sliding door sliding door – single-leaf - ht · pdf filesliding door sliding door ......
TRANSCRIPT
2xA + 200 mm
• E E
0 L!) L!)
A
E E
0 0
E E
0 L!) N N
E E
L!)
2xA + 200 mm A + 100 mm
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction (opens on the right)
SLIDING DOOR
SLIDING DOOR – SINGLE-LEAF
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
SLIDING DOOR – SINGLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The door panel is made of powder-coated or ground stainless
steel. The door drive box is fitted with a flip-up maintenance panel. The door matches the architecture of the room as a result of the powder coating
selection according to our colour chart, thus ensuring a coherent overall image.
DIMENSIONS
Clear frame height (=A) 800–1900 mm
Frame outer dimension A + 100 mm
Clear inner width A – 125 mm (with bow handle)
Frame height 2100 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 200 mm
Door panel width A + 50 mm
DOOR PANEL
Surfacestandard: ground stainless steel optional: powder-coated (with surcharge)
Weight (door panel) max. 200 kg
Door handles bow handle I recessed handle
Colour optional according to colour chart
SPECIAL FITTINGS
X-ray protection Pb 0.5–3 mm
Inspection window rectangular: 400/600 mm I 600/600 mm I 400/1500 mm I round: Ø 400 mm (without venetian blinds)
Venetian/roller blinds I LC glass button in frame I management with HT Control
Locking system mortise lock I locking system with sluice function possible
Operationframe button I door pushbar I code device I large-area button I infrared sensor strip Inon-contact buttons I HT Control
Door panel core waterproof
DRIVE
Dorma ES 410 automatic drive Handrail
Operation Button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steel optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
///Y//YY////Y//YY////Y////Y//Y//YY///. 2xA + 200 mm
E E
0 0
E E
0 l.() N N
A 125 mm
1� �,[ 1�
/ ·
E E
0 l.() 0 N
43 mm
------ -
E E
0 l.() 0 N
------ -
10mm
/ 2xA + 200 mm
A + 100 mm
E E
N
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction(opens on the right)
SLIDING DOOR
GLASS SLIDING DOOR – SINGLE-LEAF
Insulating glass door panel Single-glass door panel
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
GLASS SLIDING DOOR – SINGLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The double-glazed door panel is fitted with venetian blinds
on the inside (surcharge). The transparency ensures that the design of the room is open and bright while the venetian blinds guarantee that the
privacy is maintained at all times. The door drive box is fitted with a flip-up maintenance panel.
DIMENSIONS
Clear frame width (=A) 800–1600 mm
Frame outer dimension A + 100 mm
Clear inner width A – 125 mm
Frame height 2100 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 200 mm
Door panel width A + 50 mm
DOOR PANEL I 43 mm multiple-glazing
Composition8 mm single-pane safety glass (ESG)27 mm cavity8 mm single-pane safety glass (ESG)
Surface 60 mm all-round coated edges I colour black RAL 9004
Weight (door panel) max. 200 kg
Door handles Bow handles on both sides
SPECIAL FITTINGS
Venetian/roller blinds button in frame I management with HT Control
Operation frame button set I door pushbar I code device I non-contact buttons I HT Control
DRIVE
Dorma ES 410 automatic drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steel optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
WJJJ/J/JJ/J/JJ/J/J//J/JJ/J//J/J/J//A 2xA + 250 mm 300 mm
E E - --- -
E E
0 l{) N +
E u E
0 l{) l{)
= = - --- -
X . . . ·/h2xA + 250 mm
A +100 m
A 125 mm
1� E
q -�� E l{)
1 + u
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction(opens on the right)
SLIDING DOOR
ROOM-HIGH SLIDING DOOR – SINGLE-LEAF
C =
room
hei
ght
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
ROOM-HIGH SLIDING DOOR – SINGLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The door panel is made of powder-coated or ground stain-
less steel. The door drive box is built in to the ceiling and is fitted with a flip-up maintenance panel. The room height ensures easier handling and
mobility during daily work.
