smartplant review for dummies
Embed Size (px)
TRANSCRIPT
-
7/25/2019 SmartPlant Review for dummies
1/590
SmartPlant ReviewUser's Guide
Version 2010 - UPDATED
May 2011
DVIS2-PE-200001I
-
7/25/2019 SmartPlant Review for dummies
2/590
Copyright
Copyright 1999 - 2011 Intergraph Corporation. All Rights Reserved.
Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement;contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, tradesecret law, and international treaty, and may not be provided or otherwise made available without proper authorization fromIntergraph Corporation.
U.S. Government Restricted Rights Legend
Use, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This wasdeveloped at private expense and is "restricted computer software" submitted with restricted rights in accordance withsubparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the Federal
Acquisition Regulations ("FAR") and its successors, and is unpublished and all rights are reserved under the copyright laws ofthe United States. For units of the Department of Defense ("DoD"): This is "commercial computer software" as defined at DFARS252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3.
Unpublished - rights reserved under the copyright laws of the United States.
Intergraph CorporationP.O. Box 240000Huntsville, AL 35813
Terms of Use
Use of this software product is subject to the End User License Agreement ("EULA") delivered with this software product unlessthe licensee has a valid signed license for this software product with Intergraph Corporation. If the licensee has a valid signedlicense for this software product with Intergraph Corporation, the valid signed license shall take precedence and govern the use
of this software product. Subject to the terms contained within the applicable license agreement, Intergraph Corporation giveslicensee permission to print a reasonable number of copies of the documentation as defined in the applicable license agreementand delivered with the software product for licensee's internal, non-commercial use. The documentation may not be printed forresale or redistribution.
Warranties and Liabilities
All warranties given by Intergraph Corporation about equipment or software are set forth in the EULA provided with the softwareor applicable license for the software product signed by Intergraph Corporation, and nothing stated in, or implied by, thisdocument or its contents shall be considered or deemed a modification or amendment of such warranties. Intergraph believesthe information in this publication is accurate as of its publication date.
The information and the software discussed in this document are subject to change without notice and are subject to applicabletechnical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document.
The software discussed in this document is furnished under a license and may be used or copied only in accordance with theterms of this license. No responsibility is assumed by Intergraph for the use or reliability of software on equipment that is notsupplied by Intergraph or its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINALEVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT.
Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data.Users should verify for themselves that the data is accurate and suitable for their project work.
TrademarksIntergraph, the Intergraph logo, PDS, SmartPlant, FrameWorks, I-Convert, I-Export, I-Sketch, IntelliShip, INtools, ISOGEN,MARIAN, SmartSketch, SPOOLGEN, SupportManager, and SupportModeler are trademarks or registered trademarks ofIntergraph Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are registeredtrademarks of Microsoft Corporation. MicroStation is a registered trademark of Bentley Systems, Inc. Other brands and productnames are trademarks of their respective owners.
-
7/25/2019 SmartPlant Review for dummies
3/590
SmartPlant Review User's Guide 3
ContentsPreface ........................................................................................................................................................ 17
What's New in SmartPlant Review? ......................................................................................................... 19
Welcome to SmartPlant Review ............................................................................................................... 23
Using SmartPlant Review Modules ......................................................................................................... 25
API Module ............................................................................................................................................ 25Collaboration Module ............................................................................................................................ 26Construction Module ............................................................................................................................. 27
On-Site Drawing Generation Module .................................................................................................... 28Photo-Realism Module .......................................................................................................................... 29Point Cloud Integrator Module .............................................................................................................. 29Simulation and Visual Effects Module .................................................................................................. 30
Introducing the SmartPlant Review Interface ......................................................................................... 31
Commonly-Used Commands ................................................................................................................ 31
Close Command ............................................................................................................................. 31Save Command .............................................................................................................................. 31Undo Command ............................................................................................................................. 31Redo Command ............................................................................................................................. 32Cut Command ................................................................................................................................ 32Copy Command .............................................................................................................................. 32Paste Command ............................................................................................................................. 32Next Object Command ................................................................................................................... 32Previous Object Command ............................................................................................................ 32
Menu Bar Command ...................................................................................................................... 33
Status Bar Command ..................................................................................................................... 33
Refresh Data Command ................................................................................................................. 33Format Readouts Command .......................................................................................................... 33Recently Used Files Command ...................................................................................................... 33Exit Command ................................................................................................................................ 34
Display Commands ............................................................................................................................... 34Annotations Command ................................................................................................................... 34Activate Command ......................................................................................................................... 34XYZ Label Command ..................................................................................................................... 35Dashed View Cone Command ....................................................................................................... 35Display Order Command ................................................................................................................ 35Dot Box Command ......................................................................................................................... 35Shaded Command .......................................................................................................................... 36
Large Plant Monument Command ................................................................................................. 36
Measurements Command .............................................................................................................. 36Object Textures Command ............................................................................................................ 36Outline Toggle ................................................................................................................................ 37Perspective Command ................................................................................................................... 38Perspective Angle Command ......................................................................................................... 38Shaded with Outline Command ...................................................................................................... 38
-
7/25/2019 SmartPlant Review for dummies
4/590
Contents
4 SmartPlant Review User's Guide
Shaded/Wireframe Toggle ............................................................................................................. 39Show/Hide for Main View Command .............................................................................................. 40Show/Hide for Plan View Command .............................................................................................. 40Show/Hide for Elevation View Command....................................................................................... 40Stroking Tolerance Command ........................................................................................................ 40
Surface Encircle Command ............................................................................................................ 41
