Required8:00AM-4:00PM

Faculty/Staff Permit Required24 Hours - Everyday

Official University

PA R K I N G , T R A N S P O RTAT I O N A N D P E D E S T R I A N WA L K WAY L E G E N D

C A M P U S F E AT U R E S L E G E N D

Academic, Athletics, and Library Buildings

Administrative Buildings

Other University BuildingsResidential Buildings

Fountains and Pond

Planned Projects

13

86

2

5 12

20113

S

D

C

R

H

I

J

4

110

52

51

22

182185

186

187188

180

181

184183

164

165

161

167

160 163

168

162

166

173

174172

171

170

178 177

176

175

7776

79

71

8174

85

112

30

137

190

W

G

U

54

50

3433

P

Y

132

AlumniHouse

The Interfaith Center

135

130

11

F

V

S TAT EQ UA D

ACADEMIC PODIUM

C O L O N I A LQ UA D

D U T C H Q UA D

I N D I A NQ UA D

PerformingArts

Center(PAC)

UniversityLibrary

University Art Museum

21

ScienceLibrary

CampusCenter

SEFCUArena

PhysicalEducation

C O L L I N SC I R C L E

M A I N E N T R A N C E

W E S T E R N A V E N U E E N T R A N C E

UniversityPolice

31

SB-ASB-B

SB-C

F1

F3G3

E2

E1

D2

D1

D3

E3

F2G1G2

C4C5

C2C1

C3

B5

B3A3

B4

B2B1A2A1

E M P I R EC O M M O N S

A T H L E T I CC O M P L E X

Stuyvesant Plaza

To : C r o s s g a t e s S h o p p i n g M a l l - 0 . 4 M i l e s

A

115114

X

B

T

136 138

TRI-CENTENNIAL DRIVE

JOSE MARTI DR.

A-1

A-2

A-3

A-4 A-5A-6

A-7 B-1 B-2 B-3 B-4

B-5

B-6

B-7

D-1

D-2

D-3

D-4D-5D-6D-7

C-2

C-3

C-4C-5C-6

C-7

F R E E D O MQ U A D

C-1

To: I-90 West, I-87 North and South

On-Ramp leaves map, loops around and returns to I-90

CAPITAL HILL

L

KM

192

191

194 193

O

158157

156

154155

153 152

151

150

133

134

83

82

89

72

86

7875195

10

Life Sciences

111

87

131

53

UniversityHall

SUNYPolytechnic

Institute

A

70

70

70

7070

32

E

80

To: Northway (I-87 North)To: NYS Thruway (I-90 East/West & I-87 south)

4.1

4

71

51.1

Visitor ParkingVisit

or Pa

rking

35

L I B E R T YT E R R A C E

73

88

8884

73

90

90

90

7

1

9

3

QP

John Fallon Field

Bob Ford Field

ZN

U N I V E R S I T Y D R I V E W E S T

U N I V E R S I T Y D R I V E E A S T

MAP REVISION: AUGUST 2015

Page 8: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 8N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : M A P SRevised 7/2/15

BUSINESS

UNIVERSITYLIBRARY

SOCIALSCIENCES

HUMANITIES EDUCATION

CAMPUSCENTER

SCIENCE LIBRARY

PHYSICS CHEMISTRY

PERFORMINGARTS CENTER

(PAC)BIOLOGY

EARTH SCIENCE& MATHEMATICS

FINE ARTSARTS & SCIENCES

At these stairwells, mountsigns to columnsOn glass; use vinyl backer

Balusters Balusters

8-108-9

8-13

8-14

8-15

8-16

8-17

8-18

8-12

8-11

8-24

8-23

8-22

8-21

8-20

8-19

8-29 8-308-3

8-2

8-1

8-68-5

8-4

8-7 8-8

8-288-27

8-268-25

7-147-13

7-12

7-11

7-10

7-9

7-8

7-77-6

7-5

7-4

7-27-1

7-40

7-39

7-38

7-37

7-36

7-357-34

7-33

7-32 7-31

7-30 7-29

7-28

7-27

7-26

7-25

7-24 7-23

7-21

7-22

7-19

7-20

7-17

7-18

7-15 7-16

6-1

6-2

6-3

6-4

6-5 6-6

6-12

6-11

6-7

6-8

6-9

6-10

? 5-6

? 5-5

?5-4

? 5-3

?5-2

? 5-1

4-54-4

4-3 4-2

4-1b4-1a

3-39

3-37

3-36

3-35

3-34 3-33

3-32

3-31

3-30

3-29

3-28

3-27

3-26

3-25

3-24

3-23

3-223-21

3-203-19

3-183-17

3-133-12

3-11 3-10

3-9

3-8

3-7

3-6

3-53-4

3-3

3-23-1

2

2-25

2-24

2-23

2-21

2-20

2-19

2-18

2-17

2-15

2-14

2-13

2-122-11

2-10

2-92-8

2-7

2-6

2-5

2-4

2-3

2-2

2-1

1111111

11111

1 1 1 1 1 1 1 1 1 1

1

11

1

1

BA-1

SS-1

SS-3

HU-1

HU-2

SS-4

SS-2

BA-2

UL-1

AS-1

BA-3

AS-2

AS-3

FA-1

FA-2

ES-1

FA-3

ES-2

ES-3

BI-1

BI-3

CH-2

CH-1

PA-4

PA-2

PH-1

PH-2

CC-3b CC-3a

CC-5 CC-4

SL-1

SL-2 SL-3

SL-4

UL-3

UL-5

ED-1

ED-2

UL-2

UL-4

PA-5

DP-1 Pedestrian Directional (UA)1

3 IB-1 Building ID-24" Letters

4 IB-2 Building ID-15" Letters

2 DP-2 Pedestrian Directional

5 MP-1 Pedestrian Campus Map?

Sign Locations

Alumni Kiosk Location

6 NB-1 Pedestrian Bulletin Board

7 NB-2 Pedestrian Bulletin Board

8 NB-2A Pedestrian Bulletin Board

Stairs

Buildings

Planter Boxes

Support Columns

Pedestrian Circulation

Legend

A

B

C

D

E

F

G

H

I

J

K

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

8 4 0 8 16

YOU

1

1

1

1

11

1

1 1

E X T E R I O R M A S T E R M A P S

Page 9: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 9N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : M A P SRevised 7/2/15

WESTERN AVENUE

WESTERN AVENUE

WESTERN AVENUE

ONTA

RIO

STRE

ETON

TARI

O ST

REET

OLEA

RY B

OULE

VARD

To: Downtown Campus - 0.5 Miles

To: Uptown Campus - 2.3 Miles

STATE STREETSTATE STREET

SaylesStudentParking

A L U M N I C O U R T Y A R D

Student Permit Required24 Hours - Everyday

Faculty/Staff Permit Required8:00AM-4:00PM

St. Rose Permit Required8:00AM-4:00PM

Special Permit Required24 Hours - Everyday

Zip Car Parking24 Hours - Everyday

University Handicap Permit Required

Official University

Special Dock Permit Required

Pedestrian Path - Paved

Bus Stop

Emergency Bluelight Phone

Residential Buildings

Other University Buildings

PA R K I N G , T R A N S P O RTAT I O N A N D P E D E S T R I A N WA L K WAY L E G E N D

WaterburyHall

SaylesHall

BrubacherHall

(College of Saint Rose)

PierceHall

AldenHall

MAP REVISION: DECEMBER 2014

E X T E R I O R M A S T E R M A P S

Page 10: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 0N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : M A P SRevised 7/2/15Map Revision: February 2016

Schu

yler

Bui

ldin

g(F

utur

e Hom

e of t

he Co

llege

of En

gine

erin

g an

d Ap

plie

d Sc

ienc

es)

E X T E R I O R M A S T E R M A P S

Page 11: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 1N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : M A P SRevised 7/2/15

UNIVERSITY PLACE

COLUMBIA TURNPIKE U.S. ROUTES 9 & 20 To: East Greenbush

DISCOVERY DRIVE

CARPINELLO ROAD

Regeneron

Regeneron

Pharmaceuticals

StudentParking

VisitorParking

VisitorParking

VisitorParking

VisitorParkingEdward S. & Frances

Gilda George Education Center

Cancer Research Building

LaboratoryBuilding

Bruno Biotech DevelopmentCenter

C wing

A wing

B wing

DB wing D wing

TaconicBiotechnology

EnergyPlant

MAP REVISION: DECEMBER 2014

Visitor Parking8:00AM-8:00PM Monday-FridayVisitors must park in visitor parking orat metered parking spaces

Student Permit Required24 Hours - Everyday

Special Dock Permit Required

University Handicap Permit Required

Pedestrian Path - Paved

Bus Stop

Emergency Bluelight Phone

Academic, Athletics, and Library Buildings

Other University Buildings

PA R K I N G , T R A N S P O RTAT I O N A N D P E D E S T R I A N WA L K WAY L E G E N D

E X T E R I O R M A S T E R M A P S

Page 12: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

B A N N E R S

WhitePantone 138c Pantone 269c

TB - BannersScale: 1/2"=1'-0"Custom two-sided banner sets

Banner Material: Sunbrella Awning Fabric or equalGraphics: Silk-screened to match various colorsAttachment Hardware: Kalamazoo Banner Works Bannerflex or equal

Truth

Hal

l

Banners can be mounted to the Podium columns, light poles (if wind load allows), building facades, or individual banner poles*.

* If individual banner poles are specified, they should be painted white.

Area is also available for building, quad or area names. Copy to be cut-out vinyl or silk-screened; font DIN Schrift Engschrift; copy height should be consistent within group, area, or quad based on the longest name (starting with 9" cap height as standard).

FEEL

TB-11

TB-10

THEATERMUSICDANCE

TB-9TB-8

TB-7

TB-6

TB-5

25"

CL

Truth

Hal

l

TB-49"

5"

The BigPurpleGrowl

April 4- April 11

TB-3

North

rup 5

Hall

TB-2

9"

9"

CL

The BigPurpleGrowl

April 4- April 11

2'-6"

6'-0"

TB-1

25"

1'-0"

5"

CL

Area is available for changeable messages.Changeable messagesto be cut-out vinyl or silk-screened.

Font:

Trajan Boldor

DIN Schrift Engschriftscale to maximize cap height

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 2N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SRevised 8/21/14

B A N N E R S

SIGN TYPE: TB-1 — TB-8

FUNCTION: IDENTIFICATION, LANDMARK, EVENT

PRODUCT: BANNER

CAMPUS: ANYThese fabric banners can be pole-mounted or building-mounted. They should be silk-screened or digitally printed to match University colors. They can be used for two different purposes:Landmarking BannersWhen heavily massed in a concentrated area, and inten-tionally designed for long-distance viewing by using strong colors and simple shapes, large banners create effective landmarks. This can be effectively applied around a reduced Collins Circle Drive; along the south side of Washington Avenue; flanking the Collins Circle Drive entry for a distance of 100 feet in each direction, and similarly at the north side of the Western Avenue entrance; and at the south end of the Podium.Identity BannersThese banners support the UAlbany identity. Additional special event and special message identity banner pro-grams may be implemented to help enliven the campuses. Additional examples of this approach would be custom ban-ner designs for UAlbany Athletics, performance events, ori-entation, commencement exercises and academic programs of note.These banners can also be used to identify destinations such as residence halls in place of ground or wall-mounted identifiers.Whether used as landmarking or identity devices, banners can help to delineate campus boundaries, celebrate a per-son’s arrival at the campuses, and reinforce the UAlbany brand.GuidelinesWhenever possible the size guidelines specified in the man-ual must be followed. If efforts to fit within these guidelines are deemed unsuccessful by the project team and there are special/unique needs, then either the length and/or width may be adjusted. For example this may be the case if one needed to “fit” a banner between two existing columns, or to view a banner over a long distance, or to communicate a large amount of information.One of our concerns is that there are standardized banner support infrastructures in place across the University. To avoid various additional expenses and coordination associ-ated with the proliferation of varying sizes, banner sizes must be standardized and limited to as few as possible. The standard banner shown in the manual is intended for exterior application and typically when installed hangs down to a height of 14’-0”. Generally, the bottom of banner intended for permanent or extended use should be hung no lower than 14’-0” to avoid vandalism. Banners intended for short term use or where vandalism is not a concern such as a one day event, may be hung lower with ample allowances for pedestrian and vehicular access below where applicable. Also, please note that in-house equipment height/reach for hanging banners off the Podium deck is limited to 20’/0’, and for hanging banners off the ground is limited to 50’/30’.Given are the guidelines of the signage manual and the names of the following places/groups: the “Performance Arts Center”, the “University Museum” and the “University Library”. The intent is to work in conjunction with representa-tives from each of these groups, to come up with a banner design to address the special needs of these places/groups on campus. The changeable zones of TB-1 to TB-4 are intended to accommodate any special 2-D graphic needs of the places/groups be they artwork, color, text, etc. You are being asked to take a first stab at coming up with ideas or a framework that can then be used to initiate and help direct the discourse with the representatives to arrive at an accept-able design solution. Additionally, unlike the PAC and the Museum which are actual clients, the library is intended as a design prototype that can be adapted for any academic unit/group on campus that might request a banner in the future.

Page 13: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 3N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G D O N O R I D E N T I F I E R - L E T T E R S

GoldMetallic

EDWARD S. & FRANCES GILDEAGEORGE EDUCATION CENTER

EDWARD S. & FRANCES GILDEAGEORGE EDUCATION CENTER

1/2" thick aluminum letters painted to match gold metallic, satin finish, pin-mounted 3/8" from building facade; font DIN Schrift Engschrift; open spacing equal to 150% ÒIÓ center width.

8" cap height is the recommended standard but the letter height and sign location should be evaluated according to the space available.

Exterior building facade will vary; site verify each location

CD-1 - Building Donor Identifier - Letters: Exterior Scale: 1/2" = 1'

x

200% x

x

Alternate ÒIÓ Letterform1" = 1 foot

CL

CL

~8"

12"

SIGN TYPE: CD-1

FUNCTION: IDENTIFICATION / DONOR

PRODUCT: CUSTOM

CAMPUS: ANY

These fabricated aluminum letters are used to identify buildings made possible through targeted donations and to give credit to the donors. The 1/2-inch-thick letters are painted gold and pin-mounted 3/8 of an inch off the building façade, with the bottom of the letters aligned with the building mortar. Letter dimen-sions and location are determined according to the space available. To optimize legibility, there should be a maximum of two lines of copy with a maximum of 30 letters each line (counting spaces). The DIN Schrift Engschrift typeface is used.

Adapting this design for applica-tion to Podium-type buildings would require the use of mounting brack-ets and rails like those used with the Building Identifier Letter sign types (IB-1 and IB-2) on pages 2:11 and 2:12. Letter spacing would be as shown here, without regard to column spacing, rather than the between-column letter spacing used with the larger IB-1 and IB-2 sign types.

