skid steers - minnesota department of … # 727-713 tractors: skid steers attachments t-631(5) state...
TRANSCRIPT
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Price quote for: Skid Steers
Vendor Name: Ziegler Inc.
Contact Person: Jeff Schmidt
Street Address: 901 West 94th Street
P.O. Box:
City, State, Zip Bloomington, MN 55420
Phone #: 952-888-4121
Toll Free #: 800-352-2812
Fax #: 952-887-5820
Email Address: [email protected]
1997-2003
Spec # Information Requested Answer
1.0 MAKE AND MODEL Caterpillar 236D
Engine Type and SAE net HP Cat 3.3B DIT (Turbo) 73.2 HP
Tier 4 Compliant? (Y/N) Yes
Length w/o attachments 108.9"
Height with operator cab 82"
Ground clearance 7.7"
Maximum height to bucket hinge pin 122.9
Breakout force 5,074 lb
Reach at maximum height 16"
Dump angle at maximum height 48 degrees
Dump height with standard bucket 92.9"
Front clearance circle with standard bucket 83"
Rear clearance circle 64.5"
Tipping load - SAE rated 3,600 lbs.
Rated operating capacity - SAE 1,800 lbs.
Standard bucket capacity - SAE heaped rating .57 cu yd
Operating weight - SAE rated 6,559 lbs.
Travel speed 1 speed -7 mph 2-speed 10.6 mph
Fuel tank capacity 27.7 gallons
Cold weather starting assist Glow Plugs
Battery CCA 880 CCA
Alternator size - amps 80 amps
Transmission type Hydrostatic
Tire / Track size / width TIRES, 10 X 16.5 6PR GY SGL- 60"
Final drive chains and drive method #100 pre-stressed chain Direct sprocket
to chain drive
Final drive chain adjustment / maintenance 500 Hours
Gauges / instrumentation Gauges: fuel level, hour meter
Instrumentation: Engine coolant
temperature, engine oil pressure,
hydraulic oil temperature
Pump type - GPM and PSI Gear/22 GPM/3335 PSI
Control valves Hydraulic 3 section
Hydraulic oil cooler Included - air to oil
Drive controls Electro/Hydraulic - hand controls
Lift and tilt controls Electro/Hydraulic - hand controls
Engine speed control Both foot and hand control
Work lights - front Included 2 each
Version of Excel used:
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Information Requested Answer
Work lights - rear Included 2 each
Standard Warranty: Months, hours, years, etc. 1 year Unlimited hour parts/labor
BASE UNIT PRICE: $ 29,565.00
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1.0 Price for base unit: 29,565.00
2.0 Skid Steer Options:
Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab
etc.. These options should be for skid steer power unit and not attachments.
2.1 PRESSURIZED CAB, HEATER/DEFROSTER & DOOR 2,180.00$
2.2 PRESSURIZED CAB, HEATER/DEFROSTER, AIR CONDITIONING & DOOR 3,580.00$
2.3 AIR SUSPENSION SEAT-CLOTH 310.00$
2.4 AIR SUSPENSION SEAT-VINYL 290.00$
2.5 ELECTRIC WORK TOOL CONTROL 380.00$
2.6 TWO SPEED CONTROL 1,420.00$
2.7 ELECTRIC QUICK COUPLER 680.00$
2.8 BEACON LIGHT 150.00$
2.9 LIFTING EYE 4 POINT 140.00$
2.10 FOPS, LEVEL 2 2,200.00$
2.11 COUNTERWEIGHT, MACHINE EXTERNAL 710.00$
2.12 RIDE CONTROL 720.00$
2.13 ADVANCED DISPLAY 670.00$
2.14 ADVANCED DISPLAY WITH BACKUP CAMERA 950.00$
2.15 HIGH FLOW HYDRAULICS 2,930.00$
2.16 RADIO READY 110.00$
2.17 RADIO AM-FM, CD, BLUETOOTH 350.00$
2.18 PATTERN CHANGER 1,350.00$
2.19 CASE DEDICATED CONTROLS 450.00$
2.20 DUAL SELF-LEVELING -$
2.21 EXTRA HEAVY DUTY 1000 CCA BATTERY 60.00$
2.22 RETURN TO DIG/ WORKTOOL POSITIONER 200.00$
2.23 OIL, HYDRAULIC, COLD OPERATION 460.00$
2.24 PAINT, CUSTOM 880.00$
2.25 DOOR, CAB, POLYCARBONATE 150.00$
2.26 PROPORTIONAL HYDRAULICS -$
2.27 PRODUCT LINK, CELLULAR, PL421 470.00$
2.28 TIRES, 10X16.5 8PR CAT- 60" WIDTH 50.00$
2.29 TIRES, 10 X 16.5 8PR GALAXY- 60" WIDTH (150.00)$
2.30 TIRES, 10 X 16.5 6PR GY SGL- 60" WIDTH (180.00)$
2.31 TIRES, 10 X 16.5 10PR CAT, XD- 60" WIDTH 580.00$
2.32 TIRES, 31 X 6 X 10 CAT, FLXPRT- 60" WIDTH 1,520.00$
2.33 TIRES, 10X16.5 8PR CAT- 66" WIDTH 50.00$
2.34 TIRES, 10 X 16.5 10PR CAT, XD- 66" WIDTH 580.00$
2.35 TIRES, 10 X 16.5 8PR GALAXY- 66" WIDTH (150.00)$
2.36 TIRES, 31 X 6 X 10 CAT, FLXPRT- 66" WIDTH 1,520.00$
2.37 TIRES, 12 X 16.5 10PR GALAXY - 66" WIDTH 260.00$
2.38 TIRES, 12X16.5 10PR CAT- 66" WIDTH 240.00$
2.39 TIRES, 12 X 16.5 14PR CAT, XD 66" WIDTH 820.00$
3.0 Bucket Options:
Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 BUCKET-GENERAL PURPOSE, BASE EDGE 60" $861
3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" $1,042
3.3 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 60" $1,238
3.4 BUCKET-GENERAL PURPOSE, BASE EDGE 66" $1,175
3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" $1,382
3.6 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 66" $1,549
3.7 BUCKET-GENERAL PURPOSE, BASE EDGE 72" $1,275
3.8 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" $1,533
3.9 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 72" $1,630
3.10 BUCKET-GENERAL PURPOSE, BASE EDGE 78" $1,389
3.11 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" $1,624
3.12 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 78" $1,733
3.13 BUCKET-GENERAL PURPOSE, BASE EDGE 84" $1,511
3.14 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" $1,769
3.15 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 84" $1,891
3.16 BUCKET-DIRT, BOLT ON CUTTING EDGE 54" $788
3.17 BUCKET-DIRT, BOLT ON CUTTING EDGE 60" $896
3.18 BUCKET-DIRT, BOLT ON CUTTING EDGE 66" $1,077
3.19 BUCKET-DIRT, BOLT ON CUTTING EDGE 72" $1,134
3.20 BUCKET-DIRT, BOLT ON CUTTING EDGE 78" $1,250
3.21 BUCKET-LIGHT MATERIAL, BASE EDGE 72" $1,407
3.22 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" $1,630
3.23 BUCKET-LIGHT MATERIAL, BASE EDGE 78" $1,494
3.24 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" $1,733
3.25 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" $1,820
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
3.26 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" $1,981
3.27 BUCKET-MULTI-PURPOSE, BASE EDGE, 60" $3,600
3.28 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" $3,751
3.29 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" $3,965
3.30 BUCKET-MULTI-PURPOSE, BASE EDGE 66" $3,764
3.31 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" $3,931
3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" $4,133
3.33 BUCKET-MULTI-PURPOSE, BASE EDGE 72" $4,233
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" $4,425
3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" $4,597
3.36 BUCKET-MULTI-PURPOSE, BASE EDGE 78" $4,535
3.37 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" $4,724
3.38 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" $4,766
3.39 BUCKET-MULTI-PURPOSE, BASE EDGE 84" $4,854
3.40 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" $5,054
3.41 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" $5,098
3.42 BUCKET-UTILITY, BASE EDGE 60" $985
3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" $1,161
3.44 BUCKET-UTILITY, BASE EDGE 66" $1,221
3.45 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" $1,376
3.46 BUCKET-UTILITY, BASE EDGE 72" $1,407
3.47 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" $1,584
4.0 Overtire tracks:
Use this section to offer overtire tracks.
4.1
4.2
5.0 Pallet forks:
Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 FORKS, 36" PALLET W/ CARRIAGE 915.00$
5.2 FORKS, 42" PALLET W/ CARRIAGE 961.00$
5.3 FORKS, 48" PALLET W/ CARRIAGE 1,019.00$
5.4 FORKS, UTILITY, 66" 926.00$
5.5 FORKS, UTILITY, 66" 932.00$
5.6 FORKS, UTILITY, 72" 1,058.00$
5.7 FORKS, UTILITY, 72" 1,070.00$
6.0 Adaptor plate:
Use this section to offer adaptor plate options.
6.1 Universal Adapter Plate 210.00$
7.0 Snowblower:
Use this section to offer snowblower options.
7.1 SNOW BLOWER, SR117, 67" 7,280.00$
7.2 SNOW BLOWER, SR118, 73" 8,077.00$
7.3 SNOW BLOWER, SR121, 85" 8,438.00$
7.4 SNOW BLOWER, SR318, 73" XPS REQUIRED 8,720.00$
7.5 SNOW BLOWER, SR321, 85" XPS REQUIRED 9,263.00$
8.0 Sweeper:
Use this section to offer sweeper options.
8.1 BROOM, MANUAL ANGLE, BA18 $6,574
8.2 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.3 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.4 KIT, WATER SPRINKLER $790
8.5 KIT, DEFLECTOR $424
8.6 BROOM, PICKUP, BP15B $6,152
8.7 BROOM, PICKUP, BP18B $7,033
8.8 BRACKET, BROOM B & C SERIES FOR BP BROOMS $239
8.9 BROOM, UTILITY, BU115 $4,407
8.10 BROOM, UTILITY, BU118 $4,790
8.11 BRUSH, GUTTER, B-SERIES $2,356
8.12 MOUNTING BRACKET, NOZZLE Kit of 4 $200
8.13 KIT, WATER SPRINKLER FOR BP BROOMS $209
8.14 KIT, WATER TANK, BROOM FOR BU BROOMS $758
8.15 KIT, WATER SPRINKLER FOR BA18 $790
9.0 Backhoe:
Use this section to offer backhoe options.
9.1 BACKHOE, BH150 $14,988
9.2 BACKHOE, BH160 W/ AUXILIARY $16,187
9.3 GROUP, BACKHOE MOUNTING $1,375
9.4 BUCKET-DIG, 10" $653
9.5 BUCKET-DIG, 12" $588
9.6 BUCKET-DIG, 16" $617
9.7 BUCKET-DIG, 18" $619
9.8 BUCKET-DIG, 20" $692
9.9 BUCKET-DIG, 24" $730
9.10 BUCKET-DC, 32" $780
9.11 BUCKET-DC, 40" $809
9.12 BUCKET-DC, 47" $904
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
9.13 PINS, BUCKET $91
9.14 BUCKET, 12", 1.7 CFT, HD $810
9.15 BUCKET, 16", 2.5 CFT, HD $844
9.16 BUCKET, 18", 2.9 CFT, HD $905
9.17 BUCKET, 20", 3.3 CFT, HD $961
9.18 BUCKET, 24", 4.2 CFT, HD $1,015
9.19 BUCKET, 30", 5.6 CFT, HD $1,171
9.20 BUCKET-DC, 40" $955
9.21 BUCKET-DC, 47" $973
9.22 BUCKET-DC, 55" $1,070
9.23 PINS,BUCKET $113
9.24 GUARD, OP PROTECTION MESH $556
9.25 A14B AUGER, DRIVE UNIT $2,255
9.26 A19B AUGER, DRIVE UNIT $2,822
9.27 EXTENSION, AUGER 12" $140
9.28 EXTENSION, AUGER 24" $187
9.29 BUCKET - TILTING, DC, 47" $3,140
9.30 CVP16 COMULTI-PURPOSEACTOR PLATE $5,142
9.31 BLADE, BACKFILL $658
9.32 BRACKET, MOUNTING $752
9.33 BRACKET, SWIVEL $1,182
9.34 LINES, CONNECTOR $568
9.35 COUPLER, PG, MANUAL, DUAL LOCK $1,222
10.0 Planer:
Use this section to offer planer options.
10.1 COLD PLANER, PC104B $11,683
10.2 COLD PLANER, PC203 $12,233
10.3 COLD PLANER PC205B $14,720
10.4 COLD PLANER, PC205 $16,149
10.5 COLD PLANER, PC306B REQUIRES XPS HYDRAULICS $20,516
10.6 COLD PLANER, PC310B REQUIRES XPS HYDRAULICS $26,891
10.7 COLD PLANER, PC408B REQUIRES XHP HYDRAULICS $22,712
10.8 COLD PLANER, PC412B REQUIRES XHP HYDRAULICS $29,179
10.9 KIT, WATER SPRINKLER $267
11.0 Snow Plow:
Use this section to offer snow plow options.
11.1 ANGLE BLADE, 72" $2,830
11.2 ANGLE BLADE, 84" $3,016
11.3 KIT, SNOW AND IMULTI-PURPOSEACT, 72" $553
11.4 KIT, SNOW AND IMULTI-PURPOSEACT, 84" $553
11.5 SNOW PUSH, SSL, STD DTY 8' $7,260
11.6 SNOW PUSH, SSL, STD DTY 10' $7,985
11.7 SNOW PUSH, SSL, STD DTY 12' $8,494
11.8 SNOW PUSH, SSL, STD DTY 15' $8,965
12.0 Hydraulic breaker:
Use this section to offer hydraulic breaker options.
12.1 H55E HAMMER WITH SSL MOUNTS 11,330.00$
12.2 H65E HAMMER WITH SSL MOUNTS 15,200.00$
13.0 Grapple:
Use this section to offer grapple options.
13.1 FORKS, INDUSTRIAL GRAPPLE, 66" $5,420
13.2 FORKS, INDUSTRIAL GRAPPLE, 72" $6,467
13.3 FORKS, UTILITY GRAPPLE, 66" $2,273
13.4 FORKS, UTILITY GRAPPLE, 72" $2,411
13.5 BUCKET, INDUSTRIAL GRAPPLE, 60" BASE $3,944
13.6 BUCKET, INDUSTRIAL GRAPPLE, 60" BOLT ON CUTTING EDGE $4,107
13.7 BUCKET, INDUSTRIAL GRAPPLE, 66" BASE $4,137
13.8 BUCKET, INDUSTRIAL GRAPPLE, 66" BOLT ON CUTTING EDGE $4,309
13.9 BUCKET, INDUSTRIAL GRAPPLE, 72" BASE $4,625
13.10 BUCKET, INDUSTRIAL GRAPPLE, 72" BOLT ON CUTTING EDGE $4,824
13.11 BUCKET, INDUSTRIAL GRAPPLE 78" BASE $5,114
13.12 BUCKET, INDUSTRIAL GRAPPLE, 78" BOLT ON CUTTING EDGE $5,306
13.13 RAKE, INDUSTRIAL GRAPPLE, 72" $3,660
13.14 RAKE, INDUSTRIAL GRAPPLE, 84" $4,098
13.15 BUCKET, UTILITY GRAPPLE, 66" $2,810
13.16 BUCKET, UTILITY GRAPPLE 72" $3,034
13.17 UTILITY GRAPPLE $1,215
14.0 Landscape:
Use this section to offer landscape options.
14.1 BRUSHCUTTER, BR160, 60" $5,483
14.2 BRUSHCUTTER, BR166, 66" $5,738
14.3 BRUSHCUTTER, BR172, 72" $5,992
14.4 BRUSHCUTTER, BR272, 72" HF $6,248
14.5 BRUSHCUTTER, BR272, 72" HF $6,248
14.6 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.7 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.8 LANDSCAPE RAKE, LR15B $7,142
14.9 LANDSCAPE RAKE, LR18B $7,779
14.10 LANDSCAPE TILLER, LT13B $5,470
14.11 LANDSCAPE TILLER, LT18B $6,584
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
14.12 MULCHER, HM312, CARBIDE TEETH REQUIRES XPS $20,629
14.13 MULCHER, HM315B, CARBIDE TEETH REQUIRES XPS $30,545
14.14 MULCHER, HM415B, CARBIDE TEETH REQUIRES XHP $31,933
14.15 GUARD, MANUAL COUPLER $52
14.16 POWER BOX RAKE-HYDRAULIC,PR172 $9,408
14.17 POWER BOX RAKE-HYDRAULIC,PR172 $9,406
14.18 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.19 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.20 POWER BOX RAKE-HYDRAULIC,PR190 $10,727
14.21 POWER BOX RAKE-HYDRAULIC,PR190 $10,726
14.22 POWER BOX RAKE-MANUAL, PR172 $9,019
14.23 POWER BOX RAKE-MANUAL, PR184 $9,335
14.24 STUMP GRINDER, SG16B $7,759
14.25 STUMP GRINDER, SG16B $7,763
14.26 STUMP GRINDER, SG18B $8,610
14.27 TRENCHER, T6B, MANUAL,NO CHAIN $4,264
14.28 TRENCHER,T6B, MAN. 6" STANDARD $4,754
14.29 TRENCHER,T6B, MAN. 8" STD $4,873
14.30 TRENCHER, T6B, MAN. 6" COMBO $4,995
14.31 TRENCHER, T6B,MAN 6" ROCKFROST $5,237
14.32 TRENCHER,T6B, MAN 6"TERMINATOR $5,484
14.33 TRENCHER, T6B, HYD, NO CHAIN $4,863
14.34 TRENCHER, T6B,HYD. 6" STANDARD $5,350
14.35 TRENCHER, T6B, HYD. 8" STD $5,470
14.36 TRENCHER, T6B, HYD 6" COMBO $5,592
14.37 TRENCHER, T6B,HYD 6" ROCKFROST $5,837
14.38 TRENCHER,T6B, HYD 6"TERMINATOR $6,080
14.39 TRENCHER, T9B, MANUAL,NO CHAIN $4,593
14.40 TRENCHER, T9B,MAN. 6" STANDARD $4,900
14.41 TRENCHER, T9B, MAN. 6" COMBO $6,539
14.42 TRENCHER, T9B,MAN 6" ROCKFROST $7,085
14.43 TRENCHER, T9B, HYD, NO CHAIN $5,205
14.44 TRENCHER, T9B,HYD. 6" STANDARD $5,430
14.45 TRENCHER, T9B, HYD. 8" STD. $6,143
14.46 TRENCHER, T9B, HYD. 6" COMBO $7,152
14.47 TRENCHER, T9B,HYD 6" ROCKFROST $7,525
14.48 TRENCHER, T15B, HF, NO CHAIN $7,680
14.49 TRENCHER, T15B, HF 6" STANDARD $8,440
14.50 TRENCHER, T15B, HF 8" STD. $9,720
14.51 TRENCHER, T15B, HF COMBO $11,475
14.52 CRUMBER ARM 36" $264
14.53 CRUMBER ARM 48" $293
14.54 CRUMBER ARM 60" $266
14.55 SHOE, CRUMBER ARM 6" - 8" $94
14.56 SHOE, CRUMBER ARM 10" - 12" $102
15.0 Grader:
Use this section to offer grader options.
15.1 BLADE, DOZER, 6-WAY, 79" $5,924
15.2 BLADE, DOZER, 6-WAY, 79" $5,924
15.3 BLADE, DOZER, 6-WAY, 92" $6,508
15.4 BLADE, DOZER, 6-WAY, 92" $6,508
16.0 Auger:
Use this section to offer auger options.
16.1 AUGER, A14B $2,218
16.2 AUGER, A19B $2,632
16.3 AUGER, A26B, HF $4,204
16.4 AUGER, A26B, HF $4,204
16.5 BIT, AUGER 6" $283
16.6 BIT, AUGER 9" $453
16.7 BIT, AUGER 12" $554
16.8 BIT, AUGER 15" STANDARD $637
16.9 BIT, AUGER 18" $734
16.10 BIT, AUGER 24" $919
16.11 BIT, AUGER 30" $1,026
16.12 BIT, AUGER 36" $1,427
16.13 BIT, AUGER 6" INDUSTRIAL $447
16.14 BIT, AUGER 9" INDUSTRIAL $531
16.15 BIT, AUGER 12" INDUSTRIAL $605
16.16 BIT, AUGER 16" INDUSTRIAL $891
16.17 BIT, AUGER 18" INDUSTRIAL $917
16.18 BIT, AUGER 24" INDUSTRIAL $1,209
16.19 TREE BIT, AUGER 24" $838
16.20 TREE BIT, AUGER 36" $1,312
16.21 ROCK HEAD, 6" BOLT-ON $255
16.22 ROCK HEAD, 9" BOLT-ON $320
16.23 ROCK DRILL HEAD, 12" STANDARD $383
16.24 ROCK HEAD, 15" BOLT-ON $447
16.25 ROCK DRILL HEAD, 18" STANDARD $510
16.26 ROCK DRILL HEAD, 24" STANDARD $669
16.27 ADAPTER, AUGER - HEX TO ROUND $157
16.28 ADAPTER, AUGER - ROUND TO HEX $134
16.29 EXTENSION, TELESCOPING 3' $320
16.30 EXTENSION, TELESCOPING 6' $541
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
16.31 EXTENSION, AUGER 12" $140
16.32 EXTENSION, AUGER 24" $187
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WHEEL SAW, SW45, 8" $24,522
17.2 WHEEL SAW, SW60, 6" $27,527
17.3 WHEEL SAW, SW345B, 3" $22,599
17.4 WHEEL SAW, SW360B, 3" $25,376
17.5 WHEEL SAW, SW360B, 6" $27,144
17.6 WHEEL SAW, SW360B, 8" $29,336
17.7 WHEEL SAW, SW460B, 3" $32,209
17.8 WHEEL SAW, SW460B, 6" $32,849
17.9 WHEEL SAW, SW460B, 8" $34,220
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 VIBRATORY COMPACTOR, CV16B $11,064
18.2 VIBRATORY COMPACTOR, CV18B $11,864
19.0 Other:Use this section to offer any other option not already covered.
19.1 KIT KL - WKTL CVRSN TO 3-LINES $136
19.2 KIT KN - WKTL CVRSN TO 3-LINES $136
19.3 KIT KP - WKTL CVRSN TO 3-LINES $136
19.4 KIT, W/T CONV, PLANER & SAW $1,389
19.5 KIT KX - WKTL CVRSN TO 3-LINES $1,705
19.6 KIT KY - WKTL CVRSN TO 3-LINES $1,688
19.7 KIT KZ - WKTL CVRSN TO 3-LINES $1,894
19.8 KIT KS - WKTL CVRSN TO 5-LINES $316
19.9 KIT KA - WKTL CVRSN TO XHP $136
19.10 KIT KB - WKTL CVRSN TO XHP $200
19.11 KIT KC - WKTL CVRSN TO XHP $200
19.12 KIT KD - WKTL CVRSN TO XHP $200
19.13 KIT KE - WKTL CVRSN TO XHP $253
19.14 KIT KF - WKTL CVRSN TO XHP $139
19.15 KIT KG - WKTL CVRSN TO XHP $253
19.16 KIT KH - WKTL CVRSN TO XHP $253
19.17 KIT KJ - WKTL CVRSN TO XHP $253
19.18 KIT KK - WKTL CVRSN TO XHP $253
19.19 KIT KM - WKTL CVRSN TO XHP $136
19.20 KIT KR - WKTL CVRSN TO XHP $136
19.21 TANK, WATER, B-SERIES MACHINES $1,617
19.22 TANK, WATER $1,617
19.23 ARM, MATERIAL HANDLING $1,536
19.24 S305 HYDRAULIC SCRAP SHEAR $31,268
20.0 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options,(Specify years, miles or hours extended term covers.)
