SMV Rapid is a large forwarder that loads 16 metric tons and is available in versions with 6 or 8 wheels. It has a low and strong frame design and axles with a large bogie movement, which in com-bination with the large 30.5 inch wheels give good ground clearance yet still a low centre of gravity on the load. The wagon is available in different frame lengths and has moveable bunks and front gate, which means the load area, can be adapted to the customers needs. When the terrain is difcult the forwarder can be equipped with tracks on the front and rear bogies.

The forwarder loader RK 90, which is designed for SMV Rapid, has a good reach and is quick and easy to operate as the forwarder has a well-dimensioned hydraulic system with large oil capacity. The loader is also available in a long loader version with a reach of just over 9 metres.

ENGINEJOHN DEERE 6068 HF 485, Tier 3.6 cylinder turbo engine with intercoolerCylinder volume ............6,8 litres (415 in)Torque at 1200 rpm .....838 Nm (618 lbf ft)Output at 1600 rpm ......137 kW (184 hp)Fueltank ........................195 litres (53 US.gal)TRANSMISSIONHydrostatic/mechanical with power con-trol, 2 geared drop box with disengagablewagon drive. Single axle front and gearedbogie rear, both with manual differentiallock.Tractive force ......160 kN (35 950 lbf)Speed [L] ..............07,5 km/h (04,7 mph)Speed [H] .............025 km/h (015,5 mph)BRAKES2 circuit pneumatic/hydraulic wet discbrakes placed between bogie box and hubreduction and automatic loading brake.Spring assisted parking brake andemergency brake.WHEELS6WDFront ................................700/70 x 34*Rear...................................620/55 x 30,5*...........................................700/50 x 30,58WD................................620/55 x 30,5*............................................700/50 x 30,5*) standardHYDRAULIC SYSTEMThe machine has separate systems.One for the transmission and onefor the working hydraulics.Working hydraulics:Unloaded constant pressure. System withlters in return and leak line. Extra nelter cirquit (3 ) with water separation.Pump capacity..............260 l / 1 500 rpm(69 US gal)Working pressure ..... 3,022,0 MPa (440-3200 psi)Filtering degree ..........10 abs (10 micron)Tank volume ...............150 l (40 US gal)

ELECTRIC SYSTEM24 volt system with IQAN control systemSystem voltage ............................. 24 VAlternator ..................................... 2 x 55 ABattery ........................................... 2 x115 AhWorking light .................................20 x 70 W

STEERINGHydraulically controlled articulated steering joint with double acting cylinders. Steering wheel control by orbitrol, propor-tionally controlled off-road steering.Max steering angle .........................+/- 42Max steering torque, (8WD) ...... 75 kNm (55 430 lbf ft)

FRAMESWelded puller frame with integrated steering joint. Wagon with parallel frame, movable bunks and stabilizer. The wagon frame is available in two different lengths.Loading area, timber ...........4,85 m2 (52ft2)Loading area, pulp ................5,80 m2 (62 ft2)

CABRubber mounted welded safety cab with damping materials in oor, walls and ceiling. Rear window and rear side windows of polycarbonate.Air suspended, electrically heated seat. Air condition with automatic control ACC and pollen lter. Sound level below 78 dBA.

LOADERRK-125Knuckle boom loader with xed tower. Re-volving house with double swing cylinders. 1,4 m extension and endless rotator.Hultdin Grapple SG360.Lifting torque, gross/net ........125/96 kNm

(92 200/70 800 lbf ft)Torque, net ..............25 kNm (18 400 lbf ft)Slewing arc ...............375Outreach ..................7,1 m (23 ft)

WEIGHTService weight6WD: .........................15 500 16 400 kg

(34 200 36 200 lb)8WD: .........................17 500 19 200 kg

(38 600 42 300 lb)Max. load: ..................16 000 kg (35 300 lbs)

EQUIPMENTSStandard: Fire extinguisher. Service equipment with technical documentation and complete set of tools. Pressure air equipment for tyre pumping etc. Radio with CD-player.Extra: Engine/cab preheaterwith heating coil for hydraulic tank. Sun visors. Skylight window. Sprinkler system. Vaccum pump.Air vent drivers seat. Dozer blade. Xenon working light. Double telescope. Rear vision system. Biodegradeable oil. Chains. Tracks.

Height adjustable and movable front gate

SMV Rapid with tracks

SMV RAPID

SM

V R

AP

ID

inchmm

378"9600

91"46"max.2300min.1160

109"63"max.2750min.1610

59"28"max.1500min.720

16"400

27"

685

146"

3700

27"

700

113"2880

Ritn. nr. 22376 Datum 00-12-11MJSMV Rapid 8WD, stor boggi

27"

700

141"

3580

142"3595

209"5300

31"790

31"790

68"1720

600x30,5

60

0x30,5

PR

OF

ITA

BLE

Specications and equipment are subject to alteration. Images do not always show the machine in its standard design.