DIMENSIONS
Cear frame width (=A) 800–1900 mm
Frame outer dimension A + 100 mm
Clear inner width A – 125 mm (with bow handle)
Frame height max. 3000 mm
Wall thickness up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 250 mm
DRIVE
Dorma ES 410 automatic drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steel optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
DOOR PANEL
Surfacestandard: ground stainless steel optional: powder-coated (with surcharge)
Weight (door panel) max. 200 kg
Door handles bow handle I recessed handle
Colour optional according to colour chart
SPECIAL FITTINGS
X-ray protection Pb 0.5–3 mm
Inspection window rectangular: 400/600 mm I 600/600 mm I 400/1500 mm I round: Ø 400 mm (without venetian blinds)
Venetian/roller blinds I LC glass button in frame I management with HT Control
Locking system mortise lock I locking system with sluice function possible
Operationframe button set I door pushbar I code device I large-area button I infrared sensor strip I non-contact buttons I HT Control
Door panel core waterproof
V///J///////////////////J///////�· 2xA + 250 mm
· · ;/
E E
0 l() N + u
A 125 mm
E E
0 L[) N
. ·/
/
43 mm
./
300 mm
10mm
2xA + 250 mm
E E
l() '-0 + u
A + 100 m
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction(opens on the right)
SLIDING DOOR
ROOM-HIGH GLASS SLIDING DOOR – SINGLE-LEAF
Insulating glass door panel Single-glass door panel
C =
room
hei
ght
C =
room
hei
ght
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
ROOM-HIGH GLASS SLIDING DOOR – SINGLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The double-glazed door panel is fitted with venetian blinds
on the inside (surcharge). The transparency ensures that the design of the room is open and bright while the venetian blinds guarantee that the
privacy is maintained at all times. The door drive box is built in to the ceiling and is fitted with a flip-up maintenance panel. The room height
ensures easier handling and mobility during daily work.
DIMENSIONS
Clear frame width (=A) 800–1600 mm
Frame outer dimensions A + 100 mm
Clear inner width A – 125 mm
Frame height max. 3000 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 250 mm
Door panel width A + 50 mm
DOOR PANEL I 43 mm multiple-glazing
Composition8 mm single-pane safety glass (ESG)27 mm cavity8 mm single-pane safety glass (ESG)
Surface 60 mm all-round coated edges I colour black RAL 9004
Weight (door panel) max. 200 kg
Door handles bow handles on both sides
SPECIAL FITTINGS
Venetian/roller blinds button in frame I management with HT Control
Operation frame button set I door pushbar I code device I non-contact buttons I HT Control
DRIVE
Dorma ES 410 automatic drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steel optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
���������������� · 2xA + 600 mm
E E
0 L[) L[)
1 1 1 1 1 1 1 1 1 1 1 1 1
A 12 mm
1
• � IT i1
! 1 1
E E
0 0 N
E E
0 L[) N N
1� 1 1 1 1 1 1 1 1 1 1 1 1 1
E E
0 L[) -
0 N
A + 10o mm
E E
L[)
N
1 1 1 1
.1 1 1 1 1 1 1 1 1
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
SLIDING DOOR
SLIDING DOOR – DOUBLE-LEAF
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
SLIDING DOOR – DOUBLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The door panels are made of powder-coated or ground
stainless steel. The door drive box is fitted with a flip-up maintenance panel. The door matches the architecture of the room as a result of the
powder coating selection according to colour chart, thus ensuring a coherent overall image. The width of the door simplifies its handling during
daily work.