Wireframe with Outline Command ................................................................................................. 41
Wireframe Command ..................................................................................................................... 42Wireframe Background Color Command ....................................................................................... 43
Common Views Commands ................................................................................................................. 43Common Views Control .................................................................................................................. 43Looking Plan (Top) Command ....................................................................................................... 45Looking North (Front) Command .................................................................................................... 45Looking West (Right) Command .................................................................................................... 45Looking Up (Bottom) Command ..................................................................................................... 45
Looking South (Back) Command ................................................................................................... 45
Looking East (Left) Command ........................................................................................................ 45
Isometric (Top Front Right) Command ........................................................................................... 45Isometric (Top Front Left) Command ............................................................................................. 46
Isometric (Top Back Right) Command ........................................................................................... 46Isometric (Top Back Left) Command .............................................................................................. 46
Isometric (Bottom Front Right) Command...................................................................................... 46Isometric (Bottom Front Left) Command ........................................................................................ 46Isometric (Bottom Back Right) Command ...................................................................................... 46Isometric (Bottom Back Left) Command ........................................................................................ 46Rotate with Model Fit Command .................................................................................................... 47
Commands for Arranging the View ....................................................................................................... 47Arrange All Command .................................................................................................................... 47
Arrange Icons Command................................................................................................................ 48Cascade Command ........................................................................................................................ 48Elevation Command ....................................................................................................................... 48Four View Layout Command .......................................................................................................... 48Full Screen Command .................................................................................................................... 48Main Command .............................................................................................................................. 49
Plan Command ............................................................................................................................... 49Refresh Command ......................................................................................................................... 49Refresh All Views ........................................................................................................................... 49
Restore All Command .................................................................................................................... 49Scroll Bars Command ..................................................................................................................... 49Single View Layout Command ....................................................................................................... 50Text Command ............................................................................................................................... 50Three View Layout Command ........................................................................................................ 50Tile Horizontally Command ............................................................................................................ 50Tile Vertically Command................................................................................................................. 50
Toolbars ................................................................................................................................................ 51Annotation Toolbar ......................................................................................................................... 51
Common Toolbar ............................................................................................................................ 52
Common View Tools Toolbar ......................................................................................................... 53Encircle Radius Toolbar ................................................................................................................. 55
Measure Toolbar ............................................................................................................................ 55
Motion Toolbar ................................................................................................................................ 56Navigation Toolbar ......................................................................................................................... 57Perspective Angle Toolbar ............................................................................................................. 58
-
7/25/2019 SmartPlant Review for dummies
5/590
Contents
SmartPlant Review User's Guide 5
Photo-Realism Toolbar ................................................................................................................... 58Position Control Toolbar ................................................................................................................. 59ScheduleReview Toolbar ............................................................................................................... 61Standard Toolbar ............................................................................................................................ 62Tags Toolbar .................................................................................................................................. 62
Tools Toolbar .................................................................................................................................. 63
Tools MiniBar .................................................................................................................................. 63
Views Toolbar ................................................................................................................................. 64Window Toolbar .............................................................................................................................. 65Customize Toolbars ........................................................................................................................ 65
Understanding Projects and Project Databases .................................................................................... 71
Change Label Database Format ........................................................................................................... 74
Share the Project Database Over the Network ..................................................................................... 74
Performance Control ................................................................................................................................. 77
Opening a Model ........................................................................................................................................ 81
Open a Model File ................................................................................................................................. 82Create Project Dialog Box .............................................................................................................. 83
Open Model from Command Line ......................................................................................................... 88Use the Search Path ............................................................................................................................. 89Adjust Index Allocation for Large Datasets ........................................................................................... 91
Setting the Home View .............................................................................................................................. 91
Using 3D Navigation .................................................................................................................................. 93
3D Navigation Controls ......................................................................................................................... 93Use Keyboard-Only 3D Navigation ....................................................................................................... 95
Use Mouse Only or Mouse + Keyboard Combinations (Fly Mode) ...................................................... 96
Use the 3D Navigator ............................................................................................................................ 99
Return to Default View.................................................................................................................. 100
Create a Custom Home View ....................................................................................................... 100Enter Fly Mode ............................................................................................................................. 101Look Around ................................................................................................................................. 101Move ............................................................................................................................................. 101Select an Object ........................................................................................................................... 102Fit to Object(s) .............................................................................................................................. 102
