SLUGGER CUTTERS

DISTRIBUTED BY:6.09

Airforce 45

SPECIFICATION DATA Cutter Capacity Twist Drill Capacity Air consumption Arbor Bore Stroke Cooling system Type of cooling fluid Height Length x Width, WeightMagnetic Base Dimensions Magnet dead lift (on 25mm plate)Order No.

The Airforce-45 is a pioneering 2 morse taper pneumatic drilling machine specifically designed for hazardous environments. It is the only pneumatic magnetic drill offering a built-in 2 morse taper systemallowing the use of twist drills up to 19mm and annular cutters up to 45mm.

45mm Ø x 2"depth of cut24 mm1400 I/min19 mm Weldon150 mmThrough ringWater solubleMin. 540 mm / Max. 680 mm363 x 262 mm, 19 kgs160 x 80 x 80 mm8000 N5610940045

Airforce 35

Features/Benefits:• Light weight & only 180 mm high• Great safety features & strong permanent magnet base

SPECIFICATION DATA WeightCutter Capacity Air consumptionTool holder Stroke Cooling system Type of cooling fluid Height x Length x Width Magnetic Base Dimensions Magnet dead lift (on 25 mm plate) Order No.

A compact pneumatic drill ideally suited to space restricted and hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry. Combining a pneumatic driveand permanent magnetic base eliminates the need of electric power supply.

13 kgs35 mm Ø x 1"depth of cut1400 I/min19 mm Weldon39 mmThrough ringOil or water soluble180 x 480 x 168 mm180 x 80 x 36.5 mm6500 N5610940035

DISTRIBUTED BY:6.10

MagBeast HM40 Auto

Features/Benefits:• Auto-feed - hands free operation for intense production drilling• Auto-feed control - consistent feed to the cutting load• Magnet safety control - shuts down motor when there is insufficient magnetic holding force• Motor overload - protects motor against damage• Reverse feed - manually operated by handles

Max. 410mm Min. 333mm213mm x 306mm, 17 kgs110v or 240v, 1100 Watts 360RPM4,720N on 25mm Plate90 x 180 x 48mm1066 kgs on 25mm Plate35mm Dia, x 2” Depth of Cut13mm w/ twist drill set5610919040

SPECIFICATION DATA HeightWidth x Length, WeightMotorDrill Point BreakawayMagnet Base DimensionsMagnet DeadliftCutter CapacityTwist Drill CapacityOrder No.

An amazing automatic drilling machine designed to provide a cost effect solution for drilling a high volume of holes with ease and efficiency.

MagBeast HM40

Features/Benefits:• Powerfull 1100 watt motor delivering 40mm cutting capacity.• Easily adapts for a 13mm chuck for use on twist drill applications.• External coolant system for extended tool life.

Min. 385mm Max. 505mm190mm (with handles) x 260mm, 12.7 kgs19 mm (¾”) & 40mm Ø x 2”depth of cut140 x 295mm1066 kgs on 25mm Plate40 mm Ø13mm Ø with optional attachment110v or 240v, 1100 Watts 440RPM5610919041

SPECIFICATION DATA HeightWidth x Length, WeightSpindle & Cutter CapacityMagnet Base DimensionsMagnet DeadliftCountersink CapacityTwist Drill CapacityMotorOrder No.

A drilling machine designed in lightweight and powerful for maximum performance.

A durable heavy duty 3 morse taper drilling machines. Also available in a tapping (HM100T) or swivel base (HM100S) option.

MagBeast HM100

Features/Benefits:• Heavy duty 1800 watt motor - Enables larger cutting capacity• Weighs on 20kgs and 100mm cutter capacity - Unrivalled weight to cutting capacity ratio• 4 speeds gear box (or 2 speed variable - HM100T) - Ideal for a wide selection of cutting operations• 250mm total drill travel - Facility to use 150mm (6") long cutters• Maintenance friendly twin slide rails - No wearing parts and adjustment free operation

WeightMax. Stroke Cutter Capacity Twist Drill Capacity Countersink Capacity Speed Variables in RPM

Height x Length x Width Magnet Base Magnetic Base DimsMagnet Deadlift (on 25mm plate)Voltage Order No.

