slide 1 (of 185) objectives objectives course no. 204 machinery and machine guarding standards...
TRANSCRIPT
![Page 1: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/1.jpg)
Slide 1 (of 185)
ObjectivesObjectives Course No. 204 Machinery and Machine Guarding
Standards Course
• Identify basic machinery terms• Identify common machines found within a
broad spectrum of industries• Identify hazards that occur in or on
machinery• Select the appropriate OSHA STANDARD
that applies to a hazard• Present options to achieve abatement
![Page 2: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/2.jpg)
Slide 2 (of 185)
• The point of operation: that point where work is performed on the material, such as cutting, shaping, boring, or forming of stock.
• Power transmission apparatus: all components of the mechanical system which transmit energy to the part of the machine performing the work. These components include flywheels, pulleys, belts, connecting rods, couplings, cams, spindles, chains, cranks, and gears.
• Other moving parts: all parts of the machine which move while the machine is working. These can include reciprocating, rotating, and transverse moving parts, as well as feed mechanisms and auxiliary parts of the machine.
Dangerous moving parts in these three basic areas need safeguarding:
![Page 3: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/3.jpg)
Slide 3 (of 185)
Rotating pulley
Rotating shaft
Rotating coupling
Burr
Hazardous Rotating Motion
![Page 4: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/4.jpg)
Slide 4 (of 185)
Rotating (including in-running nip points)
![Page 5: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/5.jpg)
Slide 5 (of 185)
Hazardous Reciprocating Motion
![Page 6: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/6.jpg)
Slide 6 (of 185)
Hazardous Transverse Motion
![Page 7: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/7.jpg)
Slide 7 (of 185)
What must a safeguard do to protect workers against
mechanical hazards?
![Page 8: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/8.jpg)
Slide 8 (of 185)
• Prevent contactPrevent contact::
– The safeguard must prevent hands, arms, or any part of a worker's body or clothing from making contact with dangerous moving parts. A good safeguarding system eliminates the possibility of the operator or other workers placing parts of their bodies near hazardous moving parts.
• SecureSecure::
– Workers should not be able to easily remove or tamper with the safeguard, because a safeguard that can easily be made ineffective is no safeguard at all. Guards and safety devices should be made of durable material that will withstand the conditions of normal use. They must be firmly secured to the machine.
• Protect from falling objectsProtect from falling objects:: – The safeguard should ensure that no objects can fall into moving parts.
A small tool which is dropped into a cycling machine could easily become a projectile that could strike and injure someone.
![Page 9: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/9.jpg)
Slide 9 (of 185)
• Create no new hazardsCreate no new hazards::
– A safeguard defeats its own purpose if it creates a hazard of its own such as a shear point, a jagged edge, or an unfinished surface which can cause a laceration. The edges of guards, for instance, should be rolled or bolted in such a way that they eliminate sharp edges.
• Create no interferenceCreate no interference::
– Any safeguard which impedes a worker from performing the job quickly and comfortably might soon be overridden or disregarded. Proper safeguarding can actually enhance efficiency since it can relieve the worker's apprehensions about injury.
• Allow safe lubricationAllow safe lubrication::
– If possible, one should be able to lubricate the machine without removing the safeguards. Locating oil reservoirs outside the guard, with a line leading to the lubrication point, will reduce the need for the operator or maintenance worker to enter the hazardous area.
![Page 10: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/10.jpg)
Slide 10 (of 185)
Machine SafeguardingClassifications
![Page 11: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/11.jpg)
Slide 11 (of 185)
• Guards•Fixed• Interlocked•Adjustable•Self-adjusting
• Devices– Presence Sensing
•Photoelectric (optical)
•Radiofrequency (capacitance)
•Electromechanical– Pullback– Restraint
– Safety Controls•Safety trip control
– Pressure-sensitive body bar
– Safety tripod– Safety tripwire
cable• Two-hand control• Two-hand trip
– Gates• Interlocked•Other
Machine Safeguarding Classifications
![Page 12: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/12.jpg)
Slide 12 (of 185)
• Location/Distance• Potential Feeding and
Ejection Methods – Automatic feed– Semi-automatic
feed– Automatic ejection– Semi-automatic
ejection– Robot
Machine Safeguarding Classifications
• Miscellaneous Aids– Awareness
barriers– Miscellaneous
protective shields– Hand-feeding tools
and holding fixtures
![Page 13: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/13.jpg)
Slide 13 (of 185)
Advantages– Can be constructed to suit many
specific applications– In-plant construction is often
possible– Can provide maximum protection – Usually requires minimum
maintenance– Can be suitable to high
production, repetitive operations
Limitations– May interfere with visibility– Can be limited to specific
operations– Machine adjustment and repair
often require its removal, thereby necessitating other means of protection for maintenance personnel
Fixed Guards - Provides a Barrier
![Page 14: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/14.jpg)
Slide 14 (of 185)
Fixed Point of Operation Guard
![Page 15: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/15.jpg)
Slide 15 (of 185)
Safeguarding Action – Shuts off or disengages power and
prevents starting of machine when guard is open; should require the machine to be stopped before the worker can reach into the danger area
Advantages– Can provide maximum protection – Allows access to machine for
removing jams without time-consuming removal of fixed guards
Limitations– Requires careful adjustment and
maintenance– May be easy to disengage
Interlocked
![Page 16: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/16.jpg)
Slide 16 (of 185)
Safeguarding Action – Provides a barrier which may be
adjusted to facilitate a variety of production operations
Advantages– Can be constructed to suit many
specific applications – Can be adjusted to admit varying
sizes of stock
Limitations– Hand may enter danger area -
protection may not be complete at all times
– May require frequent maintenance and/or adjustment
– The guard may be made ineffective by the operator
– May interfere with visibility
Adjustable
![Page 17: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/17.jpg)
Slide 17 (of 185)
Safeguarding Action
– Provides a barrier which moves according to the size of the stock entering danger area
Advantages– Off-the-shelf guards are often
commercially available
Limitations– Does not always provide
maximum protection– May interfere with visibility– May require frequent maintenance
and adjustment
Self-Adjusting
![Page 18: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/18.jpg)
Slide 18 (of 185)
Safety DevicesSafety Devices• Stop the machine if a hand or any part of the
body is inadvertently placed in the danger area;• Restrain or withdraw the operator's hands from
the danger area during operation;• Require the operator to use both hands on
machine controls, thus keeping both hands and body out of danger; or
• Provide a barrier which is synchronized with the operating cycle of the machine in order to prevent entry to the danger area during the hazardous part of the cycle.
