sinterlube alloy bushings sinterlube® alloy bushings the innovative upgrade to graphite plug...
TRANSCRIPT
READY
SinterLube® Alloy BushingsThe Innovative Upgrade to Graphite Plug Bushings
THE INNOVATOR OF OUR INDUSTRY®
A Complete Line for Dies and Molds
U.S. and International Patents Pending
2
After years of research and manufacturing process development, READYTechnology proudly announces its latest and most dramatic contribution to ourindustry – the SinterLube
®Alloy Bushing. This revolutionary product requires
no lubrication during production, yet it maintains its initial geometry and under-goes negligible wear, even after millions of press cycles.
Simply put, SinterLube® outperforms the competition. Try SinterLube® for yourselfand discover why this revolutionary bushing should become the standard foryour tooling.
The Secret of SinterLube®
Our key breakthrough in developing the product was the discovery of an alloymaterial having good sliding lubricity and hardness, which we then added to thebronze powder of our sintered bushings. Properly combined, the dispersed particlesof the alloy remain disconnected to the bronze micro structure when sintered, provid-ing lubricity and hardness without harming the mechanical properties of the bronze.This results in a wear resistant micro structure which outperformed every competitor’sbushing we tested.
The graph (left) compares the performance of a commercially available bronzebushing with graphite plugs to our SinterLube® Bushing. We life tested both bushingsat the same time; they were mounted in a split punch holder and forced apart by agas spring so that the lateral force on each bushing was identical. We gave theSinterLube® Bushing a single application of lubricant at the start of the test and nolubricant thereafter.
Once the press had cycled over 1.2 million strokes we stopped the test and exam-ined the bushing. Many of the graphite plugs of the competitor’s bushing had extrud-ed, and the inside diameter had grown by .053”. The guide pillar literally rattled inthe bushing hole. The inside diameter of the SinterLube® Bushing was smooth andhad grown only .001”. As you can see from the graph, the SinterLube® Bushing ranabout 100°F cooler than the graphite plug bushing throughout the test, showing bet-ter lubricity.
Comparison Life Tests(Bushings Run Simultaneously in Test Fixture)
.060”
.050”
.040”
.030”
.020”
.010”
0127 238 365 446 536 700 942 1179
163 317 392 467 591 828 1068 1205
THOUSANDS OF CYCLES
WEA
R
Bronze with Graphite Plugs
SinterLubeTM
Bushing
300
250
200
150
100
50127 238 365 446 536 700 942 1179
163 317 392 467 591 828 1068 1205
THOUSANDS OF CYCLES
TEM
PERA
TURE
(F)
Bronze with Graphite Plugs
SinterLubeTM
Bushing
Measurement of Heat
Measurement of Wear
SinterLube® -
The No Maintenance, Self-Lubricating Bushing
READYSinterLube®
Introduction
SinterLube® delivers what no other bushing can:
1. SinterLube® doesn’t merely claim to be self-lubricating, it truly isself-lubricating, and it doesn’t abrade or close in on the guide pinlike ordinary graphite plug bushings.
2. SinterLube® has a tolerance comparable to precision guiding asopposed to the liberal tolerance of ordinary graphite plug bushings.
3. Unlike the competition, with SinterLube®, there’s virtually no wear,even in the toughest applications.
SinterLube® Bushings wear less and run cooler thanordinary graphite plug bushings.
3
But There’s More:
Features
In addition to its attractive silver exterior and polished bronze interior, theSinterLube® Alloy Bushing has the following distinguishing characteristics:• There is no lubrication hole or oil groove, reflecting the fact that SinterLube Bushings are
designed to operate with only a single initial application of lubricant.• The steel substrate is unhardened. Wear resistant alloy materials are contained in the bronze
mixture; in effect the wear hardness is embedded in the bronze.• A color code identifies the size of the inside diameter. By matching this color with the appropri-
ately color coded pin, a close, standard, or loose running fit can be selected.• The bronze layer is 11-12 times thicker than that of a plated bronze bushing, so there is no risk
of wearing through to the steel substrate. Even under the most severe wear conditions theSinterLube® Alloy Bushing maintains its lubricated bearing surface.
Benefits - 10 Reasons to Switch to SinterLube®
Here are a few of the advantages of SinterLube® Alloy Bushings, which our test-ing has so far uncovered:1. Graphite plug bushings operate at higher temperatures so they require larger running clear-
ances. The minimum running clearance needed for a SinterLube® Bushing is two to threetimes smaller, so close tolerance stamping work can now be performed with lubrication freebushings.
2. SinterLube® Bushings resist wear, so guiding accuracy is maintained throughout the produc-tion run.
3. Standard SinterLube® Bushing clearances make die set disassembly and reassembly mucheasier than with loose fitting graphite plug bushings, which allow the punch holder to cockand jam.
4. An initial application is all that’s required to operate SinterLube® Bushings successfully, but ifadditional lubrication is applied during the production run, no harm is done. By contrast,lubrication of a graphite plug bushing results in a sticky mess, making it hard to disengagethe bushing from the guide pin.
5. Due to the rapid wear rate of graphite plug bushings many stampers replace the bushings ateach die regrind. This is a needless expense which SinterLube® bushings eliminate.