DIMENSIONS
Clear frame width (=A) 1300–2100 mm
Frame outer dimension A + 100 mm
Clear inner width A – 250 mm (with bow handle)
Frame height 2100 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 600 mm
Door panel width A + 50 mm
DOOR PANEL
Surface standard: ground stainless steel I optional: powder-coated (with surcharge)
Weight (door panel) max. 2 x 125 kg
Door handles bow handle I recessed handle
Colour optional according to colour chart
SPECIAL FITTINGS
X-ray protection Pb 0.5–3 mm
Inspection window rectangular: 400/600 mm I 600/600 mm I 400/1500 mm I round: Ø 400 mm (without venetian blinds)
Venetian/roller blinds I LC glass button in frame I management with HT Control
Locking system mortise lock I locking system with sluice function possible
Operationframe button set I door pushbar I code device I large-area button I infrared sensor strip Inon-contact buttons I HT Control
Door panel waterproof
DRIVE
Dorma ES 420 automatic drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Material standard: ground stainless steel I optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
2xA + 600 mm
200
mm
225
0 m
m
A A
B
B
B
A 125 mm 125 mm
205
0 m
m
43 mm
A + 100 mm
211
5 m
m
2xA + 600 mm
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction (opens on the right + left)
SLIDING DOOR
GLASS SLIDING DOOR – DOUBLE-LEAF
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
GLASS SLIDING DOOR – DOUBLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The double-glazed door panel is fitted with venetian
blinds on the inside (surcharge). The transparency ensures that the design of the room is open and bright while the venetian blinds guarantee
that the patients' privacy is maintained at all times. The door drive box is fitted with a flip-up maintenance panel. The width of the door simpli-
fies its handling during daily work.
DIMENSIONS
Clear frame width (=A) 1600–3000 mm
Frame outer dimension A + 100 mm
Clear inner width A – 250 mm
Frame height 2100 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 600 mm
Door panel width A + 50 mm
DOOR PANEL I 43 mm multiple-glazing
Composition8 mm single-pane safety glass (ESG)27 mm cavity 8 mm single-pane safety glass (ESG)
Surface 60 mm all-round coated edges I colour black RAL 9004
Weight (door panel) max. 2 x 125 kg
Door handles bow handles on both sides
SPECIAL FITTINGS
Venetian/roller blinds button in frame I management with HT Control
Operation frame button set I door pushbar I code device I non-contact buttons I HT Control
DRIVE
Dorma ES 420 automatic drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steel optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
75 250
CC 75
250 AA
75 250 BB
B
15
15
50
15
5
B
15
50
B
15
15
15
50
75 250
CC 75
250 AA
75 250 BB
B
15
15
50
15
5
B
15
50
B
15
15
15
50
75 250
CC 75
250 AA
75 250 BB
B
15
15
50
15
5
B
15
50
B
15
15
15
50
2xA + 600 mm
250
mm
= = = =
C +
250
mm
155
0
A A
B
B
B
A
125 mm 125 mm
300
A + 100 mm
C +
65m
m
2xA + 600 mm
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
SLIDING DOOR
ROOM-HIGH SLIDING DOOR – DOUBLE-LEAF
Opening direction (opens on the right + left)
C =
room
hei
ght
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
ROOM-HIGH SLIDING DOOR – DOUBLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The door panels are made of powder-coated or ground
stainless steel. The door drive box is built in to the ceiling and is fitted with a flip-up maintenance panel. The room height ensures easier handling
and mobility during daily work. The width of the door simplifies its handling during daily work.