![Page 19: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/19.jpg)
Slide 19 (of 185)
Safeguarding Action – Machine will not start cycling when
the light field is interrupted – When the light field is broken by any
part of the operator's body during the cycling process, immediate machine braking is activated
Advantages– Can allow freer movement for
operator; simplicity of use; no adjustments required
Limitations– Does not protect against mechanical
failure– May require frequent alignment and
calibration– Excessive vibration may cause lamp
filament damage and premature burnout
– Limited to machines that can be stopped
Photoelectric
![Page 20: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/20.jpg)
Slide 20 (of 185)
Safeguarding Action– As the machine begins to cycle, the
operator's hands are pulled out of the danger area
Advantages– Eliminates the need for auxiliary
barriers or other interference at the danger area
Limitations– Limits movement of operator– May obstruct work-space around
operator– Adjustments must be made for
specific operations and for each individual
– Requires frequent inspections and regular maintenance
– Requires close supervision of the operator's use of the equipment
Pullbacks
![Page 21: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/21.jpg)
Slide 21 (of 185)
Safeguarding Action– Prevents the operator from
reaching into the danger area
Advantages– Little risk of mechanical failure
Limitations– Limits movements of operator– May obstruct work-space– Adjustments must be made for
specific operations and each individual
– Requires close supervision of the operator's use of the equipment
Restraint (holdback)
![Page 22: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/22.jpg)
Slide 22 (of 185)
Safeguarding Action
– Stops machine tripped
Advantages– Simplicity of controls
Limitations– Other guards are also required for
operator protection--usually fixed barrier guards
– Requires frequent maintenance – May not be adaptable to stock
variation
Safety Trip Controls
![Page 23: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/23.jpg)
Slide 23 (of 185)
Safety Trip Controls (cont’d)
• When pressed by hand, the safety tripod deactivates the machine.
• Because it has to be actuated by the operator during an emergency situation, its proper position is also critical.
![Page 24: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/24.jpg)
Slide 24 (of 185)
Safety Tripwire Cables Are located around the perimeter of or near the danger area.The operator must be able to reach the cable with either handto stop the machine.
Calender equipped with this type of control.
![Page 25: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/25.jpg)
Slide 25 (of 185)
Safeguarding Action – Concurrent use of both hands is
required, preventing the operator form entering the danger area
Advantages– Operator’s hands are at a
predetermined location– Operator’s hands are free to pick
up a new part after first half of cycle is completed
Limitations– Requires a partial cycle machine
with a brake– Some two-hand controls can be
rendered unsafe by holding with arm or blocking, thereby permitting one-hand operation Protects only the operator
Two Hand Controls
![Page 26: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/26.jpg)
Slide 26 (of 185)
Not Two Hand Controls
![Page 27: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/27.jpg)
Slide 27 (of 185)
Two Hand Trip• Requires concurrent application of both of the operator's control buttons
to activate the machine cycle, after which the hands are free.
• Trips must be placed far enough from the point of operation to make it impossible for the operator to move his or her hands from the trip buttons or handles into the point of operation before the first half of the cycle is completed.
![Page 28: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/28.jpg)
Slide 28 (of 185)
Gate• Movable barrier which protects the operator at the point of
operation before the machine cycle can be started.
![Page 29: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/29.jpg)
Slide 29 (of 185)
Robots
Press
FixedBarrier
Robot
StockConveyor
![Page 30: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/30.jpg)
Slide 30 (of 185)
Miscellaneous
Awareness Barrier
![Page 31: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/31.jpg)
Slide 31 (of 185)
Shields
![Page 32: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/32.jpg)
Slide 32 (of 185)
Part 1910 Subpart O - Machinery and Machine Guarding
• 1910.211 - Definitions.