Page 14: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 4N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G D O N O R I D E N T I F I E R - P L A Q U E

MP41306SPSignal Jet Black

MP21249Gold Metallic

2'-0"

5'-0"

C

5'-0"

C

1'-2"

Podiumcolumn

1'-4"

CD-2a - Building Donor Identifier - PlaqueScale: 1"=1'-0"

Note: This sign type should not be used on Podium-type buildings. Use the CD-2b.

CD-2b - Building Donor Identifier - PlaqueScale: 1"=1'-0"

Note: This sign type was designed specifically for Podium-type buildings to be located on a columnset out in front of the building or on a column that is integrated into the building's facade. It can also be used on other buildings where space is limited.

1" CH

4'-0"

2'-10"

University logo to be laser etched and infilled black

Building facade will vary; site verify.

Custom copy (shown for graphicrepresentation only) to be laser etched and infilled with 41306SP Signal Jet Black matte; font AdobeGaramond Italic

Custom copy (shown for graphicrepresentation only) to be laser etched and infilled with 41306SP Signal Jet Black matte; font Trajan Boldin small caps

2" CH

2 1/2"

1/4" thick aluminum panel with face and sides painted gold metallic; pin mounted 1/4" away from concrete column orbuilding facade (site verify each location).

Maintain 1/2" margin around panel

1 1/2"1 1/4"7/8"

4"

2"8"

2 1/2"

CC

1/4" thick aluminum panel with face and sides painted gold metallic; pin mounted 1/4" away from building facade; align with building mortar/architecture if possible. 1'-2"

2'-0"

SIGN TYPE: CD-2 (a & b)

FUNCTION: DONOR

PRODUCT: CUSTOM

CAMPUS: ANY

These 1/4-inch-thick bronze plaques are used to identify buildings made possible through targeted donations and to give credit to the donors. They can be used in locations where the use of larger fabricated aluminum letters is impractical, or in situations where a plaque is more appropriate. The smaller CD-2b ver-sion of this sign type can be used on the Uptown campus Podium-type architecture, secured to the concrete columns. (The CD-2a should not be used on Podium-type buildings.)

The sign type uses a laser etched University logo and text with the infill painted black. The Trajan Bold type-face is used for the facility or des-tination name, in small caps at 85 percent of the size of the initial letter of each word. Adobe Garamond Italic is used for the dedication mes-sage and donor names.

Page 15: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 5N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SRevised 12/8/14

B U I L D I N G E N T R A N C E S I G N S & E N T R A N C E P L A Q U E S ( A D A )

SIGN TYPE: RE-1 — RE-4

FUNCTION: WAYFINDING / INFORMATION

PRODUCT: CUSTOM

CAMPUS: ANY

These sign types are used where required by the Americans with Disabilities Act to indicate handi-capped-accessible entrances, and to direct people to accessible entranc-es from non-accessible ones. If any of the entrances into a building are not accessible, then these sign types (whether directional or identifier) are required at all of the building’s entrances as appropriate. If all of the entrances are accessible, then no accessibility signage is required at any of the entrances.

The vinyl Entrance Signs (RE-1 and RE-2) are simply white vinyl applied to a glass door surface and centered horizontally. Text is in the DIN Schrift Engschrift typeface.

The Entrance Plaques (RE-3 and RE-4) are custom painted alumi-num panel signs with silk-screened graphics. Text is in the DIN Schrift Engschrift typeface.

Where possible, the vinyl sign types should be used. The Entrance Plaque sign types can be used in locations that do not support the use of vinyl.

Opaque MatteWhite Vinyl

Paint to MatchAvery Intense Blue

60" tosign's center

RE-1 - ADA Entrance Directional Sign, vinyl on glass (Directional) Scale: 3"=1'-0"White vinyl letter forms and graphics, font DIN Schrift Engschrift;apply to second surface of door/window; center horizontally;arrow rotates to indicate direction of accessible entrance.

To Accessible Entrance

To Accessible Entrance

4"

To Accessible Entrance

Accessible Entrance

1'-9 1/2"

7"

2"CH

RE-2 - ADA Entrance Sign, vinyl on glass (Identifier) Scale: 3"=1'-0"

White vinyl graphicsapplied to second surface of glass door/window; center horizontally;denotes accessible entrance.

Gold Metallic 41306SPSignal Jet Black

4"

4"

1"

1"

RE-3 - ADA Entrance Directional Plaque, (Alternative Directional) Scale: 3"=1'-0"

1'-0"

Header painted Gold Metallic

1/2" rule paintedGold Metallic

Silk-screened graphicspainted to match MPSignal Jet Black and AveryIntense Blue; font DINSchrift Engschrift

.080 aluminum panel painted white with silk-screened graphics

Arrow changes basedon the direction of the nearestaccessible entrance

9"

2 1/2"

6"

1/2"

1 3/4"

CL

1"

1"

Logo painted MP Signal Jet Black; whitesilk-screened graphics

RE-4 - ADA Entrance Plaque, (Alternative Identifier) Scale: 3"=1'-0"

3"

3"

=

=

=

=

=

=

2 7/8"

Page 16: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 6N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E MRevised 9/21/11

DETAIL #1 (S1)SIDE VIEW SECTIONLetterform Rail Assembly2" = 1 foot

Gold Metallic

A R T S & S C I E N C E SA R T S & S C I E N C E S

3/4

" G

old 2"

Gray

2 3/4"return

CL Rails to Letter

Build

ing R

ib

.125" aluminumletter face(beyond)

.125" (th.) 3" aluminumC-channel outer letter rail

.125" (th.) 2 3/4" aluminumC-channel inner mounting rail

.080" aluminumletter return

(beyond)

Each sign location should be field measured. The inner mounting rail is installed into position using stainless steel Hilti expansion anchors. The letter/rail assembly overlaps the inner mounting rail and is joined using stainless steel countersunk screws on the top and bottom (and painted Dark Gray). Recommend that the inner mounting rail be attached into every other rib. However, for each sign, further development and engineering is expected to be shown in the fabricator's shop drawings.

51" 24"

DETAIL #2TOP VIEW OF LETTERFORM RAIL ASSEMBLY1" = 1 foot

FRONT VIEWAlternate “I” Letterform1" = 1 foot

DETAIL #3COLUMN ISOMETRICNot to scale.

2X

X

CL

X

IB-1 - Building Identifier - 24" Letters Scale: varies

MP03730Dark Gray

Font DIN Schrift Engschriftwith alternate “I”

Stainless steel bird deterrent spikes are mounted to the back of the installed outer rail between the letters; painted dark gray or the color of the building; Nixalite model H or equal (www.nixalite.com)

Building facade concrete rib

Building facade

Uptown Campus:Center the sign assembly between the horizontal mullions (if the letters cannot be centered between two columns, flank a column as shown).

Design intent: Individual dimensional letters are integrated into an outer letter rail, which is then attached to an inner mounting rail that is installed to the building facade. The placement of the letters on the outer letter rail and the inner mounting rail on the building strictly observe the modularity of the facade.

The end caps of the C-channel rails should be flush with the end of the cast concrete rib and painted Dark Gray.

Building facade concrete rib

Building facade

Cast concrete rib; all are basically identical

Two .125 (th.) aluminum C-channel rails with end caps; length determined by field measurement; painted Dark Gray; letters are routed into outer letter rail and welded smooth; see section detail S1.

24" fabricated aluminum channel letters, all enclosed (front, back and sides), not illuminated; .125" (th.) aluminum face, .080" aluminum returns and back; font DIN Schrift Engschrift; aligned vertically on outer letter rail so the E's center stroke is centered on rail, aligned horizontally by modifying the letter spacing so each letter is centered between the concrete ribs; letter is routed out and inset into outer letter rail (maintain letter structure and alignment); letter is welded to outer letter rail and finished smooth; face and 3/4" of the return is painted Gold Metallic, the remaining 2" of the return and the back is painted Dark Gray.

S1

24"

B U I L D I N G I D E N T I F I E R - 2 4 ” L E T T E R S

SIGN TYPE: IB-1

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: ANY

Building Identification Letters are a series of letters that are applied to buildings, either through attachment to a rail assembly as shown or as individual pin-mounted letters. In the case of the Podium on the Uptown Campus, one letter would be applied between each of the vertical mullion elements in locations appropriate to support wayfinding, in most cases on all four sides of a given building.

Typically, the 24-inch letters are used on the Uptown Campus to identify an entire building or group of buildings, and should be placed in the space between the second and third floors. The 24-inch letters can also be used in other locations on any campus where the large scale of the architecture and longer sight lines warrant their use.

For placement guidelines, see the Building Identifier Elevation Reference Drawings in Section 4: Phasing and Implementation Plan.

Page 17: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 7N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G I D E N T I F I E R - 1 5 ” L E T T E R S

Gold Metallic MP03730Dark Gray

L I B R A R YL I B R A R Y

DETAIL #1 (S1)SIDE VIEW SECTIONLetterform Rail Assembly2" = 1 foot

FRONT VIEWAlternate "I” Letterform1" = 1 foot

X

2X

15"

X

3/4

" G

old 2"

Gray

2 3/4"return

Build

ing R

ib

.125" aluminumletter face(beyond)

.125" (th.) 2" aluminumC-channel letter rail

.125" (th.) 1 3/4" aluminumC-channel mounting rail

.080" aluminumletter return

(beyond)

CL Rails to Letter

Each sign location should be field measured. The inner mounting rail is installed into position using stainless steel Hilti expansion anchors. The letter/rail assembly overlaps the inner mounting rail and is joined using stainless steel countersunk screws on the top and bottom (and painted Dark Gray). Recommend that the inner mounting rail be attached into every other rib. However, for each sign, further development and engineering is expected to be shown in the fabricator's shop drawings.

Font DIN Schrift Engschriftwith alternate "I”

~27" 15"

DETAIL #2TOP VIEW OF LETTERFORM RAIL ASSEMBLY1" = 1 foot

Cast concrete rib; all are basically identical

The end caps of the C-channel rails should be flush with the end of the cast concrete rib and painted Dark Gray.

Building facade concrete rib

Building facade

Building facade concrete rib

Building facade

Two .125 (th.) aluminum C-channel rails with end caps; length determined by field measurement; painted Dark Gray; letters are routed into outer letter rail and welded smooth; see section detail S1.

DETAIL #3BUILDING RIB ISOMETRIC Not to scale.

CL

CL

CL

15" fabricated aluminum channel letters, all enclosed (front, back and sides), not illuminated; .125" (th.) aluminum face, .080" aluminum returns and back; font DIN Schrift Engschrift; aligned vertically on outer letter rail so the E's center stroke is centered on rail, aligned horizontally by modifying the letter spacing so each letter is centered between the concrete ribs; letter is routed out and inset into outer letter rail (maintain letter structure and alignment); letter is welded to outer letter rail and finished smooth; face and 3/4" of the return is painted Gold Metallic, the remaining 2" of the return and the back is painted Dark Gray.

Stainless steel bird deterrent spikes are mounted to the back of the installed rail between the letters; painted Dark Gray or the color of the building; Nixalite model H or equal (www.nixalite.com)

IB-2 - Building Identifier - 15" Letters Scale: varies

S1

Uptown Campus:Center the sign assembly above the entrance doors and between the horizontal mullions as shown (if the letters cannot be centered due to the ribs, favor the left side.

Design intent: Individual dimensional letters are integrated into an outer letter rail, which is then attached to an inner mounting rail that is installed to the building facade. The placement of the letters on the outer letter rail and the inner mounting rail on the building strictly observe the modularity of the facade.

SIGN TYPE: IB-2

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: ANY

Building Identification Letters are a series of letters that are applied to buildings, either through attachment to a rail assembly as shown or as individual pin-mounted letters. In the case of the Podium on the Uptown Campus, one letter would be applied between each of the vertical mullion elements in locations appropriate to support wayfinding.

On the Uptown Campus, the 15-inch letters typically identify more public buildings on the Podium (Performing Arts Center, Library) and major inte-rior destinations within the Podium buildings (Art Museum). They are placed just above the primary entrance to reinforce the points of entry.

These letters can also be used on any campus in locations where the smaller scale of the architecture and shorter sight lines warrant their use.

For placement guidelines, see the Building Identifier Elevation Reference Drawings in Section 4: Phasing and Implementation Plan.

Page 18: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 8N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G I D E N T I F I E R - G R O U N D ( U P T O W N C A M P U S )

Gold Metallic Bethel WhiteGranite veneer

MP04761Steel Wool

WhiteMP41306SPSignal Jet Black

Painted Aluminumto match granite

TOP VIEW

SIDE VIEW

110-120 VAC

Hydrel 6100Series In-gradeup-light for eachsign face, controlled by a time clock orphoto-electric switch.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

Life SciencesResearch

Life SciencesResearch

6"

6'-7"

9'-3"

Fabricated aluminumcurved cap andcolumn cap paintedto match granite

Fabricated aluminumcurved cap paintedto match granite

Granite

Granite

Recessed panelscentered in column base

1/4" aluminum letterspainted MP Signal Jet Black;returns painted black;pin mounted flush, TrajanBold font

Aluminum square cross-section bars painted MPGold MetallicPin Mounted Flush.

1 1/4” granite veneer

Logo etched into granite;infill painted MP Steel Wool;uppermost surfacepainted white

Sign can be single- or double-sided.If sign is double-sided,logo and copy appear on opposite face in same manner.If single-sided, the granite sign face is blank.

2'-0" 10 1/2"

4 1/2"

1 3/4"

1"

9"

1"

1/2"1/2"1" 1"

7'-1/2"

1"1"

10'-1/2"

1'-5" 1'-5"

1"

1/2"1/2"

C

IB-3 - Building Identifier - Ground (Uptown) Scale: 1/2"=1'-0"

3'-5"

4'-6"

1'-0"

11"

3 1/2"

Below-grade footing per code;pad per Universityspecifications

10 1/4"

2'-0"

3'-1/2"

Above-grade apron to drainwater from sign base

SIGN TYPE: IB-3

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: UPTOWN

Ground-Mounted Building Identifiers are placed in high-visibility areas to mark the location of key buildings and departments. The signs can be either single- or double-sided. This version of the sign type uses paint-ed, pin-mounted aluminum letters and an engraved University logo on a granite veneer monument with a fabricated aluminum cap painted to match the granite. Aluminum accent bars on the pillars are painted gold. The infill of the logo is recessed and painted gray and the logo itself is painted white. Text is in the Trajan Bold typeface. Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required to illuminate the signs in low-light conditions. Illumination light levels should typically fall between 15 and 25 footcandles. A time clock or pho-to-electric switch to control the light should be discreetly, but functionally, located.

Page 19: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 1 9N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G I D E N T I F I E R - G R O U N D ( D O W N T O W N C A M P U S )

Painted Aluminumto match limestone

Match toPantone 403

WhiteMP41306SPSignal Jet Black

Limestone

DRAPERHALL

DRAPERHALL

Milne HallPage hall

RICHARDSON HALL

Milne HallPage hall

RICHARDSON HALL

5"3 1/2"

110-120 VAC

6'-7"

10'-2"

Fabricated aluminumcurved cap paintedto match limestone

Logo engraved/recessed into limestone;infill painted to match Pantone 403;uppermost surface painted whiteC

IB-4 - Building Identifier - Ground (Downtown) Scale: 1/2"=1'-0"

Limestone veneer

4'-6"

3'-6 7/8"

11"

1"

2 1/2"

5"

11"

2 1/2"

1'-1"

2 1/2"

2 1/2"

2 1/2"

2 1/2"

1'-7"

1'-9 1/4

9 1/8"

11"

6"

Red brick columns to match same brick as on existingcampus buildings

Limestone column base

Custom signwith 2” limestoneveneer and fabricatedaluminum curved fillercap.