20.1 2 YEAR/2000 HOUR Powertrain 590.00$
20.2 2 YEAR/2000 HOUR Powertrain + Hydraulics 800.00$
20.3 2 YEAR/2000 HOUR Premier 1,150.00$
20.4 3 YEAR/3000 HOUR Powertrain 1,570.00$
20.5 3 YEAR/3000 HOUR Powertrain + Hydraulics 2,120.00$
20.6 3 YEAR/3000 HOUR Premier 3,040.00$
20.7 4 YEAR/4000 HOUR Powertrain 2,490.00$
20.8 5 YEAR/5000 HOUR Powertrain 3,930.00$
20.9 *does not include travel charges
20.10 *see attached warranty statement
21.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment
Hourly Rental Rate: $20.00Weekly Rental Rate: $330.00
Monthly Rental Rate: $990.00 Percent (%) of Rental Fee applied to purchase price: 85%
If the new rental equipment is purchased and financed
Charges are applicable for the actual rental term only.State the actual interest rate here: ________________
22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM(See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price $11.00
23.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 0% (See Special Terms and Conditions)
24.0 DELIVERY STARTING POINT - City, State, Zip Nearest Ziegler Location (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $2.50
25.0 INSTALLATION - PER HOUR (Hourly Shop Rate):Installation services may be requested on an "as needed" basis - see Special Terms and Conditions.) 118.00$
26.0 PRICE FOR SERVICE MANUAL 680.00$
27.0 PRICE FOR PARTS MANUAL 65.00$
28.0 PRICE FOR OPERATIONS MANUAL 65.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Price quote for: Skid Steers
Vendor Name: Ziegler Inc.
Contact Person: Jeff Schmidt
Street Address: 901 West 94th Street
P.O. Box:
City, State, Zip Bloomington, MN 55420
Phone #: 952-888-4121
Toll Free #: 800-352-2812
Fax #: 952-887-5820
Email Address: [email protected]
1997-2003
Spec # Information Requested Answer
1.0 MAKE AND MODEL Caterpillar 242D
Engine Type and SAE net HP Cat 3.3B DIT (Turbo) 73.2 HP
Tier 4 Compliant? (Y/N) Yes
Length w/o attachments 108.9"
Height with operator cab 83.1"
Ground clearance 8.7"
Maximum height to bucket hinge pin 121.1"
Breakout force 5,034 lb
Reach at maximum height 21.7"
Dump angle at maximum height 52 degrees
Dump height with standard bucket 90"
Front clearance circle with standard bucket 83"
Rear clearance circle 64.5"
Tipping load - SAE rated 4,300 lbs.
Rated operating capacity - SAE 2,150 lbs.
Standard bucket capacity - SAE heaped rating .57 cu yd
Operating weight - SAE rated 6,980 lbs.
Travel speed 1 speed -7.5 mph 2-speed 11.5 mph
Fuel tank capacity 27.7 gallons
Cold weather starting assist Glow Plugs
Battery CCA 880 CCA
Alternator size - amps 80 amps
Transmission type Hydrostatic
Tire / Track size / width TIRES, 10 X 16.5 6PR GY SGL- 60"
Final drive chains and drive method #100 pre-stressed chain Direct sprocket
to chain drive
Final drive chain adjustment / maintenance 500 Hours
Gauges / instrumentation Gauges: fuel level, hour meter
Instrumentation: Engine coolant
temperature, engine oil pressure,
hydraulic oil temperature
Pump type - GPM and PSI Gear/22 GPM/3335 PSI
Control valves Hydraulic 3 section
Hydraulic oil cooler Included - air to oil
Drive controls Electro/Hydraulic - hand controls
Lift and tilt controls Electro/Hydraulic - hand controls
Engine speed control Both foot and hand control
Work lights - front Included 2 each
Version of Excel used:
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Information Requested Answer
Work lights - rear Included 2 each
Standard Warranty: Months, hours, years, etc. 1 year Unlimited hour parts/labor
BASE UNIT PRICE: $ 32,020.00
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1.0 Price for base unit: 32,020.00$
2.0 Skid Steer Options:
Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab
etc.. These options should be for skid steer power unit and not attachments.
2.1 PRESSURIZED CAB, HEATER/DEFROSTER & DOOR 2,180.00$
2.2 PRESSURIZED CAB, HEATER/DEFROSTER, AIR CONDITIONING & DOOR 3,580.00$
2.3 AIR SUSPENSION SEAT-CLOTH 310.00$
2.4 AIR SUSPENSION SEAT-VINYL 290.00$
2.5 ELECTRIC WORK TOOL CONTROL 380.00$
2.6 TWO SPEED CONTROL 1,420.00$
2.7 ELECTRIC QUICK COUPLER 680.00$
2.8 BEACON LIGHT 150.00$
2.9 LIFTING EYE 4 POINT 140.00$
2.10 FOPS, LEVEL 2 2,200.00$
2.11 COUNTERWEIGHT, MACHINE EXTERNAL 710.00$
2.12 RIDE CONTROL 720.00$
2.13 ADVANCED DISPLAY 670.00$
2.14 ADVANCED DISPLAY WITH BACKUP CAMERA 950.00$
2.15 HIGH FLOW HYDRAULICS 2,930.00$
2.16 RADIO READY 110.00$
2.17 RADIO AM-FM, CD, BLUETOOTH 350.00$
2.18 PATTERN CHANGER 1,350.00$
2.19 CASE DEDICATED CONTROLS 450.00$
2.20 DUAL SELF-LEVELING -$
2.21 EXTRA HEAVY DUTY 1000 CCA BATTERY 60.00$
2.22 RETURN TO DIG/ WORKTOOL POSITIONER 200.00$
2.23 OIL, HYDRAULIC, COLD OPERATION 460.00$
2.24 PAINT, CUSTOM 880.00$
2.25 DOOR, CAB, POLYCARBONATE 150.00$
2.26 PROPORTIONAL HYDRAULICS -$
2.27 PRODUCT LINK, CELLULAR, PL421 470.00$
2.28 TIRES, 10 X 16.5 8PR GALAXY- 60" WIDTH (150.00)$
2.29 TIRES, 10 X 16.5 6PR GY SGL- 60" WIDTH (180.00)$
2.30 TIRES, 10 X 16.5 10PR CAT, XD- 60" WIDTH 580.00$
2.31 TIRES, 31 X 6 X 10 CAT, FLXPRT- 60" WIDTH 1,520.00$
2.32 TIRES, 10X16.5 8PR CAT- 66" WIDTH 50.00$
2.33 TIRES, 10 X 16.5 10PR CAT, XD- 66" WIDTH 580.00$
2.34 TIRES, 10 X 16.5 8PR GALAXY- 66" WIDTH (150.00)$
2.35 TIRES, 31 X 6 X 10 CAT, FLXPRT- 66" WIDTH 1,520.00$
2.36 TIRES, 12 X 16.5 10PR GALAXY - 66" WIDTH 260.00$
2.37 TIRES, 12X16.5 10PR CAT- 66" WIDTH 240.00$
2.38 TIRES, 12 X 16.5 14PR CAT, XD 66" WIDTH 820.00$
3.0 Bucket Options:
Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 BUCKET-GENERAL PURPOSE, BASE EDGE 60" $861
3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" $1,042
3.3 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 60" $1,238
3.4 BUCKET-GENERAL PURPOSE, BASE EDGE 66" $1,175
3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" $1,382
3.6 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 66" $1,549
3.7 BUCKET-GENERAL PURPOSE, BASE EDGE 72" $1,275
3.8 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" $1,533
3.9 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 72" $1,630
3.10 BUCKET-GENERAL PURPOSE, BASE EDGE 78" $1,389
3.11 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" $1,624
3.12 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 78" $1,733
3.13 BUCKET-GENERAL PURPOSE, BASE EDGE 84" $1,511
3.14 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" $1,769
3.15 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 84" $1,891
3.16 BUCKET-DIRT, BOLT ON CUTTING EDGE 54" $788
3.17 BUCKET-DIRT, BOLT ON CUTTING EDGE 60" $896
3.18 BUCKET-DIRT, BOLT ON CUTTING EDGE 66" $1,077
3.19 BUCKET-DIRT, BOLT ON CUTTING EDGE 72" $1,134
3.20 BUCKET-DIRT, BOLT ON CUTTING EDGE 78" $1,250
3.21 BUCKET-LIGHT MATERIAL, BASE EDGE 72" $1,407
3.22 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" $1,630
3.23 BUCKET-LIGHT MATERIAL, BASE EDGE 78" $1,494
3.24 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" $1,733
3.25 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" $1,820
3.26 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" $1,981
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
3.27 BUCKET-MULTI-PURPOSE, BASE EDGE, 60" $3,600
3.28 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" $3,751
3.29 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" $3,965
3.30 BUCKET-MULTI-PURPOSE, BASE EDGE 66" $3,764
3.31 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" $3,931
3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" $4,133
3.33 BUCKET-MULTI-PURPOSE, BASE EDGE 72" $4,233
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" $4,425
3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" $4,597
3.36 BUCKET-MULTI-PURPOSE, BASE EDGE 78" $4,535
3.37 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" $4,724
3.38 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" $4,766
3.39 BUCKET-MULTI-PURPOSE, BASE EDGE 84" $4,854
3.40 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" $5,054
3.41 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" $5,098
3.42 BUCKET-UTILITY, BASE EDGE 60" $985
3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" $1,161
3.44 BUCKET-UTILITY, BASE EDGE 66" $1,221
3.45 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" $1,376
3.46 BUCKET-UTILITY, BASE EDGE 72" $1,407
3.47 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" $1,584
4.0 Overtire tracks:
Use this section to offer overtire tracks.
4.1
4.2
5.0 Pallet forks:
Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 FORKS, 36" PALLET W/ CARRIAGE 915.00$
5.2 FORKS, 42" PALLET W/ CARRIAGE 961.00$
5.3 FORKS, 48" PALLET W/ CARRIAGE 1,019.00$
5.4 FORKS, UTILITY, 66" 926.00$
5.5 FORKS, UTILITY, 66" 932.00$
5.6 FORKS, UTILITY, 72" 1,058.00$
5.7 FORKS, UTILITY, 72" 1,070.00$
6.0 Adaptor plate:
Use this section to offer adaptor plate options.
6.1 Universal Adapter Plate 210.00$
7.0 Snowblower:
Use this section to offer snowblower options.
7.1 SNOW BLOWER, SR117, 67" 7,280.00$
7.2 SNOW BLOWER, SR118, 73" 8,077.00$
7.3 SNOW BLOWER, SR121, 85" 8,438.00$
7.4 SNOW BLOWER, SR318, 73" XPS REQUIRED 8,720.00$
7.5 SNOW BLOWER, SR321, 85" XPS REQUIRED 9,263.00$
8.0 Sweeper:
Use this section to offer sweeper options.
8.1 BROOM, MANUAL ANGLE, BA18 $6,574
8.2 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.3 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.4 KIT, WATER SPRINKLER $790
8.5 KIT, DEFLECTOR $424
8.6 BROOM, PICKUP, BP15B $6,152
8.7 BROOM, PICKUP, BP18B $7,033
8.8 BRACKET, BROOM B & C SERIES FOR BP BROOMS $239
8.9 BROOM, UTILITY, BU115 $4,407
8.10 BROOM, UTILITY, BU118 $4,790
8.11 BRUSH, GUTTER, B-SERIES $2,356
8.12 MOUNTING BRACKET, NOZZLE Kit of 4 $200
8.13 KIT, WATER SPRINKLER FOR BP BROOMS $209
8.14 KIT, WATER TANK, BROOM FOR BU BROOMS $758
8.15 KIT, WATER SPRINKLER FOR BA18 $790
9.0 Backhoe:
Use this section to offer backhoe options.
9.1 BACKHOE, BH150 $14,988
9.2 BACKHOE, BH160 W/ AUXILIARY $16,187
9.3 GROUP, BACKHOE MOUNTING $1,375
9.4 BUCKET-DIG, 10" $653
9.5 BUCKET-DIG, 12" $588
9.6 BUCKET-DIG, 16" $617
9.7 BUCKET-DIG, 18" $619
9.8 BUCKET-DIG, 20" $692
9.9 BUCKET-DIG, 24" $730
9.10 BUCKET-DC, 32" $780
9.11 BUCKET-DC, 40" $809
9.12 BUCKET-DC, 47" $904
9.13 PINS, BUCKET $91
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
9.14 BUCKET, 12", 1.7 CFT, HD $810
9.15 BUCKET, 16", 2.5 CFT, HD $844
9.16 BUCKET, 18", 2.9 CFT, HD $905
9.17 BUCKET, 20", 3.3 CFT, HD $961
9.18 BUCKET, 24", 4.2 CFT, HD $1,015
9.19 BUCKET, 30", 5.6 CFT, HD $1,171
9.20 BUCKET-DC, 40" $955
9.21 BUCKET-DC, 47" $973
9.22 BUCKET-DC, 55" $1,070
9.23 PINS,BUCKET $113
9.24 GUARD, OP PROTECTION MESH $556
9.25 A14B AUGER, DRIVE UNIT $2,255
9.26 A19B AUGER, DRIVE UNIT $2,822
9.27 EXTENSION, AUGER 12" $140
9.28 EXTENSION, AUGER 24" $187
9.29 BUCKET - TILTING, DC, 47" $3,140
9.30 CVP16 COMULTI-PURPOSEACTOR PLATE $5,142
9.31 BLADE, BACKFILL $658
9.32 BRACKET, MOUNTING $752
9.33 BRACKET, SWIVEL $1,182
9.34 LINES, CONNECTOR $568
9.35 COUPLER, PG, MANUAL, DUAL LOCK $1,222
10.0 Planer:
Use this section to offer planer options.
10.1 COLD PLANER, PC104B $11,683
10.2 COLD PLANER, PC203 $12,233
10.3 COLD PLANER PC205B $14,720
10.4 COLD PLANER, PC205 $16,149
10.5 COLD PLANER, PC306B REQUIRES XPS HYDRAULICS $20,516
10.6 COLD PLANER, PC310B REQUIRES XPS HYDRAULICS $26,891
10.7 COLD PLANER, PC408B REQUIRES XHP HYDRAULICS $22,712
10.8 COLD PLANER, PC412B REQUIRES XHP HYDRAULICS $29,179
10.9 KIT, WATER SPRINKLER $267
11.0 Snow Plow:
Use this section to offer snow plow options.
11.1 ANGLE BLADE, 72" $2,830
11.2 ANGLE BLADE, 84" $3,016
11.3 KIT, SNOW AND IMULTI-PURPOSEACT, 72" $553
11.4 KIT, SNOW AND IMULTI-PURPOSEACT, 84" $553
11.5 SNOW PUSH, SSL, STD DTY 8' $7,260
11.6 SNOW PUSH, SSL, STD DTY 10' $7,985
11.7 SNOW PUSH, SSL, STD DTY 12' $8,494
11.8 SNOW PUSH, SSL, STD DTY 15' $8,965
12.0 Hydraulic breaker:
Use this section to offer hydraulic breaker options.
12.1 H55E HAMMER WITH SSL MOUNTS 11,330.00$
12.2 H65E HAMMER WITH SSL MOUNTS 15,200.00$
13.0 Grapple:
Use this section to offer grapple options.
13.1 FORKS, INDUSTRIAL GRAPPLE, 66" $5,420
13.2 FORKS, INDUSTRIAL GRAPPLE, 72" $6,467
13.3 FORKS, UTILITY GRAPPLE, 66" $2,273
13.4 FORKS, UTILITY GRAPPLE, 72" $2,411
13.5 BUCKET, INDUSTRIAL GRAPPLE, 60" BASE $3,944
13.6 BUCKET, INDUSTRIAL GRAPPLE, 60" BOLT ON CUTTING EDGE $4,107
13.7 BUCKET, INDUSTRIAL GRAPPLE, 66" BASE $4,137
13.8 BUCKET, INDUSTRIAL GRAPPLE, 66" BOLT ON CUTTING EDGE $4,309
13.9 BUCKET, INDUSTRIAL GRAPPLE, 72" BASE $4,625
13.10 BUCKET, INDUSTRIAL GRAPPLE, 72" BOLT ON CUTTING EDGE $4,824
13.11 BUCKET, INDUSTRIAL GRAPPLE 78" BASE $5,114
13.12 BUCKET, INDUSTRIAL GRAPPLE, 78" BOLT ON CUTTING EDGE $5,306
13.13 RAKE, INDUSTRIAL GRAPPLE, 72" $3,660
13.14 RAKE, INDUSTRIAL GRAPPLE, 84" $4,098
13.15 BUCKET, UTILITY GRAPPLE, 66" $2,810
13.16 BUCKET, UTILITY GRAPPLE 72" $3,034
13.17 UTILITY GRAPPLE $1,215
14.0 Landscape:
Use this section to offer landscape options.
14.1 BRUSHCUTTER, BR160, 60" $5,483
14.2 BRUSHCUTTER, BR166, 66" $5,738
14.3 BRUSHCUTTER, BR172, 72" $5,992
14.4 BRUSHCUTTER, BR272, 72" HF $6,248
14.5 BRUSHCUTTER, BR272, 72" HF $6,248
14.6 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.7 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.8 LANDSCAPE RAKE, LR15B $7,142
14.9 LANDSCAPE RAKE, LR18B $7,779
14.10 LANDSCAPE TILLER, LT13B $5,470
14.11 LANDSCAPE TILLER, LT18B $6,584
14.12 MULCHER, HM312, CARBIDE TEETH REQUIRES XPS $20,629
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
14.13 MULCHER, HM315B, CARBIDE TEETH REQUIRES XPS $30,545
14.14 MULCHER, HM415B, CARBIDE TEETH REQUIRES XHP $31,933
14.15 GUARD, MANUAL COUPLER $52
14.16 POWER BOX RAKE-HYDRAULIC,PR172 $9,408
14.17 POWER BOX RAKE-HYDRAULIC,PR172 $9,406
14.18 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.19 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.20 POWER BOX RAKE-HYDRAULIC,PR190 $10,727
14.21 POWER BOX RAKE-HYDRAULIC,PR190 $10,726
14.22 POWER BOX RAKE-MANUAL, PR172 $9,019
14.23 POWER BOX RAKE-MANUAL, PR184 $9,335
14.24 STUMP GRINDER, SG16B $7,759
14.25 STUMP GRINDER, SG16B $7,763
14.26 STUMP GRINDER, SG18B $8,610
14.27 TRENCHER, T6B, MANUAL,NO CHAIN $4,264
14.28 TRENCHER,T6B, MAN. 6" STANDARD $4,754
14.29 TRENCHER,T6B, MAN. 8" STD $4,873
14.30 TRENCHER, T6B, MAN. 6" COMBO $4,995
14.31 TRENCHER, T6B,MAN 6" ROCKFROST $5,237
14.32 TRENCHER,T6B, MAN 6"TERMINATOR $5,484
14.33 TRENCHER, T6B, HYD, NO CHAIN $4,863
14.34 TRENCHER, T6B,HYD. 6" STANDARD $5,350
14.35 TRENCHER, T6B, HYD. 8" STD $5,470
14.36 TRENCHER, T6B, HYD 6" COMBO $5,592
14.37 TRENCHER, T6B,HYD 6" ROCKFROST $5,837
14.38 TRENCHER,T6B, HYD 6"TERMINATOR $6,080
14.39 TRENCHER, T9B, MANUAL,NO CHAIN $4,593
14.40 TRENCHER, T9B,MAN. 6" STANDARD $4,900
14.41 TRENCHER, T9B, MAN. 6" COMBO $6,539
14.42 TRENCHER, T9B,MAN 6" ROCKFROST $7,085
14.43 TRENCHER, T9B, HYD, NO CHAIN $5,205
14.44 TRENCHER, T9B,HYD. 6" STANDARD $5,430
14.45 TRENCHER, T9B, HYD. 8" STD. $6,143
14.46 TRENCHER, T9B, HYD. 6" COMBO $7,152
14.47 TRENCHER, T9B,HYD 6" ROCKFROST $7,525
14.48 TRENCHER, T15B, HF, NO CHAIN $7,680
14.49 TRENCHER, T15B, HF 6" STANDARD $8,440
14.50 TRENCHER, T15B, HF 8" STD. $9,720
14.51 TRENCHER, T15B, HF COMBO $11,475
14.52 CRUMBER ARM 36" $264
14.53 CRUMBER ARM 48" $293
14.54 CRUMBER ARM 60" $266
14.55 SHOE, CRUMBER ARM 6" - 8" $94
14.56 SHOE, CRUMBER ARM 10" - 12" $102
15.0 Grader:
Use this section to offer grader options.
