sitop power facets a&d se ps 22.01.2003 1 sitop power automation and drives sitop power flexi...
TRANSCRIPT
SITOP power facets A&D SE PS 22.01.2003 1
SITOP power
Automation and Drives
SITOP power flexiThe power pack handles it all - from 3 to 52V
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 2
SITOP power
Automation and Drives
SITOP power flexiSpecial features
Output voltage adjustable from 3 to 52 V By using a potentiometer or analog input signal (0 to 2.5 V) Can even be adjusted dynamically during operation
Max. output current adjustable from 2 to 10 A By using a potentiometer or analog input signal (0 to 2.5 V)
Current monitoring Output current depending on the analog signal (0 to 2.5 V) Red LED indicates when the set current limit is reached
Additional functions Automatic power limitation to 120 W Sense line for precise voltage to power load Power-ok signal provided as a relay contact Power-fail signal
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 3
SITOP power
Automation and Drives
SITOP power flexiApplication areas and customer advantages
One device for different applications
Lower logistics costs Easier to configure Easier to service
Standard device instead of special power pack For “non-standard” voltages between 3 and 52 Volt For applications, with a need for a direct current, which can
be changed dynamically lab applications, testing systems, control of DC motors etc.
For load control with integrated current monitoring As battery charger due to adjustable current limitation All the advantages of a standard SITOP power device
(e.g., industrial capability, ready to use, high quality, compliance with all pertinent international standards,)
Comparable price to standard Dc 24V/ 100 watt unit
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 4
SITOP power
Automation and Drives
SITOP power flexiOutput characteristic
0
10
20
30
40
50
60
0 2 4 6 8 10 12
Ampere
Vo
lt
1 )
2 )
1) Range of adjustment for output voltage2) Range of adjustment for current limiting
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 5
SITOP power
Automation and Drives
SITOP power dual 15VMounted quickly, even at ±15 V!
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 6
SITOP power
Automation and Drives
SITOP power dual 15VSpecial features and customer advantages
Industrial-capacity, compact device for the switching cabinet
Wide-range input (93 to 264 V AC) for worldwide use
Two floating outputs (15 V DC/3.5 A) Can be used in parallel for 15 V/ 7 A (single output) In series for ±15 V/ 3.5 A (dual output)
Simple compensation of power losses
Outputs adjustable from 14.5 to 17 V with potentiometer in front
Extremely easy to handle Fast mounting on standard DIN rail Easy wiring
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 7
SITOP power
Automation and Drives
SITOP power dual 15VApplication areas
General mechanical engineering Powering of electronics Powering of operation amplifiers
Laser processing machines Powering of deflection mirrors of laser heads
(e.g., with laser inscribers)
Measuring technology Powering of measuring converters
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 8
SITOP power
Automation and Drives
SITOP power 0.5 - Power out of 22.5 mmIdeal for low-voltage switchgear
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 9
SITOP power
Automation and Drives
SITOP power 0.5Special features
AC version: 24 V/ 0.5 A DC version: 24 V/ 0.375 A
Wide range input AC version:
Urated= 120 - 230V AC (87 ... 264V AC)
DC version: Urated= 48 - 220V DC (30 ... 264V DC, 30 ... 187V AC)
Width: 22.5 mm
Weight: 0.11 kg (AC) / 0.14 kg (DC)
Temperature range: -20° to +70° C
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 10
SITOP power
Automation and Drives
SITOP power 0.5Customer benefits
Space savings Due to narrow width and minimum space requirement Optimal for use in switching cabinet
Cost savings Due to use of 24 V standard contacter and relay types
for "odd" voltages Due to reduced number of models because of
wide-range input
Time savings due to availability from warehouseWorldwide use
Certifications in according with UL and cUL
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 11
SITOP power
Automation and Drives
SITOP power 2-phase 20AFor high network voltages
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 12
SITOP power
Automation and Drives
SITOP power 2-phase 20A Special features and application areas
24VDC /20 A DC for 3-phase networks in 480 and 575 VAC
2-phase power supply No need for line protection of third phase Single phasing doesn‘t require additional protection devices
as recommended with 3w-phase power supplies Wide- input voltage range from 420-682 VAC for ...
575 VAC 3-phase networks in the USA and Canada Highest protection against voltage fluctuations in case of unstable
network conditions
Adjustable output voltage from 22.8 to 28.8 V
Devices can be switched in parallel
Provides agency approvals for the North American market UL, cUL, CSA
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 13
SITOP power
Automation and Drives
Power supplies in SIMATIC design
Optimal for SIMATIC S7-200 AC 120/230 V, 24 V/ 3.5A RFI specification class B Parallel connection possible
Slim like the SIMATIC ET200B AC 120/230 V,
24 V/ 5 A and 10 A Optimal for use with
distributed I/O device Minimum width requirements
when used with a mounting bracket (2.5 inch width even for 10 amp unit))
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 14
SITOP power
Automation and Drives
Power supply with degree of protection IP65 Optimal for the SIMATIC ET 200X Single phase 120/230 VAC,
24 VDC/10A
Design adapted to SIMATIC ET200X 24 VDC via back plane bus for
electronics/ encoders and/or load
24 VDC via screw-type terminals for loads
Choice after short circuit: Automatic restart Switch off
For use under roughest conditions from -25 to +55°C
Can be installed in any position
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 15
SITOP power
Automation and Drives
SITOP power with direct current and universal connection
Direct current input (DC/DC 2A) For 48/60/110 V battery networks
via DC input 38 to 121 V
Universal connection (2.5/4/10 A) For 120 V and 230 V power
networks without switching thanks to wide-range input range from 93 to 264 V AC
For 220 VAC - battery systems. DC operation within 110 to 350 V possible
Parallel connection for redundancy and power increase
Design adapted to SIMATIC AG 95/100 (2.5/ 4A)
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i
SITOP power facets A&D SE PS 22.01.2003 16
SITOP power
Automation and Drives
Power supplies for AS-interface
30 VDC /2.4 A in class of protection IP 65 Input voltage
from 20.4 to 28.VDC Only 57 mm mounting depth No mounting restrictions Ambient temperature
from -25° to +55°C
30 V/7 A with wide input voltage range from 93 to 264 VAC or 110 to 350 VDC Can be snapped on standard DIN rail or specific S7-300 rail
Data buffering according to the AS-i specification
Also suitable for public low voltage networks
SITOP power flexi
SITOP power dual
SITOP power 0.5
2-phase 20A
In SIMATIC design
DC/UC- Input
For AS-i