• 1910.212 - General requirements for all machines.
• 1910.213 - Woodworking machinery requirements.
• 1910.214 - Cooperage machinery. (Reserved)
• 1910.215 - Abrasive wheel machinery.
• 1910.216 - Mills and calenders in the rubber and plastics industries.
• 1910.217 - Mechanical power presses.
• 1910.218 - Forging machines.
• 1910.219 - Mechanical power-transmission apparatus.
![Page 33: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/33.jpg)
Slide 33 (of 185)
Section 1910.212 is a general (or (horizontal) standard that applies to all machines not specifically mentioned elsewhere in other sections of Subpart O. Other sections are specific (vertical) standards that apply to particular types of machines; e.g., Section 1910.213 applies to woodworking machinery.
Horizontal v. Vertical Horizontal v. Vertical
![Page 34: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/34.jpg)
Slide 34 (of 185)
Machine guarding. 1910.212(a)(1)Machine guarding. 1910.212(a)(1)• One or more methods of machine guarding shall be provided to
protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.
![Page 35: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/35.jpg)
Slide 35 (of 185)
1910.212(a)(2)• Guards shall be affixed to the machine where possible and secured
elsewhere if for any reason attachment to the machine is not possible.
•The guard shall be such that it does not offer an accident hazard in itself.
![Page 36: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/36.jpg)
Slide 36 (of 185)
1910.212(a)(3)(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded.
![Page 37: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/37.jpg)
Slide 37 (of 185)
1910.212(a)(4)Revolving Drums, Barrels, and Containers
• Must be guarded by an enclosure which is interlocked with the drive mechanism.
![Page 38: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/38.jpg)
Slide 38 (of 185)
1910.212(a)(5) Fan Blades• When the periphery of the blades of a fan is less
than 7 feet above the floor or working level, the blades must be guarded with a guard having openings no larger than ½ inch.
![Page 39: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/39.jpg)
Slide 39 (of 185)
1910.212(a)(6)Anchoring Fixed Machinery– Machines designed for a fixed location must
be securely anchored to prevent walking or moving.
![Page 40: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/40.jpg)
Slide 40 (of 185)
What machines are covered by 910.212
?
![Page 41: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/41.jpg)
Slide 41 (of 185)
Presenting1910.212
![Page 42: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/42.jpg)
Slide 42 (of 185)
OSHA Standards:• 1910.212(a)(1)
Machine guarding• 1910.212(a)(3)(ii)
Point of operation Hazards:
• Contact with pinch points
• Struck by hot metals• Caught in two die
halves Reference Standard: Guarding Method:
• Barrier guard
GatesVideo Clip
Not in Handout
![Page 43: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/43.jpg)
Slide 43 (of 185)
Unguarded Dough Mixer
![Page 44: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/44.jpg)
Slide 44 (of 185)
Ingredient Mixer
OSHA Standards:• 1910.212(a)(1)
Rotating Parts• 1910.212(a)(3)(ii)
Point of operation Hazards:
• Contact with rotating parts
Reference Standard:• ANSI/AHAM FM-1
(food mixers) Guarding Method:
• Interlocks What happened?
• Employee by-passed interlock
Result - Death
![Page 45: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/45.jpg)
Slide 45 (of 185)
Injection Molding Machine
OSHA Standards:• 1910.212(a)(1) Rotating Parts
• 1910.212(a)(3)(ii) Point of operation
Reference Standard:• ANSIB151.1
Guarding Method:• Interlocked barrier gate
GuardedNot Guarded
![Page 46: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/46.jpg)
Slide 46 (of 185)
Injection Molding Machine(Plastic Molding)
1 - Electrical Interlock2 - Hydraulic Interlock
![Page 47: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/47.jpg)
Slide 47 (of 185)
Die Halves Stationary Platen
175 Ton Injection Molding Machine
Interlocked Safety Gate
Mechanical Blocking Mechanism
![Page 48: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/48.jpg)
Slide 48 (of 185)
Injection Molding Machine
3 - Mechanical Blocking MechanismPrevents the dies from closing
![Page 49: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/49.jpg)
Slide 49 (of 185)
OSHA Standards:• 1910.212(a)(1)
Machine guarding• 1910.212(a)(3)(ii)
Point of operation Hazards:
• Contact with pinch points
• Struck by hot metals• Caught in two die
halves Reference Standard:
• Society of Die Cast Engineers – Die Cast Machine Safety)
Guarding Method:• Barrier guard