3D Navigation Tips .............................................................................................................................. 103
Classic SmartPlant Review Navigation ................................................................................................. 105
Configure Motion Settings ................................................................................................................... 106Motion Settings Dialog Box .......................................................................................................... 108
Set Motion Rates .......................................................................................................................... 114
Set Single Step Motion ................................................................................................................. 115
Set Toggle Step Direction ............................................................................................................ 115Set Continuous Motion ................................................................................................................. 115Set Display Options ...................................................................................................................... 116
Set Bearing Angles ....................................................................................................................... 116Use Mouse Drag Modes ..................................................................................................................... 116
Use Auto-Highlighting to Display Label Data ............................................................................... 118
-
7/25/2019 SmartPlant Review for dummies
6/590
Contents
6 SmartPlant Review User's Guide
Move View Cone Forward/Back, Left/Right.................................................................................. 121Pan ............................................................................................................................................... 122Rotate ........................................................................................................................................... 122Manipulate the View Cube ........................................................................................................... 123Set Priority Mode .......................................................................................................................... 123
Set Center Mode .......................................................................................................................... 123
Lock Center Point ......................................................................................................................... 124
Lock Elevation .............................................................................................................................. 124Use the Joystick .................................................................................................................................. 124
Activate a Joystick in SmartPlant Review .................................................................................... 125Map Joystick Commands ............................................................................................................. 125
Use the Keyboard ............................................................................................................................... 126Shortcut Function Keys ................................................................................................................ 126Standard Control Keys ................................................................................................................. 127SmartPlant Review Shortcut Keys ............................................................................................... 128
Keypad Keys (Classic Navigation) ............................................................................................... 130
Set Motion Control to Eye Point .......................................................................................................... 132
Set Motion Control to Display Set ....................................................................................................... 132Move Continuously ............................................................................................................................. 132
Move Single Step ................................................................................................................................ 133Set Step Direction ............................................................................................................................... 133
Control Movement with Positioning Modes ......................................................................................... 134Move Lateral ................................................................................................................................. 134Set Horizontal Encircle ................................................................................................................. 135Set Vertical Encircle ..................................................................................................................... 136Clip to Encircle Sphere ................................................................................................................. 136
Set Surface Encircle ..................................................................................................................... 137Control Movement with Directional Modes ......................................................................................... 138
Set View Dependent Mode ........................................................................................................... 138Set View Dependent, Level Mode ................................................................................................ 139Set View Independent Mode ........................................................................................................ 139Set Plant North Mode ................................................................................................................... 140
Introducing the Project Manager ........................................................................................................... 141
Display or Hide Project Manager ........................................................................................................ 142
View Items in the Model with Project Manager ................................................................................... 142 Display or Hide Parts of a Model with Project Manager ..................................................................... 143Move the Project Manager (Dock and Undock) .................................................................................. 143Enable or Disable Immediate Update Mode ....................................................................................... 144
Working with VUE Files .......................................................................................................................... 145
Add VUE Files ..................................................................................................................................... 146Load VUE Files ................................................................................................................................... 147Save As VUE File................................................................................................................................ 149
Move, Rotate, and Scale a Model: VUE File Position......................................................................... 151
Viewing SmartPlant 3D Model Data ....................................................................................................... 159
Use the SmartPlant 3D Label Selector Utility ..................................................................................... 161View SmartPlant 3D Labels in SmartPlant Review ............................................................................. 167Map a Label Using the RelationshipMapping.txt File.......................................................................... 169View General Notes from SmartPlant 3D ........................................................................................... 171
-
7/25/2019 SmartPlant Review for dummies
7/590
Contents
SmartPlant Review User's Guide 7
Review Example Workflow ................................................................................................................. 175Troubleshoot Label Display Problems ................................................................................................ 179
Work with Aspects .................................................................................................................................. 182
Turn Aspects On and Off .................................................................................................................... 183
Add Custom Aspects .......................................................................................................................... 184
Using the UoM Converter to Change the Units of Measure for Labels .............................................. 187
Create the Units of Measure Conversion File for SmartPlant 3D Projects ......................................... 189
Load the SmartPlant 3D Units of Measure Conversion File ............................................................... 190
Find Objects in the Model ....................................................................................................................... 193
Find Object Dialog Box ....................................................................................................................... 194
Working with Views ................................................................................................................................. 197
Use the Common Views Control ......................................................................................................... 199
Fit Views .............................................................................................................................................. 200
Fit All to Model .............................................................................................................................. 200
