sks atex and iecex approved temperature sensors ex e · updated to iso 9001:2008. sks automaatio...
TRANSCRIPT
Temperature Sensorswith ATEX and IECEx approval, Ex e type
ATEX / INSTRUMENTS
SKS Sensors® is a registered trade mark of SKS Automaatio Oy
Temperature sensorswith ATEX and IECEx approval, Ex e type
Table of contents page
About the manufacturer
SKS Group 3
SKS Automaatio 3
SKS Sensors® 3
General approval information
ATEX certification 4
IECEx certification 4
ISO9001:2008 certification 5
Products and product certificates ATEX IECEx
WT-BAJONETTI-6/XXX-YYYY/TDT-4J-KLA-EX X X 8
2XWT-BAJONETTI-8/XXX-YYYY/TDT-4J-KLA-EX X X 15
WT-KAAPELI-6/XXX-YYYY/TDT-4J-KLA-EX X X 22
WT-KAAPELI-6-XXX-YYYY/SDS-2J-KLA-EX X 29
2XWT-KAAPELI-6/XXX-YYYY/TDT-4J-KLA-EX X X 32
WT-MI-302-6/XXXXX-200/FEP-4J-KLA-EX X 39
WT-MI-302-6-2000-200/FEP-4J-KLA-EX X 42
WT-MI-302-6/1000-200/FEP-4J-KLA-EX X 45
WT-MI-302-3/1000-200/FEP-4J-KLA-EX X 48
W-M-303-3/6/8/SV/XXX-YYY/FDF-4-A-Ex X X 52
T-M-303-3/6/8/SV/XXX-YYY/FDS-Z-1-Ex X X 55
Ex, EX = ATEX and/or IECEx certified sensor typeA, KLA, 1 = sensor element tolerance class
2J, 4, 4J = number of connection wires / resistorZ = thermocouple type
FDF, FDS, FEP, SDS, TDT = connection cable sheath materialYYY, YYYY, 200 = connection cable length mm
XXX, XXXXX, 2000, 1000 = sensor element length mm3, 6, 8, 8/SV = sensor element diameter mm
BAJONETTI, KAAPELI, MI-302, M-303 = sensor structure, designW, WT = 1×Pt100 resistor, 2XWT = 2×Pt100 resistor, T = thermocouple
SKS Sensors® is a registered trade mark of SKS Automaatio Oy
SKS Group
SKS is a comprehensive technical supplier having solid expertise and a comprehensive productrange to be offered to the Finnish automation and machine building industry.
The SKS Group consists of following companies:
· SKS Group Oy (Parent Company)· SKS Automaatio Oy (Automation and Electrical Components)· SKS Connecto Oy (Cable Harness, Design and Assembly Services)· SKS Control Oy (Electric Drives and Motion Control Systems)· SKS Mechatronics Oy (Stage Technology Systems)· SKS Mekaniikka Oy (Mechanical and Power Transmission Components)· SKS Toijala Works Oy (Contract Manufacturing)
· SKS China Co. Ltd. (China)· SKS Connecto Polska Sp. z. o.o (Poland)· SKS Group representative office St. Petersburg (Russia)· SKS Sweden AB (Gears, Sweden)· SKS Tehnika OÜ (Estonia).
The SKS Group turnover in 2015 was 105.3 million EUR with a staff of more than 647 employees.The operations have been ISO 9002 certified since January 1996, presently this certificate isupdated to ISO 9001:2008.
SKS Automaatio
SKS Automaatio Oy is a member of the SKS Group. SKS Automaatio Oy manufactures, imports andsells electrical automation components. In addition to that we offer various services for automationindustry and machine builders. Turnover was 16.9 million EUR in 2015.
Products and servicesOur product groups include Components for Process Automation, Components and Special Cables,Cable Connectors and Connector Systems, Electrification and Control Systems. For the processindustry sector we concentrate on temperature measurement. Our experience of instrumentation isfocused on our own manufacturing of temperature sensors, and all the components needed within.
SKS Sensors®
SKS Automaatio Oy offers state-of-the-art technology for temperature measuring sensormanufacturing. In addition to the wide standard products range we also provide individual, customerspecific total solutions. The principles of our services are fast and high quality deliveries as well ascost-effectiveness and low risk for the customer.