15.1 BLADE, DOZER, 6-WAY, 79" $5,924
15.2 BLADE, DOZER, 6-WAY, 79" $5,924
15.3 BLADE, DOZER, 6-WAY, 92" $6,508
15.4 BLADE, DOZER, 6-WAY, 92" $6,508
16.0 Auger:
Use this section to offer auger options.
16.1 AUGER, A14B $2,218
16.2 AUGER, A19B $2,632
16.3 AUGER, A26B, HF $4,204
16.4 AUGER, A26B, HF $4,204
16.5 BIT, AUGER 6" $283
16.6 BIT, AUGER 9" $453
16.7 BIT, AUGER 12" $554
16.8 BIT, AUGER 15" STANDARD $637
16.9 BIT, AUGER 18" $734
16.10 BIT, AUGER 24" $919
16.11 BIT, AUGER 30" $1,026
16.12 BIT, AUGER 36" $1,427
16.13 BIT, AUGER 6" INDUSTRIAL $447
16.14 BIT, AUGER 9" INDUSTRIAL $531
16.15 BIT, AUGER 12" INDUSTRIAL $605
16.16 BIT, AUGER 16" INDUSTRIAL $891
16.17 BIT, AUGER 18" INDUSTRIAL $917
16.18 BIT, AUGER 24" INDUSTRIAL $1,209
16.19 TREE BIT, AUGER 24" $838
16.20 TREE BIT, AUGER 36" $1,312
16.21 ROCK HEAD, 6" BOLT-ON $255
16.22 ROCK HEAD, 9" BOLT-ON $320
16.23 ROCK DRILL HEAD, 12" STANDARD $383
16.24 ROCK HEAD, 15" BOLT-ON $447
16.25 ROCK DRILL HEAD, 18" STANDARD $510
16.26 ROCK DRILL HEAD, 24" STANDARD $669
16.27 ADAPTER, AUGER - HEX TO ROUND $157
16.28 ADAPTER, AUGER - ROUND TO HEX $134
16.29 EXTENSION, TELESCOPING 3' $320
16.30 EXTENSION, TELESCOPING 6' $541
16.31 EXTENSION, AUGER 12" $140
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
16.32 EXTENSION, AUGER 24" $187
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WHEEL SAW, SW45, 8" $24,522
17.2 WHEEL SAW, SW60, 6" $27,527
17.3 WHEEL SAW, SW345B, 3" $22,599
17.4 WHEEL SAW, SW360B, 3" $25,376
17.5 WHEEL SAW, SW360B, 6" $27,144
17.6 WHEEL SAW, SW360B, 8" $29,336
17.7 WHEEL SAW, SW460B, 3" $32,209
17.8 WHEEL SAW, SW460B, 6" $32,849
17.9 WHEEL SAW, SW460B, 8" $34,220
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 VIBRATORY COMPACTOR, CV16B $11,064
18.2 VIBRATORY COMPACTOR, CV18B $11,864
19.0 Other:Use this section to offer any other option not already covered.
19.1 KIT KL - WKTL CVRSN TO 3-LINES $136
19.2 KIT KN - WKTL CVRSN TO 3-LINES $136
19.3 KIT KP - WKTL CVRSN TO 3-LINES $136
19.4 KIT, W/T CONV, PLANER & SAW $1,389
19.5 KIT KX - WKTL CVRSN TO 3-LINES $1,705
19.6 KIT KY - WKTL CVRSN TO 3-LINES $1,688
19.7 KIT KZ - WKTL CVRSN TO 3-LINES $1,894
19.8 KIT KS - WKTL CVRSN TO 5-LINES $316
19.9 KIT KA - WKTL CVRSN TO XHP $136
19.10 KIT KB - WKTL CVRSN TO XHP $200
19.11 KIT KC - WKTL CVRSN TO XHP $200
19.12 KIT KD - WKTL CVRSN TO XHP $200
19.13 KIT KE - WKTL CVRSN TO XHP $253
19.14 KIT KF - WKTL CVRSN TO XHP $139
19.15 KIT KG - WKTL CVRSN TO XHP $253
19.16 KIT KH - WKTL CVRSN TO XHP $253
19.17 KIT KJ - WKTL CVRSN TO XHP $253
19.18 KIT KK - WKTL CVRSN TO XHP $253
19.19 KIT KM - WKTL CVRSN TO XHP $136
19.20 KIT KR - WKTL CVRSN TO XHP $136
19.21 TANK, WATER, B-SERIES MACHINES $1,617
19.22 TANK, WATER $1,617
19.23 ARM, MATERIAL HANDLING $1,536
19.24 S305 HYDRAULIC SCRAP SHEAR $31,268
20.0 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options,(Specify years, miles or hours extended term covers.)
20.1 2 YEAR/2000 HOUR Powertrain 830.00$
20.2 2 YEAR/2000 HOUR Powertrain + Hydraulics 880.00$
20.3 2 YEAR/2000 HOUR Premier 1,240.00$
20.4 3 YEAR/3000 HOUR Powertrain 2,020.00$
20.5 3 YEAR/3000 HOUR Powertrain + Hydraulics 2,320.00$
20.6 3 YEAR/3000 HOUR Premier 3,290.00$
20.7 4 YEAR/4000 HOUR Powertrain 3,290.00$
20.8 5 YEAR/5000 HOUR Powertrain 5,300.00$
20.9 *does not include travel charges
20.10 *see attached warranty statement
21.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment
Hourly Rental Rate: $20.00
Weekly Rental Rate: $330.00Monthly Rental Rate: $990.00
Percent (%) of Rental Fee applied to purchase price: 85%
If the new rental equipment is purchased and financed
Charges are applicable for the actual rental term only.State the actual interest rate here: ________________
22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM(See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price $11.00
23.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 0% (See Special Terms and Conditions)
24.0 DELIVERY STARTING POINT - City, State, Zip Nearest Ziegler Location (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $2.50
25.0 INSTALLATION - PER HOUR (Hourly Shop Rate):Installation services may be requested on an "as needed" basis - see Special Terms and Conditions.) 118.00$
26.0 PRICE FOR SERVICE MANUAL 680.00$
27.0 PRICE FOR PARTS MANUAL 65.00$
28.0 PRICE FOR OPERATIONS MANUAL 65.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Price quote for: Skid Steers
Vendor Name: Ziegler Inc.
Contact Person: Jeff Schmidt
Street Address: 901 West 94th Street
P.O. Box:
City, State, Zip Bloomington, MN 55420
Phone #: 952-888-4121
Toll Free #: 800-352-2812
Fax #: 952-887-5820
Email Address: [email protected]
1997-2003
Spec # Information Requested Answer
1.0 MAKE AND MODEL Caterpillar 246D
Engine Type and SAE net HP Cat 3.3B DIT (Turbo) 72.9 HP
Tier 4 Compliant? (Y/N) Yes
Length w/o attachments 117.8"
Height with operator cab 83.1
Ground clearance 8.9"
Maximum height to bucket hinge pin 124.2"
Breakout force 7,355 lb
Reach at maximum height 23.6
Dump angle at maximum height 39 degrees
Dump height with standard bucket 97.1"
Front clearance circle with standard bucket 85.9"
Rear clearance circle 71.2"
Tipping load - SAE rated 4.300 lbs.
Rated operating capacity - SAE 2,150 lbs.
Standard bucket capacity - SAE heaped rating .57 cu yd
Operating weight - SAE rated 7.424 lbs.
Travel speed 1 speed -7.7 mph 2-speed 11 mph
Fuel tank capacity 24.8 gallons
Cold weather starting assist Glow Plugs
Battery CCA 880 CCA
Alternator size - amps 80 amps
Transmission type Hydrostatic
Tire / Track size / width TIRES, 12X16.5 10PR CAT- 72" WIDTH
Final drive chains and drive method #100 pre-stressed chain Direct sprocket
to chain drive
Final drive chain adjustment / maintenance 500 Hours
Gauges / instrumentation Gauges: fuel level, hour meter
Instrumentation: Engine coolant
temperature, engine oil pressure,
hydraulic oil temperature
Pump type - GPM and PSI Gear/22 GPM/3335 PSI
Control valves Hydraulic 3 section
Hydraulic oil cooler Included - air to oil
Drive controls Electro/Hydraulic - hand controls
Lift and tilt controls Electro/Hydraulic - hand controls
Engine speed control Both foot and hand control
Work lights - front Included 2 each
Version of Excel used:
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Information Requested Answer
Work lights - rear Included 2 each
Standard Warranty: Months, hours, years, etc. 1 year Unlimited hour parts/labor
BASE UNIT PRICE: $ 34,090.00
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1.0 Price for base unit: 34,090.00$
2.0 Skid Steer Options:
Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab
etc.. These options should be for skid steer power unit and not attachments.
2.1 PRESSURIZED CAB, HEATER/DEFROSTER & DOOR 2,180.00$
2.2 PRESSURIZED CAB, HEATER/DEFROSTER, AIR CONDITIONING & DOOR 3,580.00$
2.3 AIR SUSPENSION SEAT-CLOTH 310.00$
2.4 AIR SUSPENSION SEAT-VINYL 290.00$
2.5 ELECTRIC WORK TOOL CONTROL 380.00$
2.6 TWO SPEED CONTROL 1,420.00$
2.7 ELECTRIC QUICK COUPLER 680.00$
2.8 BEACON LIGHT 150.00$
2.9 LIFTING EYE 4 POINT 140.00$
2.10 FOPS, LEVEL 2 2,200.00$
2.11 COUNTERWEIGHT, MACHINE EXTERNAL 710.00$
2.12 RIDE CONTROL 720.00$
2.13 ADVANCED DISPLAY 670.00$
2.14 ADVANCED DISPLAY WITH BACKUP CAMERA 950.00$
2.15 HIGH FLOW HYDRAULICS 2,930.00$
2.16 RADIO READY 110.00$
2.17 RADIO AM-FM, CD, BLUETOOTH 350.00$
2.18 PATTERN CHANGER 1,350.00$
2.19 CASE DEDICATED CONTROLS 450.00$
2.20 DUAL SELF-LEVELING -$
2.21 EXTRA HEAVY DUTY 1000 CCA BATTERY 60.00$
2.22 RETURN TO DIG/ WORKTOOL POSITIONER 200.00$
2.23 OIL, HYDRAULIC, COLD OPERATION 460.00$
2.24 PAINT, CUSTOM 880.00$
2.25 DOOR, CAB, POLYCARBONATE 150.00$
2.26 PROPORTIONAL HYDRAULICS -$
2.27 PRODUCT LINK, CELLULAR, PL421 470.00$
2.28 TIRES, 10X16.5 8PR CAT- 66" WIDTH 50.00$
2.29 TIRES, 10 X 16.5 10PR CAT, XD- 66" WIDTH 580.00$
2.30 TIRES, 10 X 16.5 8PR GALAXY- 66" WIDTH (150.00)$
2.31 TIRES, 31 X 6 X 10 CAT, FLXPRT- 66" WIDTH 1,520.00$
2.32 TIRES, 12 X 16.5 10PR GALAXY - 66" WIDTH 260.00$
2.33 TIRES, 12X16.5 10PR CAT- 66" WIDTH 240.00$
2.34 TIRES, 12 X 16.5 14PR CAT, XD 66" WIDTH 820.00$
2.35 TIRES, 12 X 16.5 10PR GALAXY - 72" WIDTH 260.00$
2.36 TIRES, 12X16.5 10PR CAT- 72" WIDTH 240.00$
2.37 TIRES, 12 X 16.5 14PR CAT, XD 72" WIDTH 820.00$
2.38 TIRES, 33 X 6 X 11 CAT, FLXPRT 72" WIDTH 2,060.00$
3.0 Bucket Options:
Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 BUCKET-GENERAL PURPOSE, BASE EDGE 60" $861
3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" $1,042
3.3 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 60" $1,238
3.4 BUCKET-GENERAL PURPOSE, BASE EDGE 66" $1,175
3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" $1,382
3.6 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 66" $1,549
3.7 BUCKET-GENERAL PURPOSE, BASE EDGE 72" $1,275
3.8 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" $1,533
3.9 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 72" $1,630
3.10 BUCKET-GENERAL PURPOSE, BASE EDGE 78" $1,389
3.11 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" $1,624
3.12 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 78" $1,733
3.13 BUCKET-GENERAL PURPOSE, BASE EDGE 84" $1,511
3.14 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" $1,769
3.15 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 84" $1,891
3.16 BUCKET-DIRT, BOLT ON CUTTING EDGE 54" $788
3.17 BUCKET-DIRT, BOLT ON CUTTING EDGE 60" $896
3.18 BUCKET-DIRT, BOLT ON CUTTING EDGE 66" $1,077
3.19 BUCKET-DIRT, BOLT ON CUTTING EDGE 72" $1,134
3.20 BUCKET-DIRT, BOLT ON CUTTING EDGE 78" $1,250
3.21 BUCKET-LIGHT MATERIAL, BASE EDGE 72" $1,407
3.22 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" $1,630
3.23 BUCKET-LIGHT MATERIAL, BASE EDGE 78" $1,494
3.24 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" $1,733
3.25 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" $1,820
3.26 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" $1,981
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
3.27 BUCKET-MULTI-PURPOSE, BASE EDGE, 60" $3,600
3.28 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" $3,751
3.29 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" $3,965
3.30 BUCKET-MULTI-PURPOSE, BASE EDGE 66" $3,764
3.31 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" $3,931
3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" $4,133
3.33 BUCKET-MULTI-PURPOSE, BASE EDGE 72" $4,233
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" $4,425
3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" $4,597
3.36 BUCKET-MULTI-PURPOSE, BASE EDGE 78" $4,535
3.37 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" $4,724
3.38 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" $4,766
3.39 BUCKET-MULTI-PURPOSE, BASE EDGE 84" $4,854
3.40 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" $5,054
3.41 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" $5,098
3.42 BUCKET-UTILITY, BASE EDGE 60" $985
3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" $1,161
3.44 BUCKET-UTILITY, BASE EDGE 66" $1,221
3.45 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" $1,376
3.46 BUCKET-UTILITY, BASE EDGE 72" $1,407
3.47 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" $1,584
4.0 Overtire tracks:
Use this section to offer overtire tracks.
4.1
4.2
5.0 Pallet forks:
Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 FORKS, 36" PALLET W/ CARRIAGE 915.00$
5.2 FORKS, 42" PALLET W/ CARRIAGE 961.00$
5.3 FORKS, 48" PALLET W/ CARRIAGE 1,019.00$
5.4 FORKS, UTILITY, 66" 926.00$
5.5 FORKS, UTILITY, 66" 932.00$
5.6 FORKS, UTILITY, 72" 1,058.00$
5.7 FORKS, UTILITY, 72" 1,070.00$
6.0 Adaptor plate:
Use this section to offer adaptor plate options.
6.1 Universal Adapter Plate 210.00$
7.0 Snowblower:
Use this section to offer snowblower options.
7.1 SNOW BLOWER, SR117, 67" 7,280.00$
7.2 SNOW BLOWER, SR118, 73" 8,077.00$
7.3 SNOW BLOWER, SR121, 85" 8,438.00$
7.4 SNOW BLOWER, SR318, 73" XPS REQUIRED 8,720.00$
7.5 SNOW BLOWER, SR321, 85" XPS REQUIRED 9,263.00$
8.0 Sweeper:
Use this section to offer sweeper options.
8.1 BROOM, MANUAL ANGLE, BA18 $6,574
8.2 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.3 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.4 KIT, WATER SPRINKLER $790
8.5 KIT, DEFLECTOR $424
8.6 BROOM, PICKUP, BP15B $6,152
8.7 BROOM, PICKUP, BP18B $7,033
8.8 BRACKET, BROOM B & C SERIES FOR BP BROOMS $239
8.9 BROOM, UTILITY, BU115 $4,407
8.10 BROOM, UTILITY, BU118 $4,790
8.11 BRUSH, GUTTER, B-SERIES $2,356
8.12 MOUNTING BRACKET, NOZZLE Kit of 4 $200
8.13 KIT, WATER SPRINKLER FOR BP BROOMS $209
8.14 KIT, WATER TANK, BROOM FOR BU BROOMS $758
8.15 KIT, WATER SPRINKLER FOR BA18 $790
9.0 Backhoe:
Use this section to offer backhoe options.
9.1 BACKHOE, BH150 $14,988
9.2 BACKHOE, BH160 W/ AUXILIARY $16,187
9.3 GROUP, BACKHOE MOUNTING $1,375
9.4 BUCKET-DIG, 10" $653
9.5 BUCKET-DIG, 12" $588
9.6 BUCKET-DIG, 16" $617
9.7 BUCKET-DIG, 18" $619
9.8 BUCKET-DIG, 20" $692
9.9 BUCKET-DIG, 24" $730
9.10 BUCKET-DC, 32" $780
9.11 BUCKET-DC, 40" $809
9.12 BUCKET-DC, 47" $904
9.13 PINS, BUCKET $91
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
9.14 BUCKET, 12", 1.7 CFT, HD $810
9.15 BUCKET, 16", 2.5 CFT, HD $844
9.16 BUCKET, 18", 2.9 CFT, HD $905
9.17 BUCKET, 20", 3.3 CFT, HD $961
9.18 BUCKET, 24", 4.2 CFT, HD $1,015
9.19 BUCKET, 30", 5.6 CFT, HD $1,171
9.20 BUCKET-DC, 40" $955
9.21 BUCKET-DC, 47" $973
9.22 BUCKET-DC, 55" $1,070
9.23 PINS,BUCKET $113
9.24 GUARD, OP PROTECTION MESH $556
9.25 A14B AUGER, DRIVE UNIT $2,255
9.26 A19B AUGER, DRIVE UNIT $2,822
9.27 EXTENSION, AUGER 12" $140
9.28 EXTENSION, AUGER 24" $187
9.29 BUCKET - TILTING, DC, 47" $3,140
9.30 CVP16 COMULTI-PURPOSEACTOR PLATE $5,142
9.31 BLADE, BACKFILL $658
9.32 BRACKET, MOUNTING $752
9.33 BRACKET, SWIVEL $1,182
9.34 LINES, CONNECTOR $568
9.35 COUPLER, PG, MANUAL, DUAL LOCK $1,222
10.0 Planer:
Use this section to offer planer options.
10.1 COLD PLANER, PC104B $11,683
10.2 COLD PLANER, PC203 $12,233
10.3 COLD PLANER PC205B $14,720
10.4 COLD PLANER, PC205 $16,149
10.5 COLD PLANER, PC306B REQUIRES XPS HYDRAULICS $20,516
10.6 COLD PLANER, PC310B REQUIRES XPS HYDRAULICS $26,891
10.7 COLD PLANER, PC408B REQUIRES XHP HYDRAULICS $22,712
10.8 COLD PLANER, PC412B REQUIRES XHP HYDRAULICS $29,179
10.9 KIT, WATER SPRINKLER $267
11.0 Snow Plow:
Use this section to offer snow plow options.
11.1 ANGLE BLADE, 72" $2,830
11.2 ANGLE BLADE, 84" $3,016
11.3 KIT, SNOW AND IMULTI-PURPOSEACT, 72" $553
11.4 KIT, SNOW AND IMULTI-PURPOSEACT, 84" $553
11.5 SNOW PUSH, SSL, STD DTY 8' $7,260
11.6 SNOW PUSH, SSL, STD DTY 10' $7,985
11.7 SNOW PUSH, SSL, STD DTY 12' $8,494
11.8 SNOW PUSH, SSL, STD DTY 15' $8,965
12.0 Hydraulic breaker:
Use this section to offer hydraulic breaker options.
12.1 H55E HAMMER WITH SSL MOUNTS 11,330.00$
12.2 H65E HAMMER WITH SSL MOUNTS 15,200.00$
13.0 Grapple:
Use this section to offer grapple options.
13.1 FORKS, INDUSTRIAL GRAPPLE, 66" $5,420
13.2 FORKS, INDUSTRIAL GRAPPLE, 72" $6,467
13.3 FORKS, UTILITY GRAPPLE, 66" $2,273
13.4 FORKS, UTILITY GRAPPLE, 72" $2,411
13.5 BUCKET, INDUSTRIAL GRAPPLE, 60" BASE $3,944
13.6 BUCKET, INDUSTRIAL GRAPPLE, 60" BOLT ON CUTTING EDGE $4,107
13.7 BUCKET, INDUSTRIAL GRAPPLE, 66" BASE $4,137
13.8 BUCKET, INDUSTRIAL GRAPPLE, 66" BOLT ON CUTTING EDGE $4,309
13.9 BUCKET, INDUSTRIAL GRAPPLE, 72" BASE $4,625
13.10 BUCKET, INDUSTRIAL GRAPPLE, 72" BOLT ON CUTTING EDGE $4,824
13.11 BUCKET, INDUSTRIAL GRAPPLE 78" BASE $5,114
13.12 BUCKET, INDUSTRIAL GRAPPLE, 78" BOLT ON CUTTING EDGE $5,306
13.13 RAKE, INDUSTRIAL GRAPPLE, 72" $3,660
13.14 RAKE, INDUSTRIAL GRAPPLE, 84" $4,098
13.15 BUCKET, UTILITY GRAPPLE, 66" $2,810
13.16 BUCKET, UTILITY GRAPPLE 72" $3,034
13.17 UTILITY GRAPPLE $1,215
14.0 Landscape:
Use this section to offer landscape options.