6. We have not yet discovered the maximum speed at which SinterLube® Bushings can run, butpress speeds of 800 strokes per minute at 1” stroke are well within its performance range.Many high speed tools requiring ball bearing guiding can now be fitted with SinterLube®
Bushings and benefit from the greater rigidity as well as the lower cost of solid guiding.7. According to our tests, bronze plated bushings operate well so long as they are lubricated
every shift. SinterLube® Bushings do not require that nagging maintenance chore. Regularlubrication no longer needs to be policed on your stamping line.
8. At high operating temperatures graphite plugs become dislodged as the bonding glue melts.SinterLube® Bushings do not contain any glue and are entirely suitable for hot stamping orhigh temperature mold applications.
9. SinterLube® Alloy Bushings require less machining to produce, so they cost less than graphiteplug bushings.
10. SinterLube® Alloy Bushings are interchangeable with our sintered bronze bushings, so youcan easily test our assertions for yourself and install a set of SinterLube® Bushings duringyour tool’s next scheduled maintenance.
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
COMPONENTS FOR DIES AND MOLDS
Guide Pins - INCHDANLY Standard ...................
Bushings - INCHDANLY Standard ...................
Guide Pins - METRICDANLY Standard ...................
Bushings - METRICDANLY Standard ...................
Guide PinsNAAMS Standard ..................
Bushings NAAMS Standard ..................
Guide PinsDIN Standard 9833 ...............
BushingsDIN Standard 9834 ...............
Guide PinsAFNOR Standard .................
BushingsAFNOR Standard .................
Guide Pins for Molds - INCH ....................
Bushings for Molds - INCH....................
Guide Pinsfor Molds - METRIC.................
Bushingsfor Molds - METRIC ................
A Closer Look ........................
Other Products ......................
IndexREADY
Flange Length Length Catalog B E F Number
Nominal Pin Diameter
O
1” 1.31
2.50
3.00
3.50
1.56
1.87
2.25
5-0816-8355-0818-8355-0820-8355-0822-8355-0824-8355-0826-8355-0828-8355-0830-835
44 1/2
55 1/2
66 1/2
77 1/2
44 1/2
55 1/2
66 1/2
77 1/2
88 1/2
99 1/210
55 1/2
66 1/2
77 1/2
88 1/2
99 1/210115
5 1/26
6 1/27
7 1/28
8 1/29
9 1/2101112
1 1/4”
1 1/2”
1 3/4”
1 3/16”
1 7/16”
1 11/16”
5-1016-8355-1018-8355-1020-8355-1022-8355-1024-8355-1026-8355-1028-8355-1030-8355-1032-8355-1034-8355-1036-8355-1038-8355-1040-835
5-1220-8355-1222-8355-1224-8355-1226-8355-1228-8355-1230-8355-1232-8355-1234-8355-1236-8355-1238-8355-1240-8355-1244-835
5-1420-8355-1422-8355-1424-8355-1426-8355-1428-8355-1430-8355-1432-8355-1434-8355-1436-8355-1438-8355-1440-8355-1444-8355-1448-835
7/8”
Flange Length Length Catalog B E F Number
Nominal Pin Diameter
O
2”
55 1/2
66 1/2
77 1/2
88 1/2
99 1/2101112
55 1/2
66 1/2
77 1/2
88 1/2
99 1/21011121314
67891011121416
2 1/2”
3”
1 15/16”
2 3/16”
1 15/16”
5-1620-8355-1622-8355-1624-8355-1626-8355-1628-8355-1630-8355-1632-8355-1634-8355-1636-8355-1638-8355-1640-8355-1644-8355-1648-835
5-2020-8355-2022-8355-2024-8355-2026-8355-2028-8355-2030-8355-2032-8355-2034-8355-2036-8355-2038-8355-2040-8355-2044-8355-2048-8355-2052-8355-2056-835
5-2424-8355-2428-8355-2432-8355-2436-8355-2440-8355-2444-8355-2448-8355-2456-8355-2464-835
Length Catalog L Number
Nominal Pin Diameter
O
1”
5-0813-8255-0815-8255-0817-8255-0818-8255-0819-8255-0820-8255-0821-8255-0822-8255-0823-8255-0824-8255-0826-8255-0828-8255-0830-8255-0832-8255-0834-8255-0836-825
3 1/43 3/44 1/44 1/24 3/455 1/45 1/25 3/466 1/277 1/288 1/29
1 1/4”
5-1017-8255-1019-8255-1021-8255-1022-8255-1023-8255-1024-8255-1026-8255-1028-8255-1030-8255-1032-8255-1034-8255-1036-8255-1040-8255-1044-8255-1048-825
4 1/44 3/45 1/45 1/25 3/466 1/277 1/288 1/29101112
1 1/2”
4 1/455 3/466 1/277 1/288 1/299 1/210101/211111/212121/21314
5-1217-8255-1220-8255-1223-8255-1224-8255-1226-8255-1228-8255-1230-8255-1232-8255-1234-8255-1236-8255-1238-8255-1240-8255-1242-8255-1244-8255-1246-8255-1248-8255-1250-8255-1252-8255-1256-825
Length Catalog L Number
5-1420-8255-1423-8255-1426-8255-1428-8255-1430-8255-1432-8255-1434-8255-1436-8255-1438-8255-1440-8255-1442-8255-1444-8255-1446-8255-1448-8255-1450-8255-1452-8255-1456-8255-1460-8255-1468-825
55 3/46 1/277 1/288 1/299 1/210101/211111/212121/213141517
2”
5-1623-8255-1626-8255-1629-8255-1630-8255-1631-8255-1632-8255-1634-8255-1636-8255-1638-8255-1640-8255-1642-8255-1644-8255-1646-8255-1648-8255-1650-8255-1652-8255-1656-8255-1660-8255-1664-8255-1668-8255-1672-825
5 3/46 1/27 1/47 1/27 3/488 1/299 1/210101/211111/212121/2131415161718
2 1/2”
3”
88 3/49 1/21011121314171820
8910111213141720
5-2032-8255-2035-8255-2038-8255-2040-8255-2044-8255-2048-8255-2052-8255-2056-8255-2068-8255-2072-8255-2080-825
5-2432-8255-2436-8255-2440-8255-2444-8255-2448-8255-2452-8255-2456-8255-2468-8255-2480-825
1 3/4”
Nominal Pin Diameter
O
4
READYGuide PinsDANLY StandardI
NC
H Components for Dies and Molds
Precision Pin Selection Guide (-825) Demountable Pin Selection Guide (-835)
F
E
O
B
5
Bushings - DANLY Standard
Components for Dies and MoldsIN
CH
READY
• Ideal for retro-fits to improve productivity and decrease costlymaintenance.