ISOMETRIC VIEW - Not to scale ALTERNATIVE - for multiple buildings

10 1/2"1'-1"

Below-grade footing per code;pad per Universityspecifications

SIDE VIEW

8"

2" 2"4"

10 1/2"

1"

3 1/2"

1'-7" 1/4" aluminum letterspainted MP Signal Jet Black;returns painted black;pin mounted flush, TrajanBold font

Sign can be single- or double-sided.If sign is double-sided, logo and copy appear on opposite face in same manner.If single-sided, the back of the sign is blank.

2'-0"

3'-1/2"

1'-7"

Hydrel 6100 SeriesIn-grade up-lightfor each sign face,controlled by atime clock orphoto-electric switch.

Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

SIGN TYPE: IB-4

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: DOWNTOWN

Ground-Mounted Building Identifiers are placed in high-visibility areas to mark the location of key buildings and departments. The signs can be either single- or double-sided. This version of the sign type uses paint-ed, pin-mounted aluminum letters and an engraved University logo on a limestone veneer monument with a fabricated aluminum cap painted to match the limestone. Red brick columns on either side of the sign match the brick of surrounding cam-pus buildings. The infill of the logo is recessed and painted gray and the logo itself is painted white. Text is in the Trajan Bold typeface.

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required to illuminate the signs in low-light conditions. Illumination light levels should typically fall between 15 and 25 footcandles. A time clock or pho-to-electric switch to control the light should be discreetly, but functionally, located.

.

Page 20: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 0N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G I D E N T I F I E R - G R O U N D ( E A S T C A M P U S )

Bethel WhiteGranite veneer

MP04761Steel Wool

White/White Marble

MP41306SPSignal Jet Black

Silver Metallic orStainless Steel

CANCERRESEARCH

CENTER

CANCERRESEARCH

CENTER

2'-0"

3'-5"

6'-7"

6"

9'-2"

7'-0"1'-0" 1'-0"

11"

CL

1'-0"

1"

1"

9'-2"

TOP VIEW

SIDE VIEW

Below-grade footing per code;pad per Universityspecifications

3 1/2"

1"1" 1"

Logo engraved onto marble;infill Steel Wool

1/2” thick BethelWhite granite veneer base

Hydrel 6100SeriesIn-grade up-lightfor each sign face,controlled by atime clock orphoto-electric switch.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical andinstallationspecifications.

110-120 VAC

Aluminum radius curved columnspainted white

Aluminum square cross-section bars painted silvermetallic that wrap curved columns

1/4" aluminum letterspainted MP Signal Jet Black;returns painted black;pin mounted flush, TrajanBold font

Fabricatedaluminumcurved cappainted white

Fabricatedaluminum columncap painted white

Sign can be single- or double-sided.If sign is double-sided,logo and copy appear on opposite face in same manner.If single-sided, the marble sign face is blank.

4 7/8"

4 1/2"

1"

1"

1'-0"

1'-2"

6'-7"

IB-5 - Building Identifier - Ground (East) Scale: 1/2"=1'-0"

2'-0"

3'-1/2" Custom sign with 1/2" thick white marble veneer

SIGN TYPE: IB-5

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: EAST

Ground-Mounted Building Identifiers are placed in high-visibility areas to mark the location of key buildings and departments. The signs can be either single- or double-sided.

This Building Identifier is used on the East Campus and is designed to reflect the architecture of the new Cancer Research Center building.

The sign incorporates a white mar-ble veneer sign face and fabricated curved aluminum columns painted white and wrapped in silver metallic accent bars, atop a granite base. It uses pin-mounted aluminum letters painted black to spell out the build-ing name, and an engraved, infilled University logo.

All text is in the Trajan Bold type-face.

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required to illuminate the signs in low-light conditions. Illumination light levels should typically fall between 15 and 25 footcandles. A time clock or pho-to-electric switch to control the light should be discreetly, but functionally, located.

Page 21: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 1N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G I D E N T I F I E R - W A L L

TOP VIEW

SIDE VIEW

ISOMETRIC VIEWnot to scale

Gold Metallic WhiteMP41306SPSignal Jet Black

waterburyHall

IB-6 - Building Identifier - Wall-mounted Scale: 1"=1'-0"

C

C

2'-4"

1'-8"

2"Removable/changeablealuminum panel allows for future updating

Black silk-screenedletters, Trajan Boldfont

Header and footerto be paintedMP Gold Metallic

Icon silk-screened MP Signal Jet Black and white

Removable/changeablealuminum signpanel painted white;pin-mounted flushto building wall

Align top of sign to the top of the door

12"

6"

1'-1"

1"

3 3/4"

3 3/8"

2" CH

SIGN TYPE: IB-6

FUNCTION: IDENTIFICATION

PRODUCT: APCO / CUSTOM

CAMPUS: ANY

This two-inch-deep painted alu-minum panel sign is used to iden-tify ancillary buildings and primary departments that are not located in the Podium. Locations on the Alumni Quad would be appropriate, for example.

The sign is pin-mounted flush to the wall and uses a removable aluminum panel to allow for future updating. The building or department title is silk-screened in the Trajan Bold typeface on the panel, and the University logo is silk-screened onto the header.

Page 22: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 2N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G I D E N T I F I E R - V I N Y L

RacC

RacC

Building name;Trajan Bold font.

C

White vinyl letterforms and graphics; applied to window's second surface.

OpaqueWhite Vinyl

IB-7 - Building Identifier - vinyl on glass Scale: 1-1/2"=1'-0"

60"

1/2"

2'-6"

3"

2 1/4"

2 7/8"

2 3/8"

SIGN TYPE: IB-7

FUNCTION: IDENTIFICATION

PRODUCT: VINYL

CAMPUS: ANY

Used in addition to other build-ing identification signs, white vinyl graphics and letters applied to glass can identify additional entrances to buildings and major departments within a building, particularly in locations where a wall-mounted identifier is impractical. They can also be used to identify secondary destinations that do not warrant a wall-mounted building identifier due to their limited relevance to the pub-lic. This approach may not be appro-priate on Podium-type buildings because of their narrow windows.

The Trajan Bold typeface is used for the building and/or department title.

Page 23: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 3N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

Existing BuildingConcrete

Painted Aluminum LettersTwo-Part Epoxy Black

IB-8 - Quad Identifier (Uptown) Scale: 1/4"=1'-0"

Alternate “I” Letterform1/2" = 1 foot

2X

X

X

Font DIN Schrift Engschriftwith alternate “I”

36"

1/2" = 1 foot

Wall Roof

SIDE VIEW DETAIL

24"

24"

4" 2"

28-1/2"

3/8” Thunder Studs with 2” embedment into existing wall

1/2” gap allows frame to fit over wall section

1/4” thick aluminum plates welded on corners of frame

1/4” thick aluminum anglemounting brackets

Frame made of 2”x2” aluminum tubing

Tubing miter-cut at corners, V-grooved and welded

Aluminum, reverse channel letters painted black with two-part epoxy paint

Letters will have a clear 3/6” thick Lexan back with internal white LED illumination

3/8” studs connect letters to frame

T-Slotted angle brackets accomodate 1/2” gap between frame and wall

Low voltage electrical power supply

Power cable routed inside 2”x2” aluminum tubing

Backlit, reverse channel letters.

Backlighting is to be with white LED’s with a 3/16” clear Lexan plastic back.

FRONT & SIDE VIEWNIGHT

36"6'-0"

4"

Font DIN Schrift Engschrift Font DIN Schrift Engschriftalternate “I”

Letters are welded aluminum with 0.125” thick aluminum faces and 4” deep returns.

Letters are painted black with a two-part epoxy finish.

Letters to be attached to top band of buildings. Top band is about 6’ high and is located approximately 23 stories above grade.

FRONT & SIDE VIEWDAY

4"2"

TOP VIEWDAY

2”x2” aluminum tubing frame secured with 1/4” thick aluminum angle brackets attached to wall with 3/8” Thunder Studs

Low voltage electrical feed to letters to be routed through 2”x2” alumnium tube

Low voltage electrical power supply

There are to be four (4) signs on each of four (4) Quads:

Colonial, Indian, Dutch and State.

Total: Sixteen (16) signs.

B U I L D I N G I D E N T I F I E R - Q U A D

SIGN TYPE: IB-8

FUNCTION: IDENTIFICATION

PRODUCT: ALUMINUM

CAMPUS: UPTOWN

The 36 inch thick, black painted letters require 3/8 of an inch studs to connect them to the 2 inch by 2 inch aluminum tubing frame. The frame is to be attached to the top band of buildings, approximately 23 stories above grade. The DIN Schrift Engschrift typeface is used.

The low voltage electrical power supply provides backlighting to enhance the view of the letters at night. The backlighting will be done with white LED’s with a 3/16 of an inch clear Lexan plastic back. The letters will be aesthetically pleas-ing due to the halo lighting effect at night. Day or night due to the high location, the letters will help orient visitors at any point on campus.

Page 24: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 4N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

B U I L D I N G T E N A N T I D E N T I F I E R

WhiteMatch vinyl toMP41306SP Signal Jet Black

Gold Metallic

Capital Area School Development Assoc.

Center for Comparative Functional Genomics

Institute for Health and the Environment

Questar III: New Visions

Small Business Development Center

Student Loan Service Center

University at Albany Foundation

Laboratory Building

Custom capsits atopmodular postand panelsystem such asAPCO's SignBar¨

or equivalent.

Surface-applied blackvinyl letters; font DIN SchriftEngschrift

Bottom rule to bepainted Gold Metallic

Removable aluminum fabricated crown painted gold metallic

Screened black and white logocentered horizontally and verticallyin header

Black vinyl copy centered in header panel; font Trajan Bold

1'-3"

2 3/4" CH

IN - Tenant Identifier - post & panel Scale: 1/2"=1'-0"

TOP VIEW ISOMETRICVIEW

SIDE VIEW

Below-grade footingper code; pad per Universityspecifications

Standard 4" square postspainted white

6'-0"4"

4"

4"

6'-9 1/4"

APCO SignBar¨ or equal; modular aluminum sign with interlocking panels; top access for panel removal; windload engineered; adjustable; durable, non-corrosive extruded aluminum components and stainless steel hardware; vandal- resistant screws for posts and wall channel caps; painted white; five-year warranty

2'-0"

4'-10 1/2"

2"

6"

3 1/4" CH

8'-1 1/2"

10"

6'-10 1/2"

SIGN TYPE: IN

FUNCTION: IDENTIFICATION

PRODUCT: APCO / CUSTOM

CAMPUS: ANY

These signs can be used to list tenants in University facilities in situ-ations where tenants call for identi-fication outside a building as well as inside. The modular aluminum post-and-panel signs use a custom alu-minum cap painted gold, and white painted posts. The University logo is silk-screened on the cap in black and white. Changeable message panels are painted white and use surface-applied black vinyl lettering. The Trajan Bold typeface is used to identify the facility and DIN Schrift Engschrift is used to list the tenants.

Page 25: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 5N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

C A M P U S I D E N T I F I E R ( U P T O W N C A M P U S )

MP21249Gold Metallic

Painted Aluminumto match granite

MP04761Steel Wool

WhiteMP41306SPSignal Jet Black

White BethelGranite veneer

Below-grade footing per code;pad per Universityspecifications

IC-1 - Campus Identifier (Uptown) Scale: 1/2"=1'-0"

SIDE VIEW

1 4 0 0

110-120 VAC

ISOMETRIC VIEW TOP VIEW

1"

1" 1"

1'-5"

8 1/2" CH

6" CH

4 1/2" CH

Granite

GraniteEngraved recessedpanels with bevel edge

Street address etched into granite;infilled black, DIN Schriften Engschrift font

Logo engraved/recessed into granite;infill painted black;uppermost surface painted white

Fabricatedaluminumcurved capand columncap paintedto matchgranite veneer

Fabricatedaluminumcurved capand columncap paintedto matchgranite veneer

Aluminumchannel letterspainted gold metallic;1" returnspainted gold metallic;pin mounted flush

Etched letters;infilled black

Custom signwith 1/2” garniteveneer and aluminumfabricated curved fillerpanels

1 4 0 01 4 0 0

1/2"

1'-7"

1'-7"2'-5"

4'-6"

1'-10" 1'-10"

2'-8"

9'-0"

1 1/4"

1 1/4"

1 1/4"2 1/2"

2 1/2"

1 1/4"

8 3/4"

1'-1 1/4"

2'-5"

1'-4"

1'-2"

1'-4" 1'-3"

12'-10"

8'-7"

4'-11"LOGOTYPE

6"

3 1/2"

1'-4"

8 1/2"

Hydrel 6100 SeriesIn-grade up-lightfor each sign face,controlled by atime clock or photo-electric switch.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

SIGN TYPE: IC-1

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: UPTOWN

These Campus Identifiers are placed along the perimeter of the Uptown Campus — primarily at the main Washington and Western avenue entrances — to identify the campus, help define its boundaries and affirm a visitor’s arrival. The signs can be either single- or double-sided. The sign uses pin-mounted aluminum let-ters painted gold, engraved text and street numbers infilled with black, and an engraved University logo. The infill of the logo is painted black and the logo itself is painted white.

This version uses a granite veneer with a fabricated aluminum cap painted to match the veneer, and gold painted aluminum accent bars on the pillars. The granite relates visually to the architecture on the Uptown Campus. The University name is rendered in the approved University logotype dimensions, and the street numbers are in the DIN Schrift Engschrift typeface.

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required to illuminate the signs in low-light conditions. Illumination light levels should typically fall between 15 and 25 footcandles. A time clock or pho-to-electric switch to control the light should be discreetly, but functionally, located.

NOTE: Once the Balsley Plan for landmarking at Uptown Campus entrances is implemented, these Campus Identifier signs can either be moved off the campus perimeter to flank the University Drive at each entrance, or removed altogether.