Fit View to Model .......................................................................................................................... 201Fit View to Object ......................................................................................................................... 201Fit View to Volume ........................................................................................................................ 202Fit View to Display Set.................................................................................................................. 202Zoom In ........................................................................................................................................ 203Zoom Out ...................................................................................................................................... 203
Zoom About a Point ...................................................................................................................... 204Set Zoom Amount ......................................................................................................................... 204
Light Views .......................................................................................................................................... 204
Set Light Direction ........................................................................................................................ 205Set Ambient Light Level................................................................................................................ 205Set Brightness Level ..................................................................................................................... 206
Configure View Settings ...................................................................................................................... 207Define Display Order .................................................................................................................... 207
Maintain Display Options .............................................................................................................. 208Maintain Render Settings ............................................................................................................. 208Set Background Color .................................................................................................................. 208Set Display Tag ............................................................................................................................ 208
Set Lighting Intensity .................................................................................................................... 209
Set Range Reject ......................................................................................................................... 209
Set Stroking Tolerance ................................................................................................................. 209
Set Sun Bearing Angles ............................................................................................................... 210Set Textures ................................................................................................................................. 210Set View Cone Perspective .......................................................................................................... 210View Settings Dialog Box ............................................................................................................. 211Colors Dialog Box ......................................................................................................................... 219
Select Level Settings .......................................................................................................................... 219
View Current Level Settings ......................................................................................................... 220Edit Levels .................................................................................................................................... 220Match Files ................................................................................................................................... 220
Level Settings Dialog Box ............................................................................................................ 221
Match Items Dialog Box................................................................................................................ 222Resolve Current Level Settings Dialog Box ................................................................................. 223
-
7/25/2019 SmartPlant Review for dummies
8/590
Contents
8 SmartPlant Review User's Guide
Hide Levels ......................................................................................................................................... 223Hide Level Dialog Box .................................................................................................................. 224
View in Stereo ..................................................................................................................................... 224Activate Stereo ............................................................................................................................. 225Set Stereo Settings ....................................................................................................................... 225
Display Left Stereo View .............................................................................................................. 226
Display Right Stereo View ............................................................................................................ 226
Set Stereo Distances .................................................................................................................... 226
Using the View Cone ............................................................................................................................... 229
Set Eye Point ...................................................................................................................................... 230Place Eye Point Only .......................................................................................................................... 231
Set View by Eye Point ......................................................................................................................... 231
Set Center Point .................................................................................................................................. 232
Place Center Point Only ...................................................................................................................... 232View by Center Point .......................................................................................................................... 233Set Clipping Planes ............................................................................................................................. 233Place Near Clipping Plane .................................................................................................................. 234Place Far Clipping Plane .................................................................................................................... 234
Applying Range Rejection ...................................................................................................................... 235
Activate Range Rejection .................................................................................................................... 235Set All Range Rejection ...................................................................................................................... 236
Set All Range Rejection Values Dialog Box ................................................................................. 236 Set Main Range Rejection .................................................................................................................. 237Set Plan Range Rejection ................................................................................................................... 237Set Elevation Range Rejection ........................................................................................................... 237Show Range Rejection Settings ......................................................................................................... 237
Working with Display Sets...................................................................................................................... 239
View Display Sets ............................................................................................................................... 241
Create New Display Set Definitions .................................................................................................... 242
Create a Display Set Definition from a SmartPlant 3D System Hierarchy ......................................... 243Create a Nozzle Display Set Definition ............................................................................................... 243Create a New Display Set Folder ........................................................................................................ 244Auto-Define Display Sets .................................................................................................................... 245
Auto-Define Display Sets Dialog Box ........................................................................................... 246Edit Display Sets ................................................................................................................................. 246
Edit a Display Set Definition ......................................................................................................... 247Edit a Display Set Position ........................................................................................................... 259
Assign Material to Display Sets .......................................................................................................... 266
Assign Material to Display Set Dialog Box ................................................................................... 267
Display Materials ................................................................................................................................. 268Show Display Sets .............................................................................................................................. 269
Show Display Set Membership ........................................................................................................... 269Shade Display Sets ............................................................................................................................. 269