DIMENSIONS
Clear frame width (=A) 1300–2100 mm
Frame outer dimension A + 100 mm
Clear inner width A – 250 mm (with bow handle)
Frame height max. 3000 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 600 mm
Door panel width A + 50 mm
DOOR PANEL
Surfacestandard: ground stainless steeloptional: powder-coated (with surcharge)
Weight (door panel) max. 2 x 125 kg
Door handles bow handle I recessed handle
Colour optional according to colour chart
SPECIAL FITTINGS
X-ray protection Pb 0.5–3 mm
Inspection window rectangular: 400/600 mm I 600/600 mm I 400/1500 mm I round: Ø 400 mm (without venetian blinds)
Venetian/roller blinds I LC glass button in frame I management with HT Control
Locking system mortise lock I locking system with sluice function possible
Operationframe button set I door pushbar I code device I large-area button I infrared sensor strip Inon-contact buttons I HT Control
DRIVE
Dorma ES 420 automatic drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steeloptional: powder-coated (with surcharge)
Frame type sliding in front of the wall
2xA + 600 mm
250
mm
C +
250
mm
A A
B
B
B
A 125 mm 125 mm
43 mm
300
A + 100 mm
C +
65m
m
2xA + 600 mm
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
SLIDING DOOR
ROOM-HIGH GLASS SLIDING DOOR – DOUBLE-LEAF
Opening direction (opens on the right + left)
C=
room
hei
ght
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
ROOM-HIGH GLASS SLIDING DOOR – DOUBLE-LEAF
The single-piece edged closed frame is adjusted to suit each module wall thickness. The double-glazed door panel is fitted with venetian blinds
on the inside (surcharge). The transparency ensures that the design of the room is open and bright while the venetian blinds guarantee that the
privacy is maintained at all times. The door drive box is built in to the ceiling and is fitted with a flip-up maintenance panel. The room height
ensures easier handling and mobility during daily work. The width of the door simplifies its handling during daily work.
DIMENSIONS
Clear frame width (=A) 1600–2800 mm
Frame outer dimensions A + 100 mm
Clear inner width A – 250 mm
Frame height max. 3000 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length 2 x A + 600 mm
Door panel A + 50 mm
SPECIAL FITTINGS
Venetian/roller blinds I LC glass button in frame I management with HT Control
Operation frame button set I door pushbar I code device I non-contact buttons I HT Control
DRIVE
Dorma ES 420 automatic drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steel optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
DOOR PANEL I 43 mm insulated glazing
Composition8 mm single-pane safety glass (ESG)27 mm cavity8 mm single-pane safety glass (ESG)
Surface 60 mm all-round coated edges I colour black RAL 9004
Weight (door panel) max. 2 x 125 kg
Door handles bow handles on both sides
75 250
CC 75
250 AA
75 250 BB
B
15
15
50
15
5
B
15
50
B
15
15
15
50
75 250
CC 75
250 AA
75 250 BB
B
15
15
50
15
5
B
15
50
B
15
15
15
50
75 250
CC 75
250 AA
75 250 BB
B
15
15
50
15
5
B
15
50
B
15
15
15
50
A A
B
B
A
250 mm
B
245
0 m
m /
231
0 m
m
400
mm
/ 2
60 m
m
2xA + 300 mm
155
0 m
m
= =
205
0 m
m
A + 140 mm
213
0 m
m
2xA + 300 mm
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction(opens on the right)
SLIDING DOOR
EI230 I EI290 FIRE PROTECTION DOOR
with
I w
ithou
t aut
omat
ic c
losu
re
with
I w
ithou
t aut
omat
ic c
losu
re
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
DIMENSIONS
Clear frame width (=A) 800–1610 mm
Frame outer dimension A + 140 mm
Clear inner width A – 250 mm
Frame height 2100 mm I optionally up to 3000 mm
Length of door drive box 2 x A + 450 mm
SLIDING DOOR
EI230 I EI290 FIRE PROTECTION DOOR
The door panel is designed with an all-round sealing system. The frame is installed with a counter frame. The door drive box is fitted with a flip-
up maintenance panel. The fire protection sliding door with fire resistance classes EI230/EI290 has been tested in accordance with European DIN
standards.
