small battery drive. for orthopaedic trauma applications.synthes.vo.llnwd.net/o16/llnwmb8/us...
TRANSCRIPT
Small Battery Drive. For orthopaedictrauma applications.
Ergonomic, lightweight design
Compatible with a wide variety ofattachments
Variable speed trigger with instant reverse and oscillation
Synthes 1
Small Battery Drive. For orthopaedic trauma applications.
The Small Battery Drive (532.010) is indicated for most orthopaedic trauma applications, including drilling, sawing,inserting K-wires, DHS, DCS and intramedullary reaming. Optimal performance can be achieved by selecting the appropriate battery for the specific application.
Features– Ergonomic, lightweight design
– Batteries retain life longer than autoclaved batteries
– Two battery sizes for wider range of indications
– Compatible with a wide variety of attachments
– Fully cannulated to 3.2 mm
– Variable speed trigger with instant reverse and oscillation
Specifications– Variable speed: 0–3,840 rpm
(max. speed varies by attachment)
– Maximum torque: 0–6.0 Nm (max. torque varies by attachment)
– Weight, including 12 V battery: 810 grams, including 14.4 V battery: 916 grams
– Cannulation: 3.2 mm
Specifications for batteries– Capacity: 0.5 Amp hours
– Type: NiCd
– Working temperature: 0°C to 50°C (32°F to 122°F)
– Discharge protection: prevents total battery discharge, significantly decreases memory effect, maintains battery capacity, and increases battery life
532.010
Battery Casing(532.002)
Mode switch turnsdrive off for safe attachment exchangeand selects “on” or“oscillation” mode
12 V Battery (532.003)– Voltage: 12 VDC
– Charging time: 30 minutes maximum
– Indications include drilling, sawing,and inserting K-wires
14.4 V Battery (532.033)– Voltage: 14.4 VDC
– Charging time: 40 minutes maximum
– Indications include DHS, DCS, and intramedullary reaming
2 Synthes Small Battery Drive
Small Battery Drive. For orthopaedic trauma applications.
Sawing Drilling K-wire insertion
Reaming
Small Battery Drive Synthes 3
Attachments for Small Battery Drive
532.011 Mini Quick Coupling
532.012 Stryker J-Latch Coupling
With 12 V battery:
Maximum speed: 3,200 rpm
Maximum torque: 0.5 Nm
With 14.4 V battery:
Maximum speed: 3,840 rpm
Maximum torque: 0.6 Nm
Accepts mini quick coupling or Stryker J-Latch drill bits
532.022 Quick Coupling for K-Wires
Cannulation: 3.2 mm (fully open)
With 12 V battery:
Maximum speed: 800 rpm
Maximum torque: 3.0 Nm
With 14.4 V battery:
Maximum speed: 900 rpm
Maximum torque: 2.3 Nm
To insert / remove Kirschner wires and guidepins 0.6 mm–3.2 mm in diameter (any length)
05.001.250 AO Quick Coupling for Drill Bits
Cannulation: 2.1 mm
Accepts cutting tools and instruments withthe AO quick coupling fitting
05.001.252 Small Chuck with Key
Cannulation: 3.3 mm
Accepts round and triangular shafts: up to 4.5 mm
* Performance specifications on file at Synthes.
Drilling speed attachments
The following drilling speed attachments are geared for amaximum drive speed of 1,200 rpm with the 12 V battery and 1,440 rpm with the 14.4 V battery. The maximum torque is 1.3 Nm with the 12 V battery and 1.6 Nm with the 14.4 V battery.*
4 Synthes Small Battery Drive
05.001.253 Large Chuck with Key Cannulation: 3.3 mm
Accepts round and triangular shafts: up to 7.3 mm
* Performance specification on file at Synthes.
05.001.251 AO Screw Attachment Cannulation: 2.0 mm Accepts AO coupling screwdriver
The following reaming speed attachments are geared for a maximum speed of 384 rpm and a maximum torque of 6.0 Nm with the 14.4 V battery.* All reduction drive units allow intramedullary reaming with most IM nail systems.
Note: The reaming speed attachments should only be usedwith the 14.4 V battery for optimal performance.
Reaming speed attachments
Attachments for Small Battery Drive
Drilling speed attachments continued
Saw attachments
532.023 Oscillating Saw Attachment II
Maximum speed: With 12 V battery=
15,000 oscillations per minute
With 14.4 V battery= 18,000 oscillations per minute
532.026 Oscillating Saw Attachment, large
Maximum speed: With 12 V battery=
15,000 oscillations per minute
With 14.4 V battery= 18,000 oscillations per minute
532.021 Sagittal Saw Attachment
Maximum speed: With 12 V battery= 15,000 oscillations per minute
With 14.4 V battery= 18,000 oscillations per minute
Small Battery Drive Synthes 5
05.001.254 Chuck with Key Cannulation: 3.2 mm Accepts round and triangular shafts:
up to 7.3 mm
532.015 Large Quick Coupling
Cannulation: 3.2 mm
Accepts DHS and DCS triple reamers, screwdriver shafts and cannulated drill bitswith large quick coupling fitting
532.017 AO Reduction Drive Unit
Cannulation: 3.2 mm
Accepts cutting tools and instruments withAO reaming fitting
532.018 Hudson Reduction Drive Unit
Cannulation: 3.2 mm
Accepts cutting tools and instruments withHudson fitting
532.019 Trinkle Reduction Drive Unit
Cannulation: 3.2 mm
Accepts cutting tools and instruments withTrinkle fitting
532.020 Modified Trinkle Reduction Drive Unit
Cannulation: 3.2 mm
Accepts cutting tools and instruments withmodified Trinkle fitting
6 Synthes Small Battery Drive
Battery Pack Assembly
Batteries and battery charger– Advanced battery technology and
nonautoclavable batteries prevent total battery discharge, significantlydecrease memory effect, maintainbattery capacity, and increase battery life
– One battery charger for all Synthespower equipment batteries simplifiescharging process
– Intuitive assembly of battery pack
Battery pack assembly– Allows use of nonsterile batteries
to increase battery life
– Encloses battery within sterile field
Scrubbed person1 Hold the sterilized battery casing
and open the lid.