Dim Display Sets ................................................................................................................................. 270Reverse Dim Display Sets .................................................................................................................. 270Show Only Selected Display Sets....................................................................................................... 270Hide Only Selected Display Sets ........................................................................................................ 271Move Display Sets .............................................................................................................................. 271
-
7/25/2019 SmartPlant Review for dummies
9/590
Contents
SmartPlant Review User's Guide 9
Delete Display Sets ............................................................................................................................. 272Rename Display Sets ......................................................................................................................... 272Import Display Sets ............................................................................................................................. 272
Import Display Sets Dialog Box .................................................................................................... 273Export Display Sets ............................................................................................................................. 274
Export Display Sets Dialog Box .................................................................................................... 275
Placing 3D Points .................................................................................................................................... 277
Define a Bore Sight ............................................................................................................................. 277Snap to an Object ............................................................................................................................... 277
Placing Measurements ............................................................................................................................ 279
Set Snaplock Measurement ................................................................................................................ 280Set Surface Measurement .................................................................................................................. 281Measure Shortest Distance between Objects ..................................................................................... 282Use One Click Measurement Mode .................................................................................................... 282Move Measurement ............................................................................................................................ 283Restore Measurement Position ........................................................................................................... 283
Delete Last Measurement ................................................................................................................... 284Delete All Measurements .................................................................................................................... 284
Creating Measurement Collections ....................................................................................................... 285
Create New Measurement Collection ................................................................................................. 286Edit Measurement Collections ............................................................................................................ 286
Measurement Collections Dialog Box .......................................................................................... 287Delete All Measurement Collections ................................................................................................... 296Delete Active Collection Measurements ............................................................................................. 297
Communicating with Tags ...................................................................................................................... 299
Place a Tag With a Leader Line.......................................................................................................... 300
Place Tag With No Leader .................................................................................................................. 301Edit Tags ............................................................................................................................................. 302
Edit Tags Dialog Box .................................................................................................................... 302Delete Tags ......................................................................................................................................... 306
Delete Tag Dialog Box.................................................................................................................. 306Find Tags ............................................................................................................................................ 306
Find Tags Dialog Box ................................................................................................................... 307
View Find Tags Results ...................................................................................................................... 309
View Next Tag ..................................................................................................................................... 309
View Previous Tag .............................................................................................................................. 310Go to Tag ............................................................................................................................................ 310
Go to Tag Dialog Box ................................................................................................................... 311Activate Tag Display ........................................................................................................................... 311Display Only Active Tag ...................................................................................................................... 312Display All Tags .................................................................................................................................. 312
Turn Off Tag Display ........................................................................................................................... 312Display Tag Action Comments ............................................................................................................ 313Import Tags ......................................................................................................................................... 313
Import Tags with Attributes and Symbology ....................................................................................... 314
Export Tags ......................................................................................................................................... 315
-
7/25/2019 SmartPlant Review for dummies
10/590
Contents
10 SmartPlant Review User's Guide
Placing Data Annotations ....................................................................................................................... 317
Create a Data Annotation ................................................................................................................... 317Edit a Data Annotation ........................................................................................................................ 318
Data Annotation Properties Dialog Box ........................................................................................ 318Edit a Data Annotation Position .......................................................................................................... 321
Display Data Annotations .................................................................................................................... 321
Delete One Data Annotation ............................................................................................................... 322
Delete All Data Annotations ................................................................................................................ 322
Placing Volume Annotations .................................................................................................................. 323
Display Volume Annotations ............................................................................................................... 325Place a Volume Annotation ................................................................................................................. 325Create a New Volume Annotation Category ....................................................................................... 327Find a Volume Annotation ................................................................................................................... 327Inactivate a Volume Annotation Category .......................................................................................... 327
Edit Volume Annotations ..................................................................................................................... 328Edit Volume Annotations Dialog Box............................................................................................ 328
Adjust a Volume Annotation ................................................................................................................ 333
Delete a Single Volume Annotation .................................................................................................... 336Delete All Volume Annotations ........................................................................................................... 337
Import Volume Annotations ................................................................................................................. 337Import Volume Annotations Dialog Box ........................................................................................ 338
Export Volume Annotations ................................................................................................................ 338Export Volume Annotations Dialog Box ....................................................................................... 339
Working with Clipping Volumes ............................................................................................................ 339
