solar home lighting with any level dimmingemiit.com/wp-content/uploads/2016/emiit_shl3.pdf · shl3...
TRANSCRIPT
WWW.EMIIT.COM | [email protected] | 0091 9025 888 881
SHL3 - Solar Home Lighting
3 x 1W LED LAMPS + 1 USB PORT with 10w Solar Panel
Solar Home Lighting with any level dimming from 1W to 0.1W.
8 hours backup at 3 x 1W LEDs in 100% brightness
16 hours backup at 3 x 1W LEDs in 50% brightness
32 hours backup at 3 x 1W LEDs in 25% brightness
80 hours backup at 3 x 1W LEDs in 10% brightness
Two lamps each is fitted with 5 meters cable and another lamp is fitted with 8 meter cable to cover larger area of home indoor and outdoor. The lamps are water proof with Ingress Protection Rating – IP 62 as per IEC 60529. The system comes with 1 USB A type, 5.1v 600mA output capacity. The product includes 8W solar panel with 5 meter cable and a multi-link USB cable.
Salient Features:
• MPPT solar charging technology • 10W Solar Panel – bigger & faster charging • Li-ion battery bank for quick charging • Readable LED Indications for battery status • Solar intensity indication for better panel placement • Dual Charging: Solar Panel and/or AC Adapter charging • Constant Current Constant Voltage Charging for battery • 6500K Cool White LEDs made for more brightness. 110 lumens per watt • Longer Lasting LEDs. Lifetime >40,000 hours • Any Level Dimming from 1W to 0.1W • IP 62 rated lamps for outdoor use • 1 USB port. 5.1v 600mA output. • Over Charge and Deep Discharge protection • Short circuit and overload protection • User Friendly Plug & Play Operation
WWW.EMIIT.COM | [email protected] | 0091 9025 888 881
The SHL3 comes with:
1. 2 x 1W LED lights each with 5 meters cable 2. 1 x 1W LED light with 8 meters cable 3. 10W Solar Panel with 5 meters cable 4. USB Multi-line charging cable 5. Controller unit 6. User manual
Data Sheet:
Model SHL3
CONTROLLER SPECIFICATIONS
Charging Type Maximum power point tracking (MPPT),maintains CC-CV for charging
Input terminal Dual Source: Solar Input & AC Adaptor Input 2.1mm dia sockets
Load terminal 3 PORTS for LED lamps and 1 Mobile Charging port
System On/Off Manual Switch
BATTERY SPECIFICATIONS
Battery Type Lithium –ion
Battery Voltage 3.7V
Battery Capacity 7800mAh
Max Charge Current 2000mA
Max. Discharging Current 2000mA
Max. Battery voltage 4.2±0.05V
Load Disconnect Voltage 3.1±0.05V
Backup hours when charged fully 8 hours for light load (Time varies depends on USB port usage)
WWW.EMIIT.COM | [email protected] | 0091 9025 888 881
SOLAR PANEL SPECIFICATIONS
Panel Power 10W SPV with 5 meters cable
Open circuit voltage (Voc) 24.2V (subject to change)
Voltage at max. power (Vmp) 19.6V (subject to change)
Current at max power (Imp) 510mA (subject to change)
Short Circuit current (Isc) 610mA (subject to change)
MOBILE CHARGING SPECIFICATIONS
USB Ports 1 NO; USB Type A
Max output Voltage 5.1V±0.1V
Max Current 600mA
1W LED LAMP SPECIFICATIONS (Total 3 LED Lamps Provided)
Operation Voltage 9.6V max @ 150mA
Output 1W, 110 Lumens
Light Color Cool White (6,500K)
Dimming Linear from 1W to 0.1W
Ambient Temperature 0°C to +50°C while charging; -20°C to +50°C while discharging
Efficiency >95% peak
Connector Cables with 2.5mm DC jack 5 meters cable for each of two lamps and 8 meters cable for another lamp
Type of Protection IP62
PACKAGING BOX
Dimension (L X W X H) 330x110x420mm
Weight 3.650Kg Liabilities Exclusion: The information mentioned is subject to change without notice.