skid steer loader multi terrain loaders compact … · 15-2 edition 44 skid steer loaders features:...

© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

800.437.4228www.hawthornecat.com

Caterpillar® Performance

Handbook Edition 44

SKID STEER LOADER

MULTI TERRAIN LOADERS

COMPACT TRACK

LOADERS

15

CONTENTSSKID STEER LOADERS/MULTI TERRAIN LOADERS/COMPACT TRACK LOADERS

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2 SSL Specifications . . . . . . . . . . . . . . . . . . . . . . . 15-3 SSL Performance Data . . . . . . . . . . . . . . . . . . . 15-6 SSL Dimensions. . . . . . . . . . . . . . . . . . . . . . . . 15-31 SSL Work Tool Compatibility. . . . . . . . . . . . . 15-34 MTL Specifications . . . . . . . . . . . . . . . . . . . . . 15-37 MTL Performance Data . . . . . . . . . . . . . . . . . 15-39 MTL Dimensions . . . . . . . . . . . . . . . . . . . . . . 15-51 MTL Work Tool Compatibility. . . . . . . . . . . . 15-53 CTL Specifications . . . . . . . . . . . . . . . . . . . . . 15-56 CTL Performance Data. . . . . . . . . . . . . . . . . . 15-58 CTL Dimensions . . . . . . . . . . . . . . . . . . . . . . . 15-73 CTL Work Tool Compatibility . . . . . . . . . . . . 15-75

Work Tools: Augers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-78 Brushcutters. . . . . . . . . . . . . . . . . . . . . . . . . . . 15-81 Cold Planers. . . . . . . . . . . . . . . . . . . . . . . . . . . 15-83 Landscape Tillers. . . . . . . . . . . . . . . . . . . . . . . 15-86 Landscape Rakes . . . . . . . . . . . . . . . . . . . . . . . 15-88 Mulchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-90 Power Box Rakes . . . . . . . . . . . . . . . . . . . . . . . 15-92 Trenchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-94 Vibratory Compactors. . . . . . . . . . . . . . . . . . . 15-97 Brooms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-99 Stump Grinders . . . . . . . . . . . . . . . . . . . . . . . 15-102 Angle Blades . . . . . . . . . . . . . . . . . . . . . . . . . 15-105 Backhoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-106 Material Handling Arm. . . . . . . . . . . . . . . . . 15-107 Snow Blowers. . . . . . . . . . . . . . . . . . . . . . . . . 15-108 Wheel Saws . . . . . . . . . . . . . . . . . . . . . . . . . . 15-109

SKID STEER LOADERSMULTI TERRAIN LOADERS

COMPACT TRACK LOADERS

Edition 44 15-1

PHB-Sec15-14.indd 1PHB-Sec15-14.indd 1 12/20/13 8:52 AM12/20/13 8:52 AM

15-2 Edition 44

Skid Steer Loaders

Features:● Cat® engines provide high horsepower, torque and

S•O•SSM oil sampling ports standard.

● Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environ ment with excellent Work Tool visibility on D Series machines.

● Ergonomically designed cab provides maximum oper-ator comfort and visibility.

● Low-effort joystick controls, arm rest and retract able seat belt for easy operation.

● Available high-back, heated, air ride seat with seat mounted adjustable joystick controls make the D Series machines the industry leaders in operator comfort.

● Deep skid resistant steps and two tilt cylinders makes egress/ingress easy.

● Hand and foot throttle for continuous or variable engine speed.

● Anti-stall feature (B3 Series) and Electronic Torque Man age ment (D Series) provide maximum rim pull and hydraulic power while lugging the engine.

● High hydraulic horsepower gets work done quickly.

● Direct drive hystat pumps eliminate drive belts.

● Ground level access to all daily service and routine main tenance points helps reduce machine downtime for greater productivity.

● High performance power train provides maximum performance and production capability on D Series machines through the Electronic Torque Manage-ment system, optional two speed travel and an indus-try exclusive electronic hand/foot throttle with decel pedal capability.

● Cat “Intelligent Leveling” system (ILEV) provides indus try leading technology, integration and optional features on D Series machines such as dual direction self level, work tool return to dig and work tool positioner.

● Speed Sensitive Ride Control option on D Series machines improves operation on rough terrain, enabl-ing better load retention, increased productivity and greater operator comfort.

● Maximize machine capability and control with optional Advanced Display providing on-screen adjustment capability on D Series machines for implement response, hystat response, and creep control, multi-language func-tionality with customizable layouts, security system, and rearview camera.

● High performance cooling systems and extended life coolant, along with high performance engine and hydraulic oils, extend service intervals for low oper-ating costs.

● Deutsch electrical connectors are color coded, num-bered and protected with nylon braiding.

● Electro-depositioned or “E” coat corrosion protection for long paint life.

● High flow XPS hydraulics are optional on most D Series machines. The XHP hydraulic package option on the 272D and 299D combines the high pressure of XPS with even higher flow for the most demanding hydro-me chan ical work tool applications such as mulching, cold planing, and wheel saw cutting.

● High flow hydraulics on the 226B3, 236D, 242D, 257D, and 259D operate more demanding, rotating work tools such as brooms, cold planers, trenchers, land-scape rakes, power rakes, tillers, snow blowers, brush cutters, and stump grinders.

Features


Edition 44 15-3

Skid Steer Loaders Specifications

15

MODEL 216B3 226B3Flywheel Power: Net 35 kW 48 hp 42 kW 56 hp

Flywheel Power: Gross 38 kW 51 hp 46 kW 62 hp

Engine Model C2.2 C2.2 T

Rated Engine RPM 3000 3000

Bore 84 mm 3.3" 84 mm 3.3"

Stroke 100 mm 3.9" 100 mm 3.9"

Displacement 2.2 L 134 in3 2.2 L 134 in3

No. Cylinders 4 4

One Speed Forward 0-12.7 km/h 0-7.9 mph 0-12.7 km/h 0-7.9 mph

One Speed Reverse 0-12.7 km/h 0-7.9 mph 0-12.7 km/h 0-7.9 mph

Hydraulic Cycle Time, Empty Bucket: Seconds Seconds

Raise 2.7 2.7

Dump 2.1 2.1

Lower (Empty, Float Down) 2.7 2.7

Total 7.5 7.5

Tread Width 1244 mm 4'1" 1244 mm 4'1"

Width Over Tires 1525 mm 5'0" 1525 mm 5'0"

Ground Clearance 195 mm 8.0" 195 mm 8.0"

Fuel Tank Capacity 58 L 15.4 U.S. gal 58 L 15.4 U.S. gal

Hydraulic Tank Capacity 35 L 9.2 U.S. gal 35 L 9.2 U.S. gal

Hydraulic System Capacity (includes tank) 55 L 14.5 U.S. gal 55 L 14.5 U.S. gal

Hydraulic Pump Capacity 61 L/min 16 gpm 61 L/min 16 gpm



MODEL 236D 242D 246DFlywheel Power:

Gross (SAE J1995) 55.4 kW 74.3 hp 55.4 kW 74.3 hp 55.4 kW 74.3 hp

Net (SAE 1349) 54.6 kW* 73.2 hp* 54.6 kW* 73.2 hp* 54.6 kW* 73.2 hp*

Net (SAE 1349) 54.2 kW† 72.7 hp† 54.2 kW† 72.7 hp† 54.0 kW† 72.4 hp†

Net (SAE 1349) 53.8 kW# 72.1 hp# 53.8 kW# 72.1 hp# 53.6 kW# 71.8 hp#

Engine Model C3.3B DIT C3.3B DIT C3.3B DIT

Rated Engine RPM 2400 2400 2400

Bore 94 mm 3.7" 94 mm 3.7" 94 mm 3.7"

Stroke 120 mm 4.7" 120 mm 4.7" 120 mm 4.7"

Displacement 3.3 L 203 in3 3.3 L 203 in3 3.3 L 203 in3

No. Cylinders 4 4 4

One Speed Forward 0-11.2 km/h 0-7.0 mph 0-12.1 km/h 0-7.5 mph 0-12.5 km/h 0-7.7 mph

Two Speed Forward 0-17.1 km/h 0-10.6 mph 0-18.5 km/h 0-11.5 mph 0-17.7 km/h 0-11.0 mph

One Speed Reverse 0-11.2 km/h 0-7.0 mph 0-12.1 km/h 0-7.5 mph 0-12.5 km/h 0-7.7 mph

Two Speed Reverse 0-17.1 km/h 0-10.6 mph 0-18.5 km/h 0-11.5 mph 0-17.7 km/h 0-11.0 mph

Hydraulic Cycle Time, Empty Bucket: Seconds Seconds Seconds

Raise 3.1 4.4 3.1

Dump 2.4 2.4 2.5

Lower (Empty, Float Down) 3.6 3.6 4.0

Total 9.1 10.4 9.6

Tread Width, Standard 1371 mm 54" 1371 mm 54" 1371 mm 54"

Width Over Tires 1676 mm 66" 1676 mm 66" 1676 mm 66"

Ground Clearance 195 mm 7.7" 222 mm 8.7" 226 mm 8.9"

Fuel Tank Capacity 105 L 27.7 U.S. gal 105 L 27.7 U.S. gal 94 L 24.8 U.S. gal

Hydraulic Tank Capacity 39 L 10.3 U.S. gal 39 L 10.3 U.S. gal 39 L 10.3 U.S. gal

Hydraulic System Capacity (includes tank) 50 L 13.2 U.S. gal 50 L 13.2 U.S. gal 52 L 13.7 U.S. gal

Hydraulic Pump Capacity, Standard 76 L/min 20 gpm 76 L/min 20 gpm 86 L/min 23 gpm

Hydraulic Pressure, Standard 23 000 kPa 3335 psi 23 000 kPa 3335 psi 23 000 kPa 3335 psi

Hydraulic Pump Capacity, XPS 112 L/min 30 gpm 112 L/min 30 gpm 121 L/min 32 gpm

Hydraulic Pressure, XPS 23 000 kPa 3335 psi 23 000 kPa 3335 psi 28 000 kPa 4061 psi

*HRC engine meeting U.S. EPA Tier 4 Final (EU Stage IIIB) emission standards.†Tier 4 Interim equivalent LRC engine offered only for Canada, Australia/New Zealand, Macedonia, Ukraine and South Korea.#LRC engine.

15-4 Edition 44


15


MODEL 262D 272D 272D XHPFlywheel Power:

Gross (SAE J1995) 55.4 kW 74.3 hp 73 kW 98 hp 82 kW 110 hp

Net (SAE 1349) 54.6 kW* 73.2 hp* 71 kW 95 hp 79 kW 106 hp

Net (SAE 1349) 54.0 kW† 72.4 hp† — —

Net (SAE 1349) 53.6 kW# 71.8 hp# — —

Engine Model C3.3B DIT C3.8 DIT C3.8 DIT


Bore 94 mm 3.7" 100 mm 3.9" 100 mm 3.9"

Stroke 120 mm 4.7" 120 mm 4.7" 120 mm 4.7"


No. Cylinders 4 4 4






Raise 4.6 5.2 4.4

Dump 2.3 2.3 2.0


Total 10.9 12.1 11.1

Tread Width, Standard 1371 mm 54" 1524 mm 60" 1524 mm 60.7"








Hydraulic Pump Capacity, XPS 121 L/min 32 gpm 121 L/min 32 gpm —

Hydraulic Pressure, XPS 28 000 kPa 4061 psi 28 000 kPa 4061 psi —

Hydraulic Pump Capacity, XHP — — 150 L/min 40 gpm

Hydraulic Pressure, XHP — — 28 000 kPa 4061 psi


Edition 44 15-5


15-6 Edition 44

Skid Steer Loaders Performance Data● 216B3/226B3

Bucket Type General Purpose Multi-PurposeBucket Width 1520 mm (60") 1680 mm (66") 1520 mm (60")Tire Size 10 × 16.5 10 × 16.5 10 × 16.5Ground Engaging Type Holes

OnlyBolt-on

EdgeBolt-on Teeth

Holes Only

Bolt-on Edge

Bolt-on Teeth

Holes Only

Bolt-on Edge

Bucket Assembly No. 165-6152 152-0224 152-0223 165-6153 152-0226 152-0225 154-5004 154-5045Rated bucket capacity m3 0.36 0.37 0.36 0.40 0.40 0.41 0.30 0.31

yd3 0.47 0.48 0.47 0.52 0.52 0.53 0.39 0.41Struck capacity m3 0.26 0.27 0.26 0.29 0.29 0.29 0.22 0.22

yd3 0.34 0.35 0.34 0.38 0.38 0.38 0.29 0.29Width mm 1576 1586 1576 1730 1740 1730 1595 1595

in 62 62 62 68 68 68 63 63Dump clearance at maximum lift/dump mm 2133 2103 2069 2130 2100 2066 2122 2092

in 84 83 81 84 83 81 84 82Reach at maximum lift/dump mm 546 557 620 549 560 623 560 571

in 21 22 24 22 22 25 22 22Floor angle at maximum lift/dump degrees 39.9° 39.9° 39.9° 40° 40° 40° 40.2° 40.2°Floor angle at maximum lift/rack back degrees 96.7° 96.7° 96.7° 96.5° 96.5° 96.5° 96.4° 96.4°Clearance at maximum lift/level bucket mm 2658 2642 2657 2656 2640 2655 2655 2683

in 105 104 105 105 104 105 105 106Hinge pin height at maximum lift mm 2849 2849 2849 2849 2849 2849 2849 2849

in 112 112 112 112 112 112 112 112Maximum overall height mm 3762 3790 3860 3759 3787 3857 3746 3774

in 148 149 152 148 149 152 147 149Reach at level lift arm/bucket mm 1333 1361 1431 1335 1363 1433 1346 1374

in 52 54 56 53 54 56 53 54Maximum floor angle at minimum lift degrees 26.1° 26.1° 26.1° 26° 26° 26° 25.8° 25.8°Dig depth with level bucket mm 0 16 1 0 16 1 0 15

in 0.0 0.6 0.0 0.0 0.6 0.0 0.0 0.6Overall length with bucket on ground mm 3286 3314 3384 3286 3314 3384 3290 3318

in 129 130 133 129 130 133 130 131Front clearance circle radius

(with bucket)mm 1989 2016 2079 2021 2048 2110 1992 2020

in 78 79 82 80 81 83 78 80Tipping load

216B3kg 1213 1158 1187 1194 1140 1171 1074 1031lb 2673 2554 2616 2631 2513 2582 2367 2272

226B3kg 1293 1238 1267 1274 1219 1251 1153 1109lb 2850 2729 2792 2808 2688 2759 2541 2445

Breakout force — lift216B3

kg 1437 1389 1421 1424 1374 1408 1330 1286lb 3168 3062 3132 3140 3030 3104 2932 2835

226B3kg 1437 1389 1421 1424 1374 1408 1330 1286lb 3168 3062 3132 3140 3030 3104 2932 2835

Breakout force — tilt216B3

kg 1700 1596 1681 1694 1590 1677 1631 1539lb 3747 3518 3705 3735 3506 3697 3596 3393

226B3kg 1700 1596 1681 1694 1590 1677 1631 1539lb 3747 3518 3705 3735 3506 3697 3596 3393

Operating weight216B3

kg 2637 2667 2654 2654 2687 2670 2769 2798lb 5814 5880 5850 5851 5924 5887 6103 6169

226B3kg 2669 2699 2686 2686 2719 2702 2801 2830lb 5885 5951 5921 5922 5994 5958 6174 6240


15

Edition 44 15-7

Skid Steer LoadersPerformance Data● 216B3/226B3

Bucket Type Multi-Purpose DirtBucket Width 1520 mm 1680 mm 1520 mm 1680 mm

(60") (66") (60") (66")Tire Size 10 × 16.5 10 × 16.5 10 × 16.5 10 × 16.5Ground Engaging Type Bolt-on