ROTTNE INDUSTRI ABFabriksvgen 12

SE 360 40 RottnePhone: +46 470 75 87 00

Fax: +46 470 75 87 01www.rottne.com

TECHNICAL SPECIFICATION

STRONG AND RELIABLE

creo

ROTTNESMV Rapid has a 6 cylinder turbo engine with intercooler that together with the IQAN controlled hydrostatic transmission equips the forwarder with high tractive force, dynamic driving charac-teristics and good fuel economy.

The cab is large and spa-cious offering very good visibility and all operating functions are placed around the operator position. The air conditioner with ACC has a newly developed lter system on the fresh air intake with a large lter area that gives good air exchange and also lters recirculated air.

The wagons long frame structure and the bunks wide and deep centre section give a very low centre of gravity, making the forwarder extremely stable in all types of terrain.

The wagon has a large load area, which gives good load volumes even with short timber lengths, but can also be loaded with double layers when the machine is ordered with a longer frame.

The rear of the wagon frame is bolted and can easily be dismantled making the forwarder short and compact when the clam bunk or ground preparation unit are tted. SMV Rapid has not only become a popular machine for these applications, but also as a carrier of chipping equipment.

Substantial resources are demanded of a large forwarder, which is used most of the time for heavy felling with long driving distances. SMV Rapid is a forwarder with a large load capacity and has become known as a very reliable and dependable large forwarder. The large wide wheels give excellent ground clearance, roll easily and give a good bearing capacity that can be improved yet further by using tracks.

ROTTNESMV Rapid has a 6 cylinder turbo engine with intercooler that together with the IQAN controlled hydrostatic transmission equips the forwarder with high tractive force, dynamic driving charac-teristics and good fuel economy.

The cab is large and spa-cious offering very good visibility and all operating functions are placed around the operator position. The air conditioner with ACC has a newly developed lter system on the fresh air intake with a large lter area that gives good air exchange and also lters recirculated air.

The wagons long frame structure and the bunks wide and deep centre section give a very low centre of gravity, making the forwarder extremely stable in all types of terrain.

The wagon has a large load area, which gives good load volumes even with short timber lengths, but can also be loaded with double layers when the machine is ordered with a longer frame.

The rear of the wagon frame is bolted and can easily be dismantled making the forwarder short and compact when the clam bunk or ground preparation unit are tted. SMV Rapid has not only become a popular machine for these applications, but also as a carrier of chipping equipment.

Substantial resources are demanded of a large forwarder, which is used most of the time for heavy felling with long driving distances. SMV Rapid is a forwarder with a large load capacity and has become known as a very reliable and dependable large forwarder. The large wide wheels give excellent ground clearance, roll easily and give a good bearing capacity that can be improved yet further by using tracks.

ROTTNESMV Rapid has a 6 cylinder turbo engine with intercooler that together with the IQAN controlled hydrostatic transmission equips the forwarder with high tractive force, dynamic driving charac-teristics and good fuel economy.

The cab is large and spa-cious offering very good visibility and all operating functions are placed around the operator position. The air conditioner with ACC has a newly developed lter system on the fresh air intake with a large lter area that gives good air exchange and also lters recirculated air.

The wagons long frame structure and the bunks wide and deep centre section give a very low centre of gravity, making the forwarder extremely stable in all types of terrain.

The wagon has a large load area, which gives good load volumes even with short timber lengths, but can also be loaded with double layers when the machine is ordered with a longer frame.

The rear of the wagon frame is bolted and can easily be dismantled making the forwarder short and compact when the clam bunk or ground preparation unit are tted. SMV Rapid has not only become a popular machine for these applications, but also as a carrier of chipping equipment.

Substantial resources are demanded of a large forwarder, which is used most of the time for heavy felling with long driving distances. SMV Rapid is a forwarder with a large load capacity and has become known as a very reliable and dependable large forwarder. The large wide wheels give excellent ground clearance, roll easily and give a good bearing capacity that can be improved yet further by using tracks.

SMV Rapid is a large forwarder that loads 16 metric tons and is available in versions with 6 or 8 wheels. It has a low and strong frame design and axles with a large bogie movement, which in com-bination with the large 30.5 inch wheels give good ground clearance yet still a low centre of gravity on the load. The wagon is available in different frame lengths and has moveable bunks and front gate, which means the load area, can be adapted to the customers needs. When the terrain is difcult the forwarder can be equipped with tracks on the front and rear bogies.

The forwarder loader RK 90, which is designed for SMV Rapid, has a good reach and is quick and easy to operate as the forwarder has a well-dimensioned hydraulic system with large oil capacity. The loader is also available in a long loader version with a reach of just over 9 metres.

