SM-CS-ART2-LSM-CS-ART2-XL

Strong™ Contractor Series Universal Articulating Mount With Dual Arms

INSTRUCTION MANUAL

WARNINGS:• Makesuretheseinstructionsarereadandthoroughlyunderstoodbeforeattemptinginstallation.Ifyouareunsureofanypartoftheinstallation

process,contactaprofessionalinstallerforassistance.

• Thewallormountingsurfacemustbecapableofsupportingthecombinedweightofthemountandthedisplay;otherwisethestructuremustbereinforced.Installerisresponsibleforverifyingthewall/mountingsurfaceandtheanchorsusedcansupportthetotalloadoftheinstallation.

• Safetygearandpropertoolsmustbeused.Failuretodosocanresultinpropertydamageand/orseriousinjury.

• Aminimumoftwopeopleisrequiredforthisinstallation.Donotattempttoinstallthismountaloneunderanycircumstance.Wehighlyrecom-mendthisproductbeinstalledbyaqualifiedprofessionalperson.

• Followallinstructionsandrecommendationsregardingadequateventilationandsuitablelocationsformountingyourdisplay.Consulttheowner’smanualforyourdisplayformoreinformation.

PACKAGE CONTENTS:

SPECIFICATIONS:• MaximumLoad:150lbs.(68.04kg)

• DisplaySize:42”to63”

• MaximumExtension:30-5/8”

• Wiremanagement

• Pan/SwivelRange:180°

• TiltRange:-5°/+15°

BOX CONTENTS:• WallArmAssembly(1)

• AdapterBracket(2)

• AdapterPanel(1)

• Hardwarekit(1)

TOOLS REQUIRED: • PowerDrill

• 1/4”&5/16”DrillBits

• Level

• 13mm(1/2”)SocketWrenchorShifter

• Hammer

• StudFinder

(A)M4x15mmPhilipsHeadScrew(x4)

(D)M8x15mmPhilipsHeadScrew(x4)

(N)M6x12mmPhilipsHeadScrew(x4)

(O)M8x15mmPhilipsHeadScrew(x4)

(P)36.2x36.2x2.5mmSquareWasher

(Q)M10x70ConcreteWallAnchors(x6)

(R)6x13x1.2mmMetalWasher(x4)

(S)AllenKey(x1)

(T)RecessedHoleSpacer(x4)

(U)Spacer(x4)

Template(x1)

WireManagementCaps

WallArmAssembly(x1)

AdapterBracket(x2)

AdapterPanel(x1)

(E)M4x35mmPhilipsHeadScrew(x4)

(F)M5x35mmPhilipsHeadScrew(x4)

(G)M6x35mmPhilipsHeadScrew(x4)

(H)M8x35mmPhilipsHeadScrew(x4)

(I)M4x45mmPhilipsHeadScrew(x4)

(K)M6x45mmPhilipsHeadScrew(x4)

(J)M5x45mmPhilipsHeadScrew(x4)

(L)M8x45mmPhilipsHeadScrew(x4)

(M)FlangeBolt(x6)

(B)M5x15mmPhilipsHeadScrew(x4)

(C)M6x15mmPhilipsHeadScrew(x4)

CAUTION: This wall mount is intended for use only with the maximum weight of 150 lbs. Use with heavier than the maximum weight indicated may result in instability causing possible injury.

M4x20PhilipsHeadScrew(x4)

M5x20PhilipsHeadScrew(x4)

M6x20PhilipsHeadScrew(x4)

M8x20PhilipsHeadScrew(x4)

PG 1

INSTALLATION

Step 1: Use template to mark mounting hole locations for flange boltsNote:Cornersfolduptocatchdebris,ifneeded.

Step 2: Pre-drilling

For Mounting on a Stud WallPre-drillholesintostudsusinga1/4”drillbit.

WARNING:

Tighten screws so that wall plate is firmly attached, but do not overtighten. Overtightening can dam-age the screws, greatly reducing their holding strength.

Make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.

For Mounting on a Concrete Wall

Pre-drillholesintoconcreteusing5/16”drillbits.Insertconcretewallanchorsandtapinwithhammer,ifnecessary.

WARNING:

When installing wall arm assembly on cinder block, verify first that you have a minimum of 1-3/8” of concrete thickness to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally1” minimum from the side of the block. Cinder block must meet ASTM C-90 specifications. It is suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity.

Concrete must be 2000 psi density minimum. Lighter density concrete may not hold con-crete anchor.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

Drill holes and insert anchors.

Place wall assembly arm with plate

over anchors and secure bolts.