TeethHoles Only

Bolt-on Edge

Bolt-on Teeth

Holes Only

Bolt-on Edge

Holes Only

Bolt-on Edge



yd3 0.29 0.31 0.33 0.31 0.33 0.33 0.35 0.35Width mm 1595 1749 1749 1749 1576 1586 1730 1740


in 81 84 82 81 85 84 85 84Reach at maximum lift/dump mm 634 560 571 634 505 520 505 520

in 25 22 22 25 20 20 20 20Floor angle at maximum lift/dump degrees 40.2° 40.2° 40.2° 40.2° 39.9° 39.9° 39.9° 39.9°Floor angle at maximum lift/rack back degrees 96.4° 96.4° 96.4° 96.4° 96.7° 96.7° 96.7° 96.7°Clearance at maximum lift/level bucket mm 2654 2655 2683 2654 2661 2648 2661 2648

in 104 105 106 104 105 104 105 104Hinge pin height at maximum lift mm 2849 2849 2849 2849 2849 2849 2849 2849

in 112 112 112 112 112 112 112 112Maximum overall height mm 3844 3746 3774 3844 3709 3739 3709 3739

in 151 147 149 151 146 147 146 147Reach at level lift arm/bucket mm 1444 1346 1374 1444 1280 1310 1280 1310

in 57 53 54 57 50 52 50 52Maximum floor angle at minimum lift degrees 25.8° 25.8° 25.8° 25.8° 26.1° 26.1° 26.1° 26.1°Dig depth with level bucket mm 1 0 16 1 0 16 0 16

in 0.0 0.0 0.6 0.0 0.0 0.6 0.0 0.6Overall length with bucket on ground mm 3388 3290 3318 3388 3233 3263 3233 3263

in 133 130 131 133 127 128 127 128Front clearance circle radius

(with bucket)mm 2083 1992 2020 2113 1940 1970 1970 2000

in 82 78 80 83 76 78 78 79Tipping load

216B3kg 1058 1053 1001 1032 1304 1251 1280 1223lb 2332 2321 2207 2275 2875 2758 2823 2696

226B3kg 1137 1132 1079 1111 1386 1332 1363 1304lb 2506 2495 2379 2449 3056 2937 3004 2875

Breakout force — lift216B3

kg 1316 1314 1265 1298 1515 1466 1495 1444lb 2900 2896 2789 2860 3339 3232 3295 3183

226B3kg 1316 1314 1265 1298 1515 1466 1495 1444lb 2900 2896 2789 2860 3339 3232 3295 3183

Breakout force — tilt216B3

kg 1620 1618 1518 1601 1853 1740 1842 1727lb 3571 3568 3346 3529 4084 3835 4061 3807

226B3kg 1620 1618 1518 1601 1853 1740 1842 1727lb 3571 3568 3346 3529 4084 3835 4061 3807


kg 2785 2787 2820 2803 2579 2609 2604 2637lb 6139 6144 6216 6180 5685 5751 5740 5813

226B3kg 2817 2819 2852 2835 2611 2641 2636 2669lb 6210 6215 6287 6251 5756 5822 5811 5883


15-8 Edition 44

Skid Steer Loaders Performance Data● 216B3/226B3

Work Tool Pallet ForkTine Length 910 mm (36") 1070 mm (42") 1220 mm (48")Tire Size 10 × 16.5 10 × 16.5 10 × 16.5Carriage Assembly No. 353-1694 353-1696 353-1697Carriage overall width without step mm 1157 1157 1157

in 45 45 45Carriage step additional width mm 108 108 108

in 4.25 4.25 4.25Carriage height above blade top mm 923.5 923.5 923.5

in 36.4 36.4 36.4Blade surface height at

maximum heightmm 2741 2741 2741

in 107.9 107.9 107.9Shank front face reach at

maximum heightmm 290 290 290

in 11.4 11.4 11.4Blade surface height at level lift arms mm 1383 1383 1383

in 54.4 54.4 54.4Shank front face reach at level lift arms mm 743 743 743

in 29.3 29.3 29.3Blade surface height at minimum lift mm 91 91 91

in 3.6 3.6 3.6Shank front face reach at minimum lift mm 345 345 345

in 13.6 13.6 13.6Overall length at minimum lift,

level tinemm 3602 3762 3912

in 141.8 148.1 154.0Tipping load

216B3kg 949 894 846lb 2093 1970 1864

226B3kg 1012 953 903lb 2230 2102 1990


kg 2620 2630 2640lb 5775 5798 5820

226B3kg 2652 2662 2672lb 5846 5869 5890


15

Edition 44 15-9

Skid Steer LoadersPerformance Data● 236D

Bucket Type General Purpose: Bolt-on EdgeBucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")Tire Size 10 × 16.5 10 × 16.5 10 × 16.5Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5365 279-5369 279-5373Rated bucket capacity m3 0.36 0.40 0.44

yd3 0.47 0.52 0.58Struck capacity m3 0.27 0.29 0.31

yd3 0.35 0.38 0.41Width mm 1586 1740 1893

in 62.4 68.5 74.5Dump clearance at maximum lift/dump mm 2295 2293 2292

in 90.4 90.3 90.2Reach at maximum lift/dump mm 407 410 410

in 16.0 16.1 16.2Floor angle at maximum lift/dump degrees –46.9 –47.0 –47.0Floor angle at maximum lift/rack back degrees 87.6 87.6 87.6Clearance at maximum lift/level bucket mm 2908 2906 2905

in 114.5 114.4 114.4Hinge pin height at maximum lift mm 3120 3118 3118

in 122.8 122.8 122.7Maximum overall height mm 4063 4061 4061

in 160.0 159.9 159.9Reach at level lift arm/bucket mm 1419 1422 1423

in 55.9 56.0 56.0Maximum floor angle at minimum lift degrees 23.4 23.4 23.4Dig depth with level bucket mm –23 –25 –26

in –0.9 –1.0 –1.0Overall length with bucket on ground mm 3575 3575 3575

in 140.8 140.8 140.8Front clearance circle radius

(with bucket)mm 2229 2258 2288

in 87.8 88.9 90.1Tipping load kg 1535.3 1483.8 1466.8

lb 3385 3271 3234Breakout force — lift kg 1676.0 1641.4 1629.6

lb 3695 3619 3593Breakout force — tilt kg 2040.2 2017.0 2007.9

lb 4498 4447 4427Operating weight kg 2979.4 3030.8 3046.3

lb 6568 6682 6716


15-10 Edition 44

Bucket Type Multi-Purpose: Bolt-on EdgeBucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")Tire Size 10 × 16.5 10 × 16.5 10 × 16.5Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5381 279-5391 279-5399Rated bucket capacity m3 0.30 0.34 0.37


yd3 0.29 0.33 0.34Width mm 1595 1749 1902















lb 6926 6976 7026

Performance Data● 236D

Skid Steer Loaders


15

Edition 44 15-11


Bucket Type Dirt: Bolt-on EdgeBucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")Tire Size 10 × 16.5 10 × 16.5 10 × 16.5Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5438 279-5441 285-6090Rated bucket capacity m3 0.34 0.37 0.41


yd3 0.33 0.35 0.39Width mm 1586 1740 1893















lb 6571 6632 6667

Skid Steer Loaders


15-12 Edition 44



in 45.7 45.7 45.7Carriage step additional width mm 106 106 106

in 4.2 4.2 4.2Carriage height above blade top mm 926 926 926

in 36.5 36.5 36.5Blade surface height at maximum height mm 3020 3021 3022

in 118.9 119.0 119.0Shank front face reach at maximum height mm 235 237 239





in 17.2 17.2 17.2Overall length at minimum lift, level tine mm 3861 4021 4171



lb 6508 6531 6552

Skid Steer Loaders


15

Edition 44 15-13




yd3 0.35 0.38 0.41Width mm 1586 1740 1893















lb 6989 7103 7137

Skid Steer Loaders


15-14 Edition 44




yd3 0.29 0.33 0.34Width mm 1595 1749 1902















lb 7347 7397 7447

Skid Steer Loaders


15

Edition 44 15-15




yd3 0.33 0.35 0.39Width mm 1586 1740 1893















lb 6991 7053 7088

Skid Steer Loaders


15-16 Edition 44














lb 6929 6952 6973

Skid Steer Loaders


15

Bucket Type General Purpose: Bolt-on EdgeBucket Width 1680 mm (66") 1830 mm (72") 1981 mm (78") 2134 mm (84")Tire Size 12 × 16.5 12 × 16.5 12 × 16.5 12 × 16.5Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5369 279-5373 279-5377 296-8192Rated bucket capacity m3 0.40 0.44 0.48 0.63

yd3 0.52 0.58 0.63 0.82Struck capacity m3 0.29 0.31 0.32 0.59

yd3 0.38 0.41 0.42 0.77Width mm 1740 1893 2045 2198

in 68.5 74.5 80.5 86.5Dump clearance at maximum lift/dump mm 2405 2404 2404 2343

in 94.7 94.7 94.6 92.3Reach at maximum lift/dump mm 625 626 626 700

in 24.6 24.6 24.7 27.6Floor angle at maximum lift/dump degrees –37.9 –38.0 –38.0 –38.0Floor angle at maximum lift/rack back degrees 97.1 97.1 97.1 97.0Clearance at maximum lift/level bucket mm 2940 2939 2939 2936

in 115.7 115.7 115.7 115.6Hinge pin height at maximum lift mm 3150 3150 3150 3148

in 124.0 124.0 124.0 124.0Maximum overall height mm 4114 4114 4113 4205

in 162.0 162.0 161.9 165.6Reach at level lift arm/bucket mm 1468 1469 1469 1564

in 57.8 57.8 57.8 61.6Maximum floor angle at minimum lift degrees 26.6 26.6 26.6 26.6Dig depth with level bucket mm –14 –14 –15 –17

in –0.6 –0.6 –0.6 –0.7Overall length with bucket on ground mm 3792 3792 3792 3885

in 149.3 149.3 149.3 153.0Front clearance circle radius

(with bucket)mm 2259 2290 2322 2436

in 88.9 90.1 91.4 95.9Tipping load kg 1871.4 1854.3 1839.8 1764.7

lb 4126 4088 4056 3891Breakout force — lift kg 2089.4 2077.5 2069.4 1902.4

lb 4606 4580 4562 4194Breakout force — tilt kg 2947.3 2938.1 2934.0 2612.4

lb 6498 6477 6468 5759Operating weight kg 3423.1 3438.6 3452.9 3489.8

lb 7547 7581 7612 7694

Edition 44 15-17


Skid Steer Loaders


15-18 Edition 44




yd3 0.33 0.34 0.37Width mm 1749 1902 2045















lb 7841 7891 7935

Skid Steer Loaders


15



yd3 0.35 0.39 0.42Width mm 1740 1893 2045















lb 7496 7532 7570

Edition 44 15-19


Skid Steer Loaders


15-20 Edition 44














lb 7373 7396 7417

Skid Steer Loaders


15

Edition 44 15-21


Bucket Type General Purpose: Bolt-on EdgeBucket Width 1680 mm (66") 1830 mm (72") 1981 mm (78") 2134 mm (84")Tire Size 12 × 16.5 12 × 16.5 12 × 16.5 12 × 16.5Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5369 279-5373 279-5377 296-8192Rated bucket capacity m3 0.40 0.44 0.48 0.63


yd3 0.38 0.41 0.42 0.77Width mm 1740 1893 2045 2198










(with bucket)mm 2259 2290 2322 2436





lb 8085 8119 8151 8232

Skid Steer Loaders


15-22 Edition 44




yd3 0.33 0.34 0.37Width mm 1749 1902 2045















lb 8379 8430 8473

Skid Steer Loaders


15

Edition 44 15-23




yd3 0.35 0.39 0.42Width mm 1740 1893 2045















lb 8035 8071 8109

Skid Steer Loaders


15-24 Edition 44














lb 7912 7935 7956

Skid Steer Loaders


15

Edition 44 15-25




yd3 0.41 0.42 0.77Width mm 1893 2045 2198



in 31.9 32.0 34.3Floor angle at maximum lift/dump degrees 51.1 51.1 51.1Floor angle at maximum lift/rack back degrees 83.1 83.1 83.1Clearance at maximum lift/level bucket mm 3013 3013 3009





in –0.7 –0.7 –0.8Overall length with bucket on ground mm 3947 –3948 –4041

in 155.4 –155.4 –159.1Front clearance circle radius






lb 8356 8387 8468

Skid Steer Loaders


15-26 Edition 44


Bucket Type Multi-Purpose: Bolt-on Edge Dirt: Bolt-on EdgeBucket Width 1830 mm (72") 1981 mm (78") 1830 mm (72") 1981 mm (78")Tire Size 12 × 16.5 12 × 16.5 12 × 16.5 12 × 16.5Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5399 279-5402 285-6090 268-4083Rated bucket capacity m3 0.37 0.40 0.41 0.44


yd3 0.34 0.37 0.39 0.42Width mm 1902 2045 1893 2045



in 32.2 32.3 30.7 30.7Floor angle at maximum lift/dump degrees 51.1 51.1 51.1 51.1Floor angle at maximum lift/rack back degrees 83.1 83.1 83.1 83.1Clearance at maximum lift/level bucket mm 3004 3004 3017 3016





in –0.9 –1.0 –0.6 –0.6Overall length with bucket on ground mm –3954 –3954 –3895 –3895

in –155.7 –155.7 –153.3 –153.3Front clearance circle radius

(with bucket)mm 2355 2386 2306 2338





lb 8666 8710 8307 8345

Skid Steer Loaders


15

Edition 44 15-27














lb 8148 8171 8192

Skid Steer Loaders


15-28 Edition 44

Performance Data● 272D XHP



yd3 0.41 0.42 0.77Width mm 1893 2045 2198



in 30.4 30.4 32.7Floor angle at maximum lift/dump degrees 51.1 51.1 51.1Floor angle at maximum lift/rack back degrees 83.1 83.1 83.1Clearance at maximum lift/level bucket mm 3054 3053 3050





in –0.7 –0.7 –0.8Overall length with bucket on ground mm –3929 –3929 –4022

in –154.7 –154.7 –158.4Front clearance circle radius






lb 9339 9370 9452

Skid Steer Loaders


15

Edition 44 15-29


Bucket Type Multi-Purpose: Bolt-on Edge Dirt: Bolt-on EdgeBucket Width 1830 mm (72") 1981 mm (78") 1830 mm (72") 1981 mm (78")Tire Size 14 × 17.5 14 × 17.5 14 × 17.5 14 × 17.5Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5399 279-5402 285-6090 268-4083Rated bucket capacity m3 0.37 0.40 0.41 0.44


yd3 0.34 0.37 0.39 0.42Width mm 1902 2045 1893 2045



in 30.7 30.7 29.1 29.2Floor angle at maximum lift/dump degrees 51.1 51.1 51.1 51.1Floor angle at maximum lift/rack back degrees 83.1 83.1 83.1 83.1Clearance at maximum lift/level bucket mm 3046 3045 3057 3056





in –0.9 –0.9 –0.5 –0.6Overall length with bucket on ground mm –3936 –3936 –3876 –3876

in –155.0 –154.9 –152.6 –152.6Front clearance circle radius

(with bucket)mm 2355 2386 2306 2338





lb 9649 9693 9290 9328

Skid Steer Loaders


15-30 Edition 44














lb 9131 9154 9175

Skid Steer Loaders


15

Edition 44 15-31

Dimensions● 216B3/226B3

Skid Steer Loaders

MODEL 216B3 226B3Rated operating capacity* 635 kg 1400 lb 680 kg 1500 lb

A Height to top of ROPS 1950 mm 6'5" 1950 mm 6'5"B Length to coupler 2519 mm 8'3" 2519 mm 8'3"C Length with bucket on ground 3233 mm 10'7" 3233 mm 10'7"D Maximum overall height 3709 mm 12'2" 3709 mm 12'2"E Ground clearance 195 mm 8" 195 mm 8"F Departure angle 26° 26°G Wheelbase 986 mm 3'3" 986 mm 3'3"H Bumper overhang from axle 967 mm 3'2" 967 mm 3'2"

Bucket overall width 1524 mm 5'2" 1524 mm 5'2"J Clearance at maximum lift/dump 2169 mm 7'1" 2169 mm 7'1"K Floor angle at maximum lift/dump 40° 40°L Floor angle at maximum lift/rack 96.7° 96.7°M Clearance at maximum lift/level 2661 mm 8'9" 2661 mm 8'9"N Hinge pin height at maximum lift 2854 mm 9'4" 2854 mm 9'4"O Reach at level lift arm/bucket 1280 mm 4'2" 1280 mm 4'2"

Hinge pin height at carry position 239 mm 9.3" 239 mm 9.3"Maximum floor angle at carry position 27.7° 27.7°

*SAE J818 MAY87, ISO 5998:1986.NOTE: 216B3/226B3 machine dimensions shown with standard machine equipped with optional 10 × 16.5 10 PR tires and 1520 mm (60") dirt bucket.


