slash - turf.designslash carved wall tile patent pending let slash direct you on the path to better...
TRANSCRIPT
PAGE 1
SLASHcarved wall tile
PATENT PENDING
Let Slash direct you on the path to better acoustics. The versatile wall tile’s backslash and forward slash styles can be used to create chevrons or diagonal stripes. Made from sound-absorbing PET felt, the carved wall tile is available in TURF’s 9 mm felt colors.
turf.design 844 TURF OMG SLASH PATENT PENDING PAGE 2
SPECSPRODUCTSlash carved wall tile
CONTENTpolyester (PET) felt60% pre-consumer recycled
9MM TILEDIMENSIONS6.375" W x 11.75" H x 9 mm T
FELT THICKNESS9 mm
BEVELED EDGEcarved at a 45˚ angle 4.5 mm from the bottom
FRONT VIEW
H
W
BACK SLASH
FORWARD SLASH
LAYOUTSlash tiles may be configured in a variety of ways using all backslashes, all forward slashes or a combination of both types.
T
SIDE VIEWenlarged edge
07 BLACK
01 CREAM
78 WHEAT
70 AQUA
20 MANGO
94 CORAL
06 CHARCOAL
50 IVORY
82 BARLEY
90 SKY
62 SUNFLOWER
42 ORANGE
38 MATTE GREY
05 WHITE
54 LATTE
25 LIGHT BLUE
45 YELLOW
16 RED
86 SLATE
66 PEWTER
48 LIGHT BROWN
74 DENIM
47 LIME
58 RASPBERRY
98 STORM
04 LIGHT GREY
32 BROWN
29 DARK BLUE
14 GREEN
39 LAVENDER
9MM FELTTURF’s Slash carved wall tile is made with 9mm PET felt board.
The process used to create PET felt often results in a heathered effect where multiple tones are present. Slight variations in color should be expected when using this sustainable material.
Felt thickness is 9mm +/- 0.5 mm.
Monitors and printers vary. Please request a material sample to verify felt colors.
turf.design 844 TURF OMG SLASH PATENT PENDING PAGE 3
turf.design 844 TURF OMG SLASH PATENT PENDING PAGE 4
TECHACOUSTICSASTM C423-17: Type A Mounting
FIRE RATINGASTM E-84 – Class A
VOCASTM D5116 Compliant
ASTM C423-17: Type A Mounting. Carved wall tile NRC varies depending on field conditions and arrangement. Contact TURF for testing details.
1.08
0.96
0.84
0.72
0.60
0.48
0.36
0.12
0.24
4000 Hz2000 Hz1000 Hz500 Hz250 Hz125 Hz
FREQUENCY
SO
UN
D A
BS
OR
BT
ION
CO
EF
FIC
IEN
T
9MM TILE: NRC = 0.25
DETAILSLEAD TIMEships in four (4) weeks
INSTALLATIONSlash is available with or without an adhesive backing. More information is available in the carved wall tile installation instructions.
WARRANTYthree (3) years
MAINTENANCEVacuum occasionally to remove any particulate matter and air-borne debris or dust. Compressed air can be used to dust the material in difficult to reach areas for large assemblies. Use standard household cleaners for spot cleaning.
CUSTOMSlash carved wall tiles may be customized with additional layers and colors. Contact your rep for details.
A manufacturer-applied adhesive backing is available. The pressure-activated backing instantly adheres to a variety of wall surfaces.
Carved wall tiles without an adhesive backing should be installed with a construction-grade adhesive specified by the contractor.
ADHESIVE BACKING CONSTRUCTION ADHESIVE