Quality with over 20 years of experienceThe SKS Sensors® temperature sensors are manufactured with uncompromising expertise for the useof the process and machine building industries. SKS Automaatio is a temperature sensormanufacturing pioneer with its 20 years’ experience. The own manufacturing guarantees the shortdelivery times also for the application-specific special sensors, e.g. for our range of the ATEX andIECEx certified, Ex e, Ex t and Ex d type sensors for potentially explosive areas. All demandingprecision welding is performed with the laser welding equipment in the SKS Connecto productionfacilities in Hyvinkää, Finland. Our manufacturing operations are ISO 9001:2008 certified. SKSGroup Oy has acquired an ATEX quality certificate VTT 02 ATEX Q 001 according to the EU directive94/9/EC. Our sensor manufacturing operations are also IECEx Quality Assessment Reported accordingto the standard EN ISO/IEC 800079-34. The IECEx QAR Reference No is FI/VTT/QAR14.0001/02.
Contact info Mr. Seppo Ojanen, email: [email protected] Automaatio Oy, Martinkyläntie 50, P.O. Box 122, FI-01721 Vantaa, FinlandTel. int. +358 20 764 61, Fax int. +358 20 764 6820,E-mail: [email protected], www.skssensors.com
SKS Sensors® is a registered trade mark of SKS Automaatio Oy
Ex e / Ex t Temperature sensors
Ex e - increased safety, for gas zones 1 or 2Ex t - dust-protected enclosure, for dust areas.
· The sensor is an ATEX and/or IECEx-certified,Ex e-type, Pt100 or TC sensor, which can also beused for dust areas, thanks to its dust-protectedEx t enclosure.
· The measuring circuit can be cabled to a safe areaand to a standard device (no ATEX/IECEx requirements).
ATEX
· The SKS Group has been granted an ATEX Quality Assurance Notification (VTT 02 ATEX Q001) asrequired under EU directive 94/9/EC. The notification, issued by VTT Expert Services Ltd., gives theright to manufacture Ex e and Ex t temperature sensors and to assemble Ex d temperature sensors foruse in explosive atmospheres.
· Please find a copy of the notification on our web site: http://www.skssensors.com/en/downloads/
· When ATEX certified sensor types are needed, we will manufacture e.g. Ex II 2 G Ex eb IIC T6-T4 Gb,Ex II 2 D Ex tb IIIC T60…T130°C Db approved sensors.
· Our currently certified products and copies of the product certificates are presented on next pages.· We can manufacture and apply for authorization also for different kind of Ex e-designs, which are to
be individually agreed. Please contact our Ex experts.
IECEx
· The SKS Group's sensor manufacturing operations have been assessed in an IECEx QualityAssessment Report (FI/VTT/QAR14.0001/02) as required by the EN ISO/IEC 80079-34 standard. Theauditing organization was VTT Expert Services Ltd. The report gives the right to manufacture Ex e, Ext and Ex d type temperature sensors for use in explosive atmospheres and to apply for IECEx approvalfor them.
· Please find the IECEx QAR report through our web site: http://www.skssensors.com/en/downloads/
· When IECEx product certified sensor types are needed, we will apply for authorization for existingsensor types or produce new ones. IECEx product certificates are applied for on request.
Place and date:
For the issuing office:
Espoo, 10 November 2015 DNV GL Business Assurance Finland Oy Ab
Kimmo Haarala
Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL BUSINESS ASSURANCE FINLAND OY AB, Keilasatama 5, 02150 Espoo, Finland. TEL:+358 10 292 4200. assurance.dnvgl.com
Certificate No:
110750-2012-AQ-FIN-FINAS
Initial certification date:
12 January 1996 – 6 February 2012
Valid:
10 November 2015 - 15 September 2018
This is to certify that the management system of
SKS Group Oy, SKS Automaatio Oy,
SKS Connecto Oy, SKS Control Oy, SKS Mekaniikka Oy, SKS Toijala Works Oy Martinkyläntie 50, 01720 Vantaa, Finland and the sites as mentioned in the appendix accompanying this certificate
has been found to conform to the Quality Management System standard:
ISO 9001:2008 This certificate is valid for the following scope: Sales and marketing, importing, value adding services, storage and
distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature
sensors, cable harnesses, wire sets, electrifications and busbar trunking systems, manufacturing of welded constructions and system deliveries.
Certificate No: 110750-2012-AQ-FIN-FINAS Place and date: Espoo, 10 November 2015
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL BUSINESS ASSURANCE FINLAND OY AB, Keilasatama 5, 02150 Espoo, Finland. TEL:+358 10 292 4200. assurance.dnvgl.com Page 2 of 3
Appendix to Certificate
SKS Group Oy, SKS Automaatio Oy, SKS Connecto Oy, SKS Control Oy, SKS Mekaniikka Oy, SKS Toijala Works Oy
Locations included in the certification are as follows:
Site Name Site Address Site Scope
SKS Toijala Works Oy (Akaa) Tehtaantie 22, 37800 Akaa, Finland Sales and marketing, importing, value adding services, storage and distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature sensors, cable harnesses, wire sets, electrifications and busbar trunking systems, manufacturing of welded
constructions and system deliveries.