15-32 Edition 44

Dimensions● 236D/242D/246D

Skid Steer Loaders

MODEL236D

(10 × 16.5 tires) 242D 246DOperating weight 2975 kg 6559 lb 3166 kg 6980 lb 3368 kg 7424 lbRated operating capacity 818 kg 1800 lb 975 kg 2150 lb 975 kg 2150 lbTipping load 1633 kg 3600 lb 1950 kg 4300 lb 1950 kg 4300 lbBreakout force, tilt cylinder 2302 kg 5074 lb 2283 kg 5034 lb 3336 kg 7355 lb

A Wheelbase 1105 mm 43.5" 1105 mm 43.5" 1249 mm 49.2"B Length without bucket 2767 mm 108.9" 2767 mm 108.9" 2993 mm 117.8"C Length with bucket on ground 3487 mm 137.3" 3487 mm 137.3" 3708 mm 146.0"D Height to top of cab 2082 mm 82.0" 2111 mm 83.1" 2110 mm 83.1"E Maximum overall height 3977 mm 156.6" 3917 mm 154.2" 4032 mm 158.7"F Bucket pin height at maximum lift 3122 mm 122.9" 3076 mm 121.1" 3154 mm 124.2"G Bucket pin height at carry position 190 mm 7.5" 200 mm 7.9" 200 mm 7.9"H Reach at maximum lift and dump 408 mm 16.0" 552 mm 21.7" 600 mm 23.6"J Clearance at maximum lift and dump 2359 mm 92.9" 2285 mm 90.0" 2465 mm 97.1"K Ground clearance 195 mm 7.7" 222 mm 8.7" 226 mm 8.9"L Departure angle 26° 27° 26°M Bumper overhang behind rear axle 1021 mm 40.2" 1021 mm 40.2" 1083 mm 42.6"N Maximum dump angle 48° 52° 39°O Vehicle width over tires 1676 mm 66.0" 1675 mm 66.0" 1676 mm 66"P Turning radius from center — machine rear 1639 mm 64.5" 1639 mm 64.5" 1806 mm 71.2"Q Turning radius from center — coupler 1314 mm 51.8" 1314 mm 51.8" 1401 mm 55.2"R Turning radius from center — bucket 2107 mm 83.0" 2107 mm 83.0" 2181 mm 85.9"S Maximum reach with arms parallel to ground 1353 mm 53.3" 1249 mm 49.2" 1388 mm 54.6"T Rack back angle at maximum height 91° 87° 96°

Bucket pin reach at maximum lift — 182 mm 7.2" —NOTE: Based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66") dirt bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical

suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).


15

Edition 44 15-33

Dimensions● 262D/272D/272D XHP

Skid Steer Loaders

MODEL 262D 272D 272D XHPOperating weight 3634 kg 8011 lb 3743 kg 8252 lb 4144 kg 9137 lbRated operating capacity 1225 kg 2700 lb 1451 kg 3200 lb 1678 kg 3700 lbTipping load 2449 kg 5400 lb 2903 kg 6400 lb 3357 kg 7400 lbBreakout force, tilt cylinder 3336 kg 7355 lb 3376 kg 7443 lb 3333 kg 7348 lb

A Wheelbase 1249 mm 49.2" 1386 mm 54.6" 1386 mm 54.6"B Length without bucket 2995 mm 117.9" 3156 mm 123.4" 3136 mm 123.5"C Length with bucket on ground 3714 mm 146.2" 3876 mm 152.6" 3855 mm 151.8"D Height to top of cab 2110 mm 83.1" 2111 mm 83.1" 2147 mm 84.5"E Maximum overall height 4008 mm 157.8" 4061 mm 159.9" 4098 mm 161.4"F Bucket pin height at maximum lift 3172 mm 124.9" 3227 mm 127.1" 3265 mm 128.6"G Bucket pin height at carry position 200 mm 7.9" 197 mm 7.8" 196 mm 7.7"H Reach at maximum lift and dump 786 mm 30.9" 799 mm 31.4" 761 mm 30.0"J Clearance at maximum lift and dump 2380 mm 93.7" 2431 mm 95.7" 2469 mm 97.2"K Ground clearance 226 mm 8.9" 220 mm 8.6" 257 mm 10.1"L Departure angle 26° 27° 28°M Bumper overhang behind rear axle 1083 mm 42.6" 1087 mm 42.8" 1087 mm 42.8"N Maximum dump angle 51° 52° 52°O Vehicle width over tires 1676 mm 66.0" 1829 mm 72.0" 1930 mm 76.0"P Turning radius from center — machine rear 1805 mm 71.1" 1873 mm 73.7" 1873 mm 73.7"Q Turning radius from center — coupler 1401 mm 55.2" 1483 mm 58.4" 1464 mm 57.6"R Turning radius from center — bucket 2181 mm 85.9" 2290 mm 90.2" 2307 mm 90.8"S Maximum reach with arms parallel to ground 1293 mm 50.9" 1298 mm 51.1" 1260 mm 49.6"T Rack back angle at maximum height 84° 83° 83°U Bucket pin reach at maximum lift 393 mm 15.5" 416 mm 16.4" 379 mm 14.9"

NOTE: Based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). 262D based on 1676 mm (66") dirt bucket and Cat 12 × 16.5 tires, 272D based on 1829 mm (72") dirt bucket and Cat 12 × 16.5 tires, and 272D XHP based on 1981 mm (78") dirt bucket and Cat 14 × 17.5 tires.


15-34 Edition 44

Work Tool Compatibility● 216B3/226B3/236D/242D/246D/262D/272D/272D XHP

CAT WORK TOOL COMPATIBILITY216B3 226B3 236D 242D 246D 262D 272D/272D XHP

General Purpose Buckets

1524 mm (60") O O A A A NR NR

1676 mm (66") A A O O O A A

1829 mm (72") NR NR O A O O O

1981 mm (78") NR NR A A A O O

High Capacity Bucket (GP)

2134 mm (84") NR NR A A A O O

Dirt Buckets

1524 mm (60") O O A A A NR NR

1676 mm (66") A A O O O A A

1829 mm (72") NR NR O A O O O

1981 mm (78") NR NR A A A O O

Utility Buckets

1524 mm (60") O O A A A NR NR

1676 mm (66") A A O O O A A

1829 mm (72") NR NR O A O O O

Light Material Buckets

1829 mm (72") O O O O O O O

1981 mm (78") NR NR A A A O O

2134 mm (84") NR NR A A A O O

2438 mm (96") NR NR NR NR A O O

Multi-Purpose Buckets

1524 mm (60") O O A A A NR NR

1676 mm (66") A A O O O A A

1829 mm (72") NR NR O A O O O

1981 mm (78") NR NR A NR A O O


Industrial Grapple Buckets

1524 mm (60") O O A A A NR NR

1676 mm (66") A A O O O A A

1829 mm (72") NR NR O A O O O


Industrial Grapple Forks

1676 mm (66") O O O O O O O

1829 mm (72") NR NR O A O O O

Industrial Grapple Rakes

1829 mm (72") O O O O O O O

2134 mm (84") NR NR A NR O O O

Utility Grapple Buckets

1524 mm (60") O O A A A NR NR

1676 mm (66") O O O O O A A

1829 mm (72") NR NR O A O O O O – Provides Optimum Performance. A – Provides Acceptable Performance. NR – Not Recommended.

Skid Steer Loaders


15

Edition 44 15-35


Skid Steer Loaders

CAT WORK TOOL COMPATIBILITY216B3 226B3 236D 242D 246D 262D 272D/272D XHP

Carriage O O O O O O O

Pallet Forks

910 mm (36") Tines O O O O O O O



Utility Grapple Forks

1676 mm (66") O O O O O O O

1829 mm (72") NR NR O A O O O

Utility Forks

1676 mm (66") O O O O O O O

1829 mm (72") NR NR O A O O O

Angle Blades

1829 mm (72") O O A O A A A

2134 mm (84") A A O A O O O

6 Way Blades

2000 mm (79") O O A O A A A

2337 mm (92") A A O O O O O

A14B Auger O O O O O O O

A19B Auger A A O A O O O

A26B Auger X A# X A# A# O# O#

Backhoe

BH150 O O O O X X X

BH160 X X X X O O O

BH27 O O O O X X X

BH30 O O O O X X X

BH30W X X X X O O O

BR160 Brushcutter O O X X X X X

BR166 Brushcutter O O O O O O O

BR172 Brushcutter O O O O O O O

BR272 Brushcutter X O# X X X X X

BR378 Brushcutter X X X X A# O# O#

BP15B Pickup Broom O! O O O O A A

BP18B Pickup Broom X X O O O O O

BA18 Angle Broom O O O O O O O

BU115 Utility Broom O! O O O O A A

BU118 Utility Broom X X O O O O O

O – Provides Optimum Performance. O# – The machine performance is optimum with the available HF/XPS option. A – Provides Acceptable Performance. A# – The machine performance is acceptable with the available HF/XPS option. NR – Not Recommended. X – Not Approved. Do Not Use. ! – Lift Restriction.


15-36 Edition 44


CAT WORK TOOL COMPATIBILITY216B3 226B3 236D 242D 246D 262D 272D 272D XHP

PC104B Cold Planer O O O O O O O O

PC205B Cold Planer A O# O O# O O O O

PC306B Cold Planer X A# X A# A O# O# O#

PC310B Cold Planer X X X X O# O# O# O#

PC408B Cold Planer X X X X X X X O#

PC412B Cold Planer X X X X X X X O#

H55D S Hammer O O O O O O O O

H65D S Hammer O O O O O O O O

LR15B Landscape Rake O! O! O! O! O O O O

LR18B Landscape Rake X X O! X O O O O

LT13B Landscape Tiller O O O O O O O O

LT18B Landscape Tiller X X O X O O O O

Material Handling Arm O O O O O O O O

HM315B Mulcher X X X X A# A# O# O#

HM415B Mulcher X X X X X X X O#

PR172 Power Box Rake O O A A A A A A

PR184 Power Box Rake A O O O O O O O

PR190 Power Box Rake A A O A O O O O

S305 Shear X X O# O# O# O# O# O#

SR117 Snowblower O O X X X X NR NR

SR118 Snowblower X X O X O O O O

SR121 Snowblower X X O X O O A A

SR318 Snowblower X O# X X O# O# O# O#

SR321 Snowblower X O# X X O# O# O# O#

SG16B Stump Grinder O O O O O O O O

SG18B Stump Grinder X A# X A# A# O# O# O#

T6B Trencher O O O O O O O O

T9B Trencher O O O O O O O O

T15B Trencher X A# X A# X O# O# O#

CV16B Vibratory Compactor O! O! O! O! O O O O

CV18B Vibratory Compactor X X X X O O O O

SW345B Wheel Saw — 80 mm (3") X X X A#! A#! O# O# O#

SW360B Wheel Saw — 80 mm (3") X X X X X X A#! A#!

SW360B Wheel Saw — 160 mm (6") X X X X X O# A#! A#!

SW360B Wheel Saw — 200 mm (8") X X X X X O# A#! A#!

SW460B Wheel Saw — 80 mm (3") X X X X X X X A#!



SW380B Wheel Saw — 250 mm (10") X X X X X X A#! A#!



Skid Steer Loaders


15

Edition 44 15-37

Multi Terrain LoadersSpecifications● 247B3

MODEL 247B3Flywheel Power: Net 42 kW 56 hp

Flywheel Power: Gross 46 kW 62 hp

Engine Model C2.2 T

Rated Engine RPM 3000

Bore 84 mm 3.3"

Stroke 100 mm 3.9"

Displacement 2.2 L 134 in3

No. Cylinders 4

One Speed Forward 0-11.3 km/h 0-7.0 mph

Two Speed Forward —

One Speed Reverse 0-12.2 km/h 0-7.6 mph

Two Speed Reverse —

Hydraulic Cycle Time, Empty Bucket: Seconds

Raise 2.7

Dump 2.1

Lower (Empty, Float Down) 2.7

Total 7.5

Tread Width (per side) 381 mm 15"

Width Over Tracks 1676 mm 5'6"

Ground Clearance 267 mm 10"

Fuel Tank Capacity 62 L 16.2 U.S. gal

Hydraulic Tank Capacity 35 L 9.2 U.S. gal

Hydraulic System Capacity (includes tank) 55 L 14.5 U.S. gal

Hydraulic Pump Capacity 61 L/min 16 gpm


15-38 Edition 44

Specifications● 257D/277D/287D

Multi Terrain Loaders








Bore 94 mm 3.7" 94 mm 3.7" 94 mm 3.7"

Stroke 120 mm 4.7" 120 mm 4.7" 120 mm 4.7"


No. Cylinders 4 4 4






Raise 4.4 3.1 4.6

Dump 2.4 2.5 2.3


Total 10.4 9.6 10.9

Tread Width 381 mm 15" 457 mm 18" 457 mm 18"







Loader Hydraulic Pressure, Standard 23 000 kPa 3335 psi 23 000 kPa 3335 psi 23 000 kPa 3335 psi

Hydraulic Pump Capacity, XPS 112 L/min 30 gpm 121 L/min 32 gpm 121 L/min 32 gpm

Loader Hydraulic Pressure, XPS 23 000 kPa 3335 psi 28 000 kPa 4061 psi 28 000 kPa 4061 psi



15

Edition 44 15-39

Performance Data● 247B3

Bucket Type General Purpose Multi-PurposeBucket Width 1680 mm (66") 1829 mm (72") 1680 mm (66")

Ground Engaging TypeHoles Only

Bolt-on Edge

Bolt-on Teeth

Holes Only

Bolt-on Edge

Bolt-on Teeth

Holes Only

Bolt-on Edge



yd3 0.38 0.38 0.38 0.42 0.42 0.42 0.31 0.31Width mm 1730 1740 1730 1883 1893 1883 1749 1749


in 84 82.7 81.4 84 82.7 81.4 84 82.8Reach at maximum lift/dump mm 625 637 696 625 637 696 628 640

in 24.6 25.1 27.4 24.6 25.1 27.4 24.7 25.2Floor angle at maximum lift/dump degrees 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8°Floor angle at maximum lift/rack back degrees 95.7° 95.7° 95.7° 95.7° 95.7° 95.7° 95.6° 95.6°Clearance at maximum lift/level bucket mm 2667 2651 2666 2667 2651 2666 2673 2653

in 105 104.4 105 105 104.4 105 105.2 104.4Hinge pin height at maximum lift mm 2862 2862 2862 2862 2862 2862 2862 2862

in 112.7 112.7 112.7 112.7 112.7 112.7 112.7 112.7Maximum overall height mm 3770 3799 3867 3770 3799 3867 3774 3804

in 148.4 149.6 152.2 148.4 149.6 152.2 148.6 149.8Reach at level lift arm/bucket mm 1395 1423 1493 1395 1423 1493 1399 1427

in 54.9 56 58.8 54.9 56 58.8 55.1 56.2Maximum floor angle at minimum lift degrees 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.3° 25.3°Dig depth with level bucket mm 0 16 1 0 16 1 0 16

in 0 0.6 0 0 0.6 0 0 0.6Overall length with bucket on ground mm 3285 3313 3382 3285 3313 3382 3289 3317

in 129.3 130.4 133.1 129.3 130.4 133.1 129.5 130.6Front clearance circle radius

(with bucket)mm 2157 2189 2223 2189 2221 2251 2142 2174

in 84.9 86.2 87.5 86.2 87.4 88.6 84.3 85.6Tipping load kg 1811 1752 1715 1803 1740 1780 1663 1607

lb 3992 3863 1788 3975 3837 3925 3666 3542Breakout force — lift kg 1408 1359 1392 1402 1350 1386 1298 1250

lb 3105 2996 3070 3091 2977 3056 2862 2755Breakout force — tilt kg 1694 1590 1676 1689 1583 1673 1618 1517

lb 3734 3505 3696 3724 3491 3688 3567 1145Operating weight kg 3169 3202 3185 3177 3212 3193 3302 3334

lb 6987 7060 7023 7004 7082 7040 7280 7352



15-40 Edition 44



Bucket Type Multi-Purpose DirtBucket Width 1680 mm 1829 mm 1680 mm 1829 mm

(66") (72") (66") (72")

