software nauticus hull - 3d beam - dnv gl · nauticus hull - 3d beam software dnv gl as, ... the...

© xxx SAFER, SMARTER, GREENER NAUTICUS HULL - 3D BEAM SOFTWARE DNV GL AS, [email protected], www.dnvgl.com/software Version 09.01.14 Course code: NA-08 Duration: 0.5 days Prerequisite: Basic understanding of the FE method and strength calculations. The course is a presentation of the 3-dimensional frame structure analysis program 3D Beam. This program can be used at an early stage for evaluation of strength of ship frames, as well as grid structures and frame structures in general. The course will describe how to create geometry, apply proﬁles, material, loads etc., and present the analyses results in way of displacements and beam forces and stresses. The course will be a combination of lectures and hands-on training. The hands-on training will be a detailed step-by-step description of the modelling and analysis process. DESCRIPTION LEARNING OBJECTIVES After the course you should be able to carry out beam element analysis using 3D Beam. TARGET GROUP Naval architects, designers, hull structural engineers and approval engineers with no or limited experience in using Nauicus Hull.

Upload: phamdien

Post on 27-Jul-2018

360 views

Category:

Documents

4 download

Report

Download

Embed Size (px):

TRANSCRIPT

SAFER, SMARTER, GREENER

NAUTICUS HULL - 3D BEAMSOFTWARE

DNV GL AS, [email protected], www.dnvgl.com/software Version 09.01.14

Course code: NA-08Duration: 0.5 days

Prerequisite: Basic understanding of the FE method and strength calculations.

The course is a presentation of the 3-dimensional frame structure analysis program 3D Beam. This program can be used at an early stage for evaluation of strength of ship frames, as well as grid structures and frame structures in general. The course will describe how to create geometry, apply profiles, material, loads etc., and present the analyses results in way of displacements and beam forces and stresses.

The course will be a combination of lectures and hands-on training. The hands-on training will be a detailed step-by-step description of the modelling and analysis process.

DESCRIPTION

LEARNING OBJECTIVES

After the course you should be able to carry out beam element analysis using 3D Beam.

TARGET GROUP

Naval architects, designers, hull structural engineers and approval engineers with no or limited experience in using Nauicus Hull.

Nauticus Project - A Management Tool for Shipbuilding

DIGITAL SOLUTIONS NAUTICUS™ MACHINERY - DNV GL...Guidelines 0038 (Calculation of shafts in marine applications) and 0041 (Ice strengthening of propulsion machinery). The calculation

Apresentação Nauticus Hull Rule Check

NAUTICUS™ MACHINERY HHM RELIES ON NAUTICUS MACHINERY · The modules used are Nauticus Machinery Shaft Alignment and Nauticus Machinery Shaft Fatigue, that they started using in

Sail Trim Theory 2015 - Sail Nauticus

Apresentação Nauticus Hull FEA (CSR Tank)

Nauticus Hull - Steel Plates Unstiffened