DOOR PANEL
Surface standard: ground stainless steel I optional: powder-coated (with surcharge)
Weight (door panel) up to 200 kg standard I up to 350 kg (with surcharge)
Door handles bow handles I recessed handles
Colour optional according to colour chart
SPECIAL FITTINGS
X-ray protection Pb 0.5–3 mm
Inspection window rectangular fire resistant glazing: 210–800 x 600–1500 mm
Venetian/roller blinds I LC glass button in frame I management with HT Control
DRIVE
Dorma ES 410 automatic drive
DKT 01 manual release button for the manual closing of the door
Operation infrared sensors I wall pressure strip
Closure in the case of a fire automatic closure with arrest system
FRAME
Material standard: ground stainless steel I optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
FIRE PROTECTION CLASSIFICATION EI230
European standards tested in accordance with EN 1363-1 and EN 1634-1
Sealing system labyrinth seals with fire-resistant strips
Smoke protection in accordance with DIN 18095-1
Fire alarm system switches automatic operation off from the power supply in the case of a fire
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
120
110
70
WS
15LB
120
110
70
WS
15LB
120
WS
70
110
2015-10-23 C:\Users\kevinw\Desktop\Prospekt\EI30-ST-Freigaben\EI30-Freigabe_DIN-R-Prospekt.pyo
120
110
70
WS
15LB
120
110
70
WS
15LB
120
WS
70
110
2015-10-23 C:\Users\kevinw\Desktop\Prospekt\EI30-ST-Freigaben\EI30-Freigabe_DIN-R-Prospekt.pyo
120
110
70
WS
15LB
120
110
70
WS
15LB
120
WS
70
110
2015-10-23 C:\Users\kevinw\Desktop\Prospekt\EI30-ST-Freigaben\EI30-Freigabe_DIN-R-Prospekt.pyo
E E
0 L() L()
2xA + 200 mm
•
A
E E
0 0 N
1
E E
0L() N N
E E
0 L() 0 N
2xA + 200 mm A + 120 mm
E E
L()
N
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction(opens on the right)
SLIDING DOOR
X-RAY PROTECTION DOOR
Lead insert Pb 0.5–3 mm
Lead insert Pb 0.5–3 mm
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
SLIDING DOOR
X-RAY PROTECTION DOOR
The door panel is designed with an all-round sealing system. The frame is installed with a counter frame. The door drive box is fitted with a flip-
up maintenance panel. With a lead equivalent value of 0.5–3 mm Pb the x-ray protection door is suited for all types of OR; it may also be used
for Hybrid ORs.
DIMENSIONS
Clear frame width (=A) 800–1900 mm
Frame outer dimension A + 120 mm
Clear inner width A – 125 mm (with bow handle)
Frame height 2100 mm
Wall thickness (=B) up to 200 mm standard I larger than 200 mm with surcharge
Length of door drive box 2 x A + 200 mm
Door panel width A + 50 mm
DOOR PANEL
Surfacestandard: ground stainless steeloptional: powder-coated (with surcharge)
Lead inserts Pb 0.5–3 mm
Door handles bow handle I recessed handle
Colour optional according to colour chart
SPECIAL FITTINGS
Inspection windowx-ray protection glazing rectangular: 400/600 mm I 600/600 mm I 400/1500 mm I round: Ø 400 mm (without venetian blinds)
Venetian/roller blinds I LC glass button in frame I management with HT Control
Locking system mortise lock I locking system with sluice function possible
Operationframe button set I door pushbar I code device I large-area button I infrared sensor strip Inon-contact buttons I HT Control
Door panel core waterproof
DRIVE
Heavy-duty drive Handrail
Operation button, fitted by customer manual
Door drive box flip-up maintenance panel flip-up maintenance panel
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
FRAME
Materialstandard: ground stainless steeloptional: powder-coated (with surcharge)
Frame type sliding in front of the wall
•
tE E
0 l() l()
A
1
�
E E
0 ll) C")
E E
0 CO "q" N
E E
l()
E E
0 l() 0 N
2xA + 350 mm
A + 160 mm
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction(opens on the right)
SLIDING DOOR
NOISE PROTECTION SLIDING DOOR
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
DIMENSIONS
Clear frame width (=A) 965–1665 mm
Frame outer dimension A + 160 mm
Clear inner width A – 165 mm
Frame height 2130 mm
Wall thickness (=B) bis 200 mm
Length of door drive box 2 x A + 350 mm
Door panel width A + 85 mm
SLIDING DOOR
NOISE PROTECTION DOOR
The door panel is designed with an all-round sealing system. A noise protection plate is installed as door panel core. The frame is installed with
a counter frame. The door drive box is fitted with a flip-up maintenance panel.