Page 26: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 6N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

C A M P U S I D E N T I F I E R ( D O W N T O W N C A M P U S )

Gold Metallic Painted Aluminumto match limestone

Match toPantone 403

WhiteMP41306SPSignal Jet Black

Limestone

TOP VIEWISOMETRIC VIEW - Not to scale

SIDE VIEW

1'-9 3/4"

2 1/2"

2 1/2"

2 1/2"

2 1/2"

5"

2 1/2"

9'-0"

1'-5"

1'-6 1/2"

1"1"

1'-4 1/2"

1'-6 1/2"

1'-4 1/2"

2 1/2"

1"

1"

1'-9 1/2"

1"

Below-grade footing per code;pad per Universityspecifications

IC-2 - Campus Identifier (Downtown) Scale: 1/2"=1'-0"

Red brick columns to match same brick as on existingcampus buildings

Limestone column base

Limestone column cap

Logo engraved/recessed into limestone;infill painted black;uppermost surface painted white

Fabricatedaluminumcurved cappaintedto matchlimestone

Aluminumchannel letterspainted gold metallic;1" returnspainted gold metallic,pin mounted flush

Etched letters;infilled black

Custom signwith 2” limestoneveneer and fabricated aluminum curved fillercap

Limestone veneer

2'-5"

8 1/2" CH

6" CH

4 1/2" CH

1"

8'-7"

4'-11"LOGOTYPE

8 1/2"

2" 2"1'-1/2"

2'-3 3/4"

1'-6 1/4"

1'-3 1/4"

2'-0"

13'-1/2"

6'-1"

1'-8 3/4"

1'-9 1/2"

1'-11 1/4" 1'-11 1/4"

110-120 VAC

Hydrel 6100 SeriesIn-grade up-lightfor each sign face,controlled by atime clock or photo-electric switch.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

SIGN TYPE: IC-2

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: DOWNTOWN

These Campus Identifiers are placed along the perimeter of the Downtown Campus to identify the campus, help define its boundaries and affirm a visitor’s arrival. The signs can be either single- or double-sided. The sign uses pin-mounted aluminum let-ters painted gold and engraved text infilled with black, and an engraved University logo. The infill of the logo is painted black and the logo itself is painted white.

This version uses a limestone veneer with a fabricated aluminum cap painted to match the veneer, and red brick pillars that match the brick used on surrounding buildings. The limestone and brick relate visu-ally to the dominant architecture on the campus. The University name is rendered in the approved University logotype dimensions.

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required to illuminate the signs in low-light conditions. Illumination light levels should typically fall between 15 and 25 footcandles. A time clock or pho-to-electric switch to control the light should be discreetly, but functionally, located.

Page 27: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 7N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

C A M P U S I D E N T I F I E R ( E A S T C A M P U S )

110-120 VAC

1'-4" 1'-4"9'-0"

11'-10"

4'-6"

2'-5"

1"

8'-7"

4'-11"LOGOTYPE

Logo engraved or screened onto marble or aluminum; color blackuppermost surface painted white (or is white marble)

Aluminumchannel letterspainted gold metallic;1" returnspainted gold metallic;pin mounted flush

Etched letters;infilled black

Silver metallic accentbars that wrap whitefabricated curved columns

Fabricatedaluminumcurved cappainted white

TOP VIEW

SIDE VIEW

MP21249Gold Metallic

Silver Metallic MP04761Steel Wool

White/White Marble

MP41306SPSignal Jet Black

White BethelGranite veneer

IC-3 - Campus Identifier (East) Scale: 1/2"=1'-0"

Fabricatedaluminum columncap painted white

Sign can be single- or double-sided.If sign is double-sided, logo appears on opposite face in same manner.If single-sided, the marble sign face is blank.1"

1"

1"

6'-1"

7 3/8"

7 3/8"

6 1/4"

6 1/4"

1'-4"

1'-6"

8 1/2"

Below-grade footing per code;pad per Universityspecifications

1/2" Bethel White granite veneer base

CL

Hydrel 6100Series In-gradeup-light for eachsign face, controlledby a time clock orphoto-electric switch.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

Custom sign with 2" white Cherokeemarble veneer

SIGN TYPE: IC-3

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: EAST

These Campus Identifiers can be used on the East Campus to identify the campus, help define its bound-aries and affirm a visitor’s arrival. The signs can be either single- or double-sided.. They were designed to reflect the architecture of the new Cancer Research Center building.

The sign incorporates a white mar-ble veneer sign face and fabricated curved aluminum columns painted white and wrapped in silver metallic accent bars, atop a granite base. It uses pin-mounted aluminum letters painted gold for the university name, etched and infilled or dimensional letters to spell out “State University of New York,” and an engraved or silk-screened University logo. If engraved, the infill of the logo is painted gray and the logo itself is painted white (or is white marble).

The University name is rendered in the approved University logotype dimensions.

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required to illuminate the signs in low-light conditions. Illumination light levels should typically fall between 15 and 25 footcandles. A time clock or pho-to-electric switch to control the light should be discreetly, but functionally, located.

Page 28: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 8N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

C A M P U S I D E N T I F I E R ( E X I S T I N G U P T O W N C A M P U S )

Gold Metallic Bethel WhiteGranite veneer

Painted Aluminumto match granite

MP41306SPSignal Jet Black

1 1/4"4"

110-120 VAC

Hydrel 6100 SeriesIn-grade up-lightfor each sign face,controlled by atime clock orphoto-electric switch.Consultmanufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

1'-6"

Gold face

Black return

2"2'-0"

1/2"

R 10 1/4"

1'-6"

1'-7 1/2"

1 1/4"

4"

1 1/4"

1 1/4"

4"

9 1/2"

IC-4 - Existing Campus Identifier/Boundary Marker (reface) Scale: 1/4"=1'-0"

GranitePanels

ExistingConcrete

Foundation

FabricatedAluminum

ISOMETRIC RENDERING AND EXPLODED VIEW SIDE VIEW,DIMENSIONALLETTER1" = 1 foot

SIDE VIEW,COLUMN DETAIL

1" = 1 foot

TOP VIEW

33'-6"

4'-10"

7'-0"

2'-2"

Existing concretefoundation (shown in magenta lines)

Existing granite facing(shown in dotted magenta line)

New whitegranite facing

Aluminum squarecross-section bars paintedMP Gold Metallic

Approximate 1/4"joint locations

White granite faceand return panel

Fabricated aluminumcurved cap and columncap painted to matchgranite

Aluminum channel letterspainted MP Gold Metallic; 2" returns painted black; pin mounted flush

Engraved letters;infilled black

Fabricated aluminumcurved cap and columncap painted tomatch granite

Whitegranite

Whitegranite

30'-3"

Side view

2'-0"

5 1

/2"

1"

1'-1"

18 1/2" high letters 13 1/2" 26 1/2" 18 1/2" high letters

1'-11 1/2"

1"

CL

1'-6"

3'-0"

SIDE VIEW

8 5/8"

4"

SIGN TYPE: IC-4

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: UPTOWN

This design is based on refacing the front face of the existing Uptown Campus identification sign located at the corner of Washington Avenue and Fuller Road. It helps to define the campus boundaries and let visi-tors know that they have arrived.

The sign uses a white granite veneer and fabricated aluminum and engraved letters with the engraved text infilled black. Gold painted alu-minum accents are used on the side pillars. A fabricated aluminum curved cap and column caps are painted to match the granite. The veneer relates visually to the architecture on the Uptown Campus. Text is in the Trajan Bold typeface.

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required to illuminate the signs in low-light conditions. Illumination light levels should typically fall between 15 and 25 footcandles. A time clock or pho-to-electric switch to control the light should be discreetly, but functionally, located.

Page 29: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 2 9N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SRevised 9/23/14

P A R K I N G I D E N T I F I E R - P Y L O N ( U P T O W N / E A S T C A M P U S E S )

A8080-0Matte Black vinyl

White A7818-RDark Red reflective

Gold Metallic Painted Aluminumto match Avonitesimulated granite

Avonite Simulatedgranite veneer

MP04761Steel Wool

Light BlueReflective Vinyl

Outdoor CourtsPhysical EducationPoolPractice & Sport Fields

R.A.C.C.Roller Hockey RinkThe BubbleOutdoor Courts

Anthony HallCooper HallEastman TowerFulton HallIrving Hall

Melville HallSteinmetz HallTappan HallWhitman HallAnthony

Beverwyck HallBleeker HallRykman HallSchuyler HallStuyvesant Tower

Ten Broeck HallTen Eyck HallVan Cortlandt HallVan Rensselaer HallBeverwyck Hall

H O U R S & R A T E SMonday-Friday 8AM-MidnightThe first 15 minutes are free

$1 first hour - 50¢ each add'l hourMaximum $3.50/day

$2 flat fee after 6PM - $1/after 8PMTax included. Vehicles left past midnight may be ticketed/towed.

P E R M I T R E Q U I R E DP E R M I T R E Q U I R E DP E R M I T R E Q U I R E D

P E R M I T R E Q U I R E DP E R M I T R E Q U I R E DP E R M I T R E Q U I R E D

P E R M I T R E Q U I R E D

Clinton HallDelancey HallHamilton HallJohnson Hall

Livingston TowerMorris HallPaine HallZenger HallClinton Hall

Adirondack HallCayuga HallMahican HallMontauk HallMohawk Tower

Oneida HallOnondaga HallSeneca HallTuscarora HallAdirondack

Lazarus Stanton Northrup Truth

1 - 7

IP1-a IP1-b IP1-c

IP1-d IP1-e IP1-f

IP1-g

IP1-1 IP1-2 IP1-3

IP1-4

IP1-7 IP1-8 IP1-9

IP1-5 IP1-6

STUDENTS

P E R M I T R E Q U I R E D

IP1-h

1'- 0"

6'-2 1/4"

3'-0"

3'-0"

5"

1'-0"

visitorparking 1H O U R S & R A T E S

Monday-Friday 8AM-MidnightThe first 15 minutes are free

$1 first hour - 50¢ each add'l hourMaximum $3.50/day

$2 flat fee after 6PM - $1/after 8PMTax included. Vehicles left past midnight may be ticketed/towed.

P E R M I T R E Q U I R E D

visitorparking 1

visitorparking 2

Colonialquad

DutchQuad

FreedomQuad

indianQuad

ATHLETICCOMPLEX

stateQuad

Logo etched into 1/2” Avonite simulatedgranite veneer; centered in arch;infill painted black;uppermost surface painted white

4'-0"

5" CH

2 3/4" CH

1"

1"

1"

1" CH

7 1/4"

6"

10"

Changeable/removable panelsallow for messageupdating

Fabricated aluminum curved cap painted to match Avonitesimulated granite

High-performance black vinyl copy; fontDIN Schrift Engschrift

1/2” Avonite simulated granite veneer

Rule to be paintedMP Gold Metallic

"P" symbol and lot numberto be high-performanceblack vinyl; fontDIN Schrift Engschrift

Lot name high-performanceblack vinyl; font Trajan Bold

High-performance reflectivewhite vinyl backgroundwith high-performanceblack vinyl text.

White reveals

Rule to be paintedMP Gold Metallic

3"CH

2 3/8" CH

IP-1 - Parking Identifier (Uptown and East) Scale: 1/2"=1'-0"

TOP VIEW ISOMETRIC VIEW POSSIBLE MESSAGES - top panel

POSSIBLE MESSAGES - bottom panel

SIDE VIEW

Below-grade footing per code;pad per Universityspecifications

APCO PolySignª Component System (or equal); painted white; modular, removable fiberglass panels; engineered aluminum components/ housing; impact resistant; wind load engineered to 120 mph; seven-year warranty

4'-2"

14"

1/2” Avonite simulatedgranite veneer

Fabricated aluminum curved cap painted to match Avonite simulated granite

White Avonite simulated granite veneer

1/2” Avonite simulatedgranite veneer

2'-0"

9'-2 1/4"

RPGeneral parking regulatory and/or information sign.

DV-1, 2 or 3Campus Vehicular Directional sign guiding the driver to the appropriate parking lot.

Sequence of EncounterThe graphic below illustrates how a driver, upon entering the campus, might encounter a sequence of signs leading into a parking lot.

IP-1, 2 or 3Parking Identifier sign located at the main entrances to parking.

IP-4Parking Aisle Identifier sign.

SIGN TYPE: IP-1

FUNCTION: IDENTIFICATION

PRODUCT: APCO / CUSTOM

CAMPUS: UPTOWN / EAST

These signs identify major Uptown and East campus lots. A changeable inset panel can carry general/regula-tory information or list campus facili-ties best accessed from the lot.

The Avonite simulated granite veneer signs use a custom alu-minum cap painted to match the veneer. The University logo is etched into the veneer with the infill painted gray and the logo itself painted white. The changeable/removable face is high-performance reflective white vinyl with high-per-formance black vinyl text and graph-ics. A painted gold band gives added emphasis to the “Permit Required” regulatory statement at the bottom of the sign face. The parking lot name is rendered in the Trajan Bold typeface. Other information is in the DIN Schrift Engschrift typeface.

Note: Messaging shown on this page is for illustration purposes only to rep-resent the possible messaging that could be used to designate and regulate parking on the campuses. The University’s parking authority should be con-sulted on proper wording before any signs designating or regulating parking are ordered.

Page 30: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 0N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SRevised 9/23/14

P A R K I N G I D E N T I F I E R - P Y L O N ( D O W N T O W N C A M P U S )

Light BlueReflective Vinyl

LimestoneGold Metallic Painted Aluminumto match limestone

Match toPantone #402U

A8080-0Matte Black vinyl

White

HAWLEY THURLOW

Draper HallHawley HallHusted Hall

Milne HallPage HallRichardson HallDraper Hall

P E R M I T R E Q U I R E D

Criminal JusticeContinuing StudiesDir. PDP

GSPASocial WelfareCriminal JusticeContinuing

P E R M I T R E Q U I R E D

IP2-a IP2-b

6'-2 1/4"

3'-0"

3'-0"

5"

1'-0"

2 1/2"2 1/2"

11"1'-4"

9 1/8"

HAWLEY

Logo screened onto fabricated cap

P E R M I T R E Q U I R E D

Criminal JusticeContinuing StudiesDir. PDP

GSPASocial WelfareCriminal JusticeContinuing

5" CH

2 3/4" CH

1"

1"

10"

Changeable/removable panelsallows for messageupdating

Fabricated aluminum curved cap painted to match limestone

High-performanceblack vinyl copy; fontDIN Schrift Engschrift

Limestone base

1" Rule to be paintedMP Gold Metallic

High-performancereflective white vinylbackground withhigh-performanceblack vinyl text.

"P" symbol and lot numberto be high-performanceblack vinyl; fontDinSchrift Engschrift

Lot name high-performanceblack vinyl;font Trajan Bold

White reveals

Rule to be paintedMP Gold Metallic

Red brick to matcharchitecture Red brick to match

architecture

3"CH

TOP VIEW ISOMETRIC VIEW

SIDE VIEW

Below-grade footing per code;pad per Universityspecifications

APCO PolySignª Component System (or equal); painted white; modular, removable fiberglass panels; engineered aluminum components/ housing; impact resistant; wind load engineered to 120 mph; seven-year warranty

4'-2"

14"

Fabricated aluminum curved cap painted to match limestone

Limestone base2'-1 1/8"

9'-3 3/8"

IP-2 - Parking Identifier (Downtown) Scale: 1/2"=1'-0"

POSSIBLE MESSAGES - top panel

POSSIBLE MESSAGES - bottom panel

IP2-1 IP2-3IP2-2

1'- 0"

3"

1'-6"

4'-8"

C

RPGeneral parking regulatory and/or information sign.

DV-1, 2 or 3Campus Vehicular Directional sign guiding the driver to the appropriate parking lot.