Die Casting MachinesVideo Clip
![Page 50: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/50.jpg)
Slide 50 (of 185)
Die Casting Operation OSHA Standards:
• 1910.212(a)(1) Nipping points
• 1910.212(a)(3)(ii) Point of operation
Hazard (s):• Stuck-by molten
aluminum• Contact with moving
machine parts Reference Standard:
• Society of Die Cast Engineers – Die Cast Machine Safety
Guarding Method:• Barrier Guard Die Spit Shield
![Page 51: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/51.jpg)
Slide 51 (of 185)
Tubing Bender OSHA Standards:• 1910.212(a)(1) Pinch
Point – Struck by
• 1910.212(a)(3)(ii) Point of operation
Hazard (s):• Caught in the clamp die
• Contact with moving machine parts
Reference Standard:• ANSI B11.15 Pipe Tube
and Shape Bending
Guarding Method:• Barrier guard
• Foot pedal operation
• Presence sensing device
![Page 52: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/52.jpg)
Slide 52 (of 185)
Swing Arm in Motion
![Page 53: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/53.jpg)
Slide 53 (of 185)
Addison Tube Bender
Safety Matand
Foot Pedal Control
![Page 54: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/54.jpg)
Slide 54 (of 185)
Mechanical Power Press Brake
OSHA Standards:• 1910.212(a)(3)(ii) Point of
operation Hazards:
• Caught in the point of operation
Reference Standard:• ANSIB11.3 Power Press Brakes
Guarding Method:• Presence Sensing Devices• Two hand controls• Automatic barrier gates• Restraint device
![Page 55: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/55.jpg)
Slide 55 (of 185)
Point of operation hazard – CPL 2-1.25Guidelines for point of operation guarding forpower press brakes
4 4 inchesinches 4 “
![Page 56: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/56.jpg)
Slide 56 (of 185)
Press Brake Foot Treadle OperatedWith a Restraint Device
![Page 57: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/57.jpg)
Slide 57 (of 185)
Photo electric sensingacross face and barrieracross the ends of the press brake
Press brake
![Page 58: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/58.jpg)
Slide 58 (of 185)
The Back of The Press Brake
Awareness Guard
![Page 59: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/59.jpg)
Slide 59 (of 185)
Horizontal Metal Cutting Band Saw
OSHA Standards:• 1910.212(a)(1) Machine
Guarding Hazards:
• Contact with the unused portion of the saw blade
Reference Standard:• ANSIB11.10 Sawing
Guarding Method:• Telescoping barrier guard
![Page 60: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/60.jpg)
Slide 60 (of 185)
Metal Cutting Radial Saw
OSHA Standards:• 1910.212(a)(3)(ii) Point of
operation guarding Hazards:
• Contact with the saw blade
Reference Standard:• ANSIB11.10 Sawing
Guarding Method:• Side barrier guard
![Page 61: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/61.jpg)
Slide 61 (of 185)
OSHA Standards:• 1910.212(a)(1)
Nipping point Hazards:
• Contact with rotating parts
Reference Standard:• ANSI B20.1
Conveyors Guarding Method:
• Barrier guard• Isolation• Control relocation
Meat auger
![Page 62: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/62.jpg)
Slide 62 (of 185)
Guard does not meet requirement of Table O-10
Screw Conveyor
![Page 63: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/63.jpg)
Slide 63 (of 185)
OSHA Standards:• 1910.212(a)(3)(ii) Point of
operation guarding Hazards:
• Contact between the forming rolls and the material
Reference Standard:• ANSIB11.12 Roll forming and Roll
Bending Guarding Method:
• Barrier guard (interlocked)• Presence sensing device
Forming Mill Table
May use safety trip wire???
![Page 64: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/64.jpg)
Slide 64 (of 185)
Forming Mill
In-running Nip Point
Point of Operation
![Page 65: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/65.jpg)
Slide 65 (of 185)
Forming Mill
Shows the process of metal forming – Metal is being pulled through dies and formed as it progresses.
![Page 66: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/66.jpg)
Slide 66 (of 185)
OSHA Standards:• 1910.212(a)(1) Machine
guarding Hazards:
• Contact between the belt and the pulley nip (drum)
Reference Standard:• ANSIB 20.1 Conveyors
Guarding Method:• Barrier guard • Isolation
Back of a Shear – Material Take-off Conveyor
![Page 67: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/67.jpg)
Slide 67 (of 185)
Nip Point
Conveyor Nip
![Page 68: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/68.jpg)
Slide 68 (of 185)
Scissor Lift Table
OSHA Standards:• 1910.212(a)(1) Machine
guarding Hazards:
• Contact between the scissors arms
Reference Standard:• ??
