sistema de seguridad wi-fisensores de movimiento control remoto deslice la tapa, e inserte una...
TRANSCRIPT
-
Sistema de seguridad Wi-Fi
Manual de instrucciones
V0.0/0818v
-
2
ÍNDICE
CONTENIDO.....................................................................................................................3
DESCRIPCIÓN GENERAL..............................................................................................4
COLOCACIÓN DE BATERÍAS........................................................................................5
PREPARATIVOS..............................................................................................................6
OPCIONES DE CONFIGURACIÓN.................................................................................7 Configuración inalámbrica (Wi-Fi).............................................................................7 Configuración alámbrica (con cable de red)..........................................................12
MONITOREO..................................................................................................................14
VINCULAR LOS SENSORES Y EL CONTROL REMOTO............................................16
ACTIVAR ALERTAS.......................................................................................................18
INSTALACIÓN................................................................................................................20 Cámara........................................................................................................................20 Sensores magnéticos................................................................................................21 Sensores de movimiento..........................................................................................23
-
3
CONTENIDO
Cámaras
Sensores magnéticos
Controles
Sensores PIR
-
4
DESCRIPCIÓN GENERAL
Antenas
Micrófono
Infrarrojos (visión nocturna)Lente
Alarma activada
Grabación en tarjeta micro SD
Alarma por detección demovimiento activada
Conexión de red
Botón de reinicio
Entrada RJ45 Ranura para tarjetamicro SD
Entrada de alimentación
-
5
COLOCACIÓN DE BATERÍAS
Sensores magnéticos
Sensores de movimiento
Control remoto
Deslice la tapa, e inserte una batería “AA” en el compartimento. Vuelva a colocar lacubierta.
Remueva el tornillo inferior del sensorpara retirar la cubierta.
Retire el tornillo, e inserte una batería tipo27A en el compartimento. Vuelva a colocar la cubierta.
Saque el conector tipo broche. Conecteuna batería de 9 V y acomódela dentrodel compartimento. Vuelva a colocar lacubierta.
-
6
preparativos
» Inserte una tarjeta de memoria microSD para almacenar videos y fotos.
IEye-cameraZJinChang3.2
» Ingrese a la tienda de aplicaciones de su smartphone para descargar e instalar la app IEye o iEye-camera.
» Abra la aplicación. Seleccione la opción Registro rápido para crear una cuenta de usuario.
Esta aplicación no es propiedad de Steren; la empresa no se hace responsable por su funcionamiento ni actualizaciones.
-
7
OPCIONES DE CONFIGURACIÓN
Antes de configurar las cámaras, verifique cuál es la banda de su red Wi-Fi, si es 2.4G puede elegir cualquiera de las opciones de configuración descritas en este instructivo. Sin embargo, si la frecuencia es 5G, diríjase directamente a la sección “Configuración alámbrica”.
Utilice el convertidor de voltaje para conectar una de las cámaras a un contacto eléctrico. Transcurridos algunos segundos, la cámara entrará en modo de espera de conexión, y emitirá tonos (beeps) continuamente.
Configuración inalámbrica (Wi-Fi)
-
8
1. En su dispositivo móvil, ingrese a la aplicación i-Eye*. Presione +
2. Seleccione Añadir nuevo dispositivo. 3. Seleccione SmartLink.
Las imágenes presentadas corresponden a un dispositivo con sistema operativo Android 7.0 y aplicación iEye-camera (03.24.00.24). Los iconos, la configuración de la interfaz y las funciones pueden variar según la versión de la aplicación y el sistema operativo utilizados.
-
9
4. Introduzca la contraseña de la red Wi-Fi en la que está conectado su dispo-sitivo móvil. Presione Siguiente.
En caso de que no pueda escuchar los tonos, presione el botón “RESET” (ubicado en la parte inferior de la base de la cámara). Luego, espere segundos para que la cámara encienda y entre en modo de espera de conexión.
5. Mientras la cámara sigue en modo de espera de conexión, es decir, si está emi-tiendo tonos continuamente, seleccione esta opción en la aplicación.
-
10
7. Introduzca un nombre para la cámara y la contraseña 123456; presione Guardar.
Nota: Si durante la espera de conexión, la cámara deja de emitir los tonos por un momento y luego los reanuda, o si la conexión es fallida, verifique haber introducido correctamente la contraseña de la red Wi-Fi y que la frecuencia sea de banda 2.4 G.