SKS Group Oy, SKS Automaatio Oy, SKS Connecto Oy (Hyvinkää)
Varastokatu 10, 05800 Hyvinkää, Finland
Sales and marketing, importing, value adding services, storage and distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature sensors, cable harnesses, wire sets, electrifications and busbar trunking systems, manufacturing of welded constructions and system deliveries.
SKS Group Oy, SKS Automaatio Oy, SKS Connecto Oy, SKS Control Oy, SKS Mekaniikka Oy (Tampere)
Tammelan Puistokatu 21 A, 33500 Tampere, Finland
Sales and marketing, importing, value adding services, storage and distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature sensors, cable harnesses, wire sets, electrifications and busbar trunking systems, manufacturing of welded constructions and system deliveries.
SKS Group Oy, SKS Automaatio Oy, SKS Mekaniikka Oy (Turku)
Postikatu 2, 20250 Turku, Finland Sales and marketing, importing, value adding services, storage and distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature sensors, cable harnesses, wire sets, electrifications and busbar trunking systems, manufacturing of welded constructions and system deliveries.
Certificate No: 110750-2012-AQ-FIN-FINAS Place and date: Espoo, 10 November 2015
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL BUSINESS ASSURANCE FINLAND OY AB, Keilasatama 5, 02150 Espoo, Finland. TEL:+358 10 292 4200. assurance.dnvgl.com Page 3 of 3
SKS Group Oy, SKS Automaatio Oy, SKS Connecto Oy, SKS Control Oy, SKS Mekaniikka Oy, SKS Toijala Works Oy
Martinkyläntie 50, 01720 Vantaa, Finland
Sales and marketing, importing, value adding services, storage and distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature sensors, cable harnesses, wire sets, electrifications and busbar trunking
systems, manufacturing of welded constructions and system deliveries.
SKS Connecto Oy (Vieremä) Lasertie 7, 74200 Vieremä, Finland Sales and marketing, importing, value adding services, storage and distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature sensors, cable harnesses, wire sets, electrifications and busbar trunking systems, manufacturing of welded constructions and system deliveries.
SKS Toijala Works Oy (Viiala) Lumikintie 7, 37830 Viiala, Finland Sales and marketing, importing, value adding services, storage and distribution of electrical, automation, mechanical and power transmission components, design and service of electrical components, automation components, electric drives and control systems, assembly of temperature sensors, cable harnesses, wire sets, electrifications and busbar trunking systems, manufacturing of welded constructions and system deliveries.
YYYY XXX75
10
ATEX- ja IECEx-merkintä
ATEX- and IECEx-Marking
Pääteholkki-55..+125°C
End sleeve -55..+125°CSuojaholkki
Protection sleeve
Ø6
Kaapeli
Cable
Jousi
Spring
Bajonettihattu
Bayonet cap
200
Suojaholkki
Protection sleeve
AISI 316
Johtimien eristeet
Wire insulation
PTFE -200...+260°C
Ilmaraon eriste
Air gap insulation
Elastomer -50 ...+200°C
Lämmönjohtopasta
Heat conductor paste
-40...+199°C
PT100 IEC 751 Class A
Puristus
Compression
Kaapeli
Cable
FEP-Cu-FEP 4x0,22
-200...+200°C
Jousi
Spring
1xPt100, Luokka A, 2-, 3- ja 4-johdin,
standardin IEC 751 mukaan.
1x Pt100, Class A, 2-, 3- and 4-wire,acc. to standard IEC 751.
θ
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
Valkoinen / White
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / ChkHyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.
