SUBMITTED BY- MAHESH S KARAYAT

KHARAK S KUNWAR KAMAL TIWARI

ASTAM .S. JAGERA

The function of a governor is to regulate the mean speed of an engine, when there are variation in the load.

when the load on an engine’s increase, its speed decreases, therefore it becomes necessary to increase the supply of working fluid. on the engine loaded increases, its speed increases and thus less working fluid is required.

The governor automatically controls the supply of working fluid to the engine with the varying load conditions and keep the mean speed within certain limits.

Automatic Governor is a mechanical electronics device and its used to control the fuel with variation of load as a governor.

In this technique we are implemented the PLC those wire will attached with the fuel pump and also second wire will attached with the engine and it will give a massage to the PLC.

When the PLC receives a massage from the crank rotation and forward the output to the FI Pump. FI pump maintain the fuel as per requirement and also can save the unwanted fuel.

When the load is applied on vehicle its also effected in an engine so the input is given by the engine through a PLC device those are attached with an engine.

The output will shows in fuel indicator .through this indication the F.I pump manage the fuel at a different stages. The help of the PLC.

it will work as a sensor which measures the fuel capacity As the load.

1.PROGRAMMABLE LOGIC CONTROLLE

A PROGRAMMABLE LOGIC CONTROLLER (PLC) is an industrial computer control system that continuously monitors the state of input devices and makes decisions based upon a custom program to control the state of output devices.

Almost any production line, machine function, or process can be greatly enhanced using this type of control system. However, the biggest benefit in using a PLC is the ability to change and replicate the operation or process while collecting and communicating vital information.

Programming of  PLC is simple to learn. It’s not much complicated.

 The controllers eliminated the need for rewiring and adding additional hardware for each new configuration of logic.

Automatic governors are also more cost-effective in the long haul.

Automatic governor are more reliable and more efficient,The accuracy of the device also plays a pivotal role.

A solenoid valve is an electro-mechanically operated valve, The valve is controlled by an electric current through.

 solenoid in the case of a two-port valve the flow is switched on or off, in the case of a three-port valve, the outflow is switched between the two outlet ports.

Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.

SMPS

24 V dc motor is used . 12 V by the diode , transistor and

resistance.

Automatic governor are more reliable and more efficient . The accuracy of the device also plays a pivotal role

The electronic governor is also very versatile both in terms of design and use. It reduces the installation time, and it also delivers faster working.

Automatic governor is maintenance free, because there are no moving parts that may break or wear.

THANK YOU