simulate design create with moldflo · if your email reader doesn't support html as displayed...
TRANSCRIPT
If your email reader doesn't support HTML as displayed above, please click here.
Simulate ... Design ... Createwith Moldflow
Introduction
This morning half-day seminar offers participants the opportunity tounderstand what drives companies to reach higher productivity andprofitability by way of engineering simulation. Engineering simulation indeveloped countries is no longer an option but has become a pre-requisite tool for companies to gain an unrivaled advantage in today’scompetitive market for developing and launching new products rapidly,without sacrificing quality, and yet reduce defects and the need forreworks, while increases the company profitability.
Objectives
In this morning seminar, we will be presenting on how companies useAutodesk Moldflow to design plastic injected parts to achieve targeted costwith different molding processes. We will also present how Partmanufacturers use Autodesk Moldflow to influence process optimizationrather than being limited by design constraints.
Who should attend
Mould makers, moulders, companies engaged in design andmanufacturing activitiesSenior management of companies wanting to explore simulation asone of the key competitive advantage toolsEngineers and CAE Engineers who wish to understand how they canbetter design plastic products with state of the art simulation tools.
About the speaker
Mr Terence Chan, the founder, Chairman and CEO of CAD-IT Consultants (Asia) Pte Ltd,has been instrumental in establishing CAD-IT as the leading PLM Technology provider inAsia Pacific. CAD-IT is headquartered in Singapore and with 10 offices in Singapore,Malaysia, China, Thailand and UK and 2 factories based in Shanghai and Suzhou Taicangrespectively (Moldfactory).
CAD-IT Consultants has won numerous awards including Singapore SME1000, Top 50fastest growing SMEs, Singapore Enterprise 50 and Singapore Prestige Brand CIMBRegional Brand. Terence also served on the Management and working committees forASME, NTU MBA Alumni and NASA. Terence graduated from Queensland University ofTechnology (QUT) with M. Eng Science, MBA from Nanyang Technological University (NTU)and BSc (EE) from National University of Singapore (NUS). He is also a Certified PublicAccountant (CPA).
Information
Dates : 15 November 2013 (Friday)
Time : 8:30 AM - 1:30 PM
Venue : Autodesk Asia Pte Ltd,
: Training Room, 3 Fusionopolis Way #10-21 Symbiosis, Singapore 138633 ( view map )
Agenda
8:30 am Registration
9:00 am Welcome Address by CAD-IT Consultants
9:30 amMarket Innovative plastic products faster using Moldflow Simulation –Injection Molding
10:20 am Tea break / Networking
10:40 amMarket Innovative plastic products faster using Moldflow Simulation –Special molding processes
11:20 am Moldflow deployment at MoldFactory(China)
12:00 pm Networking Lunch
• Register online for this complimentary one-off seminar.
• Seats are limited and allocated on a first-come-first-serve basis. So please book your place early to avoid disappointment.
• CAD-IT Consultants reserves the right to cancel or postpone any event due to unforeseen circumstances.
For enquiries, please call (65) 6508-7575 or email to [email protected].
About CAD-IT Consultants
Formed in 1991, CAD-IT Consultants (Asia) Pte Ltd is a leading global ISO 9001:2008 certified global PLM and educationprovider providing world-class solutions that enable companies to achieve greater product innovation, quality and productivitywith reduced lead time and costs. Our priority is in building mutually successful and long term partnerships with our customersand partners.
CAD-IT has received more than 70 International Awards for marketing/ service excellence. Among its most recent accolades arethe KPMG's Enterprise 50 Awards 2012, Asia Pacific Entrepreneur Award (APEA) - Outstanding Entrepreneur Award 2012 and2010, APEA Most Promising Entrepreneur Award 2009, the Singapore Prestige Brand Awards (SPBA) - Established BrandAward 2012, 2012, 2010, Regional Brand Award 2012.As an exclusive partner of ANSYS, Inc. in the ASEAN region, CAD-IT has a proven track record of success, winning 11 ANSYSOutstanding Performance Awards since 1996 for its excellence in sales, marketing, training, consulting and technical support ofthe entire range of ANSYS solutions.
CAD-IT Consultants’ suite of PLM solutions include ANSYS (Multiphysics FEA/CFD), Autodesk Moldflow (Plastics CAE), GoldfireInnovator (Innovation Process Management), Cortona3D (3D Technical Documentation), Mentor Graphics Valor DFM & ValorMSS (Complete Manufacturing Execution Suite), Stampack and Deform (Metal Forming CAE).
Since February 2010, CAD-IT has partnered the Singapore Workforce Development Agency (WDA) to offer Advanced Certificatecourses in PLM and Engineering Simulation, under the Workforce Skills Qualifications (WSQ) framework, with the charter toupgrade the technological capabilities of organizations in Singapore so as to enable them to undertake high value-add design,engineering, manufacturing and R&D activities.
CAD-IT Consultants (Asia) Pte LtdHQ: 159 Sin Ming Road #03-05 Amtech Building Singapore 575625
Tel: (65) 6508 7575 Fax: (65) 6454 3766 Email: [email protected]
www.cadit.com.sg
Bringing you tomorrow’s technology… today!
We respect your privacy. If you wish to unsubscribe from our mailing list, please click here.