Guarding Method:• Telescoping barrier guard • Isolation
![Page 69: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/69.jpg)
Slide 69 (of 185)
Pyramid or Pinch Roll Forming
OSHA Standards:• 1910.212(a)(3)(ii) Point of
operation guarding Hazards:
• Contact in the point of operation
Reference Standard:• ANSI B11.12 Roll forming and
bending Guarding Method:
• Isolation• Limited barrier guards
![Page 70: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/70.jpg)
Slide 70 (of 185)
Pyramid or Pinch Roll Forming
Point of OperationPoint of Operation
![Page 71: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/71.jpg)
Slide 71 (of 185)
Roll Former Isolation Guarding
![Page 72: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/72.jpg)
Slide 72 (of 185)
REELPaper Mill Pope
OSHA Standards:• 1910.212(a)(3)(ii) Point of
operation guarding Hazards:
• Contact in the point of operation
Reference Standard:• ANSI B11.12 Roll forming and
bending Guarding Method:
• Isolation• Limited barrier guards
![Page 73: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/73.jpg)
Slide 73 (of 185)
REEL – Threading the MachinePaper Mill Pope
In Running Nip Point
![Page 74: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/74.jpg)
Slide 74 (of 185)
REEL – Threading the MachinePaper Mill Pope
![Page 75: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/75.jpg)
Slide 75 (of 185)
REELPaper Mill Pope
![Page 76: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/76.jpg)
Slide 76 (of 185)
REELPaper Mill Pope
![Page 77: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/77.jpg)
Slide 77 (of 185)
Primary Arm Guard
![Page 78: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/78.jpg)
Slide 78 (of 185)
Lathe
OSHA Standards:• 1910.212(a)(1)
Rotating parts Hazards:
• Contact with rotating parts
Reference Standard:• ANSI B11.6 Lathes
Guarding Method:• Barrier guard
![Page 79: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/79.jpg)
Slide 79 (of 185)
Lathe
![Page 80: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/80.jpg)
Slide 80 (of 185)
Lathe Chip Shield
![Page 81: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/81.jpg)
Slide 81 (of 185)
Tapper
OSHA Standards:• 1910.212(a)(1) Machine guarding• 1910.212(a)(3)(ii) Point of operation
guarding Hazards:
• Contact with rotating parts, chips and coolant
• Contact in the point of operation
Reference Standard:• ANSI B11.8 Tapper
Guarding Method:• Barrier guards and/or isolation
![Page 82: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/82.jpg)
Slide 82 (of 185)
Vertical Boring Mills
OSHA Standards:• 1910.212(a)(1) Machine
guarding Hazards:
• Contact with rotating parts
Reference Standard:• ANSI B11. 8 Milling, drilling and
boring machines Guarding Method:
• Barrier guards
![Page 83: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/83.jpg)
Slide 83 (of 185)
Vertical Boring Mills
![Page 84: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/84.jpg)
Slide 84 (of 185)
Vertical Boring MillChip, and Rotating Part Guard
![Page 85: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/85.jpg)
Slide 85 (of 185)
Horizontal Boring Mill
![Page 86: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/86.jpg)
Slide 86 (of 185)
Mechanical Shear
OSHA Standards:• 1910.212(a)(1) Machine guarding• 1910.212(a)(3)(ii) Point of operation
guarding Hazards:
• Contact with shear blade• Contact with hold down
Reference Standard:• ANSI B11. 4 Shears
Guarding Method:• Barrier guard
Hold down
![Page 87: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/87.jpg)
Slide 87 (of 185)
Shear in Operation
Helper is exposed
![Page 88: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/88.jpg)
Slide 88 (of 185)
Modified Guard
Hydraulic Shear
Blade
![Page 89: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/89.jpg)
Slide 89 (of 185)
OSHA Standards:• 1910.212(a)(1)
Machine guarding• 1910.212(a)(3)(ii)
Point of operation Hazards:
• Contact with mold halves
• Contact with shuttle Guarding Method:
• Barrier guards• Presence devices
Core Making MachinesVideo Clip
![Page 90: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/90.jpg)
Slide 90 (of 185)
Iron Worker OSHA Standards:• 1910.212(a)(1)
Machine guarding• 1910.212(a)(3)(ii)
Point of operation Hazards:
• Contact with angle shear or notcher
• Contact with the punch and die
Guarding Method:• Barrier guards
![Page 91: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/91.jpg)
Slide 91 (of 185)
Woodworking Machinery Requirements
1910.213
![Page 92: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/92.jpg)
Slide 92 (of 185)
• 10.213(a)(9) All belts, pulleys, gears, shafts, and moving parts must be guarded in accordance with the specific requirements of 1910.219.
Belts
![Page 93: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/93.jpg)
Slide 93 (of 185)
• Circular table saws must have Circular table saws must have a hooda hood over the portion of the saw above the table, so mounted that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut.
• Must have a spreaderMust have a spreader aligned with the blade, spaced no more than one-half inch behind the largest blade mounted in the saw.
• If used for rippingIf used for ripping must have nonkickback fingers or dogs.
1910.213(c) Rip Saws
![Page 94: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/94.jpg)
Slide 94 (of 185)
1910.213(d) Hand fed Crosscut SawShall Meet Requirements of (c)(1)
![Page 95: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/95.jpg)
Slide 95 (of 185)
• Hood that will completely enclose the upper half of the saw, the arbor end, and the point of operation at all positions of the saw.
• Constructed in such a manner and of such material that it will protect the operator from flying splinters and broken saw teeth.
• Automatically cover the lower portion of the blade, so that when the saw is returned to the back of the table the hood will rise on top of the fence, and when the saw is moved forward the hood will drop on top of and remain in contact with the table or material being cut.
10.213(g) Swing Cutoff Saws
![Page 96: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/96.jpg)
Slide 96 (of 185)
![Page 97: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/97.jpg)
Slide 97 (of 185)
![Page 98: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/98.jpg)
Slide 98 (of 185)
1910.213 (h) Radial Saws• Upper hoodUpper hood that completely enclose the
upper portion of the blade down to a point that will include the end of the saw arbor.