• Proven quality and dependability in dies for years.
• Readily available.
• Oversize press fit end for die shoe and nominal size end forbushing.
• Interchangeable with familiar brands.
Short Shoulder Bushings
Standard Shoulder Bushings
Extra Long Shoulder Bushings
15/161 1/81 3/161 3/81 5/81 7/81 7/8
1 3/41 15/16
2 2 3/82 5/82 7/82 7/8
1.721.952.192.502.913.664.19
1.842.092.352.662.953.664.28
13/1613/1613/16
1111
6-08-3356-10-3356-12-3356-14-3356-16-3356-20-3356-24-335
SinterLube®
CatalogNumber
1”1 1/4”1 1/2”1 3/4”2”2 1/2”3”
1 1/21 3/4
2 2 1/42 1/23 1/43 3/4
1.0001.2501.5001.7502.0002.5003.000
InsideDiameter
A
Nom. Dec.
SinterLube®
CatalogNumber
1”1 1/4”1 1/2”1 3/4”2”2 1/2”3”
1 1/21 3/4
22 1/42 1/23 1/43 3/4
15/161 1/81 3/161 3/81 5/81 7/81 7/8
2 11/163 1/83 3/163 3/83 5/84 3/84 3/8
1.0001.2501.5001.7502.0002.5003.000
1 3/42222
2 1/22 1/2
6-08-3456-10-3456-12-3456-14-3456-16-3456-20-3456-24-345
InsideDiameter
A
Nom. Dec.
1.721.952.192.502.913.664.19
1.842.092.352.662.953.664.28
15/161 1/81 3/161 3/81 5/81 7/81 7/8
3 15/164 1/84 3/164 3/84 5/84 7/84 7/8
3333333
6-08-3856-10-3856-12-3856-14-3856-16-3856-20-3856-24-385
1 1/21 3/4
22 1/42 1/23 1/43 3/4
SinterLube®
CatalogNumber
1”1 1/4”1 1/2”1 3/4”2”2 1/2”3”
1.0001.2501.5001.7502.0002.5003.000
InsideDiameter
A
Nom. Dec.
1.721.952.192.502.913.664.19
1.842.092.352.662.953.664.28
For clamp data, guide pin tap sizes and seating torques,please refer to the Ready Die Set and Guiding Catalog.
SinterLube® Bushings for Dies - INCH (-335, -345, -385)
F
AC
C1
B
E
L
38
Length Catalog L Number
NominalPin Diameter
O
5-1910-825-1911-825-1912-825-1913-825-1914-825-1915-825-1916-825-1917-825-1918-825-1919-825-1920-825-2410-825-2411-825-2412-825-2413-825-2414-825-2415-825-2416-825-2417-825-2418-825-2419-825-2420-825-2422-825-2424-825-2426-825-2428-82
5-1810-825-1811-825-1812-825-1813-825-1814-825-1815-825-1816-825-1817-825-1818-825-1819-825-1820-82
100110120130140150160170180190200
100110120130140150160170180190200220240260280130140150160170180190200220240260280320
100110120130140150160170180190200
25
24
18
19
Length Catalog L Number
Nominal Pin Diameter
O5-4013-825-4014-825-4015-825-4016-825-4017-825-4018-825-4019-825-4020-825-4022-825-4024-825-4026-825-4028-825-4032-825-4036-82
130140150160170180190200220240260280320360
40
42
50
52
63
80
32
30
5-2510-825-2511-825-2512-825-2513-825-2514-825-2515-825-2516-825-2517-825-2518-825-2519-825-2520-825-2522-825-2524-825-2526-825-2528-825-3013-825-3014-825-3015-825-3016-825-3017-825-3018-825-3019-825-3020-825-3022-825-3024-825-3026-825-3028-825-3020-82
100110120130140150160170180190200220240260280
130140150160170180190200220240260280320
5-3213-825-3214-825-3215-825-3216-825-3217-825-3218-825-3219-825-3220-825-3222-825-3224-825-3226-825-3228-825-3232-82
130140150160170180190200220240260280320360160180200220240260280320330360400450160180200220240260280320330360400450
200220240260280320360400450500
240260280320360400450500
5-4213-825-4214-825-4215-825-4216-825-4217-825-4218-825-4219-825-4220-825-4222-825-4224-825-4226-825-4228-825-4232-825-4236-825-5016-825-5018-825-5020-825-5022-825-5024-825-5026-825-5028-825-5032-825-5033-825-5036-825-5040-825-5045-825-5216-825-5218-825-5220-825-5222-825-5224-825-5226-825-5228-825-5232-825-5233-825-5236-825-5240-825-5245-82
5-6320-825-6322-825-6324-825-6326-825-6328-825-6332-825-6336-825-6340-825-6345-825-6350-825-8024-825-8026-825-8028-825-8032-825-8036-825-8040-825-8045-825-8050-82
READY
6
Guide Pins -DANLY Standard
METR
IC Components for Dies and Molds
Precision Pin Selection Guide
Length Catalog F Number
E