6. Acerque el dispositivo a la cámara y presione Siguiente.
-
11
8. Presione la pantalla para comenzar a visualizar en tiempo real. Diríjase a la sección “Monitoreo” de este manual para conocer las funciones principales de la aplicación.
Repita el mismo procedimiento para agregar la segunda cámara.
-
12
» Utilice el convertidor de voltaje para conectar una de las cámaras a un contacto eléctrico. Luego, conéctela a un módem por medio de un cable de red.
1. Ingrese a la aplicación iEye-camera. Después de unos segundos aparecerá el mensaje: Buscar nuevo dispositivo; presione › para continuar.
En caso de que no pueda visualizar el nuevo dispositivo, asegúrese de haber conecta-do correctamente el cable de red y reinicie la aplicación.
Configuración alámbrica (con cable de red)
-
13
2. Cuando aparezca el número de identificación de la cámara encontrada, presione +
4. Una vez establecida la conexión, aparecerá la siguiente leyenda:
Repita el mismo procedimiento para agregar la segunda cámara.
5. Presione la pantalla para comenzar a visualizar en tiempo real. Diríjase a la sección “Monitoreo” de este manual para conocer las funciones principales de la aplicación.
3. Introduzca un nombre para la cámara y la contraseña 123456; presione Guardar.
-
14
Una vez sincronizadas ambas cámaras, podrá verlas en la lista de dispositivos como se muestra en la siguiente imagen. La leyenda En línea indica que la cámara está lista para utilizarse
Si activa / desactiva la alerta con el control remoto, tendrá un tiempo de espera de 50 segundos; después de este tiempo la alerta quedará activada.
MONITOREO
Activar/ desactivarReproducir grabaciones
Defensa activa Menú de configura-ción de cámara
Editar nombre de cámara o borrarla
Monitorear(Toque sobre la imagen para
comenzar)
-
15
A continuación, podrá monitorear en tiempo real y controlar los movimientos de la cámara.
Siempre ajuste el ángulo de visión de la cámara mediante la aplicación. Si gira manualmente la cámara, podría dañar el sistema interno.
Grabar en la me-moria del teléfono (Es independiente a la grabación en la tarjeta microSD)
Activar micrófono del teléfono (Mantenga presionado mientras habla para que el mensaje se escuche en el altavoz de la
cámara)
Recortar (Toque para tomar una captura de la imagen transmitida)
Desactivar audio
Pantalla completaResolución
Programación de posi-ciones (5 posiciones)
ConfiguracionesRegresar
-
16
1. Ingrese al menú de configuración de la cámara a la que desea agregar sensores.
2. Presione + para seleccionar el tipo de dispositivo (sensor o control remoto).
Sensores magnéticos y de movimiento
Control remoto
VINCULAR LOS SENSORES Y EL CONTROL REMOTO
-
17
3. Cuando aparezca el siguiente mensaje, encienda el dispositivo seleccionado. Presio-ne Confirmar en la aplicación, y dispare el dispositivo en repetidas ocasiones hasta que aparezca el mensaje: Adición correcta
El sensor agregado se mostrará bajo el tipo de dispositivo agregado
4. Siga el mismo procedimiento para agregar cada sensor.
Puede agregar los mismos sensores a las dos cámaras, sólo considere que la dis-tancia máxima entre el sensor y la cámara no debe superar los 60 metros en línea de vista (libres de obstáculos)
-
18
1. Ingrese al menú de configuración de la cámara en la que activará las alertas y seleccione Ajuste de alarma.
2. Active o desactive las opciones de su preferencia.
ACTIVAR ALERTAS
Activar notificación en el dispositivo
Cuentas a las que la cámara envía la notificación
Ajuste de tiempo de alarma sonora
Activar/ desactivar el sensor
Ajuste de sensibilidad del sensor de la cámara
No disponible para México
-
19
Si ha activado las notificaciones en el dispositivo móvil, recibirá alertas de acuerdo con la configuración seleccionada
-
20
INSTALACIÓN
Cámara
1
3 4
5
2
-
21
Sensores magnéticos
Opción 1 (con las placas adhesivas)
Adhiera el sensor y el elemento magnético sobre las placas.
