smith 2 drawer bedsidewarnings do’s don’ts approximate time to assemble tradesman’s tips tools...

Produced in The Netherlands for TESCO Stores Ltd.

© Tesco 2016.

Product size:

H398 x W400 x D390mm

catalogue ref:

Smith 2 Drawer BedsideAssembly instructions

www.tesco.com

DR825102

Warnings

Do’s

Don’ts

Approximate time to assemble

Tradesman’s tips

Tools required

IMPORTANT! RETAIN THESE

INSTRUCTIONS FOR FUTURE REFERENCE

Failure to follow the warnings could result in serious

injury.

During assembly children should be kept away from the

product due to possible risk of injury.

Ensure that this product is fully assembled as illustrated

and that all fittings are tightened properly before use

Do not use this product if parts are missing, damaged or

worn.

We recommend the use of the wall strap provided for

safety reasons. N.B. Wall fixings are not included –

please source suitable fixings for your wall type. If in

doubt please consult a qualified tradesperson. Warning:

Always ensure the area to be drilled is free from hidden

electrical wires, water and gas pipes.

Do not sit or stand on the product.

This product should only be used on firm, level ground.

Make sure the legs remain in contact with the ground.

During assembly keep small parts out of reach of

children.

Check all screws or bolts are tightened and inspect

regularly.

When you are ready to start, make sure that you have

plenty of space and a clean, dry area for assembly

Due to the size of this product we recommend that it is

assembled in the room intended for use

Unwrap all packaging materials and place the compo-

nents on top of the carton box or on a clean floor to

prevent it from scratching

Check the pack and make sure you have all the parts

listed

Do not use power tools to construct this product

To clean wipe with a sponge and warm soapy water.

Do not overtighten screws or bolts.

Do not use scourers, abrasives (including washing

powders), bleach or solvent based cleaners as they can

bleach or damage the product.

Number of people required to assemble

One person to assemble the product and two persons to

lift the product into position.

HI! Look out for me throughout this manual. Wherever

you see my picture I will have a handy tip to help you

with the assembly of your product.

My first tip is... After unpacking the product open out the

carton and lay it on the floor to protect your new product

and the floor during assembly.

2

Smith 2 Drawer Bedside

© Tesco 2016.Produced in The Netherlands for TESCO Stores Ltd.

www.tesco.com

2 hours

not supplied not supplied not suppliednot supplied

PZ1

not supplied

PZ2

not suppliedsupplied

Before you start

3


To view our full furniture range please visit direct.tesco.com


www.tesco.com

Further help

Our Promise

We are Happy to refund or replace any Tesco product

which falls below the standard you expect. Just ask any

member of staff. This will not affect your statutory rights.

Missing parts

If you are missing any fixtures or fittings for your product

please contact 0800 323 4050 and we will be happy to

send you a replacement part free of charge.

Faulty product

If you have a fault with your product please contact our

customer service team on 0800 323 4050.

If you have had the product for 30 days or less you may

be offered a replacement, refund or for a fully trained

home service technician to visit your home to assess the

fault and repair the product where possible.

If you have had the product for more than 30 days we

may send an independent home service technician to

review and repair product where possible and recom-

mend further action.

The Furniture Ombudsman

As part of our commitment to maintaining high standards

and responsible furniture retailing, Tesco is a Full

Member of The Furniture Ombudsman. This means that

if you’re not entirely satisfied with your purchase - and we

haven’t managed to resolve the problem - you can

contact them to look into it for you. By signing up to The

Furniture Ombudsman Code of Practice we promise to

follow their decisions - ensuring that you get a fair deal.

This means that you can buy in complete confidence

when selecting your furniture from Tesco.

You should first discuss your complaint with our Custo-

mer Service team on 0800 323 4050 so that we can try to

solve any issues. After that, if you’re still not happy you

can contact The Furniture Ombudsman at

www.thefurnitureombudsman.org

You can write to us at

Tesco Stores Ltd

Welwyn Garden City

AL7 1GA,

U.K.

4


Getting to know your product


www.tesco.com

1

2

3

45

5

6

6

7

7

8

8

9

9

10

10

© Tesco 2016. 5

10

0mm

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

250

260

270

280


Ref

Components supplied (not actual size)

QtyVisualDimensions (mm)

1 400 x 387 x 18

2 391 x 353 x 2.5

3 380 x 370 x 15

4 380x 370 x 15

5 367 x 60 x 15

6 361 x 156 x 15

7 350 x 140 x 12.5

8 350 x 140 x 12.5

1

1

1

1

2

2

2

2

Produced in The Netherlands for TESCO Stores Ltd.

www.tesco.com

P1832

BO3105

P2906

P2905

P7029

P4625

LA1615

LA1614

9 317 x 140 x 12.5 2LA1618

10 328 x 344 x 2.5 2

BO3607

H

I

4

J

4

K

L

M

N

O

P

4

2

2

2

2

2

1

1

A

4.0 x 12.5

1.5 x 25

D

C

E

F

G

6.3 x 10

8

8

4

30

8

5.0 x 24

8.0 x 30

Fixtures and fittings supplied (not actual size)

Ref QtyVisual

Fixtures and fittings supplied (actual size)

Ref QtyVisualDimensions (mm)

FK1011

FK1301

B 3.0 x 15 28FK1311

FK1309

FA1515

FK1411

FK1012

FK1010

FK1250

GR1864

FA1510

FK1415

PM1517LA

PM1517LB

PM1517RA

PM1517RB

12mm

15mm

a

b

6

Smith 2 Drawer Bedside assembly instructions

1

2


www.tesco.com

K x1-

not supplied

PZ2 G x412mm

Insert the cam lock into the face of the panel in the positions shown. Ensure that the opening in the base of the cam faces the hole in the edge of the panel as shown; this allows the head of the cam dowel to locate properly in the cam lock.

x2

x2

7

8

Your furniture is assembled using a cam lock

and dowel system. This system combines a

quick and easy assembly with strength and a

clean finish.