5-1807-835-1808-835-1809-835-1810-835-1811-835-1812-835-1813-835-1814-835-1815-835-1816-835-1907-835-1908-835-1909-835-1910-835-1911-835-1912-835-1913-835-1914-835-1915-835-1916-835-2407-835-2408-835-2409-835-2410-835-2411-835-2412-835-2413-835-2414-835-2415-835-2416-835-2417-835-2418-835-2420-83
708090100110120130140150160708090100110120130140150160708090100110120130140150160170180200
20
20
24
25.6
25.6
32.6
18
19
24
D3D1
3040.632
3040.630
2432.625
7080901001101201301401501601701802009010011012013014015016017018020022024028090100110120130140150160170180200220240280
5-2507-835-2508-835-2509-835-2510-835-2511-835-2512-835-2513-835-2514-835-2515-835-2516-835-2517-835-2518-835-2520-835-3009-835-3010-835-3011-835-3012-835-3013-835-3014-835-3015-835-3016-835-3017-835-3018-835-3020-835-3022-835-3024-835-3028-835-3209-835-3210-835-3211-835-3212-835-3213-835-3214-835-3215-835-3216-835-3217-835-3218-835-3220-835-3222-835-3224-835-3228-83
Demountable Pin
Selection Guide
7
Bushings -DANLY Standard
Components for Dies and MoldsM
ETR
IC
READY
SinterLube® Bushings
for Dies - METRIC
Short Shoulder Bushings
Standard Shoulder Bushings
Extra Long Shoulder Bushings
Low Profile Bushings
D3
45
45
63.8
63.8
50
52
497663
609380
Length Catalog F NumberE
5-4010-835-4011-835-4012-835-4013-835-4014-835-4015-835-4016-835-4017-835-4018-835-4020-835-4022-835-4024-835-4028-83
5-4210-835-4211-835-4212-835-4213-835-4214-835-4215-835-4216-835-4217-835-4218-835-4220-835-4222-835-4224-835-4228-83
D1
3750.840
3750.842
100110120130140150160170180200220240280100110120130140150160170180200220240280110120130140150160170180200220240260280320360400
110120130140150160170180200220240260280320360400
5-5011-835-5012-835-5013-835-5014-835-5015-835-5016-835-5017-835-5018-835-5020-835-5022-835-5024-835-5026-835-5028-835-5032-835-5036-835-5040-83
5-5211-835-5212-835-5213-835-5214-835-5215-835-5216-835-5217-835-5218-835-5220-835-5222-835-5224-835-5226-835-5228-835-5232-835-5236-835-5240-83
120140160180200220240280320360400
5-6312-835-6314-835-6316-835-6318-835-6320-835-6322-835-6324-835-6328-835-6332-835-6336-835-6340-83
180200220240280320360400
5-8018-835-8020-835-8022-835-8024-835-8028-835-8032-835-8036-835-8040-83
Demountable Pin
Selection Guide Continued
8
READY
Guide Pins, NAAMS Standard
L
A
8
Dg6
Dr6
B
R
R
15°
D L A B R CatalogNumber
NAAMSCode
140160180200
160180200225250
160180200225250280315
200225250280315355400500
250280315355400500
315355400500
5-NP32-1405-NP32-1605-NP32-1805-NP32-200
5-NP40-1605-NP40-1805-NP40-2005-NP40-2255-NP40-250
5-NP50-1605-NP50-1805-NP50-2005-NP50-2255-NP50-2505-NP50-2805-NP50-315
5-NP63-2005-NP63-2255-NP63-2505-NP63-2805-NP63-3155-NP63-3555-NP63-4005-NP63-500
5-NP80-2505-NP80-2805-NP80-3155-NP80-3555-NP80-4005-NP80-500
5-NP100-3155-NP100-3555-NP100-4005-NP100-500
G513214G513216G513218G513220
G514016G514018G514020G514022G514025
G515016G515018G515020G515022G515025G515028G515031
G516320G516322G516325G516328G516331G516335G516340G516350
G518025G518028G518031G518035G518040G518050
G511031G511035G511040G511050
32
40
50
63
80
100
45
56
70
80
100
125
8
8
10
10
10
10
2
2
2.5
2.5
3
3
Guide Pins -NAAMS Standard
Components for Dies and Molds
Material: AISI or SAE 1080/1020, case hardened to Rc 57-62, minimum depth of 0.8 mm.
9
READY
SinterLube® Bushings, NAAMS Standard
6-NM32-506-NM40-636-NM50-716-NM63-806-NM80-1006-NM100-125
CatalogNumber
3240506380100
D1
mmD2
mmD3
mmD4
mmL1
mmL2
mmR
mm
40506380100125
50637190112140
40506380100125
50637180100125
4050566380106
3356810
G613250G614063G615071G616380G618010G611012
NAAMSCode
NAAMS SinterLube bushings are supplied with(3) (NAAMS #G720000) toe clamps, unlessotherwise specified.