DOOR PANEL
Surface standard: ground stainless steel I optional: powder-coated (with surcharge)
Door panel core Sonitus brand noise protection plate
Door handles roll handles on both sides
Colour optional according to colour chart
FRAME
Material standard: ground stainless steel I optional: powder-coated (with surcharge)
Frame type sliding in front of the wall
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
NOISE INSULATION VALUE (DIN 4109)
Value Rw: 43 dB (without glass) I Rw: 39 dB (with glass)
Testing acc. to EN ISO 140-1 16238307-V16 (without glass) I 16238307-V20 (with glass)
DRIVE
Dorma ES 410 automatic drive Handrail
Operation button, fitted by customer manual
Bolt switch contact deactivates the drive in a closed condition
SPECIAL FITTINGS
X-ray protection Pb 0.5–3 mm
Operationframe button set I door pushbar I code device I large-area button I infrared sensor strip Inon-contact buttons I HT Control
Inspection window rectangular: 400/600 mm I 600/600 mm I 400/1500 mm I round: Ø 400 mm (without venetian blinds)
Venetian/roller blinds I LC glass button in frame I management with HT Control
Locking system mortise lock I locking with bar pointing upwards
�
E E
0 l{) ,.., l{)
A
1
�
E E
0 l() (")
E E
0 00 '<t N
E E
l{)
E E
0
N
2xA + 350 mm
A + 160 mm
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 1/2
Door Systems
Opening direction(opens on the right)
SLIDING DOOR
HERMETIC SLIDING DOOR
Door Systems
HT GROUP // Rambacher Straße 2 • 91180 Heideck • T + 49 (0) 9177 98 - 0 • F + 49 (0) 9177 98 - 180 • [email protected] • www.htgroup.de
Page 2/2Version November 07th 2016 – subject to technical alterations
DIMENSIONS
Clear frame width (=A) 965–1665 mm
Frame outer dimension A + 160 mm
Clear inner width A – 165 mm
Frame height 2130 mm (optionally up to 2500 mm)
Length of door drive box 2 x A + 350 mm
Door panel width A + 85 mm
SLIDING DOOR
HERMETIC SLIDING DOOR
The door panel is designed with an all-round sealing system. The frame is installed with a counter frame. The door drive box is fitted with a flip-
up maintenance panel. The hermetic sliding door allows neither a circulation of air nor of noise and additionally an equalisation of positive and
negative pressure is prevented, as a result of which it is perfectly suited for clean rooms, in particular ORs or quarantine rooms.
FRAME
Materialstandard: ground stainless steeloptional: powder-coated (with surcharge)
Frame type sliding in front of the wall
Installation retrofit installation possible
AIR TIGHTNESS (DIN EN 1859)
200 Pa with 2.028 m³/h – 200 Pa with 1.89 m³/h
Floor levelness +/– 2 mm
WALL CONNECTIONS
Plasterboard wall Panel wall Masonry
DRIVE Dorma ES 410 automatic drive/hermetic
Bolt switch contact deactivates the drive in a closed condition
SPECIAL FITTINGS
X-ray protection Pb 0.5–3 mm
Inspection window rectangular: 400/600 mm I 600/600 mm I 400/1500 mm I round: Ø 400 mm (without venetian blinds)
Venetian/roller blinds I LC glass button in frame I management with HT Control
Locking system mortise lock I locking with bar pointing upwards
DOOR PANEL
Surfacestandard: ground stainless steeloptional: powder-coated (with surcharge)
Weight (door panel) up to 200 kg
Door handles stainless steel roll handles on both sides
Colour optional according to colour chart