1.37 hrs

2 pcs

f

0.40 mm

k

0.60 mm

h

1

42.00 g

d

PrusaMK3/S

Summary

A nice soap box to store solid shampoo like Lush soaps. Since these soapstend to melt away easily when stored wet, this container has a lid to keepthem dry wehen not in use. Water can drain easily out the bottom. To usethe soap, just push on it trough the cutout in the bottom. One handedoperation is possible as well :-)

For the lid, use two M3x12mm screws. Glue the base and the spacertogheter, super glue works great.

Household > Bathroom

soapholder soapdish soap lush box bathroom

Print the spacer with brim. It might be needed to clean out the holes of thebase a bit to allow for easy rotation. Depending on your printer, the lidmight need a bit of cleanup aswell, since the gaps are fairly thight.

Markus

Soap box forshower

VIEW IN BROWSER

updated 7. 4. 2020 | published 7. 4. 2020

Print Files (.gcode) DOWNLOAD ALL FILES

675.3 KB

0.47 hrs f 0.40 mm k 0.60 mm h PLA 12.70 g d PrusaMK3/S

updated 7. 4. 2020

1.4 MB

0.90 hrs f 0.40 mm k 0.60 mm h PLA 28.80 g d PrusaMK3/S

updated 7. 4. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

44.6 KBupdated 7. 4. 2020

66.7 KBupdated 7. 4. 2020

99.1 KBupdated 7. 4. 2020

128.3 KBupdated 7. 4. 2020

175.6 KBupdated 7. 4. 2020

spacer_06n_04mm_pla_mk3s_28m.gcode

box_and_lid_06n_04mm_pla_mk3s_54m.gcode

spacer.stl

lid-blank.stl

lid-a.stl

lid-m.stl

lid-s.stl

233.6 KBupdated 7. 4. 2020

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

box.stl