Clamp #6-99-1 NAAMS #G720000
SinterLube® Pad Bushings, NAAMS Standard
Material: Self-lubricating SinterLube® alloybushings supplied with (3) toe clamps.
6-NM32P-506-NM40P-556-NM50P-636-NM63P-756-NM80P-90
6-NM100P-115
CatalogNumber
3240506380100
D1
mmD2
mmD3
mmL1
mmL2
mm
40506380100125
50637190112140
5055637590115
45681012
G713250G714055G715063G716375G718090G711011
NAAMSCode
Bushings -NAAMS Standard
Components for Dies and Molds
D3
D1H6
D4 L2
L1
D2 g6
R
6
D3
D1C9
L1
D2 g6
L2 x 5°6
10
READY
Guide Pins, DIN Standard 9833
Guide Pins - DIN Standard 9833
Components for Dies and Molds
D1
D2
L1
L2
D1g6
D2r6
L2CatalogNumber
125140160140160180200160180200224250280160180200224250280315355200224250280315355250280315355400
355400
405-2512-8505-2514-8505-2516-8505-3214-8505-3216-8505-3218-8505-3220-8505-4016-8505-4018-8505-4020-8505-4022-8505-4025-8505-4028-8505-5016-8505-5018-8505-5020-8505-5022-8505-5025-8505-5028-8505-5031-8505-5035-8505-6320-8505-6322-8505-6325-8505-6328-8505-6331-8505-6335-8505-8025-8505-8028-8505-8031-8505-8035-8505-8040-8505-1035-8505-1040-850
25
32 32 45
564040
50
63
80
100 100 125
80 100
63 80
50 70
25
L1
11
READY
SinterLube® Bushings, DIN Standard 9834
Bushings -DIN Standard 9834
Components for Dies and Molds
6-2532-786-3240-786-4050-786-5063-786-6380-786-8010-786-1012-78
Clamp CatalogNumber
6-78-16-78-16-78-16-78-16-78-26-78-26-78-2
D1
mmH7
D2
mmh6
D3
mm-0.25
D4
mm-0.8
L1
mm-1
-1.6
L2
mm-2
-2.5
L3
mm+0.1
L4
mm+ 1
R1
mmR2
mm
3240506380100125
3240506380100125
4050637190112140
4050637180100125
324050566380106
6.36.36.36.3101010
345
6.3810
12.5
33356810
1111111
253240506380100
t2-0.3
t1+0.2
t3+0.3
b1 b2 d2+0.2
d3+0.2
h l-0.3
6-78-16-78-2
6.310
2032
7.511
711.5
1117.5
1016
2032
711.5
510
M6 x 16M10 x 20
CatalogNumber
Screw(included)
D1 D4+0.3
253240506380100
58667989123143168
1111222
No. of Clampsper Bushing
Mounting Dimensions
READY
A Ø L B C eCatalogNumber
160
200
220
180
200
220
280
220
280
400
280
5-3216-844
5-3220-844
5-3222-844
5-4018-844
5-4020-844
5-4022-844
5-4028-844
5-5022-844
5-5028-844
5-5040-844
5-6328-844
32
40
50
63
10
12
16
16 18 13
12 8
12 8
12 8
A Ø L B C D CatalogNumber
140
160
200
180
200
220
220
250
280
250
280
315
315
355
32
40
50
63
80
10
12
16
16
16
100
125
32 12
12
12
18
18
63
80
5-3214-840
5-3216-840
5-3220-840
5-4018-840
5-4020-840
5-4022-840
5-5022-840
5-5025-840
5-5028-840
5-6325-840
5-6328-840
5-6332-840
5-8032-840
5-8036-840
Guide Pins, AFNOR Standard
ØA d80.5x45°
Ø > 40ØA h5
Ø < 40ØA h4
L
B
Ce
15°
ØA d8
0.5x45°
ØA h5
L
CD
15°
B
Ø A D E F Ø G CatalogNumber
32
40
50
63
80
10
12
14
18
20
6.6
6.6
9
11
14
56
70
80
100
110
36
50
55
70
80
6-0032-840
6-0040-840
6-0050-840
6-0063-840
6-0080-840
Ø D d CatalogNumber
32
40
50
63
80
28
36
46
57
74
4
4
4
6
6
6-0032-844
6-0040-844
6-0050-844
6-0063-844
6-0080-844
Ddh10
EF
FD
ØG
E= =
=
=
==
=
=
A
X
X
12
Guide Pins - AFNOR Standard
Components for Dies and Molds
Bottom retained guide pins, AFNOR E60 050 Center retained guide pins, AFNOR E63 061
Clamps for Center Retained Guide Pins
Rings for Retained Guide Pins
13
READY
SinterLube® Bushings, AFNOR Standard