14.1 BRUSHCUTTER, BR160, 60" $5,483
14.2 BRUSHCUTTER, BR166, 66" $5,738
14.3 BRUSHCUTTER, BR172, 72" $5,992
14.4 BRUSHCUTTER, BR272, 72" HF $6,248
14.5 BRUSHCUTTER, BR272, 72" HF $6,248
14.6 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.7 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.8 LANDSCAPE RAKE, LR15B $7,142
14.9 LANDSCAPE RAKE, LR18B $7,779
14.10 LANDSCAPE TILLER, LT13B $5,470
14.11 LANDSCAPE TILLER, LT18B $6,584
14.12 MULCHER, HM312, CARBIDE TEETH REQUIRES XPS $20,629
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
14.13 MULCHER, HM315B, CARBIDE TEETH REQUIRES XPS $30,545
14.14 MULCHER, HM415B, CARBIDE TEETH REQUIRES XHP $31,933
14.15 GUARD, MANUAL COUPLER $52
14.16 POWER BOX RAKE-HYDRAULIC,PR172 $9,408
14.17 POWER BOX RAKE-HYDRAULIC,PR172 $9,406
14.18 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.19 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.20 POWER BOX RAKE-HYDRAULIC,PR190 $10,727
14.21 POWER BOX RAKE-HYDRAULIC,PR190 $10,726
14.22 POWER BOX RAKE-MANUAL, PR172 $9,019
14.23 POWER BOX RAKE-MANUAL, PR184 $9,335
14.24 STUMP GRINDER, SG16B $7,759
14.25 STUMP GRINDER, SG16B $7,763
14.26 STUMP GRINDER, SG18B $8,610
14.27 TRENCHER, T6B, MANUAL,NO CHAIN $4,264
14.28 TRENCHER,T6B, MAN. 6" STANDARD $4,754
14.29 TRENCHER,T6B, MAN. 8" STD $4,873
14.30 TRENCHER, T6B, MAN. 6" COMBO $4,995
14.31 TRENCHER, T6B,MAN 6" ROCKFROST $5,237
14.32 TRENCHER,T6B, MAN 6"TERMINATOR $5,484
14.33 TRENCHER, T6B, HYD, NO CHAIN $4,863
14.34 TRENCHER, T6B,HYD. 6" STANDARD $5,350
14.35 TRENCHER, T6B, HYD. 8" STD $5,470
14.36 TRENCHER, T6B, HYD 6" COMBO $5,592
14.37 TRENCHER, T6B,HYD 6" ROCKFROST $5,837
14.38 TRENCHER,T6B, HYD 6"TERMINATOR $6,080
14.39 TRENCHER, T9B, MANUAL,NO CHAIN $4,593
14.40 TRENCHER, T9B,MAN. 6" STANDARD $4,900
14.41 TRENCHER, T9B, MAN. 6" COMBO $6,539
14.42 TRENCHER, T9B,MAN 6" ROCKFROST $7,085
14.43 TRENCHER, T9B, HYD, NO CHAIN $5,205
14.44 TRENCHER, T9B,HYD. 6" STANDARD $5,430
14.45 TRENCHER, T9B, HYD. 8" STD. $6,143
14.46 TRENCHER, T9B, HYD. 6" COMBO $7,152
14.47 TRENCHER, T9B,HYD 6" ROCKFROST $7,525
14.48 TRENCHER, T15B, HF, NO CHAIN $7,680
14.49 TRENCHER, T15B, HF 6" STANDARD $8,440
14.50 TRENCHER, T15B, HF 8" STD. $9,720
14.51 TRENCHER, T15B, HF COMBO $11,475
14.52 CRUMBER ARM 36" $264
14.53 CRUMBER ARM 48" $293
14.54 CRUMBER ARM 60" $266
14.55 SHOE, CRUMBER ARM 6" - 8" $94
14.56 SHOE, CRUMBER ARM 10" - 12" $102
15.0 Grader:
Use this section to offer grader options.
15.1 BLADE, DOZER, 6-WAY, 79" $5,924
15.2 BLADE, DOZER, 6-WAY, 79" $5,924
15.3 BLADE, DOZER, 6-WAY, 92" $6,508
15.4 BLADE, DOZER, 6-WAY, 92" $6,508
16.0 Auger:
Use this section to offer auger options.
16.1 AUGER, A14B $2,218
16.2 AUGER, A19B $2,632
16.3 AUGER, A26B, HF $4,204
16.4 AUGER, A26B, HF $4,204
16.5 BIT, AUGER 6" $283
16.6 BIT, AUGER 9" $453
16.7 BIT, AUGER 12" $554
16.8 BIT, AUGER 15" STANDARD $637
16.9 BIT, AUGER 18" $734
16.10 BIT, AUGER 24" $919
16.11 BIT, AUGER 30" $1,026
16.12 BIT, AUGER 36" $1,427
16.13 BIT, AUGER 6" INDUSTRIAL $447
16.14 BIT, AUGER 9" INDUSTRIAL $531
16.15 BIT, AUGER 12" INDUSTRIAL $605
16.16 BIT, AUGER 16" INDUSTRIAL $891
16.17 BIT, AUGER 18" INDUSTRIAL $917
16.18 BIT, AUGER 24" INDUSTRIAL $1,209
16.19 TREE BIT, AUGER 24" $838
16.20 TREE BIT, AUGER 36" $1,312
16.21 ROCK HEAD, 6" BOLT-ON $255
16.22 ROCK HEAD, 9" BOLT-ON $320
16.23 ROCK DRILL HEAD, 12" STANDARD $383
16.24 ROCK HEAD, 15" BOLT-ON $447
16.25 ROCK DRILL HEAD, 18" STANDARD $510
16.26 ROCK DRILL HEAD, 24" STANDARD $669
16.27 ADAPTER, AUGER - HEX TO ROUND $157
16.28 ADAPTER, AUGER - ROUND TO HEX $134
16.29 EXTENSION, TELESCOPING 3' $320
16.30 EXTENSION, TELESCOPING 6' $541
16.31 EXTENSION, AUGER 12" $140
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
16.32 EXTENSION, AUGER 24" $187
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WHEEL SAW, SW45, 8" $24,522
17.2 WHEEL SAW, SW60, 6" $27,527
17.3 WHEEL SAW, SW345B, 3" $22,599
17.4 WHEEL SAW, SW360B, 3" $25,376
17.5 WHEEL SAW, SW360B, 6" $27,144
17.6 WHEEL SAW, SW360B, 8" $29,336
17.7 WHEEL SAW, SW460B, 3" $32,209
17.8 WHEEL SAW, SW460B, 6" $32,849
17.9 WHEEL SAW, SW460B, 8" $34,220
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 VIBRATORY COMPACTOR, CV16B $11,064
18.2 VIBRATORY COMPACTOR, CV18B $11,864
19.0 Other:Use this section to offer any other option not already covered.
19.1 KIT KL - WKTL CVRSN TO 3-LINES $136
19.2 KIT KN - WKTL CVRSN TO 3-LINES $136
19.3 KIT KP - WKTL CVRSN TO 3-LINES $136
19.4 KIT, W/T CONV, PLANER & SAW $1,389
19.5 KIT KX - WKTL CVRSN TO 3-LINES $1,705
19.6 KIT KY - WKTL CVRSN TO 3-LINES $1,688
19.7 KIT KZ - WKTL CVRSN TO 3-LINES $1,894
19.8 KIT KS - WKTL CVRSN TO 5-LINES $316
19.9 KIT KA - WKTL CVRSN TO XHP $136
19.10 KIT KB - WKTL CVRSN TO XHP $200
19.11 KIT KC - WKTL CVRSN TO XHP $200
19.12 KIT KD - WKTL CVRSN TO XHP $200
19.13 KIT KE - WKTL CVRSN TO XHP $253
19.14 KIT KF - WKTL CVRSN TO XHP $139
19.15 KIT KG - WKTL CVRSN TO XHP $253
19.16 KIT KH - WKTL CVRSN TO XHP $253
19.17 KIT KJ - WKTL CVRSN TO XHP $253
19.18 KIT KK - WKTL CVRSN TO XHP $253
19.19 KIT KM - WKTL CVRSN TO XHP $136
19.20 KIT KR - WKTL CVRSN TO XHP $136
19.21 TANK, WATER, B-SERIES MACHINES $1,617
19.22 TANK, WATER $1,617
19.23 ARM, MATERIAL HANDLING $1,536
19.24 S305 HYDRAULIC SCRAP SHEAR $31,268
20.0 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options,(Specify years, miles or hours extended term covers.)
20.1 2 YEAR/2000 HOUR Powertrain 500.00$
20.2 2 YEAR/2000 HOUR Powertrain + Hydraulics 630.00$
20.3 2 YEAR/2000 HOUR Premier 1,080.00$
20.4 3 YEAR/3000 HOUR Powertrain 1,330.00$
20.5 3 YEAR/3000 HOUR Powertrain + Hydraulics 1,660.00$
20.6 3 YEAR/3000 HOUR Premier 2,850.00$
20.7 4 YEAR/4000 HOUR Powertrain 2,110.00$
20.8 5 YEAR/5000 HOUR Powertrain 3,330.00$
20.9 *does not include travel charges
20.10 *see attached warranty statement
21.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment
Hourly Rental Rate: 22.00$
Weekly Rental Rate: 360.00$
Monthly Rental Rate: 1,080.00$
Percent (%) of Rental Fee applied to purchase price: 85%
If the new rental equipment is purchased and financed
Charges are applicable for the actual rental term only.State the actual interest rate here: ________________
22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM(See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price 13.00$
23.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 0% (See Special Terms and Conditions)
24.0 DELIVERY STARTING POINT - City, State, Zip Nearest Ziegler Location (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $2.50
25.0 INSTALLATION - PER HOUR (Hourly Shop Rate):Installation services may be requested on an "as needed" basis - see Special Terms and Conditions.) 118.00$
26.0 PRICE FOR SERVICE MANUAL 680.00$
27.0 PRICE FOR PARTS MANUAL 65.00$
28.0 PRICE FOR OPERATIONS MANUAL 65.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Price quote for: Skid Steers
Vendor Name: Ziegler Inc.
Contact Person: Jeff Schmidt
Street Address: 901 West 94th Street
P.O. Box:
City, State, Zip Bloomington, MN 55420
Phone #: 952-888-4121
Toll Free #: 800-352-2812
Fax #: 952-887-5820
Email Address: [email protected]
1997-2003
Spec # Information Requested Answer
1.0 MAKE AND MODEL Caterpillar 262D
Engine Type and SAE net HP Cat 3.3B DIT (Turbo) 72.9 HP
Tier 4 Compliant? (Y/N) Yes
Length w/o attachments 117.9"
Height with operator cab 83.1
Ground clearance 8.9"
Maximum height to bucket hinge pin 124.9"
Breakout force 7,355 lb
Reach at maximum height 30.9"
Dump angle at maximum height 51 degrees
Dump height with standard bucket 93.7"
Front clearance circle with standard bucket 85.9"
Rear clearance circle 71.1"
Tipping load - SAE rated 5,400 lbs.
Rated operating capacity - SAE 2,700 lbs.
Standard bucket capacity - SAE heaped rating .57 cu yd
Operating weight - SAE rated 8,011 lbs.
Travel speed 1 speed -7.7 mph 2-speed 11 mph
Fuel tank capacity 24.8 gallons
Cold weather starting assist Glow Plugs
Battery CCA 880 CCA
Alternator size - amps 80 amps
Transmission type Hydrostatic
Tire / Track size / width TIRES, 12X16.5 10PR CAT- 72" WIDTH
Final drive chains and drive method #100 pre-stressed chain Direct sprocket
to chain drive
Final drive chain adjustment / maintenance 500 Hours
Gauges / instrumentation Gauges: fuel level, hour meter
Instrumentation: Engine coolant
temperature, engine oil pressure,
hydraulic oil temperature
Pump type - GPM and PSI Gear/22 GPM/3335 PSI
Control valves Hydraulic 3 section
Hydraulic oil cooler Included - air to oil
Drive controls Electro/Hydraulic - hand controls
Lift and tilt controls Electro/Hydraulic - hand controls
Engine speed control Both foot and hand control
Work lights - front Included 2 each
Version of Excel used:
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Information Requested Answer
Work lights - rear Included 2 each
Standard Warranty: Months, hours, years, etc. 1 year Unlimited hour parts/labor
BASE UNIT PRICE: $ 36,795.00
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1.0 Price for base unit: 36,795.00$
2.0 Skid Steer Options:
Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab
etc.. These options should be for skid steer power unit and not attachments.
2.1 PRESSURIZED CAB, HEATER/DEFROSTER & DOOR 2,180.00$
2.2 PRESSURIZED CAB, HEATER/DEFROSTER, AIR CONDITIONING & DOOR 3,580.00$
2.3 AIR SUSPENSION SEAT-CLOTH 310.00$
2.4 AIR SUSPENSION SEAT-VINYL 290.00$
2.5 ELECTRIC WORK TOOL CONTROL 380.00$
2.6 TWO SPEED CONTROL 1,420.00$
2.7 ELECTRIC QUICK COUPLER 680.00$
2.8 BEACON LIGHT 150.00$
2.9 LIFTING EYE 4 POINT 140.00$
2.10 FOPS, LEVEL 2 2,200.00$
2.11 COUNTERWEIGHT, MACHINE EXTERNAL 710.00$
2.12 RIDE CONTROL 720.00$
2.13 ADVANCED DISPLAY 670.00$
2.14 ADVANCED DISPLAY WITH BACKUP CAMERA 950.00$
2.15 HIGH FLOW HYDRAULICS 2,930.00$
2.16 RADIO READY 110.00$
2.17 RADIO AM-FM, CD, BLUETOOTH 350.00$
2.18 PATTERN CHANGER 1,350.00$
2.19 CASE DEDICATED CONTROLS 450.00$
2.20 DUAL SELF-LEVELING -$
2.21 EXTRA HEAVY DUTY 1000 CCA BATTERY 60.00$
2.22 RETURN TO DIG/ WORKTOOL POSITIONER 200.00$
2.23 OIL, HYDRAULIC, COLD OPERATION 460.00$
2.24 PAINT, CUSTOM 880.00$
2.25 DOOR, CAB, POLYCARBONATE 150.00$
2.26 PROPORTIONAL HYDRAULICS -$
2.27 PRODUCT LINK, CELLULAR, PL421 470.00$
2.28 TIRES, 10X16.5 8PR CAT- 66" WIDTH 50.00$
2.29 TIRES, 10 X 16.5 10PR CAT, XD- 66" WIDTH 580.00$
2.30 TIRES, 10 X 16.5 8PR GALAXY- 66" WIDTH (150.00)$
2.31 TIRES, 31 X 6 X 10 CAT, FLXPRT- 66" WIDTH 1,520.00$
2.32 TIRES, 12 X 16.5 10PR GALAXY - 66" WIDTH 260.00$
2.33 TIRES, 12X16.5 10PR CAT- 66" WIDTH 240.00$
2.34 TIRES, 12 X 16.5 14PR CAT, XD 66" WIDTH 820.00$
2.35 TIRES, 12 X 16.5 10PR GALAXY - 72" WIDTH 260.00$
2.36 TIRES, 12X16.5 10PR CAT- 72" WIDTH 240.00$
2.37 TIRES, 12 X 16.5 14PR CAT, XD 72" WIDTH 820.00$
2.38 TIRES, 33 X 6 X 11 CAT, FLXPRT 72" WIDTH 2,060.00$
3.0 Bucket Options:
Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 BUCKET-GENERAL PURPOSE, BASE EDGE 60" $861
3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" $1,042
3.3 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 60" $1,238
3.4 BUCKET-GENERAL PURPOSE, BASE EDGE 66" $1,175
3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" $1,382
3.6 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 66" $1,549
3.7 BUCKET-GENERAL PURPOSE, BASE EDGE 72" $1,275
3.8 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" $1,533
3.9 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 72" $1,630
3.10 BUCKET-GENERAL PURPOSE, BASE EDGE 78" $1,389
3.11 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" $1,624
3.12 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 78" $1,733
3.13 BUCKET-GENERAL PURPOSE, BASE EDGE 84" $1,511
3.14 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" $1,769
3.15 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 84" $1,891
3.16 BUCKET-DIRT, BOLT ON CUTTING EDGE 54" $788
3.17 BUCKET-DIRT, BOLT ON CUTTING EDGE 60" $896
3.18 BUCKET-DIRT, BOLT ON CUTTING EDGE 66" $1,077
3.19 BUCKET-DIRT, BOLT ON CUTTING EDGE 72" $1,134
3.20 BUCKET-DIRT, BOLT ON CUTTING EDGE 78" $1,250
3.21 BUCKET-LIGHT MATERIAL, BASE EDGE 72" $1,407
3.22 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" $1,630
3.23 BUCKET-LIGHT MATERIAL, BASE EDGE 78" $1,494
3.24 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" $1,733
3.25 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" $1,820
3.26 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" $1,981
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
3.27 BUCKET-MULTI-PURPOSE, BASE EDGE, 60" $3,600
3.28 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" $3,751
3.29 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" $3,965
3.30 BUCKET-MULTI-PURPOSE, BASE EDGE 66" $3,764
3.31 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" $3,931
3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" $4,133
3.33 BUCKET-MULTI-PURPOSE, BASE EDGE 72" $4,233
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" $4,425
3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" $4,597
3.36 BUCKET-MULTI-PURPOSE, BASE EDGE 78" $4,535
3.37 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" $4,724
3.38 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" $4,766
3.39 BUCKET-MULTI-PURPOSE, BASE EDGE 84" $4,854
3.40 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" $5,054
3.41 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" $5,098
3.42 BUCKET-UTILITY, BASE EDGE 60" $985
3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" $1,161
3.44 BUCKET-UTILITY, BASE EDGE 66" $1,221
3.45 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" $1,376
3.46 BUCKET-UTILITY, BASE EDGE 72" $1,407
3.47 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" $1,584
4.0 Overtire tracks:
Use this section to offer overtire tracks.
4.1
4.2
5.0 Pallet forks:
Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 FORKS, 36" PALLET W/ CARRIAGE 915.00$
5.2 FORKS, 42" PALLET W/ CARRIAGE 961.00$
5.3 FORKS, 48" PALLET W/ CARRIAGE 1,019.00$
5.4 FORKS, UTILITY, 66" 926.00$
5.5 FORKS, UTILITY, 66" 932.00$
5.6 FORKS, UTILITY, 72" 1,058.00$
5.7 FORKS, UTILITY, 72" 1,070.00$
6.0 Adaptor plate:
Use this section to offer adaptor plate options.
6.1 Universal Adapter Plate 210.00$
7.0 Snowblower:
Use this section to offer snowblower options.
7.1 SNOW BLOWER, SR117, 67" 7,280.00$
7.2 SNOW BLOWER, SR118, 73" 8,077.00$
7.3 SNOW BLOWER, SR121, 85" 8,438.00$
7.4 SNOW BLOWER, SR318, 73" XPS REQUIRED 8,720.00$
7.5 SNOW BLOWER, SR321, 85" XPS REQUIRED 9,263.00$
8.0 Sweeper:
Use this section to offer sweeper options.
8.1 BROOM, MANUAL ANGLE, BA18 $6,574
8.2 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.3 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.4 KIT, WATER SPRINKLER $790
8.5 KIT, DEFLECTOR $424
8.6 BROOM, PICKUP, BP15B $6,152
8.7 BROOM, PICKUP, BP18B $7,033
8.8 BRACKET, BROOM B & C SERIES FOR BP BROOMS $239
8.9 BROOM, UTILITY, BU115 $4,407
8.10 BROOM, UTILITY, BU118 $4,790
8.11 BRUSH, GUTTER, B-SERIES $2,356
8.12 MOUNTING BRACKET, NOZZLE Kit of 4 $200
8.13 KIT, WATER SPRINKLER FOR BP BROOMS $209
8.14 KIT, WATER TANK, BROOM FOR BU BROOMS $758
8.15 KIT, WATER SPRINKLER FOR BA18 $790
9.0 Backhoe:
Use this section to offer backhoe options.
9.1 BACKHOE, BH150 $14,988
9.2 BACKHOE, BH160 W/ AUXILIARY $16,187
9.3 GROUP, BACKHOE MOUNTING $1,375
9.4 BUCKET-DIG, 10" $653
9.5 BUCKET-DIG, 12" $588
9.6 BUCKET-DIG, 16" $617
9.7 BUCKET-DIG, 18" $619
9.8 BUCKET-DIG, 20" $692
9.9 BUCKET-DIG, 24" $730
9.10 BUCKET-DC, 32" $780
9.11 BUCKET-DC, 40" $809
9.12 BUCKET-DC, 47" $904
9.13 PINS, BUCKET $91
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
9.14 BUCKET, 12", 1.7 CFT, HD $810
9.15 BUCKET, 16", 2.5 CFT, HD $844
9.16 BUCKET, 18", 2.9 CFT, HD $905
9.17 BUCKET, 20", 3.3 CFT, HD $961
9.18 BUCKET, 24", 4.2 CFT, HD $1,015
9.19 BUCKET, 30", 5.6 CFT, HD $1,171
9.20 BUCKET-DC, 40" $955
9.21 BUCKET-DC, 47" $973
9.22 BUCKET-DC, 55" $1,070
9.23 PINS,BUCKET $113
9.24 GUARD, OP PROTECTION MESH $556
9.25 A14B AUGER, DRIVE UNIT $2,255
9.26 A19B AUGER, DRIVE UNIT $2,822
9.27 EXTENSION, AUGER 12" $140
9.28 EXTENSION, AUGER 24" $187
9.29 BUCKET - TILTING, DC, 47" $3,140
9.30 CVP16 COMULTI-PURPOSEACTOR PLATE $5,142
9.31 BLADE, BACKFILL $658
9.32 BRACKET, MOUNTING $752
9.33 BRACKET, SWIVEL $1,182
9.34 LINES, CONNECTOR $568
9.35 COUPLER, PG, MANUAL, DUAL LOCK $1,222
10.0 Planer:
Use this section to offer planer options.
10.1 COLD PLANER, PC104B $11,683
10.2 COLD PLANER, PC203 $12,233
10.3 COLD PLANER PC205B $14,720
10.4 COLD PLANER, PC205 $16,149
10.5 COLD PLANER, PC306B REQUIRES XPS HYDRAULICS $20,516
10.6 COLD PLANER, PC310B REQUIRES XPS HYDRAULICS $26,891
10.7 COLD PLANER, PC408B REQUIRES XHP HYDRAULICS $22,712
10.8 COLD PLANER, PC412B REQUIRES XHP HYDRAULICS $29,179
10.9 KIT, WATER SPRINKLER $267
11.0 Snow Plow:
Use this section to offer snow plow options.
11.1 ANGLE BLADE, 72" $2,830
11.2 ANGLE BLADE, 84" $3,016
11.3 KIT, SNOW AND IMULTI-PURPOSEACT, 72" $553
11.4 KIT, SNOW AND IMULTI-PURPOSEACT, 84" $553
11.5 SNOW PUSH, SSL, STD DTY 8' $7,260
11.6 SNOW PUSH, SSL, STD DTY 10' $7,985
11.7 SNOW PUSH, SSL, STD DTY 12' $8,494
11.8 SNOW PUSH, SSL, STD DTY 15' $8,965
12.0 Hydraulic breaker:
Use this section to offer hydraulic breaker options.