Recuerde: ¡La distancia entre ambas partes del sensor no debe exceder los 15 mm!
Retire la cubierta protectora de la placa y pegue el detector (A) en el marco de la puerta; repita el proceso para el elemento magnético (B) y colóquelo en la puerta. Asegúrese de que las marcas triangulares coincidan.
1
2
-
22
Opción 2 (con los tornillos)
Retire la tapa del detector y atorníllelaen el marco de la puerta.
Atornille el elemento magnético (B) en la puerta. Asegúrese de que las marcastriangulares coincidan. Recuerde: ¡La distancia entre ambas partes del sensor nodebe exceder los 15 mm!
Vuelva a ensamblar el detector (A).1
3
2
-
23
Sensores de movimiento
-
24
Antes de utilizar el producto, lea cuidadosamente este instructivo para evitar cualquier mal funcionamiento.
La información presentada sirve únicamente como referencia sobre el producto. Debido actualizaciones pueden existir diferencias. Consulte nuestra página web www.steren.com para obtener la versión más
reciente de este manual.
PRECAUCIONES
• Este aparato no se destina para utilizarse por personas (incluyendo niños) cuyas capacidades físicas, sensoriales o mentales sean diferentes o estén reducidas, o carezcan de experiencia o conocimiento.• Los niños deben supervisarse para asegurar que no empleen el aparato como juguete.• La empresa no se hace responsable por el uso indebido del contenido generado con este producto. • No extraiga la tarjeta microSD mientras las cámaras estén grabando; puede provocar mal funcionamiento y pérdida de datos. • No coloque objetos pesados sobre las cámaras. • No utilice productos químicos o corrosivos para limpiar las cámaras ni los sensores. • No instale las cámaras ni los sensores cerca de objetos magnéticos o que emitan mucho ruido. • No instale los dispositivos en intemperie.
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
-
25
especificacionesCámarasEntrada: 5 V - - - 2 AIluminación mínima: 0,5 luxCompresión de video: H.264 720 pFormato de audio: G.726Protocolo: TCP/IPRed inalámbrica: 802.11b/g/nCapacidad máxima de tarjeta micro SD: 64 GB (FAT32)
Sensores para puertaAlimentación: 1,5 V - - - (1 x AA)Corriente en reposo: < 2,5 µACorriente de operación: < 30 mAFrecuencia de operación: 433 MHzAlcance: Hasta 60 m (área abierta)
Sensores de movimientoAlimentación: 9 V - - - (1 x 6LR61)Corriente en reposo: < 25 µACorriente de operación: < 15 mAÁngulo de detección: 110°Frecuencia de operación: 433 MHzAlcance: Hasta 60 m (área abierta)Distancia de detección: 8 m
Control remotoAlimentación: 12 V - - - (1 x 27 A)Corriente en reposo: < 2,5 µACorriente de operación: < 15 mA
Temperatura de operación: -10°C a 50°CHumedad relativa: < 85% no condensada
Convertidor CA/CCEntrada: 100 – 240 V ~ 50 – 60 Hz 0,5 ASalida: 5 V - - - 2 A
Las especificaciones pueden cambiar sin previo aviso
-
Producto: Sistema de seguridad Wi-FiModelo: CCTV-2100Marca: Steren
Esta póliza garantiza el producto por el término de un año en todas sus partes y mano de obra, contra cualquier defecto de fabricación y funcionamiento a partir de la fecha de entrega.CONDICIONES1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V.2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.3.- El tiempo de reparación en ningún caso será mayor a 30 días,contados a partir de la recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente.
ESTA PÓLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTESCASOS:1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrónica Steren S.A. de C.V. El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial donde adquirió el producto. Si la presente garantía se extraviara, el consumidor puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra o factura respectiva.