SKS Automaatio Oy
Martinkyläntie 50, FI-01720 Vantaa
Tel. +358 20 764 61
Fax +358 20 764 6820
E-mail: [email protected]
4
WT-BAJONETTI-6/XXX-YYYY/TDT-4J-KLA-EX
R.AhonenJ.Mikkonen S.Ojanen 11.03.2014
1059616
A4
AISI 316L
VTT 14 ATEX 005X
IECEx VTT 14.0003X
Muutokset sallittu vain sertifikaatin myöntäjän luvalla
Changes in the drawing are allowed only by the permission of the authorities
who have granted the certificate
Piirustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.) The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila + 200°C
- Maksimi mittausvirta 10 mA
- Sähköinen kytkentä sovelluksen mukaisesti
hyväksyttyyn laitteeseen tai kytkentäkoteloon
kytkentä paikan vaatimusten mukaistesti
- Max operating temperature + 200°C - Max measuring current 10 mA
- Electrical connections to approved unit
according to application or to terminal box
according to requirements at connecting site
YYYY XXX75
10
ATEX- ja IECEx-merkintä
ATEX- and IECEx-Marking
Pääteholkki-55..+125°C
End sleeve -55..+125°CSuojaholkki
Protection sleeve
Ø8
Kaapeli
Cable
Jousi
Spring
Bajonettihattu
Bayonet cap
200
Suojaholkki
Protection sleeve
AISI 316
Johtimien eristeet
Wire insulation
PTFE -200...+260°C
Ilmaraon eriste
Air gap insulation
Elastomer -50 ...+200°C
Lämmönjohtopasta
Heat conductor paste
-40...+199°C
PT100 IEC 751 Class A
Puristus
Compression
Kaapeli
Cable
FEP-Cu-FEP 8x0,22
-200...+200°C
Jousi
Spring
θ
Punainen / Red
Valkoinen / White
θ
Sininen / Blue
Keltainen / Yellow
θ
Punainen / Red
Valkoinen / White
θ
Sininen / Blue
Keltainen / Yellow
Punainen / Red
Sininen / Blue
2xPt100, Luokka A, 2-, 3- ja 4-johdin,
standardin IEC 751 mukaan.
θ
Punainen / Red
Valkoinen / White
θ
Sininen / Blue
Keltainen / Yellow
Punainen / Red
Valkoinen / White
Sininen / Blue
Keltainen / Yellow
2x Pt100, Class A, 2-, 3- and 4-wire,acc. to standard IEC 751.
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / ChkHyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.
SKS Automaatio Oy
Martinkyläntie 50, FI-01720 Vantaa
Tel. +358 20 764 61
Fax +358 20 764 6820
E-mail: [email protected]
4
2XWT-BAJONETTI-8/XXX-YYYY/TDT-4J-KLA-EX
R.AhonenJ.Mikkonen S.Ojanen 11.03.2014
1059620
A4
AISI 316L
VTT 14 ATEX 005X
IECEx VTT 14.0003X
Muutokset sallittu vain sertifikaatin myöntäjän luvalla
Changes in the drawing are allowed only by the permission of the authorities
who have granted the certificate
Piirustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.) The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila + 200°C
- Maksimi mittausvirta 10 mA
- Sähköinen kytkentä sovelluksen mukaisesti
hyväksyttyyn laitteeseen tai kytkentäkoteloon
kytkentä paikan vaatimusten mukaistesti
- Max operating temperature + 200°C - Max measuring current 10 mA
- Electrical connections to approved unit
according to application or to terminal box
according to requirements at connecting site
YYYY XXX75
10
ATEX- ja IECEx-merkintä
ATEX- and IECEx-Marking
Pääteholkki-55..+125°C
End sleeve -55..+125°C
Suojaholkki
Protection sleeve
Ø6
Kaapeli
Cable
Suojaholkki
Protection sleeve
AISI 316
Johtimien eristeet
Wire insulation
PTFE -200...+260°C
Ilmaraon eriste
Air gap insulation
Elastomer -50 ...+200°C
Lämmönjohtopasta
Heat conductor paste
-40...+199°C
PT100 IEC 751 Class A
Puristus
Compression
Kaapeli
Cable
FEP-Cu-FEP 4x0,22
-200...+200°C
1xPt100, Luokka A, 2-, 3- ja 4-johdin,
standardin IEC 751 mukaan.
1x Pt100, Class A, 2-, 3- and 4-wire,acc. to standard IEC 751.
θ
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
Valkoinen / White
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / ChkHyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.