Sequence of EncounterThe graphic below illustrates how a driver, upon entering the campus, might encounter a sequence of signs leading into a parking lot.

IP-1, 2 or 3Parking Identifier sign located at the main entrances to parking.

IP-4Parking Aisle Identifier sign.

SIGN TYPE: IP-2

FUNCTION: IDENTIFICATION

PRODUCT: APCO / CUSTOM

CAMPUS: DOWNTOWN

These signs identify major Downtown Campus parking. A changeable inset panel can carry additional information or list the campus facilities best accessed from the parking area.

The signs use a limestone veneer and brick base with an aluminum cabinet and cap. The cabinet is painted white and the cap is painted to match the limestone base. The University logo is silk-screened onto the cap. The changeable/removable face is high-performance reflective white vinyl with high-performance black vinyl text and graphics. A painted gold band gives added emphasis to the “Permit Required” regulatory statement at the bottom of the sign face. The parking area name is rendered in the Trajan Bold typeface in all caps. Other informa-tion is in the DIN Schrift Engschrift typeface.

Note: Messaging shown on this page is for illustration purposes only to rep-resent the possible messaging that could be used to designate and regulate parking on the campuses. The University’s parking authority should be con-sulted on proper wording before any signs designating or regulating parking are ordered.

Page 31: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 1N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

P A R K I N G I D E N T I F I E R - P O S T & P A N E L

A8080-0Matte Black

A7823-RPurple reflective

A7818-RDark Red reflective

Gold Metallic

White

PAINT (Matthews Paint Co. exterior grade or equivalent)

VINYL (Avery Dennison or equivalent)

IP-3 - Parking Identifier - post & panel Scale: 1/2"=1'-0"

FACULTY / STAFF PARKING8AM - 4PM MONDAY-FRIDAY

Student Parking PermittedAt Other Times with Decal

P E R M I T R E Q U I R E D

IP3-1 IP3-2

IP3-t1

IP3-b1

Parking Permits Available at:

P E R M I T R E Q U I R E D

IP3-b2

POSSIBLE MESSAGES - small top panelThis panel would be used in conjunction with a secondpanel below it containing regulatory and/or other information.

POSSIBLE MESSAGES - large single panel

servicevehicles

Administration

IP3-t2

P E R M I T R E Q U I R E D P E R M I T R E Q U I R E D

POSSIBLE MESSAGES - bottom panelFont DIN Schrift Engschrift

Parking andMass Transit Building

Collins Circle Parking Booth

P E R M I T R E Q U I R E D

SERVICEVEHICLES

27"

55"

28"

The post and curved header assemblyis designed to accept either a single 55"tall graphic panel or two smaller panels.That choice is driven by the particularlocation and messaging need(s).

3’11”

top pan

el

single

panel

bottom

panel

5" metallic gold vinyl rule

4 1/2" CH

2'-5"

7'-0"

4"4"

4"

1'-1"

4" square white post

High-performance black vinyl for graphics and copy; "P" symbol font is DIN SchriftEngschrift; copy font is Trajan Bold

High-performance black vinyl;font DIN Schrift Engschrift

Black and white vinyl logocentered in arch

Custom fabricated archcrown painted gold metallic;allow for panel removal

High-performance reflective white vinylbackground with high-performance blackvinyl text

APCO SignPanel¨ or equal; modular aluminum posts with interlocking aluminum panels; top access for panel removal; windload engineered; adjustable; durable, non-corrosive extruded aluminum components and stainless steel hardware; vandal-resistant screws for posts and wall channel caps; painted white; five-year warranty

Below-grade footing per code; pad per University specifications

ISOMETRIC VIEWnot to scale

14"

TOP VIEW

SIDE VIEW

8 1/2"

3'-11"

5"

3"CH

4'-8"

C

4'-7"

2'-3"

3"

3 1/2"

3 1/2" 2 1/2"

5"

12"

10"

=

=

2'-4"

4'-7"

7 1/2"

24"

12"

1"

RPGeneral parking regulatory and/or information sign.

DV-1, 2 or 3Campus Vehicular Directional sign guiding the driver to the appropriate parking lot.

Sequence of EncounterThe graphic below illustrates how a driver, upon entering the campus, might encounter a sequence of signs leading into a parking lot.

IP-1, 2 or 3Parking Identifier sign located at the main entrances to parking.

IP-4Parking Aisle Identifier sign.

SIGN TYPE: IP-3

FUNCTION: IDENTIFICATION

PRODUCT: APCO / CUSTOM

CAMPUS: ANY

These signs are used to identify entrances to lots that are not used by the public (at smaller parking areas reserved for faculty and staff or those used by service vehicles, for example). When configured with two panels, the lower panel can carry additional information or list the facilities best accessed from the lot.

The modular aluminum post-and-panel signs are painted white and use a custom aluminum arch that is painted gold. The University logo is applied to the arch with black and white vinyl. The removable/change-able sign face is high-performance reflective white vinyl with high-performance black vinyl lettering and graphics. The facility or parking lot name is rendered in the Trajan Bold typeface. Other information is in the DIN Schrift Engschrift typeface.

Note: Messaging shown on this page is for illustration purposes only to rep-resent the possible messaging that could be used to designate and regulate parking on the campuses. The University’s parking authority should be con-sulted on proper wording before any signs designating or regulating parking are ordered.

Page 32: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 2N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

P A R K I N G A I S L E I D E N T I F I E R

White paint /A7801-R White reflective

Signal Jet Black paint /A8080-0 Matte Black vinyl

Gold Metallic

IP-4 - Parking Aisle Identifier Scale: 1/2"=1'-0"

2D U T C H

2D U T C H

4ATHLETIC

3S TAT E

1V I S I TO R

SELECT MESSAGES - not to scale

Three-sided triangle sign type is a single sheet of cut and bent 0.10" aluminum, supported on the existing post with stainless steel banding.It is designed to work with posts of varying diameter, taper and cross-section shapes. It is also designed to avoid any penetration of the post.

A set of two s.s. bands are laced through appropriate slots in the end panels, pulling the end panels onto the post, and centering the assembly around the post.

The bands are cinched tightly around the post.VHB tapes may also be used to assist in stabilizing the assembly onto post.

Sign panel strip,

bent into triangular

form, slips sideways

onto existingpost.

10'-0"

1'-6"

Three-sidedsign type

with identicalmessage on

each side.

Stainless steel bands,bolts, nuts and otherattachment hardwareto be industry standard.

TOP VIEWnot to scale

1/8" aluminum panel painted black and white

Aisle number is high-performance white reflective vinyl; font Trajan Bold

1/2" metallic gold vinyl rule

Associated Quad or Building name;High-performance black opaque vinyl copy; font DIN Schrift Engschrift

1'-7"

3 1/2" CH

13"

5 1/2"

1/2"

9 1/4" CH

RPGeneral parking regulatory and/or information sign.

IP-4Parking Aisle Identifier sign.

DV-1, 2 or 3Campus Vehicular Directional sign guiding the driver to the appropriate parking lot.

Sequence of EncounterThe graphic below illustrates how a driver, upon entering the campus, might encounter a sequence of signs leading into a parking lot.

IP-1, 2 or 3Parking Identifier sign located at the main entrances to parking.

SIGN TYPE: IP-4

FUNCTION: AISLE IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: ANY

These three-sided pole-mounted aluminum signs are used at regular intervals on large campus lots to help people locate their cars. They are painted black and white with high-performance vinyl graphics. The aisle number is in the Trajan Bold typeface, while the lot name is in the DIN Schrift Engschrift type-face.

Page 33: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 3N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SRevised 9/23/14

P A R K I N G R E G U L A T O R Y / I N F O R M A T I O N A L

A7801-RWhite reflective

A7820-RLt Blue reflectiveHANDICAP

A8080-0Matte BlackSYMBOL/NOTICE

A7823-RPurple reflectiveFACULTY/STAFF

A7818-RDark Red reflectiveREGULATORY/WARNING

A3810-RNew Gold reflectiveSTUDENT/PERMIT

White

PAINT (Matthews Paint Co. exterior grade or equivalent) VINYL (Avery Dennison or equivalent)

FREEDOMAND

EVENINGSHUTTLE STOP

VIOLATORSWILL BE TOWED

STUDENTDROP-OFF

FACULTY-STAFFONLY

2 1/2"

PLEASE, NOROLLERBLADING

RESIDENTSONLY

PERMIT REQUIRED

RP (a) - Parking/Regulatory Template Scale: 3"=1'-0"

Shown above is a typical messaging configuration. Variations on this layout willneed to be considered to accommodate alternative messaging needs.

RP (b) - Informational Template Scale: 3"=1'-0"

Shown above is a typical messaging configuration with multiple lines of copydevoted to the primary (Identification) information. Variations on this layoutmay need to be considered to accommodate alternative messaging needs.

BOTTOM ZONE: CONSEQUENTIALCenter justify copy in zone; color ofcopy varies; same copy spec as indicated above.

No graphics should extend intothis bottom zone

2" Telespar Unistrut square post; painted white with white cap.

Back is of sign panelis painted white.

6'-0"

Bolt to securesign onto post;painted white.

Below-gradeper code withbreakaway anchor sleeve

No graphics should extend intothis bottom zone

Gold reflective vinyl header.

Use same fabrication specs as identified for the RPa

RPa RPa RPa RPb

5/8

" m

arg

in

5/8

" m

arg

in

5/8

" m

arg

in

5/8

" m

arg

in

BOTTOM ZONE: IDENTIFICATIONVertically align the copy 1" below the symbol, horizontally centered within the zone.

COPY: Surface-applied vinyl; color may vary (black is standard); font DIN Schrift Engschrift in all CAPS; 1 1/2" cap height standard (can vary depending on copy length) with 5/8" interline spacing.

MIDDLE ZONE: REGULATORYColored background height is consistently 4 1/4"; color varies per function/use (see color reference below).COPY: Surface-applied vinyl; color varies; font DIN Schrift Engschrift in all CAPS; 1 1/4" cap height standard (can vary depending on copy length) with 1/2" interline spacing. If one line appears in a zone, center vertically in zone.

TOP ZONE: SYMBOL(s)/ARROWThis zone is reserved for 4 3/4" high vinyl symbol(s) and/or a directional arrow, if applicable, center justified within the zone as indicated; color may vary.

TOP ZONE: SYMBOL(s)/ARROWThis zone is reserved for 4 3/4" high vinyl symbol(s) and/or a directional arrow, if applicable, center justified within the zone as indicated; color may vary.

Gold reflective vinyl header.

1/2" radius bottom corners10 3/4"10 3/4"

SAMPLE LAYOUTS SIDE VIEWnot to scale

TOP VIEW typical

.080 Aluminum panel painted white with base layer of engineer-gradereflective vinyl and surface-applied vinyl graphics

2 1/2"

4 3/4"

5/8"

2 1/2"

5/8"

5/8"

4 3/4"

1"

4 1/4"

4 1/4"

1" 1"

7 1/2"

1'-6"

1'-0"

VIOLATORSWILL BE TOWED

RESERVEDPARKING

DV-1, 2 or 3Campus Vehicular Directional sign guiding the driver to the appropriate parking lot.

Sequence of EncounterThe graphic below illustrates how a driver, upon entering the campus, might encounter a sequence of signs leading into a parking lot.

IP-1, 2 or 3Parking Identifier sign located at the main entrances to parking.

IP-4Parking Aisle Identifier sign.

RPGeneral parking regulatory and/or information sign.

SIGN TYPE: RP

FUNCTION: REGULATORY / INFORMATION TEMPLATE

PRODUCT: CUSTOM

CAMPUS: ANY

These pole-mounted white painted aluminum signs with vinyl graphics are used to convey parking restric-tions and provide other regulatory information.

The sign type template is divided into zones as needed. For the “a” template, the top zone is reserved for a symbol or arrow. The middle zone uses a colored background to indicate the audience (gold for students, purple for faculty and staff, blue for barrier-free parking, red for other audiences or restrictions). The bottom zone, if needed, uses black or red text to indicate time limits, consequences, or other regulatory information. The “b” template is more for identification or informa-tional purposes. It only has one zone that consists of a symbol and copy.

Page 34: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 4N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

P E D E S T R I A N C A M P U S M A P

Gold Metallic White Aluminum paintedto match Avonite

Avonite simulatedgranite veneer

MP-1 - Pedestrian Campus Map, ColumnarScale: 1/2"=1'-0"Note: for use only on the Uptown Campus

MP-2 - Pedestrian Campus Map, PedestalScale: 1/2"=1'-0"The University may elect to specify an alternativepedestal mount instead of the tall columnar structure.

MP-1 Modified - Pedestrian Campus Map,Cabinet Mounted on Podium ColumnScale: 1/2"=1'-0"

Campus Map

Campus Map

Campus Map

COLUMNARISOMETRIC

PEDESTALISOMETRIC CABINET-ON-COLUMN

ISOMETRIC

Isometricillustrationsnot to scale

1” square tube and “?” plate are to be stud mounted to the concrete column using aluminum studs and 1/2” spacers

Column

1” Sq. tube

1/2” space

1/4” aluminum studs with spacers

Campus Map

Top ViewAluminum Filler Panel

Tamper resistant stainless screws

90 degree aluminum angle

1”x1”x1/8” 90 degree aluminum angle

6”

11”

.080 aluminum “U” shaped filler to have white painted finish to match map box

Cabinet is mountedflush to existingcast concretestructural Podiumcolumn.

ExistingPodiumcolumn

6 3/4"

33 3/4" 27"

5 3/8"

1”x1”x1/8” sq.aluminum tubemitered at cornerspainted gold metallic

1 3/4"

1"

1"

1 1/2"

8'-10"

10'-2"

Campus Map

Post fabricated from1/4” plate welded atcorners and painted white

6"

6 1/2"

12” Sonotube 4000psi concrete footing 4’ below grade

31 1/2" 26"

5 3/8"

Back side of sign cabinet is enclosed and painted white.

BACK VIEW

2'-6"

TOP VIEW

1'-0" 1'-2"

1"

~1'-3 1/2"

Campus Map

10'-0"

1/2” Avonite simulatedgranite bonded to 2”x2”welded aluminum frame

Screened black copy;Trajan Bold font

Aluminum sign cabinetaccepts fiberglass panel insert with non-glareacrylic protective cover;inserts are vandalresistant but removable;sides protect insert edges;cabinet is securelymounted to structure.

1/2” Avonite simulatedgranite bonded to1”x1”x1/8” weldedaluminum tube frame

Below-grade footingper code; pad perUniversity specifications

31 1/2"

5 3/8"

1 3/4"

1"

1”x1”x1/8” sq. aluminumtube mitered at cornerspainted gold metallic

8" 6"

2"

10"

1"

1'-2 1/4"

1 1/2"

12”

7"

White lexan faces and black vinyl background

Cabinet is fabricated with 1”x1”x1/8” welded aluminum tube covered with 0.080” aluminum sheet versalocked to frame. Bottom is hinged at back and houses a 24” florescent lighting fixture.