12.1 H55E HAMMER WITH SSL MOUNTS 11,330.00$
12.2 H65E HAMMER WITH SSL MOUNTS 15,200.00$
13.0 Grapple:
Use this section to offer grapple options.
13.1 FORKS, INDUSTRIAL GRAPPLE, 66" $5,420
13.2 FORKS, INDUSTRIAL GRAPPLE, 72" $6,467
13.3 FORKS, UTILITY GRAPPLE, 66" $2,273
13.4 FORKS, UTILITY GRAPPLE, 72" $2,411
13.5 BUCKET, INDUSTRIAL GRAPPLE, 60" BASE $3,944
13.6 BUCKET, INDUSTRIAL GRAPPLE, 60" BOLT ON CUTTING EDGE $4,107
13.7 BUCKET, INDUSTRIAL GRAPPLE, 66" BASE $4,137
13.8 BUCKET, INDUSTRIAL GRAPPLE, 66" BOLT ON CUTTING EDGE $4,309
13.9 BUCKET, INDUSTRIAL GRAPPLE, 72" BASE $4,625
13.10 BUCKET, INDUSTRIAL GRAPPLE, 72" BOLT ON CUTTING EDGE $4,824
13.11 BUCKET, INDUSTRIAL GRAPPLE 78" BASE $5,114
13.12 BUCKET, INDUSTRIAL GRAPPLE, 78" BOLT ON CUTTING EDGE $5,306
13.13 RAKE, INDUSTRIAL GRAPPLE, 72" $3,660
13.14 RAKE, INDUSTRIAL GRAPPLE, 84" $4,098
13.15 BUCKET, UTILITY GRAPPLE, 66" $2,810
13.16 BUCKET, UTILITY GRAPPLE 72" $3,034
13.17 UTILITY GRAPPLE $1,215
14.0 Landscape:
Use this section to offer landscape options.
14.1 BRUSHCUTTER, BR160, 60" $5,483
14.2 BRUSHCUTTER, BR166, 66" $5,738
14.3 BRUSHCUTTER, BR172, 72" $5,992
14.4 BRUSHCUTTER, BR272, 72" HF $6,248
14.5 BRUSHCUTTER, BR272, 72" HF $6,248
14.6 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.7 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.8 LANDSCAPE RAKE, LR15B $7,142
14.9 LANDSCAPE RAKE, LR18B $7,779
14.10 LANDSCAPE TILLER, LT13B $5,470
14.11 LANDSCAPE TILLER, LT18B $6,584
14.12 MULCHER, HM312, CARBIDE TEETH REQUIRES XPS $20,629
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
14.13 MULCHER, HM315B, CARBIDE TEETH REQUIRES XPS $30,545
14.14 MULCHER, HM415B, CARBIDE TEETH REQUIRES XHP $31,933
14.15 GUARD, MANUAL COUPLER $52
14.16 POWER BOX RAKE-HYDRAULIC,PR172 $9,408
14.17 POWER BOX RAKE-HYDRAULIC,PR172 $9,406
14.18 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.19 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.20 POWER BOX RAKE-HYDRAULIC,PR190 $10,727
14.21 POWER BOX RAKE-HYDRAULIC,PR190 $10,726
14.22 POWER BOX RAKE-MANUAL, PR172 $9,019
14.23 POWER BOX RAKE-MANUAL, PR184 $9,335
14.24 STUMP GRINDER, SG16B $7,759
14.25 STUMP GRINDER, SG16B $7,763
14.26 STUMP GRINDER, SG18B $8,610
14.27 TRENCHER, T6B, MANUAL,NO CHAIN $4,264
14.28 TRENCHER,T6B, MAN. 6" STANDARD $4,754
14.29 TRENCHER,T6B, MAN. 8" STD $4,873
14.30 TRENCHER, T6B, MAN. 6" COMBO $4,995
14.31 TRENCHER, T6B,MAN 6" ROCKFROST $5,237
14.32 TRENCHER,T6B, MAN 6"TERMINATOR $5,484
14.33 TRENCHER, T6B, HYD, NO CHAIN $4,863
14.34 TRENCHER, T6B,HYD. 6" STANDARD $5,350
14.35 TRENCHER, T6B, HYD. 8" STD $5,470
14.36 TRENCHER, T6B, HYD 6" COMBO $5,592
14.37 TRENCHER, T6B,HYD 6" ROCKFROST $5,837
14.38 TRENCHER,T6B, HYD 6"TERMINATOR $6,080
14.39 TRENCHER, T9B, MANUAL,NO CHAIN $4,593
14.40 TRENCHER, T9B,MAN. 6" STANDARD $4,900
14.41 TRENCHER, T9B, MAN. 6" COMBO $6,539
14.42 TRENCHER, T9B,MAN 6" ROCKFROST $7,085
14.43 TRENCHER, T9B, HYD, NO CHAIN $5,205
14.44 TRENCHER, T9B,HYD. 6" STANDARD $5,430
14.45 TRENCHER, T9B, HYD. 8" STD. $6,143
14.46 TRENCHER, T9B, HYD. 6" COMBO $7,152
14.47 TRENCHER, T9B,HYD 6" ROCKFROST $7,525
14.48 TRENCHER, T15B, HF, NO CHAIN $7,680
14.49 TRENCHER, T15B, HF 6" STANDARD $8,440
14.50 TRENCHER, T15B, HF 8" STD. $9,720
14.51 TRENCHER, T15B, HF COMBO $11,475
14.52 CRUMBER ARM 36" $264
14.53 CRUMBER ARM 48" $293
14.54 CRUMBER ARM 60" $266
14.55 SHOE, CRUMBER ARM 6" - 8" $94
14.56 SHOE, CRUMBER ARM 10" - 12" $102
15.0 Grader:
Use this section to offer grader options.
15.1 BLADE, DOZER, 6-WAY, 79" $5,924
15.2 BLADE, DOZER, 6-WAY, 79" $5,924
15.3 BLADE, DOZER, 6-WAY, 92" $6,508
15.4 BLADE, DOZER, 6-WAY, 92" $6,508
16.0 Auger:
Use this section to offer auger options.
16.1 AUGER, A14B $2,218
16.2 AUGER, A19B $2,632
16.3 AUGER, A26B, HF $4,204
16.4 AUGER, A26B, HF $4,204
16.5 BIT, AUGER 6" $283
16.6 BIT, AUGER 9" $453
16.7 BIT, AUGER 12" $554
16.8 BIT, AUGER 15" STANDARD $637
16.9 BIT, AUGER 18" $734
16.10 BIT, AUGER 24" $919
16.11 BIT, AUGER 30" $1,026
16.12 BIT, AUGER 36" $1,427
16.13 BIT, AUGER 6" INDUSTRIAL $447
16.14 BIT, AUGER 9" INDUSTRIAL $531
16.15 BIT, AUGER 12" INDUSTRIAL $605
16.16 BIT, AUGER 16" INDUSTRIAL $891
16.17 BIT, AUGER 18" INDUSTRIAL $917
16.18 BIT, AUGER 24" INDUSTRIAL $1,209
16.19 TREE BIT, AUGER 24" $838
16.20 TREE BIT, AUGER 36" $1,312
16.21 ROCK HEAD, 6" BOLT-ON $255
16.22 ROCK HEAD, 9" BOLT-ON $320
16.23 ROCK DRILL HEAD, 12" STANDARD $383
16.24 ROCK HEAD, 15" BOLT-ON $447
16.25 ROCK DRILL HEAD, 18" STANDARD $510
16.26 ROCK DRILL HEAD, 24" STANDARD $669
16.27 ADAPTER, AUGER - HEX TO ROUND $157
16.28 ADAPTER, AUGER - ROUND TO HEX $134
16.29 EXTENSION, TELESCOPING 3' $320
16.30 EXTENSION, TELESCOPING 6' $541
16.31 EXTENSION, AUGER 12" $140
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
16.32 EXTENSION, AUGER 24" $187
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WHEEL SAW, SW45, 8" $24,522
17.2 WHEEL SAW, SW60, 6" $27,527
17.3 WHEEL SAW, SW345B, 3" $22,599
17.4 WHEEL SAW, SW360B, 3" $25,376
17.5 WHEEL SAW, SW360B, 6" $27,144
17.6 WHEEL SAW, SW360B, 8" $29,336
17.7 WHEEL SAW, SW460B, 3" $32,209
17.8 WHEEL SAW, SW460B, 6" $32,849
17.9 WHEEL SAW, SW460B, 8" $34,220
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 VIBRATORY COMPACTOR, CV16B $11,064
18.2 VIBRATORY COMPACTOR, CV18B $11,864
19.0 Other:Use this section to offer any other option not already covered.
19.1 KIT KL - WKTL CVRSN TO 3-LINES $136
19.2 KIT KN - WKTL CVRSN TO 3-LINES $136
19.3 KIT KP - WKTL CVRSN TO 3-LINES $136
19.4 KIT, W/T CONV, PLANER & SAW $1,389
19.5 KIT KX - WKTL CVRSN TO 3-LINES $1,705
19.6 KIT KY - WKTL CVRSN TO 3-LINES $1,688
19.7 KIT KZ - WKTL CVRSN TO 3-LINES $1,894
19.8 KIT KS - WKTL CVRSN TO 5-LINES $316
19.9 KIT KA - WKTL CVRSN TO XHP $136
19.10 KIT KB - WKTL CVRSN TO XHP $200
19.11 KIT KC - WKTL CVRSN TO XHP $200
19.12 KIT KD - WKTL CVRSN TO XHP $200
19.13 KIT KE - WKTL CVRSN TO XHP $253
19.14 KIT KF - WKTL CVRSN TO XHP $139
19.15 KIT KG - WKTL CVRSN TO XHP $253
19.16 KIT KH - WKTL CVRSN TO XHP $253
19.17 KIT KJ - WKTL CVRSN TO XHP $253
19.18 KIT KK - WKTL CVRSN TO XHP $253
19.19 KIT KM - WKTL CVRSN TO XHP $136
19.20 KIT KR - WKTL CVRSN TO XHP $136
19.21 TANK, WATER, B-SERIES MACHINES $1,617
19.22 TANK, WATER $1,617
19.23 ARM, MATERIAL HANDLING $1,536
19.24 S305 HYDRAULIC SCRAP SHEAR $31,268
20.0 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options,(Specify years, miles or hours extended term covers.)
20.1 2 YEAR/2000 HOUR Powertrain 600.00$
20.2 2 YEAR/2000 HOUR Powertrain + Hydraulics 800.00$
20.3 2 YEAR/2000 HOUR Premier 1,390.00$
20.4 3 YEAR/3000 HOUR Powertrain 1,600.00$
20.5 3 YEAR/3000 HOUR Powertrain + Hydraulics 2,130.00$
20.6 3 YEAR/3000 HOUR Premier 3,710.00$
20.7 4 YEAR/4000 HOUR Powertrain 2,530.00$
20.8 5 YEAR/5000 HOUR Powertrain 4,020.00$
20.9 *does not include travel charges
20.10 *see attached warranty statement
21.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment
Hourly Rental Rate: 22.00$
Weekly Rental Rate: 360.00$
Monthly Rental Rate: 1,080.00$
Percent (%) of Rental Fee applied to purchase price: 85%
If the new rental equipment is purchased and financed
Charges are applicable for the actual rental term only.State the actual interest rate here: ________________
22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM(See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price 13.00$
23.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 0% (See Special Terms and Conditions)
24.0 DELIVERY STARTING POINT - City, State, Zip Nearest Ziegler Location (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $2.50
25.0 INSTALLATION - PER HOUR (Hourly Shop Rate):Installation services may be requested on an "as needed" basis - see Special Terms and Conditions.) 118.00$
26.0 PRICE FOR SERVICE MANUAL 680.00$
27.0 PRICE FOR PARTS MANUAL 65.00$
28.0 PRICE FOR OPERATIONS MANUAL 65.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Price quote for: Skid Steers
Vendor Name: Ziegler Inc.
Contact Person: Jeff Schmidt
Street Address: 901 West 94th Street
P.O. Box:
City, State, Zip Bloomington, MN 55420
Phone #: 952-888-4121
Toll Free #: 800-352-2812
Fax #: 952-887-5820
Email Address: [email protected]
1997-2003
Spec # Information Requested Answer
1.0 MAKE AND MODEL Caterpillar 272D
Engine Type and SAE net HP Yes
Tier 4 Compliant? (Y/N) Caterpillar C3.8 / 95 HP
Length w/o attachments 124.3 in.
Height with operator cab 83.1 in.
Ground clearance 8.6 in.
Maximum height to bucket hinge pin 127.1 in.
Breakout force 7,443 lbs. - tilt
Reach at maximum height 31.4 in.
Dump angle at maximum height 52 degrees
Dump height with standard bucket 95.7 in.
Front clearance circle with standard bucket 90.2 in.
Rear clearance circle 73.7 in.
Tipping load - SAE rated 6,400 lbs.
Rated operating capacity - SAE 3,200 lbs.
Standard bucket capacity - SAE heaped rating .62 cu yd.
Operating weight - SAE rated 8,252 lbs.
Travel speed 1 speed 6.6 mph 2 speed 9.4 mph
Fuel tank capacity 32.2 gallons
Cold weather starting assist yes-glow plugs
Battery CCA 880 CCA
Alternator size - amps 100 Amp
Transmission type Hydrostatic
Tire / Track size / width 12 x 16.5 10PR CAT
Final drive chains and drive method #100 pre-stressed chain Direct sprocket
to chain drive
Final drive chain adjustment / maintenance 500 Hours
Gauges / instrumentationGauges: fuel level, hour meter Instrumentation:
Engine coolant temperature, engine oil
pressure, hydraulic oil temperature
Pump type - GPM and PSI Gear/23 GPM/3335 PSI
Control valves Hydraulic 3 section
Hydraulic oil cooler Included - air to oil
Drive controls Electro/Hydraulic - hand controls
Lift and tilt controls Electro/Hydraulic - hand controls
Engine speed control Both foot and hand control
Work lights - front Included 2 each
Version of Excel used:
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Information Requested Answer
Work lights - rear Included 2 each
Standard Warranty: Months, hours, years, etc. 1 year, Unlimited hour parts/labor
BASE UNIT PRICE: $ 40,500.00
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1.0 Price for base unit: 40,500.00$
2.0 Skid Steer Options:
Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab
etc.. These options should be for skid steer power unit and not attachments.
2.1 PRESSURIZED CAB, HEATER/DEFROSTER & DOOR 2,180.00$
2.2 PRESSURIZED CAB, HEATER/DEFROSTER, AIR CONDITIONING & DOOR 3,580.00$
2.3 AIR SUSPENSION SEAT-CLOTH 310.00$
2.4 AIR SUSPENSION SEAT-VINYL 290.00$
2.5 ELECTRIC WORK TOOL CONTROL 380.00$
2.6 TWO SPEED CONTROL 1,420.00$
2.7 ELECTRIC QUICK COUPLER 680.00$
2.8 BEACON LIGHT 150.00$
2.9 LIFTING EYE 4 POINT 140.00$
2.10 FOPS, LEVEL 2 2,200.00$
2.11 COUNTERWEIGHT, MACHINE EXTERNAL 710.00$
2.12 RIDE CONTROL 720.00$
2.13 ADVANCED DISPLAY 670.00$
2.14 ADVANCED DISPLAY WITH BACKUP CAMERA 950.00$
2.15 HIGH FLOW HYDRAULICS 2,930.00$
2.16 RADIO READY 110.00$
2.17 RADIO AM-FM, CD, BLUETOOTH 350.00$
2.18 PATTERN CHANGER 1,350.00$
2.19 CASE DEDICATED CONTROLS 450.00$
2.20 DUAL SELF-LEVELING -$
2.21 EXTRA HEAVY DUTY 1000 CCA BATTERY 60.00$
2.22 RETURN TO DIG/ WORKTOOL POSITIONER 200.00$
2.23 OIL, HYDRAULIC, COLD OPERATION 460.00$
2.24 PAINT, CUSTOM 880.00$
2.25 DOOR, CAB, POLYCARBONATE 150.00$
2.26 PROPORTIONAL HYDRAULICS -$
2.27 PRODUCT LINK, CELLULAR, PL421 470.00$
2.28 TIRES, 10X16.5 8PR CAT- 66" WIDTH 50.00$
2.29 TIRES, 10 X 16.5 10PR CAT, XD- 66" WIDTH 580.00$
2.30 TIRES, 10 X 16.5 8PR GALAXY- 66" WIDTH (150.00)$
2.31 TIRES, 31 X 6 X 10 CAT, FLXPRT- 66" WIDTH 1,520.00$
2.32 TIRES, 12 X 16.5 10PR GALAXY - 66" WIDTH 260.00$
2.33 TIRES, 12X16.5 10PR CAT- 66" WIDTH 240.00$
2.34 TIRES, 12 X 16.5 14PR CAT, XD 66" WIDTH 820.00$
2.35 TIRES, 12 X 16.5 10PR GALAXY - 72" WIDTH 260.00$
2.36 TIRES, 12X16.5 10PR CAT- 72" WIDTH 240.00$
2.37 TIRES, 12 X 16.5 14PR CAT, XD 72" WIDTH 820.00$
2.38 TIRES, 33 X 6 X 11 CAT, FLXPRT 72" WIDTH 2,060.00$
2.39 TIRES, 14 X 17.5 14PR CAT, XD 1,660.00$
2.40 TIRES, 14 X 17.5 14PR CAT 1,280.00$
3.0 Bucket Options:
Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 BUCKET-GENERAL PURPOSE, BASE EDGE 60" $861
3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" $1,042
3.3 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 60" $1,238
3.4 BUCKET-GENERAL PURPOSE, BASE EDGE 66" $1,175
3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" $1,382
3.6 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 66" $1,549
3.7 BUCKET-GENERAL PURPOSE, BASE EDGE 72" $1,275
3.8 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" $1,533
3.9 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 72" $1,630
3.10 BUCKET-GENERAL PURPOSE, BASE EDGE 78" $1,389
3.11 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" $1,624
3.12 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 78" $1,733
3.13 BUCKET-GENERAL PURPOSE, BASE EDGE 84" $1,511
3.14 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" $1,769
3.15 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 84" $1,891
3.16 BUCKET-DIRT, BOLT ON CUTTING EDGE 54" $788
3.17 BUCKET-DIRT, BOLT ON CUTTING EDGE 60" $896
3.18 BUCKET-DIRT, BOLT ON CUTTING EDGE 66" $1,077
3.19 BUCKET-DIRT, BOLT ON CUTTING EDGE 72" $1,134
3.20 BUCKET-DIRT, BOLT ON CUTTING EDGE 78" $1,250
3.21 BUCKET-LIGHT MATERIAL, BASE EDGE 72" $1,407
3.22 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" $1,630
3.23 BUCKET-LIGHT MATERIAL, BASE EDGE 78" $1,494
3.24 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" $1,733
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
3.25 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" $1,820
3.26 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" $1,981
3.27 BUCKET-MULTI-PURPOSE, BASE EDGE, 60" $3,600
3.28 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" $3,751
3.29 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" $3,965
3.30 BUCKET-MULTI-PURPOSE, BASE EDGE 66" $3,764
3.31 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" $3,931
3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" $4,133
3.33 BUCKET-MULTI-PURPOSE, BASE EDGE 72" $4,233
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" $4,425
3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" $4,597
3.36 BUCKET-MULTI-PURPOSE, BASE EDGE 78" $4,535
3.37 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" $4,724
3.38 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" $4,766
3.39 BUCKET-MULTI-PURPOSE, BASE EDGE 84" $4,854
3.40 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" $5,054
3.41 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" $5,098
3.42 BUCKET-UTILITY, BASE EDGE 60" $985
3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" $1,161
3.44 BUCKET-UTILITY, BASE EDGE 66" $1,221
3.45 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" $1,376
3.46 BUCKET-UTILITY, BASE EDGE 72" $1,407
3.47 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" $1,584
4.0 Overtire tracks:
Use this section to offer overtire tracks.
4.1
4.2
5.0 Pallet forks:
Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 FORKS, 36" PALLET W/ CARRIAGE 915.00$
5.2 FORKS, 42" PALLET W/ CARRIAGE 961.00$
5.3 FORKS, 48" PALLET W/ CARRIAGE 1,019.00$
5.4 FORKS, UTILITY, 66" 926.00$
5.5 FORKS, UTILITY, 66" 932.00$
5.6 FORKS, UTILITY, 72" 1,058.00$
5.7 FORKS, UTILITY, 72" 1,070.00$
6.0 Adaptor plate:
Use this section to offer adaptor plate options.
6.1 Universal Adapter Plate 210.00$
7.0 Snowblower:
Use this section to offer snowblower options.
7.1 SNOW BLOWER, SR117, 67" 7,280.00$
7.2 SNOW BLOWER, SR118, 73" 8,077.00$
7.3 SNOW BLOWER, SR121, 85" 8,438.00$
7.4 SNOW BLOWER, SR318, 73" XPS REQUIRED 8,720.00$
7.5 SNOW BLOWER, SR321, 85" XPS REQUIRED 9,263.00$
8.0 Sweeper:
Use this section to offer sweeper options.
8.1 BROOM, MANUAL ANGLE, BA18 $6,574
8.2 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.3 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.4 KIT, WATER SPRINKLER $790
8.5 KIT, DEFLECTOR $424
8.6 BROOM, PICKUP, BP15B $6,152
8.7 BROOM, PICKUP, BP18B $7,033
8.8 BRACKET, BROOM B & C SERIES FOR BP BROOMS $239
8.9 BROOM, UTILITY, BU115 $4,407
8.10 BROOM, UTILITY, BU118 $4,790
8.11 BRUSH, GUTTER, B-SERIES $2,356
8.12 MOUNTING BRACKET, NOZZLE Kit of 4 $200
8.13 KIT, WATER SPRINKLER FOR BP BROOMS $209
8.14 KIT, WATER TANK, BROOM FOR BU BROOMS $758
8.15 KIT, WATER SPRINKLER FOR BA18 $790
9.0 Backhoe:
Use this section to offer backhoe options.
