slide 1 advanced manufacturing systems design iem 5303 2000 john w. nazemetz 1.hook up portable...

AdvancedManufacturing Systems Design

IEM 5303

2000 John W. Nazemetz

Slide 1

1. Hook up Portable Computer (two cables)PC Video out (Second Monitor to side of Table – Aux Computer

(Use Standard 15 pin Connection Cord)PC Video in from Back of RadioShack switch – Use Standard RCA

Plug2. Start Computer, Powerpoint, Netmeeting, PowerPoint (Slideshow)

Reset Cameras so Image Centered, Correctly PositionedReset NetMeeting – “Always on Top”, Image Size and Position

3. Use Preview Touchscreen to toggle cameras/input to Laptop

Pre-Class Checklist Pre-Class Checklist (1)(1)

TVVCR

12

34

TV out to laptop video in

TV1 2 3 4

VCR1 2 3 4

Select 3 (Prev.) to LaptopSelect 2 (Prog.) to Laptop

Select 3 (Prev.) to VCRSelect 2 (Prog.) for VCR

Button -- Radioshack TV 3 to send Preview to Laptop (Head,Students,Remote,Elmo)

Button – Radioshack VCR 3 to send Preview to VCR, 2 to send Prog. To VCR

Toggle VCR 3 -> 2 -> 3 for Streaming Cue


IEM 5303


Slide 2

Pre-Class Checklist (2)Pre-Class Checklist (2)

1. Verify TV to “3” (‘Preview’ to Laptop Video In)

2. Verify VCR to “3” (Laptop Composite Output to VCR)

3. Have Students Verify Camera Auto Points to Them.

4. Call ETS to Notify of Program Start

5. Turn on PLAY and RECORD on VCR

Are YOU Sure It’s On?

6. Click this slide to advance to 30 Second Introduction and Conduct Class


IEM 5303


Slide 3

BEGIN CLASS IN30

SECONDS


IEM 5303


Slide 4

BEGIN CLASS IN20

SECONDS


IEM 5303


Slide 5

BEGIN CLASS IN10

SECONDS


IEM 5303


Slide 6

BEGIN !!!CLICK


IEM 5303


Slide 7

Let’s BeginLet’s Begin

Welcome to Week 14 (The Penultimate)

Agenda

Get Everybody Ready for Presentations Next Week

Discuss Final Exam

Observations from Discussion Threads

Answer Discussion & HW Questions


IEM 5303


Slide 8

Presentation Preparation Presentation Preparation (1)(1)

Delivery Plans and SequenceRemote Studio Origination

GoodyearSteve Daino (Paper Rec’d), Kevin

FergusonOSU-Tulsa

Mike Janitz (Paper Rec’d)Seagate

Dennis McInerney

[Break/Tape Change]

Videotape and Slides Shown by InstructorTom North and Chris Forth

NOTE – Already Received Papers and Slides

Rakesh Pai (?), Mike Blanton (?)


IEM 5303


Slide 9


Delivery Plans and Sequence (cont.)Cordell Studio Origination

Jeff Short (Will Drive In – May move up)

[Break]

Kanagaraj CoimbatoreRahul DeshpandeAbhijit HoraSheng MaJaskaran Singh


IEM 5303


Slide 10


Papers and slides will be posted as received

Slides must be received by Monday Noon and be in supplied format2/3 – 3/4 of Slide => Text1/4 -- 1/3 of Slide => Area for “Talking Head”

Instructor will load, advance slides for remote studios and Cordell studio

Students will be “inset” from studio cameras

Allows Students to Talk Looking at Screen


IEM 5303


Slide 11


Remote Camera Checks (Face at Right)OSU – Tulsa

Mike JanitzGoodyear

Steve Daino and Kevin FergusonSeagate

Dennis McInerneyOSU – Stillwater

Kanagaraj CoimbatoreRahul DespandeAbhijit HoraSheng MaJaskaran Singh


IEM 5303


Slide 12

Look Ahead to Final Exam Look Ahead to Final Exam (1)(1)

FormatSimilar to Mid-term

Open-Ended, Integrative (Systems)Majority of points on material since

MidtermDesign for 120 minutesWill Allow 150 minutes

In Class – 7:15 – 9:45 p.m. Wednesday, December 13, 2000 [Open mike/camera to remote site(s)]

Outside Class – Arrange w/Kristi Horner to Fax you exam, you fax back in 2 ½ hours – Take Between December 8 -14 (Fri. – Thurs.)


IEM 5303


Slide 13


Topics

Pre-Midterm

Post Midterm

“Bridging” Course


IEM 5303


Slide 14


Pre-Midterm Topics

CAD, Geometric Modeling (2, 3)Representations/TransformationsData Exchange to Other Functions

Computer Control of Manufacturing Systems (6, 8) Numerical Control

Programmable Logic ControllersRobotic Systems


IEM 5303


Slide 15


Pre-Midterm TopicsComputer Integrated Manufacturing

Definition -- Key Words/Meanings

Concepts -- Life Cycle Orientation/Viewpoint(s)

Concurrent EngineeringDefinition and GoalsComparison to “Traditional” Computer Aided Process Planning

Variant/Generative/Group Technology

Surface Recognition/Process Association

Concurrent Engineering Process DesignQuality Deployment Function (QFD)Quantitative Analysis -- Singh Model


IEM 5303


Slide 16


Pre-Midterm Topics

Group TechnologyDefinition and PhilosophyCoding StructuresAttributes UsedUse of Database Techniques vs.