DATOS DEL DISTRIBUIDORNombre del DistribuidorDomicilio Producto Marca ModeloNúmero de serie Fecha de entrega
ELECTRÓNICA STEREN S.A. DE C.V.Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco CDMX 02870, RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.Autopista México-Querétaro. Km 26.5 Sin número, Nave Industrial 3-A, Col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de México, C.P. 54020, RFC: SPE-941215-H43
-
Wi-Fi security system
User Manual
V0.0/0918v
-
29
INDEX
CONTENT ......................................................................................................29
GENERAL DESCRIPTION.............................................................................30
BATTERIES PLACEMENT.............................................................................31
BEFORE TO USE..........................................................................................32
SETTINGS OPTIONS.....................................................................................33 Wireless configuration (Wi-Fi)...................................................................33 Wired configuration (with network cable)................................................38
MONITORING.................................................................................................40
PAIRING THE SENSORS AND THE REMOTE CONTROL...........................42
ACTIVATE ALERTS........................................................................................44
INSTALLATION...............................................................................................46 Magnetic sensors.......................................................................................47 Motion sensors...........................................................................................49
-
30
CONTENt
Cameras
Magnetic sensors
Controls
Motion sensors
-
31
GENERAL description
Antennas
Microphone
Infrarress (nightshot)Lens
Alarm activated
Recording in micro SD card
Alarm by move detection activated
Network connection
Reset button
RJ45 portMicro SD card slot
Power input
-
32
batteries placement
Magnetic sensors
Motion sensors
Remote control
Slide the cover and insert an “AA” battery into the compartment. Place the cover again.
Remove the screw from the sensor to can remove the cover.
Remove the screw, and insert a 27A battery into the compartment. Place the cover again.
Take out the brooch connector. Connect a 9V battery and place it inside. Place the cover again.
-
33
before to use
» Insert a microSD card to storage photos and videos.
IEye-cameraZJinChang3.2
» Enter to the app store of your smartphone for download and install IEye o iEye-camera app.
» Open the app. Select Quick Register to create an user account.
This app is not Steren’s property, the company is not responsible by their working and updates.
-
34
SETTINGS OPTIONS
Before to configure the cameras, verify which is the band of your WiFi network, if is 2.4G you can choose any options of configuration. However, if the frequency is 5G, refear the “Wired configuration”.
Use the AC adapter to connect the camera into an outlet. After a few seconds, the camera will enter in standby mode and will emit tones (beeps) continuously.
Wireless configuration (Wi-Fi)
-
35
1. In your mobile enter to i-Eye* app. Press +
2. Select Add a new device. 3. Select SmartLink.
The showed pictures corresponding to an 7.0 Android device and iEye-camera (03.24.00.24) app. The icons, the interface configuration and the functions may vary according with the app version and the OS used.
-
36
4. Enter the password of the Wi-Fi network where your mobile is connected. Press Next.
If you can’t listen the tones, press the “RESET” button (localized in the bottom of the camera). Then, wait for a few seconds to the camera turn on and enter to the standby mode.
5. While the camera still in standby mode, that is to say, if it is emits tones continuously, select this option.
-
37
7. Enter a name for the camera and 123456 password; press Save.
Note: If during the standby connection, the camera not emits the tones by a moment and then restart it, or if the connection is failed, verify what the password that you enter is right and the frequency is 2.4 G.
6. Bring the mobile closer to the camera and press Next.
-
38
8. Press the screen to start to visualizing in real time. Go to the “Monitoring” section of this manual to know the main functions of the app.
Repeat the same process in the another camera.
-
39
» Use the AC adapter to connect the camera into an outlet. Then, connect it into a modem with a network cable.
1. Enter to iEye-camera app. After for a few seconds will appear this message:Search a new device; press › to continue.
If you can’t visualizing a new device, ensure what the network cable is connected rightly and restart the app.
Wired configuration (with network cable)
-
40
2. When the ID number appears press +
4. Once established the connection, will appear the next message:
Repeat the same process in the another camera.
5. Press the screen to start to visualizing in real time. Go to the “Monitoring” section of this manual to know the main functions of the app.
3. Enter a name for the camera and the password 123456; press Save.
-
41
Once synchronized both cameras, you can see it in the device list as shown below.
The message OnLine indicates that the camera is ready to using.
If activate or deactivate the alert with the remote control, you will have a standby time of 50 seconds, after this time the alert will remain activated.
MONITORing
Activate / deactivate Playback
reconrding
Defense activated Settings menu
Edit the camera name or delete it
Monitoring(Touch the image to start)
-
42
Next, you will monitoring in real time and control the camera movements.
Always adjust the vision angle of the camera by the app. If turn it manually, may damage the internal system.
