simple controllerca01.smcworld.com/catalog/new-products-en/mpv/19-e738...communication cable˜...
TRANSCRIPT
170170
150
150
140140
144
144
6363
8686
Simple Controller
Space saving
Reduced setting laborOnly the speed and force need to be set
Reduced wiring laborOnly 2 inputs/outputs*1
*1 Per axis
End to end2-point operation is
possible without programming!
For 4 Axes
Footprint 79%Reduced byup to approx. Footprint 73%
Reduced byup to
Single-axis controller (LECP6) x 4 controllers 4-axis controller (JXC73/83/93)
Applicable actuatorLEY SeriesSize 16, 25
INFORMATION
JXCm4-X119-E738
PC
�Power supply plug(Accessory)
Option
Communication cable�
�Actuator cable
�USB cable
USB driver∗ Download from SMC’s website:
https://www.smcworld.com
�Communication cablefor controller setting
Power supplyfor I/O signal
24 VDC
PLC
Provided bythe customer
�Electric actuator/Rod type (Ordered separately)
(Ordered separately)∗ Dedicated actuator cables
for the simple controller are required.
Simple Controller
Power supplyfor driver24 VDC
Provided bythe customer
Motor top/parallel type In-line motor type
∗ This software is only used when detailed setting is required. Please contact SMC for details.
�Simple controller setting software
I/O cable�(Accessory)
JXC-W2A-C
LEC-W2-U
System Construction
1
JXCm4-X1
Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPANPhone: 03-5207-8249 Fax: 03-5298-5362https://www.smcworld.com© 2020 SMC Corporation All Rights Reserved
Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.
D-G
Safety Instructions Be sure to read the “Handling Precautions for SMC Products” (M-E03-3) and “Operation Manual” before use.
Screw mounting
∗ Mountable on DIN rail (35 mm)
98.8
1.6
3 x 4.4
4.4
6.4
698
(96.3)
85.6
PWR: Power supply connector
62.6
97.2
(99)
(12.
4) C
onne
ctor
unl
ocke
d
5.7
32.4
50.6
Up button
Set button
Down button
SI: Serial I/O connector
Parallel I/O connector
Axis 1 motor connector
Axis 3 motor connector
Axis 2 motor connector
Axis 4 motor connector
Bracket
Controller part number label
Actuator part number label
Specifications
Dimensions
Model JXC4-X1Number of axes 4 axes
Compatible motor Step motor (Servo/24 VDC) 42/28/20
Power supply Power voltage: 24 VDC ±10%
Power consumption Power consumption depends on the actuator size connected. Refer to the actuator specifications for further details.
Operating temperature range 0 to 55°C (No freezing)
Operating humidity range 90% or less (No condensation)
Insulation resistanceBetween all external terminals and the case
50 MΩ (500 VDC)
Weight 300 g (DIN rail mounting), 390 g (Screw mounting)
Applicable actuator LEY Series (Size 16, 25 * Excluding the LEYG)
For 4 Axes
Simple Controller JXC4-X1