sm 142011
TRANSCRIPT
-
7/28/2019 Sm 142011
1/16
SM-14Hydraulic Microdrilling Rig
SM-14ANCHORING
TIE-BACKSMICROPILES
JET GROUTINGCORING
WATER WELLSTUNNELLING
-
7/28/2019 Sm 142011
2/16
Safety
Designed to comply with EN and ISO safety
standards.
SM-14 is manufactured, tested and
certified to give maximum operatorprotection
Hydraulic board control and remote
board control (on request) are designed
for operator comfort and ease of use
Built-in safety devices in order to reduce
any possible accidental operation
Operators view is increased to give
a better visibility and guarantee the
maximum safety condition.
Easy and safe accessibility to the bonnet
for maintenance and inspection
Reduced environmental impact with
lower noise levels, reduction in exhaust
emissions and improved fuel economy
Performances
Versatile multipurpose rig for a wide range
of possible civil engineering applications.
The use of powerful engines, high
standard components and advanced
circuit design has enabled Soilmec to
increase performance and reliability
under extreme conditions.
Range of high performance rotaries
available.
Smart and compact design for fastassembly and easy transport.
Minimum operating cost.
The Soilmec advantage
The Soilmec advantage
A real multifunctional machine designed
from scratch to give you the best drilling
solution
Long life expectancy with a high residual
valueBest price/performance ratio
Built with customer in mind
Quality
Each micro drilling rig is subject to
extensive testing prior to dispatch.
Soilmec Quality System complying with
ISO 9001:2000 and ISO 14001:2004
standards.
Low maintenance requirements thanksto components of the highest quality.
Soilmec constant support thanks to
quick acting after sales service, reliable
customer care, efficient spare parts
service and fast delivery.
-
7/28/2019 Sm 142011
3/16
Undercarriage
Machine Body
Hydraulic Outrigger
Kinematic mechanism
Mast
Rotary Cradle
Rotary
Floating System
Clamp
Breaker
Control Board
Service Winch with Jib
1
5
3
7
9
2
6
4
8
10
11
12
5
67
8
12
10
9
4
111 2 3Cummins QSB 4.5 Tier III*
Power @ 2000 rpm 123 kW 165 HP
Operating weight (approx) 13400 kg 29542 lbs
Feed / retraction force 89 kN 20008 lbf*Gears motors crowd system on request
-
7/28/2019 Sm 142011
4/16
VERTICAL WORKING CONDITION
Soilmec SM-14 is a multipurpose drilling
rig. Its modular design is engineered for the
execution of:
Micropiles, Tie-backs, Jet-Grouting,
Coring, Drain, Water wells.The rig is fitted with proportional, hydraulic
servo-assisted controls that make the
operations smooth and trouble free
even in the hardest weather conditions.
Featured with Load Sensing System, it
has lower running costs and a reduced
wear and tear on components.
-
7/28/2019 Sm 142011
5/16
VERTICAL WORKING CONDITION
-
7/28/2019 Sm 142011
6/16
TECHNICAL DATA
Soilmec SM-14 may be further tailored with a wide range of optional
items such as:
Jet-Grouting kit for mono, bi or three fluids treatment and
steeples lifting speed for 127 mm rods;
90 mast articulation for tie-back drilling (twin cylinder);
Mast rotation by motoreducer for +_ 180;
Mast for 1.5, 1.8, 2.1, 3, 4 and 7 m stroke;
Service crane for handling of drilling rods and for rods &
casing;
Foam Pump;
Dust collector;
Radio operated remote control;
Rod carousel 6x114 and 10x114.
Standard Equipment Optional Equipment
Soilmec SM-14 versatility unit that can be tailored to any customer
need or geological conditions:
Variable speed or 3-speeds gear box;
Hydraulic drifter;
Vibrorotary;
Rotop;
Double Head.