Activate/Deactivate Clipping Volume .................................................................................................. 340Use Clipping Volume (3D Wireframe Box) ......................................................................................... 342
Set a Clipping Volume .................................................................................................................. 345Turn Off Volume Clipping ............................................................................................................. 346
Use Classic Clipping Volume .............................................................................................................. 347
Attaching External Data .......................................................................................................................... 349
Open an External Database ................................................................................................................ 352Edit Attachments ................................................................................................................................. 352
Edit Attachments Dialog Box ........................................................................................................ 354Edit Filename / Argument Dialog Box .......................................................................................... 355
Edit Types ........................................................................................................................................... 356Edit Types Dialog Box .................................................................................................................. 358
Working with Materials ........................................................................................................................... 361
Assign Materials .................................................................................................................................. 362Assign Materials to Elements Dialog Box..................................................................................... 363
Unassign Materials ............................................................................................................................. 365Unassign Materials Dialog Box .................................................................................................... 366
Edit Materials ...................................................................................................................................... 367Edit Materials Dialog Box ............................................................................................................. 368Adjust Pattern Dialog Box ............................................................................................................ 371Adjust Bump Map Dialog Box ....................................................................................................... 372
Create Materials .................................................................................................................................. 373
-
7/25/2019 SmartPlant Review for dummies
11/590
Contents
SmartPlant Review User's Guide 11
Create Materials Dialog Box ......................................................................................................... 374Define Search Path for Material Files ................................................................................................. 375Edit a Search Path .............................................................................................................................. 375
Search Path Dialog Box ............................................................................................................... 376
Making Animations .................................................................................................................................. 377
Save and Recall Views Dialog Box ..................................................................................................... 378Copy Selected View Dialog Box ................................................................................................... 380Create Group Dialog Box ............................................................................................................. 382Modify Frame Numbers Dialog Box ............................................................................................. 382Move Selected Views Dialog Box ................................................................................................. 383Rename Group Dialog Box .......................................................................................................... 384
Set Up Partial View Recall Dialog Box ......................................................................................... 384
Add Current/Edit View Dialog Box ...................................................................................................... 385
Description Tab (Add Current/Edit View Dialog Box) ................................................................... 385Display Tab (Add Current/Edit View Dialog Box) ......................................................................... 386Outline Tab (Add Current/Edit View Dialog Box) ......................................................................... 387View Cone Tab (Add Current/Edit View Dialog Box) ................................................................... 387Lighting Tab (Add Current/Edit View Dialog Box) ........................................................................ 389Advanced Tab (Add Current/Edit View Dialog Box) ..................................................................... 390
Save and Recall Views ....................................................................................................................... 391Save the Current View.................................................................................................................. 392Recall a Saved View ..................................................................................................................... 393
Recall a Partial View ..................................................................................................................... 393
Set Up Partial View Recall ........................................................................................................... 395Copy a Saved View ...................................................................................................................... 396Edit a Saved View ........................................................................................................................ 396Move a Saved View ...................................................................................................................... 397Create a View Group .................................................................................................................... 397Rename a View Group ................................................................................................................. 397Delete a View Group .................................................................................................................... 398Modify Frame Numbers ................................................................................................................ 398
Import Saved Views ............................................................................................................................ 398
Import Saved Views Dialog Box ................................................................................................... 400Export Saved Views ............................................................................................................................ 401
Export Saved Views Dialog Box ................................................................................................... 402Take a Snapshot ................................................................................................................................. 403
Snapshot View Dialog Box ........................................................................................................... 404Send a Snapshot to SmartSketch ................................................................................................ 406Calculate a High Resolution Snapshot ......................................................................................... 406
Set Key Frame Motion ........................................................................................................................ 407Display Key Frame ....................................................................................................................... 409Play Key Frame Motion ................................................................................................................ 410Pause Key Frame Motion ............................................................................................................. 410Stop Key Frame Motion ................................................................................................................ 411
Snapshot Key Frame .................................................................................................................... 411Set Up Partial Key Frame Recall .................................................................................................. 413
Using SmartPlant Review in Streaming Mode ...................................................................................... 417
View Multiple VUE Files in a Single Session ...................................................................................... 423Display Streaming Data in the Properties Window ............................................................................. 424
-
7/25/2019 SmartPlant Review for dummies
12/590
Contents
12 SmartPlant Review User's Guide
Working in an Integrated Environment ................................................................................................. 427
Configuring SmartPlant Review for Integration ................................................................................... 428Using SmartPlant Review in an Integrated Environment .................................................................... 428
Exporting Data in PDF Format ............................................................................................................... 431
Install the 3D PDF Utility ..................................................................................................................... 432