SKS Automaatio Oy
Martinkyläntie 50, FI-01720 Vantaa
Tel. +358 20 764 61
Fax +358 20 764 6820
E-mail: [email protected]
3
WT-KAAPELI-6/XXX-YYYY/TDT-4J-KLA-EX
R.AhonenJ.Mikkonen S.Ojanen 11.03.2014
1061957
A4
AISI 316L
VTT 14 ATEX 004X
IECEx VTT 14.0002X
Muutokset sallittu vain sertifikaatin myöntäjän luvalla
Changes in the drawing are allowed only by the permission of the authorities
who have granted the certificate
Piirustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.) The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila + 200°C
- Maksimi mittausvirta 10 mA
- Sähköinen kytkentä sovelluksen mukaisesti
hyväksyttyyn laitteeseen tai kytkentäkoteloon
kytkentä paikan vaatimusten mukaistesti
- Max operating temperature + 200°C - Max measuring current 10 mA
- Electrical connections to approved unit
according to application or to terminal box
according to requirements at connecting site
YYYY XXX75
10
ATEX- ja IECEx-merkintä
ATEX- and IECEx-Marking
Pääteholkki-55..+125°C
End sleeve -55..+125°C
Suojaholkki
Protection sleeve
Ø6
Kaapeli
Cable
Suojaholkki
Protection sleeve
AISI 316
Johtimien eristeet
Wire insulation
PTFE -200...+260°C
Ilmaraon eriste
Air gap insulation
Elastomer -50 ...+200°C
Lämmönjohtopasta
Heat conductor paste
-40...+199°C
PT100 IEC 751 Class A
Puristus
Compression
Kaapeli
Cable
FEP-Cu-FEP 8x0,22
-200...+200°C
θ
Punainen / Red
Valkoinen / White
θ
Sininen / Blue
Keltainen / Yellow
θ
Punainen / Red
Valkoinen / White
θ
Sininen / Blue
Keltainen / Yellow
Punainen / Red
Sininen / Blue
2xPt100, Luokka A, 2-, 3- ja 4-johdin,
standardin IEC 751 mukaan.
θ
Punainen / Red
Valkoinen / White
θ
Sininen / Blue
Keltainen / Yellow
Punainen / Red
Valkoinen / White
Sininen / Blue
Keltainen / Yellow
2x Pt100, Class A, 2-, 3- and 4-wire,acc. to standard IEC 751.
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / ChkHyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.
SKS Automaatio Oy
Martinkyläntie 50, FI-01720 Vantaa
Tel. +358 20 764 61
Fax +358 20 764 6820
E-mail: [email protected]
3
2XWT-KAAPELI-6/XXX-YYYY/TDT-4J-KLA-EX
R.AhonenJ.Mikkonen S.Ojanen 11.03.2014
1061961
A4
AISI 316L
VTT 14 ATEX 004X
IECEx VTT 14.0002X
Muutokset sallittu vain sertifikaatin myöntäjän luvalla
Changes in the drawing are allowed only by the permission of the authorities
who have granted the certificate
Piirustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.) The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila + 200°C
- Maksimi mittausvirta 10 mA
- Sähköinen kytkentä sovelluksen mukaisesti
hyväksyttyyn laitteeseen tai kytkentäkoteloon
kytkentä paikan vaatimusten mukaistesti
- Max operating temperature + 200°C - Max measuring current 10 mA
- Electrical connections to approved unit
according to application or to terminal box
according to requirements at connecting site
YYY75
10
ATEX- ja IECEx-merkintäATEX- and IECEx-Marking
40 XXX
Holkki -40..+150°CSleeve -40..+150°C
Mi-kaapeliMineral insulated cable
Pääteholkki -55..+125°CEnd sleeve -55..+125°C
Ø6 Ø3
KaapeliCableFDS 2x0,22-60..+180°C
Eristeaine alumiinioksidiAl O - insulation
Eristeaine magnesiumoksidiMgO- insulation
Te-johtimetTe-wires
Mi-kaapeliMineral insulated cable
TermopariThermo coupleEN 584
2
Termopari, Tyyppi N, Luokka 1,standardin IEC 584 mukaan. /Thermocouple, Type N, Class 1,Acc. to standard IEC 584.
Valk. / White
Vaal.pun. / PinkNiCrSi
NiSi Valk. / White
Vihreä / Green
Termopari, Tyyppi K, Luokka 1,standardin IEC 584 mukaan. /Thermocouple, Type K, Class 1,Acc. to standard IEC 584.