Internally illuminated fabricated aluminum cabinet with aluminum top cap painted to match granite Avonite.

SIDE VIEW

1"

8"2"

12”

120

120

18"

Map is reverse printed with solvent basedinks on clear vinyl. Applied to underside of temperedglass with a translucentvinyl backer. Must be vandal-and fade resistent. (note: map graphic is for representation only).

15 3/4”

27 5/8”

Printed Area Dimensions(Glass is 29 5/8” x 18” or 17 7/8”)

SIGN TYPE: MP-1, MP-2

FUNCTION: WAYFINDING

PRODUCT: CUSTOM

CAMPUS: VARIES

These pedestrian orientation signs are located along primary pedestrian routes around the campus, espe-cially at exits from visitor parking lots and at gathering places. They hold fiberglass-embedded map graphics printed in UV-resistant inks that depict the entire campus and identify major destinations and facili-ties including parking lots, building entrances and emergency phones. The map should always be properly oriented to the viewer in that if North is up on the map, the viewer should be looking North.

The Columnar structure is primar-ily for the Uptown Campus. Black aluminum panels displaying a white vinyl question mark are mounted at the top of the 1/2” Avonite simulated granite pillar on all four sides, to help visitors identify the maps from a distance and so it can be seen over parked vehicles. Gold painted aluminum accent bars surround the pillar below the aluminum panels. The base is wrapped in 1/2” Avonite simulated granite veneer.

The alternative Pedestal mount can be used on any campus. The white aluminum pedestal holds the same map sign cabinet as the MP-1 and is supported with a cast concrete base.

Page 35: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 5N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

P E D E S T R I A N D I R E C T I O N A L D I A G R A M ( P O D I U M )

MP21249 Gold Metallic

41306SPSignal Jet Black

White

Univ.Hall

Massry Centerfor Business

Life Sciences

1 5/8"C

C

2"

14"

1 3/4"

1" CH

9/16"

9/16"

3"

14"

23 1/2"

6 1/2"

DP-1 - Pedestrian Directional Diagram (Uptown) Scale: 3"=1'

SIDE VIEW

MAP ORIENTATIONS

WALL

/CO

LUM

N

White vinyl with printed graphics.

Black vinyl copy and symbolor printed graphics with high-level exterior and interior destinations; font DIN Schrift Engschrift

Podium orientation map;“You”graphic and map moves/rotatesbased on sign's location, font DIN Schrift Engschrift (0.25”)

Gold metallic vinyl or paint.

Gold metallic vinyl or paint Vinyl printed logo.

4'-0"

2-1/4" Telespar Unistrut square post; painted white with cap on top end.

.080 white aluminum plate which is bolted into a post.

1/2” radius corner.

AdmissionsPerforming Arts CenterUniversity Library

Academic Podium

Indian Quad

State Quad

DutchQuad

ColonialQuad

YOU

Fine Arts Business

UniversityLibrary

Soci

alSc

ienc

es

1"

Carillon

Academic Podium

Indian Quad

State Quad

DutchQuad

ColonialQuad

Chemistry Physics

Earth Science& Mathematics Fine Arts

Education

CampusCenter

Humanities

ScienceLibrary

Business

Biol

ogy Performing

ArtsCenter

UniversityLibrary

Soci

alSc

ienc

es

Arts &Sciences

Caril

lon

AcademicPodium

Indian Quad

StateQuad

DutchQuad

ColonialQuad

Chem

istry

Phys

ics

Earth

Sci

ence

& M

athe

mat

ics

Fine

Arts

Educ

atio

n

CampusCenter

Hum

aniti

es

Scie

nce

Libr

ary

Busi

ness

Biology

PerformingArts

Center

UniversityLibrary

SocialSciences

Arts

&Sc

ienc

es

Carillon

Academic Podium

IndianQuad

StateQuad

DutchQuad

ColonialQuad

ChemistryPhysics

Earth Science& MathematicsFine Arts

Education

CampusCenter

Humanities

ScienceLibrary

Business

Biol

ogyPerforming

ArtsCenter

UniversityLibrary

Soci

alSc

ienc

es

Arts &Sciences

Caril

lon

AcademicPodium

IndianQuad

State Quad

DutchQuad

ColonialQuad

Chem

istry

Phys

ics

Earth

Sci

ence

& M

athe

mat

ics

Fine

Arts

Educ

atio

n

CampusCenter

Hum

aniti

es

Scie

nce

Libr

ary

Busi

ness

Biology

PerformingArts

Center

UniversityLibrary

SocialSciences

Arts

&Sc

ienc

es

NORTH UP EAST UP

SOUTH UP WEST UP

Univ.Hall

Mas

sry

Cent

erfo

r Bus

ines

s

Life

Sci

ence

s Univ.Hall

Massry Centerfor Business

Life Sciences

Univ.Hall

Mas

sry

Cent

erfo

r Bus

ines

s

Life Sciences

Univ.Hall

Life

Sci

ence

s

Carillon

ChemistryPhysics

Earth Science& MathematicsFine Arts

Education

CampusCenter

Humanities

ScienceLibrary

Business

Biol

ogyPerforming

ArtsCenter

UniversityLibrary

Soci

alSc

ienc

es

Arts &Sciences

Univ.Hall

Mas

sry

Cent

erfo

r Bus

ines

s

Life

Sci

ence

s

SIGN TYPE: DP-1

FUNCTION: WAYFINDING

PRODUCT: APCO / CUSTOM

CAMPUS: UPTOWN

The signs are placed on the “out-side” of the Podium columns so that viewers can compare the map to the view in front of them across the Podium, and so that the maps are not visible from the Carillon. The large illustration here shows an installation along the north side of the Podium with the map orientation “south up.” It is important that these maps be oriented properly for each of the four possible map orientations (the square area of the map will accommodate this).

These signs can also be used with existing Quad dormitory housing maps at locations on the Quads.

For mounting details, refer to Exterior Wall Mounting Conditions: Condition B under the Installation of Signs section on page 2:44.

Page 36: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 6N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

P E D E S T R I A N D I R E C T I O N A L – P O S T & P A N E L

Gold Metallic 41306SPSignal Jet BlackMatte Finish

White

4'-0"

DP-2 - Pedestrian Directional-Post/Panel Scale: 3"=1'-0"

Post mounting Rail mounting

Logo painted MP Signal Jet Black; whitevinyl print.

Bolt to securesign onto post;painted samecolor as signbackground.

1'-0"

1'-6"

2 1/2"

1"

3/8"

1 5/8"

2"

1 3/4"

1" CH

Header painted MP 21249 Medium Red Gold MetallicSatin Finish

Footer paintedMP 21249 MediumRed Gold MetallicSatin Finish

1/2" radius corner

Direction dividerrule line painted MP 21249 Medium Red Gold MetallicSatin Finish or vinyl; located 3/4" above copy

Space between copy canvary based on number oflines, minimum 3/4", standard 1".

1/8" thick aluminum panel painted white; back and sides are also painted white

Graphics painted to match MP Signal Jet Black, mattefinish, font DIN SchriftEngschrift, or vinyl.

Graphicspainted to match MPSignal Jet Black, mattefinish; font DIN SchriftEngschrift

1/8" thickaluminum panel;back of sign is painted white.

SIDE VIEWnot to scale

SIDE VIEWnot to scale

BACK VIEWnot to scale

BACK VIEWISOMETRICnot to scale

TOP VIEW

1 1/4"

1"

1" CH

2" Telespar Unistrut square post; painted whitewith cap on top end.

2 1/8"

Below-grade per codewith breakaway anchorsleeve

15"18"

1/8"

1/8"

1/8"

3/4"

2 3/8"

3"

1 1/4" existing railing

1/4" 1/4"

aluminum supportwelded to backer plate;

painted white

Aluminum support to be bent at intervals as noted and weldedto aluminum backer panel as shown above.

1/8" aluminum backerplate; painted white

11 3/4"1'-3 1/4" 1'-3 1/4"

tamper-resistent stainless steel fasteners are bolted

through bottom base of support panel to secure sign

to an existing railing

Provide a rubber gasket or use VHB tape at

interface with the railing

Existing railing may vary; site verify (mounting intent derived

from the existing rail on the Uptown Campus' Podium)

1/8" aluminum graphic panel; back is painted

white; mounted to backer using 3M VHB tape

SIGN TYPE: DP-2

FUNCTION: WAYFINDING

PRODUCT: CUSTOM

CAMPUS: ANY

These post- or rail-mounted alumi-num signs are used to route people to selected destinations within walking distance. They are painted white and use silk-screened black text and arrow graphics, and a silk-screened black and white University logo on a painted gold header. The destinations are divided by direc-tion (left, then right, then straight ahead as needed) and painted gold divider lines separate the directional groupings. Text is in the DIN Schrift Engschrift typeface.

Page 37: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 7N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

P E D E S T R I A N B U L L E T I N B O A R D S - E X T E R I O R

Gold Metallic BlackWhite Cardinal Red Bright Orange Bright Yellow Bright Green Olympic Blue Royal Purple

2'-4"

3"

1'-4"

2”1”

Cabinet is mountedaround cast concretestructural (Podium)column.

Radius corners

Cabinet is mountedflush to cast concretestructural (Podium)column or buildingexterior wall.

TOP VIEW

Podiumcolumn

TOP VIEW

ISOMETRIC VIEW

2'-10"

1'-6"2" 2"

2'-0"

1'-4"

Sub-surface vinyl header on display panel;Gold metallic background andPantone 269 logotype; second header, black with white textrendered in DIN Schrift Mittleschrift typeface(building name for whom the boardis advertising below)

SIDE VIEW

1'-10"

4” maxiumprofile projection

8 1/2 x 11sheet

8 1/2 x 11sheet

11 x 17sheet

Modified APCO Visuline 2300

display cabinet (or equal); extruded

aluminum casing and door with 1/4" clear

tempered glass; weathered for exterior

use; concealed stainless steel hinges and locks;

painted white

NB-1 - Bulletin Board-Exterior Four-sided Scale: 1"=1'-0"

NB-2 - Bulletin Board-Exterior Single-sided Scale: 1/2"=1'-0"

5'-0"

C

5'-0"

C

Note: This four-sided cabinet is for limited use only when used on the Podium (for high level destinations like the Campus Center, Performing Arts Center and the like).

Note: When mounting this one-sided cabinet in the Podium, it should not face the Carillon (to keep the inside of the Podium clean).

text

Corkboard 16”x28” display area;

self-healing; Black

NB-2A - Bulletin Board-Exterior Four-sided Without Glass Door Scale: 1"=1'-0"

The varying color band designates where

program/events posters can be posted (i.e. Campus

Activities, Multicultural Meetings and Events); The

text rendered in DIN Schrift Mittleschrift

typeface; Band Colors are: Bright Orange Pantone

021C (3M Chart), Cardinal Red (3M Chart), Bright

Yellow Pantone 109C (3M Chart), Olympic Blue

Pantone 7461C (3M Chart), Royal Purple (3M Chart),

Bright Green Pantone 348C (3M Chart)

BIOLOGY

Corkboard display area size will vary dependent on

cabinet size; self-healing corkboard; set back no

more than 1/2 inch from face of sign; Black

**Size will vary beacuse each cabinet is required to accommondate either (2) 8 1/2” x 11” or (1) 11“ x 17” sheets of paper, the standard gold band and the color band with text

(Varies**)

(Varies**)

(Varies**)

Campus CenterModified APCO Visuline 2300 or equal display cabinet; extruded aluminum casing and square door with 1/4" clear tempered glass; weathered for exterior use

Stainless steel hinges and locks on front face and bottom to secure doors closed; painted white

Corkboard display area size will vary dependent on cabinet size; self-healing corkboard* to match APCO A47 Light Grey.

*Sign can also accept changeable message strips, magnetic display board, or changeable letter board. Standard sizes available for other locations.

Sub-surface vinyl header on the display

panel; Gold metallic background and Pantone

269 logotype; second header, black with white

text rendered in DIN Schrift Mittleschrift

typeface (builing name for whom the board is

advertising below)

SIGN TYPE: NB-1, NB-2

FUNCTION: DISPLAY

PRODUCT: APCO / CUSTOM

CAMPUS: ANY

These one- or four-sided signs are typically mounted to columns in the Uptown Campus Podium and used to post announcements of upcoming campus events and other temporary notices, though they can also be used in other locations. The modi-fied aluminum display cabinets have locked doors (with key) with tem-pered glass and contain self-healing corkboard display panels that can hold either a single 11-by-17-inch sheet or two 8 1/2-by-11-inch sheets. The University logo is silk-screened onto the display panel header. The signs can also accept changeable message strips, a mag-netic display board or a changeable letter board in lieu of the corkboard display panel.

The four-sided column-mounted ver-sion should only be used in isolated instances (i.e. by the Performing Arts Center, Campus Center, Library or within the Student Quads). When locating the one-sided column-mounted version on the Podium, the signs should not be placed on the side of the column facing the Carillon, so that they are not visible when looking across the Podium.

These one-sided boards can also be used outside buildings like Parking Management or a cafeteria to list hours of operation. If space is avail-able, the board should be a standard APCO (or similar vendor) size.

Page 38: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 8N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

P E D E S T R I A N T R A I L I D E N T I F I E R

TOP VIEW ISOMETRIC VIEW

24” Sonotube with3000 PSI concrete

6” No. 1 Stone

4’-0”

10’ 2”

3’-6”

1” Campher

3"

3'-0"(variesdep.on

copy)

4"

WhiteGold Metallic Bethel WhiteGranite

Ind

ian

po

nd

Tr

ail

IT - Pedestrian Trail Identifier Scale: None

Aluminum panelset into recess; Trajan Bold trail namereflective vinyl black and gold

Four sided granite pylonwith recessed panels

2" CH

8"

8"

6'-8"

8"

Aluminum panelset on surface; Minerva icon reflectivevinyl white and gold

Revised 10/03/12

SIGN TYPE: IT

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: UPTOWN

These granite pylon signs are used to mark pedestrian trails on the Uptown Campus. The University icon is spray painted onto the pylon in white and gold. A recessed panel on each side holds a gold-painted aluminum plate onto which the trail name in black. The name is ren-dered in capital letters in the Trajan Bold typeface.

Page 39: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 3 9N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

A L U M N I K I O S K

Existing BuildingConcrete

Self-RepairingCoarkboard

Extruded AluminumAlumni Kiosks - Pedestrian Information Scale: 1/2"=1'-0"

Top

Bottom - With Lock

SideWithoutHinge

NeopreneGasket

Alternate, 120-degree Corner Extrusion for 3-Sided Freestanding Kiosk

All frames are to be fabricated from custom aluminum extrusions.