G

G

8

7

9

K

G

a

7


3

4


www.tesco.com

A x4 5 x 24

not supplied

PZ2

x2

x2

A

10

6

A

A

Screw the cam dowel into the panel in the

positions shown. Take care to ensure that the

dowel is straight, and is inserted the full lenght

of the threaded section

8


5

6


www.tesco.comnot supplied

PZ2

I x4

x2

x2

K

6

8

7

10

I

I

I

Using a hand screwdriver, turn the cam lock

clockwise intil handtight. This will take less than

one full turn and will tighten the cam in the dowel,

pulling the panels together to create a tight joint.

9


7

8


www.tesco.com

J x2-

C x4 4 x 12.5

not supplied

PZ2

3.0 x 15B x16

not supplied

PZ1

M x2-

O x2-

x2

x2

M

O

B

B B

B

B

B

B

B

J

C

C

10


9

10


www.tesco.com

F x8 8 x 30

not supplied

K x1-

A x4 5 x 24

not supplied

PZ2

x2

A

A

A

A

A

1

5

F

F

F

F

K

Screw the cam dowel into the panel in the

positions shown. Take care to ensure that the

dowel is straight, and is inserted the full lenght

of the threaded section

11


11

12


www.tesco.com

Insert the cam lock into the face of the panel in the positions shown. Ensure that the opening in the base of the cam faces the hole in the edge of the panel as shown; this allows the head of the cam dowel to locate properly in the cam lock.

not supplied

PZ2 H x415mm

D x8 6.3 x 10

not supplied

PZ2

N x2-

P x2-

H

H

H

HH

3

4

N

P

D D

D D

D

D

D

D

D

DD

D

N

N

P

P

3

4

12


13

14


www.tesco.com

K x1-

3.0 x 15B x12

not supplied

PZ1

BB

B

BB

B

B

BB

BB

B

B B B

B B B

K

5

5

3

4

3

4

13


15

16


www.tesco.com

K x1-

x4

H

3

5

5

4

K

1

3

4

Using a hand screwdriver, turn the cam lock

clockwise intil handtight. This will take less than

one full turn and will tighten the cam in the dowel,

pulling the panels together to create a tight joint.

14


17

18


www.tesco.com

E x30 1.5 x 25

not supplied not suppliedsupplied = L

+/- 150m

m

(+/-

6 inch)E

L

E

13

2

1. Bestudeer zorgvuldig de montagetekening voordat u met monteren begint.

2. Neem de onderdelen en panelen voorzichtig uit de verpakking en leg ze op volgorde en controleer of alles compleet is.

3. Leg het verpakkingsmateriaal ter bescherming onder het te monteren artikel.

4. Volg met het monteren exact het stappenplan zoals in de tekening aangegeven.5. Begin met het monteren, wees voorzichtig, forceer niets.

6. Bewaar deze montagetekening zorgvuldig. U heeft deze misschien nodig in het geval u onderdelen wilt aanvragen.

1. Study the assembly drawing carefully before starting the assembly.

2. Carefully remove the parts and panels from the packing and place them in sequence. Check to see that nothing is missing.

3. For extra protection, place the packing material under the item to be assembled.

4. When assembling, follow the step-by-step instructions exactly as given on the drawing.

5. Start the assembly. Be careful not to force anything.6. Take care to save the assembly drawing. It could be needed in case you need to order parts.

1. Studieren Sie die Montagezeichnung gut, bevor Sie mit der Montage beginnen.

2. Nehmen Sie die Zubehörteile und Paneelen vorsichtig aus der Verpackung, legen Sie sie in die richtige

Reihenfolge und kontrollierenSie, ob alles komplett ist.3. Legen Sie das Verpackungsmaterial zum Schutz unter den zu montierenden Artikel.

4. Folgen Sie bei der Montage genau dem Schritteplan, wie er in der Zeichnung angegeben ist.

5. Beginnen Sie mit der Montage, seien Sie vorsichtig, übereilen Sie nichts.

6. Bewahren Sie diese Montagezeichnung gut auf. Sie benötigen diese möglicherweise zur Bestellung von Zubehörteilen.

1. Montaj i?ine ba?lamadan önce montaj resmini dikkatle inceleyiniz.

2. Parçaları ve panoları ambalajından özenle çıkartınız, sıraya koyunuz ve her?eyin tam olup olmadı?ını kontrol ediniz.

3. Monte edilecek nesnenin altına, koruma amacıyla ambalaj malzemesi seriniz.

4. Montaj sırasında resimde belirtildi?i gibi safha planını takip ediniz.

5. Montaja ba?layınız, dikkatli olunuz ve hiç bir parçayı zorlamayınız.6. Bu montaj resmini iyice saklayınız. ?leride parça ihtiyacı sırasında gerekli olabilir.

1. Examinez soigneusement le croquis avant de procéder au montage.

2. Sortez soigneusement les pièces et les panneaux de leur emballage, placez-les dans l’ordre et assurez-vous que rien nemanque.

3. Placez le matériel d’emballage protecteur sous l’article à monter.

4. Suivez scrupuleusement les étapes de montage comme indiqué sur le croquis.

5. Commencez le montage. Soyez prudent et ne forcez pas.6. Conservez soigneusement le croquis de montage. Vous en aurez peut-être besoin lorsque vous souhaiterez remplacer un élément.

montage tekeningassembly drawing

montagezeichnungcroquis

montaj resmini

smith 2 drawer bedsidewarnings do’s don’ts approximate time to assemble tradesman’s tips tools...

Documents