simplimet 3000 - buehler simplimet 3000 mounting press simplifies mounting in any lab with fully...
TRANSCRIPT
SimpliMet™ 3000Automatic Mounting Press
Solutions for Materials Preparation, Testing and Analysis
BUEHLER [email protected]
BUEHLER [email protected]
BUEHLER [email protected]
SimpliMet™ 3000 Automatic Mounting PressThe SimpliMet 3000 mounting press simplifies mounting in any lab with fully autmatic operation and a variety of mold sizes. The electrohydraulic press with touch pad controls allows operators to attend to other tasks during the mounting cycle.
• Touch pad selection of pressure, temperature, heating time & mount size
• Stores up to 25 methods• Thermoplastic function for linear cooling• Automatic mold sensing• Cycle completion announcement
Automatic Operation
• Insulated mold closure keeps heat away from the exterior
• Safe, low voltage controls prevents exterior surfaces from getting hot during the mounting process
Safety
• Mold assemblies available in 1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm and 50mm Diameter
• Quick change system allows for fast and convenient mold change
Versatility
•Wipe clean touch pad and case
Cleanability
Changing mold assemblies is quick and easy due to the lower ram dovetail connection design.
Insulated bayonet closure system allows for quick and safe operation.
Compression mounting produces a reliable and consistent specimen mount.
A full range of specimen mounts, from 1-2in [25-50mm] in diameter, can be molded simply by changing the mold assembly.
Visit our website at www.buehler.com for more information.
Specifications SimpliMet™ 3000
Operation Automatic electro-hydraulic
Power Source 85-264VAC, 50/60Hz, 1 phase
Molding Pressure 1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments
Molding Temperature 120 - 360oF [50 - 80oC] in 20oF [10oC] increments
Heating Power 1500Watt @ 115/230VAC
Heating Time 0 - 20 minutes in 10 second increments
Cooling Time 0 - 30 minutes in 10 second increments
Mold Type Cylindrical, including upper and lower rams and duplex mold spacer
Closure Type Insluated bayonet with piston indent
Mold Diameters 1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm
Touch-pad ControlsOn/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods
Units of Measure Imperial or Metric
Water Flow Rate 0.5gal/min [2ℓ/min] minimum
Water Pressure 45-75psi [3-5bar]
Control Voltage 24VDC
Method Programmability 4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods
Preload Pressure 0 - 400psi [0 - 30bar] in 50psi [5bar] increments
Thermoplastic FunctionAutomatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion
Compliance In accordance with EC Directives
22.5in [571mm]
21.5in[546mm]
16in[406mm]
Approx. Weight: 73 lbs [33kg]
• Fully automatic electro-hydraulic press• Programmable database allows user to store 25
mounting methods• Duplex mold capabilities• Molds available in a variety of sizes (sold separately)
Part Number Voltage/Frequency
20-1435 85-264VAC, 50/60Hz
Accessories 20-2401 1in ID Duplex Mold Assembly20-2402 1.25in ID Duplex Mold Assembly20-2403 1.5in ID Duplex Mold Assembly20-2404 2in ID Duplex Mold Assembly20-2405 25mm ID Duplex Mold Assembly20-2406 30mm ID Duplex Mold Assembly20-2407 40mm ID Duplex Mold Assembly20-2408 50mm ID Duplex Mold Assembly560025 2, 3 UKE-S recirculating system w/ automatic controls, 60ℓ891061 2, 3 Fine filter for water connections
SimpliMet™ 3000
20-3381-070 EpoMet™ F, fine filled epoxy, 4 lbs [1.84kg]20-3381-160 EpoMet F, fine filled epoxy, 10 lbs [4.5kg]20-3381-400 EpoMet F, fine filled epoxy, 25 lbs [11.3kg]20-3380-064 EpoMet G, regular filled epoxy, 4 lbs [1.8kg]20-3380-160 EpoMet G, regular filled epoxy, 10 lbs [4.5kg]20-3380-400 EpoMet G, regular filled epoxy, 25 lbs [11.3kg]20-3100-080 PhenoCure™ Black, wood flour, 5 lbs [2.3kg]20-3100-400 PhenoCure Black, wood flour, 25 lbs [11.3kg]
20-3200-080 PhenoCure Red, wood flour, 5 lbs [2.3kg]20-3200-080 PhenoCure Red, wood flour, 25 lbs [11.3kg]20-3300-080 PhenoCure Green, wood flour, 5 lbs [2.3kg]20-3300-400 PhenoCure Green, wood flour, 25 lbs [11.3kg]20-8185-002† Release Agent, 2oz [6mℓ]20-8185-016† Release Agent, 16oz [470mℓ]20-8185-032† Release Agent, 32oz [950mℓ]20-3048 Powdered Mold Release, 1.6oz [45g]
† Restricted article, requires special packaging
Consumables for Compression Mounting
Ordering Information
© 2014 BUEHLER, a division of Illinois Tool Works Inc. Printed in U.S.A. FN01464_0514
BUEHLER Worldwide Headquarters41 Waukegan RoadLake Bluff, Illinois 60044-1699 USAP: (847) 295-6500www.buehler.com | [email protected]
BUEHLER [email protected]
BUEHLER [email protected]
BUEHLER United [email protected]
BUEHLER [email protected]
BUEHLER [email protected]
BUEHLER [email protected]
BUEHLER [email protected]
For a complete listing of consumables, visit our website at www.buehler.com or refer our Product Catalogue. Buehler continuously makes product improvements; therefore technical specifications are subject to change without notice.
Shop online at www.buehler.com. (US, DE, FR and UK only)
Buehler products are used throughout the world in manufacturing facilities, quality laboratories, and universities to analyze all types of materials, including:
Other products from Buehler:
Sample preparation equipment includes: abrasive sectioning, precision cutting, mounting, grinding & polishing, electronics and petrography.
Consumables for sample preparation equipment include: abrasive wheels, precision blades, compression mounting compounds, castable systems, silicon carbide abrasive papers, diamond grinding discs, polishing cloths, diamond polishing suspensions, and final polishing suspensions.
Imaging & analysis and hardness testing equipment include: microscopes, cameras, imaging & analysis software, hardness testers, fixtures, test blocks and hardness software.
• Aerospace• Automotive• Biomedical & Medical
• Ceramic, Plastics, Composites• Education, Defense, Government• Electronics & Optics
• Energy & Construction• Petrography• Primary Metals
Buehler Worldwide Locations DistributorsLaboratoryService
Buehler Americas
Lake Bluff, IL, USWorldwide Headquarters
Binghamton, NY, US
Norwood, MA, US
Whitby, ON, CA
Buehler Europe
Coventry, UK
Dardilly, FR
Düsseldorf, DE
Esslingen, DE
Buehler Asia
Hong Kong, CN
Shanghai, CN
SalesManufacturing
Tokyo, JP