ENGINEJOHN DEERE 6068 HF 485, Tier 3.6 cylinder turbo engine with intercoolerCylinder volume ............6,8 litres (415 in)Torque at 1200 rpm .....838 Nm (618 lbf ft)Output at 1600 rpm ......137 kW (184 hp)Fueltank ........................195 litres (53 US.gal)TRANSMISSIONHydrostatic/mechanical with power con-trol, 2 geared drop box with disengagablewagon drive. Single axle front and gearedbogie rear, both with manual differentiallock.Tractive force ......160 kN (35 950 lbf)Speed [L] ..............07,5 km/h (04,7 mph)Speed [H] .............025 km/h (015,5 mph)BRAKES2 circuit pneumatic/hydraulic wet discbrakes placed between bogie box and hubreduction and automatic loading brake.Spring assisted parking brake andemergency brake.WHEELS6WDFront ................................700/70 x 34*Rear...................................620/55 x 30,5*...........................................700/50 x 30,58WD................................620/55 x 30,5*............................................700/50 x 30,5*) standardHYDRAULIC SYSTEMThe machine has separate systems.One for the transmission and onefor the working hydraulics.Working hydraulics:Unloaded constant pressure. System withlters in return and leak line. Extra nelter cirquit (3 ) with water separation.Pump capacity..............260 l / 1 500 rpm(69 US gal)Working pressure ..... 3,022,0 MPa (440-3200 psi)Filtering degree ..........10 abs (10 micron)Tank volume ...............150 l (40 US gal)

ELECTRIC SYSTEM24 volt system with IQAN control systemSystem voltage ............................. 24 VAlternator ..................................... 2 x 55 ABattery ........................................... 2 x115 AhWorking light .................................20 x 70 W

STEERINGHydraulically controlled articulated steering joint with double acting cylinders. Steering wheel control by orbitrol, propor-tionally controlled off-road steering.Max steering angle .........................+/- 42Max steering torque, (8WD) ...... 75 kNm (55 430 lbf ft)

FRAMESWelded puller frame with integrated steering joint. Wagon with parallel frame, movable bunks and stabilizer. The wagon frame is available in two different lengths.Loading area, timber ...........4,85 m2 (52ft2)Loading area, pulp ................5,80 m2 (62 ft2)

CABRubber mounted welded safety cab with damping materials in oor, walls and ceiling. Rear window and rear side windows of polycarbonate.Air suspended, electrically heated seat. Air condition with automatic control ACC and pollen lter. Sound level below 78 dBA.

LOADERRK-125Knuckle boom loader with xed tower. Re-volving house with double swing cylinders. 1,4 m extension and endless rotator.Hultdin Grapple SG360.Lifting torque, gross/net ........125/96 kNm

(92 200/70 800 lbf ft)Torque, net ..............25 kNm (18 400 lbf ft)Slewing arc ...............375Outreach ..................7,1 m (23 ft)

WEIGHTService weight6WD: .........................15 500 16 400 kg

(34 200 36 200 lb)8WD: .........................17 500 19 200 kg

(38 600 42 300 lb)Max. load: ..................16 000 kg (35 300 lbs)

EQUIPMENTSStandard: Fire extinguisher. Service equipment with technical documentation and complete set of tools. Pressure air equipment for tyre pumping etc. Radio with CD-player.Extra: Engine/cab preheaterwith heating coil for hydraulic tank. Sun visors. Skylight window. Sprinkler system. Vaccum pump.Air vent drivers seat. Dozer blade. Xenon working light. Double telescope. Rear vision system. Biodegradeable oil. Chains. Tracks.

Height adjustable and movable front gate

SMV Rapid with tracks

SMV RAPIDS

MV R

AP

ID

inchmm

378"9600

91"46"max.2300min.1160

109"63"max.2750min.1610

59"28"max.1500min.720

16"400

27"

685

146"

3700

27"

700

113"2880

Ritn. nr. 22376 Datum 00-12-11MJSMV Rapid 8WD, stor boggi

27"

700

141"

3580

142"3595

209"5300

31"790

31"790

68"1720

600x30,5

60

0x30,5

PR

OF

ITA

BLE

Specications and equipment are subject to alteration. Images do not always show the machine in its standard design.

ROTTNE INDUSTRI ABFabriksvgen 12

SE 360 40 RottnePhone: +46 470 75 87 00

Fax: +46 470 75 87 01www.rottne.com

TECHNICAL SPECIFICATION

STRONG AND RELIABLE

creo

SMV Rapid is a large forwarder that loads 16 metric tons and is available in versions with 6 or 8 wheels. It has a low and strong frame design and axles with a large bogie movement, which in com-bination with the large 30.5 inch wheels give good ground clearance yet still a low centre of gravity on the load. The wagon is available in different frame lengths and has moveable bunks and front gate, which means the load area, can be adapted to the customers needs. When the terrain is difcult the forwarder can be equipped with tracks on the front and rear bogies.