Export to PDF ...................................................................................................................................... 433View Generated PDF File ................................................................................................................... 433
Printing ..................................................................................................................................................... 435
Change Page Setup ............................................................................................................................ 435
Page Setup Dialog Box ................................................................................................................ 436Generate Print Preview ....................................................................................................................... 437
Print Preview Dialog Box .............................................................................................................. 438Print Views .......................................................................................................................................... 439
Print Dialog Box ............................................................................................................................ 440
Using Accessories .................................................................................................................................. 443
Load Accessories ................................................................................................................................ 444Modify the Accessories Menu ............................................................................................................. 444
Start Programs Automatically ............................................................................................................. 446View Point Cloud Data ........................................................................................................................ 446Edit Images ......................................................................................................................................... 447Manipulate Text Annotations .............................................................................................................. 447
Place Annotation Dialog Box ........................................................................................................ 449Place One Text Annotation .......................................................................................................... 450Place Many Text Annotations ....................................................................................................... 450Move One Text Annotation ........................................................................................................... 451Move Many Text Annotations ....................................................................................................... 451Edit One Text Annotation ............................................................................................................. 452
Edit Many Text Annotations ......................................................................................................... 452Delete One Text Annotation ......................................................................................................... 452
Delete Many Text Annotations ..................................................................................................... 453Delete All Text Annotations .......................................................................................................... 453Display Text Annotations .............................................................................................................. 453Turn Off Text Annotation Display ................................................................................................. 454
Create Display Set Movement ............................................................................................................ 454Enable Collision Detection Using the Move Display Set API ....................................................... 454Move Display Sets ........................................................................................................................ 455Move and Rotate Display Sets ..................................................................................................... 455
Set Window Size ................................................................................................................................. 457Set Window Size Dialog Box ........................................................................................................ 458
Rendering Photo-Realistic Images ........................................................................................................ 459
Configure Photo-Realism Settings ...................................................................................................... 461Photo-Realism Settings Dialog Box ............................................................................................. 462
Set Global Lighting .............................................................................................................................. 470Global Lighting Dialog Box ........................................................................................................... 471
Place a New Point Light ...................................................................................................................... 478Place a New Distant Light ................................................................................................................... 479
-
7/25/2019 SmartPlant Review for dummies
13/590
Contents
SmartPlant Review User's Guide 13
Place a New Spot Light ....................................................................................................................... 480New Light Dialog Box ................................................................................................................... 480
Edit Source Light ................................................................................................................................. 486Edit Source Lights Dialog Box ...................................................................................................... 487
Lighten Shadows................................................................................................................................. 488
Delete a Source Light ......................................................................................................................... 488
Delete Source Lights Dialog Box .................................................................................................. 489
Raytrace a View .................................................................................................................................. 489Set a Raytrace Range ......................................................................................................................... 490Edit Raytracing Options ...................................................................................................................... 490
Using Collision Detection ....................................................................................................................... 491
Collision Detection Dialog Box ............................................................................................................ 492
Type Filter Tab (Collision Detection Dialog Box) ......................................................................... 493
Selection Tab (Collision Detection Dialog Box) ............................................................................ 495Geometry Filter Tab (Collision Detection Dialog Box) .................................................................. 496Color Tab (Collision Detection Dialog Box) .................................................................................. 497Sound Tab (Collision Detection Dialog Box) ................................................................................ 498Run Tab (Collision Detection Dialog Box) .................................................................................... 499
Select Filters for Collision Types ......................................................................................................... 500
Select Graphic Element Types ........................................................................................................... 501Select Objects and Range .................................................................................................................. 501Select Collision Display Colors ........................................................................................................... 502
Select Collision Sounds ...................................................................................................................... 502
Run Collision Detection ....................................................................................................................... 503Run Collision Detection Against Point Cloud Data ............................................................................. 504View Collision Reports ........................................................................................................................ 505
Report Collision Detection Results Dialog Box ............................................................................ 506
Collaborating with Others....................................................................................................................... 507
Use NetMeeting .................................................................................................................................. 509
Start a Collaboration Session ............................................................................................................. 509
Rejoin a Collaboration Session ........................................................................................................... 510
Edit a Collaboration Session ............................................................................................................... 511Collaboration Settings Dialog Box ................................................................................................ 511
Using ScheduleReview ........................................................................................................................... 515
Create a New ScheduleReview Project .............................................................................................. 515New ScheduleReview Project Dialog Box .................................................................................... 518