9.1 BACKHOE, BH150 $14,988
9.2 BACKHOE, BH160 W/ AUXILIARY $16,187
9.3 GROUP, BACKHOE MOUNTING $1,375
9.4 BUCKET-DIG, 10" $653
9.5 BUCKET-DIG, 12" $588
9.6 BUCKET-DIG, 16" $617
9.7 BUCKET-DIG, 18" $619
9.8 BUCKET-DIG, 20" $692
9.9 BUCKET-DIG, 24" $730
9.10 BUCKET-DC, 32" $780
9.11 BUCKET-DC, 40" $809
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
9.12 BUCKET-DC, 47" $904
9.13 PINS, BUCKET $91
9.14 BUCKET, 12", 1.7 CFT, HD $810
9.15 BUCKET, 16", 2.5 CFT, HD $844
9.16 BUCKET, 18", 2.9 CFT, HD $905
9.17 BUCKET, 20", 3.3 CFT, HD $961
9.18 BUCKET, 24", 4.2 CFT, HD $1,015
9.19 BUCKET, 30", 5.6 CFT, HD $1,171
9.20 BUCKET-DC, 40" $955
9.21 BUCKET-DC, 47" $973
9.22 BUCKET-DC, 55" $1,070
9.23 PINS,BUCKET $113
9.24 GUARD, OP PROTECTION MESH $556
9.25 A14B AUGER, DRIVE UNIT $2,255
9.26 A19B AUGER, DRIVE UNIT $2,822
9.27 EXTENSION, AUGER 12" $140
9.28 EXTENSION, AUGER 24" $187
9.29 BUCKET - TILTING, DC, 47" $3,140
9.30 CVP16 COMULTI-PURPOSEACTOR PLATE $5,142
9.31 BLADE, BACKFILL $658
9.32 BRACKET, MOUNTING $752
9.33 BRACKET, SWIVEL $1,182
9.34 LINES, CONNECTOR $568
9.35 COUPLER, PG, MANUAL, DUAL LOCK $1,222
10.0 Planer:
Use this section to offer planer options.
10.1 COLD PLANER, PC104B $11,683
10.2 COLD PLANER, PC203 $12,233
10.3 COLD PLANER PC205B $14,720
10.4 COLD PLANER, PC205 $16,149
10.5 COLD PLANER, PC306B REQUIRES XPS HYDRAULICS $20,516
10.6 COLD PLANER, PC310B REQUIRES XPS HYDRAULICS $26,891
10.7 COLD PLANER, PC408B REQUIRES XHP HYDRAULICS $22,712
10.8 COLD PLANER, PC412B REQUIRES XHP HYDRAULICS $29,179
10.9 KIT, WATER SPRINKLER $267
11.0 Snow Plow:
Use this section to offer snow plow options.
11.1 ANGLE BLADE, 72" $2,830
11.2 ANGLE BLADE, 84" $3,016
11.3 KIT, SNOW AND IMULTI-PURPOSEACT, 72" $553
11.4 KIT, SNOW AND IMULTI-PURPOSEACT, 84" $553
11.5 SNOW PUSH, SSL, STD DTY 8' $7,260
11.6 SNOW PUSH, SSL, STD DTY 10' $7,985
11.7 SNOW PUSH, SSL, STD DTY 12' $8,494
11.8 SNOW PUSH, SSL, STD DTY 15' $8,965
12.0 Hydraulic breaker:
Use this section to offer hydraulic breaker options.
12.1 H55E HAMMER WITH SSL MOUNTS 11,330.00$
12.2 H65E HAMMER WITH SSL MOUNTS 15,200.00$
13.0 Grapple:
Use this section to offer grapple options.
13.1 FORKS, INDUSTRIAL GRAPPLE, 66" $5,420
13.2 FORKS, INDUSTRIAL GRAPPLE, 72" $6,467
13.3 FORKS, UTILITY GRAPPLE, 66" $2,273
13.4 FORKS, UTILITY GRAPPLE, 72" $2,411
13.5 BUCKET, INDUSTRIAL GRAPPLE, 60" BASE $3,944
13.6 BUCKET, INDUSTRIAL GRAPPLE, 60" BOLT ON CUTTING EDGE $4,107
13.7 BUCKET, INDUSTRIAL GRAPPLE, 66" BASE $4,137
13.8 BUCKET, INDUSTRIAL GRAPPLE, 66" BOLT ON CUTTING EDGE $4,309
13.9 BUCKET, INDUSTRIAL GRAPPLE, 72" BASE $4,625
13.10 BUCKET, INDUSTRIAL GRAPPLE, 72" BOLT ON CUTTING EDGE $4,824
13.11 BUCKET, INDUSTRIAL GRAPPLE 78" BASE $5,114
13.12 BUCKET, INDUSTRIAL GRAPPLE, 78" BOLT ON CUTTING EDGE $5,306
13.13 RAKE, INDUSTRIAL GRAPPLE, 72" $3,660
13.14 RAKE, INDUSTRIAL GRAPPLE, 84" $4,098
13.15 BUCKET, UTILITY GRAPPLE, 66" $2,810
13.16 BUCKET, UTILITY GRAPPLE 72" $3,034
13.17 UTILITY GRAPPLE $1,215
14.0 Landscape:
Use this section to offer landscape options.
14.1 BRUSHCUTTER, BR160, 60" $5,483
14.2 BRUSHCUTTER, BR166, 66" $5,738
14.3 BRUSHCUTTER, BR172, 72" $5,992
14.4 BRUSHCUTTER, BR272, 72" HF $6,248
14.5 BRUSHCUTTER, BR272, 72" HF $6,248
14.6 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.7 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.8 LANDSCAPE RAKE, LR15B $7,142
14.9 LANDSCAPE RAKE, LR18B $7,779
14.10 LANDSCAPE TILLER, LT13B $5,470
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
14.11 LANDSCAPE TILLER, LT18B $6,584
14.12 MULCHER, HM312, CARBIDE TEETH REQUIRES XPS $20,629
14.13 MULCHER, HM315B, CARBIDE TEETH REQUIRES XPS $30,545
14.14 MULCHER, HM415B, CARBIDE TEETH REQUIRES XHP $31,933
14.15 GUARD, MANUAL COUPLER $52
14.16 POWER BOX RAKE-HYDRAULIC,PR172 $9,408
14.17 POWER BOX RAKE-HYDRAULIC,PR172 $9,406
14.18 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.19 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.20 POWER BOX RAKE-HYDRAULIC,PR190 $10,727
14.21 POWER BOX RAKE-HYDRAULIC,PR190 $10,726
14.22 POWER BOX RAKE-MANUAL, PR172 $9,019
14.23 POWER BOX RAKE-MANUAL, PR184 $9,335
14.24 STUMP GRINDER, SG16B $7,759
14.25 STUMP GRINDER, SG16B $7,763
14.26 STUMP GRINDER, SG18B $8,610
14.27 TRENCHER, T6B, MANUAL,NO CHAIN $4,264
14.28 TRENCHER,T6B, MAN. 6" STANDARD $4,754
14.29 TRENCHER,T6B, MAN. 8" STD $4,873
14.30 TRENCHER, T6B, MAN. 6" COMBO $4,995
14.31 TRENCHER, T6B,MAN 6" ROCKFROST $5,237
14.32 TRENCHER,T6B, MAN 6"TERMINATOR $5,484
14.33 TRENCHER, T6B, HYD, NO CHAIN $4,863
14.34 TRENCHER, T6B,HYD. 6" STANDARD $5,350
14.35 TRENCHER, T6B, HYD. 8" STD $5,470
14.36 TRENCHER, T6B, HYD 6" COMBO $5,592
14.37 TRENCHER, T6B,HYD 6" ROCKFROST $5,837
14.38 TRENCHER,T6B, HYD 6"TERMINATOR $6,080
14.39 TRENCHER, T9B, MANUAL,NO CHAIN $4,593
14.40 TRENCHER, T9B,MAN. 6" STANDARD $4,900
14.41 TRENCHER, T9B, MAN. 6" COMBO $6,539
14.42 TRENCHER, T9B,MAN 6" ROCKFROST $7,085
14.43 TRENCHER, T9B, HYD, NO CHAIN $5,205
14.44 TRENCHER, T9B,HYD. 6" STANDARD $5,430
14.45 TRENCHER, T9B, HYD. 8" STD. $6,143
14.46 TRENCHER, T9B, HYD. 6" COMBO $7,152
14.47 TRENCHER, T9B,HYD 6" ROCKFROST $7,525
14.48 TRENCHER, T15B, HF, NO CHAIN $7,680
14.49 TRENCHER, T15B, HF 6" STANDARD $8,440
14.50 TRENCHER, T15B, HF 8" STD. $9,720
14.51 TRENCHER, T15B, HF COMBO $11,475
14.52 CRUMBER ARM 36" $264
14.53 CRUMBER ARM 48" $293
14.54 CRUMBER ARM 60" $266
14.55 SHOE, CRUMBER ARM 6" - 8" $94
14.56 SHOE, CRUMBER ARM 10" - 12" $102
15.0 Grader:
Use this section to offer grader options.
15.1 BLADE, DOZER, 6-WAY, 79" $5,924
15.2 BLADE, DOZER, 6-WAY, 79" $5,924
15.3 BLADE, DOZER, 6-WAY, 92" $6,508
15.4 BLADE, DOZER, 6-WAY, 92" $6,508
16.0 Auger:
Use this section to offer auger options.
16.1 AUGER, A14B $2,218
16.2 AUGER, A19B $2,632
16.3 AUGER, A26B, HF $4,204
16.4 AUGER, A26B, HF $4,204
16.5 BIT, AUGER 6" $283
16.6 BIT, AUGER 9" $453
16.7 BIT, AUGER 12" $554
16.8 BIT, AUGER 15" STANDARD $637
16.9 BIT, AUGER 18" $734
16.10 BIT, AUGER 24" $919
16.11 BIT, AUGER 30" $1,026
16.12 BIT, AUGER 36" $1,427
16.13 BIT, AUGER 6" INDUSTRIAL $447
16.14 BIT, AUGER 9" INDUSTRIAL $531
16.15 BIT, AUGER 12" INDUSTRIAL $605
16.16 BIT, AUGER 16" INDUSTRIAL $891
16.17 BIT, AUGER 18" INDUSTRIAL $917
16.18 BIT, AUGER 24" INDUSTRIAL $1,209
16.19 TREE BIT, AUGER 24" $838
16.20 TREE BIT, AUGER 36" $1,312
16.21 ROCK HEAD, 6" BOLT-ON $255
16.22 ROCK HEAD, 9" BOLT-ON $320
16.23 ROCK DRILL HEAD, 12" STANDARD $383
16.24 ROCK HEAD, 15" BOLT-ON $447
16.25 ROCK DRILL HEAD, 18" STANDARD $510
16.26 ROCK DRILL HEAD, 24" STANDARD $669
16.27 ADAPTER, AUGER - HEX TO ROUND $157
16.28 ADAPTER, AUGER - ROUND TO HEX $134
16.29 EXTENSION, TELESCOPING 3' $320
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
16.30 EXTENSION, TELESCOPING 6' $541
16.31 EXTENSION, AUGER 12" $140
16.32 EXTENSION, AUGER 24" $187
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WHEEL SAW, SW45, 8" $24,522
17.2 WHEEL SAW, SW60, 6" $27,527
17.3 WHEEL SAW, SW345B, 3" $22,599
17.4 WHEEL SAW, SW360B, 3" $25,376
17.5 WHEEL SAW, SW360B, 6" $27,144
17.6 WHEEL SAW, SW360B, 8" $29,336
17.7 WHEEL SAW, SW460B, 3" $32,209
17.8 WHEEL SAW, SW460B, 6" $32,849
17.9 WHEEL SAW, SW460B, 8" $34,220
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 VIBRATORY COMPACTOR, CV16B $11,064
18.2 VIBRATORY COMPACTOR, CV18B $11,864
19.0 Other:Use this section to offer any other option not already covered.
19.1 KIT KL - WKTL CVRSN TO 3-LINES $136
19.2 KIT KN - WKTL CVRSN TO 3-LINES $136
19.3 KIT KP - WKTL CVRSN TO 3-LINES $136
19.4 KIT, W/T CONV, PLANER & SAW $1,389
19.5 KIT KX - WKTL CVRSN TO 3-LINES $1,705
19.6 KIT KY - WKTL CVRSN TO 3-LINES $1,688
19.7 KIT KZ - WKTL CVRSN TO 3-LINES $1,894
19.8 KIT KS - WKTL CVRSN TO 5-LINES $316
19.9 KIT KA - WKTL CVRSN TO XHP $136
19.10 KIT KB - WKTL CVRSN TO XHP $200
19.11 KIT KC - WKTL CVRSN TO XHP $200
19.12 KIT KD - WKTL CVRSN TO XHP $200
19.13 KIT KE - WKTL CVRSN TO XHP $253
19.14 KIT KF - WKTL CVRSN TO XHP $139
19.15 KIT KG - WKTL CVRSN TO XHP $253
19.16 KIT KH - WKTL CVRSN TO XHP $253
19.17 KIT KJ - WKTL CVRSN TO XHP $253
19.18 KIT KK - WKTL CVRSN TO XHP $253
19.19 KIT KM - WKTL CVRSN TO XHP $136
19.20 KIT KR - WKTL CVRSN TO XHP $136
19.21 TANK, WATER, B-SERIES MACHINES $1,617
19.22 TANK, WATER $1,617
19.23 ARM, MATERIAL HANDLING $1,536
19.24 S305 HYDRAULIC SCRAP SHEAR $31,268
20.0 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options,(Specify years, miles or hours extended term covers.)
20.1 2 YEAR/2000 HOUR Powertrain 680.00$
20.2 2 YEAR/2000 HOUR Powertrain + Hydraulics 900.00$
20.3 2 YEAR/2000 HOUR Premier 1,570.00$
20.4 3 YEAR/3000 HOUR Powertrain 1,790.00$
20.5 3 YEAR/3000 HOUR Powertrain + Hydraulics 2,390.00$
20.6 3 YEAR/3000 HOUR Premier 4,170.00$
20.7 4 YEAR/4000 HOUR Powertrain 2,840.00$
20.8 5 YEAR/5000 HOUR Powertrain 4,500.00$
20.9 *does not include travel charges
20.10 *see attached warranty statement
21.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment
Hourly Rental Rate: 24.00$ Weekly Rental Rate: 500.00$
Monthly Rental Rate: 1,500.00$ Percent (%) of Rental Fee applied to purchase price: 85%
If the new rental equipment is purchased and financed
Charges are applicable for the actual rental term only.State the actual interest rate here: ________________
22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM(See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price $15.00
23.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 0% (See Special Terms and Conditions)
24.0 DELIVERY STARTING POINT - City, State, Zip Nearest Ziegler Location (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $2.50
25.0 INSTALLATION - PER HOUR (Hourly Shop Rate):Installation services may be requested on an "as needed" basis - see Special Terms and Conditions.) 118.00$
26.0 PRICE FOR SERVICE MANUAL 680.00$
27.0 PRICE FOR PARTS MANUAL 65.00$
28.0 PRICE FOR OPERATIONS MANUAL 65.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Price quote for: Skid Steers
Vendor Name: Ziegler Inc.
Contact Person: Jeff Schmidt
Street Address: 901 West 94th Street
P.O. Box:
City, State, Zip Bloomington, MN 55420
Phone #: 952-888-4121
Toll Free #: 800-352-2812
Fax #: 952-887-5820
Email Address: [email protected]
1997-2003
Spec # Information Requested Answer
1.0 MAKE AND MODEL Caterpillar 272D XHP
Engine Type and SAE net HP Yes
Tier 4 Compliant? (Y/N) Caterpillar C3.8 / 106 HP
Length w/o attachments 124.3 in.
Height with operator cab 84.5 in.
Ground clearance 10.1 in.
Maximum height to bucket hinge pin 128.6 in.
Breakout force 7,348 lbs. - tilt
Reach at maximum height 30 in.
Dump angle at maximum height 52 degrees
Dump height with standard bucket 95.7 in.
Front clearance circle with standard bucket 90.8 in.
Rear clearance circle 73.7 in.
Tipping load - SAE rated 7,400 lbs.
Rated operating capacity - SAE 3,700 lbs.
Standard bucket capacity - SAE heaped rating .62 cu yd.
Operating weight - SAE rated 9,137 lbs.
Travel speed 1 speed 7.2 mph 2 speed 10.3 mph
Fuel tank capacity 32.2 gallons
Cold weather starting assist yes-glow plugs
Battery CCA 880 CCA
Alternator size - amps 100 Amp
Transmission type Hydrostatic
Tire / Track size / width TIRES, 14 X 17.5 14PR CAT
Final drive chains and drive method #100 pre-stressed chain Direct sprocket
to chain drive
Final drive chain adjustment / maintenance 500 Hours
Gauges / instrumentationGauges: fuel level, hour meter Instrumentation:
Engine coolant temperature, engine oil
pressure, hydraulic oil temperature
Pump type - GPM and PSI Gear/23 GPM/3335 PSI
Control valves Hydraulic 3 section
Hydraulic oil cooler Included - air to oil
Drive controls Electro/Hydraulic - hand controls
Lift and tilt controls Electro/Hydraulic - hand controls
Engine speed control Both foot and hand control
Work lights - front Included 2 each
Version of Excel used:
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Information Requested Answer
Work lights - rear Included 2 each
Standard Warranty: Months, hours, years, etc. 1 year, Unlimited hour parts/labor
BASE UNIT PRICE: $ 56,600.00
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1.0 Price for base unit: 56,600.00$
2.0 Skid Steer Options:
Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab
etc.. These options should be for skid steer power unit and not attachments.
2.1 PRESSURIZED CAB, HEATER/DEFROSTER, AIR CONDITIONING & DOOR -$
2.3 AIR SUSPENSION SEAT-CLOTH -$
2.5 ELECTRIC WORK TOOL CONTROL -$
2.6 TWO SPEED CONTROL -$
2.7 ELECTRIC QUICK COUPLER 680.00$
2.8 BEACON LIGHT 150.00$
2.9 LIFTING EYE 4 POINT 140.00$
2.10 FOPS, LEVEL 2 2,200.00$
2.11 COUNTERWEIGHT, MACHINE EXTERNAL -$
2.12 RIDE CONTROL -$
2.14 ADVANCED DISPLAY WITH BACKUP CAMERA -$
2.15 HIGH FLOW HYDRAULICS XHP -$
2.16 RADIO READY 110.00$
2.17 RADIO AM-FM, CD, BLUETOOTH 350.00$
2.18 PATTERN CHANGER 1,350.00$
2.19 CASE DEDICATED CONTROLS 450.00$
2.20 DUAL SELF-LEVELING -$
2.21 EXTRA HEAVY DUTY 1000 CCA BATTERY -$
2.22 RETURN TO DIG/ WORKTOOL POSITIONER -$
2.23 OIL, HYDRAULIC, COLD OPERATION 460.00$
2.24 PAINT, CUSTOM 880.00$
2.25 DOOR, CAB, POLYCARBONATE 150.00$
2.26 PROPORTIONAL HYDRAULICS -$
2.27 PRODUCT LINK, CELLULAR, PL421 470.00$
2.39 TIRES, 14 X 17.5 14PR CAT, XD 1,660.00$
2.40 TIRES, 14 X 17.5 14PR CAT -$
3.0 Bucket Options:
Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 BUCKET-GENERAL PURPOSE, BASE EDGE 60" $861
3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" $1,042
3.3 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 60" $1,238
3.4 BUCKET-GENERAL PURPOSE, BASE EDGE 66" $1,175
3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" $1,382
3.6 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 66" $1,549
3.7 BUCKET-GENERAL PURPOSE, BASE EDGE 72" $1,275
3.8 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" $1,533
3.9 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 72" $1,630
3.10 BUCKET-GENERAL PURPOSE, BASE EDGE 78" $1,389
3.11 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" $1,624
3.12 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 78" $1,733
3.13 BUCKET-GENERAL PURPOSE, BASE EDGE 84" $1,511
3.14 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" $1,769
3.15 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 84" $1,891
3.16 BUCKET-DIRT, BOLT ON CUTTING EDGE 54" $788
3.17 BUCKET-DIRT, BOLT ON CUTTING EDGE 60" $896
3.18 BUCKET-DIRT, BOLT ON CUTTING EDGE 66" $1,077
3.19 BUCKET-DIRT, BOLT ON CUTTING EDGE 72" $1,134
3.20 BUCKET-DIRT, BOLT ON CUTTING EDGE 78" $1,250
3.21 BUCKET-LIGHT MATERIAL, BASE EDGE 72" $1,407
3.22 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" $1,630
3.23 BUCKET-LIGHT MATERIAL, BASE EDGE 78" $1,494
3.24 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" $1,733
3.25 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" $1,820
3.26 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" $1,981
3.27 BUCKET-MULTI-PURPOSE, BASE EDGE, 60" $3,600
3.28 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" $3,751
3.29 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" $3,965
3.30 BUCKET-MULTI-PURPOSE, BASE EDGE 66" $3,764
3.31 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" $3,931
3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" $4,133
3.33 BUCKET-MULTI-PURPOSE, BASE EDGE 72" $4,233
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" $4,425
3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" $4,597
3.36 BUCKET-MULTI-PURPOSE, BASE EDGE 78" $4,535
3.37 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" $4,724
3.38 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" $4,766
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
3.39 BUCKET-MULTI-PURPOSE, BASE EDGE 84" $4,854
3.40 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" $5,054
3.41 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" $5,098
3.42 BUCKET-UTILITY, BASE EDGE 60" $985
3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" $1,161
3.44 BUCKET-UTILITY, BASE EDGE 66" $1,221
3.45 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" $1,376
3.46 BUCKET-UTILITY, BASE EDGE 72" $1,407
3.47 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" $1,584
4.0 Overtire tracks:
Use this section to offer overtire tracks.
4.1
4.2
5.0 Pallet forks:
Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 FORKS, 36" PALLET W/ CARRIAGE 915.00$
5.2 FORKS, 42" PALLET W/ CARRIAGE 961.00$
5.3 FORKS, 48" PALLET W/ CARRIAGE 1,019.00$
5.4 FORKS, UTILITY, 66" 926.00$
5.5 FORKS, UTILITY, 66" 932.00$
5.6 FORKS, UTILITY, 72" 1,058.00$
5.7 FORKS, UTILITY, 72" 1,070.00$
6.0 Adaptor plate:
Use this section to offer adaptor plate options.