• Sides of the lower exposed Sides of the lower exposed portionportion of the blade guarded to the full diameter of the blade.
• Radial saw used for rippingRadial saw used for ripping shall be provided with nonkickback fingers or dogs .
• Adjustable stopAdjustable stop to prevent the forward travel of the blade beyond the position necessary to complete the cut in repetitive operations.
• Installation such that the front Installation such that the front endend of the unit will be slightly higher than the rear, so as to cause the cutting head to return gently to the starting position when released by the operator.
![Page 99: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/99.jpg)
Slide 99 (of 185)
Radial Arm Saws
![Page 100: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/100.jpg)
Slide 100 (of 185)
![Page 101: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/101.jpg)
Slide 101 (of 185)
1910.213 (i) Bandsaws andBand Resaws• All portions of the saw blade shall be
enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table.
• Wheels fully encased.
• Outside periphery of the enclosure shall be solid.
• Front and back enclosed by solid material or by wire mesh or perforated metal.
• Guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side.
• Self-adjusting to raise and lower with the guide.
![Page 102: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/102.jpg)
Slide 102 (of 185)
Band Saw
![Page 103: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/103.jpg)
Slide 103 (of 185)
Band Saw
![Page 104: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/104.jpg)
Slide 104 (of 185)
![Page 105: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/105.jpg)
Slide 105 (of 185)
10.213(j)(3) Hand-Fed Jointer • Automatic guard which will cover all the section of the head on the
working side of the fence or gage.
• Effectively keep the operator's hand from coming in contact with the revolving knives.
• Automatically adjust itself to cover the unused portion of the head and shall remain in contact with the material at all times.
![Page 106: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/106.jpg)
Slide 106 (of 185)
• Cutting heads of each wood shaper, hand-fed panel raiser, or other similar machine not automatically fed, shall be enclosed with a cage or adjustable guard so designed as to keep the operator's hands away from the cutting edge.
1910.213(m)(1) Wood Shapers and Similar Equipment
![Page 107: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/107.jpg)
Slide 107 (of 185)
10.213(o)(2) Cutting Heads on Wood- Turning Lathes• Covered as completely as possible by hoods or shields.
![Page 108: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/108.jpg)
Slide 108 (of 185)
• Feed rolls of self-feed sanding machines must be protected with a semi cylindrical guard to prevent the hands of the operator from coming in contact with the in-running rolls at any point.
• Guard must be constructed of heavy material, preferably metal, and firmly secured to the frame carrying the rolls so as to remain in adjustment for any thickness of stock.
• The bottom of the guard should come down to within three-eighths inch of a plane formed by the bottom or contact face of the feed roll where it touches the stock.
1910.213(p)(1) Sanding Machines
![Page 109: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/109.jpg)
Slide 109 (of 185)
Circular Sander
![Page 110: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/110.jpg)
Slide 110 (of 185)
Unguarded belt sander
![Page 111: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/111.jpg)
Slide 111 (of 185)
![Page 112: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/112.jpg)
Slide 112 (of 185)
Saw Blade
1910.213(s)(7)&(8)
![Page 113: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/113.jpg)
Slide 113 (of 185)
Table Saw
![Page 114: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/114.jpg)
Slide 114 (of 185)
Swing Cut off Saw
![Page 115: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/115.jpg)
Slide 115 (of 185)
Table Saw
![Page 116: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/116.jpg)
Slide 116 (of 185)
Table Saw
![Page 117: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/117.jpg)
Slide 117 (of 185)
Belt Sander
![Page 118: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/118.jpg)
Slide 118 (of 185)
Table Saw
![Page 119: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/119.jpg)
Slide 119 (of 185)
Table Saw
![Page 120: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/120.jpg)
Slide 120 (of 185)
Power Molding Machine
![Page 121: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/121.jpg)
Slide 121 (of 185)
Table Saw
![Page 122: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/122.jpg)
Slide 122 (of 185)
Table Saw
![Page 123: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/123.jpg)
Slide 123 (of 185)
Dado Blade on Radial Saw
![Page 124: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/124.jpg)
Slide 124 (of 185)
Power Fed Rip Saw
![Page 125: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/125.jpg)
Slide 125 (of 185)
Radial Arm Saw
![Page 126: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/126.jpg)
Slide 126 (of 185)
Radial Arm Saw
![Page 127: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/127.jpg)
Slide 127 (of 185)
1910.215 AbrasiveWheel Machinery
![Page 128: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/128.jpg)
Slide 128 (of 185)
![Page 129: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/129.jpg)
Slide 129 (of 185)
![Page 130: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/130.jpg)
Slide 130 (of 185)
![Page 131: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/131.jpg)
Slide 131 (of 185)
• The safety guard shall cover the spindle end, nut, and flange projections.