NiCr
Ni
Lämpötila-anturi koostuu yhdestätermoparista Z (tyyppi N tai K)Temperature sensor consistone thermocouple Z (type N or K)
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / Chk Hyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.SKS Automaatio OyMartinkyläntie 50, FI-01720 VantaaTel. +358 20 764 61Fax +358 20 764 6820E-mail: [email protected] 0
T-M-303-3/XXX-YYY/FDS-Z-1-EX
J.MikkonenA.Ahonen S.Ojanen 21.03.2016
1258335
A4
Inconel 600
Muutokset sallittu vain sertifikaatin myöntäjän luvallaChanges in the drawing are allowed only by the permission of the authorities who have granted the certificate
Piirrustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.)The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila +900°C hetkellisesti +1100°C- Sähköinen kytkentä sovelluksen mukaisesti hyväksyttyyn laitteeseen tai kytkentäkoteloon kytkentä paikan vaatimusten mukaistesti
- Max operating temperature +900°C hetkellisesti +1100°C- Electrical connections to approved unit according to application or to terminal box according to requirements at connecting site
VTT 16 ATEX 011X, IECEx VTT 16.0006XII 2 G Ex eb IIC T6...T4 Gb II 2 D Ex tb IIIC T60 °C...T130 °C Db
YYY75
10
ATEX- ja IECEx-merkintäATEX- and IECEx-Marking
40 XXX
Holkki -40..+150°CSleeve -40..+150°C
Mi-kaapeliMineral insulated cable
Pääteholkki -55..+125°CEnd sleeve -55..+125°C
Ø8 Ø
6
KaapeliCableFDS 2x0,22-60..+180°C
Eristeaine alumiinioksidiAl O - insulation
Eristeaine magnesiumoksidiMgO- insulation
Te-johtimetTe-wires
Mi-kaapeliMineral insulated cable
TermopariThermo coupleEN 584
2
Termopari, Tyyppi N, Luokka 1,standardin IEC 584 mukaan. /Thermocouple, Type N, Class 1,Acc. to standard IEC 584.
Valk. / White
Vaal.pun. / PinkNiCrSi
NiSi Valk. / White
Vihreä / Green
Termopari, Tyyppi K, Luokka 1,standardin IEC 584 mukaan. /Thermocouple, Type K, Class 1,Acc. to standard IEC 584.
NiCr
Ni
Lämpötila-anturi koostuu yhdestätermoparista Z (tyyppi N tai K)Temperature sensor consistone thermocouple Z (type N or K)
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / Chk Hyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.SKS Automaatio OyMartinkyläntie 50, FI-01720 VantaaTel. +358 20 764 61Fax +358 20 764 6820E-mail: [email protected] 0
T-M-303-6/XXX-YYY/FDS-Z-1-EX
J.MikkonenA.Ahonen S.Ojanen 21.03.2016
1258337
A4
Inconel 600
Muutokset sallittu vain sertifikaatin myöntäjän luvallaChanges in the drawing are allowed only by the permission of the authorities who have granted the certificate
Piirrustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.)The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila +900°C hetkellisesti +1100°C- Sähköinen kytkentä sovelluksen mukaisesti hyväksyttyyn laitteeseen tai kytkentäkoteloon kytkentä paikan vaatimusten mukaistesti
- Max operating temperature +900°C temporarily +1100°C- Electrical connections to approved unit according to application or to terminal box according to requirements at connecting site
VTT 16 ATEX 011X, IECEx VTT 16.0006X II 2 G Ex eb IIC T6...T4 Gb II 2 D Ex tb IIIC T60 °C...T130 °C Db
YYY75
10
ATEX- ja IECEx-merkintäATEX- and IECEx-Marking
40 XXX
Holkki -40..+150°CSleeve -40..+150°C
Mi-kaapeliMineral insulated cable
Pääteholkki -55..+125°CEnd sleeve -55..+125°C
Ø8 Ø
8
KaapeliCableFDS 2x0,22-60..+180°C
40
Eristeaine alumiinioksidiAl O - insulation
Eristeaine magnesiumoksidiMgO- insulation
Te-johtimetTe-wires
Mi-kaapeliMineral insulated cable
TermopariThermo coupleEN 584
2
SuojaholkkiProtection sleeveIncolnel 600
Termopari, Tyyppi N, Luokka 1,standardin IEC 584 mukaan. /Thermocouple, Type N, Class 1,Acc. to standard IEC 584.
Valk. / White
Vaal.pun. / PinkNiCrSi
NiSi Valk. / White
Vihreä / Green
Termopari, Tyyppi K, Luokka 1,standardin IEC 584 mukaan. /Thermocouple, Type K, Class 1,Acc. to standard IEC 584.