Bushings - AFNOR Standard
Components for Dies and Molds
Ø Ø M Ø N Ø d4 h Ø d7 e3 e2 e1
32
40
50
63
80
40
50
63
80
100
12
12
16
20
25
6.6
6.6
9
11
14
41
49
57.5
72
25
38.5
46
55
70
21
14
17
17
20
51
61
72
91
113
80
100
125
140
180
6-0032-790
6-0040-790
6-0050-790
6-0063-790
6-0080-790
CatalogNumber
Ø A L Ø B Ø C F CatalogNumber
32
40
50
63
80
50
63
80
100
125
6
8
10
12
16
44
52
63
80
100
50
60
71
90
112
6-3244-79
6-4052-79
6-5063-79
6-6380-79
6-8010-79
Bushing Hardware
F
h
ØC
d4
m6
-0.5
ØBd8
ØB H6
L -0.2
ØA G7 DIN 912
d7
ØN
ØM
e1 +0.1
e3 +0.1
e2 +0.110
14
IN
CH READY
Mold Guide Pins, INCH
Guide Pins - for Molds
Components for Dies and Molds
NominalPin Ø
L1overalllength
CatalogNumber
1 3/42 1/42 3/43 1/43 3/44 1/44 3/45 1/45 3/46 1/46 3/47 1/47 3/4
1 3/42 1/42 3/43 1/43 3/44 1/44 3/45 1/45 3/46 1/46 3/47 1/47 3/48 1/48 3/49 1/41 3/42 1/42 3/43 1/43 3/44 1/44 3/45 1/45 3/46 1/46 3/47 1/47 3/48 1/48 3/49 1/49 3/410 1/410 3/411 1/411 3/412 1/4
6-16-MP6-22-MP6-26-MP6-32-MP6-36-MP6-42-MP6-46-MP6-52-MP6-56-MP6-62-MP6-66-MP6-72-MP6-76-MP
7-16-MP7-22-MP7-26-MP7-32-MP7-36-MP7-42-MP7-46-MP7-52-MP7-56-MP7-62-MP7-66-MP7-72-MP7-76-MP7-82-MP7-86-MP7-92-MP8-16-MP8-22-MP8-26-MP8-32-MP8-36-MP8-42-MP8-46-MP8-52-MP8-56-MP8-62-MP8-66-MP8-72-MP8-76-MP8-82-MP8-86-MP8-92-MP8-96-MP8-102-MP8-106-MP8-112-MP8-116-MP8-122-MP
3/4”
7/8”
1”
7/87/87/87/87/8
1 3/81 3/81 3/81 7/81 7/81 7/81 7/81 7/8
7/87/87/87/87/8
1 3/81 3/81 3/81 3/81 7/81 7/81 7/81 7/81 7/81 7/81 7/87/87/87/87/87/8
1 3/81 3/81 3/81 3/81 3/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/8
L3 NominalPin Ø
L1overalllength
CatalogNumber
5 3/46 3/47 3/48 3/49 3/410 3/411 3/412 3/413 3/414 3/415 3/416 3/418 3/4
8 3/410 3/412 3/414 3/416 3/418 3/4
20-56-MP20-66-MP20-76-MP20-86-MP20-96-MP20-106-MP20-116-MP20-126-MP20-136-MP20-146-MP20-156-MP20-166-MP20-186-MP
24-86-MP24-106-MP24-126-MP24-146-MP24-166-MP22-186-MP
2 1/2”
3”
2 3/82 3/82 3/82 3/82 3/82 3/82 3/82 3/82 3/82 3/82 3/82 3/82 3/8
2 7/82 7/82 7/82 7/82 7/82 7/8
L3NominalPin Ø
L1overalllength
CatalogNumber
2 3/43 1/43 3/44 1/44 3/45 1/45 3/46 1/46 3/47 1/47 3/48 1/48 3/49 1/49 3/410 1/410 3/411 1/411 3/412 1/412 3/413 3/414 3/415 3/4
3 3/44 1/44 3/45 1/45 3/46 1/46 3/47 3/48 3/49 3/410 3/411 3/412 3/413 3/414 3/415 3/45 3/46 3/47 3/48 3/49 3/410 3/411 3/412 3/413 3/414 3/415 3/416 3/418 3/4
16-56-MP16-66-MP16-76-MP16-86-MP16-96-MP16-106-MP16-116-MP16-126-MP16-136-MP16-146-MP16-156-MP16-166-MP16-186-MP
10-26-MP10-32-MP10-36-MP10-42-MP10-46-MP10-52-MP10-56-MP10-62-MP10-66-MP10-72-MP10-76-MP10-82-MP10-86-MP10-92-MP10-96-MP10-102-MP10-106-MP10-112-MP10-116-MP10-122-MP10-126-MP10-136-MP10-146-MP10-156-MP
1 1/4”
1 1/2”
2”
7/87/87/87/8
1 3/81 3/81 3/81 3/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/8
1 3/81 3/81 3/81 3/81 3/81 3/81 3/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/81 7/8
L3
12-36-MP12-42-MP12-46-MP12-52-MP12-56-MP12-62-MP12-66-MP12-76-MP12-86-MP12-96-MP12-106-MP12-116-MP12-126-MP12-136-MP12-146-MP12-156-MP
D2
D3
L2
L3
L1
D1
3/4” - 1 1/2” dia. have taper length of 1/4”.2” - 2 1/2” have taper length of 3/8”.3” pins have XX radius.
Nom.I.D.
