Small Block ChevroletShort Pump Mid-mount

Alternator/Power Steering Bracket Kit(1964-67 Chevelle)

148000

908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 1 OF 11

18865 Goll St. San Antonio, TX 78266 ph: 210-654-7171 fax: 210-654-3113

2908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 2 OF 11

TM

Bracket Systems

-

Table of Contents 1. Cover 2. Table of Contents 3. Packing List/Parts Disclaimer 4. Dimensional References 5. OEM Bolt Removal & Alternator Side Mounting Bracket Installation Figure 1 6. Alternator Side Mounting Bracket Installation (Cont.) & Power Steering Pump Bracket Installation 7. Alternator Adjuster Bracket & Alternator Bracket Installation Figures 2 & 3 8. Alternator Assembly Installation & Power Steering Pump Bracket Installation (Cont.) Figures 4 & 5 9. Power Steering Pump Assembly Installation Figures 6 & 710. Power Steering Pump Pulley Installation & Belt Routing Figures 8 & 911. Packing List

3908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 3 OF 11

TM

Bracket Systems

-

Packing List:Small Block Chevrolet Short Pump Mid-mount

Alternator/Power Steering Bracket Kit (148000)No. Qty. Part No. Description

1.2.3.4.5.6.

** Before beginning installation, open all packages and check contents of shipment. Please report any shortages directly to Vintage Air within 15 days. After 15 days, Vintage Air will not be responsible for missing or damaged items.

211111

14641614602714611-SCR146026146415191028

Small Block Chevy Short Pump Power Steering Pump Mounting BracketSmall Block Chevy Short Pump Front Mid-mount Alternator BracketAlternator Adjuster BracketSmall Block Chevy Short Pump Driver Side Mid-mount Alternator Side Mounting BracketSmall Block Chevy Short Pump Power Steering Pump BracketSmall Block Chevy Short Pump Mid-mount Alternator/Power Steering Hardware Kit

1

3

5 6

4

2

4908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 4 OF 11

TM

Bracket Systems

-

NOTE: Refer to dimensional references provided before installing bracket assembly onto engine.Brackets must be installed to the specified measurements, or the alternator/power steering bracket kitwill not function correctly.

Dimensional References

2.515” ±.063

2.688”±.031

3.840”

3.048” ±.063

Machined Surface on Frontof Engine Block to InsideSurface of AlternatorBracket

Machined Surface onFront of Engine Blockto Inside Surface ofPower Steering PumpMounting Bracket

Surface of Blockto 2nd GrooveCenterline ofCrankshaft Pulley(GM OEM Specification)

AlternatorSide Mounting

Bracket146026

Power Steering PumpMounting Bracket

146416

Rear Viewof

EngineDriver Side

AlternatorBracket146027

WaterPump Boss

Cylinder Head

Machined Surface on Exhaust Ports ofCylinder Head to Inside Surface ofAlternator Side Mounting Bracket

Side Viewof

EngineDriver Side

Side Viewof

EngineDriver Side

Top Viewof

EngineDriver Side

NOTE: To determine steelspacer length(s), subtractwater pump boss heightfrom total length (3.048).(E.G. 3.048 - .923 Boss Height Length 2.125 = Steel Spacer Length Required)

NOTE: This kit was designedto the GM OEM specificationlisted below. If your vehicledoes not conform to OEMspecifications, adjustaccordingly to avoidmisalignment of pulleys.

5908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 5 OF 11

TM

Bracket Systems

-NOTE: Before tightening bolts, assemble all brackets loosely toengine. This will ensure proper alignment of all brackets.

Install alternator side mounting bracket onto cylinder head using ONLY steel spacers required for applicationsshown below or on Page 6.NOTE: For applications not listed below or on Page 6, custom length spacers may be substituted aslong as dimensional guidelines are followed.

1.

3/8-16 x 3 ¼”Hex Bolt

(2) 2.125” LSteel Spacers

Alternator Side Mounting Bracket Installation

Alternator SideMounting Bracket

146026

3/8” FlangedHeader

1. Remove the driver side water pump mounting bolts (discard) as shown in Figure 1, below.

2. Remove the 1st and 3rd driver side manifold bolts (discard) as shown in Figure 1, below.

3. Remove the lower driver side accessory mounting bolts (discard) as shown in Figure 1, below.

OEM Bolt Removal

Figure 1

Remove ManifoldBolts

Remove AccessoryBolts

Remove Water PumpMounting Bolts

6908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 6 OF 11

TM

Bracket Systems

-

Alternator Side MountingBracket Installation (Cont.)

Remove pulley from power steering pump and install power steering pump bracket onto pump as shownbelow.

1.

Power Steering Pump Bracket Installation

Top Engine ViewDriver Side

1/4” FlangedHeader

(2) 2.125” LSteel Spacers

(2) .125” LSteel Spacers

Top Engine ViewDriver Side

Alternator AssemblyBracket146026

Ram HornManifold

.250” LSteel Spacer

Remove Pulley

3/8-16 x 1”Hex Bolt

Power SteeringPump Bracket

146415

(2) .188 LSteel Spacers

1.000” LSteel Spacer

Alternator AssemblyBracket146026

Top Engine ViewDriver Side

Alternator AssemblyBracket146026

Drop TypeManifold

(2) 1.000” LSteel Spacers

NOTE: To determine steelspacer length(s), subtract1/4” flanged header heightfrom total length (2.515).(E.G. 2.515 Total Length - .250 Flanged Header Length 2.265 = Steel Spacer ± .063 Length Required)This measurement may vary withgasket thickness.