SideWithHinge

NeopreneGasket

Full-Length Aluminum Piano Hinge

DETAIL - CUSTOM ALUMINUM EXTRUSIONSNOT TO SCALE

120

65" 60"

TOPTOP

CORNERVIEW FACE

VIEWTHREE-SIDED FREESTANDING

Kiosk legs anchor bolted to mounting surface through mounting plates

Three-sided kiosk utilizes frames equal in size and shape to single-sided wall-mount unit

120-degree aluminum corner extrusion

83" 83" 78"

53-1/2"

TOP

FRONT

FOUR-SIDED COLUMN-MOUNT

FOUR-SIDED COLUMN-MOUNT

1”X1” aluminum tubing truss

1”X1” aluminum tubing truss

All truss joints to be welded

All truss joints to be welded

0.080” aluminum cap on top of all frames

90-degree aluminum corner extrusion

1/8” thick, 1”x1” square aluminum tubing truss mounting frame connects kiosk to existing building column

Corkboard panel cut away for clarity

All doors are to be hinged on right side

All doors are to have a 90-degree open stop

1” vents through back of panel two on top back & two on bottom back

Door pull

Lock housed in bottom aluminum extrusion

Existing building column

Existing building column

36"4" 2"47"

36"

65" 60"

4" 2"47"41"

TOP

FRONT

SINGLE-SIDED WALL-MOUNT

Frame made of custom aluminum extrusions

Door swings on full-length aluminum piano hinge

1/2” self-repairing coarkboard backed with 0.063” aluminum panel welded to custom extrusion frame

3/8” tempered glass front

Radiused Corner Extrusions

SIGN TYPE: ALUMNI KIOSK

FUNCTION: INFORMATION

PRODUCT: CUSTOM

CAMPUS: ALL

The kiosks display information about the outstanding Alumni of The University at Albany. These displays will honor the past students and be inspiration to the new and current students.

These displays can be fabricated as either single faced wall mounted, four sided around existing columns, or three sided free standing.

Each designed kiosk has extruded aluminum radius vertical corners. The display panel has self healing corkboard and is covered with 3/8” tempered glass in an aluminum frame.The door of the kiosk will be hinged with an aluminum piano hinge on the right side. The frame will be secured by a lock at the top and/or bottom of the extrusion.

All panels have a .080 aluminum panel as a substrate with an out-door, solvent or acrylic based inkjet print on 3M controltac vinyl applied to surface. Also to have print guard UV matte applied over printed vinyl to retard fading.

Page 40: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 0N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

OpaqueBlack vinyl

White Pantone269

Avonite simulatedgranite veneer

Gold Metallic Painted Aluminumto match granite

2'-0"

1"

1"

6'-0"

10 1/2" 8"

Below-grade footingper code; pad per Universityspecifications

110-120 VAC

Athletic ComplexIndian QuadState QuadBig Purple Growl

Colonial QuadDutch Quad

Academic PodiumVisitor P1

9'-1/2"

6" PANEL

4" CH

MP04761Steel Wool

1'-0"

Fabricated aluminum curved cap painted to match granite

TOP VIEW

APCO PolySignª Component System (or equal); painted white; modular, removable fiberglass panels; engineered aluminum components/ housing; impact resistant; windload engineered to 120 mph; seven-year warranty

4'-2"

1/2” Avonite simulatedgranite veneer

Fabricated aluminum curved cap painted to match granite

1/2” Avonite simulatedgranite veneer

1/2” Avonite simulatedgranite veneer

8"

5" SYM

Hydrel 6100 SeriesIn-grade up-lightfor each sign face,controlled by atime clock or photo-electric switch.Illumination levels shouldtypically fall between15-25 footcandles.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

Athletic Complex

Indian Quad

State Quad

Big Purple Growl

Colonial Quad

Dutch Quad

Podium

Visitor Parking

1/2” Avonite simulatedgranite veneer

High-performance black vinylfor copy and graphics,DIN Schrift Engschrift font.

High-performance reflective white vinylbackground with high-performanceblack vinyl text

Temporary event message with vinyl graphics; backgroundPantone 269

1/2" Metallic Gold vinyl rule used above top panelof a direction change

If possible, use a blank insertabove change in direction

ISOMETRIC VIEW ISOMETRIC VIEWBack side of single-sided sign

SIDE VIEW

1'- 0"

1/2” Avonite simulatedgranite veneer

Logo etched into granite;centered in arch; infill painted black;uppermost surface painted white

Sign can be single or double-sided.

4'-0"

3 3/4" ARROW

DV-1 - Vehicular Directional-Pylon (Uptown and East) Scale: 1/2"=1'-0"

V E H I C U L A R D I R E C T I O N A L - P Y L O N ( U P T O W N / E A S T C A M P U S E S )

SIGN TYPE: DV-1

FUNCTION: WAYFINDING

PRODUCT: APCO / CUSTOM

CAMPUS: UPTOWN / EAST

These one- or two- sided signs located on the Uptown and East campuses support wayfinding to major public parking lots and to Top Destinations within the immediate area of each sign. This sign type should be used as needed before intersections with secondary roads, at vehicular decision points, and at approximately 600-foot intervals along longer routes for reinforce-ment of wayfinding messages.

The signs use a 1/2” Avonite simu-lated granite veneer and a fabricated aluminum curved cap painted to match the veneer. The University logo is etched into the veneer with the infill painted gray and the logo itself painted white. Gold rules are used to separate directional group-ings (left, then right, then straight ahead as needed).

The modular fiberglass sign ele-ment holds interchangeable high-performance reflective white vinyl panels to allow easy updating by the University Sign Shop. Lettering is rendered in high-performance black vinyl in the DIN Schrift Engschrift typeface, and high-performance black vinyl is also used for the arrow and any “Circle P” parking symbol graphics. Temporary event mes-sage panels can also be used with a purple background and high-perfor-mance reflective white vinyl lettering.

Each sign can support wayfinding to up to 11 destinations. If a particu-lar location requires wayfinding to more than 11 destinations, a second sign can be installed approximately 60 feet beyond the first to wayfind to the remaining destinations. Destinations should be divided by directional groupings between the two signs, with the left-hand directional destinations listed on the first sign (or left-hand and then right-hand directional destinations if space permits).

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required, with a discreetly, but functionally placed photo-electric switch, to illu-minate the signs in low-light condi-tions.

Page 41: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 1N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

V E H I C U L A R D I R E C T I O N A L - P Y L O N ( D O W N T O W N C A M P U S )

LimestoneGold Metallic Painted Aluminumto match limestone

Match toPantone #402U

OpaqueBlack vinyl

White Pantone269

1"

1"

6'-0"

10 1/2" 8"

Below-grade footingper code; pad per Universityspecifications

110-120 VAC

2 1/2"2 1/2"

11"

Athletic ComplexIndian QuadState QuadBig Purple Growl

Colonial QuadDutch Quad

Academic PodiumVisitor P1

9'-1 5/8"

6" PANEL

4" CH

1'-0"

Fabricated aluminum curved cap painted to match limestone

TOP VIEW

APCO PolySignª Component System (or equal); painted white; modular, removable fiberglass panels; engineered aluminum components/ housing; impact resistant; windload engineered to 120 mph; seven-year warranty

4'-2"

Fabricated aluminum curved cap painted to match limestone

8"

5" SYM

Hydrel 6100 SeriesIn-grade up-lightfor each sign face,controlled by atime clock or photo-electric switch.Illumination levels shouldtypically fall between15-25 footcandles.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

Athletic Complex

Indian Quad

State Quad

Big Purple Growl

Colonial Quad

Dutch Quad

Podium

Visitor Parking

High-performance black vinylfor copy and graphics,DIN Schrift Engschrift font.

High-performance reflective white vinylbackground with high-performanceblack vinyl text

Temporary event message with vinyl graphics; backgroundPantone 269

1/2" Metallic Gold vinyl rule used above top panelof a direction change

If possible, use a blank insertabove change in direction

ISOMETRIC VIEW ISOMETRIC VIEWBack side of single-sided sign

SIDE VIEW

1'- 0"

Logo screened onto fabricated cap

Sign can be single or double-sided.

4'-0"

3 3/4" ARROW

DV-2 - Vehicular Directional-Pylon (Downtown) Scale: 1/2"=1'-0"

Red brick to matcharchitecture

Limestone base

1'-6"

4'-8"

Limestone base

Red brick to matcharchitecture3"

2'-1 1/8"

SIGN TYPE: DV-2

FUNCTION: WAYFINDING

PRODUCT: APCO / CUSTOM

CAMPUS: DOWNTOWN

These one- or two- sided signs located on the Downtown Campus support wayfinding to major public parking lots and to Top Destinations within the immediate area of each sign. This sign type should be used as needed before intersections with secondary roads, at vehicular decision points, and at approximately 600-foot intervals along longer routes for reinforcement of wayfinding messages.

The signs use a limestone base, red brick detail to match the campus architecture, and a fabricated alumi-num curved cap painted to match the limestone. The University logo is silk-screened onto the cap. Gold rules are used to separate directional groupings (left, then right, then straight ahead as needed).

The modular fiberglass sign element holds interchangeable high-perfor-mance reflective white vinyl panels to allow easy updating by the University Sign Shop. Lettering is rendered in high-performance black vinyl in the DIN Schrift Engschrift typeface, and high-performance black vinyl is also used for the arrow and any “Circle P” park-ing symbol graphics. Temporary event message panels can also be used with a purple background and high-perfor-mance reflective white vinyl lettering.

Each sign can support wayfinding to up to 11 destinations. If a particular location requires wayfinding to more than 11 destinations, a second sign can be installed approximately 60 feet beyond the first to wayfind to the remaining destinations. Destinations should be divided by directional group-ings between the two signs, with the left-hand directional destinations listed on the first sign (or left-hand and then right-hand directional destinations if space permits).

Ground, in-grade, up-lighting (Hydrel 6100 Series or equal) is required, with a discreetly, but functionally placed photo-electric switch, to illuminate the signs in low-light conditions.

Page 42: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 2N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

V E H I C U L A R D I R E C T I O N A L – P O S T & P A N E L

Metallic Gold Black White

DV-3 - Vehicular Directional-Post and Panel - 7-Panel Scale: 1/2"=1'-0"

DV-3 - Vehicular Directional-Post and Panel - 10-Panel Scale: 1/2"=1'-0"

ISOMETRIC VIEW

Back side ofsingle sided sign

Not to scaleISOMETRIC VIEW

Not to scale

Back side ofsingle sided sign

Signs may be singleor double sided

I-90 and I-87

Alumni QuadDowntown Albany

2m

4m

Downtown Campus 3m

3 1/2"

2 3/8"

SIDE VIEW

3'-6"4"4"

4"

4'-3"

9"

6'-11"

3'-0"

2"

6"

3" ARROW

7'-8"

3'-11"

7" LOGO

6" 1"

I-90 and I-87

Alumni QuadDowntown Albany

2m

4m

Downtown Campus 3m

3'-6"4" 4"

4'-3"

6" 1"

SIDE VIEW

4"

9"

8'-5"

3'-0"

2"

6"

3" ARROW

9'-2"

5'-5"

7" LOGO

When exiting, include the mileage for destinations that are located more than 1 mile away

Black and white vinyl logocentered in arch

Custom fabricated archcrown painted gold metallic;allow for panel removal

High-performance black vinyl forcopy and graphics;font DIN Schrift Engschrift

Painted metallic gold radius spacer placed above top paneldirectional change

High-performance reflectivewhite vinyl background withhigh-performance black vinyl text

APCO SignBar¨ or equal; modular aluminum sign with interlocking panels; top access for panel removal; windload engineered; adjustable; durable, non-corrosive extruded aluminum components and stainless steel hardware; vandal- resistant screws for posts and wall channel caps; painted white; five-year warranty

4" aluminum square postpainted white; top is capped

Below-grade footingper code; pad perUniversity specifications

NOTE: Signs may be single or double sided

SIGN TYPE: DV-3

FUNCTION: WAYFINDING

PRODUCT: APCO / CUSTOM

CAMPUS: ANY

These signs can be used to support wayfinding to smaller and less public parking lots like those intended for service vehicles, and in situations where the DV-1 and DV-2 sign types may be more than is needed due to the campus size, road speed or number of destinations. They also can be used to indicate the direction to another campus and to convey the distance to that campus.

The modular aluminum post-and-panel signs are painted white and use a custom aluminum cap painted gold. Horizontal spacers painted metallic gold are used to separate the header and each of the direc-tional groupings (left, then right, then straight ahead as needed) from each other. The University logo is applied to the cap with surface-applied high-performance black and white reflec-tive vinyl.

The modular sign holds inter-changeable high-performance white reflective vinyl panels to allow easy updating by the University Sign Shop. Lettering is rendered in high-performance black vinyl in the DIN Schrift Engschrift typeface, and high-performance black vinyl is also used for the arrow and any “Circle P” parking symbol graphics.

Each sign can support wayfinding to up to seven destinations, however a blank panel is recommended above a change in direction. If a particular location requires wayfinding to more than seven destinations, a second sign can be installed approximately 60 feet beyond the first to wayfind to the remaining destinations. Destinations should be divided by directional groupings between the two signs, with the left-hand directional destinations listed on the first sign (or left-hand and then right-hand directional destinations if space permits).

Page 43: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 3N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

V E H I C U L A R L E D M E S S A G E S I G N

Gold Metallic Painted Aluminumto match granite

MP04761Steel Wool

WhiteMP41306SPSignal Jet Black

Bethel WhiteGranite veneer

NE - Vehicular LED Message Sign Scale: 1/2"=1'-0"

- W E L C O M E -

NEW STUDENTS

AND FAMILIES

ISOMETRIC VIEW

- W E L C O M E -NEW STUDENTSAND FAMILIES

1'-4"

14'-3"

Fabricatedaluminumcurved capand columncap paintedto matchgranite veneer

SIDE VIEW

Granite

Granite

Fabricatedaluminumcurved capand columncap paintedto matchgranite veneer

This sign is double-sided with thelogo and LED unit appearing on opposite face in same manner.

Logo engraved/recessed into granite;infill painted Steel Wool;uppermost surface painted white

2-sided Hi-Tech Hi-Res Sun*Blazer - Single Color LED unit HRSBSC23x128 with up to 300' visibility (or equal);programmable message board;data to be sent via phone line;6" character; 3 LEDs/pixel; .9" pitch; Amber display color; high contrast black face with no plexiglass cover; front hingeaccess; 90-110 degree total visible angle at daytime for LED half-intensity angle of 70-160 degrees at nighttime; LED pixeldesign to be cluster panel with all ULapproved materials; pixel luminous intensityto be 4.300 mcd; display brightness to be3,720 nit (cd/m2); 100,000 hours ratedLED life; LED drive current to be 20 milli-ampw/ Constant Current driver 1C; per pixelDC wattage of 0.42 watt (max).; PC operatingsoftware w/ Win98; average operatingwattage of 922 watts per side; supply ACpower (w/1.5x S.F.) 110 V AC @ 25 amp;LED pixel size of 1"; built-in surge protectors; require a dedicated circuit breaker (no sharing)

Custom signwith 1/2" graniteveneer and aluminumfabricated curved fillerpanels

Aluminum square cross-section bars pin-mountedpainted MP Gold Metallic

LED ventilation

Below grade footingper code; pad per UniversityspecificationsAbove-grade apron

Engraved recessedpanels with bevel edgecentered within columnbase

Communications Stub

Electrical Stub

10'-7"

TOP VIEW

1"

1"

1"

2'-1 1/4"

3'-3 1/2"

1'-5 1/2"

1 1/4"

1 1/4"

1 1/4"2 1/2"

2 1/2"8 3/4"

1'-1 1/4"

2'-5"

1'-4"

1'-3"

1/2"

1'-7"

3'-3 1/2"

2'-1 1/4"

1'-10" 1'-10"

1 1/4"

7'-11 3/4"

6"

1'-4"

1" 1"

1"

1'-2 1/2"1'-6 1/2"

- W E L C O M E -NEW STUDENTSAND FAMILIES

SIGN TYPE: NE

FUNCTION: PROGRAMMABLE ELECTRONIC DISPLAY

PRODUCT: HI-TECH / CUSTOM

CAMPUS: ANY

This two-sided granite veneer sign with a built-in LED display is used to announce short-term events such as sport events, alumni weekends, ori-entation week, and museum show-ings. University Athletics would like one sign to be placed along Western Avenue to advertise sporting events. Another identical sign could be located along Washington Avenue to advertise University-wide activities.