6.1 Universal Adapter Plate 210.00$
7.0 Snowblower:
Use this section to offer snowblower options.
7.1 SNOW BLOWER, SR117, 67" 7,280.00$
7.2 SNOW BLOWER, SR118, 73" 8,077.00$
7.3 SNOW BLOWER, SR121, 85" 8,438.00$
7.4 SNOW BLOWER, SR318, 73" XPS REQUIRED 8,720.00$
7.5 SNOW BLOWER, SR321, 85" XPS REQUIRED 9,263.00$
8.0 Sweeper:
Use this section to offer sweeper options.
8.1 BROOM, MANUAL ANGLE, BA18 $6,574
8.2 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.3 BROOM, HYDRAULIC ANGLE, BA18 $8,398
8.4 KIT, WATER SPRINKLER $790
8.5 KIT, DEFLECTOR $424
8.6 BROOM, PICKUP, BP15B $6,152
8.7 BROOM, PICKUP, BP18B $7,033
8.8 BRACKET, BROOM B & C SERIES FOR BP BROOMS $239
8.9 BROOM, UTILITY, BU115 $4,407
8.10 BROOM, UTILITY, BU118 $4,790
8.11 BRUSH, GUTTER, B-SERIES $2,356
8.12 MOUNTING BRACKET, NOZZLE Kit of 4 $200
8.13 KIT, WATER SPRINKLER FOR BP BROOMS $209
8.14 KIT, WATER TANK, BROOM FOR BU BROOMS $758
8.15 KIT, WATER SPRINKLER FOR BA18 $790
9.0 Backhoe:
Use this section to offer backhoe options.
9.1 BACKHOE, BH150 $14,988
9.2 BACKHOE, BH160 W/ AUXILIARY $16,187
9.3 GROUP, BACKHOE MOUNTING $1,375
9.4 BUCKET-DIG, 10" $653
9.5 BUCKET-DIG, 12" $588
9.6 BUCKET-DIG, 16" $617
9.7 BUCKET-DIG, 18" $619
9.8 BUCKET-DIG, 20" $692
9.9 BUCKET-DIG, 24" $730
9.10 BUCKET-DC, 32" $780
9.11 BUCKET-DC, 40" $809
9.12 BUCKET-DC, 47" $904
9.13 PINS, BUCKET $91
9.14 BUCKET, 12", 1.7 CFT, HD $810
9.15 BUCKET, 16", 2.5 CFT, HD $844
9.16 BUCKET, 18", 2.9 CFT, HD $905
9.17 BUCKET, 20", 3.3 CFT, HD $961
9.18 BUCKET, 24", 4.2 CFT, HD $1,015
9.19 BUCKET, 30", 5.6 CFT, HD $1,171
9.20 BUCKET-DC, 40" $955
9.21 BUCKET-DC, 47" $973
9.22 BUCKET-DC, 55" $1,070
9.23 PINS,BUCKET $113
9.24 GUARD, OP PROTECTION MESH $556
9.25 A14B AUGER, DRIVE UNIT $2,255
9.26 A19B AUGER, DRIVE UNIT $2,822
9.27 EXTENSION, AUGER 12" $140
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
9.28 EXTENSION, AUGER 24" $187
9.29 BUCKET - TILTING, DC, 47" $3,140
9.30 CVP16 COMULTI-PURPOSEACTOR PLATE $5,142
9.31 BLADE, BACKFILL $658
9.32 BRACKET, MOUNTING $752
9.33 BRACKET, SWIVEL $1,182
9.34 LINES, CONNECTOR $568
9.35 COUPLER, PG, MANUAL, DUAL LOCK $1,222
10.0 Planer:
Use this section to offer planer options.
10.1 COLD PLANER, PC104B $11,683
10.2 COLD PLANER, PC203 $12,233
10.3 COLD PLANER PC205B $14,720
10.4 COLD PLANER, PC205 $16,149
10.5 COLD PLANER, PC306B REQUIRES XPS HYDRAULICS $20,516
10.6 COLD PLANER, PC310B REQUIRES XPS HYDRAULICS $26,891
10.7 COLD PLANER, PC408B REQUIRES XHP HYDRAULICS $22,712
10.8 COLD PLANER, PC412B REQUIRES XHP HYDRAULICS $29,179
10.9 KIT, WATER SPRINKLER $267
11.0 Snow Plow:
Use this section to offer snow plow options.
11.1 ANGLE BLADE, 72" $2,830
11.2 ANGLE BLADE, 84" $3,016
11.3 KIT, SNOW AND IMULTI-PURPOSEACT, 72" $553
11.4 KIT, SNOW AND IMULTI-PURPOSEACT, 84" $553
11.5 SNOW PUSH, SSL, STD DTY 8' $7,260
11.6 SNOW PUSH, SSL, STD DTY 10' $7,985
11.7 SNOW PUSH, SSL, STD DTY 12' $8,494
11.8 SNOW PUSH, SSL, STD DTY 15' $8,965
12.0 Hydraulic breaker:
Use this section to offer hydraulic breaker options.
12.1 H55E HAMMER WITH SSL MOUNTS 11,330.00$
12.2 H65E HAMMER WITH SSL MOUNTS 15,200.00$
13.0 Grapple:
Use this section to offer grapple options.
13.1 FORKS, INDUSTRIAL GRAPPLE, 66" $5,420
13.2 FORKS, INDUSTRIAL GRAPPLE, 72" $6,467
13.3 FORKS, UTILITY GRAPPLE, 66" $2,273
13.4 FORKS, UTILITY GRAPPLE, 72" $2,411
13.5 BUCKET, INDUSTRIAL GRAPPLE, 60" BASE $3,944
13.6 BUCKET, INDUSTRIAL GRAPPLE, 60" BOLT ON CUTTING EDGE $4,107
13.7 BUCKET, INDUSTRIAL GRAPPLE, 66" BASE $4,137
13.8 BUCKET, INDUSTRIAL GRAPPLE, 66" BOLT ON CUTTING EDGE $4,309
13.9 BUCKET, INDUSTRIAL GRAPPLE, 72" BASE $4,625
13.10 BUCKET, INDUSTRIAL GRAPPLE, 72" BOLT ON CUTTING EDGE $4,824
13.11 BUCKET, INDUSTRIAL GRAPPLE 78" BASE $5,114
13.12 BUCKET, INDUSTRIAL GRAPPLE, 78" BOLT ON CUTTING EDGE $5,306
13.13 RAKE, INDUSTRIAL GRAPPLE, 72" $3,660
13.14 RAKE, INDUSTRIAL GRAPPLE, 84" $4,098
13.15 BUCKET, UTILITY GRAPPLE, 66" $2,810
13.16 BUCKET, UTILITY GRAPPLE 72" $3,034
13.17 UTILITY GRAPPLE $1,215
14.0 Landscape:
Use this section to offer landscape options.
14.1 BRUSHCUTTER, BR160, 60" $5,483
14.2 BRUSHCUTTER, BR166, 66" $5,738
14.3 BRUSHCUTTER, BR172, 72" $5,992
14.4 BRUSHCUTTER, BR272, 72" HF $6,248
14.5 BRUSHCUTTER, BR272, 72" HF $6,248
14.6 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.7 BRUSHCUTTER, BR378, 78" HF,XPS $7,524
14.8 LANDSCAPE RAKE, LR15B $7,142
14.9 LANDSCAPE RAKE, LR18B $7,779
14.10 LANDSCAPE TILLER, LT13B $5,470
14.11 LANDSCAPE TILLER, LT18B $6,584
14.12 MULCHER, HM312, CARBIDE TEETH REQUIRES XPS $20,629
14.13 MULCHER, HM315B, CARBIDE TEETH REQUIRES XPS $30,545
14.14 MULCHER, HM415B, CARBIDE TEETH REQUIRES XHP $31,933
14.15 GUARD, MANUAL COUPLER $52
14.16 POWER BOX RAKE-HYDRAULIC,PR172 $9,408
14.17 POWER BOX RAKE-HYDRAULIC,PR172 $9,406
14.18 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.19 POWER BOX RAKE-HYDRAULIC,PR184 $9,948
14.20 POWER BOX RAKE-HYDRAULIC,PR190 $10,727
14.21 POWER BOX RAKE-HYDRAULIC,PR190 $10,726
14.22 POWER BOX RAKE-MANUAL, PR172 $9,019
14.23 POWER BOX RAKE-MANUAL, PR184 $9,335
14.24 STUMP GRINDER, SG16B $7,759
14.25 STUMP GRINDER, SG16B $7,763
14.26 STUMP GRINDER, SG18B $8,610
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
14.27 TRENCHER, T6B, MANUAL,NO CHAIN $4,264
14.28 TRENCHER,T6B, MAN. 6" STANDARD $4,754
14.29 TRENCHER,T6B, MAN. 8" STD $4,873
14.30 TRENCHER, T6B, MAN. 6" COMBO $4,995
14.31 TRENCHER, T6B,MAN 6" ROCKFROST $5,237
14.32 TRENCHER,T6B, MAN 6"TERMINATOR $5,484
14.33 TRENCHER, T6B, HYD, NO CHAIN $4,863
14.34 TRENCHER, T6B,HYD. 6" STANDARD $5,350
14.35 TRENCHER, T6B, HYD. 8" STD $5,470
14.36 TRENCHER, T6B, HYD 6" COMBO $5,592
14.37 TRENCHER, T6B,HYD 6" ROCKFROST $5,837
14.38 TRENCHER,T6B, HYD 6"TERMINATOR $6,080
14.39 TRENCHER, T9B, MANUAL,NO CHAIN $4,593
14.40 TRENCHER, T9B,MAN. 6" STANDARD $4,900
14.41 TRENCHER, T9B, MAN. 6" COMBO $6,539
14.42 TRENCHER, T9B,MAN 6" ROCKFROST $7,085
14.43 TRENCHER, T9B, HYD, NO CHAIN $5,205
14.44 TRENCHER, T9B,HYD. 6" STANDARD $5,430
14.45 TRENCHER, T9B, HYD. 8" STD. $6,143
14.46 TRENCHER, T9B, HYD. 6" COMBO $7,152
14.47 TRENCHER, T9B,HYD 6" ROCKFROST $7,525
14.48 TRENCHER, T15B, HF, NO CHAIN $7,680
14.49 TRENCHER, T15B, HF 6" STANDARD $8,440
14.50 TRENCHER, T15B, HF 8" STD. $9,720
14.51 TRENCHER, T15B, HF COMBO $11,475
14.52 CRUMBER ARM 36" $264
14.53 CRUMBER ARM 48" $293
14.54 CRUMBER ARM 60" $266
14.55 SHOE, CRUMBER ARM 6" - 8" $94
14.56 SHOE, CRUMBER ARM 10" - 12" $102
15.0 Grader:
Use this section to offer grader options.
15.1 BLADE, DOZER, 6-WAY, 79" $5,924
15.2 BLADE, DOZER, 6-WAY, 79" $5,924
15.3 BLADE, DOZER, 6-WAY, 92" $6,508
15.4 BLADE, DOZER, 6-WAY, 92" $6,508
16.0 Auger:
Use this section to offer auger options.
16.1 AUGER, A14B $2,218
16.2 AUGER, A19B $2,632
16.3 AUGER, A26B, HF $4,204
16.4 AUGER, A26B, HF $4,204
16.5 BIT, AUGER 6" $283
16.6 BIT, AUGER 9" $453
16.7 BIT, AUGER 12" $554
16.8 BIT, AUGER 15" STANDARD $637
16.9 BIT, AUGER 18" $734
16.10 BIT, AUGER 24" $919
16.11 BIT, AUGER 30" $1,026
16.12 BIT, AUGER 36" $1,427
16.13 BIT, AUGER 6" INDUSTRIAL $447
16.14 BIT, AUGER 9" INDUSTRIAL $531
16.15 BIT, AUGER 12" INDUSTRIAL $605
16.16 BIT, AUGER 16" INDUSTRIAL $891
16.17 BIT, AUGER 18" INDUSTRIAL $917
16.18 BIT, AUGER 24" INDUSTRIAL $1,209
16.19 TREE BIT, AUGER 24" $838
16.20 TREE BIT, AUGER 36" $1,312
16.21 ROCK HEAD, 6" BOLT-ON $255
16.22 ROCK HEAD, 9" BOLT-ON $320
16.23 ROCK DRILL HEAD, 12" STANDARD $383
16.24 ROCK HEAD, 15" BOLT-ON $447
16.25 ROCK DRILL HEAD, 18" STANDARD $510
16.26 ROCK DRILL HEAD, 24" STANDARD $669
16.27 ADAPTER, AUGER - HEX TO ROUND $157
16.28 ADAPTER, AUGER - ROUND TO HEX $134
16.29 EXTENSION, TELESCOPING 3' $320
16.30 EXTENSION, TELESCOPING 6' $541
16.31 EXTENSION, AUGER 12" $140
16.32 EXTENSION, AUGER 24" $187
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WHEEL SAW, SW45, 8" $24,522
17.2 WHEEL SAW, SW60, 6" $27,527
17.3 WHEEL SAW, SW345B, 3" $22,599
17.4 WHEEL SAW, SW360B, 3" $25,376
17.5 WHEEL SAW, SW360B, 6" $27,144
17.6 WHEEL SAW, SW360B, 8" $29,336
17.7 WHEEL SAW, SW460B, 3" $32,209
17.8 WHEEL SAW, SW460B, 6" $32,849
17.9 WHEEL SAW, SW460B, 8" $34,220
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 VIBRATORY COMPACTOR, CV16B $11,064
18.2 VIBRATORY COMPACTOR, CV18B $11,864
19.0 Other:Use this section to offer any other option not already covered.
19.1 KIT KL - WKTL CVRSN TO 3-LINES $136
19.2 KIT KN - WKTL CVRSN TO 3-LINES $136
19.3 KIT KP - WKTL CVRSN TO 3-LINES $136
19.4 KIT, W/T CONV, PLANER & SAW $1,389
19.5 KIT KX - WKTL CVRSN TO 3-LINES $1,705
19.6 KIT KY - WKTL CVRSN TO 3-LINES $1,688
19.7 KIT KZ - WKTL CVRSN TO 3-LINES $1,894
19.8 KIT KS - WKTL CVRSN TO 5-LINES $316
19.9 KIT KA - WKTL CVRSN TO XHP $136
19.10 KIT KB - WKTL CVRSN TO XHP $200
19.11 KIT KC - WKTL CVRSN TO XHP $200
19.12 KIT KD - WKTL CVRSN TO XHP $200
19.13 KIT KE - WKTL CVRSN TO XHP $253
19.14 KIT KF - WKTL CVRSN TO XHP $139
19.15 KIT KG - WKTL CVRSN TO XHP $253
19.16 KIT KH - WKTL CVRSN TO XHP $253
19.17 KIT KJ - WKTL CVRSN TO XHP $253
19.18 KIT KK - WKTL CVRSN TO XHP $253
19.19 KIT KM - WKTL CVRSN TO XHP $136
19.20 KIT KR - WKTL CVRSN TO XHP $136
19.21 TANK, WATER, B-SERIES MACHINES $1,617
19.22 TANK, WATER $1,617
19.23 ARM, MATERIAL HANDLING $1,536
19.24 S305 HYDRAULIC SCRAP SHEAR $31,268
20.0 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options,(Specify years, miles or hours extended term covers.)
20.1 2 YEAR/2000 HOUR Powertrain 680.00$
20.2 2 YEAR/2000 HOUR Powertrain + Hydraulics 900.00$
20.3 2 YEAR/2000 HOUR Premier 1,570.00$
20.4 3 YEAR/3000 HOUR Powertrain 1,790.00$
20.5 3 YEAR/3000 HOUR Powertrain + Hydraulics 2,390.00$
20.6 3 YEAR/3000 HOUR Premier 4,170.00$
20.7 4 YEAR/4000 HOUR Powertrain 2,840.00$
20.8 5 YEAR/5000 HOUR Powertrain 4,500.00$
20.9 *does not include travel charges
20.10 *see attached warranty statement
21.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment
Hourly Rental Rate: 26.00$
Weekly Rental Rate: 700.00$
Monthly Rental Rate: 2,000.00$
Percent (%) of Rental Fee applied to purchase price: 85%
If the new rental equipment is purchased and financed
Charges are applicable for the actual rental term only.State the actual interest rate here: ________________
22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM(See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price $17.00
23.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 0% (See Special Terms and Conditions)
24.0 DELIVERY STARTING POINT - City, State, Zip Nearest Ziegler Location (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $2.50
25.0 INSTALLATION - PER HOUR (Hourly Shop Rate):Installation services may be requested on an "as needed" basis - see Special Terms and Conditions.) 118.00$
26.0 PRICE FOR SERVICE MANUAL 680.00$
27.0 PRICE FOR PARTS MANUAL 65.00$
28.0 PRICE FOR OPERATIONS MANUAL 65.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Price quote for: Skid Steers
Vendor Name: Ziegler Inc.
Contact Person: Jeff Schmidt
Street Address: 901 West 94th Street
P.O. Box:
City, State, Zip Bloomington, MN 55420
Phone #: 952-888-4121
Toll Free #: 800-352-2812
Fax #: 952-887-5820
Email Address: [email protected]
1997-2003
Spec # Information Requested Answer
1.0 MAKE AND MODEL Caterpillar 226B3
Engine Type and SAE net HP Cat C2.2T diesel 56 HP
Tier 4 Compliant? (Y/N) yes
Length w/o attachments 8 ft. 3 in
Height with operator cab 6 ft. 5 in.
Ground clearance 8 in
Maximum height to bucket hinge pin 9 ft. 4 in
Breakout force 4084 lb. Tilt
Reach at maximum height 1 ft. 8 in
Dump angle at maximum height 40 degrees
Dump height with standard bucket 7 ft. 1 in.
Front clearance circle with standard bucket 6 ft. 4 in.
Rear clearance circle 4 ft. 10 in.
Tipping load - SAE rated 3000 lbs.
Rated operating capacity - SAE 1500 lbs.
Standard bucket capacity - SAE heaped rating .47 cu. yd.
Operating weight - SAE rated 5834 lbs.
Travel speed 7.7 miles per hour
Fuel tank capacity 17 gallons
Cold weather starting assist Yes - glow plug
Battery CCA 650 CCA
Alternator size - amps 85 amp
Transmission type Hydrostatic - closed loop axial Piston
Tire / Track size / width 10 x 16.5 8PR CAT
Final drive chains and drive method #80 pre-stressed chain Direct sprocket to chain
drive
Final drive chain adjustment / maintenance 500 Hours
Gauges / instrumentation Gauges: fuel level, hour meter Instrumentation:
Engine coolant temperature, engine oil pressure,
hydraulic oil temperature
Pump type - GPM and PSI Gear/15.6 GPM/3335 PSI
Control valves Hydraulic 3 section
Hydraulic oil cooler Included -air to oil
Version of Excel used:
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Information Requested Answer
Drive controls Pilot operated - hand control
Lift and tilt controls Pilot operated - hand control
Engine speed control Both foot and hand control
Work lights - front Included 2 each
Work lights - rear Included 2 each
Standard Warranty: Months, hours, years, etc. 1 year 1500 hour parts/labor
BASE UNIT PRICE: $ 25,500.00
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1.0 Price for base unit: 25,500.00$
2.0 Skid Steer Options:
Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab
etc.. These options should be for skid steer power unit and not attachments.
