SMTP Authentication Email Setup (POP3) In order to account for dynamic IP addresses and remote users, Reflexion has developed an SMTPAuthentication feature to enable users to send directly to the Reflexion server. This documentdescribes the implementation of the SMTP Authentication using SSL. Changing Outbound SMTP Server on Microsoft Outlook Changing Outbound SMTP Server on Mozilla Thunderbird Changing Outbound SMTP Server on Qualcomm Eudora Microsoft Outlook Instructions for SMTP AuthenticationStep 1: Change the Outgoing mail server (SMTP): to the asp server that you are setup on, i.e. asp-0,asp-1, asp-2, etc.

Then click on “More Settings …”

yourdomain.ext

yourdomain.ext

8asp-8-submit.reflexion.net

Change the Outgoing mail server (SMTP) to: asp-8-submit.reflexion.net

Step 2: Once you click on “More Settings …”, click on the Outgoing Server tab, and check “Myoutgoing server (SMTP) requires authentication. Then select “Log on using” and enter in your emailaddress and the Reflexion password that was assigned to you.

Once this is complete, go to the “Advanced Tab”.

yourdomain.ext

Step 3: Within the Advanced tab, under “Outgoing server (SMTP):”, check “This server requires anSSL-secured connection.”

Hit ok and finish and run a test message. If you receive an error that your server does not supportSSL connections, please change the Outgoing server (SMTP) to port 2525, and that should solve theproblem.

587

Changing Outbound SMTP Server on Mozilla Thunderbird Step 1: Tools > > Account Settings:

Step 2: Under Account Settings, change the server name to the ASP server you are setup on, i.e.asp-0, asp-1, etc. You can choose to leave Port 25, or if your ISP does not allow Port 25 traffic,Reflexion supports SMTP Authentication on Port 2525. Enter in your email address and select TLS.

yourdomain.ext

asp-8.yourdomain.ext

yourdomain.ext

587asp-8-submit.reflexion.net

Under Account Settings change the Outgoing mail server (SMTP) to: asp-8-submit.reflexion.net and the Port to 587.Enter in your email address and select TLS.

When prompted for a password, you need to enter in the password that was auto-generated by theReflexion server. Once complete, send test messages to ensure setup is correct. Changing Outbound SMTP Server on Qualcomm Eudora Step 1: Go to Tools, Options.

Step 2: Change the SMTP Server to the ASP server you are setup on, i.e. ASP-0, ASP-1, ASP-2, etc.Pull-down the Secure Sockets when Sender menu, and select Required, STARTTLS.

The first outbound message you send will prompt you for your Reflexion Password:

If there are any problems or errors, please contact your Net Services International technical representative for more information. support@netservices.co.uk

yourdomain.ext

yourdomain.ext

8asp-8-submit.reflexion.net

Step 2: Change the Outgoing mail server (SMTP) to: asp-8-submit.reflexion.net Pull-down the “Secure Sockets when sending” menu, and selectIf Available, STARTTLS