snowflake book instruction
DESCRIPTION
Snowflake Book InstructionTRANSCRIPT
BOOK coVerSNOWFLAKE
INsPIratIoN BooK INstructIoN
2 /10 www.create-your-style.com
Article
Step 1
Quantity Colour codeColourSize
5328
Supplies
Book
Felt
Yarn
Tools
Beading needle
Iron
Needle
Scissors
Crystal Moonlight
Brown
Cream white
4 mm
14.5x21.5x4 cm
50x25 cm
110
8 m
001 MOL
1:3
BooK coVer
Article Product Group Article No. Amount Size Colour Colour Code
Beads 5328 110 pcs. 4 mm Crystal Moonlight 001 MOL
Supplies
Book, 14.5 x 21.5 x 4 cmFelt, brown, 50 x 25 cmYarn, cream white, 8 m
Tools
Beading needleIronNeedleScissors
CRYSTALLIZED™ – Swarovski Elements Supplies & Tools
Sewing
steP 1
Level of design: BEGINNERS
Have also a look at the text instruction at the last page!
Scale 1:3
3 /10 www.create-your-style.com
14.5 cm
21.5 cm
7 cm 7 cm
1 cm1 cm
1 cm
1 cm
14.5 cm 4 cm
4 /10 www.create-your-style.com
6 mm
1:1
Step 2
Step 3
x3
1:3
steP 2
steP 3
Scale 1:1
Scale 1:3
5 /10 www.create-your-style.com
Step 4
1:1
1 cm
1:11:1
Step 5
steP 4
steP 5
Scale 1:1
6 /10 www.create-your-style.com
Step 6
x4
1:3
Step 7
Repeat steps 4 - 6
steP 6
steP 7
Scale 1:3
Repeat steps 4 - 6
7 /10 www.create-your-style.com
1 m
Step 9
Step 8
Repeat step 3:
steP 8
steP 9Repeat step 3:
8 /10 www.create-your-style.com
Step 10
1:1
steP 10
Scale 1:1
9/10www.create-your-style.com
10/10www.create-your-style.com
steP 1: cut out a felt for the book cover according to the measurements as in step 1 in illustration. Placing the book on the felt cover, fold the cover inwards at both ends.
steP 2: the gap between the book and the edge of the cover should be around 6 mm. Fix it with pins like in picture in illustration. Pull out the book of the cover.
steP 3: as seen in the picture in illustration, sew some back stitches on to the corner with cream white yarn. the folded part should not be stitched over with these stitches; this would help in concealing the back stitches.
steP 4: after back stitches, cut off the short end of yarn and stitch to the front side as seen in the first picture in the illustration. Bring over the thread to the back side that is the folded side as seen in the second picture; you would stitch both of them together this time. Now repeat this to the other end having a gap of 1 cm between each stitch. remove the sewing needle.
steP 5: Insert the beading needle as we would continue with the beading needle now. as seen in the second picture in illustration. Insert one crystallIZeD™ Bead article 5328 4 mm in crystal and move over to the backside and pierce back in through the front side from exactly the same place where the thread had pierced though earlier. Now again over to the backside and pierce in through to the front side but this time without adding the bead and from the very same point where the threads has earlier pierced in. repeat this process until you reach though to the other end.
steP 6: towards the end of the other side make some back stitches to secure the whole thing and then cut of the left over thread.
steP 7; look at illustration; this is how it should look after the end of all the previous steps. Now repeat steps 4 - 6 for the other end of the book cover.
steP 8: Now iron the borders where the felt is folded inwards.
steP 9: cut a piece of the cream white yarn and repeat step 3 to make some back stitches at the back side of the cover and then stitch over to the front side.
steP 10: look at illustration for stitching the star can be seen in the pictures in this step. you insert four crystallIZeD™ Bead article 5328 for the bigger stars and two crystallIZeD™ Bead for the smaller ones and then go in this criss-cross fashion, each time taking four or two more beads. close each star with a few back stitches.
create your style with crystallIZeD™ – Swarovski Elements Inspiration Book scandinavia: snowflake Book cover