slump cone test
TRANSCRIPT
FIRE PROOFING SLUMP CONE TEST
Fendolite MII (20 kg) & water (15 to 19 litres) being mixed in mixer
FIRE PROOFING SLUMP CONE TEST
Mixing for 3 minutes the mixture of Fendolite MII & water in mixer
After 3 minutes of mixing time, Fendolite MII & water mixture sample removed from mixer into bucket for slump cone test
FIRE PROOFING SLUMP CONE TEST
Pouring the Fendolite MII & water mixture sample in empty 1 litre container
FIRE PROOFING SLUMP CONE TEST
Pouring the Fendolite MII & water mixture sample in 1 litre container
FIRE PROOFING SLUMP CONE TEST
Fully poured Fendolite MII & water mixture sample in 1 litre container.
Scraping off the excess sample upto the brim level
FIRE PROOFING SLUMP CONE TEST
Gradually lifting & removing the 1 litre container allowing Fendolite MII & water mixture sample to slump.
FIRE PROOFING SLUMP CONE TEST
From centre of Fendolite MII & water mixture sample to plastic container brim the slump reading should be within 40 to 55 mm. Observed slump 50 mm.