1910.215(a)(2) Guard Design
![Page 132: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/132.jpg)
Slide 132 (of 185)
Safety Guard
![Page 133: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/133.jpg)
Slide 133 (of 185)
• On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
1910.215(a)(4) Work Rests
Work rest 1/8”
![Page 134: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/134.jpg)
Slide 134 (of 185)
Exposure adjustment
one-fourth inch
1910.215(b)(9) Tongue Guard
![Page 135: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/135.jpg)
Slide 135 (of 185)
• (1) Inspection. – The spindle speed of the
machine shall be checked before mounting of the wheel to be certain that it does not exceed the maximum operating speed marked on the wheel
1910.215(d) Mounting - Wheel Speed
![Page 136: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/136.jpg)
Slide 136 (of 185)
• (1) Inspection– Wheels should be tapped
gently with a light nonmetallic implement, such as the handle of a screwdriver for light wheels, or a wooden mallet for heavier wheels. If they sound cracked (dead), they shall not be used. This is known as the "Ring Test".
1910.215(d) Mounting - Ring Test
“Ring test”
![Page 137: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/137.jpg)
Slide 137 (of 185)
• Self Closing Guard– Effective two years after approval of this
revision for existing machines, all floor stand grinders for use with a 24” diameter wheels or larger where personnel are required to be in the plane of rotation of the wheel shall be equipped with guards which close automatically in case of wheel breakage. Other guard designs which provide equivalent protection to the personnel in the plane of rotation of the wheel may be used.
FLOOR STAND GRINDERSANSI B.7.1-1988 E 4.3.2
![Page 138: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/138.jpg)
Slide 138 (of 185)
![Page 139: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/139.jpg)
Slide 139 (of 185)
Guard Down
![Page 140: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/140.jpg)
Slide 140 (of 185)
![Page 141: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/141.jpg)
Slide 141 (of 185)
Surface grinder with top guard
![Page 142: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/142.jpg)
Slide 142 (of 185)
29CFR 1910.219 Mechanical Power-Transmission
Apparatus
![Page 143: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/143.jpg)
Slide 143 (of 185)
• (1) This section covers all types and shapes of power-transmission belts, except the following when operating at two hundred and fifty (250) feet per minute or less:– (i) Flat belts one (1) inch or less in
width,– (ii) Flat belts two (2) inches or less
in width which are free from metal lacings or fasteners,
– (iii) Round belts one-half (1/2) inch or less in diameter; and
– (iv) Single strand V-belts, the width of which is thirteen thirty-seconds (13/32) inch or less.
1910.219(a) General Requirements
![Page 144: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/144.jpg)
Slide 144 (of 185)
• (2) Vertical and inclined belts (paragraphs (e) (3) and (4) of this section) if not more than two and one-half (2 1/2) inches wide and running at a speed of less than one thousand (1,000) feet per minute, and if free from metal lacings or fastenings may be guarded with a nip-point belt and pulley guard.
1910.219(a) General Requirements
![Page 145: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/145.jpg)
Slide 145 (of 185)
Belt speed exceeds one thousand (1,000) feet per minute
![Page 146: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/146.jpg)
Slide 146 (of 185)
• (1) Flywheels located so that any part is seven (7) feet or less above floor or platform shall be guarded in accordance with the requirements of this subparagraph:
1910.219(b) Flywheels
(7) feet or less above floor or platform shall be guarded
![Page 147: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/147.jpg)
Slide 147 (of 185)
This is in further response to your letter dated April 5, 1983, concerning the guarding of flywheels on power presses.
The Occupational Safety and Health Administration's General Industry Standards 29 CFR 1910.219(b)(1) and (b)(1)(vi) require guarding of the press flywheel. Furthermore, the latter provision requires that flywheels above working areas be provided with guards of sufficient strength to contain the flywheel in the event of shaft or wheel mounting failure.
Reference to ANSI 815.1-1972, the current version of the source standard, rapidly demonstrates that structural failures are possible. Appendix AB.1 of ANSI 815.1 indicates that failures of a fatigue nature can be anticipated, particularly for older machines that have been continually exposed to cyclic leads.
Therefore, substantial guarding is necessary to provide safety. That company die setter's need to have easy access to the flywheel for die-setting for is completely valid and should be a major consideration of the guarding provided. In that regard, the guard configuration enclosed is recommended for consideration.
LETTER OF INTERPRETATION
![Page 148: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/148.jpg)
Slide 148 (of 185)
1910.219(c) Shafting
Rotating pulley
Rotating shaft
Rotating coupling
Burr
![Page 149: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/149.jpg)
Slide 149 (of 185)
• (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.
1910.219(c)(2) Guarding Horizontal Shafting
Shafting must be guarded
![Page 150: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/150.jpg)
Slide 150 (of 185)
• (i) Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves.
• (ii) Unused keyways shall be filled up or covered.
1910.219(c)(4) Projecting Shaft Ends
Shafting shall not extend morethan 1/2 the diameter of theshaft unless guarded
![Page 151: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/151.jpg)
Slide 151 (of 185)
• (1) Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section.