2.1 Cab, Heater/Defroster & Door 1,840.00$
2.2 Electric Work Tool Control 310.00$
2.3 Hydraulic Quick Coupler 710.00$
2.4 Demand Cooling Fan 200.00$
2.5 High Flow Hydraulics 1,720.00$
2.6 Proportional Hydraulic Controls -$
2.7 Beacon Light 160.00$
2.8 Air Conditioning 1,380.00$
2.9 Lifting Eye - Single 310.00$
2.10 Lifting Eye 4 Point 140.00$
2.11 FOPS, Level 2 650.00$
2.12 Counterweight, Machine 380.00$
2.13 Engine Block Heater -$
2.14 Cold Operation Hydraulic Oil 410.00$
2.15 Vinyl Suspension Seat -$
2.16 Self-Leveling -$
2.17 Headliner -$
2.18 Top and Rear Window -$
2.19 Floormat -$
2.20 Polycarbonate Cab Door 710.00$
2.21 Custom Paint 710.00$
2.22 TIRES - 60" RIMS, SET OF 4 (ADD TO STANDARD TIRES/RIMS) -$
2.23 10x16.5 8 PR Cat 320.00$
2.24 TIRES, 10 X 16.5 8PR GALAXY 340.00$
2.25 10 X 16.5 10PR CAT, XD 770.00$
2.26 31 X 6 X 10 CAT, FLXPRT 2,310.00$
2.27 TIRES 66" RIMS (SET OF 4, ADD TO STANDARD TIRES/RIMS) -$
2.28 10x16.5 8 PR Cat -$
2.29 TIRES, 10 X 16.5 10PR CAT, XD 770.00$
2.30 31 X 6 X 10 CAT, FLXPRT 2,310.00$
2.31 10x16.5 8PR Galaxy 320.00$
2.32 31 - 15.5x16.5 8PR CAT 1,050.00$
2.33 SPARE TIRES - 60" RIMS (SET OF 2) -$
2.34 Spare, 10 X 16.5 8PR CAT 60 890.00$
2.35 Spare 10x16.5 8PR Galaxy 1,040.00$
2.36 SPARE TIRES - 66" RIMS (SET OF 2) -$
2.37 Spare, 10 X 16.5 8PR CAT 66 920.00$
2.38 Spare 10x16.5 8PR Galaxy 1,250.00$
2.39 Spare 31-15.5x16.5 8PR CAT 1,410.00$
3.0 Bucket Options:
Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 BUCKET-GENERAL PURPOSE, BASE EDGE 60" 861.00$
3.2 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 60" 1,042.00$
3.3 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 60" 1,238.00$
3.4 BUCKET-GENERAL PURPOSE, BASE EDGE 66" 1,175.00$
3.5 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 66" 1,382.00$
3.6 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 66" 1,549.00$
3.7 BUCKET-GENERAL PURPOSE, BASE EDGE 72" 1,275.00$
3.8 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 72" 1,533.00$
3.9 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 72" 1,630.00$
3.10 BUCKET-GENERAL PURPOSE, BASE EDGE 78" 1,389.00$
3.11 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 78" 1,624.00$
3.12 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 78" 1,733.00$
3.13 BUCKET-GENERAL PURPOSE, BASE EDGE 84" 1,511.00$
3.14 BUCKET-GENERAL PURPOSE, BOLT ON CUTTING EDGE 84" 1,769.00$
3.15 BUCKET-GENERAL PURPOSE, BOLT ON TEETH 84" 1,891.00$
3.16 BUCKET-DIRT, BOLT ON CUTTING EDGE 54" 788.00$
3.17 BUCKET-DIRT, BOLT ON CUTTING EDGE 60" 896.00$
3.18 BUCKET-DIRT, BOLT ON CUTTING EDGE 66" 1,077.00$
3.19 BUCKET-DIRT, BOLT ON CUTTING EDGE 72" 1,134.00$
3.20 BUCKET-DIRT, BOLT ON CUTTING EDGE 78" 1,250.00$
3.21 BUCKET-LIGHT MATERIAL, BASE EDGE 72" 1,407.00$
3.22 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 72" 1,630.00$
3.23 BUCKET-LIGHT MATERIAL, BASE EDGE 78" 1,494.00$
3.24 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 78" 1,733.00$
3.25 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 84" 1,820.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
3.26 BUCKET-LIGHT MATERIAL, BOLT ON CUTTING EDGE 96" 1,981.00$
3.27 BUCKET-MULTI-PURPOSE, BASE EDGE, 60" 3,600.00$
3.28 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE, 60" 3,751.00$
3.29 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 60" 3,965.00$
3.30 BUCKET-MULTI-PURPOSE, BASE EDGE 66" 3,764.00$
3.31 BUCKET-MULTI-PURPOSE, W/BO EDGE 66" 3,931.00$
3.32 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 66" 4,133.00$
3.33 BUCKET-MULTI-PURPOSE, BASE EDGE 72" 4,233.00$
3.34 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 72" 4,425.00$
3.35 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 72" 4,597.00$
3.36 BUCKET-MULTI-PURPOSE, BASE EDGE 78" 4,535.00$
3.37 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 78" 4,724.00$
3.38 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 78" 4,766.00$
3.39 BUCKET-MULTI-PURPOSE, BASE EDGE 84" 4,854.00$
3.40 BUCKET-MULTI-PURPOSE, BOLT ON CUTTING EDGE 84" 5,054.00$
3.41 BUCKET-MULTI-PURPOSE, BOLT ON TEETH 84" 5,098.00$
3.42 BUCKET-UTILITY, BASE EDGE 60" 985.00$
3.43 BUCKET-UTILITY, BOLT ON CUTTING EDGE 60" 1,161.00$
3.44 BUCKET-UTILITY, BASE EDGE 66" 1,221.00$
3.45 BUCKET-UTILITY, BOLT ON CUTTING EDGE 66" 1,376.00$
3.46 BUCKET-UTILITY, BASE EDGE 72" 1,407.00$
3.47 BUCKET-UTILITY, BOLT ON CUTTING EDGE 72" 1,584.00$
4.0 Overtire tracks:
Use this section to offer overtire tracks.
4.1
4.2
5.0 Pallet forks:
Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 FORKS, 36" PALLET W/ CARRIAGE 915.00$
5.2 FORKS, 42" PALLET W/ CARRIAGE 961.00$
5.3 FORKS, 48" PALLET W/ CARRIAGE 1,019.00$
5.4 FORKS, UTILITY, 66" 926.00$
5.5 FORKS, UTILITY, 66" 932.00$
5.6 FORKS, UTILITY, 72" 1,058.00$
5.7 FORKS, UTILITY, 72" 1,070.00$
6.0 Adaptor plate:
Use this section to offer adaptor plate options.
6.1 Universal Adapter Plate 210.00$
7.0 Snowblower:
Use this section to offer snowblower options.
7.1 SNOW BLOWER, SR117, 67" 7,280.00$
7.2 SNOW BLOWER, SR118, 73" 8,077.00$
7.3 SNOW BLOWER, SR121, 85" 8,438.00$
7.4 SNOW BLOWER, SR318, 73" XPS REQUIRED 8,720.00$
7.5 SNOW BLOWER, SR321, 85" XPS REQUIRED 9,263.00$
8.0 Sweeper:
Use this section to offer sweeper options.
8.1 BROOM, MANUAL ANGLE, BA18 6,574.00$
8.2 BROOM, HYDRAULIC ANGLE, BA18 8,398.00$
8.3 BROOM, HYDRAULIC ANGLE, BA18 8,398.00$
8.4 KIT, WATER SPRINKLER 790.00$
8.5 KIT, DEFLECTOR 424.00$
8.6 BROOM, PICKUP, BP15B 6,152.00$
8.7 BROOM, PICKUP, BP18B 7,033.00$
8.8 BRACKET, BROOM B & C SERIES FOR BP BROOMS 239.00$
8.9 BROOM, UTILITY, BU115 4,407.00$
8.10 BROOM, UTILITY, BU118 4,790.00$
8.11 BRUSH, GUTTER, B-SERIES 2,356.00$
8.12 MOUNTING BRACKET, NOZZLE Kit of 4 200.00$
8.13 KIT, WATER SPRINKLER FOR BP BROOMS 209.00$
8.14 KIT, WATER TANK, BROOM FOR BU BROOMS 758.00$
8.15 KIT, WATER SPRINKLER FOR BA18 790.00$
9.0 Backhoe:
Use this section to offer backhoe options.
9.1 BACKHOE, BH150 14,988.00$
9.2 BACKHOE, BH160 W/ AUXILIARY 16,187.00$
9.3 GROUP, BACKHOE MOUNTING 1,375.00$
9.4 BUCKET-DIG, 10" 653.00$
9.5 BUCKET-DIG, 12" 588.00$
9.6 BUCKET-DIG, 16" 617.00$
9.7 BUCKET-DIG, 18" 619.00$
9.8 BUCKET-DIG, 20" 692.00$
9.9 BUCKET-DIG, 24" 730.00$
9.10 BUCKET-DC, 32" 780.00$
9.11 BUCKET-DC, 40" 809.00$
9.12 BUCKET-DC, 47" 904.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
9.13 PINS, BUCKET 91.00$
9.14 BUCKET, 12", 1.7 CFT, HD 810.00$
9.15 BUCKET, 16", 2.5 CFT, HD 844.00$
9.16 BUCKET, 18", 2.9 CFT, HD 905.00$
9.17 BUCKET, 20", 3.3 CFT, HD 961.00$
9.18 BUCKET, 24", 4.2 CFT, HD 1,015.00$
9.19 BUCKET, 30", 5.6 CFT, HD 1,171.00$
9.20 BUCKET-DC, 40" 955.00$
9.21 BUCKET-DC, 47" 973.00$
9.22 BUCKET-DC, 55" 1,070.00$
9.23 PINS,BUCKET 113.00$
9.24 GUARD, OP PROTECTION MESH 556.00$
9.25 A14B AUGER, DRIVE UNIT 2,255.00$
9.26 A19B AUGER, DRIVE UNIT 2,822.00$
9.27 EXTENSION, AUGER 12" 140.00$
9.28 EXTENSION, AUGER 24" 187.00$
9.29 BUCKET - TILTING, DC, 47" 3,140.00$
9.30 CVP16 COMULTI-PURPOSEACTOR PLATE 5,142.00$
9.31 BLADE, BACKFILL 658.00$
9.32 BRACKET, MOUNTING 752.00$
9.33 BRACKET, SWIVEL 1,182.00$
9.34 LINES, CONNECTOR 568.00$
9.35 COUPLER, PG, MANUAL, DUAL LOCK 1,222.00$
10.0 Planer:
Use this section to offer planer options.
10.1 COLD PLANER, PC104B 11,683.00$
10.2 COLD PLANER, PC203 12,233.00$
10.3 COLD PLANER PC205B 14,720.00$
10.4 COLD PLANER, PC205 16,149.00$
10.5 COLD PLANER, PC306B REQUIRES XPS HYDRAULICS 20,516.00$
10.6 COLD PLANER, PC310B REQUIRES XPS HYDRAULICS 26,891.00$
10.7 COLD PLANER, PC408B REQUIRES XHP HYDRAULICS 22,712.00$
10.8 COLD PLANER, PC412B REQUIRES XHP HYDRAULICS 29,179.00$
10.9 KIT, WATER SPRINKLER 267.00$
11.0 Snow Plow:
Use this section to offer snow plow options.
11.1 ANGLE BLADE, 72" 2,830.00$
11.2 ANGLE BLADE, 84" 3,016.00$
11.3 KIT, SNOW AND IMULTI-PURPOSEACT, 72" 553.00$
11.4 KIT, SNOW AND IMULTI-PURPOSEACT, 84" 553.00$
11.5 SNOW PUSH, SSL, STD DTY 8' 7,260.00$
11.6 SNOW PUSH, SSL, STD DTY 10' 7,985.00$
11.7 SNOW PUSH, SSL, STD DTY 12' 8,494.00$
11.8 SNOW PUSH, SSL, STD DTY 15' 8,965.00$
12.0 Hydraulic breaker:
Use this section to offer hydraulic breaker options.
12.1 H55E HAMMER WITH SSL MOUNTS 11,330.00$
12.2 H65E HAMMER WITH SSL MOUNTS 15,200.00$
13.0 Grapple:
Use this section to offer grapple options.
13.1 FORKS, INDUSTRIAL GRAPPLE, 66" 5,420.00$
13.2 FORKS, INDUSTRIAL GRAPPLE, 72" 6,467.00$
13.3 FORKS, UTILITY GRAPPLE, 66" 2,273.00$
13.4 FORKS, UTILITY GRAPPLE, 72" 2,411.00$
13.5 BUCKET, INDUSTRIAL GRAPPLE, 60" BASE 3,944.00$
13.6 BUCKET, INDUSTRIAL GRAPPLE, 60" BOLT ON CUTTING EDGE 4,107.00$
13.7 BUCKET, INDUSTRIAL GRAPPLE, 66" BASE 4,137.00$
13.8 BUCKET, INDUSTRIAL GRAPPLE, 66" BOLT ON CUTTING EDGE 4,309.00$
13.9 BUCKET, INDUSTRIAL GRAPPLE, 72" BASE 4,625.00$
13.10 BUCKET, INDUSTRIAL GRAPPLE, 72" BOLT ON CUTTING EDGE 4,824.00$
13.11 BUCKET, INDUSTRIAL GRAPPLE 78" BASE 5,114.00$
13.12 BUCKET, INDUSTRIAL GRAPPLE, 78" BOLT ON CUTTING EDGE 5,306.00$
13.13 RAKE, INDUSTRIAL GRAPPLE, 72" 3,660.00$
13.14 RAKE, INDUSTRIAL GRAPPLE, 84" 4,098.00$
13.15 BUCKET, UTILITY GRAPPLE, 66" 2,810.00$
13.16 BUCKET, UTILITY GRAPPLE 72" 3,034.00$
13.17 UTILITY GRAPPLE 1,215.00$
14.0 Landscape:
Use this section to offer landscape options.
14.1 BRUSHCUTTER, BR160, 60" 5,483.00$
14.2 BRUSHCUTTER, BR166, 66" 5,738.00$
14.3 BRUSHCUTTER, BR172, 72" 5,992.00$
14.4 BRUSHCUTTER, BR272, 72" HF 6,248.00$
14.5 BRUSHCUTTER, BR272, 72" HF 6,248.00$
14.6 BRUSHCUTTER, BR378, 78" HF,XPS 7,524.00$
14.7 BRUSHCUTTER, BR378, 78" HF,XPS 7,524.00$
14.8 LANDSCAPE RAKE, LR15B 7,142.00$
14.9 LANDSCAPE RAKE, LR18B 7,779.00$
14.10 LANDSCAPE TILLER, LT13B 5,470.00$
14.11 LANDSCAPE TILLER, LT18B 6,584.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
14.12 MULCHER, HM312, CARBIDE TEETH REQUIRES XPS 20,629.00$
14.13 MULCHER, HM315B, CARBIDE TEETH REQUIRES XPS 30,545.00$
14.14 MULCHER, HM415B, CARBIDE TEETH REQUIRES XHP 31,933.00$
14.15 GUARD, MANUAL COUPLER 52.00$
14.16 POWER BOX RAKE-HYDRAULIC,PR172 9,408.00$
14.17 POWER BOX RAKE-HYDRAULIC,PR172 9,406.00$
14.18 POWER BOX RAKE-HYDRAULIC,PR184 9,948.00$
14.19 POWER BOX RAKE-HYDRAULIC,PR184 9,948.00$
14.20 POWER BOX RAKE-HYDRAULIC,PR190 10,727.00$
14.21 POWER BOX RAKE-HYDRAULIC,PR190 10,726.00$
14.22 POWER BOX RAKE-MANUAL, PR172 9,019.00$
14.23 POWER BOX RAKE-MANUAL, PR184 9,335.00$
14.24 STUMP GRINDER, SG16B 7,759.00$
14.25 STUMP GRINDER, SG16B 7,763.00$
14.26 STUMP GRINDER, SG18B 8,610.00$
14.27 TRENCHER, T6B, MANUAL,NO CHAIN 4,264.00$
14.28 TRENCHER,T6B, MAN. 6" STANDARD 4,754.00$
14.29 TRENCHER,T6B, MAN. 8" STD 4,873.00$
14.30 TRENCHER, T6B, MAN. 6" COMBO 4,995.00$
14.31 TRENCHER, T6B,MAN 6" ROCKFROST 5,237.00$
14.32 TRENCHER,T6B, MAN 6"TERMINATOR 5,484.00$
14.33 TRENCHER, T6B, HYD, NO CHAIN 4,863.00$
14.34 TRENCHER, T6B,HYD. 6" STANDARD 5,350.00$
14.35 TRENCHER, T6B, HYD. 8" STD 5,470.00$
14.36 TRENCHER, T6B, HYD 6" COMBO 5,592.00$
14.37 TRENCHER, T6B,HYD 6" ROCKFROST 5,837.00$
14.38 TRENCHER,T6B, HYD 6"TERMINATOR 6,080.00$
14.39 TRENCHER, T9B, MANUAL,NO CHAIN 4,593.00$
14.40 TRENCHER, T9B,MAN. 6" STANDARD 4,900.00$
14.41 TRENCHER, T9B, MAN. 6" COMBO 6,539.00$
14.42 TRENCHER, T9B,MAN 6" ROCKFROST 7,085.00$
14.43 TRENCHER, T9B, HYD, NO CHAIN 5,205.00$
14.44 TRENCHER, T9B,HYD. 6" STANDARD 5,430.00$
14.45 TRENCHER, T9B, HYD. 8" STD. 6,143.00$
14.46 TRENCHER, T9B, HYD. 6" COMBO 7,152.00$
14.47 TRENCHER, T9B,HYD 6" ROCKFROST 7,525.00$
14.48 TRENCHER, T15B, HF, NO CHAIN 7,680.00$
14.49 TRENCHER, T15B, HF 6" STANDARD 8,440.00$
14.50 TRENCHER, T15B, HF 8" STD. 9,720.00$
14.51 TRENCHER, T15B, HF COMBO 11,475.00$
14.52 CRUMBER ARM 36" 264.00$
14.53 CRUMBER ARM 48" 293.00$
14.54 CRUMBER ARM 60" 266.00$
14.55 SHOE, CRUMBER ARM 6" - 8" 94.00$
14.56 SHOE, CRUMBER ARM 10" - 12" 102.00$
15.0 Grader:
Use this section to offer grader options.
15.1 BLADE, DOZER, 6-WAY, 79" 5,924.00$
15.2 BLADE, DOZER, 6-WAY, 79" 5,924.00$
15.3 BLADE, DOZER, 6-WAY, 92" 6,508.00$
15.4 BLADE, DOZER, 6-WAY, 92" 6,508.00$
16.0 Auger:
Use this section to offer auger options.
16.1 AUGER, A14B 2,218.00$
16.2 AUGER, A19B 2,632.00$
16.3 AUGER, A26B, HF 4,204.00$
16.4 AUGER, A26B, HF 4,204.00$
16.5 BIT, AUGER 6" 283.00$
16.6 BIT, AUGER 9" 453.00$
16.7 BIT, AUGER 12" 554.00$
16.8 BIT, AUGER 15" STANDARD 637.00$
16.9 BIT, AUGER 18" 734.00$
16.10 BIT, AUGER 24" 919.00$
16.11 BIT, AUGER 30" 1,026.00$
16.12 BIT, AUGER 36" 1,427.00$
16.13 BIT, AUGER 6" INDUSTRIAL 447.00$
16.14 BIT, AUGER 9" INDUSTRIAL 531.00$
16.15 BIT, AUGER 12" INDUSTRIAL 605.00$
16.16 BIT, AUGER 16" INDUSTRIAL 891.00$
16.17 BIT, AUGER 18" INDUSTRIAL 917.00$
16.18 BIT, AUGER 24" INDUSTRIAL 1,209.00$
16.19 TREE BIT, AUGER 24" 838.00$
16.20 TREE BIT, AUGER 36" 1,312.00$
16.21 ROCK HEAD, 6" BOLT-ON 255.00$
16.22 ROCK HEAD, 9" BOLT-ON 320.00$
16.23 ROCK DRILL HEAD, 12" STANDARD 383.00$
16.24 ROCK HEAD, 15" BOLT-ON 447.00$
16.25 ROCK DRILL HEAD, 18" STANDARD 510.00$
16.26 ROCK DRILL HEAD, 24" STANDARD 669.00$
16.27 ADAPTER, AUGER - HEX TO ROUND 157.00$
16.28 ADAPTER, AUGER - ROUND TO HEX 134.00$
16.29 EXTENSION, TELESCOPING 3' 320.00$
16.30 EXTENSION, TELESCOPING 6' 541.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
16.31 EXTENSION, AUGER 12" 140.00$
16.32 EXTENSION, AUGER 24" 187.00$
SEQ # 727-713
Tractors: Skid Steers Attachments
T-631(5)
STATE OF MINNESOTA
PRICING PAGE - METHOD # 1(Typed Responses Required)
August 21, 2013
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WHEEL SAW, SW45, 8" 24,522.00$
17.2 WHEEL SAW, SW60, 6" 27,527.00$
17.3 WHEEL SAW, SW345B, 3" 22,599.00$
17.4 WHEEL SAW, SW360B, 3" 25,376.00$
17.5 WHEEL SAW, SW360B, 6" 27,144.00$
17.6 WHEEL SAW, SW360B, 8" 29,336.00$
17.7 WHEEL SAW, SW460B, 3" 32,209.00$
17.8 WHEEL SAW, SW460B, 6" 32,849.00$
17.9 WHEEL SAW, SW460B, 8" 34,220.00$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 VIBRATORY COMPACTOR, CV16B 11,064.00$
18.2 VIBRATORY COMPACTOR, CV18B 11,864.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 KIT KL - WKTL CVRSN TO 3-LINES 136.00$
19.2 KIT KN - WKTL CVRSN TO 3-LINES 136.00$
19.3 KIT KP - WKTL CVRSN TO 3-LINES 136.00$
19.4 KIT, W/T CONV, PLANER & SAW 1,389.00$
19.5 KIT KX - WKTL CVRSN TO 3-LINES 1,705.00$
19.6 KIT KY - WKTL CVRSN TO 3-LINES 1,688.00$
19.7 KIT KZ - WKTL CVRSN TO 3-LINES 1,894.00$
19.8 KIT KS - WKTL CVRSN TO 5-LINES 316.00$
19.9 KIT KA - WKTL CVRSN TO XHP 136.00$
19.10 KIT KB - WKTL CVRSN TO XHP 200.00$
19.11 KIT KC - WKTL CVRSN TO XHP 200.00$
19.12 KIT KD - WKTL CVRSN TO XHP 200.00$
19.13 KIT KE - WKTL CVRSN TO XHP 253.00$
19.14 KIT KF - WKTL CVRSN TO XHP 139.00$
19.15 KIT KG - WKTL CVRSN TO XHP 253.00$
19.16 KIT KH - WKTL CVRSN TO XHP 253.00$
19.17 KIT KJ - WKTL CVRSN TO XHP 253.00$
19.18 KIT KK - WKTL CVRSN TO XHP 253.00$
19.19 KIT KM - WKTL CVRSN TO XHP 136.00$
19.20 KIT KR - WKTL CVRSN TO XHP 136.00$
19.21 TANK, WATER, B-SERIES MACHINES 1,617.00$
19.22 TANK, WATER 1,617.00$
19.23 ARM, MATERIAL HANDLING 1,536.00$
19.24 S305 HYDRAULIC SCRAP SHEAR 31,268.00$
20.0 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options,(Specify years, miles or hours extended term covers.)
20.1 2 YEAR/2000 HOUR Powertrain 560.00$
20.2 2 YEAR/2000 HOUR Powertrain + Hydraulics 610.00$
20.3 2 YEAR/2000 HOUR Premier 880.00$
20.4 3 YEAR/3000 HOUR Powertrain 1,370.00$
20.5 3 YEAR/3000 HOUR Powertrain + Hydraulics 1,630.00$
20.6 3 YEAR/3000 HOUR Premier 2,350.00$
20.7 4 YEAR/4000 HOUR Powertrain 2,230.00$
20.8 5 YEAR/5000 HOUR Powertrain 3,600.00$
20.9 *does not include travel charges
20.10 *see attached warranty statement
21.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment
Hourly Rental Rate: 18.00$
Weekly Rental Rate: 250.00$
Monthly Rental Rate: 750.00$
Percent (%) of Rental Fee applied to purchase price: 85%
If the new rental equipment is purchased and financed
Charges are applicable for the actual rental term only.State the actual interest rate here: ________________
22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM(See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price 10.00$
23.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 0% (See Special Terms and Conditions)
24.0 DELIVERY STARTING POINT - City, State, Zip Nearest Ziegler Location (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: 2.50$
25.0 INSTALLATION - PER HOUR (Hourly Shop Rate):Installation services may be requested on an "as needed" basis - see Special Terms and Conditions.) 118.00$
26.0 PRICE FOR SERVICE MANUAL 680.00$
27.0 PRICE FOR PARTS MANUAL 65.00$
28.0 PRICE FOR OPERATIONS MANUAL 65.00$