NiCr
Ni
Lämpötila-anturi koostuu yhdestätermoparista Z (tyyppi N tai K)Temperature sensor consistone thermocouple Z (type N or K)
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / Chk Hyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.SKS Automaatio OyMartinkyläntie 50, FI-01720 VantaaTel. +358 20 764 61Fax +358 20 764 6820E-mail: [email protected] 0
T-M-303-8/SV/XXX-YYY/FDS-Z-1-EX
J.MikkonenA.Ahonen S.Ojanen 21.03.2016
1258338
A4
Inconel 600
Muutokset sallittu vain sertifikaatin myöntäjän luvallaChanges in the drawing are allowed only by the permission of the authorities who have granted the certificate
Piirrustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.)The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila +900°C hetkellisesti +1100°C- Sähköinen kytkentä sovelluksen mukaisesti hyväksyttyyn laitteeseen tai kytkentäkoteloon kytkentä paikan vaatimusten mukaistesti
- Max operating temperature +900°C temporarily +1100°C- Electrical connections to approved unit according to application or to terminal box according to requirements at connecting site
VTT 16 ATEX 011X, IECEx VTT 16.0006X II 2 G Ex eb IIC T6...T4 Gb II 2 D Ex tb IIIC T60 °C...T130 °C Db
YYY75
10
ATEX- ja IECEx-merkintäATEX- and IECEx-Marking
40 XXX
Holkki -40..+150°CSleeve -40..+150°C
Mi-kaapeliMineral insulated cable
SuojaholkkiProtection sleevePääteholkki -55..+125°C
End sleeve -55..+125°C
Ø6 Ø3
KaapeliCableFDF 4x0,22-240..+205°C
25
Eristeaine alumiinioksidiAl O - insulation
Eristeaine magnesiumoksidiMgO- insulation
Cu-johtimetCu-wires
Laser hitsausLaser welding
SuojaholkkiProtection sleeveAISI 316
Mi-kaapeliMineral insulated cable
2
Pt100 EN 60751
1xPt100, Luokka A, 2-, 3- ja 4-johdin,standardin EN 60751 mukaan.
1x Pt100, Class A, 2-, 3- and 4-wire, acc. to standard EN 60751.
θ
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
Valkoinen / White
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / Chk Hyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.SKS Automaatio OyMartinkyläntie 50, FI-01720 VantaaTel. +358 20 764 61Fax +358 20 764 6820E-mail: [email protected] 0
W-M-303-3/XXX-YYY/FDF-4-A-EX
J.MikkonenA.Ahonen S.Ojanen 21.03.2016
1258122
A4
AISI 316L
Muutokset sallittu vain sertifikaatin myöntäjän luvallaChanges in the drawing are allowed only by the permission of the authorities who have granted the certificate
Piirrustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.)The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila +450°C hetkellisesti +550°C- Maksimi mittausvirta 10 mA- Sähköinen kytkentä sovelluksen mukaisesti hyväksyttyyn laitteeseen tai kytkentäkoteloon kytkentä paikan vaatimusten mukaistesti
- Max operating temperature +450°C temporarily +550°C- Max measurin current 10 mA- Electrical connections to approved unit according to application or to terminal box according to requirements at connecting site
VTT 16 ATEX 011X, IECEx VTT 16.0006X II 2 G Ex eb IIC T6...T4 Gb II 2 D Ex tb IIIC T60 °C...T130 °C Db
YYY75
10
ATEX- ja IECEx-merkintäATEX- and IECEx-Marking
40 XXX
25
Holkki -40..+150°CSleeve -40..+150°C
Mi-kaapeliMineral insulated cable
SuojaholkkiProtection sleevePääteholkki -55..+125°C
End sleeve -55..+125°C
Ø8
Ø6
KaapeliCableFDF 4x0,22-240..+205°C
Eristeaine alumiinioksidiAl O - insulation
Eristeaine magnesiumoksidiMgO- insulation
Cu-johtimetCu-wires
Laser hitsausLaser welding
SuojaholkkiProtection sleeveAISI 316
Mi-kaapeliMineral insulated cable
2
Pt100 EN 60751
1xPt100, Luokka A, 2-, 3- ja 4-johdin,standardin EN 60751 mukaan.
1x Pt100, Class A, 2-, 3- and 4-wire, acc. to standard EN 60751.
