solidcheck. the concrete measuring device. - meva … · your benefits and advantages. ... labour...
TRANSCRIPT
Powered by MEVA
SolidCheck. The Concrete Measuring Device. Portable, precise measurement of concrete setting time.
More accurate than any thumb!
3
SolidCheck. More Accurate than Any Thumb.
The Knead-Bag Test is Obsolete.
Guesswork by rule of thumb is obso-
lete at last: SolidCheck brings time
saving and safety
Today‘s concrete standards demand that fresh
concrete pressure is determined to specify the
maximum concrete pouring speed. To do so, the
site needs to know what time the concrete needs
to set (solidify). Up to now, concrete setting time
was determined by pressing your thumb into
a sample of concrete in a knead-bag every half
hour, hence the name knead-bag test. The results
are inaccurate and subjective with the result that
a 25 % safety span was added on top.
The portable mobile measuring device
that determines the exact setting time
for fresh concrete
SolidCheck‘s innovative, computer controlled
ultrasonic technology delivers reliable, precise
data on concrete setting time. Thus, the actual
fresh concrete pressure can be established and
the supervisor is able to utilize the formwork‘s
load capacity safely and to a full extent. This
saves time and money. Safety spans and work-
flow delays are a thing of the past; the building
process is easier to plan and monitor.
5
SolidCheck. Portable Real-Time Measurement.
Safe Function. Easy Operation.
SolidCheck is battery-operated, comes in a sturdy carry case for on-site operation
and is designed to measure concrete setting time under real on-site conditions.
Operating SolidCheck is simple: A concrete
sample from the batch destined for the pour
is filled into the test cube. By pressing the GO
button, the ultrasonic measuring cycle is star-
ted. This happens under real site and tempera-
ture conditions. At the end of the cycle, the ex-
act time that the concrete needs to set appears
in the display.
SolidCheck measures the concrete setting time
in real time: If the concrete needs 8.5 hours
to set, SolidCheck will monitor the concrete
for exactly that length of time. At the moment
the concrete has actually finished setting, the
SolidCheck display will show the exact set-
ting time of 8.5 hours. There is no simulation,
vague extrapolation or calculation. And time-
consuming safety spans are a thing of the past.
6
Safety for every concrete pour thanks to accu-
rate measuring data.
SolidCheck works for all concrete types in use on
site today, including self-compacting and flowable
types. The measurement complies with today‘s con-
crete standards, including the DIN 18218 standard.
Safety spans and risk margins are no longer needed.
The site can proceed with fast, safe pours.
Full and safe utilization of the formwork‘s
concrete load capacity
No risk of overload: the formwork‘s concrete load
capacity can be fully and safely utilized at all
times. The site can choose the formwork with the
optimum load capacity. This saves labour, time and
money while improving safety.
Sturdy, compact carry case enables measure-
ment in real time and on site
SolidCheck delivers concrete setting time in hours
and minutes, under real temperature conditions.
Measurement is conducted on the concrete type and
batch actually destined for the pour. The benefit is:
reliable and real data. The sensitive measurement
technology is encased in a sturdy carry case for por-
table use on any site.
Improving safety and saving time while enab-
ling the fastest possible pouring rate
By measuring the exact concrete setting time, Solid-
Check enables the site to utilize the fastest possible
concrete pouring rate safely and precisely. This gain
in time is particularly noticeable with high pours.
SAFE, UNIVERSAL
SAFE, FAST
SAFE, COST EFFECTIVE
SAFE, MOBILE
More accurate than any thumb!
7
SolidCheck. Your Benefits and Advantages.
Before: WITHOUT SolidCheck
Guessing concrete setting time using the
knead-bag test: inaccurate results that vary
from thumb to thumb.
25 % safety span added to assumed concrete
setting time. 25 % more time and delays in
work flow on site.
Uncertainty about when the concrete has
actually set leads to overdimensioning the
formwork – the 2. unnecessary safety span.
The site will tend to pour the concrete more
slowly than the formwork would actually
permit. The 3. unnecessary time loss.
From now on: WITH SolidCheck
Concrete setting time measured on the batch
delivered – precisely in hours and minutes.
The 25 % safety surcharge on concrete setting
time calculated as demanded by the standard
DIN 18218 is no longer needed.
SolidCheck enables the site to choose e.g. a
formwork system with 70 kN/m2 concrete
load capacity instead of one with 100 kN/m2
and to utilize this capacity safely and fully.
SolidCheck enables the site to exploit the
maximum pouring rate safely and fully.
SolidCheck puts an end to safety surcharges.
The site can proceed with fast, safe pours.
Calculation without SolidCheck
Concrete setting time assumed at 7.5h
(including 25% safety surcharge), enabling
concrete pouring rate of 1m/hour
6 hours per pour cycle.
Calculation with SolidCheck
Concrete setting time measured at 6h,
enabling concrete pour rate of 1.33m/hour.
4.5 hours per cycle, 8 pour cycles
Time saving: 1.5h
Time and cost saving:
Time saved with SolidCheck: 1.5h/pour
Site team 4 x 1 workers
Labour costs: € 35/h
Time saving in 8 pour cycles: € 1.680,–
SolidCheck facilitates safe, fast pours, smooth
workflow and saves time and money:
SolidCheck. The concrete measuring device. Supplied by:
MEVA Schalungs-Systeme GmbH Industriestraße 5 | D-72221 Haiterbach Phone +49 7456 692-01 | Fax +49 7456 692-66 www.solidcheck.de | [email protected]
More accurate than any thumb!