slug catchers · 2019-02-06 · slug catcher (offshore facility utilizing headers) high yield &...
TRANSCRIPT
Slug CatchersEngineered solutions for the separation
and storage of large volume liquids from natural gas.
• Supervised Final Completion for Assured Performance Guarantee • TFES Owned Project Lifecycle
• Continued QC thru Commissioning • Field Welds are Pipe to Pipe or Pipe to Fitting Only
• Finalize & Optimize the Sizing, Design, Budgets & Timing
CONCEPT
FEED
DESIGN
MANUFACTURING
EPC / INSTALL
• Consulting on Design Factor • Plot Space Optimization • Conceptual Designs• Preliminary/Budgetary Pricing • Delivery Timeline
• Designed Using Extruded Connections Saving both Space & Cost
• Designs for 2 or 3 Phase Separation • Detailed Design Phase • CFD Analysis for Flow/Pressure
• +130 Custom Designs Providing Expert Knowledge • Process Guarantee & Performance Guarantee
• Mechanical Design, Pipe Stress, Foundation Loads (early in process for civil/owner planning)
• Minimize Field Construction Cost with Prefab Components • Minimize Field Welding • Quality Controlled In-house Fitting Mfg
• Optimize Shipping Configuration • 100% X-Rayed Welds
The Taylor Forge Value Added Process
Leading the World in Slug Catcher Concept, Design, Engineering and Fabrication
Protecting your assets at every stage of our process
Leading the World in Slug Catcher Concept, Design, Engineering and Fabrication
The Advantages of a Taylor Forge Slug Catcher
• Balance & Symmetry • Predictable Efficiency • Prevents Carryover
• Ease of Installation • Full Flow Operations • Short Lead Time
• Expansion Capabilities • Cost Effective • Large Volume Storage
• Single Source Responsibility • Large Cross Manifold for Balanced Distribution
Level Bridle
Vent Line
Liquid Outlet Manifold
Dry Gas Outlet Manifold
Vortex Scrubber
Wet Gas Inlet Manifold
Inlet Piping
Downcomer
Separation Tubes
Storage Tubes
Supports
Sludge Manifold
World Headquarters:208 N. Iron Street
Paola, KS 66071(913) 294-5331www.tfes.com
Contact our engineers today: [email protected]
Our Certifications
Our commitment to quality and continued improvement has resulted in the ASME certification for the following stamps: Sec. I - S and PP, Sec. VIII - U, U2 and 4. Taylor Forge – Paola, KS is ISO 9001:2008 Certified.
Wet Gas Inlet Manifold Separator TubesInlet Piping
Single Downcomer Storage TubesSupports
Sludge ManifoldLiquid Outlet Manifold
Horizontal Vortex Scrubber
Level Bridle
Dry Gas Outlet Manifold
Scope of Shippable Parts:
S-Bend
World Headquarters: 208 N. Iron Street
Paola, KS 66071 P 913.294.5331F 913.294.5337www.tfes.com
Other Products
Pressure Vessels (Steam Drum)
Extruded Outlets(Air Grid Hub & Arm)
Trap with Patent Closure (Skid-mounted for Export)
Slug Catcher (Offshore Facility Utilizing Headers)
High Yield & Nuclear Tees, Caps, Reducers & Elbows
12,000 psi Y-70/Y-80Scraper Trap Skid
Taylor Forge is a global pressure equipment fabricator,
headquartered in Eastern Kansas, providing high quality
engineered products to a variety of industries including oil
and gas, chemical, power, nuclear, aerospace and defense.
In business for over 60 years, Taylor Forge takes pride in its
specialized process design, thorough mechanical design and
unique fabrication capabilities.
For more information about our products,
engineering and fabrication services,
please contact us at 913-294-5331 or
email us at [email protected].
About Taylor Forge
Our commitment to quality and continued improvement has
resulted in the ASME certification for the following stamps:
Sec. I - S and PP, Sec. VIII - U, U2 and 4, Sec. III - NA and NPT.