Operating weight : 13400 kg 29542 lb
Hoist & Feed system
Feed type Jack Gear motors Gear motors Jack Gear motors Gear motors
Feed stroke 4000 mm 4350 mm 7000 mm 157 in 171 in 275.5 in
Maximum hoist pull 89 kN 87 kN 87 kN 20008 lbf 19558.3 lbf 19558.3 lbf
Maximum feed force 45 kN 87 kN 87 kN 10116.4 lbf 19558.3 lbf 19558.3 lbf
Service winch
Line pull (1st layer): 20 kN 40 kN 40 kN 8992.3 lbf 8992.3 lbf 8992.3 lbf
Rope diameter: 10 mm 10 mm 10 mm 0.4 in 0.4 in 0.4 in
Clamp & hydraulic joint breaker
Nominal size 50-315 mm 50-360 mm 60-415 mm 2-12.4 in 2-14 in 2.4-16 in
Maximum clamping force 266 kN 266 kN 266 kN 59799 lbf 59799 lbf 59799 lbf
Maximum breaking torque 5060 daNm 5060 daNm 5060 daNm 37320.5 lbf.ft 37320.5 lbf.ft 37320.5 lbf.ft
Jet grouting
Rod diameter 127*-114-90 mm 127*-114-90 mm 127*-114-90 mm 5-4.5-3.5 in 5-4.5-3.5 in 5-4.5-3.5 in
Max treatment depth w single pass 16 m 16 m 14,9 m 52.5 ft 52.5 ft 48.8 ft
Drill guide extension 2 + 10 m 2 + 10 m 2 + 8 m 6.5 + 32.8 ft 6.5 + 32.8 ft 6.5 + 26.2 ft
*special kit
-
7/28/2019 Sm 142011
7/16
Type variable variable
Max torque 1207 daNm 8902 lbf.ft
Max speed 277 rpm 277 rpm
Hollow shaft 114 mm 4,5 in
TECHNICAL DATA - ROTARY DRIVE
HR-12
HR-13
HR-14
HR-8G
Type 3 gear box 3 gear box
Max torque 1290 daNm 9514 lbf.ft
Max speed 429 rpm 429 rpm
Hollow shaft 114 mm 4,5 in
Gear box type 3 hydraulic shift gears 3 hydraulic shift gears
Type variable variable
Max torque 1356 daNm 8902 lbf.ft
Max speed 229 rpm 229 rpm
Hollow shaft 114 mm 4,5 in
Type 4 gear box 4 gear box
Max torque 823 daNm 6070 lbf.ft
Max speed 220 rpm 220 rpm
Hollow shaft 66 mm 2,6 in
Gear box type 2 hydraulic + 2 mechanical shift gears 2 hydraulic + 2 mechanical shift gears
-
7/28/2019 Sm 142011
8/16
TECHNICAL DATA
* Electrical engine is available on request
Diesel Engine*
Model Cummins QSB 4.5 Tier III Cummins QSB 4.5 Tier III
Rated output ISO 3046-I 123 kW @ 2000 rpm 165 HP @ 2000 rpm
Engine conforms to Exhaust emissionStandard
UE 2004/26/CE Stage IIIA - US EPAnonroad Tier 3
UE 2004/26/CE Stage IIIA - US EPAnonroad Tier 3
Diesel tank capacity 200 l 53 US gal
Sound power level & Sound pressure level LWA 105 - LpA 81 dB(A) LWA 105 - LpA 81 dB(A)
Hydraulic system
Main pumps: variable axial pumps L.S. 156+156 l/min 41+41 US gal/min
Set pressure main pumps 28 MPa 280 bar
Auxiliary pumps: gear pumps 20 l/min 5 US gal/min
Hydraulic oil tank capacity 400 l/min 106 US gal/min
Undercarriage
Chain class and pitch FL4R/B1 - 140mm steel
Track shoe width 400 mm 15,8 in
Overall length 3062 mm 120,5 in
Overall width 2300 mm 90,5 in
Traction force 123 kN 29674 lbf
Travelling speed 2,7 km/h 1,7 mile/h
Average ground pressure 0,07 MPa 0,7 bar
-
7/28/2019 Sm 142011
9/16
TRANSPORT DATA
Mass & Transport
Transport width 2300 mm 90,5 in
Transport height 2716 mm 107 in
Transport length 9915 mm 390,5 in
Transport weight 13000 kg 28660 lb
-
7/28/2019 Sm 142011
10/16
WORKING MOVMENTS
-
7/28/2019 Sm 142011
11/16
WORKING MOVEMENTS
-
7/28/2019 Sm 142011
12/16
Clamp and breaker
Clamp and breaker assembly complete with
new high-quality flow divider
Hydraulic clamping and breaking device for
drill tubes up to 415 mm (8,66in). Maximum
clamping force kN 266 (lbs 31473) Maximum
breaking torque daNm 5060 (lb/ft 22126)
Rotary
Soilmec rotaries, designed and manufactured
to meet the need for increased production
and performance on various applications,
with the added benefit of increased
component life and reliability.
RIG FEATURES
-
7/28/2019 Sm 142011
13/16
Control board on rotating and pivoting arm for drilling and service
functions.