2 Place the sterilized battery insertionshield on the battery casing.
Circulating person3 Carefully insert the nonsterile battery
into the sterile battery casing.
4 Press firmly until it engages.
5 Remove the battery insertion shield.
Scrubbed person6 Close and lock the lid.
1 2
3 4
5
Circulatingperson
Circulatingperson
Scrubbed person
Scrubbed person
Scrubbed person
Scrubbed person
Scrubbed person
Circulatingperson
Small Battery Drive Synthes 7
Small Battery Drive Set (105.955)
Graphic Case60.550.010 Base Assembly for Small Battery Drive
Graphic Case
60.550.011 Lid for Small Battery Drive Graphic Case
60.550.012 Attachment Rack for Small Battery DriveGraphic Case
60.550.013 Insert Tray for 12 V Battery Casings
60.550.016 Insert Tray for Small Battery Drive Handpiece and Radiolucent Drive
Instruments05.001.250 AO Quick Coupling for Drill Bits
05.001.253 Large Chuck with Key, Drilling Speed
05.001.204 Universal Battery Charger II
532.002 Battery Casing, for 12 V Battery, 2 ea.
532.003 Small Battery Drive 12 V Battery, 2 ea.
532.004 Battery Insertion Shield, 2 ea.
532.010 Small Battery Drive
532.011 Mini Quick Coupling
532.012 Stryker J-Latch Coupling
532.015 Large Quick Coupling
532.021 Sagittal Saw Attachment
532.022 Quick Coupling for K-Wires
60.550.013
60.550.010, 60.550.011 and 60.550.012
60.550.016
8 Synthes Small Battery Drive
Graphic Case60.550.010 Base Assembly for Small Battery Drive
Graphic Case
60.550.011 Lid for Small Battery Drive Graphic Case
60.550.012 Attachment Rack for Small Battery Drive Graphic Case
60.550.013 Insert Tray for 12 V Battery Casings
60.550.014 Insert Tray for 14.4 V Battery Casings
60.550.016 Insert Tray for Small Battery Drive Handpiece and Radiolucent Drive
Instruments05.001.250 AO Quick Coupling for Drill Bits
05.001.253 Large Chuck with Key, Drilling Speed
05.001.204 Universal Battery Charger II
532.002 Battery Casing, for 12 V Battery, 2 ea.
532.003 Small Battery Drive 12 V Battery, 2 ea.
532.004 Battery Insertion Shield, 2 ea.
532.010 Small Battery Drive
532.011 Mini Quick Coupling
532.012 Stryker J-Latch Coupling
532.015 Large Quick Coupling
532.017 AO Reduction Drive
532.021 Sagittal Saw Attachment
532.022 Quick Coupling for K-Wires
532.031 Adaptor for Radiolucent Drive
532.032 Small Battery Drive Casing, for 14.4 V Battery, 2 ea.
532.033 Small Battery Drive 14.4 V Battery, 2 ea.
Small Battery Drive with 14.4 V Battery Pack Set (105.954)
60.550.01460.550.013
60.550.010, 60.550.011 and 60.550.012
60.550.016
Small Battery Drive Synthes 9
511.30
Instruments05.001.108 Light Adaptor for Small Battery Drive, for Electric Pen Drive
05.001.251 AO Screw Attachment
05.001.252 Small Chuck with Key, Drilling Speed
05.001.254 Large Chuck with Key, Reaming Speed
310.93K Replacement Key for Small Chuck with Key(05.001.252)
510.19 Replacement Key for Large Chucks(05.001.253 and 05.001.254)
511.30 Radiolucent Drive
519.40 Cleaning Brush
519.97 Autoclavable Oil
532.023 Oscillating Saw Attachment II
532.026 Oscillating Saw Attachment, large
532.018 Hudson Reduction Drive Unit
532.019 Trinkle Reduction Drive Unit
532.020 Modified Trinkle Reduction Drive Unit
Graphic Case60.550.015 Insert Tray for Small Battery Drive Adaptor
for Electric Pen Drive60.550.017 Insert Tray for Two Small Battery Drive
Handpieces60.550.018 Label Sheet for Small Battery Drive Set
Attachment Rack
690.525 Small Graphic Case for Small Battery Drive Set
690.576.04 Grommets for Attachment Rack for Small Battery Drive Graphic Case, 4 pack
Service and Extended Warranty ProgramsW1.105.955 One-Year Extended Warranty and Service
Program, for Small Battery Drive Set
W3.105.955 Three-Year Extended Warranty and ServiceProgram, for Small Battery Drive Set
Also Available
05.001.252
Synthes Anspach4500 Riverside DrivePalm Beach Gardens, FL 33410Telephone: (561) 627-1080To order: (800) 327-6887Fax: (800) 327-6661E-mail: [email protected]
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
www.synthes.comwww.anspach.com
© 2002 Synthes, Inc. or its affiliates. All rights reserved. DCS, DHS and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 1/12 J3992-F