Taylor Forge has also received ISO 9001 certification approval.
Our Certifications
World Headquarters: 208 N. Iron Street
Paola, KS 66071 P 913.294.5331F 913.294.5337www.tfes.com
Other Products
Pressure Vessels (Steam Drum)
Extruded Outlets(Air Grid Hub & Arm)
Trap with Patent Closure (Skid-mounted for Export)
Slug Catcher (Offshore Facility Utilizing Headers)
High Yield & Nuclear Tees, Caps, Reducers & Elbows
12,000 psi Y-70/Y-80Scraper Trap Skid
Taylor Forge is a global pressure equipment fabricator,
headquartered in Eastern Kansas, providing high quality
engineered products to a variety of industries including oil
and gas, chemical, power, nuclear, aerospace and defense.
In business for over 60 years, Taylor Forge takes pride in its
specialized process design, thorough mechanical design and
unique fabrication capabilities.
For more information about our products,
engineering and fabrication services,
please contact us at 913-294-5331 or
email us at [email protected].
About Taylor Forge
Our commitment to quality and continued improvement has
resulted in the ASME certification for the following stamps:
Sec. I - S and PP, Sec. VIII - U, U2 and 4, Sec. III - NA and NPT.
Taylor Forge has also received ISO 9001 certification approval.
Our Certifications
World Headquarters: 208 N. Iron Street
Paola, KS 66071 P 913.294.5331F 913.294.5337www.tfes.com
Other Products
Pressure Vessels (Steam Drum)
Extruded Outlets(Air Grid Hub & Arm)
Trap with Patent Closure (Skid-mounted for Export)
Slug Catcher (Offshore Facility Utilizing Headers)
High Yield & Nuclear Tees, Caps, Reducers & Elbows
12,000 psi Y-70/Y-80Scraper Trap Skid
Taylor Forge is a global pressure equipment fabricator,
headquartered in Eastern Kansas, providing high quality
engineered products to a variety of industries including oil
and gas, chemical, power, nuclear, aerospace and defense.
In business for over 60 years, Taylor Forge takes pride in its
specialized process design, thorough mechanical design and
unique fabrication capabilities.
For more information about our products,
engineering and fabrication services,
please contact us at 913-294-5331 or
email us at [email protected].
About Taylor Forge
Our commitment to quality and continued improvement has
resulted in the ASME certification for the following stamps:
Sec. I - S and PP, Sec. VIII - U, U2 and 4, Sec. III - NA and NPT.
Taylor Forge has also received ISO 9001 certification approval.
Our Certifications
World Headquarters: 208 N. Iron Street
Paola, KS 66071 P 913.294.5331F 913.294.5337www.tfes.com
Other Products
Pressure Vessels (Steam Drum)
Extruded Outlets(Air Grid Hub & Arm)
Trap with Patent Closure (Skid-mounted for Export)
Slug Catcher (Offshore Facility Utilizing Headers)
High Yield & Nuclear Tees, Caps, Reducers & Elbows
12,000 psi Y-70/Y-80Scraper Trap Skid
Taylor Forge is a global pressure equipment fabricator,
headquartered in Eastern Kansas, providing high quality
engineered products to a variety of industries including oil
and gas, chemical, power, nuclear, aerospace and defense.
In business for over 60 years, Taylor Forge takes pride in its
specialized process design, thorough mechanical design and
unique fabrication capabilities.
For more information about our products,
engineering and fabrication services,
please contact us at 913-294-5331 or
email us at [email protected].
About Taylor Forge
Our commitment to quality and continued improvement has
resulted in the ASME certification for the following stamps:
Sec. I - S and PP, Sec. VIII - U, U2 and 4, Sec. III - NA and NPT.
Taylor Forge has also received ISO 9001 certification approval.
Our Certifications