Set the Active Project .......................................................................................................................... 518
Select ScheduleReview Projects Dialog Box ............................................................................... 518
Refresh Active Project ........................................................................................................................ 518
Use Project Manager to Add a ScheduleReview Project to a Model .................................................. 519Edit a ScheduleReview Project in Project Manager ........................................................................... 519
Define ScheduleReview Settings ........................................................................................................ 520ScheduleReview Settings Dialog Box .......................................................................................... 520
Set ScheduleReview Project Settings .......................................................................................... 527Set ScheduleReview Animation Settings ..................................................................................... 527Set ScheduleReview Snapshot Settings ...................................................................................... 528Set Review Control Settings ......................................................................................................... 528
Set Task Symbology ........................................................................................................................... 529
-
7/25/2019 SmartPlant Review for dummies
14/590
Contents
14 SmartPlant Review User's Guide
Task Symbology Dialog Box ........................................................................................................ 529Create a New ScheduleReview Query ............................................................................................... 530
New ScheduleReview Query Dialog Box ..................................................................................... 531Edit a ScheduleReview Query ............................................................................................................ 532
Edit/New ScheduleReview Query Dialog Box .............................................................................. 533
Import ScheduleReview Projects ........................................................................................................ 534
Export ScheduleReview Projects ........................................................................................................ 535
Auto-Association Tasks ...................................................................................................................... 535Auto-Association Dialog Box ........................................................................................................ 536
Add a ScheduleReview Association ................................................................................................... 537Add Association Dialog Box ......................................................................................................... 537
Remove a ScheduleReview Association ............................................................................................ 537Delete a Project................................................................................................................................... 538
Delete ScheduleReview Projects Dialog Box ............................................................................... 538Use Review Controls .......................................................................................................................... 538
Play a ScheduleReview Project ................................................................................................... 539
View a ScheduleReview Project at a Specific Percent Complete ................................................ 539
Pause a ScheduleReview Session ............................................................................................... 539Stop a ScheduleReview Session ................................................................................................. 540
Step Forward Through a ScheduleReview Session ..................................................................... 540Step Back Through a ScheduleReview Session .......................................................................... 540
Restart a ScheduleReview Session ............................................................................................. 540Go to the End of a ScheduleReview Session .............................................................................. 541Go to a Specific Date in a ScheduleReview Session ................................................................... 541Record a ScheduleReview Session ............................................................................................. 541
SmartPlant Review Utilities .................................................................................................................... 543
Using the Select Modules Utility ......................................................................................................... 543Select Licenses for Modules ........................................................................................................ 544Select Modules Utility Dialog Box ................................................................................................. 545
Using the SmartPlant License Checkout Utility .................................................................................. 546Install SmartPlant License Checkout Utility .................................................................................. 546
Check Out a License for SmartPlant Review ............................................................................... 548
License Checkout Utility Dialog Box ............................................................................................. 549
Troubleshooting ...................................................................................................................................... 551
Performance Tips ................................................................................................................................ 551Troubleshooting: General Viewing Issues .......................................................................................... 556Troubleshooting: Animation and Lighting ........................................................................................... 558Troubleshooting: Annotations ............................................................................................................. 560Troubleshooting: Motion ..................................................................................................................... 560Troubleshooting: Primavera Version Changes ................................................................................... 561Troubleshooting: Printing Limitations .................................................................................................. 562Troubleshooting: Tips for Streaming Data .......................................................................................... 562
Troubleshooting: Viewing SmartPlant 3D Data .................................................................................. 564Set Number of Processors for Rendering ........................................................................................... 565
Troubleshoot 3D Navigation ............................................................................................................... 565Checking Hardware Acceleration Settings - Microsoft Vista/Windows 7Instructions ................................................................................................................................... 568Checking Hardware Acceleration Settings - Microsoft Windows XP Instructions ........................ 571
-
7/25/2019 SmartPlant Review for dummies
15/590
Contents
SmartPlant Review User's Guide 15
Glossary ................................................................................................................................................... 575
Index ......................................................................................................................................................... 583
-
7/25/2019 SmartPlant Review for dummies
16/590
-
7/25/2019 SmartPlant Review for dummies
17/590
SmartPlant Review User's Guide 17
This document is the user's guide for SmartPlant Review. The content is the same as the onlineHelp delivered inside the product.
This user's guide explains various procedures and commands needed to review a complexmodel and is intended for users who are experienced with computer fundamentals. Knowledgeof 3D design systems is helpful, but not necessary.
Intergraph gives you permission to print as many copies of this document that you need fornon-commercial use at your company. You cannot print this document for resale or redistributionoutside your company.
SmartPlant Review, SmartPlant Review Publisher and other add-on utilities support bothSmartPlant 3D and SmartMarine 3D project files. For simplicity in the documentation, thereferences to SmartPlant 3D imply both SmartPlant 3D and SmartMarine support.
We welcome comments or suggestions about this documentation. You can send us an email at:[email protected].
Preface
-
7/25/2019 SmartPlant Review for dummies
18/590
Preface
18 SmartPlant Review User's Guide
-
7/25/2019 SmartPlant Review for dummies
19/590
SmartPlant Review User's Guide 19
Version 2010
The SmartPlant 3D Label Selector utility has been updated to display a tree view of mappedand unmapped label names. The mapped label names are organized in a Relationship >Component > Label name hierarchy. A Find feature has also been added so that you cansearch the tree view for specific label names. See Viewing SmartPlant 3D Model Data(onpage159).
You can enable the display of general notes from Smart 3D project files in SmartPlantReview. See View General Notes from SmartPlant 3D(on page171).
The rendering of any transparent insulation aspect geometry is simplified in shaded modelviews by removing its end caps and back faces.
SmartPlant Review is now supported on the following operating systems:
Microsoft 64-bit Windows Standard/Enterprise Server 2008 (R2)
Microsoft 32-bit Windows 7 Professional and Enterprise Client
Microsoft 64-bit Windows 7 Professional and Enterprise Client
The Partial Recall and Key Frame Animation functionality is now provided in the baseproduct. (P3 PB: 117177)
A toggle has been added that turns on or off the display of the material application assignedto the selected display set or the selected display set folder node in the Project Manager.See Display Materia