The forwarder loader RK 90, which is designed for SMV Rapid, has a good reach and is quick and easy to operate as the forwarder has a well-dimensioned hydraulic system with large oil capacity. The loader is also available in a long loader version with a reach of just over 9 metres.

ENGINEJOHN DEERE 6068 HF 485, Tier 3.6 cylinder turbo engine with intercoolerCylinder volume ............6,8 litres (415 in)Torque at 1200 rpm .....838 Nm (618 lbf ft)Output at 1600 rpm ......137 kW (184 hp)Fueltank ........................195 litres (53 US.gal)TRANSMISSIONHydrostatic/mechanical with power con-trol, 2 geared drop box with disengagablewagon drive. Single axle front and gearedbogie rear, both with manual differentiallock.Tractive force ......160 kN (35 950 lbf)Speed [L] ..............07,5 km/h (04,7 mph)Speed [H] .............025 km/h (015,5 mph)BRAKES2 circuit pneumatic/hydraulic wet discbrakes placed between bogie box and hubreduction and automatic loading brake.Spring assisted parking brake andemergency brake.WHEELS6WDFront ................................700/70 x 34*Rear...................................620/55 x 30,5*...........................................700/50 x 30,58WD................................620/55 x 30,5*............................................700/50 x 30,5*) standardHYDRAULIC SYSTEMThe machine has separate systems.One for the transmission and onefor the working hydraulics.Working hydraulics:Unloaded constant pressure. System withlters in return and leak line. Extra nelter cirquit (3 ) with water separation.Pump capacity..............260 l / 1 500 rpm(69 US gal)Working pressure ..... 3,022,0 MPa (440-3200 psi)Filtering degree ..........10 abs (10 micron)Tank volume ...............150 l (40 US gal)

ELECTRIC SYSTEM24 volt system with IQAN control systemSystem voltage ............................. 24 VAlternator ..................................... 2 x 55 ABattery ........................................... 2 x115 AhWorking light .................................20 x 70 W

STEERINGHydraulically controlled articulated steering joint with double acting cylinders. Steering wheel control by orbitrol, propor-tionally controlled off-road steering.Max steering angle .........................+/- 42Max steering torque, (8WD) ...... 75 kNm (55 430 lbf ft)

FRAMESWelded puller frame with integrated steering joint. Wagon with parallel frame, movable bunks and stabilizer. The wagon frame is available in two different lengths.Loading area, timber ...........4,85 m2 (52ft2)Loading area, pulp ................5,80 m2 (62 ft2)

CABRubber mounted welded safety cab with damping materials in oor, walls and ceiling. Rear window and rear side windows of polycarbonate.Air suspended, electrically heated seat. Air condition with automatic control ACC and pollen lter. Sound level below 78 dBA.

LOADERRK-125Knuckle boom loader with xed tower. Re-volving house with double swing cylinders. 1,4 m extension and endless rotator.Hultdin Grapple SG360.Lifting torque, gross/net ........125/96 kNm

(92 200/70 800 lbf ft)Torque, net ..............25 kNm (18 400 lbf ft)Slewing arc ...............375Outreach ..................7,1 m (23 ft)

WEIGHTService weight6WD: .........................15 500 16 400 kg

(34 200 36 200 lb)8WD: .........................17 500 19 200 kg

(38 600 42 300 lb)Max. load: ..................16 000 kg (35 300 lbs)

EQUIPMENTSStandard: Fire extinguisher. Service equipment with technical documentation and complete set of tools. Pressure air equipment for tyre pumping etc. Radio with CD-player.Extra: Engine/cab preheaterwith heating coil for hydraulic tank. Sun visors. Skylight window. Sprinkler system. Vaccum pump.Air vent drivers seat. Dozer blade. Xenon working light. Double telescope. Rear vision system. Biodegradeable oil. Chains. Tracks.

Height adjustable and movable front gate

SMV Rapid with tracks

SMV RAPID

SM

V R

AP

ID

inchmm

378"9600

91"46"max.2300min.1160

109"63"max.2750min.1610

59"28"max.1500min.720

16"400

27"

685

146"

3700

27"

700

113"2880

Ritn. nr. 22376 Datum 00-12-11MJSMV Rapid 8WD, stor boggi

27"

700

141"

3580

142"3595

209"5300

31"790

31"790

68"1720

600x30,5

60

0x30,5

PR

OF

ITA

BLE

Specications and equipment are subject to alteration. Images do not always show the machine in its standard design.

ROTTNE INDUSTRI ABFabriksvgen 12

SE 360 40 RottnePhone: +46 470 75 87 00

Fax: +46 470 75 87 01www.rottne.com

TECHNICAL SPECIFICATION

STRONG AND RELIABLE

creo