Tighten all fasteners.

flange bolts

wall plate

concretewall

Correct

concreteconcrete

plaster/drywall

plaster/drywall

Incorrect

Cuta

way

Vie

w

PG 2

Step 3: Mount the Arm Assembly

For Mounting on a Stud Wall or Concrete Wall

Insertflangeboltsthroughthewallplateintothestudsorthewall

anchors.WhenInstallingonconcrete,6boltsareneeded.Insertfour

throughtopsetofholes;twoonthefarholes,andtwonearthecenter.

Inserttheremainingtwoboltsonthebottomsetofholes.

Step 4 : Mounting the Assembled Adapter Plate to Screen

Modify the Assembled Adapter Plate

SlidetheAdapterBracketsontoAssembledAdapterPlate

rods.PlacetheassembledAdapterPlateonthebackofthe

displaywithoneAdapterBracketalignedwithasetofvertical

mountingholes.Then,slidetheotherAdapterBracketinor

outuntilitalignswiththesecondsetofverticalmounting

holes.TheAdapterPlateshouldbehorizontallycenteredonthe

backoftheflatpaneldisplay.

UsefourM6x12screwsandfourmetalwashersandtighten

AdapterBracketstoAdapterPlaterodswithaPhillipsHeadScrew

Driver.

NOTE: There are eight positions for flexibility. Move the Adapter Brackets to desired location. Adapter Brackets can be flipped around (if required).

AttachtheAdapterBracketsusingfourmountingscrewsand

foursquarewashers(sizewilldependonthreadpatternonflat

panelbeinginstalled).Oncealigned,tightenallscrewsdown

withaPhillipsHeadScrewDriver.

InserttwoM8HexheadscrewsonthetopoftheAdapterPlate

withtheM6AllenWrench.DO NOT IMMEDIATELY TIGHTEN

DOWN!

M8 Hex head screws w/washers

Back ofDisplay

MountingScrew

Square Washer

Adapter Plate

AdapterBracket

Metal Washer(6 x 13 x 1.2)

M6 x 12Screw

PG 3

Mounting Head

Tilt Levers

M8 Hex head screws w/washers

wall plateCONCRETE WALL

wall anchor

flange bolt

Step 5: Attaching Screen to Wall Arm Assembly

LiftthedisplayandhookthetwoHexheadscrews

withmetalwashersingroovesontopoftheMounting

Head.InserttwomoreHexheadscrewswithwashersin

bottomtwoholesoftheMountingHead,securingitto

theAdapterPlate.Thentightenallfourscrewswiththe

AllenWrench.

NOTE: For demonstration purposes, the wall has been omitted from the illustrations.

NOTE: This procedure will require two persons. Ensure that the arm is set to its maximum negative tilt prior to attaching the display.

Step 6: Running Cables

RunasshownandinstallWireManagementCaps.

NOTE: Make sure cords have enough slack to allow full movement of the arm.

Wire Management Caps

Figure 14Rubber AdhesiveSafety Pads (W)

Figure 15

PG 4

ADJUSTMENTS:Adjust Horizontal Level and TiltStep 5: Tilt Adjustment

A. LoosenTilt Leversoneachsideofmounthead

(Onlyenoughtoallowcontrolledadjustment)

B. AdjustTilt

C. LockTilt Levers( Tighten)

D. OnceTilt Leversarelocked,thepositionofthe

leverscanbeadjusted,withoutlooseningor

tighteningtheunit, bypullingtheleversoutwards

andthenrepositioningthemtoavertical, less

obtrusiveposition.

Step 6: Horizontal Adjustment

A. Toadjustthehorizontalangleofthedisplay,f irstsl ightlyloosenthetoptwoscrewsonbacksideofWall ArmAssemblymountingheadusingAllenKey( T ). Thenfirmlyholdoppositecornersofthedisplayandgentlyturnit intothedesiredposition.Whenlevel, re -tightenscrewstolockintheposition.

OTHER FEATURES:Cable ManagementInstall cordcoversasshown.Besuretoleaveenough

slacktoallowformovementofthearms.

Optional Adhesive Rubber PadIncludedwithhardwarepackarerubberpads(W )

forcushioningimpactofarmagainstthewall when

retractingmount.Placepadsonoppositesideofcable

managementcoverswherepossibleimpactpointswill

occur.

PG 5

CONTACTING TECHNICAL SUPPORT

Phone: (866) 838-5052Email: Techsupport@snapav.com

PG 6

LIFETIME LIMITED WARRANTY

Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap AV or a designated service center with prior notification and an assigned return authorization number (RA).

Lifetime

120822-1100©2012STRONG

engineered by