7908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 7 OF 11

TM

Bracket Systems

-

Figure 3

Install alternator adjuster bracket onto alternator using a 5/16-18 x 1” hex bolt as shown in Figure 2, below.1.

Alternator5/16-18 x 1”

Hex Bolt

Alternator AdjusterBracket

14611-SCR

(2) 3/8” x 3 ¼”Hex Bolts

Alternator Bracket146027

(2) 1.875 LSteel Spacers

AlternatorAdjuster Bracket Installation

Figure 2

Install alternator bracket onto water pump ear as shown in Figure 3, below.

NOTE: Water pump boss height may vary andrequire adjustment of steel spacer length. SeePage 4 for details.

1.

Alternator Bracket Installation

*(4) .125 LSteel Spacers(Use Only ifNecessary)

8908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 8 OF 11

TM

Bracket Systems

-

Figure 5

3/8” Locknut

Alternator Assembly

.625” LSteel Spacer

3/8-16 x 4”Hex Bolt

3/8” x 3/4”Hex Bolt

*3/8” x 3/4”Hex Bolt

3/8” LockWasher

Front View Rear View

*.188” LSteel Spacer

*NOTE: For Use onPower Steering PumpsWithout 3/8” StudContaining IncorporatedStand-off)

Power Steering PumpMounting Bracket

146416

Power Steering PumpMounting Bracket

146416

Power Steering PumpAssembly

Install alternator assembly using a 3/8-16 x 4” hex bolt, a .625” length steel spacer and a 3/8” locknut asshown in Figure 4, below.NOTE: Alternator assembly is installed behind the alternator bracket and in front of the alternatorassembly bracket. Steel spacer is inserted between the alternator and alternator assembly bracket.

1.

Install (2) power steering pump mounting brackets onto power steering pump assembly as shown in Figure 5,below.

1.

Alternator Assembly Installation

Power Steering PumpBracket Installation (Cont.)

Figure 4

Alternator AssemblyBracket146026

Alternator Bracket146027

9908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 9 OF 11

TM

Bracket Systems

-

Figure 6

Figure 7

Install power steering pump assembly using the accessory mounting holes located on the lower driver side ofthe engine as shown in Figure 6, below.Install a 3/8-16 x 1 ½” hex bolt and 3/8” flat washer through the back slot of the alternator adjuster bracket,alternator bracket and power steering pump bracket. Secure bolt with a 3/8” flat washer, a 3/8” lock washerand a 3/8” locknut as shown in Figure 7, below.

1.

2.

Power SteeringPump Assembly Installation

(2) 3/8-16 x 3 ½”Hex Bolts

3/8-16 x 1 ½”Hex Bolt

3/8” FlatWasher

3/8” FlatWasher

3/8” LockWasher

3/8” Locknut

(2) 2.430” LSteel Spacers

Power SteeringPump

Power SteeringPump Bracket

Alternator Adjuster

Alternator Bracket

10908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 10 OF 11

TM

Bracket Systems

-

Figure 9

Figure 8

Route belts as shown in Figure 9, below. Vintage Air recommends using only Dayco, Gates or Goodyear brandreinforced V-belts with this alternator/power steering kit. Any use of lesser-quality belts may cause improperperformance. Alternator belt length of 57” is recommended. Power steering belt length of 37 ½” to 38” isrecommended. NOTE: This can vary with diameter of your water pump and crankshaft pulleys.

1.

Belt Routing

Alternator

Power SteeringPump

Power SteeringPump Pulley

Power SteeringPump

Crankshaft Pulley Grooves:

Water Pump

Crankshaft

Front

1. Crankshaft and Power Steering Pump2. Crankshaft, Water Pump, Alternator and Power Steering Pump3. Crankshaft, Compressor and Water Pump (If Applicable)

1 2 3

Install power steering pump pulley onto the power steering pump as shown in Figure 8, below.1.

Power Steering PumpPulley Installation

908000 REV B 04/19/13 INST. SBC SP MID-MOUNT ALT/PS BRKT KIT PG 11 OF 11

TM

Bracket Systems

-

Checked By:Packed By:

Date:

Packing List:Small Block Chevrolet Short Pump Mid-Mount

Alternator/Power Steering Bracket Kit (148000)No. Qty. Part No. Description

1.2.3.4.

5.6.

2111

11

14641614602714611-SCR146026

146415191028

Small Block Chevy Short Pump Power Steering Pump Mounting BracketSmall Block Chevy Short Pump Front Mid-mount Alternator BracketAlternator Adjuster BracketSmall Block Chevy Short Pump Driver Side Mid-mount Alternator SideMounting BracketSmall Block Chevy Short Pump Power Steering Pump BracketSmall Block Chevy Short Pump Mid-mount Alternator/Power Steering Hardware Kit

1

3

5 6

4

2