RIG FEATURES
Drilling Control Board
-
7/28/2019 Sm 142011
14/16
SOILMEC MICRODRILLING RIGS
* by Puntel
SM-3 SM-5 SM-5 G SM-8 SM-8 G SM-8 GT SM-10
Weight Weight Weight Weight Weight Weight WeightOperating weight:
3,5t +2,5 t
Operating weight:
5,6 t
Operating weight:
5,5 t
Operating weight:
8,5 t
Operating weight:
8,3 t
Operating weight:
9 t
Operating weight:
9 t
Rotary Rotary Rotary Rotary Rotary Double Rotary Rotary
Max torque:
up to 2000 daNm
Max torque:
972 daNm
Max rpm:
862
Max torque:
1024 daNm
Max rpm:
822
"Max torque:
1663 daNm
Max torque:
1300 daNm
Max torque: 816 daNm
Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system
Hoist force:
40 kN
Hoist force:
40 kN
Hoist force:
60 kN
Hoist force:
60 kN
Hoist force:
100 kN
Hoist force:
100 kN
Hoist force:
80 kN
Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke
Max feed stroke:
2400 mm
Max feed stroke:
2400 mm
Max feed stroke:
3400 mm
Max feed stroke:
3800 mm
Max feed stroke:
3750 mm
Max feed stroke:
3750 mm
Max feed stroke:
4000 mm
Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly
Max Max Range:
50-220 mm
Max Range:
50-220 mm
Max Range:
50-220 mm
Max Range:
60-315 mm
Max Range:
60-260 mm
Max Range:
60-260 mm
Max Range:
60-320 mm
Engine Engine Engine Engine Engine Engine Engine
Separeted diesel power
pack 85 kW
Deutz TCD2011-L04 W
diesel engine 72 kW
Deutz TCD2011-L04 W
diesel engine 72 kW
Deutz TCD2012-L04
diesel engine 85 kW
Deutz TCD2012-L04
diesel engine 85 kW
Deutz TCD2013-L04 2V
diesel engine 116 kW
Deutz TCD2013-L04 2V
diesel engine 116 kW
Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology
Micropiles - Anchorings Micropiles - Anchorings -
Tunnelling
Soil investigation -
Micropiles
Micropiles - Anchorings Soil investigation -
Micropiles
Geothermal - Double
rotary
Micropiles - Anchorings -
Tunnelling
Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available
Jet grouting - Soil
investigation
Jet grouting - Soil
investigation - Top
Hammer
Jet grouting - Top
Hammer
Jet grouting - Soil
investigation - Top
Hammer
Jet grouting - Top
Hammer
Jet grouting - Double
Rotary - Soil investigation
-Top Hammer
-
7/28/2019 Sm 142011
15/16
SOILMEC MICRODRILLING RIGS
SM-14 SM16G SM-16 GT SM-18 SM-20 SM-21 SM-30
Weight Weight Weight Weight Weight Weight WeightOperating weight:
14 t
Operating weight:
16 t
Operating weight:
17 t
Operating weight:
19 t
Operating weight:
21 t
Operating weight:
22 t
Operating weight:
33 t
Rotary Rotary Rotary Rotary Rotary Rotary Rotary
Max torque:
1750 daNm
Max rpm:
1000
"Max torque:
3200 daNm
Max torque:
3700 daNm
Max torque:
2160 daNm
Max torque:
3700 daNm
Max torque:
3650 daNm
Max torque: 1100 daNm
Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system
Hoist force:
89 kN
Hoist force:
195 kN
Hoist force:
195 kN
Hoist force:
113 kN
Hoist force:
83 kN
Hoist force:
141 kN
Hoist force:
120 kN
Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke
Max feed stroke:
7000 mm
Max feed stroke:
4000 mm
Max feed stroke:
4000 mm
Max feed stroke:
9800 mm
Max feed stroke:
10200 mm
Max feed stroke:
10200 mm
Max feed stroke:
14200 mm
Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly
Max Range:
60-415mm
Max Range:
60-320 mm
Max Range:
60-320 mm
Max Range:
60-415mm
Max Range:
320-550 mm
Max Range:
60-415mm
Max Range:
60-415mm
Engine Engine Engine Engine Engine Engine Engine
Cummins QSB 4.5
diesel engine 119 kW
Deutz TCD2013-L06 2V
diesel engine 176 kW
Deutz TCD2013-L06 2V
diesel engine 176 kW
Deutz TCD2013-L06 2V
diesel engine 176 kW
Deutz TCD2012-L06
diesel engine 135 kW
Deutz TCD2013-L06 2V
diesel engine 176 kW
Cummins QSB 6.7
diesel engine 164 kW
Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology
Micropiles - Anchorings Soil investigation -
Micropiles
Geothermal - Double
rotary
Micropiles - Anchorings Micropiles - Anchorings Micropiles - Anchorings Jet grouting
Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available
Jet grouting - Double
Rotary - Top Hammer -
Vibro rotary
Jet grouting - Top
Hammer
Vibro rotary Jet grouting - Double
Rotary - Top Hammer
Jet grouting - Double
Rotary - Top Hammer -
Vibro rotary
Jet grouting - Double
Rotary - Top Hammer
Micropiles - Top
hammer
-
7/28/2019 Sm 142011
16/16
www soilmec it
Alltechnicaldataarepurelyindicativeandsubjecttochangewithoutnotice
03/2011-100-D/F
-DigitalPrint
SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and dealers.
The complete Soilmec network list is available on the webpage www.soilmec.it