Ground Engaging TypeBolt-on Teeth

Holes Only

Bolt-on Edge

Bolt-on Teeth

Holes Only

Bolt-on Edge

Holes Only

Bolt-on Edge



yd3 0.31 0.35 0.36 0.35 0.35 0.35 0.38 0.41Width mm 1749 1902 1902 1902 1730 1740 1883 1893


in 81.3 84 82.8 81.3 85.3 84.2 85.3 84.2Reach at maximum lift/dump mm 702 628 640 702 584 596 584 596

in 27.6 24.7 25.2 27.6 23 23.5 23 23.5Floor angle at maximum lift/dump degrees 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8°Floor angle at maximum lift/rack back degrees 95.6° 95.6° 95.6° 95.7° 95.7° 95.7° 95.7° 95.7°Clearance at maximum lift/level bucket mm 2668 2673 2653 2668 2667 2651 2667 2651

in 105 105.2 104.4 105 105 104.4 105 104.4Hinge pin height at maximum lift mm 2862 2862 2862 2862 2862 2862 2862 2862

in 112.7 112.7 112.7 112.7 112.7 112.7 112.7 112.7Maximum overall height mm 3872 3774 3804 3872 3717 3746 3717 3746

in 152.4 148.6 149.8 152.4 146.3 147.5 146.3 147.5Reach at level lift arm/bucket mm 1497 1399 1427 1497 1342 1370 1342 1370

in 58.9 55.1 56.2 58.9 52.8 53.9 52.8 53.9Maximum floor angle at minimum lift degrees 25.3° 25.3° 25.3° 25.3° 25.4° 25.4° 25.4° 25.4°Dig depth with level bucket mm 1 0 16 1 0 13 0 13

in 0 0 0.6 0 0 0.5 0 0.5Overall length with bucket on ground mm 3386 3289 3317 3386 3232 3260 3233 3261

in 133.3 129.5 130.6 133.3 127.2 128.3 127.3 128.4Front clearance circle radius

(with bucket)mm 2208 2152 2183 2213 2097 2128 2110 2141

in 86.9 84.7 85.9 87.1 82.6 83.8 83.1 84.3Tipping load kg 1643 1645 1586 1625 1913 1849 1906 1838

lb 3623 3628 3497 3584 4219 4077 4203 4052Breakout force — lift kg 1282 1283 1233 1267 1478 1428 1472 1419

lb 2826 2829 2718 2794 3260 3148 3246 3128Breakout force — tilt kg 1600 1609 1508 1594 1842 1726 1838 1720

lb 3528 3548 3326 3574 4061 3806 4052 3792Operating weight kg 3318 3320 3356 3337 3119 3151 3126 3162

lb 7316 7321 7400 7357 6876 6949 6893 6972


15

Edition 44 15-41


Work Tool Pallet ForkTine Length 910 mm (36") 1070 mm (42") 1220 mm (48")Carriage Assembly No. 353-1694 353-1696 353-1697Carriage overall width without step mm 1159 1159 1159


in 4.3 4.3 4.3Carriage height above blade top mm 923.5 923.5 923.5








in 142 148 154Tipping load kg 1542 1436 1349

lb 3400 3167 2975Operating weight kg 3134 3145 3154

lb 6911 6934 6955



15-42 Edition 44



Bucket Type General Purpose: Bolt-on Edge Multi-Purpose: Bolt-on EdgeBucket Width 1680 mm (66") 1830 mm (72") 1680 mm (66") 1830 mm (72")Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5369 279-5373 279-5391 279-5399Rated bucket capacity m3 0.40 0.44 0.34 0.37


yd3 0.38 0.41 0.33 0.34Width mm 1740 1893 1749 1902










(with bucket)mm 2257 2288 2260 2291





lb 8142 8176 8436 8486


15

Edition 44 15-43


Bucket Type Dirt: Bolt-on EdgeBucket Width 1680 mm (66") 1830 mm (72")Ground Engaging Type Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5441 285-6090Rated bucket capacity m3 0.37 0.41

yd3 0.48 0.54Struck capacity m3 0.27 0.30

yd3 0.35 0.39Width mm 1740 1893

in 68.5 74.5Dump clearance at maximum lift/dump mm 2235 2234

in 88.0 88.0Reach at maximum lift/dump mm 679 681

in 26.7 26.8Floor angle at maximum lift/dump degrees –53.3 –53.4Floor angle at maximum lift/rack back degrees 85.9 85.9Clearance at maximum lift/level bucket mm 2857 2856

in 112.5 112.5Hinge pin height at maximum lift mm 3065 3064

in 120.7 120.6Maximum overall height mm 3928 3927

in 154.7 154.6Reach at level lift arm/bucket mm 1387 1388

in 54.6 54.6Maximum floor angle at minimum lift degrees 23.8 23.8Dig depth with level bucket mm –17 –17

in –0.7 –0.7Overall length with bucket on ground mm 3502 3502

in 137.9 137.9Front clearance circle radius

(with bucket)mm 2211 2242

in 87.0 88.3Tipping load kg 2449.3 2433.4

lb 5400 5365Breakout force — lift kg 2048.5 2034.6

lb 4516 4485Breakout force — tilt kg 2182.4 2172.7

lb 4811 4790Operating weight kg 3670.3 3686.4

lb 8092 8127



15-44 Edition 44















lb 7968 7991 8012


15

Edition 44 15-45


Bucket Type General Purpose: Bolt-on EdgeBucket Width 1981 mm (78") 2134 mm (84")Tire Size 12 × 16.5 12 × 16.5Ground Engaging Type Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5377 296-8192Rated bucket capacity m3 0.48 0.63


yd3 0.42 0.77Width mm 2045 2198















lb 9408 9489



15-46 Edition 44



Bucket Type Multi-Purpose: Bolt-on Edge Dirt: Bolt-on EdgeBucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")Tire Size 12 × 16.5 12 × 16.5 12 × 16.5Bucket Assembly No. Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5402 296-8057 268-4083Rated bucket capacity m3 0.40 0.43 0.44


yd3 0.37 0.39 0.42Width mm 2045 2207 2045















lb 9730 9783 9366


15


Edition 44 15-47













lb 9169 9191 9213



15-48 Edition 44





yd3 0.42 0.77Width mm 2045 2198















lb 10,021 10,103


15

Edition 44 15-49




yd3 0.37 0.39 0.42Width mm 2045 2207 2045















lb 10,344 10,397 9979



15-50 Edition 44















lb 9783 9805 9826


15

Edition 44 15-51

Dimensions● 247B3

MODEL 247B3Rated operating capacity* 975 kg 2150 lb

A Height to top of ROPS 1990 mm 78"

B Length to coupler 2518 mm 99"

C Length with bucket on ground 3285 mm 129"

D Maximum overall height 3799 mm 150"

E Ground clearance 267 mm 10"

F Departure angle 41°

G Wheelbase 1499 mm 4'11"

H Hinge pin height at carry position 220 mm 8.7"

Bucket overall width with edge 1730 mm 6'6"

J Clearance at maximum lift/dump 2134 mm 84"

K Floor angle at maximum lift/dump 40°

L Floor angle at maximum lift/rack 82°

M Clearance at maximum lift/level 2667 mm 8'8"

N Hinge pin height at maximum lift 2862 mm 112"

O Reach at level lift arm/bucket 1339 mm 4'7"

Bumper overhang from axle 576 mm 1'10"

Maximum floor angle at carry position 28°

*SAE J818 MAY87, ISO 5998:1986.NOTE: 247B3/257B3 machine dimensions shown with standard machine equipped with 1676 mm (66") dirt bucket.



15-52 Edition 44



MODEL 257D 277D 287DOperating weight 3651 kg 8048 lb 4215 kg 9293 lb 4504 kg 9929 lbRated operating capacity at 35% 889 kg 1960 lb 1045 kg 2303 lb 1270 kg 2800 lbRated operating capacity at 50% 1270 kg 2800 lb 1492 kg 3290 lb 1814 kg 4000 lbTipping load 2540 kg 5600 lb 2985 kg 6580 lb 3629 kg 8000 lbBreakout force, tilt cylinder 2284 kg 5035 lb 3304 kg 7285 lb 3307 kg 7291 lbGround pressure 31.3 kPa 4.5 psi 25.0 kPa 3.6 psi 26.7 kPa 3.9 psi

A Length of track on ground 1499 mm 59.0" 1807 mm 71.1" 1807 mm 71.1"B Overall length of track 1898 mm 74.7" 2285 mm 90.0" 2285 mm 90.0"C Length without bucket 2767 mm 108.9" 2995 mm 117.9" 2995 mm 117.9"D Length with bucket on ground 3486 mm 137.3" 3714 mm 146.2" 3714 mm 146.2"E Height to top of cab 2129 mm 83.8" 2113 mm 83.2" 2113 mm 83.2"F Maximum overall height 3932 mm 154.8" 4052 mm 159.5" 4015 mm 158.1"G Bucket pin height at maximum lift 3091 mm 121.7" 3174 mm 125.0" 3178 mm 125.1"H Bucket pin height at carry position 215 mm 8.5" 202 mm 8.0" 190 mm 7.5"J Reach at maximum lift and dump 637 mm 25.1" 598 mm 23.5" 783 mm 30.8"K Clearance at maximum lift and dump 2300 mm 90.5" 2488 mm 97.9" 2387 mm 94.0"L Ground clearance 242 mm 9.5" 226 mm 8.9" 226 mm 8.9"M Departure angle 35° 38° 38°N Maximum dump angle 52° 39° 51°O Vehicle width 1676 mm 66.0" 1981 mm 78.0" 1981 mm 78.0"P Turning radius from center — machine rear 1555 mm 61.2" 1713 mm 67.4" 1713 mm 67.4"Q Turning radius from center — coupler 1399 mm 55.1" 1493 mm 58.8" 1493 mm 58.8"R Turning radius from center — bucket 2191 mm 86.3" 2336 mm 92.0" 2336 mm 92.0"S Maximum reach with arms parallel to ground 1334 mm 52.5" 1395 mm 54.9" 1292 mm 50.9"T Rack back angle at maximum height 86° 94° 84°U Bucket pin reach at maximum lift 367 mm 14.5" — 391 mm 15.4"

NOTE: Based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78") dirt bucket, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). 257D based on 1676 mm (66") dirt bucket and one speed.


15

Edition 44 15-53

Work Tool Compatibility● 247B3/257D/277D/287D

CAT WORK TOOL COMPATIBILITY247B3 257D 277D 287D


1524 mm (60") A A NR NR

1676 mm (66") O O NR NR

1829 mm (72") O O A A

1981 mm (78") A A O O


2134 mm (84") NR NR O O

Dirt Buckets

1524 mm (60") A A NR NR

1676 mm (66") O O NR NR

1829 mm (72") O O A A

1981 mm (78") O O O O

Utility Buckets

1524 mm (60") A A NR NR

1676 mm (66") O O NR NR

1829 mm (72") O O A A


1829 mm (72") O O A A

1981 mm (78") A A O O

2134 mm (84") A A O O

2438 mm (96") A O O O


1524 mm (60") A A NR NR

1676 mm (66") O O NR NR

1829 mm (72") O O A A

1981 mm (78") A A O O

2134 mm (84") NR NR O O


1524 mm (60") A A NR NR

1676 mm (66") O O NR NR

1829 mm (72") O O A A

1981 mm (78") A A O O


1676 mm (66") O O A A

1829 mm (72") O O O O


1829 mm (72") O O O O

2134 mm (84") O O O O


1524 mm (60") A A NR NR

1676 mm (66") O O NR NR

1829 mm (72") O O A A O – Provides Optimum Performance. A – Provides Acceptable Performance. NR – Not Recommended.



15-54 Edition 44



Carriage O O O O

Pallet Forks

910 mm (36") Tines O O O O




1676 mm (66") O O A A

1829 mm (72") O O O O

Utility Forks

1676 mm (66") O O A A

1829 mm (72") O O O O

Angle Blades

1829 mm (72") A A NR NR

2134 mm (84") O O O O

6 Way Blades

2000 mm (79") O O O O

2337 mm (92") A A O O

A14B Auger O O O O

A19B Auger O O O O

A26B Auger X X O# O#

Backhoe

BH150 O O X X

BH160 X X O O

BH27 O O X X

BH30 O O X X

BH30W X X O O

BR160 Brushcutter O X X X

BR166 Brushcutter O O O O


BR272 Brushcutter X X X X

BR378 Brushcutter X X O# O#

BP15B Pickup Broom O! O A A

BP18B Pickup Broom X O! O O

BA18 Angle Broom O O O O

BU115 Utility Broom O! O A A

BU118 Utility Broom X O! O O

O – Provides Optimum Performance. O# – The machine performance is optimum with the available HF/XPS option. A – Provides Acceptable Performance. NR – Not Recommended. X – Not Approved. Do Not Use. ! – Lift Restriction.



15

Edition 44 15-55



PC104B Cold Planer O O O O

PC205B Cold Planer O# O# O# O#

PC306B Cold Planer X O# O# O#

PC310B Cold Planer X O# O# O#

PC408B Cold Planer X X X X

PC412B Cold Planer X X X X

H55D S Hammer O O O O

H65D S Hammer O O O O

LR15B Landscape Rake O! O! NR NR

LR18B Landscape Rake O! O! O O

LT13B Landscape Tiller O! O! NR NR

LT18B Landscape Tiller O O! O O

Material Handling Arm O O O O

HM315B Mulcher X X O# O#

HM415B Mulcher X X X X

PR172 Power Box Rake O O A A

PR184 Power Box Rake O O O O

PR190 Power Box Rake A A O O

S305 Shear O# O# O# O#

SR117 Snowblower O X X X

SR118 Snowblower X O O O

SR121 Snowblower X O O O

SR318 Snowblower X O# O# O#

SR321 Snowblower X O# O# O#

SG16B Stump Grinder O O O O

SG18B Stump Grinder X X O# O#

T6B Trencher O O O O

T9B Trencher A O O O

T15B Trencher X X O# O#

CV16B Vibratory Compactor O! O! O O

CV18B Vibratory Compactor X X O O

SW345B Wheel Saw — 80 mm (3") X A#! O# O#

SW360B Wheel Saw — 80 mm (3") X X A#! A#!



SW460B Wheel Saw — 80 mm (3") X X X X








15-56 Edition 44

Compact Track Loaders Specifications● 259D/279D/289D








Bore 94 mm 3.7" 94 mm 3.7" 94 mm 3.7"

Stroke 120 mm 4.7" 120 mm 4.7" 120 mm 4.7"


No. Cylinders 4 4 4






Raise 4.4 3.1 4.6

Dump 2.4 2.5 2.3


Total 10.4 9.6 10.9

Tread Width (per side) 320 mm 12.6" 400 mm 15.7" 400 mm 15.7"

400 mm 15.7" 450 mm 17.7" 450 mm 17.7"


1755 mm 69" 1981 mm 78" 1981 mm 78"







Hydraulic Pump Capacity, High Flow/XPS 112 L/min 30 gpm 121 L/min 32 gpm 121 L/min 32 gpm

Hydraulic Pressure, High Flow/XPS 23 000 kPa 3335 psi 28 000 kPa 4061 psi 28 000 kPa 4061 psi


PHB-Sec15-14.indd 56PHB-Sec15-14.indd 56 1/2/14 2:27 PM1/2/14 2:27 PM

Edition 44 15-57

15

Specifications● 299D/299D XHP

Compact Track Loaders

MODEL 299D 299D XHPFlywheel Power:

Net (SAE 1349) 71 kW 95 hp 79 kW 106 hp

Gross (SAE J1995) 73 kW 98 hp 82 kW 110 hp

Engine Model C3.8 DIT C3.8 DIT

Rated Engine RPM 2400 2400

Bore 100 mm 3.9" 100 mm 3.9"

Stroke 120 mm 4.7" 120 mm 4.7"

Displacement 3.8 L 232 in3 3.8 L 232 in3

No. Cylinders 4 4

One Speed Forward 0-8.4 km/h 0-5.2 mph 0-8.4 km/h 0-5.2 mph

Two Speed Forward 0-13.5 km/h 0-8.4 mph 0-13.5 km/h 0-8.4 mph

One Speed Reverse 0-8.4 km/h 0-5.2 mph 0-8.4 km/h 0-5.2 mph

Two Speed Reverse 0-13.5 km/h 0-8.4 mph 0-13.5 km/h 0-8.4 mph

Hydraulic Cycle Time, Empty Bucket: Seconds Seconds

Raise 5.2 4.4

Dump 2.3 2.1

Lower (Empty, Float Down) 4.6 4.7

Total 12.1 11.2

Tread Width (per side) 400 mm 15.7" 400 mm 15.7"

Width Over Tracks 1931 mm 76" 1931 mm 76"

Ground Clearance 222 mm 8.7" 222 mm 8.7"

Fuel Tank Capacity 122 L 32.2 U.S. gal 122 L 32.2 U.S. gal

Hydraulic Tank Capacity 39 L 10.3 U.S. gal 39 L 10.3 U.S. gal

Hydraulic System Capacity (includes tank) 55 L 14.5 U.S. gal 55 L 14.5 U.S. gal

Hydraulic Pump Capacity:

Standard 86 L/min 23 gpm 86 L/min 23 gpm

High Flow/XPS 121 L/min 32 gpm —

XHP — 150 L/min 40 gpm

Hydraulic Pressure:

Standard 23 000 kPa 3335 psi 23 000 kPa 3335 psi

High Flow/XPS 28 000 kPa 4061 psi —

XHP — 28 000 kPa 4061 psi


15-58 Edition 44



Bucket Type General Purpose: Bolt-on Edge Multi-Purpose: Bolt-on EdgeBucket Width 1680 mm (66") 1830 mm (72") 1680 mm (66") 1830 mm (72")Ground Engaging Type Bolt-on Edge Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5369 279-5373 279-5391 279-5399Rated bucket capacity m3 0.40 0.44 0.34 0.37


yd3 0.38 0.41 0.33 0.34Width mm 1740 1893 1749 1902










(with bucket)mm 2251 2281 2253 2284





lb 9342 9376 9636 9686


15

Edition 44 15-59

Bucket Type Dirt: Bolt-on EdgeBucket Width 1680 mm (66") 1830 mm (72")Ground Engaging Type Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5441 285-6090Rated bucket capacity m3 0.37 0.41


yd3 0.35 0.39Width mm 1740 1893















lb 9292 9327

Compact Track LoadersPerformance Data● 259D


15-60 Edition 44













lb 8726 8749 8770




15

Edition 44 15-61



yd3 0.42 0.77Width mm 2045 2198















lb 10,015 10,096




15-62 Edition 44



yd3 0.37 0.39 0.42Width mm 2045 2207 2045







in 57.5 57.6 54.8Maximum floor angle at minimum lift degrees 26.2 26.2 26.2Dig depth with level bucket mm –12 –13 1

in –0.5 –0.5 0.0Overall length with bucket on ground mm 3785 3785 3726







lb 10,337 10,390 9972




15

Edition 44 15-63

Compact Track LoadersPerformance Data● 279D













lb 9776 9798 9819


15-64 Edition 44




yd3 0.42 0.77Width mm 2045 2198















lb 10,628 10,710



15

Edition 44 15-65




yd3 0.37 0.39 0.42Width mm 2045 2207 2045















lb 10,951 11,004 10,586



15-66 Edition 44














lb 10,389 10,412 10,433



15

Edition 44 15-67


Bucket Type General Purpose: Bolt-on EdgeBucket Width 1981 mm (78") 2134 mm (84")Ground Engaging Type Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5377 296-8192Rated bucket capacity m3 0.48 0.63


yd3 0.42 0.77Width mm 2045 2198



in 31.9 34.3Floor angle at maximum lift/dump degrees 51.8 51.9Floor angle at maximum lift/rack back degrees –83.2 –83.1Clearance at maximum lift/level bucket mm 2981 2977












lb 10,846 10,928



15-68 Edition 44


Bucket Type Multi-Purpose: Bolt-on Edge Dirt: Bolt-on EdgeBucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")Bucket Assembly No. Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5402 296-8057 268-4083Rated bucket capacity m3 0.40 0.43 0.44


yd3 0.37 0.39 0.42Width mm 2045 2207 2045



in 32.4 32.5 30.7Floor angle at maximum lift/dump degrees 52.1 52.1 51.7Floor angle at maximum lift/rack back degrees –82.9 –82.8 –83.2Clearance at maximum lift/level bucket mm 2970 2968 2984












lb 11,169 11,222 10,804



15

Edition 44 15-69














lb 10,607 10,630 10,651



15-70 Edition 44


Bucket Type General Purpose: Bolt-on EdgeBucket Width 1981 mm (78") 2134 mm (84")Ground Engaging Type Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5377 296-8192Rated bucket capacity m3 0.48 0.63


yd3 0.42 0.77Width mm 2045 2198



in 31.7 34.0Floor angle at maximum lift/dump degrees 51.6 51.7Floor angle at maximum lift/rack back degrees –83.4 –83.3Clearance at maximum lift/level bucket mm 2985 2982












lb 11,722 11,803



Edition 44 15-71

15

Bucket Type Multi-Purpose: Bolt-on Edge Dirt: Bolt-on EdgeBucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")Bucket Assembly No. Bolt-on Edge Bolt-on Edge Bolt-on EdgeBucket Assembly No. 279-5402 296-8057 268-4083Rated bucket capacity m3 0.40 0.43 0.44


yd3 0.37 0.39 0.42Width mm 2045 2207 2045



in 32.2 32.2 30.4Floor angle at maximum lift/dump degrees 51.9 51.9 51.6Floor angle at maximum lift/rack back degrees –83.1 –83.0 –83.4Clearance at maximum lift/level bucket mm 2975 2973 2989












lb 12,045 12,097 11,680




15-72 Edition 44













lb 11,483 11,506 11,527




15

Edition 44 15-73



MODEL 259D 279D 289DOperating weight 4013 kg 8846 lb 4487 kg 9893 lb 4778 kg 10,533 lbRated operating capacity at 35% 921 kg 2030 lb 932 kg 2055 lb 1207 kg 2660 lbRated operating capacity at 50% 1315 kg 2900 lb 1331 kg 2935 lb 1724 kg 3800 lbTipping load 2631 kg 5800 lb 2663 kg 5870 lb 3447 kg 7600 lbBreakout force, tilt cylinder 2284 kg 5035 lb 3304 kg 7285 lb 3307 kg 7291 lbGround pressure 41.1 kPa 6.0 psi 33.9 kPa 4.9 psi 36.1 kPa 5.2 psi

A Length of track on ground 1499 mm 59.0" 1630 mm 64.2" 1630 mm 64.2"B Overall length of track 1999 mm 78.7" 2129 mm 83.8" 2129 mm 83.8"C Length without bucket 2767 mm 108.9" 2995 mm 117.9" 2995 mm 117.9"D Length with bucket on ground 3486 mm 137.3" 3714 mm 146.2" 3714 mm 146.2"E Height to top of cab 2111 mm 83.1" 2113 mm 83.2" 2113 mm 83.2"F Maximum overall height 3915 mm 154.1" 4051 mm 159.5" 4015 mm 158.1"G Bucket pin height at maximum lift 3075 mm 121.0" 3173 mm 124.9" 3178 mm 125.1"H Bucket pin height at carry position 198 mm 7.8" 198 mm 7.8" 190 mm 7.5"J Reach at maximum lift and dump 608 mm 23.9" 575 mm 22.6" 761 mm 30.0"K Clearance at maximum lift and dump 2283 mm 89.9" 2485 mm 97.8" 2387 mm 94.0"L Ground clearance 226 mm 8.9" 226 mm 8.9" 226 mm 8.9"M Departure angle 35° 32° 33°N Maximum dump angle 52° 39° 51°O Vehicle width 1676 mm 66.0" 1931 mm 76.0" 1931 mm 76.0"P Turning radius from center — machine rear 1561 mm 61.5" 1796 mm 70.7" 1796 mm 70.7"Q Turning radius from center — coupler 1392 mm 54.8" 1410 mm 55.5" 1410 mm 55.5"R Turning radius from center — bucket 2184 mm 86.0" 2256 mm 88.8" 2256 mm 88.8"S Maximum reach with arms parallel to ground 1305 mm 51.4" 1373 mm 54.0" 1270 mm 50.0"T Rack back angle at maximum height 87° 83° 84°U Bucket pin reach at maximum lift 238 mm 9.4" — 369 mm 14.5"

NOTE: Based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). 259D based on 1676 mm (66") dirt bucket and 320 mm (12.6") track. 279D and 289D based on 400 mm (15.7") track and 1981 mm (78") dirt bucket.


15-74 Edition 44

Dimensions● 299D/299D XHP


MODEL 299D 299D XHPOperating weight 4862 kg 10,718 lb 5267 kg 11,612 lbRated operating capacity at 35% 1350 kg 2975 lb 1476 kg 3255 lbRated operating capacity at 50% 1928 kg 4250 lb 2109 kg 4650 lbTipping load 3855 kg 8500 lb 4218 kg 9300 lbBreakout force, tilt cylinder 3426 kg 7552 lb 3426 kg 7552 lbGround pressure 33.8 kPa 4.9 psi 36.7 kPa 5.3 psi

A Length of track on ground 1767 mm 69.9" 1767 mm 69.9"B Overall length of track 2270 mm 89.4" 2270 mm 89.4"C Length without bucket 3136 mm 123.5" 3136 mm 123.5"D Length with bucket on ground 3855 mm 151.8" 3855 mm 151.8"E Height to top of cab 2127 mm 83.7" 2127 mm 83.7"F Maximum overall height 4024 mm 158.4" 4024 mm 158.4"G Bucket pin height at maximum lift 3191 mm 125.6" 3191 mm 125.6"H Bucket pin height at carry position 200 mm 7.9" 200 mm 7.9"J Reach at maximum lift and dump 778 mm 30.6" 778 mm 30.6"K Clearance at maximum lift and dump 2395 mm 94.3" 2395 mm 94.3"L Ground clearance 222 mm 8.7" 222 mm 8.7"M Departure angle 30° 30°N Maximum dump angle 52° 52°O Vehicle width 1931 mm 76.0" 1931 mm 76.0"P Turning radius from center — machine rear 1863 mm 73.4" 1863 mm 73.4"Q Turning radius from center — coupler 1474 mm 58.0" 1474 mm 58.0"R Turning radius from center — bucket 2317 mm 91.2" 2317 mm 91.2"S Maximum reach with arms parallel to ground 1276 mm 50.2" 1276 mm 50.2"T Rack back angle at maximum height 83° 83°U Bucket pin reach at maximum lift 396 mm 15.6" 396 mm 15.6"

NOTE: Based on 75 kg (165 lb) operator, all fluids, two speed, 1981 mm (78") dirt bucket, 400 mm (15.7") tracks, and manual quick coupler (unless otherwise noted). 299D based on dual flange front idler/single flange rear idler, OROPS, standard flow hydraulics, mechanical suspension seat, and no optional counterweights. 299D XHP based on triple flange front/rear idlers, ride control, enclosed cab with glass door, side windows, air conditioning, and air ride seat.


15

Edition 44 15-75

Work Tool Compatibility● 259D/279D/289D/299D/299D XHP

CAT WORK TOOL COMPATIBILITY259D 279D 289D 299D/299D XHP


1524 mm (60") A NR NR NR

1676 mm (66") O NR NR NR

1829 mm (72") O A A A

1981 mm (78") A O O O


2134 mm (84") NR O O O

Dirt Buckets

1524 mm (60") A NR NR NR

1676 mm (66") O NR NR NR

1829 mm (72") O A A A

1981 mm (78") O O O O

Utility Buckets

1524 mm (60") A NR NR NR

1676 mm (66") O NR NR NR

1829 mm (72") A A A A


1829 mm (72") O A A A

1981 mm (78") A O O O

2134 mm (84") A O O O

2438 mm (96") A O O O


1524 mm (60") A NR NR NR

1676 mm (66") O NR NR NR

1829 mm (72") O A A A

1981 mm (78") A O O O

2134 mm (84") NR O O O


1524 mm (60") A NR NR NR

1676 mm (66") O NR NR NR

1829 mm (72") O A A A

1981 mm (78") A O O O


1676 mm (66") O A A A

1829 mm (72") O O O O


1829 mm (72") O O O O

2134 mm (84") O O O O


1524 mm (60") — NR NR NR

1676 mm (66") O NR NR NR

1829 mm (72") O A A A O – Provides Optimum Performance. A – Provides Acceptable Performance. NR – Not Recommended.



15-76 Edition 44


CAT WORK TOOL COMPATIBILITY259D 279D 289D 299D/299D XHP

Carriage O O O O

Pallet Forks





1676 mm (66") O A A A

1829 mm (72") O O O O

Utility Forks

1676 mm (66") O A A A

1829 mm (72") O O O O

Angle Blades

1829 mm (72") A NR NR NR

2134 mm (84") O O O O

6 Way Blades

2000 mm (79") O O O O

2337 mm (92") A O O O

A14B Auger O O O O

A19B Auger O O O O

A26B Auger X O# O# O#

Backhoe

BH150 O X X X

BH160 X O O O

BH27 O X X X

BH30 O X X X

BH30W X O O O





BR378 Brushcutter O# O# O# O#

BP15B Pickup Broom O A A A

BP18B Pickup Broom O! O O O

BA18 Angle Broom O O O O

BU115 Utility Broom O! A A A

BU118 Utility Broom X O O O

O – Provides Optimum Performance. O# – The machine performance is optimum with the available HF/XPS option. A – Provides Acceptable Performance. NR – Not Recommended. X – Not Approved. Do Not Use. ! – Lift Restriction.



15

Edition 44 15-77


CAT WORK TOOL COMPATIBILITY259D 279D 289D 299D 299D XHP

PC104B Cold Planer O O O O O

PC205B Cold Planer O# O# O# O# O#



PC408B Cold Planer X X X X O#

PC412B Cold Planer X X X X O#

H55D S Hammer O O O O O

H65D S Hammer O O O O O

LR15B Landscape Rake O! NR NR NR NR

LR18B Landscape Rake O! O O O O

LT13B Landscape Tiller O! NR NR NR NR

LT18B Landscape Tiller O! O O O O

Material Handling Arm O O O O O

HM315B Mulcher X O# O# O# O#

HM415B Mulcher X X X X O#

PR172 Power Box Rake O A A A A

PR184 Power Box Rake O O O O O

PR190 Power Box Rake A O O O O

S305 Shear O# O# O# O# O#

SR117 Snowblower X X X NR NR

SR118 Snowblower O O O A A

SR121 Snowblower O O O O O

SR318 Snowblower O# O# O# O# O#

SR321 Snowblower O# O# O# O# O#

SG16B Stump Grinder O O O O O

SG18B Stump Grinder X O# O# O# O#

T6B Trencher O O O O O

T9B Trencher O O O O O

T15B Trencher X O# O# O# O#

CV16B Vibratory Compactor O! O O O O

CV18B Vibratory Compactor X O O O O

SW345B Wheel Saw — 80 mm (3") A#! O# O# O# O#

SW360B Wheel Saw — 80 mm (3") X A#! A#! O# O#



SW460B Wheel Saw — 80 mm (3") X X X X O#








Skid Steer LoadersMulti Terrain Loaders


Work Tools● Augers

Features:● Cat XT™-3 hose and O-ring face seals are used through-

out for superior leak-free performance.● Both standard and tree bits are available in a variety

of sizes for a wide range of projects.● Standard bit teeth and pilot points are produced from

hardened steel. Optional hardfaced and carbide inserted teeth are also available.

● Optional bit extension is available in 305 mm (12") length.● Hex-to-round shaft adapter is available to accom mo-

date existing round auger bit mountings.● A14B and A19B are compatible with both mini hydrau-

lic excavators and skid steer loaders.

A14B Auger● Direct drive system features a variable speed, bidirec-

tional, “Gerotor” style hydraulic motor that generates optimal speed and output torque for light to moderate duty work.

A19B Auger● Single reduction planetary drive system trans fers power

from the drive motor to the drive shaft, reducing motor speed and increasing torque.

● Drive motor shaft is splined and couples directly to the planetary gearbox.

A26B Auger● Double reduction planetary drive system trans fers power

from the drive motor to the drive shaft, reducing motor speed and increasing torque.

● Drive motor shaft is splined and couples directly to the planetary gearbox.

Market Opportunities● Agriculture — Augers are an effective work tool around

the farm to drill holes for fence posts, pole barn sup-ports and footers for outbuildings.

● Building/General Construction — Augers are an essen-tial work tool on many construction sites to drill holes for deck posts and footings, signs and fencing.

● Landscaping/Landscape Maintenance — Augers with spe-cial tree bits are ideal for preparing holes for tree plant-ing. They are also ideal for school, park, golf course and recreational maintenance departments to drill holes for playground supports, trees and shrubs, fence posts, and signs.

● Governmental/Municipalities — Augers with multiple bit sizes are popular work tools to do a wide spectrum of jobs, including digging holes for traffic signs, poles, posts and trees.

● Rental — Augers are one of the highest opportunity rental work tool after buckets.

● Specialty Trades/Utility — Augers are ideal for elec-trical, fencing and plumbing contractors when install-ing lighting, fence posts and gas/water mains.

Augers are typically not a full time work tool, how ever they are a highly utilized option for specialized applica-tions. They are often used in conjunction with a bucket, set of pallet forks and/or a trencher.

Auger BitsAuger bits are available in both standard and tree bit

configurations with standard hardened, revers ible teeth and cast/hardened pilot point. Optional hardfaced and carbide inserted teeth and pilot points are available for aggressive boring conditions. Stan dard bits are available diameters ranging from 6"–36"; tree bits are available in 24" and 36" diameters. Typical digging depth is 48", however for deeper holes, optional 12" and 24" exten-sions are available. A special HEX to round adapter is also available for customers who use existing round shaft auger bits.