20 kgs

4 fixed speeds : 110/ 175/ 245/ 385

5610919100

100 mm Ø x 6" depth of cut19 mm with 3MT chuck & 32 mm with 3MT twist drill

1800 Watts2 variables speeds:

60-140 / 200-470480 x 340 x 130 mm

102 x 212 mm

2050 kgs 110 or 240 Volts

5610919101

280 mm

4 fixed speeds: 110/ 175/ 245/ 385

Swivel 360 º

5610919102

MAGBEASTSPECIFICATION DATA

HM100HM100T

(TAPPING)HM100S(SWIVEL)

Fixed

21 kgs250 mm

SLUGGER CUTTERS

SLUGGER CUTTERS

DISTRIBUTED BY:6.11

MagBeast 2 mt

Features/Benefits:• Heavy duty 1300 Watts motor. • 2 speed gear box.• Compact design. • Excellent weight to power ratio.• 1 piece slide and gear box. • Simple gib backlash adjustment.• Maintenance friendly design. • 153mm stroke - ideal for twist drills.

SPECIFICATION DATA Cutter Capacity Twist Drill Capacity Countersink CapacityHeight Min/Max Length x Width & WeightRPM in 2 fixed speeds Magnetic Base Dimensions Motor Order No.

A new generation 2 morse taper magnetic drilling machine.

MagBeast 4 mt

Features/Benefits:• Soft start & powerful motor 1800 Watts • Overload protection with L.E.D indicator• Integrated gearbox housing with slide • Semi-automatic gib backlash adjustment• 4 speed gearbox & service friendly• Control Magnetic for Power Adhesion Control (MPAC) & Field Shape (MFSC)

A powerful 4 morse taper, heavy duty magnetic drill.

51 mm Ø x2" depth of cut23 mm50 mms ØMin 426 / Max 579 mm297 x 206 mm, 16.5 kgs200 / 400 RPM90 x 180 x 48 mm110 or 240 Volts, 1300 Watts5610930002

31 kgs110 mm Ø x 4" depth of cut47 mm & 63 mm110 or 240 Volts/ 1800 WattsMin 570 mm / Max 800 mm460 x 260 mm (with handles)85 / 135 / 160 / 250 RPM120 x 240 mm5610930004

SPECIFICATION DATA Weight Cutter Capacity Twist Drill & Countersink CapacityMotorHeight Length x Width RPM in 4 Fixed Speeds Magnetic Base Dimensions Order No.

MagBeast 5 mt

Features/Benefits:• An incredible 200 mm cutter capacity • M52 tapping capacity• Commanding 3000 Watts motor. • 4 variable speeds gearbox.

Designed for special, challenging applications no other portable magnetic drill has been able to solve before!

13kg35mm Ø x 1"depth of cut1400 I/min19 mm Weldon39 mmThrough ringOil or water soluble180 x 480 x 168 mm180 x 80 x 36.5 mm6500 N5610930005

SPECIFICATION DATA WeightCutter CapacityAir consumptionTool holderStrokeCooling systemType of cooling fluidHeight x Length x WidthMagnetic Base DimensionsMagnet dead lift (on 25mm plate)Order No.

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

YEW C

HEONG (A

SIAPA

C) PTE L

TD

Rail Petrol - Powerful, yet compact, light-weight machine equipped with a Honda 4 stroke engine specifically designed for drilling in rails.

Rail Machine - Petrol

Features/Benefits:• Fast positioning, quick clamp and instant unlocking mechanisms make it a safety conscious, user-friendly device.

SPECIFICATION DATA Power SupplyEngineMax. TorqueWeightDrilling Capacity - maxDepth of cut - maxMilling Capacity - maxStrokeArbor SpeedArbor HolderOrder No.

Honda Engine GXH502 HP (1,5kW)3.04 Nm at 4500 RPM23 kgs16 mm30 mm36 mm40 mmMin. 150 RPM / Max. 225 RPM19.05 mm5610950001

Rail Machine - Electric

Features/Benefits:• Fast positioning, quick clamp and instant unlocking mechanisms make it a safety conscious, user-friendly device.

SPECIFICATION DATA WeightDrilling CapacityCutter Capacity - maxDepth of cutStrokeMotorArbor BoreOrder No.

Powerful yet compact, light-weight machine specifically designed for drilling in rail tracks.

