simatic field pg m3 - w5.siemens.com · integrated simatic interfaces for s5 and s7 pre-installed...
TRANSCRIPT
© Siemens AG 2011. All Rights Reserved.
SIMATIC Field PG M3The ready-to-run,
robust industrial notebook
for automation professionals
© Siemens AG 2011. All Rights Reserved.
Industry Sector
The standard in terms of compactness, robustness and speed for mobile engineering
Brilliant, high resolution 15,6“ display in
widescreen format 16:9, optimized for
current and future engineering tools
Integrated SIMATIC interfaces saves
additional adapters
Robust enclosure from high grade material
suitable for industrial use
High performance Intel® processors provide
efficient work speed
© Siemens AG 2011. All Rights Reserved.
Industry Sector
The SIMATIC Field PG M3 is light-weight, robust and compact
The robust industrial notebook for
mobile use
Elegant, robust enclosure
Light-weight yet robust magnesium spray cast
EMC shielded enclosure *)
Rubber protected corners
Dust sealed interfaces
Robust carrying handle
Light-weight, space saving power supply
*) according to both, office and industriel standards
© Siemens AG 2011. All Rights Reserved.
Industry Sector
The SIMATIC Field PG M3 is performing and persistent
State-of-the-Art PC Technology
High performance Intel® processor with low
energy consumption
2,4 GHz Core i5-M520 or
1,86 GHz Dual-Core P4500
Up to 8 GB DDR3 RAM – 1066 *)
Up to 500 GB hard drive, fast changeable
Bright, high resolution 15,6“ display in 16:9
widescreen format
Full HD (1920 x 1080, recommended) **) or
HD ready (1366 x 768, larger characters)
Industrial WLAN (802.11 a, b, g, n)
Powerful Li-Ion battery
> 3 hours of mobile use*) only Windows 7 64 bit (in preparation) **) optimized for TIA Portal software
© Siemens AG 2011. All Rights Reserved.
Industry Sector
The SIMATIC Field PG M3 already includes the most important interfaces for automation professionals
Integrated SIMATIC interfaces
2 GB Ethernet interfaces
(2 independent MAC/IP addresses)
PROFIBUS DP / MPI
SIMATIC memory card
SMC and MMC
Serial interface COM1 (V.24)
Optional S5 interface (TTY)
S5 online incl. S5-AG cable
S5 EPROM adapter
Standard PC interfaces
DVI-I monitor interface
Audio In/Out jacks
5 high current USB interfaces
(1x for Bluetooth adapter)
© Siemens AG 2011. All Rights Reserved.
Industry Sector
The SIMATIC Field PG M3 is available in three hardware variations
500GB S-ATA hard drive500GB S-ATA hard drive250GB S-ATA hard drive
DL multi standard DVD RWDL multi standard DVD RWDL multi standard DVD RW
3 GB DDR3 RAM (1x 2 GB DDR3 RAM, 1x 1 GB DDR3 RAM)
3 GB DDR3 RAM (1x 2 GB DDR3 RAM, 1x 1 GB DDR3 RAM)
2 GB DDR3 RAM(1x 2 GB DDR3 RAM)
15,6“ Widescreen Display
optional:
HD ready (1366 x 768)
Full HD (1920x1080) *)
-
Intel Core i5 prozessor, 2,4GHz
Premium
15,6“ widescreen displayoptional:
HD ready (1366 x 768)
Full HD (1920x1080) *)
S5 online intewrface and S5
EPROMMER, incl. S5 AG cable and
S5 EPROM adapter
Intel Core i5 processor, 2,4GHz
Premium with S5
15,6“ Widescreen Display
optional:
HD ready (1366 x 768)
Full HD (1920x1080) *)
-
Intel P4500 processor, 1,86GHz
Standard
SIMATIC Field PG configurator for selection support (Link)
*) optimized for TIA Portal software
© Siemens AG 2011. All Rights Reserved.
Industry Sector
The SIMATIC Field PG M3 is ready-to-run –with pre-installed software
STEP 7 Professional
STEP 7 Basic/Basis
STEP 7-Micro/Win
WinCC flexible Advanced
STEP 5 (pre-installed with Win XP)
SIMATIC SW pre-installed Operating Systemes
32 bit:
Windows XP Prof. Engl. MUI
Windows 7 Ultimate
64 bit:
Windows 7 Ultimate **)
Nero Essential 7 *)
Power DVD V7 *)
SIMATIC IPC Image &
Partition Creator(optional)
Application Software
*) only Windows XP**) in preparation
SIMATIC Field PG configurator for selection support (Link)
© Siemens AG 2011. All Rights Reserved.
Industry Sector
Flexible SIMATIC Software licensing for the SIMATIC Field PG M3
STEP 7 Professional, STEP 7 - Micro/WIN,
WinCC flexible Advanced, STEP 7 Basic
and STEP 5
STEP 7 Professional, STEP 7 - Micro/WIN,
WinCC flexible Advanced, STEP 7 Basic
Powerpack license: STEP 7 Professional;
Upgrade licenses: STEP 5,
WinCC flexible Advanced
Upgrade licenses: STEP 7 Professional, STEP 5,
WinCC flexible Advanced
Trial license: STEP 7 Professional,
WinCC flexible Advanced
SIMATIC Software License Packages Description
New licenses for current versions of
software
(5 products)
New licenseswith S5
New licenses for current versions of
software
(4 products)
New licenseswithout S5
Switch and upgrade existing
STEP 7 license to current
STEP 7 Professional license
Powerpack
Upgrade the license to
new version of software
Upgrade
Free of charge, limited period of
use: 14 – 21 days
Trial
License variations
© Siemens AG 2011. All Rights Reserved.
Industry Sector
SIMATIC Field PG M3 – The ready-to-run, robust industrial notebook without alternative
State-of-Art PC Technology
Robust enclosure and space saving power
supply
Integrated SIMATIC interfaces for
S5 and S7
Pre-installed SIMATIC automation software
Optimized for mobile use at configuring, commissioning, service and maintenance for your automation equipment
© Siemens AG 2011. All Rights Reserved.
Industry Sector
World wide customer support concept for the SIMATIC Field PG M3
Online support
The fastest way: www.siemens.com/automation/service&support
24 hours / 7 days available
Repair center
… be it that something fails
Authorized repair centers worldwide close to you
Extended service
36 month service option
Free of charge repair
Return shipment to customer
Repair time 3-5 working days
© Siemens AG 2011. All Rights Reserved.
Andreas Czech
Marketing Manager
I IA AS S MP1
Gleiwitzer Str. 555
90475 Nürnberg
Phone: +49 (0)911/895-2690
E-Mail: [email protected]
Thank you for your attention!