Recording in the mobile memory (Its independent to the recording in the micro SD card)
Activate the microphone (press and hold while you speak)
Cut (Touch for take a screenshot)
Deactivate audio
Full screenResolution
Programming positions (5 postions)
SettingsBack
-
43
1. Enter the settings menu of the camera to you want add the sensors.
2. Press + to select the device type (sensor or remote control).
Magnetic and movement sensors
Remote control
pairing the sensors and the remote control
-
44
3. When the next message appear, turn on the selected device. Press Confirmed in the app, and shot the device repeatedly until appear the next message: Addition ok
The added sensor is will show under the added device type
4. Make the same process to add each sensor.
You can add the same sensors in the both cameras, only considerer what maximum distance between sensor and the camera don’t exceed 60 m (free of obstacles).
-
45
1. Enter to settings menu of the camera where you will activate the alerts and selec Alarm settings.
2. Activate or deactivate the options of your preference.
ACTIVATE ALERTS
Activate notificatin in the mobile
Accounts with notifications
Sound alarm timer
Activate/ deactivate sensor
Sensitivity adjust
Disable for Mexico
-
46
If you has activated the notifications in your mobile, you will receive alerts according with the selected config
-
47
INSTALlation
Camera
1
3 4
5
2
-
48
Magnetic sensors
Option 1 (with the adhesive plates)
Paste the sensor and the magnetic element over the plates.
Remember: The maximum distance between both parts don’t must exceed 15 mm!
Remove the protector cover from the plate and paste the detector (A) in the door frame; repeat the same process for the magnetic element (B) and place it into the door. Ensure that the triangle marks match.
1
2
-
49
Option 2 (with screws)
Remove the cover from the detectorand screw it in the door frame.
Screw the magnetic element (B) in the door. Ensure that the triangle marks match. Remember: The maximum distance between both parts don’t must exceed 15 mm!
Assamble the detector again (A).1
3
2
-
50
Motion sensors
-
51
Before to use the product, please read carefully this manual to avoid any malfunction.
The info in this manual is shown as reference. Consult our website www.steren.com to obtain the current version of this manual.
cautions
• The children should be supervised to ensure that don’t use it like a toy.• This device is not designed for be using by people (including children) with physical capacities, sensorial or mental reduced, or they don’t have the necessary experience or knowledge.• The company is not responsible by the bad use of the content generate with this product. • Don’t remove the microsd card while the cameras are recording; may cause bad working and lose of data.• Don’t place heavy objects over the cameras . • Always use a soft and dry cloth to clean it.• Don’t install it near of magnetic or noisier objects.• Don’t install it outdoor.
The operation of this equipment is subject to the following two conditions: (1) it is possible that this equipment or device may not cause harmful interference and (2) this equipment or device must accept any interference, including interference that may cause its undesired operation
-
52
specificationsCamerasInput: 5 V - - - 2 AMinimum light: 0.5 luxVideo compression: H.264 720pAudio format: G.726Protocol: TCP/IPWireless network: 802.11b/g/nMaximum capacity of micro SD card: 64 GB (FAT32)
Door sensorInput: 1.5 V - - - (1 x AA)Stand-by current: < 2.5 µAOperating current: < 30 mAOperating frequency: 433 MHzRange: up to 60 m (open area)
Motion sensorInput: 9 V - - - (1 x 6LR61)Stand-by current: < 25 µAOperating current: < 15 mADetection angle: 110°Operating frequency: 433 MHzRange: up to 60 m (open area)Detection range: 8 m
Remote controlInput: 12 V - - - (1 x 27A)Stand-by current: < 2.5 µAOperating current: < 15 mA
Operating temperature: -10°C to 50°CRH: < 85% non-condensed
AC/DC power converterInput: 100 – 240 V ~ 50 – 60 Hz 0.5AOutput: 5 V - - - 2 A
Specifications may change without previous notice
-
Product: Wi-Fi security systemNumber part: CCTV-2100Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase.
CONDITIONS1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when warranty service is required.2. If the product is in the warranty time, the company will repair it free of charge.3. The repairing time will not exceed 30 natural days, from the day the claim was received.4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorizedpersonnel, improper safe keeping, among others.a) The consumer can also claim the warranty service in the purchase establishment.b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________