System Requirements

Operating System: Win7/ Win10, Windows Server 2012/2016/2018, hyper V

Processor Server: Intel® Pentium® and above

Installed Memory (RAM): min. 8GB

Hard Disk: 80GB of free space

Built-in USB transmission interface

Software Download

SOYAL Software SeriesV211012

Software Manual

ISP Tool

SOYAL Website

02

02

03

01

01

05

07

08

09

Main Features

Note ID Setting

1

2

3

4

Software Window ntroduction

Software Operation

3-1 Execute ISP Tool ................................................

3-2 Software Window Introduction ............................

3-3 Model Name Selection ........................................

4-1 Upgrade Firmware for H Series Controller...........

4-2 Reset Master code for H Series Controller...........

4-3 Read EEPROM Data of H Series Controller.........

4-4 Write EEPROM Data of H Series Controller..........

....................................................................................

....................................................................................

Contents

10

10

Reference5 5-1 FAQ .....................................................................

5-2 YouTube Videos ..................................................

SOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD

RS485

SOYAL

ISP Tool Main functions :

Be suitable for firmware upgrading of Home H Series Controller、AR-716-E18(AR-

716E)、AR-716-E02(AR-721E)、AR-401 and AR-403 I/O Module

(※Note: SOYAL Proximity Readers only support to upgrade firmware via COM Port Communication)

Reset Master code for H Series Controller

Read EEPROM Data of H Series Controller

Write EEPROM Data of H Series Controller

Before Upgrading Firmware by ISP Tool, Node ID should be set for each device so it can communicate with computer, and then ISP Tool will be able to send commands to the assigned Node ID of each device.

node ID 001

AR-321-CM

AR-888-H

What to do if forget the node ID :If the node ID is forget or not confirmed, please refer to the below method to set node ID.

(Method 1)Use command to change Node ID (Be suitable for H series controller and master code is necessary)

(Method 2 )When only one controller is connected for firmware upgrade, you can enter 255 as Node ID instead of actual Node ID.

Step1 Enter programming Mode

Input 123456 or PPPPPP

Enter the program mode

Enter the program mode

[e.g.] The Default Value= 123456, if the Master Code is already changed= 876112, input 876112 → program

Step2 Change Node ID

Input 00 NNN [Node ID: 001~254; if the access controller is connected to AR-716E, its Node ID will be 001~016.]

1.

2.

Main Features

Node ID Setting

1. Main Features / 2. Note ID SettingSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD 01

1 4

56

789

2

3

1 4

3 6

2 5

7

8

9

Model Name Selection

Processing Status Bar

CommunicationPort Selection

Node ID Number

Load Firmware File

Upgrade Firmware

Reset Master Code

Read EEPROM User

Write EEPROM User

Execute ISP Tool

Software Window Introduction

3-1

3-2

After installing SoyalToolSetup ,Run ISP Tool on your computer:

（※Note: If your computer has running 701 Server software, you need to close 701Server before running this software to avoid communication port being occupied. Please make sure to install USB Driver before running the software.）

1

2

Shortcut “ SP Tool “ is created on Desktop and twice click to run ISP Tool

Or you can execute it on your computer > Start > Soyal Software folder > click to run ISP Tool

3. Execute ISP Tool

3. Software Window IntroductionSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD02

1

AR-101-H / AR-321-H / AR-331-H / AR-721-H / AR-725-H / AR-757-H / AR-888-H /AR-888-W / AR-323-D / AR-401 Series / AR-403 Series / AR-716-E02

The No.1 is suitable for below devices either EM Frequency or Mifare Frequency

Applicable Model Name:

Model Name Selection :3-3

3. Software Window IntroductionSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD 03

23

2

3

AR-716-E18

AR-101-U / AR-723-U / AR-721-K / AR-725-U / AR-725-K

Applicable Model Name:

Applicable Model Name:

The No.3 is suitable for Multi-door controller AR-716-E18

The No.2 is suitable for below Mifare Wigeand Readers

3. Software Window IntroductionSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD04

1

234

5

STEP 1 : Select the COM Port of the actual connected device.STEP 2 : Select the Model name according to the device you are using ( AR-888-H / Node ID 001 as example).STEP 3 : Enter the Node ID of the controller.STEP 4 : Load the correct firmware file.STEP 5 : Click “ Upgrade Target ” button to program.

4. Software Operation

Upgrade Firmware for H Series Controller4-1

4. Software OperationSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD 05

6

7

STEP 6 : The firmware is programming ( The bar indicate the programing status).

{※It is normal if some devices sound a long beep during the update process}

STEP 7 : The program is completed and click “Yes” to exit.

There is a risk in upgrading the firmware of the device. If the communication is interrupted during the upgrade process or using incorrect the firmware file to upgrade, the CPU of the device will be broken. Therefore, it is suggested that the distance between the device and computer is as short as possible, and it is best to only connect one device under USB Converter to upgrade and disconnected other devices in the same communication port. Home H series devices do not support updating firmware via TCP/IP communication interface.

Note:

4. Software OperationSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD06

1

23

4

5

STEP 1 : Select the COM Port of the actual connected device.STEP 2 : Select the Model name according to the device you are using ( AR-888-H / Node ID 001 as example).STEP 3 : Enter the Node ID of the controller. (※ If Node ID is forgotten, please enter “255” as Node ID).STEP 4 : Click “Reset Master Code “ option to start to reset.STEP 5 : Till Pop-up the window as below, that indicate Master Code has been reset to default value 123456

Reset Master code for H Series Controller 4-2

4. Software OperationSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD 07

1

5

23

4

6

STEP 1 : Select the COM Port of the actual connected deviceSTEP 2 : Select the Model name according to the device you are using ( AR-888-H / Node ID 001 as example)STEP 3 : Enter the Node ID of the controller.STEP 4 : Click “ Read EEPROM User” button to start to read data from controller.STEP 5 : The bar indicates the reading status.STEP 5 : After completed, name the data in . EEP file format and save.

Read EEPROM Data of H Series Controller4-3

4. Software OperationSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD08

1

5

23

4

STEP 1 : Select the COM Port of the actual connected device.STEP 2 : Select the Model name according to the device you are using ( AR-888-H / Node ID 001 as example).STEP 3 : Enter the Node ID of the controller.STEP 4 : Click “ Write EEPROM User” button.STEP 5 : Select the data .EEP File you want to write and start.

Write EEPROM Data of H Series Controller4-4

4. Software OperationSOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD 09

STEP 6 : Until the progress bar is completely green , it means the writing program is completed.

4. Software Operation / 5. Reference

FAQ

YouTube Videos

5-1

5-2

How to read the card user data from 721H mode 6 and then write into another 721H?

Why one error message＂ File Type didn´t Match the Target CPU，Update ISP

Tools to latest version,Please!:721C＂?

How to reset master code if I forgot it ?

How do I upgrade AR-401E firmware?

《Firmware Updating》ISP Tools & UDP Updater Setting step

5. Reference

SOYAL Software Series

ISP Tool

SOYAL TECHNOLOGY CO., LTD10