θ
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
Valkoinen / White
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / Chk Hyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.SKS Automaatio OyMartinkyläntie 50, FI-01720 VantaaTel. +358 20 764 61Fax +358 20 764 6820E-mail: [email protected] 0
W-M-303-6/XXX-YYY/FDF-4-A-EX
J.MikkonenA.Ahonen S.Ojanen 21.03.2016
1258333
A4
AISI 316L
Muutokset sallittu vain sertifikaatin myöntäjän luvallaChanges in the drawing are allowed only by the permission of the authorities who have granted the certificate
Piirrustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.)The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila +450°C hetkellisesti +550°C- Maksimi mittausvirta 10 mA- Sähköinen kytkentä sovelluksen mukaisesti hyväksyttyyn laitteeseen tai kytkentäkoteloon kytkentä paikan vaatimusten mukaistesti
- Max operating temperature +450°C temporarily +550°C- Max measurin current 10 mA- Electrical connections to approved unit according to application or to terminal box according to requirements at connecting site
VTT 16 ATEX 011X, IECEx VTT 16.0006X II 2 G Ex eb IIC T6...T4 Gb II 2 D Ex tb IIIC T60 °C...T130 °C Db
YYY75
10
ATEX- ja IECEx-merkintäATEX- and IECEx-Marking
40 XXX
Holkki -40..+150°CSleeve -40..+150°C
Mi-kaapeliMineral insulated cable
SuojaholkkiProtection sleevePääteholkki -55..+125°C
End sleeve -55..+125°C
Ø8
Ø8
KaapeliCableFDF 4x0,22-240..+205°C
40
Eristeaine alumiinioksidiAl O - insulation
Eristeaine magnesiumoksidiMgO- insulation
Cu-johtimetCu-wires
Laser hitsausLaser welding
SuojaholkkiProtection sleeveAISI 316
Mi-kaapeliMineral insulated cable
2
Pt100 EN 60751
1xPt100, Luokka A, 2-, 3- ja 4-johdin,standardin EN 60751 mukaan.
1x Pt100, Class A, 2-, 3- and 4-wire, acc. to standard EN 60751.
θ
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
θ
Punainen / Red
Punainen / Red
Valkoinen / White
Valkoinen / White
Tuote / Product Prosessimateriaali(t) / Process Material(s)
Piirt. / Drawn Tark. / Chk Hyväks. -pvm. / Aprvd -Date Suhde / Scal.
Rev.
Koko / Size
Piirustusnro / Drawing No.
Info.SKS Automaatio OyMartinkyläntie 50, FI-01720 VantaaTel. +358 20 764 61Fax +358 20 764 6820E-mail: [email protected] 0
W-M-303-8/SV/XXX-YYY/FDF-4-A-EX
J.MikkonenA.Ahonen S.Ojanen 21.03.2016
1258334
A4
AISI 316L
Muutokset sallittu vain sertifikaatin myöntäjän luvallaChanges in the drawing are allowed only by the permission of the authorities who have granted the certificate
Piirrustus on pätevä dokumentti vain allekirjoitettuna (Tark. ja Hyv.)The drawing is a valid document only with signatures (Chkd. and Appd. )
- Maksimi käyttölämpötila +450°C hetkellisesti +550°C- Maksimi mittausvirta 10 mA- Sähköinen kytkentä sovelluksen mukaisesti hyväksyttyyn laitteeseen tai kytkentäkoteloon kytkentä paikan vaatimusten mukaistesti
- Max operating temperature +450°C temporarily +550°C- Max measurin current 10 mA- Electrical connections to approved unit according to application or to terminal box according to requirements at connecting site
VTT 16 ATEX 011X, IECEx VTT 16.0006X II 2 G Ex eb IIC T6...T4 Gb II 2 D Ex tb IIIC T60 °C...T130 °C Db
Publication version 25.1.2017 Right to changes reserved
SKS Group
SKS Automaatio Oy
SKS Connecto Oy
SKS Control Oy
SKS Mechatronics Oy
SKS Mekaniikka Oy
SKS Toijala Works Oy
SKS Tehnika OÜ (Tallinn, Estonia)
SKS Group Representative Office (St Petersburg, Russia)
SKS China Co. Ltd. (Shanghai, China)
SKS Connecto Polska Sp. z o.o. (Grudziadz, Poland)
SKS Sweden AB (Lomma, Sweden)
SKS Automaatio Oy
Martinkyläntie 50, P.O.Box 122, FI-01721 Vantaa tel. +358 20 764 61, fax +358 20 764 [email protected], www.sks.fi
Southern FinlandMartinkyläntie 50, P.O.Box 122, FI-01721 Vantaa tel. +358 20 764 61, fax +358 20 764 6820
Middle FinlandTammelan puistokatu 21 A, FI-33500 Tamperetel. +358 20 764 7500, fax +358 20 764 7501
Western FinlandPostikatu 2, FI-20250 Turkutel. +358 20 764 7600, fax +358 20 764 7649
Warehouse addressVarastokatu 10, FI-05800 Hyvinkää tel. +358 20 764 61, fax +358 20 764 8355
www.skssensors.com
SKS Sensors® global distributor network
Please visit our web site: http://www.skssensors.com/en/contact/