Machine CompatibilityAuger Model Machine Models

A14B 226B3, 236D, 242D, 246D, 247B3, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

A19B 226B3, 236D, 242D, 246D, 247B3, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

A26B* 226B3, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

*Requires high flow or high flow XPS option on machine.

15-78 Edition 44


15

Skid Steer LoadersMulti Terrain LoadersCompact Track Loaders


Edition 44 15-79

MODEL A14B A19B A26BA Overall width with bracket 1152 mm 45" 1152 mm 45" 1152 mm 45"

B Overall length with bracket 593 mm 23" 593 mm 23" 593 mm 23"

C Overall drive unit height 1020 mm 40" 940 mm 37" 978 mm 39"

D Housing diameter 252 mm 10" 252 mm 10" 252 mm 10"

E Swing range 102° 102° 102°

Drive unit weight with hydraulic lines without bit 84 kg 185 lb 84 kg 185 lb 91 kg 201 lb

Mounting frame weight with clevis 87 kg 192 lb 87 kg 192 lb 91 kg 201 lb

Total weight without bit 171 kg 317 lb 166 kg 366 lb 182 kg 402 lb

Drive method Gerotor Motor —Direct

Gerotor Motor —Single Planetary Reduction

Gear Motor — Double Planetary Reduction

Required hydraulic flow range 42-86 L/min 11-23 gpm 42-86 L/min 11-23 gpm 95-130 L/min 25-34 gpm

Optimal hydraulic pressure range 145-235 bar 2100-3400 psi 145-235 bar 2100-3400 psi 207-290 bar 3002-4206 psi

Effective displacement 629.1 cm3/rev 38.39 in3/rev 250 cm3/rev 15.26 in3/rev 43.77 cm3/rev 2.685 in3/rev

Drive shaft torque @ maximum pressure* 2304 N·m 1700 lb-ft 4122 N·m 3040 lb-ft 6826 N·m 5034 lb-ft

Bit speed (drive shaft) @ maximum flow 127 RPM 71 RPM 81 RPM

HEX output shaft size 51 mm 2" 51 mm 2" 51 mm 2"

Auger bit retention method Cross bolts/nuts Cross bolts/nuts Cross bolts/nuts

Hydraulic hose Cat XT-3 ES Cat XT-3 ES Cat XT-6 ES

*Theoretical values calculated at 100% efficiency.

B A

C

D

E



A14B AugerTheoretical Bit Speed Theoretical Digging Torque

L/min gpm RPM bar psi N·m lb-ft42 11 54 145 2100 1764 130045 12 59 152 2200 1848 136249 13 64 159 2300 1932 142453 14 69 166 2400 2016 148657 15 74 172 2500 2100 154861 16 79 179 2600 2184 161064 17 84 186 2700 2268 167268 18 89 193 2800 2352 173472 19 94 200 2900 2436 179576 20 99 207 3000 2520 185780 21 104 214 3100 2604 191983 22 109 221 3200 2688 198187 23 114 228 3300 2772 2043


L/min gpm RPM bar psi N·m lb-ft42 11 38 145 2100 2535 186845 12 41 152 2200 2655 195649 13 45 159 2300 2776 204553 14 48 166 2400 2897 213457 15 52 172 2500 3017 222361 16 55 179 2600 3138 231264 17 59 186 2700 3259 240168 18 62 193 2800 3379 249072 19 65 200 2900 3500 257976 20 69 207 3000 3621 266880 21 72 214 3100 3741 275783 22 76 221 3200 3862 284687 23 79 228 3300 3983 2935


L/min gpm RPM bar psi N·m lb-ft 95 25 61 207 3000 4719 3492 99 26 64 214 3100 4880 3611102 27 66 220 3200 5034 3725106 28 69 227 3300 5191 3841110 29 71 234 3400 5348 3958114 30 74 241 3500 5506 4074118 31 76 248 3600 5663 4191121 32 79 255 3700 5820 4307125 33 81 262 3800 5977 4423129 34 84 269 3900 6135 4540133 35 86 276 4000 6292 4656136 36 88 282 4100 6449 4772140 37 91 289 4200 6607 4889144 38 93 296 4300 6764 5005148 39 96 303 4400 6921 5122152 40 98 310 4500 7079 5238

15-80 Edition 44




15

Work Tools● Brushcutters

Edition 44 15-81

Features:● High-strength blades deliver high cutting action and

durability, and also mulch overgrowth. ● Fully balanced blade carriers prevent unnecessary

vibration. ● High-strength frame with reinforced corner gussets

provide strength in critical areas. ● Long life motors deliver years of high-speed blade

performance. ● Machined and heat treated gears in sealed gearbox

provide reliable, durable transfer of torque from motor to blade carrier.

● Tapered blade carrier allows cutter to ride up over stumps and rocks.

● Galvanized coil chains provide debris guarding in the front and rear areas to restrict flying debris and material.

● Heavy-duty skids allow easy movement of the brush-cutter through uneven terrain while maintaining sta-bility of the work tool and machine.

● Motor protection guard shields motor and gear box from debris. Removing a set of bolts allows this hinged guard to be moved away for easy access to motor and gear box.

● Cat XT-3 hose, couplings and O-ring face seals pro-vide superior, leak-free performance and reliability. All hoses are wrapped with nylon woven cordura sleev-

ing for added operator protection. Hydraulic quick disconnects enable fast tool changes.

● Quick coupler with rugged, opposing edge design holds the work tool securely and allows the operator to quickly change from one high performance Cat Work Tool to another.

Cat Brushcutters are used for clearing overgrowth from highway medians, utility easements and for ini tial land clearing for housing, parks and recreational areas.

Machine CompatibilityBrushcutter Model Machine Models

BR160 226B3, 247B3BR166# 226B3, 247B3, 236D, 242D,

246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

BR172# 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

BR272* 226B3BR378*# 246D, 262D, 272D, 272D XHP,

277D, 279D, 287D, 289D, 299D, 299D XHP

* Requires high flow or high flow XPS option on machine. Operates in high flow XPS on XHP machine.

#Requires a conversion kit for D Series machines.



Work Tools● Brushcutters

15-82 Edition 44

MODEL BR160 BR166 BR172A Overall width 1575 mm 62" 1727 mm 68" 1880 mm 74"

B Overall length 1854 mm 73" 2007 mm 79" 2159 mm 85"

C Overall height 533 mm 21" 533 mm 21" 518 mm 20"

Cutting width 1524 mm 60" 1676 mm 66" 1829 mm 72"

Maximum cutting diameter 76 mm 3" 76 mm 3" 76 mm 3"

Unit weight 431 kg 950 lb 476 kg 1050 lb 499 kg 1100 lb



Tip speed range (depends on flow)

3987-5596 m/min

13,080-18,360 ft/min

3130-4395 m/min

10,270-14,420 ft/min

3417-4795 m/min

11,210-15,730 ft/min

MODEL BR272 BR378A Overall width 1880 mm 74" 2032 mm 80"

B Overall length 2159 mm 85" 2311 mm 91"

C Overall height 518 mm 20" 531 mm 21"

Cutting width 1829 mm 72" 1981 mm 78"

Maximum cutting diameter 76 mm 3" 76 mm 3"

Unit weight 508 kg 1120 lb 535 kg 1180 lb

Required hydraulic flow range 76-100 L/min 20-26 gpm 76-130 L/min 20-34 gpm

Optimal hydraulic pressure range 150-230 bar 2176-3300 psi 150-280 bar 2176-4060 psi

Tip speed range (depends on flow)

4554-5992 m/min

14,940-19,660 ft/min

4176-6032 m/min

13,700-19,790 ft/min




15

Work Tools● Cold Planers

Edition 44 15-83

Features:● Self-leveling design automatically levels itself when

placed on the ground for consistent depth control with-out operator adjustments and excellent spoil retention.

● Two wear resistant skid plates remain parallel to the ground for optimum stability.

● Hydraulic side-shift permits close planing to curbs, walls and other obstructions.

● Independent left/right depth control allows maximum drum depths to be adjusted independently on each skid. The gauges are easily viewable from the cab. Independent depth control is mechan ical on stan-dard flow planers and hydraulic on high flow planers.

● Max Pro Pressure gauge provides operator feedback to adjust speed for maximum productivity in chang ing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Stan-dard on XHP models.

● Float, spring tilt and hydraulic tilt enables planers to follow the contour of the surface. Float is activated by a knob and is only available on high flow and XHP planers. Spring tilt and hydraulic tilt enable planers to oscillate for angled cuts. Tilt is hydraulically con-trolled on high flow models and spring controlled on standard flow planers.

● Direct drive on standard flow models features a vari-able speed, unidirectional, gerotor style hydraulic motor.

● Planetary drive on high flow and XHP models fea tures a vari able speed, unidirectional, axial piston style hydrau-lic motor mounted to a double reduction gearbox.

● Optional concrete bits and water sprinkler kits are available for all models.

● Cat XT-3 and medium pressure hose, couplings and O-ring face seals provide superior, leak-free perfor-mance and reliability.


Conical Bits: Cold planer drums are designed with an optimal bit pattern to provide maximum cutting per for mance and efficiency, while ensuring superior surface texture. Standard all-purpose tungsten carbide inserted conical bits provide all-purpose planing in most applications.

Market Opportunities● Infrastructure/Heavy Construction — Skid steer mounted

cold planers are frequently used on bridges to remove pavement where large dedicated planers are restricted due to weight.

● Concrete/Masonry (Including Asphalt/Paving) — Cold planers are used extensively by paving contrac-tors in urban and rural settings to remove damaged pavement prior to overlay, remove excess pavement, provide specific surface texture (skid resistance), remove traffic lane stripes and re-estab lish proper draining characteristics of pavement.

● Governmental/Municipalities (Street and Road Main-te nance) — Cold planers are ideal for urban road and parking lot maintenance departments to remove cracked or deteriorated pavement, mill ing bumps or imperfections in expanded pavement.

Cold planers are highly utilized work tools for spe-cialized applications. They are often used in conjunc-tion with a bucket and broom.

Machine CompatibilityCold Planer Model Machine Models

PC104B 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

PC205B* 226B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

PC306B# 226B3, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

PC310B# 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

PC408B 272D XHP, 299D XHPPC412B 272D XHP, 299D XHP

* Requires high flow option on machine. Operates in standard flow on high flow XPS or XHP option machines.

# Requires high flow XPS option on machine. Operates in high flow XPS on XHP machines.




15-84 Edition 44

MODEL PC104B PC205B PC306BA Overall width 1730 mm 68" 1730 mm 68" 1858 mm 74"

B Maximum drum width 350 mm 14" 450 mm 18" 600 mm 24"

Optional drum widths (depths) 400 (150) mm 16 (6)" 80 (200) mm 3 (8)" 80 (200) mm 3 (8)"

152 (200) mm 6 (8)" 152 (200) mm 6 (8)"

203 (200) mm 8 (8)" 203 (200) mm 8 (8)"

305 (200) mm 12 (8)" 305 (200) mm 12 (8)"

350 (200) mm 14 (8)" 350 (200) mm 14 (8)"

400 (150) mm 16 (8)" 400 (200) mm 16 (8)"

450 (150) mm 18 (6)" 450 (150) mm 18 (6)"

600 (180) mm 24 (7)"


D Length 1120 mm 44" 1184 mm 47" 1240 mm 49"

Weight 670 kg 1474 lb 730 kg 1606 lb 935 kg 2061 lb

Drive method Direct drive Planetary drive Planetary drive


Optimal hydraulic pressure range 230 bar 3330 psi 230 bar 3330 psi 230-280 bar 3330-4000 psi

Drum torque @ max. pressure 1350 N·m 996 lb-ft 2047 N·m 1510 lb-ft 3470 N·m 2558 lb-ft

Drum speed @ max. flow 150-200 RPM 142-205 RPM 160 RPM

Number of conical bits 42 per 350 mm 48 per 450 mm 60 per 600 mm

13.8" drum 18" drum 24" drum

Standard bit type All purpose All purpose All purpose

Maximum depth of cut 150 mm 6" 150 mm 6" 170 mm 7"

Tilt angle range ±8.5° ±8.5° ±8°

Side shift travel 650 mm 26" 650 mm 26" 750 mm 30"

A

B C

D




15


MODEL PC310B PC408B PC412BA Overall width 1858 mm 73" 1858 mm 73" 1858 mm 73"

B Maximum drum width 1000 mm 39" 750 mm 30" 1200 mm 47"

Optional drum widths (depths) — 80 (200) mm 3 (8)" —

152 (200) mm 6 (8)"

203 (200) mm 8 (8)"

305 (200) mm 12 (8)"

350 (200) mm 14 (8)"

400 (200) mm 16 (8)"

450 (200) mm 18 (8)"

610 (178) mm 24 (7)"


D Length 1140 mm 45" 1270 mm 50" 1140 mm 45"


Drive method Planetary drive Planetary drive Planetary drive

Required hydraulic flow range 125 L/min 33 gpm 150 L/min 40 gpm 150 L/min 40 gpm

Optimal hydraulic pressure range 280 bar 4000 psi 280 bar 4000 psi 280 bar 4000 psi

Drum torque @ max. pressure 3350 N·m 2470 lb-ft 3724 N·m 2746 lb-ft 4108 N·m 3030 lb-ft

Drum speed @ max. flow 166 RPM 143 RPM 161 RPM

Number of conical bits 78 per 1000 mm 60 per 750 mm 90 per 1200 mm

40" drum 30" drum 47" drum

Standard bit type All purpose Extreme aspahlt Extreme aspahlt


Tilt angle range ±6.5° ±6.5° ±6.5°

Side shift travel 650 mm 26" 650 mm 26" 550 mm 22"

Edition 44 15-85

A

B C

D



Work Tools● Landscape Tillers

15-86 Edition 44

Features:● Two sizes available: the 1321 mm (52") working width

LT13B and the 1854 mm (73") working width LT18B. Both units efficiently utilize the standard flow aux il-iary hydraulic horsepower capabilities of Cat Skid Steer Loaders.

● Direct drive system features two in-line motors that transmit power directly from the drive motor shaft to the tiller shaft. Power to both ends of the shaft elim-inates torque twist and increased system performance.

● Adjustable skid shoes provide a working depth range of 25-152 mm (1"-6").

● High strength medium carbon alloy steel tines are hard-ened for maximum strength, durability and wear life in the toughest soil conditions.

● Cat XT-3 hose and O-ring face seals are used through-out for superior leak-free performance.

Market Opportunities● Agriculture — Landscape tillers provide an effective

work tool around the farm or orchard to breakup and condition soil prior to planting.

● Building/General Construction — Landscape tillers can be used on construction sites to level soil and remove ruts.

● Landscaping/Landscape Maintenance — Land scape tillers are ideal for mixing and composting soils for improved seedbeds, soil stabilization and soil prep a-ra tion prior to landscaping and laying sod.

● Governmental/Municipalities — Landscape tillers are ideal for city maintenance departments and parks to recondition, level and stabilize soil after utility work or prior to yearly landscaping.

Landscape tillers are productive work tools for spe-cial ized applications. They are often used in conjunc-tion with a bucket, landscape rake and auger.

Machine CompatibilityLandscape Tiller Model Machine Models

LT13B 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

LT18B 247B3, 236D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP




15

Work Tools● Landscape Tillers

Edition 44 15-87

MODEL LT13B LT18BA Overall width 1788 mm 70.5" 2271 mm 89.5"

B Working width 1321 mm 52" 1847 mm 73"

C Height 755 mm 30" 755 mm 30"

D Length 956 mm 38" 956 mm 38"

Working depth range 25-152 mm 1"-6" 25-152 mm 1"-6"

Weight 340 kg 750 lb 420 kg 926 lb

Drive method Direct drive Direct drive

Number of motors Two in-line Two in-line

Hydraulic flow range 42-86 L/min 11-23 gpm 60-114 L/min 16-30 gpm

Hydraulic pressure range 145-235 bar 2100-3400 psi 207-310 bar 3000-4500 psi

Motor size 305 cm3 18.6 in3 305 cm3 18.6 in3

Effective displacement 629.1 cm3 38.4 in3 629.1 cm3 38.4 in3

Drum speed @ maximum flow 127 RPM @ 80 L/min

127 RPM @ 21 gpm

127 RPM @ 80 L/min

127 RPM @ 21 gpm

Fasteners Cat Cat

Hydraulic hose Cat XT-3 ES Cat XT-3 ES

Number of tines 24 36



Work Tools● Landscape Rakes

15-88 Edition 44

Features:● Two sizes available: the 1321 mm (62") working width

LR15B and the 1880 mm (74") working width LR18B. Both units efficiently utilize the standard flow aux il-iary hydraulic horsepower capabilities of Cat Skid Steer Loaders.

