site configuration manual-tp second phase
DESCRIPTION
Kashif KhattakTRANSCRIPT
![Page 1: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/1.jpg)
![Page 2: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/2.jpg)
USMS
Step 3: choose internet protocol (TCP/IP), double click it.
Step 4: set local laptop IP Address, and click “OK” IP Address: 10.72.88.100, subnet mask:255.255.0.0
2 第 2/2 页
![Page 3: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/3.jpg)
USMS
Step 5: click “ok”
Step 6: click “support”
3 第 3/3 页
![Page 4: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/4.jpg)
USMS
Step 7: check IP setting is successful or not, then click “close”
Part 2: Install EISU config software
Step 1: Find the file “ZXM10-EISUConfig software” in your laptop, Double click it.
4 第 4/4 页
![Page 5: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/5.jpg)
USMS
Step 2: Click “Next”
Step 3: click “Next”
5 第 5/5 页
![Page 6: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/6.jpg)
USMS
Step 4: Click “Install”
Step 5: Click “Finish”
6 第 6/6 页
![Page 7: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/7.jpg)
USMS
Part 3 : Download "v2para.tar.gz"
Step 1: Connect LAN cable between EISU MIP port and laptop LAN port.
Step 2: Open Eisuconfig software
Step 3: Click “scan server IP”
7 第 7/7 页
![Page 8: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/8.jpg)
USMS
Step 4: Wait a few seconds, Then IP will be obtained and show it in right interface
Step 5: Input password(11111111),and then click “login”
8 第 8/8 页
![Page 9: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/9.jpg)
Step 6: Please check the “”Channal Param config”menu . If the "1" position data, please skip "Part 3: Download" v2para.tar.gz " If the "1" position no data, perform "Step 7".
Step 7: Select”Device Mangement”.
Step8: Select”Device Mangement”.
![Page 10: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/10.jpg)
“2” position,please select "Download configuration”
. Download "v2para.tar.gz",Select FTP, FTP window will pop up. Please do not close.
Step8: Restart EISU.
![Page 11: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/11.jpg)
Part4 : Download "ATS Upgrade package"
Step 1: Login EISUconfig.
Step 2: Select”Device Mangement”.
![Page 12: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/12.jpg)
“2” position,please select "Updata package” . Please select the appropriate ATS.
Step 3: Click to “download”.
Step4: Restart EISU.
Step5: Check the ATS download situation, Select”VAS Configure”. If the "1" position data, the download was successful
![Page 13: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/13.jpg)
Part 5 : Check the fluid level,AC meter and DC meter. Check the fluid levelStep 1: Login EISUconfig.
Step 2: Select”Serial Port Management”, Select "COM1" Click “Read Serial Port Para”.
![Page 14: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/14.jpg)
1. "1" position Select "COM1"2. Click “Read Serial Port Para”.
Step 3: Check protocol.( The default protocol has been downloaded) If there is an protocol to skip "Step 4" If you did not. Click "Select DLL File", download protocol.
Step 4: Click "Select DLL File", download protocol. Click”Set Smart Port”
Step 5: Click “Read Serial Port Para”,”2” position Data needs and picture consistent, if not modify.( Configuration is
![Page 15: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/15.jpg)
complete, you need to restart EISU.)
Step 6: Click “Read”,Data is “1”. If it is not "1", click "Set" to modify.
Step 6: Click”Smart Channel Data”Click “Read Data”.
![Page 16: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/16.jpg)
If the "3" position display " DI-3000=1": Description sensor failure, check the wiring,Check” Step 5”.
If a large number of data, device is working properly.
Check AC meter
![Page 17: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/17.jpg)
Step 1: Login EISUconfig.
Step 2: Select”Serial Port Management”, Select "COM3" Click “Read Serial Port Para”.
Check protocol.( The default protocol has been downloaded) If not, please download protocol.( Reference fluid level Download protocol.)
Step 3: Click “Read Serial Port Para”,”2” position Data needs and picture consistent, if not modify.( Configuration is complete, you need to restart EISU.)
![Page 18: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/18.jpg)
Step 4: Click “Read”,Data is “1”. If it is not "1", click "Set" to modify.
Step 5: Click”Smart Channel Data”Click “Read Data”.
![Page 19: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/19.jpg)
If the "3" position display " DI-3000=1": Description sensor failure, check the wiring,Check” Step 3”.
If a large number of data, device is working properly.
Check DC meter Step 1: Login EISUconfig. Step 2: Select”Serial Port Management”, Select "Access Control"
Click “Read Serial Port Para”.
![Page 20: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/20.jpg)
Check protocol.( The default protocol has been downloaded) If not, please download protocol.( Reference fluid level Download protocol.)
Step 3: Click “Read Serial Port Para”,”2” position Data needs and picture consistent, if not modify.( Configuration is complete, you need to restart EISU.)
![Page 21: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/21.jpg)
Step 4: Click “Read”, Please set DC meter last 4 bit number.
Step 5: Click”Smart Channel Data”Click “Read Data”.
If the "3" position display "DI-3000=1": Description sensor failure, check the wiring,Check” Step 3”.
If a large number of data, device is working properly.
Part 6: Set VAS and FuelStep 1: Login EISUconfig.
Step 2: Select”Serial Port Management”Menu.
![Page 22: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/22.jpg)
Step 3: Select”gassline_monitor”Menu. Click”Param Config”.
Step4: Tank configuration parameters. Need to configure four positions. Reference Picture Settings.
![Page 23: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/23.jpg)
1. Position 1 Set the tank parameters
2. Position2 Set “No use”
3. Position3 Reference Picture Settings.
4. Position4 Set” Fuel Sensor Para”.
![Page 24: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/24.jpg)
Select “DeviceName”
Select”Channal 1”
5. Position5 Set” Oil Engine para”. Reference Picture Settings.
Step5:Set Fuel stealing para.
Step 6: In the lower right corner,First click "Save", the second click "Download".Step7: Restart EISU.
Step8: Reboot is complete, you need to wait 5 minutes.Step9: Check the channel.( Channel correctly, do not perform” Step9”—“ Step13”)
![Page 25: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/25.jpg)
Step10: If the channel is incorrect, please reconfigure the VAS.
Step11: Delete "gassline_monitor".
![Page 26: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/26.jpg)
Step12:Add “gassline_monitor”.
Step13: Repeat “Step 3”--- “Step 8”.
Part 7: Set EISU IDStep 1: Login EISUconfig.Step 2: Select”Network Setting”, Reading Network Information.
![Page 27: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/27.jpg)
Step 3: Set EISU ID.
Step5: Restart EISU.
![Page 28: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/28.jpg)
Part 8: RMS server information and SIM card
Step 1: Login EISUconfig.Step 2: Select”Wirless Management”, set picture parameter.
Server IP:10.218.207.7 Server port:9999(10 model site configure 9999, Other sites
configured to 9998) APN:zterms
Step 3: Test SIM card. Display "OK" normal network.
![Page 29: Site Configuration Manual-tp Second Phase](https://reader035.vdocuments.net/reader035/viewer/2022081503/5695d47c1a28ab9b02a19adc/html5/thumbnails/29.jpg)
Complete all configuration,Please contact "SyedTufailMazhar", he will configure the site in NMS