CodingFamily and Cell Formation

Production Flow AnalysisSimilarity IndicesProcedures -- Linear

Programming, Vakaria and Wemmerlov


IEM 5303


Slide 17


Pre-Midterm Topics

Cellular ManufacturingDefinition and PhilosophyCell/Family Formation

Flexible Manufacturing SystemsDefinition and PhilosophyDesign Steps

Numerical ControlDefinitions/Terms/TypesRelation/Types of CIM -- Cellular, FMS,

Group Technology, etc.


IEM 5303


Slide 18


Pre- Midterm Topics

RoboticsDefinitions/Terms/TypesUse and Justification of Use

Programmable ControllersDefinition/UseReading/Interpreting Ladder

Diagrams


IEM 5303


Slide 19

Look Ahead to Final Exam (8)Look Ahead to Final Exam (8)

Post-Midterm Topics

Manufacturing Systems Planning and ControlDealing with VariationControl Philosophies (Aggregate, JIT,…)

Material HandlingAGV, ASRS Design

Information ExchangeVirtual OrganizationsMeta-DataMark-up and Semantics


IEM 5303


Slide 20

Look Ahead to Final Exam (9)Look Ahead to Final Exam (9)

Post-Midterm Topics

Information ExchangeSupply ChainInformation System DesignTypes of Data ExchangeStandardized Data Exchange AlternativesInformation/Data Modeling

Historical Perspective and Current Issues


IEM 5303


Slide 21

Advice Advice (How to Do Well)(How to Do Well)

Read the Question

Reread the Question

Organize Answer/Outline in Mind

Select Format for Response

Answer the Question AskedNo Extra Credit for Answers

to Questions not Asked

Proofread and Check


IEM 5303


Slide 22

Discussion QuestionsDiscussion Questions

I am not sure of the exact use of Express Models. Do they have some specific advantages over other database management software?Use – Data model independent of

implementation method

Not a Database Management tool – Input to Database Design/Implementation


IEM 5303


Slide 23

Discussion QuestionsDiscussion Questions

Application Reference Model and Application Activity model use IDEF1X and IDEF0 respectively.Why don't these models use EXPRESS?

EXPRESS is for (detailed) data modeling (entities and relationships)

IDEF shows activities (input, output, controls, resources


IEM 5303


Slide 24

EXPRESS HW ReviewEXPRESS HW Review

Simplified Modeling Concept–

SCHEMA area_of_interest

ENTITY named_conceptrelation_to_other_entities: ONEOF

(express_subtype, express_supertype);role_of_following_in_model: ONEOF (declared_data_type, aggregate_type, simple_data_type);WHERE

rule_name : value_of type_in_role_1 :=:

value_of_type_in_role2;END_ENTITY

END_SCHEMA


IEM 5303


Slide 25

EXPRESS HW Review EXPRESS HW Review (2)(2)

SCHEMA osu_records

ENTITY personsex: ONEOF (male, female);role_at_osu: SET [1,?] (employee, student, applicant, dropout, former_employee, former_student, alumni, dependent)first_name: STRING;last_name: STRING;

WHEREsame_person :

employee_number :=: student_id;END_ENTITY;

ENTITY maleSUBTYPE OF (person);wife: OPTIONAL female;

END_ENTITY;


IEM 5303


Slide 26


ENTITY femaleSUBTYPE OF (person);maiden_name: OPTIONAL STRING;husband: OPTIONAL male;

END_ENTITY; ENTITY employee;

SUBTYPE OF (person)employee_type: ONE OF (staff, a_and_p, faculty);employee_number: INTEGER;employment_status: ENUMERATION OF (full_time, part_time);date_hired: date;pay_rate: REALpay_frequency: ONEOF (monthly-pay, biweekly_pay)job_title: STRING;

END_ENTITY;


IEM 5303


Slide 27


ENTITY former_employee;SUBTYPE OF (employee)date_terminated: date;status: ONEOF ENUMERATION OF (fired, left_voluntarily);comments: STRING;

END_ENTITY;

ENTITY student;SUBTYPE OF (person)SUPERTYPE OF (applicant)student_classification: ONEOF (ugrad, grad)degree_sought: STRING – Could be in applicant;plan_of_study: SET [0,?] OF course;student_id: INTEGER;

END_ENTITY;


IEM 5303


Slide 28


ENTITY course;prerequisites: SET [0,?] OF course;cid_number: INTEGERsemester_offered: SET [0,?] OF (“spring”, “fall”, “summer”);

END_ENTITY;

ENTITY date;year: INTEGER;month: INTEGER;

WHERE valid_month_1: SELF <= 12;WHERE valid_month_2: SELF >= 1;

day: INTEGER;WHERE valid_day_1: SELF <= 31;WHERE valid_day_2: SELF >= 1;

END_ENTITY;


IEM 5303


Slide 29


Other CommentsWhat is in Model?

Lots of ENTITIES and ATTRIBUTES possible

Modeling Questions (How to)ENTITIES only appear once in

modelSCHEMA only contains items of

interest in domain being modeled

Other Questions?


IEM 5303


Slide 30

THE END

ROLL THE CREDITS

slide 1 advanced manufacturing systems design iem 5303 2000 john w. nazemetz 1.hook up portable...

Documents