1910.219(d) Pulley Guarding
![Page 152: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/152.jpg)
Slide 152 (of 185)
![Page 153: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/153.jpg)
Slide 153 (of 185)
1910.219(f) Gears, Sprockets,and Chains
![Page 154: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/154.jpg)
Slide 154 (of 185)
• (1) Gears shall be guarded in accordance with one of the following methods:– (i) By a complete enclosure; or– (ii) By a standard guard as described
in paragraph (o) of this section, at least seven (7) feet high extending six (6) inches above the mesh point of the gears; or
– (iii) By a band guard covering the face of gear and having flanges extended inward beyond the root of the teeth on the exposed side or sides. Where any portion of the train of gears guarded by a band guard is less than six (6) feet from the floor a disk guard or a complete enclosure to the height of six (6) feet shall be required.
1910.219(f) Gears
![Page 155: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/155.jpg)
Slide 155 (of 185)
• All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided.
1910.219 (f)(3) Sprockets and Chains
![Page 156: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/156.jpg)
Slide 156 (of 185)
• (1) Collars. All revolving collars, including split collars, shall be cylindrical, and screws or bolts used in collars shall not project beyond the largest periphery of the collar.
• (2) Couplings Shaft couplings shall be so constructed as to present no hazard from bolts, nuts, setscrews, or revolving surfaces. Bolts, nuts, and setscrews will, however, be permitted where they are covered with safety sleeves or where they are used parallel with the shafting and are countersunk or else do not extend beyond the flange of the coupling.
1910.219 (i) Collars and Couplings
![Page 157: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/157.jpg)
Slide 157 (of 185)
• (1) Materials– (i) Standard conditions shall be guarded by the use of the
following materials. Expanded metal, perforated or solid sheet metal, wire mesh on a frame of angle iron, or iron pipe securely fastened to floor or to frame of machine.
– (ii) All metal should be free from burrs and sharp edges.
1910.219(m) Standard GuardsGeneral Requirements
![Page 158: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/158.jpg)
Slide 158 (of 185)
• (1) Minimum requirements. – The materials and
dimensions specified in this paragraph shall apply to all guards, except horizontal overhead belts, rope, cable, or chain guards more than seven (7) feet above floor, or platform.
1910.219(o) Approved Materials
![Page 159: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/159.jpg)
Slide 159 (of 185)
• (i) Wood guards may be used in the woodworking and chemical industries, in industries where the presence of fumes or where manufacturing conditions would cause the rapid deterioration of metal guards; also in construction work and in locations outdoors where extreme cold or extreme heat make metal guards and railings undesirable. In all other industries, wood guards shall not be used.
1910.219(o)(2) Wood Guards
Wood guard
Wood guard
![Page 160: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/160.jpg)
Slide 160 (of 185)
29 CFR 1910.261Paper, Pulp & Paperboard Mills
Application of 29 CFR 1910.212
![Page 161: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/161.jpg)
Slide 161 (of 185)
Hydro Pulper
![Page 162: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/162.jpg)
Slide 162 (of 185)
Fourdrinier
![Page 163: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/163.jpg)
Slide 163 (of 185)
Screen Roll
![Page 164: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/164.jpg)
Slide 164 (of 185)
Screen Cleaning
![Page 165: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/165.jpg)
Slide 165 (of 185)
Threading the Presses (Tailing)
![Page 166: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/166.jpg)
Slide 166 (of 185)
Cooch Carrier Roll Nip Point
![Page 167: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/167.jpg)
Slide 167 (of 185)
Cooch Carrier Roll Nip Point
![Page 168: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/168.jpg)
Slide 168 (of 185)
First Press Nip Point
![Page 169: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/169.jpg)
Slide 169 (of 185)
Press Section / First Dryer
![Page 170: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/170.jpg)
Slide 170 (of 185)
Cylinder Machine Nip Point
![Page 171: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/171.jpg)
Slide 171 (of 185)
Cleaning the Press Roll
![Page 172: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/172.jpg)
Slide 172 (of 185)
Dryers (Front Side)
![Page 173: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/173.jpg)
Slide 173 (of 185)
Dryer (Back Side)
![Page 174: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/174.jpg)
Slide 174 (of 185)
![Page 175: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/175.jpg)
Slide 175 (of 185)
Isolation Guarding
![Page 176: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/176.jpg)
Slide 176 (of 185)
Line Shaft
![Page 177: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/177.jpg)
Slide 177 (of 185)
Incline Belts and Pulleys
![Page 178: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/178.jpg)
Slide 178 (of 185)
Tailing (Threading) the Dryer
![Page 179: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/179.jpg)
Slide 179 (of 185)
Dryer Nip Point
![Page 180: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/180.jpg)
Slide 180 (of 185)
Reel Nip Point
![Page 181: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/181.jpg)
Slide 181 (of 185)
Rewinder Nip Point
![Page 182: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/182.jpg)
Slide 182 (of 185)
Guarded Rewinder
![Page 183: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/183.jpg)
Slide 183 (of 185)
Rotary Cutters
![Page 184: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/184.jpg)
Slide 184 (of 185)
Embosser Nip Point
![Page 185: Slide 1 (of 185) Objectives Objectives Course No. 204 Machinery and Machine Guarding Standards Course Identify basic machinery terms Identify common machines](https://reader035.vdocuments.net/reader035/viewer/2022062619/5517fb9b550346c1568b500b/html5/thumbnails/185.jpg)
Slide 185 (of 185)
Nip Point Guarding