● Chain reduction drive system features #80H roller chain for strength and durability, a variable speed unidirectional gerotor motor for maximum per for-mance and cartridge relief valve for system protection.

● Durable #2060H conveyor chain provides strength, durability and long life in a variety of soil conditions.

● High strength medium carbon alloy steel teeth are hardened for maximum strength, durability and wear life in the toughest soil conditions.

● Quick dumping capability is accomplished with a poppet check valve. Once the hopper bucket is full, simply reverse flow to actuate the rake head and dump the bucket.


Market Opportunities● Agriculture — Landscape rakes provide an effective

work tool around the farm or nursery to condition, level and remove rock and foreign material from soil prior to planting.

● Building/General Construction — Landscape rakes can be used on construction sites to level and remove debris from soil prior to landscaping and seeding.

● Demolition — Landscape rakes provide an excellent means to clean up loose material after the demoli-tion work is complete.

● Landscaping/Landscape Maintenance — Land scape rakes are ideal for aerating, conditioning, leveling and removing rocks from soil prior to seeding or lay ing sod. They also are ideal for conditioning and clean-ing baseball fields.

Landscape rakes are productive work tools for spe-cial ized applications. They are often used in conjunc-tion with a bucket, landscape tiller and auger.

Machine CompatibilityThe following are the recommended and approved

Cat machine/Landscape Rake combinations for maxi-mum system performance.

Landscape Rake Model Machine Models*LR15B 226B3, 247B3, 236D, 242D,

246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

LR18B 247B3, 236D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

* Lift restriction! Do not raise lift arm — work tool hinge higher than 1 m (3 ft) above the ground. Tipping can result.




15

Work Tools● Landscape Rakes

Edition 44 15-89

MODEL LR15B LR18BA Overall width 1683 mm 66" 1990 mm 78"


C Raking width 1384 mm 55" 1655 mm 65"

D Height 989 mm 39" 989 mm 39"

E Length 1620 mm 64" 1620 mm 64"

Weight 595 kg 1312 lb 653 kg 1440 lb

Drive method Chain reduction Chain reduction

Drive chain #80H #80H

Conveyor chain #2060H #2060H



Bucket capacity (struck)* 0.31 m3 0.4 yd3 0.34 m3 0.44 yd3

Motor size 305 cm3 18.6 in3 305 cm3 18.6 in3

Effective displacement 484.5 cm3 29.5 in3 484.5 cm3 29.5 in3

Driven shaft speed 165 RPM @ 80 L/min

165 RPM @ 21 gpm

165 RPM @ 80 L/min

165 RPM @ 21 gpm

Torque @ 230 bar (3336 psi) 1774 N·m 1310 lb-ft 1774 N·m 1310 lb-ft

Fasteners Cat Cat


Number of teeth 372 444

Rock size 19-52 mm 0.75"-6" 19-52 mm 0.75"-6"

*Rated struck capacities shown as per ISO 7546: 1983 and SAE J742 FEB85.

A

C

B

E

D



Work Tools● Mulchers

Features:● Dual speed, axial piston hydraulic motor provides

smooth, efficient performance while delivering optimal torque under changing material loads.

● Rugged mulching head processes trees up to 200 mm (8 in) diameter for effective forestry clearing applications.

● Single bolt retention, fixed tooth balanced rotor pro-vides excellent operating efficiency at high speed. Single bolt retention provides quick tooth replacement.

● Adjustable push frame is standard equipment and pro-vides the ability to position trees to allow for optimum cutting and efficiency. In forestry operation it also pro-vides operator cab protection.

● Pressure gauge provides operator feedback to adjust speed for maximum productivity in chang ing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Avail able on XHP models.

● Heavy-duty bearings extend work tool life.

● Hydraulically operated front hood is standard, allow-ing trees to be cut when opened and allows dense veg-etation to be mulched.

● Polychain belt drive provides abrasion resistance, shock load capability and protects against debris blockage.

● Rear chain guard protection reduces spread of material.

● Rigid, robust tempered steel construction pro vides fully guarded protection in tough applications.

● Cat XT-3 ES hose, couplings and O-ring face seals provide superior, leak-free performance and reli abil-ity. All hoses are wrapped with nylon woven cordura sleeving for added operator protection. Hydraulic quick disconnects enable fast tool changes.


The Cat Mulcher is designed for high-performance cutting, and mulching vegetation and undergrowth from typical forested terrain. The hydraulic mulcher reduces saplings, shrubs and trees into mulched mate-rial, making it ideal for environmental mainte nance, such as creating fire lanes. Other applications include: reclaiming untilled land, remov ing foliage from build-ing construction sites, and shredding pruned material and organic waste for biomass production.

Machine CompatibilityMulcher Model Machine Models

HM315B* 246D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

HM415B 272D XHP, 299D XHP* Requires high flow XPS option on machine. Operates in high flow XPS on XHP machines.

Debris Barrier package recommended.

15-90 Edition 44




15

Work Tools● Mulchers

Edition 44 15-91

MODEL HM315B HM415BA Overall width 1840 mm 72" 1840 mm 72"


C Length 1470 mm 58" 1470 mm 58"

D Overall height 1610 mm 63" 1610 mm 63"

Weight 1165 kg 2564 lb 1165 kg 2564 lb

Drive method Polychain belt Polychain belt

Hydraulic motor type Dual speed axial piston Dual speed axial piston

Hydraulic flow range 120-137 L/min 31.5-36 gpm 133-155 L/min 36-41 gpm


Drum speed range 2100-2400 RPM 1900-2200 RPM

Number of teeth 34 34

Maximum diameter of material to be cut 200 mm 8" 200 mm 8"

B

AC

D



Work Tools● Power Box Rakes

15-92 Edition 44

Features:● A heavy-duty frame, pivot plate and attachment plate

are featured for reliable operation in rugged terrain and abusive soil conditions.

● Pure carbide, blunt shaped teeth create a dimpled sub-surface to ensure the best possible seedbed sub-base fracture pattern.

● Two-position winged endplates allow close raking to side walks or foundations. They can remain parallel, even during angling, for smoother plowing.

● Convenient, heavy-duty, deep skid-resistant step and a generous cab allow for easy operator entry and exit.

● Dual independently adjustable gauge wheels allow for skim passes for over-seeding or adjust to cut drainage grades.

● Cat XT-3 ES hose, couplings and O-ring face seals provide superior, leak-free performance and reliabil-ity. All hoses are wrapped with nylon woven cordura sleeving for added operator protection. Hydraulic quick disconnects enable fast tool changes.


Cat Power Box Rakes are ideal for clearing and pre-paring soil in general construction trench restoration, golf course construction and athletic field main te-nance. They offer the versatility to de-thatch, remove old lawns and weeds, grade, level, rake, remove debris and prepare seedbeds with one work tool. Their angl-ing ability allows the operator to windrow collected debris for easy pickup and removal. The consistent milling action creates an ideal seedbed for great ger mination results, laying the groundwork for a per fect lawn. Wet, dry, weedy, hard and rocky soil can be dried, flattened, pulverized and conditioned for seed in one step.

Machine CompatibilityPower Box Rake Model Machine Models

PR172 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP






15

Work Tools● Power Box Rakes

Edition 44 15-93

MODEL PR172 PR184 PR190A Overall width 2057 mm 81" 2362 mm 93" 2515 mm 99"

B Width over tires 1386 mm 55" 1732 mm 68" 1845 mm 73"

C Roller width 1829 mm 72" 2134 mm 84" 2286 mm 90"

D Overall height 847 mm 34" 847 mm 34" 953 mm 38"

E Overall length 1626 mm 64" 1626 mm 64" 1626 mm 64"

Raking width at maximum angle 1727 mm 68" 2007 mm 79" 2159 mm 85"

Unit weight (Manual) 408 kg 900 lb 465 kg 1026 lb 588 kg 1296 lb

Unit weight (Hydraulic) 420 kg 925 lb 476 kg 1050 lb 599 kg 1320 lb

Maximum working angle 20° 20° 20°

Hydraulic flow required 49-86 L/min 13-23 gpm 51-86 L/min 15-23 gpm 51-86 L/min 15-23 gpm

Hydraulic pressure 230 bar 3340 psi 230 bar 3340 psi 230 bar 3340 psi



Work Tools● Trenchers

15-94 Edition 44

Features:● Direct drive system features a variable speed, bidirec-

tional, gerotor style motor that delivers optimal chain speed, chain pull and torque for max imum trenching performance in a broad range of soil types.

● Durable double standard anti-backflex chain is stan-dard for strength, durability and long life in all soil types.

● Standard boom lengths for all-purpose performance. Replaceable weld-on wear strips extend boom life.

● Hardfaced, tungsten carbide steel cupped teeth are stan-dard for long life in many soil conditions. Teeth are spaced for optimum digging performance in most soil.

● Hydraulic or manual side-shift on the T6B and T9B provides close trenching flexibility near structures or obstructions.

● Hydraulic side-shift on the T15B is controlled from the operator’s compartment using the standard flow auxiliary hydraulic circuit selector control.

● Optional cutting widths and crumber bars are avail-able for wider trenching requirements and loose mate-rial removal.


Market Opportunities● Agriculture — Trenchers provide an effective work tool

around the farm or nursery to cut trenches for water lines, electrical cables and other utilities.

● Building/General Construction — Trenchers are often used on construction sites to cut trenches for plumb-ing, electrical, telephone and cable television lines.

● Landscaping/Landscape Maintenance — Trenchers are popular landscaping work tools when installing irrigation and water sprinkler systems. They can also be used to remove roots that grow too close to build ings or cart paths. Land scapers, golf course mainte nance departments and irrigation contractors are prime users.

● Specialty Trades/Utilities — Trenchers are excellent work tools for specialty trades and utility contractors that need to bury water and gas pipe, conduit, electrical, telephone and cable television lines.

Trenchers are productive work tools for specialized applications. They are often used in conjunction with a bucket and auger.




15


Edition 44 15-95

Machine CompatibilityTrencher Model Machine Models

T6B 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

T9B 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

T15B* 226B3, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP


T6B/T9B TrencherTheoretical Drive Shaft Torque

Pressure Torque

bar psi N·m lb-ft

145 2100 848 625

152 2200 889 655

158 2300 924 681

166 2400 971 716

172 2500 1006 741

179 2600 1047 772

186 2700 1088 802

193 2800 1129 832

200 2900 1170 863

207 3000 1211 893

214 3100 1252 923

220 3200 1287 949

227 3300 1328 979

T15B TrencherTheoretical Drive Shaft Torque

Pressure Torque

bar psi N·m lb-ft

207 3000 1916 1413

214 3100 1981 1461

220 3200 2036 1501

227 3300 2101 1549

235 3400 2175 1604

242 3500 2240 1652

248 3600 2295 1692

255 3700 2360 1740

262 3800 2425 1788

269 3900 2490 1836

276 4000 2555 1884

283 4100 2619 1931

290 4200 2684 1979

297 4300 2749 2027

304 4400 2814 2075

311 4500 2878 2122




15-96 Edition 44

MODEL T6B T9B T15BA Overall width 1426 mm 56" 1901 mm 74.8" 1901 mm 74.8"

B Overall length 2348 mm 92" 2705 mm 106.5" 3010 mm 118.5"

C Side shift travel (center to right) 419 mm 16.5" 559 mm 22" 559 mm 22"

D Height 786 mm 30.9" 786 mm 30.9" 786 mm 30.9"

Max. auger clearance 534 mm 21" 534 mm 21" 534 mm 21"

Spoil auger diameter 457 mm 18" 457 mm 18" 457 mm 18"

Standard boom length 914 mm 36" 1219 mm 48" 1524 mm 60"

Weight 397 kg* 875 lb* 551 kg** 1215 lb** 601 kg*** 1325 lb***



Motor size 393.9 cm3 24.0 in3 393.9 cm3 24.0 in3 629.1 cm3 38.4 in3

Theoretical drive shaft torque 1447 N·m 1068 lb-ft 1447 N·m 1068 lb-ft 2905 N·m 2144 lb-ft

Chain pull @ max. pressure1 1207 kg 2661 lb 1207 kg 2661 lb 2424 kg 5344 lb

Chain speed @ max. flow2 155 m/min 508.5 ft/min 155 m/min 508.5 ft/min 158 m/min 518.3 ft/min

Drive shaft speed @ max. flow 203 RPM @ 203 RPM @ 207 RPM @80 L/min 21 gpm 80 L/min 21 gpm 129 L/min 21 gpm

Optional cutting widths 152, 203, 254, 305 mm

(6", 8", 10", 12")

152, 203, 254, 305 mm

(6", 8", 10", 12")

152, 203, 254, 305 mm

(6", 8", 10", 12")

*** T6B bare configuration, no chain.*** T9B equipped with 1219 mm (48") boom, hydraulic side shift control, double standard anti-backflex chain, 203 mm (8") cutting width, 50/50 carbide/cup chain.*** T15B equipped with 1524 mm (60") boom, double standard anti-backflex chain, 203 mm (8") cutting width, 50/50 carbide/cup chain. 1Max. Pressure: T6B, T9B — 230 bar (3335 psi), T15B — 290 bar (4206 psi). 2Max. Flow: T6B, T9B — 80 L/min (21 gpm), T15B — 130 L/min (34 gpm).

A

C

B

D




15

Work Tools● Vibratory Compactors

Edition 44 15-97

Features:● Caterpillar exclusive vibratory pod design delivers desired

balance between frequency and amplitude to provide a superior matte finish. Pod-style weight housings are factory sealed for longer bearing life and easy serviceability.

● Higher compaction forces provide twice the compac-tion force of the original design requiring fewer passes for greater productivity.

● Replaceable rubber mounts isolate vibration and enhance vibratory capabilities.

● Durable high-strength steel drums are roll formed and finish welded for a smoother surface and longer life.

● Pivoting interface allows the drum to oscillate ±15° and follow the contour of the ground.


Market Opportunities● Building/General Construction — Vibratory com pac-

tors can be used on construction sites to level and com-pact soil around building foundations after backfilling.

● Governmental/Municipalities (Street and Road Main-te nance) — Vibratory compactors are useful work tools for compacting soil and crushed rock prior to paving or pouring concrete. They are also useful for compacting small areas of asphalt (pothole repair).

● Landscaping/Landscape Maintenance — Vibratory compactors are used by landscaping contractors after installing irrigation and water sprinkler systems. Golf course maintenance departments will often use this product to compact greens and fairways.

● Paving — Vibratory compactors are used by pav ing contractors for smaller paving jobs (compacting soil and crushed stone), compacting hot patch (pot hole repair) or compacting material in tight areas where a dedicated roller can’t maneuver.

● Specialty Trades/Utilities — Vibratory compactors are ideal for compacting back-filled soil after trench-ing and backhoe work.

Vibratory compactors are productive work tools for specialized applications. They are often used in conjunc-tion with a bucket, cold planer and trencher.

Machine CompatibilityVibratory Compactor Model Machine Models*

CV16B 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

CV18B 246D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

* Lift restriction! Do not raise lift arm — work tool coupler interface higher than 1 m (3 ft) above the ground. Tipping can result.



Work Tools● Vibratory Compactors

15-98 Edition 44

MODEL CV16B CV18BA Overall width 1854 mm 73" 2032 mm 80"

B Drum width 1676 mm 66" 1854 mm 73"


D Overall length 1009 mm 40" 1009 mm 40"

Drum diameter 634 mm 25" 634 mm 25"

Weight 936 kg 2063 lb 970 kg 2138 lb


Number of motors 1 1

Motor size 28.2 cm3 1.72 in3 28.2 cm3 1.72 in3



Drum oscillation range ±15° ±15°

Drum frequency @ maximum flow 2946 vibrations/min 2946 vibrations/min

Dynamic force 5399 kg 11,903 lb 5399 kg 11,903 lb

Amplitude 1.16 mm 0.046" 1.09 mm 0.043"




15

Work Tools● Brooms

Edition 44 15-99

Features:● Pickup Brooms sweep and deposit material into an

integrated hopper bucket for easy removal and dump-ing. Bidirectional capabilities of the bristles allow Pickup and Utility Brooms to sweep in forward or reverse machine travel. Optimum sweeping style is in forward travel, resulting in over-the-brush pickup. Certain conditions require a dust pan style of sweep-ing, done in reverse travel.