The sign uses an engraved University logo on a granite veneer monument with painted aluminum accents on the side pillars, and a fabricated aluminum curved cap and column cap painted to match the granite veneer. The infill of the logo is painted gray and the logo itself is painted white. The aluminum accents are painted gold.

The two-sided, single-color LED display can show up to three lines of text, and the programmable mes-sage board can be updated via phone line using PC software. One or two (alternating) messages can be presented at a time. Motion and special effects can be used as an option where allowed by zoning.

Page 44: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 4N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

MP21249Gold Metallic

Painted Aluminumto match granite

MP04761Steel Wool

WhiteMP41306SPSignal Jet Black

White BethelGranite veneer

NE-IC-1 - Campus Identifier (Uptown) Scale: 1/2"=1'-0"

110-120 VAC

1"

1'-7"

1 1/4"

1 1/4"

1 1/4"2 1/2"

2 1/2"

1'-1 1/4"

2'-5"

2'-1 1/4"

1'-10 1/2"

2'-4"

SIDE VIEW

White Bethelgranite veneer

White Bethelgranite veneer

Hydrel 6100 SeriesIn-grade up-lightfor each sign face,controlled by atime clock or photo-electric switch.Consult manufacturer'swebsiteshttp://www.hydrel.comhttp://www.lithonia.com/floodlightingfor technical and installationspecifications.

Fabricatedaluminumcurved capand columncap paintedto matchgranite veneer

Aluminum square cross-section barspainted MP Gold Metallicpin-mounted

Communications StubElectrical Stub

- W E L C O M E -NEW STUDENTSAND FAMILIES

1 4 0 0

1"

1"

1'-5"

8 1/2" CH

6" CH

4 1/2" CH

1/2"

1'-7"2'-5"

1'-10"1'-10"

10'-7 1/4"

1 1/4"

11'-6"

7'-5"

4'-11"LOGOTYPE

6"

1'-4"

8 1/2"

Below-grade footing per code;pad per Universityspecifications

Engraved recessed panels withbevel edge

Street address etched into granite;infilled black, DIN Schriften Engschrift font

Logo sandblasted into face.Recessed area to be painted withblack paint.Raised areas to be painted white.

Division in stone face if necessary.Tight seam.

These letters lasted into faceand infill painted jet black

Aluminumchannel letterspainted gold metallic;1" returnspainted gold metallicpin mounted flush

Custom signwith 1/2” garniteveneer and aluminumfabricated curved fillerpanels

LED ventilation

2-sided Hi-Tech Hi-Res Sun*Blazer - Single Color LED unit programmable message board;Amber display color; high contrast black face with no plexiglass cover; front hingeaccess; supply AC power (w/1.5x S.F.) 110 V AC @ 25 amp; LED pixel size of 1"; built-in surge protectors; require a dedicated circuit breaker (no sharing)

Above-grade apron

Above-grade apron

2'-1 1/4"

2'-4"

14'-6"

TOP VIEW

Fabricatedaluminumcurved capand columncap paintedto matchgranite veneer

V E H I C U L A R L E D M E S S A G E S I G N ( U P T O W N C A M P U S )

SIGN TYPE: NE-IC-1

FUNCTION: PROGRAMMABLE ELECTRONIC DISPLAY

PRODUCT: HI-TECH / CUSTOM

CAMPUS: UPTOWN

This two-sided granite veneer sign with a built-in LED display is used to announce short-term events such as sport events, alumni weekends, orientation week, and museum showings. The are two signs located at the two main entrances of the Uptown campus; Washington Ave and Western Ave.

The University logo is sandblasted on a granite veneer monument with gold painted aluminum accents on the side pillars, and a fabricated alu-minum curved cap and column cap painted to match the granite veneer. The infill of the logo is painted gray and the logo itself is painted white.

The LED display can show up to three lines of text, and the program-mable message board can be updat-ed via phone line using PC software. One or two (alternating) messages can be presented at a time. Motion and special effects can be used as an option where allowed by zoning.

Page 45: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 5N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

V E H I C U L A R S T R E E T I D E N T I F I E R

MP41306SPSignal Jet Black

Match vinyl toMP21249 Gold Metallic

White EngineerGrade Reflective Vinyl

A 2" TelesparUnistrut square post(or Western HighwayProducts post) could beused for this sign.

2"

BRACKET DETAIL 1

BRACKET DETAIL 2

SIGN BLADE DETAIL not to scale:size of blade is determined by the copy length

TOP VIEW

#990F SUPR-LOK CROSS90 degree cross separator for use with any post cap(available from Hall Sign, 800 284-7446, www.hallsign.com)

#97SQF SUPR-LOK CAP 2" Square Post Mount Bracket For Flat Blades(available from Hall Sign, 800 284-7446, www.hallsign.com)

Below-grade per code

E. UNIVERSITY DR

washington AVE

TRI-CENTENNIAL DR

Aluminum bladepainted MP SignalJet Black

Icon is surface appliedgold metallic vinyl with white reflective

DIN Schrift Engschrift font;white reflective vinyl

See bracket detail 1;paint Black

See bracket detail 2;paint BlackStreet Name: Trajan Bold font;

white reflective vinyl

2" square post painted Black (Telesparª QuickPunchUnistrut post or similar)

3" CH

8'-0"

6"

3" logo

1 5/8" CH

3'-6"(varies)

3'-8"(max length)

1 1

/2"

1 1

/2"

1 1

/2"

1 1

/2"

IS - Vehicular Street Identifier Scale: 1/2"=1'-0"

Since the maximum sign bladelength is 3'-8", long names will need to be abbreviated, letter space tightened and/or letter compressed to the minimim amount necessary. If the copy needs to be compressed more than 75% in order to fit, the cap height can be reduced in increments of 1/2"; no smaller than

SIGN TYPE: IS

FUNCTION: IDENTIFICATION

PRODUCT: CUSTOM

CAMPUS: ANY

These aluminum blade signs are placed at street intersections on University campuses, and help rein-force the University identity. They should be placed at all intersections, replacing existing street signs where they exist.

The signs are painted black and use white reflective vinyl for the street name. The University logo is applied with gold and white reflective vinyl. Street names are rendered in the Trajan Bold typeface, while the street type (“DRIVE,” “AVE,” etc.) is in capital letters in the DIN Schrift Engschrift typeface. The 2 1/4–inch square posts are painted black.

Page 46: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 6N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SVerified 5/18/16

MP21249Gold Metallic

Black White

TV-1 - Vehicular Temporary Message Sign in ground

Scale: 1/2"=1'-0"

TV-2 - Vehicular Temporary Message Sign freestanding

TV - Vehicular Temporary Message Sign freestanding

Parking

Parking

Parking

3'-2"

4'-10"

2'-0"

2'-0"

8"

1"

Two right angle bent 0.080 aluminum panelsbonded with a permanent adhesive,grind and smooth edges, paint gold metallic (faces and sides).

Attach header to frame using stainless steelcountersunk screws and permanentadhesive bond

Front of sign

Sign panels attach to frame through tabsfrom back and fit inside frame.

4 1/2"

5 1/2"

1'-5"

Aluminum header permanentlyattached into square frame;painted gold metallic (see detail)

Standard 1" square frame powdercoated white

Small stainless steel screws attach signfacethrough frame tabs in back

Temporary cut vinyl message is mounted on removable 24" x 36" 0.030 aluminum panel paintedwhite. Graphics either match to Black or Pantone 269; use the DIN Schrift Mittelschrift font (recommend4"-5" cap heightfor best readability)or custom logo.

Frame pushed into ground(or freestanding in TV-2)

Silk-screened logo with blackand white centered in header

28"

25”16.75”

27"

12.5”

?”

?”

25"

23"

50"

6”

3/4”

3/8”

3/8”

TV-1-2 TV-1-2 TV-1-2

TV-1-2

TVTVTVTVSIDE VIEW

DETAIL (nts)

BACKFRONT/BACKDETAIL (not to scale)

SIDEINSIDE

Continuousstainless steelhinge

Stainless steelchain attached tounderside of bottomcrossrail

Minerva logocenter on arch

Sides are 14” long; bottom is 20” wide;attached w/ VHB tape and riveted in 3 spots

Aluminum; powder coatedwhite

Mount center w/ a tamper bolt and nylon lock nut w/ nylon washer as a spacer between sign face; arrow rotates on center point w/ a bolt and nut to lock the arrow

White corplas insert;use the DIN SchriftMittelschrift font

Vinyl arch in 3M Metallic Gold

All bolts/screws are to be tamper resistant(Torx); all fasteners areto be colored to matchthe surface they are mounted on

V E H I C U L A R T E M P O R A R Y M E S S A G E S I G N

SIGN TYPE: TV-1, TV-2

FUNCTION: IDENTIFICATION

PRODUCT: STANDARD REALTY DISPLAY FRAME / CUSTOM

CAMPUS: ANY

These simple aluminum signs can be used to direct traffic during University-sponsored events and to convey event notices and custom messages. They use a one-inch square frame and a detachable aluminum sign panel, both of which are painted white. A permanent alu-minum header is painted gold and silk-screened with the University logo. The message is applied to the detachable sign in black or purple vinyl, in the DIN Schrift Mittelschrift typeface.

Page 47: SIGNAGE & WAYFINDING STANDARDS MANUAL · NEW SIGNAGE AND WAYFINDING SYSTEM PAGE 2:1 SIGNAGE & WAYFINDING STANDARDS MANUAL Revised 6/09/15 INTRODUCTION TO THE SIGN DESIGN CONCEPT Several

S I G N A G E & W A Y F I N D I N G S T A N D A R D S M A N U A L

P A G E 2 : 4 7N E W S I G N A G E A N D W A Y F I N D I N G S Y S T E M : E X T E R I O R S I G N T Y P E SRevised 2/11/16

5’ - 0”

2’ - 6”

5’ - 9”

3’ - 3”

2’- 6"

4’- 6"

2’ - 6”

8”

12”

24”

36”

45˚ 45˚

Map: State University of New York University Centers

Throughout his life, Nelson A. Rockefeller had a profound influence on countless projects and programs across New York State and the United States of America. Throughout his working life Rockefeller held positions in public office. Between 1933 – 1953 he served as a member of the Westchester County Board of Health while also engaged in multiple private ventures, including overseeing a subsidiary of Standard Oil in Venezuela as well as being a board member and eventually board president of the Museum of Modern Art. In the 1950’s Rockefeller gained more prominence by becoming Under Secretary of Health, Education and Welfare under President Dwight D. Eisenhower from 1953 - 1954 and then by being elected to four terms as Governor of New York State from 1959 to 1973. Rockefeller served as the 41st Vice President of the United States, under President Gerald Ford, from 1974 - 1977.

While the SUNY system was initially created under Governor Thomas E. Dewey in 1948, was elevated into being the nation’s largest comprehensive system of public higher education by the vision of Governor Nelson A. Rockefeller. During his four terms as governor, Rockefeller brought about large changes and expansions to the SUNY system, including massive construction projects at the four “University Centers” located in Albany, Buffalo, Binghamton, and Stony Brook. Other improvements occurred system-wide with the overarching goal of providing educational opportunity to war veterans, women, students of color, and the quickly aging children of the post WWII “baby boom.” Today the SUNY system Rockefeller helped create to educate the baby boom generation is now educating their children.

Photo: Governer Nelson Rockefeller (center), Times Union

Sources:Morris, Joe A. Nelson Rockefeller, A Biography. New York: Harper & Brothers, 1960. Print.

University at Bu�alo

University at Albany

Binghamton University

Stony Brook University

Aluminum RAL 8016Mahogany Brown

RAL 9011Graphite Black

4”

6”

ISOMETRIC VIEW - NOT TO SCALE

ISOMETRIC VIEW - NOT TO SCALE SIDE VIEW

SIDE VIEW

Sample graphic to be applied for PI-1 locations.

6”x 36”x 1/2” lower paneloptional to accompany top panel.

3”x3” post made of aluminumwith optional powder coat.

3”x3” aluminum orwooden post.

8”x 12”x 1/2” panelfabricated usingCustom High PressureLaminate.

24”x 36”x 1/2” panelfabricated using Custom High Pressure Laminate.

Information panel bolted to 6”x6” black powder coated aluminum mounting plate.

Sample graphic to be applied for PI-2 locations.

PI-1 - Information PedestalScale: 2” = 3’ - 0”

PI-2 - Information PlateScale: 2” = 3’ - 0”

Printed Area DimensionsPrinted Area Dimensions

PI-3 - Plant Identifier

ISOMETRIC VIEW -

SIDE VIEW -

Scale: 1” = 1’ - 0”

1” aluminum post,9-12” off ground surface

4” x 6” panel,full-color, HighPressure Laminateor other water-proof,UV-resistant material,bolted to aluminumbacking

Honey LocustGleditsia triacanthos

Height: 20 - 30 meters (66 - 98 ft.)

Lifespan: 120 - 150 years

Natural Region: Central North America

Sample graphic to be applied for PI-3 locations.

P E D E S T R I A N I N F R O M A T I O N - P O S T & P A N E L

SIGN TYPE: P1-1, P1-2

FUNCTION: INFORMATION

PRODUCT: SH Immersive Environments

CAMPUS: ANY

These informational signs are located along the path around Indian Pond, at select locations around the University Fountain, and within the Heritage Garden located south of Indian Quad. They feature informa-tional panels with historical photos, information about the history of the campus, and explainations of plant life and garden plantings within the University’s Heritage Garden.

P1-1 signage panels are 8”x12”, and are cased in Custom High Pressure Laminate afixed to a 3”x3” wooden or aluminum post.

P1-2 signage panels are 24”x26” and are afixed to two, 3”x3” powder-coated aluminum posts, with an optional 6”x36” panel. Signs located around Indian Pond are powder coated Mahogany, while other loca-tions feature a black powder coating.

P1-3 signage are plant/tree identifier

signage to be installed in gardens and planters in the uptown and downtown campus. Each 4” by 6” sign will identify a specific species and give information about each species on campus, including a QR code and a photo.