15.3 kg16 mm Ø36 mm Ø30 mm40 mm 110 or 240 Volts 1200 Watts 250 RPM1933 Weldon Shank5610950002

MiniBeast

Features/Benefits:• Compact size and weight, very ideal for site work.• Internal coolant reservoir for ensuring maximum cutter life.• Self correcting slide rails for maintenance free operation.• Light-weight (only 10kg) & hidden motor cable for added protection.

SPECIFICATION DATA Weight Cutter Capacity Twist Drill CapacityHeight Min/Max Length x Width Magnetic Base Dimensions Magnet Deadlift (on 25mm plate) MotorOrder No.

Compact and powerful, ideal for site or workshop use.

10 kgs30 mm Ø x2" depth of cut12 mm with twist drill setMin 307 / Max 377 mm240 x 166 mm80 x 160 mm980 kg110 or 240 Volts, 920 Watts, 350 RPM on Single Speed5610900201

DISTRIBUTED BY:6.12

SLUGGER CUTTERS

SLUGGER CUTTERS

HSS /TCT CuttersFeatures:• Save time and reduce cost using Jancy’s patented annular Slugger® cutters. With their unique centerfree design Slugger® cutters cut only the outer periphery of the hole, ejecting the remaining center as a solid slug. By having multiple cutting edges and only cutting the outer periphery of the hole Slugger® cutters reduce torque and horsepower requirements. Chip load per tooth is greatly reduced, allowing a high rate of penetration while improving hole quality and tool life. Regardless of diameter, Slugger® cutters produce reamed quality, burr-free holes in one operation, eliminating costly pilot holes and step drilling. Holes on curved surfaces and interrupted cuts are easily produced without distortion. Tooling is available to adapt Slugger® cutters quickly and easily to drill presses, milling machines, mag base drills, and C.N.C equipments. CAUTION: Safety glasses must be worn when operating Slugger® cutters or any other cutting tool.

HSS CutterDiameter

1213141516171819202122232425262728293031323334353637383940414243444546474849505152

Order No.1” Depth

56124025125612402513561240251456124025155612402516561240251756124025185612402519561240252056124025215612402522561240252356124025245612402525561240252656124025275612402528561240252956124025305612402531561240253256124025335612402534561240253556124025365612402537561240253856124025395612402540561240254156124025425612402543561240254456124025455612402546561240254756124025485612402549561240255056124025515612402552

2” Depth56124050125612405013561240501456124050155612405016561240501756124050185612405019561240502056124050215612405022561240502356124050245612405025561240502656124050275612405028561240502956124050305612405031561240503256124050335612405034561240503556124050365612405037561240503856124050395612405040561240504156124050425612405043561240504456124050455612405046561240504756124050485612405049561240505056124050515612405052

3” DepthNANANANANANANANA

561240752056124075215612407522561240752356124075245612407525561240752656124075275612407528561240752956124075305612407531561240753256124075335612407534561240753556124075365612407537561240753856124075395612407540561240754156124075425612407543561240754456124075455612407546561240754756124075485612407549561240755056124075515612407552

Order No.56111160015611116002561111600356111160045611116005

Pilot Fits Cutters Sizes1” Depth 1/2“ Dia. & Smaller2” Depth 1/2“ Dia. & Smaller1” Depth 1/2“ Dia. & Larger2” Depth 1/2“ Dia. & LargerAll Standard 3” Depth

TCT CutterDiameter

14151617181920212223242526272829303132333435363738394041424344454647484950

Order No.1 3/8” Depth5612413514561241351556124135165612413517561241351856124135195612413520561241352156124135225612413523561241352456124135255612413526561241352756124135285612413529561241353056124135315612413532561241353356124135345612413535561241353656124135375612413538561241353956124135405612413541561241354256124135435612413544561241354556124135465612413547561241354856124135495612413550

2” Depth5612415014561241501556124150165612415017561241501856124150195612415020561241502156124150225612415023561241502456124150255612415026561241502756124150285612415029561241503056124150315612415032561241503356124150345612415035561241503656124150375612415038561241503956124150405612415041561241504256124150435612415044561241504556124150465612415047561241504856124150495612415050

Order No.56111160355611116050

Pilot Fits Cutters SizesPilot Pin for 35mm x 0.8mmPilot Pin for 50mm x 0.8mm

DISTRIBUTED BY:6.13