3/4
7/8
1
1 1/4
1 1/2
2
2 1/2
3
D1+.0005-.0000
0.749
0.874
0.999
1.249
1.499
1.999
2.499
2.999
D2+.0005-.0000
0.7510
0.8760
1.0010
1.2510
1.5010
2.0010
2.5010
3.0010
D3+.000-0.005
0.990
1.115
1.240
1.490
1.740
2.240
2.740
3.365
L2+.000-.005
0.1870
0.2500
0.2500
0.3120
0.3120
0.3120
0.3120
0.5000
General Dimensions
15
READY
SinterLube® Mold Bushings, INCH
NominalPin Ø
CatalogNumber
7/81 3/81 7/82 3/82 7/83 3/83 7/87/8
1 3/81 7/82 3/82 7/83 3/83 7/84 3/8
7/81 3/81 7/82 3/82 7/83 3/83 7/84 3/87/8
1 3/81 7/82 3/82 7/83 3/83 7/84 3/8
6-0607-8456-0613-8456-0617-8456-0623-8456-0627-8456-0633-8456-0637-845
3/4”
7/8”
1”
6-0707-8456-0713-8456-0717-8456-0723-8456-0727-8456-0733-8456-0737-8456-0743-845
6-0807-8456-0813-8456-0817-8456-0823-8456-0827-8456-0833-8456-0837-8456-0843-8456-1007-8456-1013-8456-1017-8456-1023-8456-1027-8456-1033-8456-1037-8456-1043-845
1 1/4”
L1Length
+.000/-.030
NominalPin Ø
CatalogNumber
7/81 3/81 7/82 3/82 7/83 3/83 7/84 3/84 7/81 3/81 7/82 3/82 7/83 3/83 7/84 3/84 7/85 7/81 3/81 7/82 3/82 7/83 3/83 7/84 3/84 7/85 7/83 7/84 7/85 7/8
1 1/2”
2”
2 1/2”
6-1613-8456-1617-8456-1623-8456-1627-8456-1633-8456-1637-8456-1643-8456-1647-8456-1657-8456-2013-8456-2017-8456-2023-8456-2027-8456-2033-8456-2037-8456-2043-8456-2047-8456-2057-8456-2437-8456-2447-8456-2457-845
3”
L1Length
+.000/-.030
6-1207-8456-1213-8456-1217-8456-1223-8456-1227-8456-1233-8456-1237-8456-1243-8456-1247-845
D1
D2
undercut
L2
L1
D3
Bushings -for Molds
Components for Dies and Molds
IN
CH
Nom.I.D.
3/4
7/8
1
1 1/4
1 1/2
2
2 1/2
3
D1+.0005-.0000
0.7505
0.8755
1.0005
1.2505
1.5005
2.0005
2.5005
3.0005
D2+.0005-.0000
1.1255
1.2505
1.3755
1.6255
2.0005
2.5005
3.2505
3.7505
D3+.000-0.005
1.3020
1.4270
1.5520
1.8020
2.1770
2.6770
3.4270
3.9900
L2+.000-.005
0.1870
0.1870
0.1870
0.1870
0.1870
0.1870
0.1870
0.5000
General Dimensions
Inside Diameter
Guide Pins and Bushings -for Molds
Components for Dies and Molds
METR
IC
16
READY
Mold Guide Pins and SinterLube® Mold Bushings, METRIC
S L
35456585115
354565851051251653555759511513516545658510513516535557595155
35557595145557595135
5595
22
27
36
46
56
66
76
96
017-1827035017-1827045017-1827065017-1827085017-1827105017-1827125017-1827165017-1836035017-1836055017-1836075017-1836095017-1836115017-1836135017-1836165017-1846045017-1846065017-1846085017-1846105017-1846135017-1846165017-1856045017-1856055017-1856075017-1856095017-1856155
017-1866045017-1866055017-1866075017-1866095017-1866145017-1876055017-1876075017-1876095017-1876135
017-1896055017-1896095
017-2056045017-2056055017-2056075017-2056095017-2056155
017-2066045017-2066055017-2066075017-2066095017-2066145
017-2046045017-2046065017-2046085017-2046105017-2046135017-2046165
017-2036035017-2036055017-2036075017-2036095017-2036115017-2036135017-2036165
017-2027035017-2027045017-2027065017-2027085017-2027105017-2027125017-2027165
017-2022035017-2022045017-2022065017-2022085017-2022115
d1 = 18Catalog Number
d1 = 20Catalog Number
017-2076055017-2076075017-2076095017-2076135
017-2096055017-2096095
017-1822035017-1822045017-1822065017-1822085017-1822115
S L
35456585105125165
35557595115135165
456585105125165205557595115165205
35557595155
5575951151455575957511515595135
155
27
36
46
56
66
76
96
116
136
156
017-2236035017-2236055017-2236075017-2236095017-2236115017-2236135017-2236165
017-2246045017-2246065017-2246085017-2246105017-2246125017-2246165017-2246205017-2256055017-2256075017-2256095017-2256115017-2256165017-2256205
017-2266035017-2266055017-2266075017-2266095017-2266155
017-2276055017-2276075017-2276095017-2276115017-2276145017-2296055017-2296075017-2296095017-22116075017-22116115017-22116155017-22136095017-22136135
017-22156155
017-2466035017-2466055017-2466075017-2466095017-2466155
017-2456055017-2456075017-2456095017-2456115017-2456165017-2456205
017-2436035017-2436055017-2436075017-2436095017-2436115017-2436135017-2436165
017-2427035017-2427045017-2427065017-2427085017-2427105017-2427125017-2427165
d1 = 22Catalog Number
d1 = 24Catalog Number
017-2476055017-2476075017-2476095017-2476115017-2476145017-2496055017-2496075017-2496095
017-2227035017-2227045017-2227065017-2227085017-2227105017-2227125017-2227165
017-2446045017-2446065017-2446085017-2446105017-2446125017-2446165017-2446205