● Utility Brooms sweep and collect light debris on smooth surfaces in forward or reverse travel. They can be adjusted for greater bristle down-force in tough applications such as sweeping course material out of a cold planer cut.

● Angle Brooms use a single variable speed, unidi rec-tional gerotor style hydraulic motor, contained in a protective housing. They use a windrowing action to move loose debris ahead and to the side of the sur face being swept. They can be oriented straight or angled up to 30° left or right of center in forward travel.

● Direct drive motors provide maximum performance and durability. Pickup and Utility Brooms use a single variable speed, bidirectional gerotor style hydraulic motor, contained in a special housing that is adjust-able to compensate for bristle wear. Angle brooms use a single variable speed unidirectional gerotor style hydraulic motor contained in a protective housing.

● Polypropylene/wire convoluted brushes provide opti-mum results for sweeping. Optional all-polypropylene and all-steel wire convoluted brushes are available for specialty applications. Convoluted brush sections are available in half-kits for easy maintenance and quick replacement.

● Drop core design allows for quick bristle replace ment without removing hydraulic hoses.


Market Opportunities● Building/General Construction — Brooms are often

found on construction sites once the construction is complete to remove and collect dirt, rock and other construction debris from driveways, sidewalks and streets.

● Demolition — Brooms are ideal for collecting loose dirt and debris from demolition sites.

● Governmental/Municipalities (Street and Road Main-te nance) — Brooms are useful work tools for cleaning city streets, sidewalks and parking areas. Airport main-tenance is another popular application.

● Industrial/Recycling — Pickup brooms are excellent for cleaning factory floors or industrial pavements.

● Landscaping/Landscape Maintenance — Brooms are used by landscaping contractors to clean paved sur-faces after the landscaping is complete. Golf course maintenance departments will often use this product to clean cart paths, parking lots and even turf.

● Paving — Pickup brooms are often used by pav ing con-tractors to sweep and collect milled asphalt and con-crete. Angle brooms are used to clean milled surfaces.

● Specialty Trades/Utilities — Brooms are often utilized by specialty trades and utility contractors to clean up after trenching and backhoe work.

Pickup brooms are productive work tools for spe cial-ized applications. They are often used in conjunction with a bucket, cold planer and trencher.

Machine CompatibilityBroom Model Machine Models

BP15B 226B3, 236D, 242D, 246D, 247B3, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

BP18B 236D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

BA18 226B3, 236D, 242D, 246D, 247B3, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

BU115 226B3, 236D, 242D, 246D, 247B3, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

BU118 236D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP




15-100 Edition 44

MODELBP15B

Pickup BroomBP18B

Pickup BroomBA18

Angle BroomA Overall width 1912 mm 75" 2217 mm 87" 2312 mm 91"

AA Overall width angled* — — — — 2328 mm 92"

B Sweeping width 1524 mm 60" 1829 mm 72" 2134 mm 84"

BB Sweeping width angled* — — — — 1848 mm 73"

C Height 754 mm 30" 1632 mm 64" 1718 mm 68"

D Length 1632 mm 64" 1575 mm 62" 1676 mm 66"

Weight** 435 kg 960 lb 468 kg 1032 lb 409 kg 901 lb

Drive method Direct drive Direct drive Direct drive

Number of motors One Two in-line One

Motor size 250 cm3 15.3 in3 200 cm3 each 12.2 in3 each 410 cm3 24.9 in3

Hydraulic flow range 30-86 L/min 8-23 gpm 30-86 L/min 8-23 gpm 60-86 L/min 16-23 gpm

Hydraulic pressure range 145-235 bar 2100-3400 psi 145-235 bar 2100-3400 psi 145-235 bar 2100-3400 psi

Rated brush speed @ maximum flow 197 RPM 197 RPM 197 RPM

Hopper capacity*** 0.42 m3 0.55 yd3 0.45 m3 0.59 yd3 — —

Fasteners Cat Cat Cat

Hydraulic hose Cat XT-3 ES Cat XT-3 ES Cat XT-3 ES

Brush diameter 660 mm 26" 660 mm 26" 813 mm 32"

Brush head retention Dual chain/loader arm bracket

Dual chain/loader arm bracket —

Brush material (standard) Replaceable polypropylene/steel wire sections

Replaceable polypropylene/steel wire sections

Replaceable polypropylene/steel wire sections

***30° right or left.***Without gutter brush.***Rated struck capacities shown as per ISO 7546:1983 and SAE J742 FEB85.

Pickup Brooms

Angle Brooms




15


Edition 44 15-101

MODELBU115

Utility BroomBU118

Utility BroomA Overall width 1810 mm 71" 2115 mm 83"

B Sweeping width 1510 mm 59" 1865 mm 73"

C Height 1920 mm 76" 2225 mm 88"

D Length 793 mm 31" 793 mm 31"



Number of motors 1 1

Motor size 393 cm3 24 in3 393 cm3 24 in3



Rated brush speed @ maximum flow 220 RPM 220 RPM

Hopper capacity* 0.42 m3 0.55 yd3 0.49 m3 0.64 yd3

Fasteners Cat Cat


Brush diameter 660 mm 26" 660 mm 26"

Brush material (standard) Replaceable polypropylene sections Replaceable polypropylene sections

Brush material (optional) Replaceable steel wire sections Replaceable steel wire sections

*Rated struck capacities shown as per ISO 7546:1983 and SAE J742 FEB85.

Utility Brooms



Work Tools● Stump Grinders

15-102 Edition 44

Features:● Two direct drive models, the standard flow SG16B

and the high flow SG18B feature a variable speed, unidirectional motor that is matched to the Cat Skid Steer Loader’s auxiliary hydraulic horsepower capa-bilities. Provides high torque for efficient grinding performance.

● Heavy-duty 550 mm (22") cutting wheel and 32 bolt-on carbide teeth provide maximum dura bility and cutting efficiency.

● Heavy-duty, dual height, pivoting stand feet provide a stable platform when grinding.

● Standard hydraulic cutting wheel swing (full 70 degrees) and extension [279 mm (11 in) max.].

● Hydraulic depth control on SG18B, depth control on SG16B is manually adjustable using a 3-position depth control bar.

● Extension slider rods are chrome plated for long life.

● Cat XT-3 and medium pressure hose, couplings and O-Rings.

Market Opportunities● Landscaping/Landscaping Maintenance — Stump grind-

ers are ideal for economically removing tree stumps in residential, commercial and agricultural settings.

● Rental — Stump grinders are a high opportunity rental work tool for lawn care and for clean up after nat u-ral disasters such as tornadoes and hurricanes where many trees are damaged.

Stump grinders are productive work tools for spe cial-ized applications. Maneuverability and compact size compared to tow behind stump grinders lend it be to very popular in lawn care and golf course maintenance.

Machine CompatibilityStump Grinder Model Machine Models

SG16B 226B3, 247B3, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP

SG18B* 226B3, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP





15


Edition 44 15-103

MODEL SG16B SG18BA Overall width 1175 mm 46" 1175 mm 46"

B Overall length 1737 mm 69" 1737 mm 69"


Unit weight 379 kg 775 lb 400 kg 840 lb

Drive method Gerotor Motor — Direct Gerotor Motor — Direct

Required hydraulic flow 42-86 L/min 11-23 gpm 95-125 L/min 25-33 gpm

Optimal hydraulic pressure 145-235 bar 2100-3400 psi 207-310 bar 3000-4500 psi

Effective displacement 80 cm3 4.9 in3 100 cm3 6.2 in3

Drive shaft torque @ maximum pressure 295 N·m @ 230 bar

218 lb-ft @ 3336 psi

469 N·m @ 290 bar

346 lb-ft @ 4206 psi

Cutting head speed (drive shaft) @ maximum flow

993 RPM @ 80 L/min

993 RPM @21 gpm

1280 RPM @ 130 L/min

1280 RPM @ 34 gpm

Cutting wheel width (with teeth) 83 mm 3.3" 83 mm 3.3"

Cutting wheel diameter (with teeth) 550 mm 22" 550 mm 22"

Cutting width (full swing range) 1524 mm 60" 1524 mm 60"

Cutting head swing range 70° 70°

Cutting height (above ground) 470 mm 18.5" 470 mm 18.5"

Cutting height (below ground) 521 mm 20.5" 521 mm 20.5"

Cutting head extension 280 mm 11" 280 mm 11"

Fasteners Cat Cat

Hydraulic hose XT-3 ES, medium pressure XT-6 ES, medium pressure

Ground Engaging Tools (GET) 12.7 mm (1/2") square bolt-on carbide teeth

12.7 mm (1/2") square bolt-on carbide teeth

Number of carbide teeth per cutting wheel 32 32

C

B A




15-104 Edition 44

SG16B Stump GrinderTheoretical Drive Shaft Torque

Pressure Torquebar psi N·m lb-ft145 2100 186 137152 2200 194 143158 2300 204 150166 2400 212 156172 2500 222 163179 2600 230 169186 2700 239 176193 2800 248 182200 2900 257 189207 3000 265 195214 3100 275 202220 3200 283 208227 3300 292 215

SG18B Stump GrinderTheoretical Drive Shaft Torque

Pressure Torquebar psi N·m lb-ft207 3000 336 247214 3100 347 255221 3200 358 263227 3300 370 272234 3400 381 280241 3500 392 288248 3600 403 296255 3700 413 304262 3800 426 313269 3900 437 321276 4000 447 329282 4100 458 337289 4200 471 346296 4300 481 354303 4400 492 362310 4500 503 370

SG16B Stump GrinderTheoretical Cutting Head Speed (Drive Shaft)

Flow Cutting Head SpeedL/min gpm RPM

42 11 51945 12 56649 13 61353 14 66057 15 70761 16 75464 17 80168 18 84972 19 89676 20 94380 21 99083 22 1037

SG18B Stump GrinderTheoretical Cutting Head Speed (Drive Shaft)

Flow Cutting Head SpeedL/min gpm RPM

95 25 931 99 26 969102 27 1006106 28 1043110 29 1080114 30 1118118 31 1155122 32 1192125 33 1230




15

Work Tools● Angle Blades

Edition 44 15-105

A Overall width (straight)* 1829 mm 72" 2134 mm 84"

B Working width, fully angled 1685 mm 66" 1949 mm 78"

C Height 614 mm 24" 614 mm 24"

D Length 753 mm 30" 753 mm 30"


Adjustable cutting depth (three positions — 25.4 mm (1") increments) 0, 25 and 51 mm 0", 1" and 2" 0, 25 and 51 mm 0", 1" and 2"

Maximum blade angle — (right or left of center) 30° 30°

Maximum blade trip angle 60° 60°

* Measured from moldboard edges; overall width is approximately 50 mm (2") wider with bolt-on edge.

A

D

C

B



Work Tools● Backhoes

15-106 Edition 44

MODEL BH150 BH160Operational Specifications

A Digging depth maximum 3074 mm 121" 3074 mm 121"

B Digging depth 0.61 m (2') flat bottom 3040 mm 120" 3040 mm 120"

C Digging depth 2.44 m (8') flat bottom 2593 mm 102" 2593 mm 102"

D Straight wall digging depth 2064 mm 81" 2064 mm 81"

E Overall operating height 3442 mm 136" 3442 mm 136"

F Loading height 2147 mm 85" 2147 mm 85"

G Loading reach 1628 mm 64" 1628 mm 64"

H Reach from swing pivot 3955 mm 156" 3955 mm 156"

K Overall length 2776 mm 109" 2936 mm 116"

Side shift length 822 mm 32" 974 mm 38"

Swing arc 180° 180°

Bucket rotation 192° 192°

Bucket breakout force 3241 kg 7146 lb 3241 kg 7146 lb

Stick breakout force 1560 kg 3439 lb 1560 kg 3439 lb

Transport Dimensions

L Transport height 2336 mm 92" 2336 mm 92"

N Boom pivot height 425 mm 17" 425 mm 17"

Ground clearance 85.7 mm 3.4" 85.7 mm 3.4"

Operating weight 1023 kg 2256 lb 1047 kg 2309 lb

2438 mm(8 ft)

610 mm(2 ft)

260 mm(10 in)

135 mm(5 in)




15

Work Tools● Material Handling Arm

Edition 44 15-107

A Width with side step 1309 mm 52"

B Height 1473 mm 58"

C Length 1016 mm 40"

D Load length (end point) 768 mm 30"

E Load length (mid point) 311 mm 12"

Rated structural capacity* 907 kg 2000 lb

Maximum reach (horizontal)** 2134 mm 84"

Weight 127 kg 280 lb

** Rated structural capacity is the maximum load that can be carried by the work tool and does not imply that the specific host machine has the tipping capacity to lift the load. Refer to the Cat Skid Steer Loader and Multi Terrain Loader Operation and Maintenance Manual (OMM) for Cat Skid Steer Loader and Multi Terrain Loader rated operating capacity with Material Handling Arm.

** Maximum horizontal reach is measured from the front tire with the loader arms approximately 1.5 m (5') off the ground and work tool tilted forward approxi-mately 68 degrees at the end point.

E

C

B

D

A



Work Tools● Snow Blowers

15-108 Edition 44

MODEL SR117 SR118 SR121A Intake width 1702 mm 67" 1854 mm 73" 2159 mm 85"

B Overall width 1765 mm 69.5" 1918 mm 75.5" 2223 mm 87.5"

C Cutting height 610 mm 24" 826 mm 33" 883 mm 35"

D Overall height 1797 mm 71" 1797 mm 71" 1797 mm 71"

E Overall length 1148 mm 45.2" 1209 mm 47.6" 1440 mm 56.7"


Maximum throw distance* 9.1 m 30'0" 12.2 m 40'0" 12.2 m 40'0"

Auger diameter 305 mm 12" 406 mm 16" 457 mm 18"

Impeller/fan diameter 517 mm 20" 517 mm 20" 679 mm 27"

Chute rotation 180° 180° 180°

Required hydraulic flow 53-75 L/min 14-20 gpm 68-83 L/min 18-22 gpm 68-87 L/min 18-23 gpm

MODEL SR318 SR321A Intake width 1584 mm 73" 2159 mm 85"

B Overall width 1918 mm 75.5" 2223 mm 87.5"

C Cutting height 826 mm 33" 883 mm 35"

D Overall height 1957 mm 77" 1957 mm 77"

E Overall length 1209 mm 47.6" 1440 mm 56.7"

Weight 475 kg 1047 lb 592 kg 1305 lb

Maximum throw distance* 13.7 m 45'0" 13.7 m 45'0"

Auger diameter 406 mm 16" 457 mm 18"

Impeller/fan diameter 517 mm 20" 679 mm 27"

Chute rotation 180° 180°

Required hydraulic flow 98-130 L/min 26-34 gpm 98-130 L/min 26-34 gpm

*Theoretical values calculated at 100% efficiency.

BA

D

C

E




15

Work Tools● Wheel Saws

Edition 44 15-109

MODELSW345B

80 mm (3")SW360B

80 mm (3")SW360B

160 mm (6")A Overall width 1850 mm 73" 1850 mm 73" 1850 mm 73"

B Wheel width 80 mm 3" 80 mm 3" 160 mm 6"


D Length 2165 mm 85" 2365 mm 93" 2365 mm 93"


Trench cleaning device No No Yes

Drive method Piston motor Piston motor Piston motor



Wheel torque @ maximum pressure 6244 N·m 4604 lb-ft 7509 N·m 5538 lb-ft 7509 N·m 5538 lb-ft

Wheel speed @ maximum flow 89 RPM 74 RPM 74 RPM

Bit speed @ maximum flow 349 m/min 1143 ft/min 360 m/min 1180 ft/min 360 m/min 1180 ft/min

Conical bits 64 per wheel 70 per wheel 96 per wheel

Standard bit type Concrete Concrete Concrete

Optional bit type All purpose All purpose All purpose


Sideshift travel 550 mm 22" 550 mm 22" 550 mm 22"

A

B D

C



15-110 Edition 44




MODELSW360B

200 mm (8")SW380B

250 mm (10")SW460B




D Length 2365 mm 93" 2490 mm 98" 2365 mm 93"


Trench cleaning device Yes No No












A

B D

C


Edition 44 15-111

15



MODELSW460B

160 mm (6")SW460B

200 mm (8")SW480B




D Length 2365 mm 93" 2365 mm 93" 2490 mm 98"


Trench cleaning device Yes Yes No












A

B D

C


15-112 Edition 44

Notes —


skid steer loader multi terrain loaders compact … · 15-2 edition 44 skid steer loaders features:...

Documents