017-24116075017-24116115017-24116155017-24136095017-24136135
017-24156155
9
26e726k6
L
d1g626e7310
0
-0.5
-0.26
S-0.4-1
9
30e730k6
L
d1g630e7350
0
-0.5
-0.26
S-0.4-1
Guide Pins and Bushings -for Molds
Components for Dies and Molds
METR
IC
17
READY
Mold Guide Pins and SinterLube® Mold Bushings, METRIC
S L
4565105165
55759511515524545658510516524555759511513517524575951151752459511515522595115155115155
95115155115155
27
36
46
56
66
76
96
116
136
156
017-3066075017-3066095017-3066115017-3066175017-3066245017-3076095017-3076115017-3076155017-3076225
017-3096095017-3096115017-3096155017-30116115017-30116155017-30136095017-30136115017-30136155
017-30156115017-30156155
017-3227045017-3227065017-3227105017-3227165
d1 = 30Catalog Number
d1 = 32Catalog Number
017-3027045017-3027065017-3027105017-3027165
017-3036055017-3036075017-3036095017-3036115017-3036155017-3036245
017-3236055017-3236075017-3236095017-3236115017-3236155017-3236245
017-3046045017-3046065017-3046085017-3046105017-3046165017-3046245
017-3246045017-3246065017-3246085017-3246105017-3246165017-3246245
017-3056055017-3056075017-3056095017-3056115017-3056135017-3056175017-3056245
017-3256055017-3256075017-3256095017-3256115017-3256135017-3256175017-3256245017-3266075017-3266095017-3266115017-3266175017-3266245017-3276095017-3276115017-3276155017-3276225017-3296095017-3296115017-3296155
017-32116115017-32116155017-32136095017-32136115017-32136155
017-32156115017-32156155
S
2227364656667696
d1 = 18
009-18022009-18027009-18036009-18046009-18056009-18066009-18076009-18096
d1 = 20
009-20022009-20027009-20036009-20046009-20056009-20066009-20076009-20096
S
2227364656667696116
d1 = 22
009-22022009-22027009-22036009-22046009-22056009-22066009-22076009-22096009-22116
d1 = 24
009-24022009-24027009-24036009-24046009-24056009-24066009-24076009-24096009-24116
S
27364656667696116
d1 = 30
009-30027009-30036009-30046009-30056009-30066009-30076009-30096009-30116
d1 = 32
009-32027009-32036009-32046009-32056009-32066009-32076009-32096009-32116
9
42e742k6
L
d1g642e7470
0
-0.5
-0.26
S-0.4-1
9
26m5d1G6 26e726e731
-0.1
+0
-0.25
-0.16
S-0.2-0.5
9
30m5d1G6 30e730e735
-0.1
+0
-0.25
-0.16
S-0.2-0.5
9
42m5d1G6 42e742e747
-0.1
+0
-0.25
-0.16
S-0.2-0.5
For best results, we recommend that you apply an initial coat of lubricantto the inside diameter of each SinterLube bushing before starting produc-tion. Ideally, the lubricant should be a high viscosity oil of the type avail-able from Ready and its distributors:
1 quart catalog no. 6-64-521 galloncatalog no. 6-128-52
Held in place by the many pores that make up the SinterLube bushing’ssintered surface, the oil helps ease the operating severity as the guidepins and bushings seat themselves. Once initial wear-in is complete,the anti-friction particles embedded in the bronze matrix take over, andmaintain proper operating conditions.
Method of UseA Closer Look
18
READY
SinterLube® Method of Use
This view reveals the greater bronze thick-ness and the porosity of our SinterLube®
Bushing.
Actual magnified views of bushing cross sections.
Take A Closer Look ...
Compare The Thickness ...
This view reveals the fusion bonding of thethick SinterLube® layer to the steel substrate.
steel substrate
SinterLube® Thickness- up to 12 times thickerthan plated bronze
plated bronze thickness
sintered bronze
sintered bronze
Note porosity: this trapsand retains oil for longerlife. steel substrate
100x magnification 1000x magnification
fusedbond
READY
SELECTIVE FIT®
Guiding ElementsREADY
Die Sets & Machining
HYDROCAM®
Hydraulic CamsCAMDRIVE®
Mechanical Cams
DESIGN2-TITE®
Gas Springs &Manifolds
READY BENDERS®
Forming Tools
SUPERSPRING®
Die Springs
other READYproducts
The innovator of our industry®
19
READYCad 3DCad Design Software
NEW!
The Innovator of Our Industry®
Our factories and offices:
U.S.A. • U.K. • France • Belgium • Germany • Sweden • Netherlands • Singapore
READY
★
READY TECHNOLOGY, INC.333 Progress Rd. • Dayton, OH 45449
(800) 543-4355 • (937) 866-7200 • fax (937) 866-7226
630 Kiser St. • Dayton, OH 45404
(800) 367-3437 • (937) 228-8181 • FAX: (937) 228-2928
BOLDEN DIE SUPPLY189 Cobb Pkwy N C-5 • Marietta, GA 30065
(800) 277-4278 • (770) 427-4278 • fax (770) 427-3282
www.readytechnology.com
© 2004 READY Technology, Inc.
CATALOG # 704